hse trainer profile - raheel ansar
TRANSCRIPT
We Care !Safety is way of doing
business
Range Of Training
• Fire Fighting Training • Risk Management • Incident and Accident Investigation • Health Safety & Environment Management System• Hazard Identification • Fire Evacuation Plan • Workplace Safety • Ergonomics & Driving Safety • Behavior Based Safety • Home Safety for Spouses and Families • Customized trainings on safety with respect to need of the industry
Trainer Profile
Main Qualification• NEBOSH IDIP• NEBOSH – IGC – Distinction • OHSAS 18001 – Certified Lead Auditor• ISO 14001 – Certified Lead Auditor • Attended and completed 2 day course on “Incident
investigation” by Det Norske Veritas• Mechanical Engineer - NUST
Expertise• HSE Training• HSE Audit of any facility• OHSAS 18001 & ISO 14001 system design Function
Analysis• Incident Investigation & root cause Analysis• HSE Management system• Project Management
Raheel Ansar
Work Experience• EHS Manager – GSK
(GlaxoSmithKline)• HSE Specialist CCI (Coca
Cola Icecek)• Senior Engineer HSE
PSO (Pakistan State Oil)
Microsoft Office Word 97 - 2003 Document
Raheel Ansar - CV
Training on LPG safety (Example)
DATA PLATE
Cylinder Data Plate
1. The Capacity of cylinders in liters 2. Design Pressure3. Year Made4. Manufacturer and serial Number5. Tare Weight
HSE Referee
گا چلے ں! نہی
How to handle LPG Cylinder?
How to handle LPG Cylinder?
• Inspect cylinder valves grease, oil, dirt, and solvent.
• Cylinder should be placed so that valve handle at the top is easily accessible
• Only use wrenches or tools recommended by supplier. • Do not drop cylinders or strike them against each other
or against other surfaces violently.
Handling
Filling of LPG Cylinder
• Cylinder should be checked before filling to ensure that they are fit to fill.
• Physical condition• Leak test• Checking weight
11.8 Kg for Domestic45 Kg for Commercial
Requalification of Cylinders
• Internal Inspection – every 10 years• External inspection- every 5 years• Hydraulic test- every 20 year or whenever valve
is removed• Valve inspection and maintenance• Markings- proper symbol of testing station, new
and old tare weight
Storage of Cylinders
• No vegetation and combustible materials for minimum distance of 15 ft (4.6 m).
• Not place cylinders on the ground where water can accumulate.
• Gas cylinders must be secured• Store cylinders in an upright position
Storage of Cylinders
• Storage areas shall be covered with canopies. (Non combustible Material)
• Gas cylinders may not be stored in public hallways or other unprotected areas.
• Temperatures of the storage area must not exceed 125° F/51.66° C.
گا چلے ! نہیں
Storage
Storage
Transportation of LPG Cylinder
• Never drag, slide or roll a cylinder; use a cylinder cart or trolley.
• Cylinders must be transported upright (with the valve up
• Always have the protective cap covering the valve when transporting the cylinder.
• Do not drop cylinders
• Do not use the valve cover to lift cylinders.
Caution: If the cylinder is dropped on a hard surface, it can cause an explosion.
Transportation of LPG Cylinder
Transportation
VIDEO
Video discussion
• Employee killed when cylinder turned into a rocket because its valve was knocked off
• Employee suffocated after entering a space filled with gases
• Facility damaged when cylinder heated up and exploded
• Cold burns
Emergency Preparedness
Liability
References
• OSHA REGULATION: 29 CFR 1910.101 COMPRESSED GASES
• NFPA-55: Standard for the storage use, and Handling of Compressed and Liquefied Gases in Portable Cylinders.