huawei separate mount installation
DESCRIPTION
huaweiTRANSCRIPT
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Security Level:
www.huawei.com
Separate Mount Installation
CONTENT
• 1+0 (7G~38G)• 1+1 (7G~38G)• 1+0 /1+1 (6G)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 3
1+0 (7G~38G)
Plan Document
Identify the Polarization Mode
Change
No Change
Change Antenna Polarization
Assemble Antenna and
Adaptor
Install Flexible Waveguide
Connect IF Cable
Install ODU Adaptor
IF Waterproof and Grounding
skip this step when using separate antenna.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 4
1+0 (7G~38G)
Separate antennaCan install waveguide directly
Compact antennaCan not install waveguide directly
Antenna Introduction
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 5
1+0 (7G~38G)• Install Antenna and Adaptor ( skip this step when using the separate antenna)
Applying an appropriate lubricant the gasket of the feed boom.
Apply an appropriate lubricant to the gasket of the feed boom.
Remove the protective caps.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 6
1+0 (7G~38G)• Install Antenna and Adaptor
Installing the antenna adapter onto the antenna (The antenna adapter is required only when the waveguide interface is unavailable on the antenna.).
Keep the polarization direction of the antenna adapter consistent with that of the antenna.
① Install the antenna adapter onto the antenna.
② Close the four latches cornerwise.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 7
1+0 (7G~38G)• Install Antenna and Adaptor
Compact antenna with adaptor Separate antenna (needn’t adaptor)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 8
1+0 (7G~38G)• Install ODU and Adaptor
Installing the ODU adapter onto a proper position on the antenna pole.
Apply an appropriate lubricant to the gasket of the feed boom.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 9
1+0 (7G~38G)• Install ODU and Adaptor
Installing the ODU to the ODU Adaptor.
The “V” should be keep upwards.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 10
1+0 (7G~38G)• Install the Flexible Waveguide
Applying an appropriate lubricant to the gasket of the flanges at both ends of the flexible waveguide.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 11
1+0 (7G~38G)
CAUTION: The flexible waveguide can be bent only within its maximum bending angle and at the larger area side. The twisting angle of the flexible waveguide should not be larger than 90 degrees.
• Install the Flexible Waveguide
Keep the direction of the waveguide cavity of the flexible waveguide consistent with that of the adapter.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 12
1+0 (7G~38G)• Install the Flexible Waveguide
Keep the direction of the waveguide cavity of the flexible waveguide consistent with that of the ODU adapter and antenna’s feeder flange.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 13
1+0 (7G~38G)
Flexible Waveguide
Flexible waveguide should be fixed.
• Install the Flexible Waveguide
CONTENT
• 1+0 (7G~38G)• 1+1 (7G~38G)• 1+0 /1+1 (6G)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 15
1+1 (7G~38G)Plan
Document
Identify the Polarization Mode
Change
No Change
Change Antenna Polarization
Assemble &Lift Antenna
Install Antenna Adaptor
Install Flexible Waveguide
Connect IF Cable
Install ODU Adaptor
IF Waterproof and Grounding
Install Coupler and ODU
skip this step when using separate antenna.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 16
1+1 (7G~38G)• Install Coupler and ODU
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 17
1+1 (7G~38G)• Install Coupler and ODU
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 18
1+1 (7G~38G)• Install Flexible Waveguide
CONTENT
• 1+0 (7G~38G)• 1+1 (7G~38G)• 1+0 /1+1 (6G)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 20
1+0/1+1 (6G)• Apply appropriate lubricant to the gasket on the flange interface of the antenna.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 21
1+0/1+1 (6G)• ODU Interface
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 22
1+0/1+1 (6G)• Installing the ODU onto the ODU bracket.• Installing the ODU on the pole.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 23
1+0 (6G) Installing the waveguide-to-coaxial converter.
The coaxial interface of the converter or the coupler must not face upwards.
Connecting the RF cable and Waterproofing the connectors.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 24
1+1 (6G) Installing the hybrid coupler.
The coaxial interface of the converter or the coupler must not face upwards.
Connecting the RF cable and Waterproofing the connectors.
Thank youwww.huawei.com