hp photosmart 6520 install instructions
TRANSCRIPT
1
HP PhotoSmart 6520 e-All-in-One Installation Instructions
1. Insert the product CD into the CD/DVD drive of the computer (may need to RMC on the DVD drive and click open, then click on the Setup.exe if the auto play does not run)
2. Click on No thanks, I prefer the basic CD installation
2
3. This screen will appear for awhile.
4. Click on Customize Software Selections.
3
5. Uncheck all the Software Selections, click Next.
6. Check the “I accept agreement”, click Next.
4
7. This will show the installation process.
8. Select the USB option (wireless is not supported), click Next.
5
9. Click Yes – that we are sure we want to use a USB cable.
10. Connect the USB cable
6
11. This screen will appear while it is establishing the connection
12. Click Next
7
13. At this time you can print a test photo – click Next to print or Skip not to print test page
14. Auto off default is 2 hrs – can change to desired time (note: change on the printer itself at a later date.)
8
15. Click next
16. This screen will appear – can close out
9
17. The option for web-connection printer will appear – PTC will not support this –can close out