HUAWEI

HUAWEI Fixed Wireless Terminal

Data Service User Guide

V200R002

HUAWEI Fixed Wireless Terminal

Data Service User Guide

Manual Version 01 (2007-07-10)

Product Version V200R002

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters.

Huawei Technologies Co., Ltd.

Address: Administration Building, Huawei Technologies Co., Ltd.,

Bantian, Longgang District, Shenzhen, People's Republic of China

Postal Code: 518129

Website: http://www.huawei.com

Email: mobile@huawei.com

Copyright © Huawei Technologies Co., Ltd. 2007. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei

Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

About This Manual

Related Manuals

The following manuals provide more information about the HUAWEI Fixed Wireless Terminal.

Manual Content

HUAWEI Fixed Wireless Terminal User Guide

It provides information for the terminal installation, operation, usage and maintenance of FWT.

HUAWEI Fixed Wireless Terminal Data Service User Guide

It is used for assisting the users in performing data services of FWT. (Delivered with a CD-ROM)

Organization

HUAWEI Fixed Wireless Terminal Data Service User Guide introduces how to perform the data service of HUAWEI Fixed Wireless Terminal (hereinafter referred to as FWT).

Chapter 1 Overview describes the modem installation integrated with FWT.

Chapter 2 Wireless Data Service elaborates the operation of data service, including Connect management program installation, dial-up and PC fax service, etc.

Chapter 3 Precautions and Troubleshooting describes the precautions of data service conduct and introduces common faults and handling methods.

Intended Audience

The manual is intended for the user who owns the FWT Data Kit.

Environmental Protection

This product has been designed to comply with the requirements on environmental protection. For the proper storage, use and disposal of this product, national laws and regulations must be observed.

i

Contents 1 Overview ...............................................................................................................................1

Installation Overview ....................................................................................................1 PC Requirements ...........................................................................................................1

2 Wireless Data Service ...........................................................................................................2 Installing PTCL Connect ...............................................................................................2 Applying the Data Service ............................................................................................3

3 Precautions and Troubleshooting..........................................................................................8 Precautions.....................................................................................................................8 Troubleshooting.............................................................................................................8

1

1 Overview

Installation Overview The Fixed Wireless Terminal (FWT) has a built-in modem. Thus, you can browse Web pages or download data through a universal serial bus (USB) cable.

The usage ofyou need to in

the modem is as simple as a standard modem. Before accessing the Internet, stall the driver from the delivered CD. A USB cable is delivered with the data

kit. If ne

Note: a PC, see "Connecting the FWT to a PC" of HUAWEI l User Guide.

cessary, you can purchase a USB cable from a local dealer.

To connect a FWT with Fixed Wireless Termina

PC Requirements The configuration requirement of a PC is as follows:

1. CPU: Pentium 100 or above Operating 2. system (OS): Windows 98, Windows 2000 or Windows XP

. USB: USB1.1 or above Applications: Internet Explorer (IE) or a file transfer protocol (FTP) software is

installed

34.

2

2 Service Wireless Data

Installing PTCL Connect This chapter introduces how to install the PTCL Connect management program (hereinafter

and the hardware driver. The procedures are for your referred to as PTCL Connect) eref rence only.

Installing PTCL Connect 1. Use

Noing the program, y

stallation disk into the CD-ROM.

3. The

the USB cable to connect the FWT and a PC.

te: If the Win98 OS is in use, before install ou need to disconnect the FWT with the PC.

2. Put the in

setup program automatically starts. Then, the installation interface appears.

Note:

roceed. nse Agreement carefully. Then select I accept the terms of the license and click Next.

6. Sele

Note:

t box, enter the name. Then click Next. 8. If a prom re has not passed Windows Logo testing is

ontinumplete.

10. A short-cut icon

If the setup program does not automatically start, find the setup.exe file and double-click it to start the installation.

4. According to the instructions, click Next to p5. Read Lice

agreementct an installation path and click Next.

If you do not select a path, the default path is used. You can click Change to change the path.

7. In the Program Folder texpt indicating that the softwa

displayed, click C e Anyway to proceed. 9. Click Finish to co

appears on the PC desktop.

3

Note: If the Win98 OS is in use, after the FWT manager program is installed, you need to connect the FWT to the PC with the provided data cable.

Applying the Data Service You can apply and enjoy such data services as Web browse and PC fax service. For details, consult your service provider.

Configuring the Network Connection Before accessing the Internet, you need to configure the network connection. If you want to apply the default settings of PTCL Connect, you can skip operations in this section.

Creating a Profile 1. Use the USB cable to connect the FWT and a PC.

2. Double-click to access PTCL Connect.

3. Click Settings to access the configuration interface.

4

4. Click New to create a profile. Enter the profile name, number, username, and

password.

Modifying a Profile 1. In the home screen of PTCL Connect, click Settings to access the configuration

interface. 2. In the Choose Profile Name drop-down box, select a profile. Click Modify. 3. Modify the settings and click Save to save the result.

Deleting a Profile 1. In the home screen of PTCL Connect, click Settings to access the configuration

interface. 2. In the Choose Profile Name drop-down box, select a profile. Click Remove to

delete the profile.

5

Dialing Up 1. Click Settings to access the configuration interface. 2. Select a profile In the Choose Profile Name drop-down box or create a profile. Then

click OK. 3. Click Connect to dial up. After the login completes, you can access the Internet.

Caution: The Number, the Username, and the Password vary with networks. For details,

consult your service provider. The connection rate shown after the dial-up is connected may be the

connection rate of the serial port. For details, consult your service provider.

PC Fax Service You can send or receive a fax. You can select PC fax software freely.

Note: For the usage of PC fax software, see the description of particular software. This guide only describes operations on the FWT to use the PC fax function.

Preparations Before using the data service, do the following:

1. Install the modem driver on a PC. 2. Install the PC fax software on the PC. 3. Connect the USB port of the USB cable to a PC and the other side to the FWT.

Using the PC Fax Function Before faxing, set the baud rate of the serial port to 19200 bit/s. For detailed steps, see 0.

Setting the baud rate

Product Steps ETS2000 Series (with the SMS function)

1. Select Data Service> Data Rate. Then press <OK>.The baud rate is displayed.

2. Press or to set the baud rate to 19200 bit/s. 3. Press OK to save the setting.

6

ETS2000 Series (without the SMS function)

1. Press SET/STORE to enter the menu selection.

2. Use the left or right navigation key to select .3. Press SET/STORE to enter the parameter configuration. 4. Use the left or right navigation key to set the serial baud rate as

19200 bit/s. 5. Press SET/STORE to save the configuration.

ETS1000 Series

1. Enter the operation code ##43* through the phone connected

to the FWT (when you hear the dialing tone after picking up the handset).

2. Set the baud rate of the serial port to 19200 bit/s.

Note: If you unplug the USB cable and plug it to the FWT again, the baud rate of

the FWT is restored to 230400 bit/s. The baud rate of the FWT must be the same as that of the PC fax software.

For detailed steps, see the instruction of particular software.

Sending/Receiving a PC Fax Before the FWT receives or sends a PC fax, set the FWT to the fax mode. Then the FWT stays in the fax mode until you power off it. To use the voice services, turn off the fax mode. For detailed steps, see 0.

Setting / Exiting the fax mode

Product Steps ETS2000 Series (with the SMS function)

1. Select Data Service> FAX Mode. Then press OK. 2. Select one of the options to enable or disable the fax

mode. 3. Press OK to save the settings. 4. To turn off the PC fax data sending/receiving mode, press

END. You can also restart the FWT to restore to the voice mode

ETS2000 Series (without the SMS function)

1. Press SET/STORE to enter the menu selection.

2. Use the left or right navigation key to select . 3. Press SET/STORE to enter the status configuration. 4. Select one of the options to enable or disable the fax

mode.

7

Product Steps 5. Press SET/STORE to save the settings. 6. To turn off the PC fax data sending/receiving mode, press

END. You can also restart the FWT to restore to the voice mode.

ETS1000 Series

1. Enter the operation code ##32* through the phone connected to the FWT (when you hear the dialing tone after picking up the handset). After a beep sound is played, the FWT is set to the fax mode.

2. To exit the fax mode, enter the operation code ##30* through the phone connected to the FWT (when you hear the dialing tone after picking up the handset). You can also restart the FWT to restore to the voice mode.

3. After the FWT sends or receives a PC fax, enter the operation code ##90000* through the phone connected to the FWT (when you hear the dialing tone after picking up the handset to end the PC fax operation).

8

3 cautions and

Precautions

PreTroubleshooting

provider.

ord vary with networks. For details, consult your service

To access the Internet, you need to subscribe to the data service with your service

The username and the passwprovider.

While accessing the Internet, the line is in use. Thus, the voice service is unavailable. Before making a phone call, you need to disconnect the dial-up connection.

Troubleshooting At dia t the Modem does not respond.

nstalled.

r the dial-up

Ma xits, contact

prompt indithe access number of the high-speed

your service provider.

3. your service provider that you have subscribed to the data service.

1. Make sure that the USB cable is well connected. 2. Make sure that the data rate of both the PC fax software and the FWT is set to

19200 bit/s. 3. Make sure that the FWT is set to the fax mode. If you have any queries, consult your

service provider.

l-up, a prompt indicates tha1. Make sure that the FWT is powered on and the USB cable is well connected. 2. Make sure that the driver is properly i3. Make sure that the baud rate of the Modem serial port is set to the default value

230400 bit/s. Then restart the FWT.

A prompt indicates that the dial-up cannot be created ois not connected to the server.

ke sure that the username and password are correct. If the problem still eyour service provider.

A cates that the server does not respond. 1. Make sure that the number is correct, such as,

packet data service is "#777". For details, consult 2. It is possible that the server is busy. Try later.

Confirm with

You cannot send or receive a PC fax.

Version: V200R002_01, PTCL