huawei certification training catalog (subcontractors) v1.2
TRANSCRIPT
Huawei Certification Training Catalog(Partner)
COMMERCIAL IN CONFIDENCE 1
Huawei Certification Training Catalog (Partner)
Huawei Certification Training Catalog(Partner)
COMMERCIAL IN CONFIDENCE 2
HUAWEI Learning Service
2013
Huawei Certification Training Catalog(Partner)
COMMERCIAL IN CONFIDENCE 3
CONTENTS
1 IP Technology Certification Training ...................................................................................................................... 5
1.1 HCDA-HNTD (Huawei Certified Datacom Associate-HuaWei Networking Technologies and Device)
Training 5
1.2 HCDP-BCRN (Huawei Certified Datacom Professional-Building Carrier Routing Network) Training ........ 6
1.3 HCDP-BCAN (Huawei Certified Datacom Professional-Building Carrier Access Network) Training.......... 7
1.4 HCDP-BITN (Huawei Certified Datacom Professional-Building IP Telecom Network) Training ................. 8
1.5 HCIE (Huawei Certified Internetwork Expert-Improve Carrier Network Performance) Training................. 9
2 Cloud Computing Certification Training ................................................................................................................ 11
2.1 HCNA-HCTD (Huawei Certified Network Associate- Huawei Cloud Technologies and Device) Training.. 11
3 LTE Certification Training ....................................................................................................................................12
3.1 HCNA-LTE (Huawei Certified Network Associate — LTE) Training ........................................................12
3.2 HCNP-LTE (Huawei Certified Network Professional — LTE) Training ....................................................13
3.3 HCNP-EPC (Huawei Certified Network Professional — EPC) Training ..................................................14
4 Access Network ..................................................................................................................................................15
4.1 Huawei Certified Network Associate-Huawei Access Network Technologies and Device Training Outline
15
4.2 Huawei Certified Network Professional-Huawei Access Network Technologies and Device Training
Outline 15
5 Optical Network ..................................................................................................................................................16
5.1 Huawei Certified Network Associate-Huawei Optical Network Technologies and Device Training Outline
16
5.2 Huawei Certified Network Professional-Huawei Optical Network Technologies and Device Training Outline
16
6 Microwave Product .............................................................................................................................................17
6.1 Huawei Certified Network Associate-Huawei Microwave Technologies and Device Training Outline .......17
6.2 Huawei Certified Network Professional-Huawei Microwave Technologies and Device Training Outline ...18
7 Mobile Soft Switch ..............................................................................................................................................19
7.1 Huawei Certified Network Associate-Huawei Mobile Soft Switch Technologies and Device Training Outline
19
7.2 Huawei Certified Network Professional-Huawei Mobile Soft Switch Technologies and Device Training
Outline 20
8 NGN...................................................................................................................................................................22
8.1 Huawei Certified Network Associate-Huawei NGN Technologies and Device Training Outline................22
8.2 Huawei Certified Network Professional-Huawei NGN Technologies and Device Training Outline ...........24
9 MGW&SBC ........................................................................................................................................................25
9.1 Huawei Certified Network Associate-Huawei MGW&SBC Technologies and Device Training Outline .....25
10 USC ...................................................................................................................................................................27
10.1 Huawei Certified Network Associate-Huawei USC Technologies and Device Training Outline ................27
10.2 Huawei Certified Network Professional-Huawei USC Technologies and Device Training Outline ............28
11 SG .....................................................................................................................................................................29
11.1 Huawei Certified Network Associate-Huawei SG Technologies and Device Training Outline ..................29
Huawei Certification Training Catalog(Partner)
COMMERCIAL IN CONFIDENCE 4
11.2 Huawei Certified Network Professional-Huawei SG Technologies and Device Training Outline ..............30
12 GSM ..................................................................................................................................................................31
12.1 Huawei Certified Network Associate-Huawei GSM Technologies and Device Training Outline ...............31
12.2 Huawei Certified Network Professional-Huawei GSM Technologies and Device Training Outline ...........32
13 WCDMA .............................................................................................................................................................33
13.1 Huawei Certified Network Associate-Huawei WCDMA Technologies and Device Training Outline ..........33
13.2 Huawei Certified Network Professional-Huawei WCDMA Technologies and Device Training Outline ......34
14 CDMA ................................................................................................................................................................35
14.1 Huawei Certified Network Associate-Huawei CDMA Technologies and Device Training Outline .............35
14.2 Huawei Certified Network Professional-Huawei CDMA Technologies and Device Training Outline .........37
15 Wimax ................................................................................................................................................................39
15.1 Huawei Certified Network Professional-Huawei Wimax Technologies and Device Training Outline.........39
16 GSM RNP&RNO ................................................................................................................................................40
16.1 Huawei Certified Network Associate- Huawei GSM RNP&RNO Technology Training Outline .................40
16.2 Huawei Certified Network Professional - Huawei GSM RNP&RNO Technology Training Outline ............41
17 WCDMA RNP&RNO ...........................................................................................................................................42
17.1 Huawei Certified Network Associate-WCDMA RNP&RNO Training Outline ...........................................42
17.2 Huawei Certified Network Professional-WCDMA RNP&RNO Training Outline .......................................42
18 CDMA RNP&RNO ..............................................................................................................................................43
18.1 Huawei Certified Network Associate-Huawei CDMA RNP&RNO Technologies Training Outline .............43
18.2 Huawei Certified Network Professional-Huawei CDMA RNP&RNO Technologies Training Outline .........44
19 Microwave RNP ..................................................................................................................................................46
19.1 Huawei Certified Network Associate-Huawei Microwave RNP Technologies Training Outline .................46
19.2 Huawei Certified Network Professional-Huawei Microwave RNP Technologies Training Outline .............47
20 Site and Power System .......................................................................................................................................48
20.1 Huawei Certified Network Associate- -Huawei Site and Power System Technology and Device Training
Outline 48
21 Hybrid Power Supply ..........................................................................................................................................49
21.1 Huawei Certified Network Associate- Huawei Hybrid Power Supply Technology and Device Training
Outline 49
22 Hardware Installation Supervision (excluding RF products) ..................................................................................49
22.1 Huawei Certified Network Associate-Hardware Installation Supervision (excluding RF products) Training
Outline 49
23 Hardware Installation Supervision (including RF products) ...................................................................................50
23.1 Huawei Certified Network Associate-Hardware Installation Supervision (including RF products) Training
Outline 50
COMMERCIAL IN CONFIDENCE 5
1 IP Technology Certification Training
1.1 HCDA-HNTD (Huawei Certified Datacom Associate-HuaWei
Networking Technologies and Device) Training
Training Path
Target Audience
This program is intended for those who are to be
certified by HCDA exam
Prerequisites
Be familiar with Windows operating system
Know the basic function and conception of
computer network
Objectives
On completion of this program, the participants will
be able to:
Describe the hierarchical structure of IP
network and the function of each layer
Describe Ethernet evolution and relative
technology
Outline network security and firewall concepts
Describe TCP/IP model, the function of each
layer, the function and the working principle of
some common protocols
Describe ICMP working principle
Describe Router and Switch working principle
Describe the basic principle and configuration
of VLAN, STP, VRRP, Static Route, RIP, OSPF,
PPP, Frame Relay
Design IP addresses with IP address
subnetting technology
Apply ping, tracert in network maintenance and
basic troubleshooting
Configure IP address, VLAN, VRRP, Static
Route,RIP,OSPF in VRP platform
Locate and handle the simple fault
Choose Huawei routers for each layer of IP
network
Duration
8 working days
Class Size
Min 6,max 12
HCDA-HNTD (Huawei Certified Datacom
Associate-Huawei Networking Technologies
and Device)
Lecture, Hands-on exercise
8 d ODC01
COMMERCIAL IN CONFIDENCE 6
1.2 HCDP-BCRN (Huawei Certified Datacom Professional-Building
Carrier Routing Network) Training
Training Path
Target Audience
This program is intended for those who are to be
certified by the HCDP-BCRN exam
Prerequisites
Have got the HCDA certification or have
equivalent technical level
Objectives
On completion of this program, the participants will
be able to:
Flexibly apply the VLSM technique to design IP
addresses
Flexibly apply the CIDR technique to aggregate
the routes
Describe the IPv6 basic packets and the IPv6
address structure
Describe the basic protocol of IPv6 (ICMPv6,
ND, IPv6 address allocation protocol)
Describe the working principle of OSPFv2/v3
routing protocol
Describe several OSPF special areas
Troubleshoot OSPF neighbor relationship
failures and routing failures
Describe the working principle of ISIS routing
protocol in IPv4 and IPv6
Troubleshoot ISIS common neighbor relations
failure and routing failures
Configure OSPF and ISIS in VRP platform to
realize the IP connectivity of the large network
Describe the working principle of BGP and
MP-BGP for IPv6
Configure BGP/MP-BGP for IPv6 in VRP
platform and use BGP route attributes and
route policy to select and filter routing in large
network based on demand
Describe the working principle and function of
BGP route reflector and confederation
Describe the BGP multi-homed basic concepts
and application scenarios
Troubleshoot the BGP peer establishtion
failures,routing learning failures and path
selection failures
Flexibly apply the common route selection
tools(Access control
list,ip-prefix,as-path-filter,community-filter,route
-policy)
Describe the working principle of multicast
protocol(IGMP,PIM-SM,PIM-DM)
Configure IGMP/PIM-SM/PIM-DM in VRP
platform
Describe NE5000E/NE5000E-X16 series
hardware features
Describe NE80E/NE40E and NE40E-X series
hardware features
Select the appropriate Huawei middle and high
end routers based on the device performance
and service requirement to build the large
network and deploy the service
Locate and remove routing problems in large
scale IP network
Duration
9 working days
Class Size
Min 6,max 12
HCDP-BCRN (Huawei Certified Datacom
Professional-Building Carrier Routing Network)
Lecture, Hands-on exercise
9 d ODC02
COMMERCIAL IN CONFIDENCE 7
1.3 HCDP-BCAN (Huawei Certified Datacom Professional-Building
Carrier Access Network) Training
Training Path
Target Audience
This program is intended for those who are to be
certified by HCDP-BCAN exam
Prerequisites
Have got the HCDA certification or have
equivalent technical level
Objectives
On completion of this program, the participants will
be able to:
Describe the working principle of VLAN, GVRP,
QinQ, STP, RSTP, MSTP
Describe the working principle of PPP, PPPoE,
IPoE, IPoEoVLAN
Configure VLAN, GVRP, QinQ, STP, RSTP,
MSTP in VRP platform
Apply VLAN, GVRP, QinQ to access network to
implement user isolation and service
transportation
Apply STP, RSTP, MSTP in access network to
avoid loop
Deploy PPPoE, IPoE, IPoEoVLAN in access
network
Perform the troubleshooting about VLAN,
GVRP, QinQ, STP, RSTP, MSTP, PPPoE, IPoE,
IPoEoVLAN in access network
Choose appropriate Huawei switches and
BRAS devices in access network deployment
Duration
6 working days
Class Size
Min 6,max 12
HCDP-BCAN (Huawei Certified Datacom
Professional-Building Carrier Access Network)
Lecture, Hands-on exercise
6 d ODC03
COMMERCIAL IN CONFIDENCE 8
1.4 HCDP-BITN (Huawei Certified Datacom Professional-Building IP
Telecom Network) Training
Training Path
Target Audience
This program is intended for those who are to be
certified by the HCDP-BITN exam
Prerequisites
Have got the HCDA certification or have
equivalent technical level
Objectives
On completion of this program, the participants will
be able to:
Describe the features and performance of IP
bearer network
Describe the basic principle of MPLS
Describe the basic process of MPLS data
forwarding
Describe the basic concepts and principles of
the MPLS LDP
Description the MPLS LDP label management
mechanism and the loop protection mechanism
Configure MPLS LDP in VRP platform
Describe the basic concepts and basic
principles of the MPLS BGP VPN
Configure the MPLS BGP VPN in VRP platform
to realize the connectivity of the different sites
Configure the MPLS BGP VPN in the single
domain of the large IP bearer network to realize
private network users to access Internet
Master the troubleshooting methods of the
MPLS BGP VPN in control plane and data
plane
Describe the working principle and the four
components of MPLS TE
Configure MPLS TE in VRP platform
Describe the basic concepts of QoS and the
different QoS models
Describe the IP QoS technologies, such as
classification and marking,traffic policy and
shaping,congestion management and
avoidance,link efficiency mechanisms,etc
Describe the basic principle of the common HA
technologies, such as NSR, BFD, protection
switching technologies and VRRP
Duration
7 working days
Class Size
Min 6,max 12
HCDP-BITN (Huawei Certified Datacom
Professional-Building IP Telecom Network)
Lecture, Hands-on exercise
7 d ODC04
COMMERCIAL IN CONFIDENCE 9
1.5 HCIE (Huawei Certified Internetwork Expert-Improve Carrier Network
Performance) Training
Training Path
Target Audience
This program is intended for those who are to be
certified by the HCIE exam
Prerequisites
Have got the HCDP certification or have the
equivalent technical knowledge level
Objectives
On completion of this program, the participants will
be able to:
Describe NE5000E/80E/40E advanced routing
features
Configure NE5000E/80E/40E advanced routing
features
Troubleshoot NE5000E/80E/40E advanced
routing features
Describe MAN typical network structure and
routing design features
Deploy routing protocol in MAN
Optimize routing protocol deployment in MAN
Troubleshoot the typical Failure of routing
protocol in MAN
Describe NE5000E/80E/40E advanced MPLS
L3VPN and L2VPN features
Configure NE5000E/80E/40E advanced MPLS
L3VPN and L2VPN features
Troubleshoot NE5000E/80E/40E advanced
MPLS L3VPN and L2VPN features
Describe IGMP principle and configuration
Describe PIM-SM principle and configuration
Describe PIM-SSM principle and configuration
Analyse MSDP basic working principle
Describe MSDP RPF detection
Describe MSDP application
Describe Multicast VPN function and technical
solution
Describe MD VPN concepts and working
principle
Advanced MPLS VPN Features Principle
and Configuration
ODC06 7 d
ODC07 Lecture, Hands-on exercise 1 d
QoS Features Principle and Configuration
ODC08 Lecture, Hands-on exercise 1 d
ODC10
BRAS Access Service Features and
Realization
2 d Lecture, Hands-on exercise
IP MAN Design and Service Deployment
ODC11 Lecture, Hands-on exercise 4 d
Lecture, Hands-on exercise 2 d ODC09
HA Features and Configuration
Advanced Routing Features Principle and
Configuration
Multicast Features Principle and Configuration
Lecture, Hands-on exercise
Lecture, Hands-on exercise
ODC05 2 d
IP Bearer Network Design and Service
Deployment
Lecture, Hands-on exercise 4 d
ODC13
ODC12
HCIE Simulation Lab Examination
exercise 2 d
COMMERCIAL IN CONFIDENCE 10
Configure and troubleshoot MD VPN
Describe the QoS technology
Configure QoS in the NE series routers
Analyse and troubleshoot the common faults of
QoS configuration in the NE series routes
Describe the HQoS working principle in
NE5000E80E40E
Describe the HQoS scheduling process in
NE5000E80E40E
Describe the HQoS realization and application
Describe HA basic concepts and HA
classification
Describe BFD principles and typical
applications
Describe NSR principle
Describe the various protection switching
technology and in NE5000E80E40E product
Describe end-to-end HA features realization in
IP bearer network
Describe ME60&ME60-X series products
hardware
Describe ME60&ME60-X series products
Features
Describe the function of BRAS related
components
Analyse the ME60 PPP service working
process
Analyse the ME60 IP service working process
Analyse the ME60 Leased line service working
process
Describe the ME60 Multicast Feature and Realization
Describe IGP deployment in MAN
Describe IGP fast convergence deployment in
MAN
Configure and adjust OSPF/ISIS in MAN
Describe BGP deployment in MAN
Describe BGP RR deployment in MAN
Describe route control and route selection in IP
MAN
Configure and adjust BGP in MAN
Describe the devices and interfaces of core
network
Describe the solutions of IP bearer network
access part
Configure HA features of IP bearer core
network
Describe the fast convergence of routing
protocols
Describe the MPLS TE FRR and VPN FRR
technologies of IP bearer network backbone
Describe the GR technologies of IP bearer
network
Configure IGP/BGP and VPN of IP bearer core
network
Configure fast detection technologies of IP
bearer network
Configure fast convergence of routing protocols
Configure MPLS TE FRR and VPN FRR
technologies of IP bearer network backbone
Configure GR technologies of IP bearer
network
Describe different QoS requirement of different
services in IP bearer network
Describe end to end QoS realization in IP
bearer network
Configure end to end QoS in IP bearer network
Help candidates to be familiar with examination
mode,examination rules, and examination
environment
Duration
25 working days
Class Size
Min 2,max 6
COMMERCIAL IN CONFIDENCE 11
2 Cloud Computing Certification Training
2.1 HCNA-HCTD (Huawei Certified Network Associate- Huawei Cloud
Technologies and Device) Training
Training Path
Target Audience
This training program is intended for those who are
to take the HCNA certification exam.
Prerequisites
Be familiar IT foundation knowledge.
Objectives
After the completion of this program, participants
will be able to:
Describe Active Directory Service.
Describe Dynamic Host Configuration Protocol.
Describe Domain Name Service.
Describe the Linux File System Structure.
Performing Linux Directory Operations.
Performing Linux File Operations.
Administering User Account.
Performing System Resources Management.
Performing Basic Network Configuration.
Describe the hierarchical structure of an IP network and
the functions of each layer.
Describe Cloud Computing Use Cases.
Describe Cloud Computing Key Characteristics.
Describe the Basic Concepts of Server Virtualization.
Describe the Basic Concepts of Network Virtualization.
Describe the Basic Concepts of Storage Virtualization.
Describe the Basic Concepts of Cloud Storage.
Identify the Storage Access Protocols.
Describe the RAID Features.
Describe Backup and High Availability for Storage.
Describe the Position of Galax in SingleCLOUD.
Describe the Components of Galax.
Describe the Features of Galax.
Describe the Server Architecture.
Describe the Server PCBs.
Describe the Server Switch PCB.
Describe the Server Management PCB.
Describe the Features of Server.
Describe the Features of Storage Product.
Describe the Storage Architecture.
Describe the Storage Specification.
Describe the Features of Switch Product.
Describe the Switch Architecture.
Describe the Switch Specification.
Describe Galax8800 Operating System.
Performing System Login.
Performing System Management.
Performing Server Management.
Performing System Configuration.
Performing Virtualization Operations.
Viewing System Message.
Viewing System Alert.
Viewing System Log.
Understand the Management Port Features.
Performing Common Management Tasks.
Understand OceanStor Management Port Features.
Understand OceanStor Management Features.
Desktop Cloud Administration Training
5d Lecture, Hands-on
exercise
Fundamentals of Cloud Computing Training
2d Lecture DC02
DC05
IT Foundation for Cloud Computing Training (Optional)
2 d DC03
Lecture, Hands-on exercise
COMMERCIAL IN CONFIDENCE 12
Performing Common OceanStor Management Tasks.
Understand Switch Management Port Features.
Understand Switch Management Features.
Performing Common Switch Management Tasks.
Describe VDesktop6000 networking.
Describe VDesktop6000 structure and functions.
Describe VDesktop6000 service flow.
Perform VDesktop6000 count management.
Perform VDesktop6000 asset management.
Perform VDesktop6000 DDC management.
Perform VDesktop6000 system backup.
Perform VDesktop6000 performance management.
Describe TCs Terminal Types.
Describe TCs Characteristics.
Understand TC Configuration and Management.
Duration
9 workdays ( 2 days, optional + 7 days)
Maximum Class Size
12 persons
3 LTE Certification Training
3.1 HCNA-LTE (Huawei Certified Network Associate — LTE) Training
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNA-LTE certification exam and those
who hope to learn about basic LTE/SAE principles
and Huawei LTE equipment.
Prerequisites
Be familiar with basic wireless communication principles
Objectives
After the completion of this program, participants
will be able to understand:
Basic pinciple of LTE air interfaces
Huawei eNodeB product family and applications
Basic operation about Huawei eNodeB
Basic concepts of the EPC
LTE/EPC network architecture
Interfaces and protocols used in the EPC
EPC security mechanism
EPC QoS mechanism
Procedures of bearer establishment, update, and
release
Concepts and procedures related to EPC mobility
management
Concepts and procedures related to EPC session
management
Duration
6 workdays
Maximum Class Size
16 persons
6 d Lecture, Hands-on exercise
HCNA-LTE (Huawei Certified Network
Associate-LTE) Training
COMMERCIAL IN CONFIDENCE 13
3.2 HCNP-LTE (Huawei Certified Network Professional — LTE) Training
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNP-LTE certification exam and those
who hope to learn about detailed LTE principles
and Huawei LTE equipment.
Prerequisites
Be familiar with basic LTE principles
Objectives
After the completion of this program, participants
will be able to:
Understand structure of LTE /EPC
Understand detailed principle of LTE air interface
Understand functions of different layers in LTE air
interface
Understand functions and procedures of X1/S2 interface
Understand typical procedures in LTE such as
handovers
Perform Operations for HUAWEI LTE eNodeB such as
managing eNodeB alarms, tracing signaling, manage
eNodeB software, managing real-time monitoring and
etc.
Perform initial configuration and reconfiguration of
HUAWEI LTE eNodeB
Perform eNodeB troubleshooting
Duration
10 workdays
Maximum Class Size
16 persons
10d Lecture, Hands-on exercise
HCNP-LTE (Huawei Certified Network
Professional-LTE) Training
COMMERCIAL IN CONFIDENCE 14
3.3 HCNP-EPC (Huawei Certified Network Professional — EPC) Training
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNP-EPC certification exam and
those who hope to learn about detailed EPC
principles and Huawei EPC equipments.
Prerequisites
Be familiar with basic EPC principles
Objectives
After the completion of this program, participants
will be able to:
Describe system structure and hardware structure of
USN9810
Perform software related installation and upgrade
procedure
Perform hardware operation and maintenance
Perform the routing operation and maintenance
including security management, system information
management, alarm management, trace management ,
data management, license management ,performance
management
Describe the functions of protocol stacks of different
interfaces
Perform configuration of USN hardware, System
Information, interworking with eNodeB, HSS, MME,
S-GW, DNS, NTP
Perform configuration of mobility management and
session management
Describe system structure and hardware structure of
UGW9811
Perform software related installation and upgrade
procedure
Perform hardware operation and maintenance.
Perform the routing operation and maintenance
including authorization management, system
information management, alarm management, trace
management ,log management, license
management ,patch management ,data backup and
restore
Perform data configuration of S1-U&S11,S5S8 and SGi
interfaces .Describe basic concept of VPN,APN and
charging
Perform configuration of VPN ,APN and charging
Describe the DPI principles ,content based charging
principles and PCC concepts
Perform configuration of the DPI function, service
control function and PCC
Describe HSS9820 product function and application
Perform HSS9820 configuration of subscription data.
Describe the steps of HSS9820 data configuration.
Perform HSS9820 hardware and system data
configuration.
Perform HSS9820 interface data configuration.
Duration
12 workdays
12d Lecture, Hands-on exercise
HCNP-EPC (Huawei Certified Network
Professional-EPC) Training
COMMERCIAL IN CONFIDENCE 15
Maximum Class Size 16 persons
4 Access Network
4.1 Huawei Certified Network Associate-Huawei Access Network
Technologies and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who
hope to learn about basic access network theory.
Prerequisites
Be familiar with windows operation system.
Know well about computer network
Understand basic data communication theory
Understand basic fiber communication theory
Objectives
After the completion of this program, participants
will be able to:
Understand xDSL/ATM/GPON/EPON/DataCom theory.
Be familiar with hardware construction, features, board
types, functions and interfaces
Know how to install/commission/configure access
equipment hardware.
Perform upgrade task under CLI of equipment.
Be familiar with HSI、IPTV、VOIP acceptance test.
Understand basic theory of NMS and SNMP, can use
NMS add and monitor equipment.
Duration
11 workdays
Maximum Class Size
16 persons
4.2 Huawei Certified Network Professional-Huawei Access Network
Technologies and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who
expect to learn more about the Access network
commissioning, maintenance and troubleshooting
Prerequisites
Function well on maintenance and commissioning of
Huawei equipments
13d Lecture, Hands-on exercise
H Huawei Access Network Technologies and Device Training
11 d Lecture, Hands-on exercise
Huawei Access Network Technologies and
Device Training
COMMERCIAL IN CONFIDENCE 16
Be familiar with access network communication theory
Objectives
After the completion of this program, participants
will be able to:
Be familiar with HSI、IPTV、VOIP test item and test
function.
Be familiar with problem locating on
xDSL/ATM/GPON/EPON
Be familiar with problem maintenance of access network
products.
Perform data plan and network design for FTTx.
Be familiar with the typical solutions for Access Network
migration and the usage of the migration tools
Be familiar with NMS installation, basic NMS service
configuration, NMS operating system and basic
database commands for troubleshooting of access
products.
Duration
13 workdays
Maximum Class Size
16 persons
5 Optical Network
5.1 Huawei Certified Network Associate-Huawei Optical Network
Technologies and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who
want to take the HCNA certification exam and
those who hope to learn about basic optical
network principles .
Prerequisites
Be familiar with windows operation system.
Know well about computer network
Understand basic data communication theory
Understand basic fiber communication theory
Objectives
After the completion of this program, participants
will be able to:
Understand SDH/WDM/data communication theory.
Be familiar with hardware construction, features, board
types, functions and interfaces
Know how to install/commission/configure optical
equipment hardware.
Understand DC tool, board-level loading and simulation
package loading of software.
Be familiar with MSTP/HMSTP/WDM acceptance test.
Understand basic theory of NMS and SNMP, can use
NMS add and monitor equipment.
Duration
15 workdays
Maximum Class Size
16 persons
5.2 Huawei Certified Network Professional-Huawei Optical Network
Technologies and Device Training Outline
15 d Lecture, Hands-on exercise
Huawei Optical Network Technologies and
Device Training
COMMERCIAL IN CONFIDENCE 17
Training Mode
Target Audience
This training program is intended for those who
want to take the HCNP certification exam and
personnel who expect to learn SDH and WDM
network commissioning, maintenance and network
reconstruction
Prerequisites
Function well on maintenance and commissioning of
huawei equipments
Be familiar with optical network communication theory
Objectives
After the completion of this program, participants
will be able to:
Be familiar with MSTP/WDM test item and test function.
Be familiar with OAM/QoS feature and function of MSTP
Be familiar with problem locating on SDH/WDM
Be familiar with problem maintenance of optical network
products.
Be familiar with data collection and basic service
planning of optical product.
Be familiar with NMS installation, basic NMS service
configuration, NMS operating system and basic
database commands for troubleshooting of optical
products.
Duration
10 workdays
Maximum Class Size
16 persons
6 Microwave Product
6.1 Huawei Certified Network Associate-Huawei Microwave
Technologies and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNA-HMTD certification exam and
those who hope to learn about Huawei microwave
equipment operation and maintenance.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
After the completion of this program, participants
will be able to:
Describe the concept and characters of digital
microwave communication.
Describe the theory and function of every parts in the
digital microwave system.
List the networking application for digital microwave
systems.
Describe the Ethernet basic knowledge.
Describe the main characteristics of OptiX RTN 600.
Describe the system structure, function and application
of every unit in RTN 600.
List out the 1+1 protection technology in OptiX RTN 600
hybrid microwave network.
Describe the main characteristics of OptiX RTN 900.
Describe the system structure, functions and application
of every unit in RTN 900.
Describe the networking application under PDH/SDH
9 d Lecture, Hands-on exercise
Huawei Microwave Technologies and Device Training
10 d Lecture, Hands-on exercise
Huawei Optical Network Technologies and Device Training
COMMERCIAL IN CONFIDENCE 18
and hybrid microwave modes.
List out the protection technologies in OptiX RTN 900
network.
Describe the features and applications of the protection
technologies.
List out the installation procedure for RTN equipment.
Finish proper preparations before the commissioning.
Perform site commissioning of the OptiX RTN 900.
Perform system commissioning of the OptiX RTN 900.
Configure radio links of the OptiX RTN 900.
Configure TDM services of the OptiX RTN 900.
Configure Ethernet services of the OptiX RTN 900.
Configure SNCP/MSP/ERPS/LAG for OptiX RTN 900.
Outline the general safety precautions of OptiX RTN
900.
List the routine maintenance items of OptiX RTN 900.
Implement the maintenance operation of OptiX RTN
900.
Judge the common faulty in OptiX RTN 900.
Implement the software upgrade operation of OptiX
RTN 900.
Implement the data collection operation of OptiX RTN
900.
Monitor the RTN equipment via the NMS.
Duration
9 workdays
Maximum Class Size
16 persons
6.2 Huawei Certified Network Professional-Huawei Microwave
Technologies and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNP-HMTD certification exam and
those who hope to learn Huawei microwave
equipment.
Prerequisites
Take the HCNA-HMTD certification
Objectives
After the completion of this program, participants
will be able to:
Describe the classification of IP addresses.
Describe the basic principle of IP routing.
Describe the basic concepts of MPLS.
Describe the MPLS tunnel (LSP) creation procedure.
Outline the MPLS OAM functions.
Describe the basic concepts of PWE3.
Outline the typical PWE3 encapsulation format for TDM,
Ethernet and ATM services.
Outline the PWE3 application scenarios of OptiX RTN
900.
Outline the steps of RTN 900 service configuration in
packet plane.
Implement Ethernet service/CES service/ATM/IMA
services configuration in packet plane via NMS.
Implement QoS/OAM/Clock configuration via NMS.
Implement the Ethernet service test via smartbits.
Install the U2000 Single-Server System Software.
Describe the system structure of U2000.
Describe the general troubleshooting flow of OptiX RTN
900.
Outline the methods of faults analyzing and locating.
Perform the common troubleshooting for OptiX RTN
900.
Identifying Radio Link Faults.
Duration
7 workdays
Maximum Class Size
16 persons
7 d Lecture, Hands-on exercise
Huawei Microwave Technologies and Device Training
COMMERCIAL IN CONFIDENCE 19
7 Mobile Soft Switch
7.1 Huawei Certified Network Associate-Huawei Mobile Soft Switch
Technologies and Device Training Outline
Training Mode
Target Audience
MSOFTX3000 Field Maintenance Technicians,
First Line Maintenance Technicians or Routine
Maintenance Technicians/Engineers
Prerequisites
None
Objectives
After the completion of this program, participants
will be able to:
Outline the development of GSM and UMTS.
Describe the architecture of GSM and UMTS system.
Describe the Networking and Interfaces of GSM NSS
and UMTS R4.
Describe the fundamental of mobile softswitch
technology.
Describe basic call control flows in UMTS R4 network.
Describe various types of bearer establishment in
UMTS R4 network.
Describe basic calling flow in UMTS R4 network.
Describe the hierarchical structure of an IP network and
the functions of each layer.
Describe the MSOFTX3000 system structure, functions,
and key characteristics(CPCI).
Describe the function, indicators, ports and working
mode of each board(CPCI).
Explain the types and applications of different fibers and
cables(CPCI).
Describe the toggle switch in MSOFTX3000(CPCI).
Perform operation through LMT(CPCI).
Describe MSOFTX3000 data configuration method and
procedure(CPCI).
Edit the data configuration scripts of
MSOFTX3000(CPCI).
Perform hardware data configuration(CPCI).
GSM/UMTS Softswitch Fundamental
OWA02
1 d
Lecture
GSM/UMTS CS Commnication Flow
OWG3012
2 d
Lecture
MSOFTX3000 Basic Data Configuration
OWG24
4 d
Lecture, Hands-on exercise
MSOFTX3000 Routine Operation and Maintenance
OWG22
5 d
Lecture, Hands-on exercise
MSOFTX3000 Hardware System
OWG10
1 d Lecture
MSOFTX3000 Delta Training(ATCA)
OWG44
2 d
Lecture
UMG8900 Routine Operation and Maintenance
OWH22
2 d
Lecture, Hands-on exercise
UMG8900 Data Configuration
OWH30
2 d
Lecture, Hands-on exercise
UMG8900 Software&Patch Loading
OWH11
1 d
Lecture, Hands-on exercise
UMG8900 Hardware System
OWH10
1 d Lecture
COMMERCIAL IN CONFIDENCE 20
Perofrm local office data configuration.
Perform the data configuration to MGW, RNC, HLR and
PSTN.
Understand the usage of common commands.
Perform system data backup and restoration.
Perform daily alarm and statistic management task.
Understand the operation flow of parts replacement and
implementing technical protection measures.
Perform MSOFTX3000 parts replacement and check
the components running status.
Manage tracing tasks.
Perform the routine operation and maintenance tasks
(daily, weekly and monthly).
Understand troubleshooting procedure and common
troubleshooting methods.
Perform common hardware, interfaces, service
troubleshooting.
Describe the MSOFTX3000 system structure, functions,
and key characteristics(ATCA).
Describe the function, indicators, ports and working
mode of each board(ATCA).
Explain the types and applications of different fibers and
cables(ATCA).
Describe the toggle switch in MSOFTX3000(ATCA).
Perform operation through LMT(ATCA).
Describe MSOFTX3000 data configuration method and
procedure(ATCA).
Edit the data configuration scripts of
MSOFTX3000(ATCA).
Perform hardware data configuration(ATCA).
Describe the UMG8900 system functions, structures
and key characteristics.
Describe the function, indicators, ports and working
mode of each board.
Explain the types and applications of different fibers and
cables.
Describe the toggle switch in UMG8900.
Perform operation through LMT.
Perform UMG8900 Software&Patch Loading
Describe the UMG8900 data configuration method and
procedure.
Edit the data configuration scripts for UMG8900.
Execute the data configuration script.
Perform the dynamic data configuration and
modification.
Perform UMG8900 system data, interfaces data and
resource data configuration.
Perform system data backup and restoration, execute
MML commands, etc.
Understand the operation flow of parts replacement and
implementing technical protection measures.
Perform UMG8900 parts replacement and check the
components running status.
Manage tracing tasks.
Monitor alarms of UMG8900.
Perform the routine operation and maintenance tasks
(daily, weekly and monthly).
Understand troubleshooting procedure and common
troubleshooting methods.
Perform common hardware, interfaces, service
troubleshooting.
Perform UMG8900 software&Patch reloading and path
upgrading
Duration
21 work days
Maximum Class Size
16 persons
7.2 Huawei Certified Network Professional-Huawei Mobile Soft Switch
Technologies and Device Training Outline
COMMERCIAL IN CONFIDENCE 21
Training Mode
Target Audience
Core network commissioning engineers, operation
and maintenance engineers, optimization
engineers
Prerequisites
At least two years experience of operation and
maintenance of GSM NSS/UMTS CS or other
telecommunication equipments
A basic knowledge of mobile communication and soft
switch principle
Objectives
After the completion of this program, participants
will be able to:
Edit the data configuration scripts of MSOFTX3000.
Perform the dynamic data configuration and
modification.
Understand deeply number analysis concepts and
working principle in MSOFTX3000.
Perform number analysis configuration and testing task,
including call barring analysis, failure processing data,
equal access data, etc.
Understand deeply IN service concepts and processing
flow in MSOFTX3000.
Perform IN service configuration and testing task,
including DP data, SCP data, IN service data, IN
announcement data, etc.
Understand deeply IN service concepts and processing
flow in MSOFTX3000.
Perform IN service configuration and testing task,
including DP data, SCP data, IN service data, IN
announcement data, etc.
Understand deeply Dual-homing concepts, networking
modes and switchover modes in MSOFTX3000.
Use the emergency maintenance tools and platform,
and understand device and service emergency
maintenance procedure.
Perform complex hardware, interfaces, service
troubleshooting.
Describe BSSAP protocol stack and function.
Analysis main procedures of BSSAP (Paging, Initial MS
Message, Cipher Mode Control, Assignment, Handover,
Release, DTAP Message).
Describe Iu interface protocol stack and function.
Describe classification of RANAP messages.
Analysis Iu connection Management, RAB assignment,
SRNS Relocation
CS Domain MM, CC procedures in Iu Interfaces.
Perform protocol stack and main functions of SIGTRAN.
Analysis SCTP association establishment and close
flows.
Describe UA concepts introduction (AS, SG, IPSP, Entity,
Routing key).
Perform messages analysis of SCTP, M2UA, and
M3UA.
Describe H.248 Protocol stack and functions.
Perform message analysis of H.248 based on scenario.
Describe BICC protocol stack and functions.
MSOFTX3000 Emergency Maintenance
OWG36
1 d
Lecture, Hands-on exercise
MSOFTX3000 Troubleshooting
OWG38
2 d
Lecture, Hands-on exercise, Case
MSOFTX3000 Advanced Data Configuration
OWG30
2 d Lecture, Hands-on exercise
MSS Signaling Analysis
OWA04
5 d
Lecture, Hand-on practice
MSC POOL Training
OWG62
5 d Lecture, Case-study
UMG8900 Emergency Maintenance& Troubleshooting
OWH34
1 d
Lecture, Hands-on exercise
UMG8900 Fault Location&Networking
OWH36
5 d
Lecture, Hands-on exercise, Case
COMMERCIAL IN CONFIDENCE 22
Analysis key parameters of BICC.
Analysis BICC message.
Describe MSC Pool networking.
Describe principles related to the MSC Pool features.
(The load balancing of MSC Pool, Handover in MSC
Pool, Disaster tolerance in MSC Pool, Subscriber
migration in MSC Pool, A-Flex by the MGW, Managing
A-Interface Circuits on the MGW, Charging based on
Virtual MSC IDs or Location Areas).
Describe MSC Pool configuration flow overview.
Perform MSC Pool feature configuration in MSC Server
and MGW.
Perform MSC Pool configuration based on different
scenarios (NNSF implemented by RNC, NNSF
implemented by MGW, Restructure MSC Pool based on
current network).
Monitor MSC Pool Load in real time.
Operate performance report of the MSC Pool.
Perform migration of subscribers.
Perform MSC Pool configuration synchronization
between NE and M2000.
Perform end-to-end tracing of calls on the MSC Pool.
Perform the dynamic data configuration and
modification.
Check the data configuration correctness and validity.
Use the emergency maintenance tools and platform,
and understand emergency maintenance procedure.
Handle UMG8900 device and service fault and perform
emergency recovering.
Perform complex hardware, interfaces, signaling,
service networking troubleshooting.
Duration
21 workdays
Maximum Class Size
16 persons
8 NGN
8.1 Huawei Certified Network Associate-Huawei NGN Technologies and
Device Training Outline
Training Mode
OAX01 20 d Lecture, Hands-on exercise
Huawei NGN Primary Training
COMMERCIAL IN CONFIDENCE 23
Target Audience
This training program is intended for those who are
to take Huawei NGN Primary certification exam
and those who hope to learn about basic NGN
principles and Huawei NGN equipment.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
After the completion of this program, participants
will be able to:
Principle
Describe the basic concepts, system architecture,
services, networking and applications of NGN.
Outline the components, services, networking and
applications of Huawei U-SYS solution.
Explain the functions, features, applications, terms,
stack structure and messages of NGN protocols (MGCP,
H.248, SIP, SIGTRAN).
Product Introduction
Describe the network topology, services, functions,
system structure, board functions, board indicators,
networking, applications and technical specifications of
SoftX3000/UMG8900/SG7000/MRS6100/SE2300.
Describe the network topology, services and functions of
U-Path.
Basic Data Configuration
Perform the hardware and local office data configuration
of SoftX3000.
Perform the hardware data configuration, MGW data
configuration and IP bearer data configuration.
Perform the hardware data configuration of MRS6100.
Perform the hardware data configuration and local office
data configuration of SG7000.
Data Configuration & acceptance testing
Outline the service data configuration steps of
SoftX3000, and execute the common service data
configuration (charging data configuration, media
gateway data configuration, protocol data configuration,
SS7 signaling data configuration, routing data
configuration, trunk data configuration, number analysis
data configuration, subscriber data configuration).
Outline the service data configuration steps of
UMG8900, and execute the common service data
configuration (TG data configuration, SG data
configuration).
Outline the service data configuration steps of
MRS6100, and execute the system data configuration
and the voice file loading.
Outline the service data configuration steps of SG7000,
and execute the common service data configuration
(MTP data configuration, M3UA data configuration).
Outline the service data configuration steps of SE2300,
and execute the common service data configuration
(SNMP data configuration, signaling PROXY and media
PROXY data configuration).
Perform the software installation and the service
configuration of U-Path.
Maintenance & Troubleshooting
Perform the routine operation and maintenance of
SoftX3000 (operator authority management, database
backup and restoration, data consistent checking
between the host and BAM, log management, alarm
management, device management, media gateway
management, protocol and signaling management,
trunk circuit management, subscriber management, bill
management).
Perform the routine operation and maintenance of
iGWB.
Perform the routine operation and maintenance of
UMG8900 (database backup, log management, alarm
management, device management, protocol tracing,
service management).
Perform the routine operation and maintenance of
MRS6100 (log management, alarm management,
device management, message tracing).
Perform the routine operation and maintenance of
SG7000 (database backup, log management, alarm
management, device management, signaling tracing).
Perform the routine operation and maintenance of
SE2300 (log management, alarm management, device
management, signaling PROXY and media PROXY
debugging).
Perform the routine operation and maintenance of
U-Path (log management, system status browsing, and
bill management).
COMMERCIAL IN CONFIDENCE 24
Perform the common troubleshooting of NGN
equipment.
Duration
20 workdays
Maximum Class Size
16 persons
8.2 Huawei Certified Network Professional-Huawei NGN Technologies
and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who
have pass the Huawei NGN Primary certification
exam and those who hope to learn about in-depth
NGN principles and Huawei NGN equipment.
Prerequisites
Successfully pass the Huawei NGN Primary certification
exam
At least a half year of experience in the operation and
maintenance of NGN
Objectives
After the completion of this program, participants
will be able to:
Principle
Explain the command parameters and call processing
procedure of NGN protocols.
Describe the principle, application of NGN dual home.
Describe the NGN C4 and C5 office migration solution.
Product Introduction
Describe the working principle and service processing
procedure of SoftX3000.
Describe the principle, processing procedure, operation
and original bill format of NGN charging system
Describe the system structure and configuration of
iGWB.
List the means of improving voice quality of NGN.
Describe the working principle and service processing
procedure of UMG8900.
Describe the working principle, announcement principle
and service processing procedure of MRS6100.
Basic Data Configuration
Execute the service data configuration of SoftX3000
(number changing data configuration, call barring data
configuration).
Perform the language conversion of voice and voice
loading of MRS6100.
Execute the service data configuration of SG7000 (MTP
load sharing data configuration).
Data Configuration & acceptance testing
Perform data planning and data configuration of NGN
dual home.
Perform the NGN C4 and C5 office migration operation.
Maintenance & Troubleshooting
Perform the routine maintenance of NGN dual home.
Perform the common problem analysis and processing
of NGN protocols.
Perform the troubleshooting of NGN network.
Duration
11 workdays
Maximum Class Size
16 persons
OAX02 11 d Lecture, Hands-on exercise
Huawei NGN Secondary Training
COMMERCIAL IN CONFIDENCE 25
9 MGW&SBC
9.1 Huawei Certified Network Associate-Huawei MGW&SBC
Technologies and Device Training Outline
Training Mode
Target Audience
UMG8900&SBC Field Maintenance Technicians,
First Line Maintenance Technicians or Routine
Maintenance Technicians/Engineers
Prerequisites
At least one year experience of operation and
maintenance of GSM NSS/UMTS CS or other
telecommunication equipments
Being familiar with Windows operation
A basic knowledge of mobile communications
Objectives
On completion of this program, the participants will
be able to:
Know about WCDMA Core Network Evolution and main
versions;
Understand the network architecture and function entity
of GSM/R99/R4,and the interface and protocol;
Understand bearer and control separated
architecture;Understand the function and application of
MSOFTX3000 and UMG8900; Understand the
definition and architecture of NGN and every layer's
functions;Konw about the location of UMG8900 in NGN.
Understand SIGTRAN's function,M3UA's basic
concepts、function and application;
Understand M2UA's concepts、protocol stacks and main
parameters;
Understand UMG8900's TDM bearer and data
configuration of SG(MTP3-M3UA);
Understand SIGTRAN's function,M3UA's basic
concepts、function and application;
Understand M2UA's concepts、protocol stacks and main
parameters;
Understand UMG8900's TDM bearer and data
configuration of SG(MTP3-M3UA);
Describe the UMG8900 system functions, structures
and key characteristics.
Describe the function, indicators, ports and working
mode of each board.
Explain the types and applications of different fibers and
cables.
Describe the toggle switch in UMG8900.
Perform operation through LMT.
Perform UMG8900 Software&Patch Loading
Describe the UMG8900 data configuration method and
procedure.
Edit the data configuration scripts for UMG8900.
Execute the data configuration script.
Perform the dynamic data configuration and
modification.
Perform UMG8900 system data, interfaces data and
resource data configuration.
NGN/GSM/UMTS Softswitch Fundamental
OWA02
1 d
Lecture
UMG8900 Data Configuration
OWH30
2 d
Lecture, Hands-on exercise
UMG8900 Software&Patch Loading
OWH11
1 d
Lecture, Hands-on exercise
UMG8900 Hardware System
OWH10
1 d Lecture
UMG8900 Routine Operation and Maintenance
OWH22
2 d
Lecture, Hands-on exercise
SE2600 Operation and Maintenance
2 d Lecture, Hands-on exercise
OZD04
COMMERCIAL IN CONFIDENCE 26
Perform system data backup and restoration, execute
MML commands, etc.
Understand the operation flow of parts replacement and
implementing technical protection measures.
Perform UMG8900 parts replacement and check the
components running status.
Manage tracing tasks.
Monitor alarms of UMG8900.
Perform the routine operation and maintenance tasks
(daily, weekly and monthly).
Understand troubleshooting procedure and common
troubleshooting methods.
Perform common hardware, interfaces, service
troubleshooting.
Perform UMG8900 software&Patch reloading and path
upgrading
Describe related concepts of SBC, working principle of
full proxy.
Describe main functions and features of SE2600 in IMS
network.
Describe call flow analysis.
Describe hardware structure of SE2600.
Perform interconnection data configuration.
Perform service data configuration.
Perform maintenance tasks for SE2600.
Perform SE2600 troubleshooting.
Duration
9 working days
Class Size
max 16
COMMERCIAL IN CONFIDENCE 27
10 USC
10.1 Huawei Certified Network Associate-Huawei USC Technologies
and Device Training Outline
Training Path
Target Audience
SingelSDB GUHLR9820 project installation and
configuration Engineers;
Prerequisites
A basic knowledge of mobile communication
Objectives
On completion of this program, the participants will
be able to:
Understand System Structure and Principles:
Describe the architecture of Huawei SingleSDB system
Describe the Networking and Interfaces of Huawei
SingleSDB
Describe the hardware, logical structure of Huawei
SingleSDB
Describe the typical configurations of SingleSDB
products
List key advantages of Huawei SingleSDB products
Describe HLR9820 hardware structure
Describe all kinds of Buses in ATCA Platform
Describe HLR9820 boards function
Describe connections and cables
Perform System Installation:
Describe processes of System installation
Describe how Huawei SingleSDB system connected
internal and external
Perform Huawei HLR9820 system installation
Perform Huawei HLR9820 system debugging
Perform system data configuration:
Describe data configuration principles and steps
Describe GSM/UMTS network numbering scheme
Describe HLR9820 system hardware& software
configuration procedure and reliable specifications
Describe HLR9820 basic concept: Site, NE, Cluster,
Node and module
Perform Hardware Data Configuration
Perform Local Office Data Configuration
Perform Signaling Data Configuration
Understand HLR9820 Subscriber Management
Procedure:
Describe UMTS Common Service Feature
Perform operation of templates to manage subscribers’
profiles
Perform operation to manage subscribers’ profiles
Describe the HLR9820 subscriber management method
and procedure
Perform operation to modify services according to the
requests from subscribers
Perform Subscriber data management
Perform Operator Management
Perform Network maintenance
Perform operation to Check subscribers’ profiles based
on different fault phenomena
HLR9820V900R006 System Introduction
2 d
Lecture
HLR9820V900R006 System Installation
3.5 d
Lecture, Hands-on exercise
HLR9820V900R006 Data Configuration
3.5 d
Lecture, Hands-on exercise
HLR9820V900R006 Subscriber
Data Managemen
1d
Lecture, Hands-on exercise
COMMERCIAL IN CONFIDENCE 28
Duration
10 working days
Class Size
Min 5,max 15
10.2 Huawei Certified Network Professional-Huawei USC Technologies
and Device Training Outline
COMMERCIAL IN CONFIDENCE 29
Training Mode
Target Audience
Senior Technical Support Engineer;
Prerequisites
Successful completion of the program SingleSDB(G/U
HLR9820)Engineering Training
Or At least one year experience of HLR9820 operation
Objectives
On completion of this program, the participants will
be able to:
Describe the internal networking and IP planning of
HLR9820
Describe Redundancy Principle and Key parameters of
configuration
Describe DS Principle Data synchronization,
consistency and Replication Principle
Describe Baseline establishment, increment data
synchronization, recovery operation
Perform LMT MML Operation and HLR9820 routine
maintenance
Perform Security Management, Alarm Operations,
Message Tracing and Performance Operations
Perform Database backup and restoration
HLRV9 Equipment fault information collection and
processing
Procedures and methods of fault location and
troubleshooting: Use the system maintenance tools
Perform system management, cluster management,
disk management and Database management
Duration
4 working days
Class Size
Min 5,max 15.
11 SG
11.1 Huawei Certified Network Associate-Huawei SG Technologies and
Device Training Outline
HLR9820V900R006 IP Resource Planning and Redundancy Solution
0.5 d
Lecture
SingleSDB Redundancy System
Commissioning
0.5 d
Lecture, Hands-on exercise
SingleSDB Operation and Maintenance
3.5 d
Lecture, Hands-on exercise
SingleSDB Maintenance and
Troubleshooting
1d
Lecture, Hands-on exercise
COMMERCIAL IN CONFIDENCE 30
Training Mode
Target Audience
This training program is intended for those who are
to take Huawei Certified Network
Associate-Huawei SG Technologies and Device
certification exam and those who hope to learn
about basic SG7000 principles and Huawei
SG7000 equipment.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
After the completion of this program, participants
will be able to:
Describe the basic concepts, architecture, MTP
functions of SS7 Signaling System and signaling
network.
Describe the basic function of SCCP.
State the format of SCCP message and the meaning of
the message which are often used.
Describe the basic concept of SIGTRAN, the structure
and signaling procedures of M2PA/M3UA.
Describe SG7000 system structure and hardware
architecture, including the cabinet, frame, board and the
performance features of SG7000.
Describe SG7000 logical architecture and signaling
flow.
Configure the hardware data, narrowband link data and
broadband link data.
Implement the common operation of maintenance such
as message tracing, log management, alarm
management and link management.
Perform SG7000 client software installation.
Perform SCCP and M2PA data configuration of
SG7000.
Duration
5 workdays
Maximum Class Size
16 persons
11.2 Huawei Certified Network Professional-Huawei SG Technologies
and Device Training Outline
Training Mode
2 d Lecture, Hands-on exercise
Huawei SG Technologies and Device Training
5 d Lecture, Hands-on exercise
Huawei SG Technologies and Device Training
COMMERCIAL IN CONFIDENCE 31
Target Audience
This training program is intended for those who
have pass the Huawei Certified Network
Professional-Huawei SG Technologies and Device
certification exam and those who hope to learn
about in-depth SG7000 principles and Huawei
SG7000 equipment.
Prerequisites
Successfully pass the Huawei SG7000 Primary
certification exam
At least a half year of experience in the operation and
maintenance of SG7000
Objectives
After the completion of this program, participants
will be able to:
Describe the basic principle of MNP service.
Perform SG7000 MTP loadsharing data configuration.
Perform SG7000 SCCP loadsharing data configuration.
Describe the troubleshooting method of SG7000.
Perform information collection of SG7000 trouble.
Locate the hardware trouble, link trouble and SCCP
layer trouble.
Duration
2 workdays
Maximum Class Size
16 persons
12 GSM
12.1 Huawei Certified Network Associate-Huawei GSM Technologies
and Device Training Outline
Training Mode
COMMERCIAL IN CONFIDENCE 32
Target Audience
This training program is intended for those who are
to take the HCNA certification exam and those who
hope to learn about basic GSM principles and
Huawei GSM equipment.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
After the completion of this program, participants
will be able to:
Principles
1.Understandable of the basic principle of GSM and
GPRS technology
2.Familiar with GSM system architecture and the
wireless network interface
Product knowledge
1.Master BSC6900 (GSM) system overview, hardware
architecture and product specifications
2.Master BTS3900/DBS3900 (GSM) hardware
architecture and module functions
3.Master typical configuration of BTS3900/DBS3900
(GSM)
4.Master BTS3900/DBS3900 (MBTS) hardware
architecture and module functions
5.Master typical configuration of BTS3900/DBS3900
(MBTS)
Engineering survey and hardware installation
1.Master the engineering survey approaches of site
controller and site
2.Master the installation design approaches of site
controller and site
3.Master the hardware installation approaches of site
controller and site (including feeder system, monitoring,
and other peripherals)
Software Commissioning
1.Master the remote and local commissioning
approaches of the site
2.Master the site integration approaches
3.Master the site service testing approaches
4.Master the using methods of testing tool and know the
meaning of testing indicators
Acceptance testing
1.Master the hardware quality standard
2.Master the acceptance approaches of a single-site
(including service testing)
Maintenance and troubleshooting
1. Master the site operation& maintenance approaches
2.Capable of independently dealing with hardware
replacement and information collection of site
3.Capable of independently dealing with site problems
and emergency recovery on-site
Duration
11 working days
Maximum Class Size
20 persons
12.2 Huawei Certified Network Professional-Huawei GSM Technologies
and Device Training Outline
Training Mode
11 d Lecture, Hands-on exercise
GSM Huawei Certified Network
Associate-Huawei GSM Technologies
and Device
COMMERCIAL IN CONFIDENCE 33
Target Audience
This training program is intended for those who are
to take the HCNP certification exam and those who
hope to learn about basic GSM principles and
Huawei GSM equipment.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
Compare with “Huawei Certified Network
Associate-Huawei GSM Technologies and Device
Training”, the objectives added are shown as
follows. After the completion of this program,
participants will be able to:
Principles
1.Understandable of the signaling process of GSM
system
Product knowledge
1.Master CME configuration tool principles and
operational guidance
2.Understandable of M2000 system architecture and
master the operation of client
Software Commissioning
1.Capable of independently finishing data configuration
of site controller and site through WebLMT and CME
2.Master the software commissioning approaches of the
controller
3.Capable of independently finishing new site
integration through M2000
Acceptance testing
1.Master the acceptance approaches of controller
Software Upgrade
1.Master the local upgrade approaches of the site
2.Master the remote upgrade approaches of the site
Maintenance and troubleshooting
1.Master the controller operation& maintenance
approaches
2.Capable of independently dealing with hardware
replacement and information collection of controller
3.Capable of independently dealing with controller
problems and emergency recovery on-site
4. Capable of independently finishing network
inspection through NIC and OMSTAR tools
Duration
14 working days
Maximum Class Size
20 persons.
13 WCDMA
13.1 Huawei Certified Network Associate-Huawei WCDMA
Technologies and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNA certification exam and those who
hope to learn about basic WCDMA principles and
Huawei WCDMA equipment.
Prerequisites
Be familiar with the Windows operating system. 9 d Lecture, Hands-on
exercise
HCNA-WCDMA Huawei Certified
Network Associate-Huawei WCDMA
Technologies and Device
14 d Lecture, Hands-on exercise
Huawei Certified Network
Professional-Huawei GSM Technologies
and Device
COMMERCIAL IN CONFIDENCE 34
Know basic functions of the computer network.
Objectives
After the completion of this program, participants
will be able to:
Describe the basic principle of WCDMA technology
Describe WCDMA system architecture and the wireless
network interface
Describe BSC6900 (WCDMA) system , hardware
architecture and product specifications
Describe BTS3900/DBS3900 (WCDMA) hardware
architecture and module functions
Outline typical configuration of BTS3900/DBS3900
(WCDMA)
Describe BTS3900/DBS3900 (MBTS) hardware
architecture and module functions
Outline typical configuration of BTS3900/DBS3900
(MBTS)
Complete engineering survey of site controller
Complete engineering survey of site
Complete installation design of site controller
Complete installation design of site
Complete hardware installation of site controller
Complete hardware installation of site (including feeder
system, monitoring, and other peripherals)
Complete remote/local commissioning of the site
Complete site integration
Complete site service testing
Perform testing tool and testing indicators
Hardware installation check
Acceptance of a single-site (including service testing)
Hardware Replacement
Information collection
Deal with problems on site
On-site emergency recovery
Duration
9 working days
Maximum Class Size
20 persons
13.2 Huawei Certified Network Professional-Huawei WCDMA
Technologies and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNP certification exam and those who
hope to learn about basic WCDMA principles and
Huawei WCDMA equipment.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
After the completion of this program, participants
will be able to:
Describe WCDMA wireless network architecture
Describe the signaling process of the WCDMA system
Describe BTS3900/DBS3900 (MBTS) hardware
Describe BTS3900/DBS3900 (MBTS) architecture and
module functions
Outline typical configuration of BTS3900/DBS3900
(MBTS)
13 d Lecture, Hands-on exercise
HCNP-WCDMA Huawei Certified
Network Professional-Huawei WCDMA
Technologies and Device
COMMERCIAL IN CONFIDENCE 35
Outline CME configuration tool principles and platform
Outline CME configuration tool operation
Outline the M2000 system architecture and operation
Outline function of the M2000 system
Perform data configuration for site
Perform data configuration for site controller
Complete the process of site data configuration
Complete the process of site controller data
configuration
Perform software commissioning of the controller
Describe the process of software commissioning
Perform new site integration through M2000
Describe the process of new site integration
Describe the process of remote upgrade of the site
Describe the process of local upgrade of the site
Complete remote upgrade of the site
Complete local upgrade of the site
Complete hardware replacement
Complete Information collection for controller
Deal with problems on site for controller
Complete On-site emergency recovery for controller
Duration
13 working days
Maximum Class Size
20 persons.
14 CDMA
14.1 Huawei Certified Network Associate-Huawei CDMA Technologies
and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNA certification exam and those who
hope to learn about basic CDMA principles and
Huawei CDMA equipment.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
Principles (1 day)
1.cdma2000 1X & 1xEV-DO basic technology (CDMA
technology development road signpost、f cdma2000
1X/1xEV-DO technical characteristics and network
structure, key technology of cdma2000 1X and UM
channel Introduction、EVDO new technologies and UM
channel Introduction) ;
2.the technical characteristics and network architecture
of the the Trustar digital trunking communication
system ;
Product knowledge (4 days)
1.BSC6680/BSC6600 / RAC6610/MSE9830 controller
and bts products(hardware components, the basic
configuration rules and board function.);
2,.the meaning of the BSC6680/BSC6600 /
RAC6610/MSE9830 controller and bts products, the
meaning of it’s board indicator light;
3.BTS3900/BTS36xx series of CDMA base station
antenna and feeder cable introduction (basic knowledge
of radio waves, the basic principles of antenna radiation
of electromagnetic waves, introduced the concept of the
antenna transmission cable, the base station antenna
and feeder cable systems) ;
4.the introduction of complementary products (room
environment of the project site, the power system ,
alarm boxes, etc.) ;
5.the controller and bts products survey content and
survey Note;
6.the bts hardware distribution, delivery rules, methods,
7~7.5 d Lecture, Hands-on exercise
Huawei CDMA Technologies and Device
Training
COMMERCIAL IN CONFIDENCE 36
understanding Huawei BOQ and the meaning of the
packing list;
7.controller and base station hardware installation and
the Power On Self Test;
Data configuration and commissioning
Acceptance Test (1 day)
1.the BTS hardware installation quality inspection
content and standards;
2.Grasp the power meter, sitemaster ,test terminal use
method;
Chinese Edition adds the following:
1.the BSC hardware installation quality inspection
content and standards;
Maintenance and Troubleshooting (1day)
1.Grasp the replacement method and operation
procedure of BSC6680/BSC6600/RAC6610/MSE9830
board、frame etc.
2.Grasp the replacement method and operation
procedure of BTS36xx/39xx serial bts board、BBU etc.
Duration
7~7.5 working days (no practice)
Maximum Class Size
20 persons
COMMERCIAL IN CONFIDENCE 37
14.2 Huawei Certified Network Professional-Huawei CDMA
Technologies and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNP certification exam and those who
hope to learn about basic CDMA principles and
Huawei CDMA equipment.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
Principles (1.5 days +1 day)
1.cdma2000 1X & 1xEV-DO basic technology (CDMA
technology development road signpost、f cdma2000
1X/1xEV-DO technical characteristics and network
structure, key technology of cdma2000 1X and UM
channel Introduction、EVDO new technologies and UM
channel Introduction) ;
2.the technical characteristics and network architecture
of the the Trustar digital trunking communication
system ;
3.Grasp transmission fundamentals (TCPIP protocol
and subnetting, Ethernet / VLAN / VRRP / Routing
Fundamentals) ;
Product knowledge (4 days)
1.BSC6680/BSC6600 / RAC6610/MSE9830 controller
and bts products(hardware components, the basic
configuration rules and board function.);
2.the meaning of the BSC6680/BSC6600 /
RAC6610/MSE9830 controller and bts products, the
meaning of it’s board indicator light;
3.BTS3900/BTS36xx series of CDMA base station
antenna and feeder cable introduction (basic knowledge
of radio waves, the basic principles of antenna radiation
of electromagnetic waves, introduced the concept of the
antenna transmission cable, the base station antenna
and feeder cable systems) ;
4.the introduction of complementary products (room
environment of the project site, the power system ,
alarm boxes, etc.) ;
5.the controller and bts products survey content and
survey Note;
6.the bts hardware distribution, delivery rules, methods,
understanding Huawei BOQ and the meaning of the
packing list;
7.controller and base station hardware installation and
the Power On Self Test;
Data configuration and commissioning (2 days
+1 day)
1.the BTS data and software loading process and
methodology;
13.5~16 d Lecture, Hands-on exercise
Huawei CDMA Technologies and Device
COMMERCIAL IN CONFIDENCE 38
2.the BTS data configuration;
3.the BTS basic commissioning procedure;
4.the meaning of the BTS of the Engineering Indicators
(VSWR, RSSI、output power) and test methods,Finish
the BTS troubleshooting and quality inspection under
the guidance. ;
5.the BTS environment alarm configuration, debugging;
6.IP RAN network form and IPRAN BTS data
configuration;
Chinese Edition adds the following (2 days + 2
days)
1.BSC6680 controller internal signals (signaling, traffic)
processes procedure, the basic rules of the system
configuration;
2.Operation and maintenance system of BSC6680
(CDMA BSC6680 maintenance system agencies,
system networking, maintenance system software
structure, the internal IP network, IP address planning) ;
3.BSC6680 data configuration (the basic configuration
of BSC6680 system,, the file loading procedure, the
CDMA BSC6680 hardware, clock, interface, cell, carrier,
and cdma2000 1X/1xEV-DO business data
configuration) ;
4.BSC6680 signaling procedure(voice, data services,
short message, handoff signaling process) ;
5.the BSC data configuration under IP RAN network;
Acceptance Test (1 day+ 0.5 days)
1.the BTS hardware installation quality inspection
content and standards;
2.the BTS software installation quality inspection
content and standards;
3.the LMT maintenance method of RSSI,VSWR,
Transmit power tracing;
4.Single BTS acceptance range and standard;
5.Grasp the power meter, sitemaster ,test terminal use
method;
6.the acceptance range and standard of BTS basic
characteristics;
Chinese Edition adds the following: (1 day+0.5
days)
1.the BSC hardware installation quality inspection
content and standards;
2.the BSC software installation quality inspection
content and standards;
3, the LMT maintenance method of signal tracing;
4,Single BSC acceptance range and standard;
5, the acceptance range and standard of BSC basic
characteristics;
Maintenance and Troubleshooting (2 days + 0.5
day)
1.Grasp the replacement method of spare parts, clear
procedure key points;
2.Familiar with some of the commonly used test tools
(sitemaster, power meter, test phone, etc.)
3.Familiar with the daily operation &maintenance of the
36xx/39xx Series BTS and
RAC6610/BSC6600/BSC6680 ,basic information
collection methods, analysis and process the common
fault alarm base on online help;
4.Grasp MSE9830 board replacement methods,
procedure and information collection methods;
5.To understand the common fault scenarios of the
36xx/39xx Series bts, to grasp the emergency fault
information collection and recovery measures, quickly
recovery according the guidance;
6.the use method of FMA tools
Duration
13.5~16 working days (no practice)
Maximum Class Size
20 persons.
COMMERCIAL IN CONFIDENCE 39
15 Wimax
15.1 Huawei Certified Network Professional-Huawei Wimax
Technologies and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the Wimax certification exam and those
who hope to learn about basic Wimax principles
and Huawei Wimax equipment.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
After the completion of this program, participants
will be able to:
Describe OFDM/OFDMA Basics
Describe WiMAX Features
Describe WiMAX Applications
Describe WiMAX system networking
Outline each board function of DBS3900 WiMAX
Complete the inside connection of DBS3900
State the typical networking configuration
Describe WiMAX system networking
Outline DBS3900 WiMAX functions
Outline each board function of DBS3900 WiMAX
Complete the inside connection of DBS3900
State the typical networking configuration
Describe WiMAX Network Structure
Master the local operation and remote operation
Complete daily maintenance tasks
Complet the concept related to configuration
Management
Complet how to perform configuration Management
Finish basic data configuration for WiMAX DBS3900
Describe the two types of commissioning
Perform local commissioning
Perform remote commissioning
Describe How to install DBS3900 in site
Describe how to install Antena system
Finish bacis function Acceptance.
Can be done Deriver test
Complete daily maintenance tasks
Can be change board basicly
Duration
8 workdays
Maximum Class Size
16 persons
8 d Lecture, Hands-on exercise
Huawei Certified Network Professional-Huawei Wimax Technologies and Device
COMMERCIAL IN CONFIDENCE 40
16 GSM RNP&RNO
16.1 Huawei Certified Network Associate- Huawei GSM RNP&RNO
Technology Training Outline
Training Mode
Target Audience
This training program is intended for those who are to
take the HCNA GSM RNP&RNO certification exam.
Prerequisites
Skilled in windows operating system.
Capable of describing the basic functions of computer
network.
Skilled in using business softwares like office and
outlook.
Capable of describing the basic functions of mobile
communication.
Objectives
Principle:
Understandable of the GSM basic theories /wireless
transmission /telecomunicatios as well as attenna and
associated parameters.
Planning knowledges:
Familiar with radio transmission theoretics and the usual
transmission model.
Optimization knowledges:
Capable of independently writing the analysis of
electromagnetic interference, and providing preliminary
resolutions for the target area accordingly.
Capable of independently finishing site survey and
report upon request.
Capable of independently using related tools to survey
radio parameters and quality of antenna.
Capable of independently accomplishing DT/CQT test
(single site verification) by Genex Porbe, analyzing the
problems of DT/CQT by Genex Assistant and deliver
resolutions accordingly.
Capable of dealing with common customer’s complaint
by DT/CQT.
Familiar with the meaning and adjusting regulations of
commonly used Network Design parameters.
Duration
7 workdays
Maximum Class Size
16 persons
7 d Lecture,Hands-on
exercise
Huawei Certified Network
Associate-Huawei GSM RNP&RNO
Technologies Training
COMMERCIAL IN CONFIDENCE 41
16.2 Huawei Certified Network Professional - Huawei GSM RNP&RNO
Technology Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNP GSM RNP&RNO certification
exam.
Prerequisites
Skilled in windows operating system.
Skilled in using business softwares like office and
outlook .
Capable of describing the basic functions of mobile
communication.
Have qualifications for HCNA-Huawei GSM RNP&RNO
Technologies.
Objectives
Principle:
Familiar with GSM communication theory.
Master wireless network planning and optimazition
process.
Planning knowledges:
Master the GSM coverage planning, capacity planning,
neighbor/frequency design, location area design,
parameters design and GPRS planning.
Master the related parameters and adjusting regulations
of Network Design.
Master the way of CW testing and related data
processing.
Master the corrective procedure of transmission model.
Optimization knowledges:
Master the RF optimazition & procedure, methods and
tools, capable of processing GSM radio network RF
optimazition.
Master the definition of traffic statistics and counter point
in the wireless side of GSM Network.
Master GSM common KPI analysis and network
problem solution, such as drop call, handover, voice
quality and data traffic.
Capable of independently completing network
optimazition reports and generating problem analysis
reports.
Duration
8workdays
Maximum Class Size
16 persons
8 d Lecture,Hands-on
exercise
Huawei Certified Network Professional-Huawei
GSM RNP&RNO Technologies Training
COMMERCIAL IN CONFIDENCE 42
17 WCDMA RNP&RNO
17.1 Huawei Certified Network Associate-WCDMA RNP&RNO Training
Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the Huawei Certified Network
Associate-WCDMA RNP&RNO certification exam.
Prerequisites
Skilled in windows operating system.
Skilled in using business softwares like office and
outlook.
Capable of describing the basic functions of mobile
communication.
Objectives
Principle:
Understandable of the WCDMA basic theories, wireless
transmission, telecomunicatios, attenna and associated
parameters.
Planning knowledges:
Master antenna selection.
Initial grasp of network planning and optimization
process, familiar with the site survey, RF Tuning
process.
Familiar with the theory of radio propagation and
common propagation models.
Optimization knowledges:
Independent output electromagnetic interference
analysis, and existence of the interference region is
given a preliminary settlement proposals.
Be able to independently asked to complete the site
investigation and reporting.
Be able to use the tools to verify the wireless working
parameters and the quality of the antenna and cable
correction.
Be able to independently use the Genex Probe,
completion of DT / CQT testing (including single-station
verification), Genex Assistant analysis of the problem in
the DT / CQT, the output of the corresponding solutions.
Deal with general customer complaints by DT / CQT.
Grasp the road test KPI the meaning and the testing
method, independent production test program and
complete.
Master the cell parameters to verify the method, familiar
with the meaning of the parameters and adjust the basis
of the common network rules.
Duration
7 workdays
Maximum Class Size
16 persons
17.2 Huawei Certified Network Professional-WCDMA RNP&RNO
Training Outline
7 d Lecture,Hands-on
exercise
Huawei Certified Network
Associate-WCDMA RNP&RNO Training
COMMERCIAL IN CONFIDENCE 43
Training Mode
Target Audience
This training program is intended for those who are
to take the Huawei Certified Network
Professional-WCDMA RNP&RNO certification
exam.
Prerequisites
Skilled in windows operating system.
Skilled in using business softwares like office and
outlook.
Capable of describing the basic functions of mobile
communication.
Have qualifications for HCNA-Huawei WCDMA
RNP&RNO Technologies.
Objectives
Principle:
Familiar with the WCDMA communication theory.
Master the wireless network planning and optimization
process.
Planning knowledges:
Master the UMTS coverage planning, capacity planning,
and neighbor / frequency planning, LAC planning,
scrambling code planning.
Grasp the relevant parameters of the network planning
and adjustment of principles.
Grasp the CW test method, the CW test data
processing.
Master the propagation model calibration processes,
methods.
Optimization knowledges:
Master the RF optimization of processes, methods, tools,
with network RF optimization capabilities.
Master the definition of traffic statistics and counter point
in the wireless side of GSM Network.
To master the problems of the common words of
WCDMA system KPI analysis and network processing,
familiar, then the system KPIs (Access, retention and
mobility)optimization method.
Familiar with Huawei UMTS RNC maintenance
operations.
Able to independently finish the network optimization
reporting and problem analysis report writing.
Duration
11workdays
Maximum Class Size
16 persons
18 CDMA RNP&RNO
18.1 Huawei Certified Network Associate-Huawei CDMA RNP&RNO
Technologies Training Outline
11 d Lecture,Hands-on
exercise
Huawei Certified Network Professional-WCDMA
RNP&RNO Training
COMMERCIAL IN CONFIDENCE 44
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNA CDMA RNP&RNO certification
exam.
Prerequisites
Skilled in windows operating system.
Skilled in using business softwares like office and
outlook.
Capable of describing the basic functions of mobile
communication.
Objectives
Principle:
Understandable of the CDMA basic theories /wireless
transmission /telecomunicatios as well as attenna and
associated parameters.
Planning knowledges:
Familiar with radio transmission theoretics and
the usual transmission model.
Optimization knowledges:
Capable of independently writing the analysis of
electromagnetic interference, and providing preliminary
resolutions for the target area accordingly.
Capable of independently finishing site survey and
report upon request.
Capable of independently using related tools to survey
radio parameters and quality of antenna.
Capable of independently accomplishing DT/CQT
test(single site verification) by Pioneer, analyzing the
problems of DT/CQT by Navigator and deliver
resolutions accordingly
Capable of dealing with common customer’s complaint
by DT/CQT.
Familiar with the meaning and adjusting regulations of
commonly used Network Design parameters.
Duration
8 workdays
Maximum Class Size
16 persons
18.2 Huawei Certified Network Professional-Huawei CDMA RNP&RNO
Technologies Training Outline
8 d Lecture,Hands-on
exercise
Huawei Certified Network
Associate-Huawei CDMA RNP&RNO
TechnologiesTraining
COMMERCIAL IN CONFIDENCE 45
Training Mode
Target Audience
This training program is intended for those who are
to take the HCNP CDMA RNP&RNO certification
exam.
Prerequisites
Skilled in windows operating system.
Skilled in using business softwares like office and
outlook .
Capable of describing the basic functions of mobile
communication.
Have qualifications for HCNA-Huawei CDMA
RNP&RNO Technologies.
Objectives
Principle:
Familiar with CDMA communication theory.
Master wireless network planning and optimazition
process.
Planning knowledges:
Master the elements which impact on coverage and
capacity. Familiar with the basic principle of power
configuration.
Master the Network structure of multi-trxs , familiar with
the theories of PN, LAC and Neighbour design.
Master the way of CW testing and related data
processing.
Master the corrective procedure of transmission model.
Master the related parameters and adjusting regulations
of Network Design.
Optimization knowledges:
Master the RF optimazition & procedure, methods and
tools, capable of processing GSM radio network RF
optimazition.
Master the definition of traffic statistics and counter point
in the wireless side of CDMA Network.
Master CDMA common KPI analysis and network
problem solution, such as drop call, handover, voice
quality and data traffic .
Familiar with operating on HUA WEI CDMA BSC’s
flatform;
Capable of independently completing network
optimazition reports and generating problem analysis
reports.
Duration
8 workdays
Maximum Class Size
16 persons
8 d Lecture,Hands-on
exercise
Huawei Certified Network Professional-Huawei
CDMA RNP&RNO Technologies Training
COMMERCIAL IN CONFIDENCE 46
19 Microwave RNP
19.1 Huawei Certified Network Associate-Huawei Microwave RNP
Technologies Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the Microwave planning certification exam
and those who hope to learn basic microwave
transmission principles and LOS survey process,
and basic TCP/IP knowledge.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
Objectives
After the completion of this program, participants
will be able to:
Describe the wireless radio-technology theory and
understand electromagnetic wave propagate model in
free space.
Complete site LOS survey report independent.
Complete performance calculation for microwave links
independent.
Be familiar with popular parameters on microwave
planning, and performance adjustment methods
Be familiar with basic TCP/IP knowledge and Ethernet
principle.
Duration
3 Working days
Maximum Class Size
16 persons
TA08 3 d Lecture,Hands-on excercise
Huawei Certified Network Associate-Huawei
Microwave RNP Technologies Training
COMMERCIAL IN CONFIDENCE 47
19.2 Huawei Certified Network Professional-Huawei Microwave RNP
Technologies Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the Microwave planning advanced
certification exam,and those who hope to learn
about frequency planning, interference analysis
and Ethernet traffic design.
Prerequisites
Be familiar with the Windows operating system.
Know basic functions of the computer network.
With hardware installation and commissioning
experience of Microwave or optical
Knowledge about Microwave telecom common
principle.
Objectives
After the completion of this program, participants
will be able to:
With primary engineer requirements.
Be familiar with microwave telecom principle and TDM ,
Hybrid and IP radio working principle.
Complete primary planning for network topology and
capacity.
Be familiar with common frequency band and air
channel allocation regulation, could complete frequency
design and interference analysis for middle scale
network
Be familiar with microwave link design process and
optimize method.
Understand deeply common KPI of microwave design
and parameters selection regulations.
Complete general evaluation for microwave network
and afford related design suggestions.
Manage the microwave planning team.
Duration
3 Working days
Maximum Class Size
16 persons
TA08 3 d Lecture,Hands-on excercise
Huawei Certified Network Professional-Huawei
Microwave RNP Technologies Training
COMMERCIAL IN CONFIDENCE 48
20 Site and Power System
20.1 Huawei Certified Network Associate- -Huawei Site and Power
System Technology and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the Site and Power System certification
exam and those who hope to learn about basic
ITS1000M and Power3000 principles and Huawei
ITS1000M and Power3000 equipment.
Prerequisites
Having working experience in the operation and
maintenance of Power3000.
Be familiar with Battery group.
Objectives
After the completion of this program, participants
will be able to:
Describe the structure, functions and features of
ITS1000M and Power3000 Solution.
Explain the functions and specifications of different
parts.
Outline the load capacity and ability of ITS1000M and
Power3000 Solution.
Execute the Field operation, such as Battery
replacement.
Perform ITS1000M and Power3000 Solution operation
and maintenance, etc.
Locate and eliminate faults, get experience from
troubleshooting practice.
Remote update software
Duration
9 workdays
Maximum Class Size
12 persons
ODC01 9 d Lecture, Hands-on exercise
Huawei Certified Network Associate- -Huawei Site and Power System Technology and Device Training
COMMERCIAL IN CONFIDENCE 49
21 Hybrid Power Supply
21.1 Huawei Certified Network Associate- Huawei Hybrid Power Supply
Technology and Device Training Outline
Training Mode
Target Audience
This training program is intended for those who are
to take the Hybrid Power Supply certification exam
and those who hope to learn about basic
Power1000 and Power2000 principles and Huawei
Power1000 and Power2000 equipment.
Prerequisites
Having working experience in the operation and
maintenance of D.G.
Be familiar with Battery group.
Objectives
After the completion of this program, participants
will be able to:
Describe the structure, functions and features of
Power1000 and Power2000 Solution.
Explain the functions and specifications of different
parts.
Outline the load capacity and ability of Power1000 and
Power2000 Solution.
Execute the Field operation, such as Battery
replacement.
Perform Power1000 and Power2000 Solution operation
and maintenance, etc.
Locate and eliminate faults, get experience from
troubleshooting practice.
Remote update software
Duration
9 workdays
Maximum Class Size
12 persons
22 Hardware Installation Supervision (excluding RF products)
22.1 Huawei Certified Network Associate-Hardware Installation
Supervision (excluding RF products) Training Outline
Training Arrangement
Trainees
Personnel who attend the certification test of
hardware installation for Huawei telecom
equipment
Personnel who hope to know more about
hardware maintenance and troubleshooting of
Huawei equipment
Entrance Requirements
Huawei hardware installation personnel and Huawei
hardware installation sub-contractors
Dedicated personnel with basic electronic knowledge
and electrician skills
Objectives
Upon completion of this training program, the
trainees will understand the following subjects:
Introduction to EHS management during engineering
delivery
Telecom installation specifications
ODC00 9 d Lecture, Hands-on exercise
Huawei Certified Hybrid Power Supply — Huawei
Hybrid Power Supply Technology and Device
Training
Huawei certification of telecommunications
equipment hard mounted Coaching
Lectures,
drills
5 days
COMMERCIAL IN CONFIDENCE 50
Specifications on common tools and wireless products
installation
Required knowledge about installability
User guide for common tools of communication project
MA5600 hardware installation guide
SOP of OptiX OSN 3500
Guide to core network UMG8900 cabinet cascaded
optical fiber installation (2008.05.20)
Core network hardware installation training material
Specifications on installing and laying out cables
Cable connector production
Duration
Five routine working days
Maximum number of trainees
20
23 Hardware Installation Supervision (including RF products)
23.1 Huawei Certified Network Associate-Hardware Installation
Supervision (including RF products) Training Outline
Training Arrangement
Trainees
Personnel who attend the certification test of
hardware installation for Huawei telecom
equipment
Personnel who hope to know more about
hardware maintenance and troubleshooting of
Huawei equipment
Entrance Requirements
Huawei hardware installation personnel and Huawei
hardware installation sub-contractors
Dedicated personnel with basic electronic knowledge
and electrician skills
Contents
Upon completion of this training program, the
trainees will understand the following subjects:
Introduction to EHS management during engineering
delivery
Huawei certification of telecommunications
equipment hard mounted Coaching
Lectures,
drills
6 days
COMMERCIAL IN CONFIDENCE 51
Introduction to telecommunications room environment
Telecom installation specifications
Specifications on common tools and wireless products
installation
Required knowledge about installability
Introduction to common instruments and tools
BTS3900 hardware architecture and principle
DBS3900 hardware architecture and principle
Antenna and feeder system installation (Chinese video)
Quick installation guide to base station swap V1.0
Multimedia training material of tower installation
Specifications on installing and laying out cables
Training materials for making cable connectors
(outdoor)
Microwave product installation and commissioning
(training material for international projects)
Work instructions for the delivery of microwave co-base
stations (training material for international projects)
Duration
Six routine working days
Maximum number of trainees
20