htt-l1 hot tack tester - garellodegiosa.it · htt-l1 hot tack tester. ... hot tack tester is...
TRANSCRIPT
Purpose
The purpose is to simulate the forces on the seal while still hot on a flow wrap machine.
With the HTT the best sealing conditions can be determined.
• Temperature
• Pressure
• Seal Time
• Cooling Time
Structure
1. Load Cell; 2. Static Jaw; 3. Guide Rail; 4. Dyna mic Jaw; 5. Connect Pin; 6. Left Limit Adjust Knob; 7. Cylinder Cover; 8. LE D; 9. Keys; 10 Speed Button; 11. Temperature Controller; 12. Pressure Ga uge; 13. Pressure Knob; 14. Control Box; 15. Pulley Bracket Support
Structure
1. 15mm Line or 25mm Line 2. Static Jaw 3. Cooling Plate 4. Specimen Fixture5. Guiding Slot 6. Dynamic Jaw7. Specimen 8. Guiding Frame9. Hot Tack Clamp
Characteristics
Micro-computer control, LED display.
Optional measuring range of strength sensor. (30N 50N 100N 200N)
Characteristics
Electronic timing, several selective speeds.Automatic zero, intelligent malfunction alarming, o verload protection and stroke protection.
Operation process
Hot Tack Test:Specimen attachment → setting hot tack parameters → test begin (or step
on footswitch) → jaws clamp, heat sealing, unfold the specimen quickly, test → automatically finish
Peel Test, Strength Test:Specimen attachment → parameters setting → test begin → test process
→automatically finish