howto – JunOS Olive 12.1R1.9 for VMware

1) Create a new VM:

Specify the VD, the one in the hand Olive12.1R1.9.vmdk

Here are some configuration to a form!!!!!!!!!)))))))))))))))))

2)Download (http: //shvechkov.tripod.com/nptp.html ) and set Named Pipe TCP Proxy Run and prescribe our named pipes “\\.\pipe\my_olive12” on any free port.

3)Open the folder where your VM is located, and edit the file JunOS Olive 12.1R1.9

Change the line scsi0.present = "TRUE" to scsi0.present = "FALSE" Check ethernet0(1,2,n).virtualDev = "e1000" – save!!

Run our VM!!Axle load on my old Toshiba for 15-20 seconds. When you connect to the address127.0.0.1 to port 1007 (one that indicated in the configuration) You can actually watch loading, well it work in the console)))!

Login User:root Pass: Good luck!!!