How to Set Up Wireless IP Camera for Home Security

Home security is a huge issue for a lot of people, especially those who live in somewhat rough

areas or places where there is a high level of crime. As a result, it is important to take a look at

the options that are available to you. A home security system in the form of IP cameras can end

up giving you a better sense of security and control when it comes to your own property.

Effective surveillance systems will be there to monitor your property and allow you to collect

evidence should anything occur. As a result, you need to know how to set up wireless IP CCTV

cameras. With this in mind, you will know that your home is protected through the use of CCTV.

Get the Right Equipment

A lot of the time, you will only need to have broadband Internet as well as a computer, either a

desktop or a laptop. In some cases, it may be possible to

get a monitor from the company that you get the

security system with. Of course, this depends on what

package you have so make sure that you take a look at

the different possibilities before you decide to settle on

something.

Check Angles and Determine the Number of

Cameras

A complete surveillance system using wireless IP

cameras

Before you actually install the cameras, it is a good idea

to take a look at your property and see what will be necessary. If you live in a large house then

you will probably need to have a lot of cameras around the place in order to cover the entire

ground. The bigger your home is, the more cameras you will have to invest in. If you plan on

investing like this, always make sure to look for good quality cameras. These will be designed to

last for a long time and will ensure that no intruder in your home goes unseen. When you decide

how many cameras your home will need, it is also a good idea to check out the angles. Do all this

before you decide to get all the equipment? This will allow you to get a full picture of the

grounds surrounding your home.

Hardware Installation

When it comes to the installation of hardware, you will need various tools. These include a

hammer, a power drill, bolts, screws and mounting brackets. This will of course depend on the

kind of cameras that you end up buying. You can, of course, get someone else to install the

hardware. The DIY aspect of installing a security system is usually quite simple so it is not

something that you will have to worry about. Just make sure that the cameras are installed and

wired securely.

Some of the security systems come with their own data storage space for recording the feed from

the cameras. Depending upon how serious your requirements, it may be necessary to opt for a

recorder as well as an archive and a backup system.

Load the Software

The last thing that you need to do is load the software that came with the package. These steps

will usually depend on what sort of system you have chosen. A good quality system will load

quite easily and provide you with a number of options when it comes to camera angle and

recording options. Remember that you have to assign IP address for each camera and tie that to

the central system. This is exactly the way you will set up a local area network.

Make sure to choose the settings that you need.