how to replace a rear wheel - autodoc€¦ · peugeot 407 7–7 autodoc — top quality and...

7
How to replace a rear wheel hub on Peugeot 407 www.autodoc.co.uk 1–7 Carry out replacement in the following order: 1 Tighten the parking brake lever. 2 Place wedge blocks under the front wheels. 3 Loosen the wheel mounting bolts. 4 Raise the rear of the car and secure on supports. 5 Remove the rear wheels. Be sure to replace all self-locking nuts and bolts during installation.

Upload: others

Post on 11-May-2020

18 views

Category:

Documents


0 download

TRANSCRIPT

How to replace a rear wheelhub on Peugeot 407

www.autodoc.co.uk 1–7

Carry out replacement in the following order:

1

Tighten the parking brake lever.

2

Place wedge blocks under the front wheels.

3

Loosen the wheel mounting bolts.

4

Raise the rear of the car and secure on supports.

5

Remove the rear wheels.

Be sure to replace all self-locking nuts and bolts duringinstallation.

How to replace a rear wheel hub onPeugeot 407

www.autodoc.co.uk 2–7

6

Unscrew the brake caliper fastening

7

Remove the brake caliper.

8

Remove the brake pads.

9.1

Unscrew the caliper bracket fastening

9.2

Autodoc recommends:

Do not press the brake pedal after removing the brake pads.This will lead to the piston drop out of the brake cylinder,brake fluid leakage and the system depressurization.

How to replace a rear wheel hub onPeugeot 407

www.autodoc.co.uk 3–7

10

Remove the caliper bracket

11

Unscrew the brake disc fastening

12

Remove the brake disc.

13

Remove the hub bearing protection cap.

14

Loosen and remove the hub nut.

Autodoc recommends:

Remember that the brake disc can not be separated from thewheel hub with the use of force. To avoid damage to thedisc, use a special tool to remove the rust.

How to replace a rear wheel hub onPeugeot 407

www.autodoc.co.uk 4–7

15

Remove the wheel hub from the steeringknuckle.

16

Install the wheel hub

17

Tighten the hub.

Autodoc recommends:

If the part connections are very dirty, clean them with a metalbrush and treat with penetrant liquid.

How to replace a rear wheel hub onPeugeot 407

www.autodoc.co.uk 5–7

18

Install the hub bearing protection cap.

19

Install the brake disc.

20

Tighten the brake disc fastening

21

Install the brake caliper bracket

22

Tighten the brake caliper bracket

23

Install the brake pads.

How to replace a rear wheel hub onPeugeot 407

www.autodoc.co.uk 6–7

24

Install the caliper, screw the new guide pin boltand tighten it.

25

Install the wheel.

26

Lower the car and working in a cross order,tighten the wheel bolts.

We hope that this informationhave been useful for you!

Video tutorialsWatch our detailed video guides about your Peugeot 407repair on our youtube channel. Watch video guides.

AutoDoc onlineHighest quality wheel hubs for your car Peugeot 407 areavailable on AutoDoc. Go to the website.

How to replace a rear wheel hub onPeugeot 407

www.autodoc.co.uk 7–7

AUTODOC — TOP QUALITY AND AFFORDABLE CAR PARTS ONLINE

QUALITY AUTO PARTS PEUGEOT

WHEEL HUBS PEUGEOT 407

WHEEL HUBS FOR PEUGEOT WHEEL HUBS FOR PEUGEOT 407

AUTODOC IN SOCIAL MEDIA

Disclaimer:The document contains only general recommendations that may be useful for you when you perform repair or replacement works. AutoDocshall not be liable for any loss, injury, damage of property, acquired in the repair or replacement process due to incorrect usage ormisinterpretation of the provided information.

AutoDoc shall not be liable for any possible mistakes and uncertainties in this guide. The information provided is for informative purposes onlyand cannot replace advice from specialists.

AutoDoc shall not be liable for incorrect or hazardous usage of equipment, tools and car parts. AutoDoc strongly recommends to be carefuland observe the safety rules when performing repair or replacement works. Remember: usage of low quality auto parts does not guaranteeyou the appropriate level of road safety.