how to read this comparo - mobility management/media/037ab6b190eb4f90b6881e3db84b7958.pdfhow to read...
TRANSCRIPT
1 mobilitymgmt.comnovember 2015 | mobilitymanagement
How to Read This Comparo2015 Wheelchair Backs Comparo
Mobility Management invited manufacturers and distributors of aftermarket wheelchair backrests to submit photos and infor-mation about their products.
Information in this comparo was self selected and reported by the manufacturers. • If information does not apply or is not available, N/A is noted.• HCPCScodes were accurate at press time.• Weights of wheelchair backs and the backs’ weightcapacities (i.e., the
maximum weight of the patient using the back) are given in pounds (lbs.). • Backheights and widths are given in inches. In some cases, the heights
or widths are followed by another measurement, which refers to the size of the back for which the height or width is given.
• The first of the heightmeasurements refers to the height of the back at its highestpoint. The second height measurement shows the rangeofheights currently available in that model of back.
• The first of the widthmeasurements refers to the width of the back at its widestpoint. The second width measurement shows the rangeofwidths currently available in that model of back.
• Backangle/recline measurements are stated in degrees.• Construction refers to the materials used to create the wheelchair back,
including shell and cushion.• Coverconstruction refers to the materials used to create the back’s
cover, as well as the cover’s properties.• Accessoriesavailable refers to positioning accessories that the back can
accommodate. Accessories listed may be included with the back or avail-able at a separate cost.
• Hardware refers to the type and the properties of the hardware that attach the wheelchair back to the wheelchair.
• Adjustability refers to the different height, width, depth and angle adjustments or changes that can be accommodated by the back and its hardware.
• Intendedapplications refers to the targeted demographic or end user who could benefit from this seat back. Manufacturers were asked to supply brief examples, and other applications beyond those listed may be possible.This Wheelchair Backs Comparo is intended to be a starting point and
reference for seating & mobility suppliers and clinicians as they consider different back possibilities.
Submissions were edited for style and to fit in the space allotted. For more complete wheelchair back information and additional specifications and details, please consult the manufacturers directly using the Sources
Guide. l
CLIPA
REA |
Custo
m me
dia/sh
utter
stock
.com
2 mobilitymgmt.comnovember 2015 | mobilitymanagement
Back Wt./ Wt. CapacityHCPCS Code Back Ht./
Hts. OfferedBack Width/Wds. Offered
Back Angle/Recline Contoured? Back
ConstructionCover
Construction Accessories Hardware Adjustable? Intended Applications
2015 Wheelchair Backs Com
paroManufacturer/Model
Yes (height and width)
Masonite board can be removed to accommodate reduced lordotic
curved backs
Fully adjustable in all positions to
accommodate most patients
Easily adjusted for growth (4" depth),
angle (40°) and rotation. Adjustable mounting pins allow fit to chairs same or 1" wider than back
Yes, with clamps
20° back angle, 2" seat depth, + or -1"
back width
N/A
E2611, E2612
E2611, E2612
E2615
N/A
E2615, E2620
7 lbs./400 lbs.
N/A; N/A
N/A; 350 lbs.
1.9 lbs. & up; 150 lbs.
N/A; N/A
4.6-7.8 lbs. depending on size;
300 lbs.
Adjustable/ 11-16" and 17-21", adjustable
17-19"/17", 19"
16"/16"
10.5" (10" back)/7", 10",
12", 14"
N/A/10", 12", 14", 16", 18", 20"
12-22"/12", 14", 15", 18", 19", 22"
16", 18", 20", 23"/16", 18", 20", 23"
16-22"/16", 18", 20", 22"
16-20" & 22-26"/16-20" &
22-26"
10" (10" back)/10-14"
14", 16", 18", 20"/14", 16",
18", 20"
18" (18" back)/14", 15",
16", 17" 18", 19", 20"
90°
None
Fully adjustable in all positions
40° (-20 to 20°)
Up to 35° (for 4" contoured back)
and up to 20° (for 2" contoured
back) angle adjustability
20°
No, but back is adjustable
Has lumbar support
Can accommodate
kyphosis, rotation, scoliosis
3" contour depth
2" contour (10-14" heights) and 4" contour (16-20"
heights)
3" regular or 6" deep
Cube Akton polymer overlay
Memory foam & Masonite board to prevent sling-back
hammocking
1" thick high-density foam
pad for pressure redistribution and
comfort
Lightweight, durable aluminum back shell designed for easy attachment
of optional lateral supports and
headrest
Fully adjustable aluminum shell back
with padding for wheelchairs
3 heights & 2 depths available in each
size. Insert material is .75" polyurethane over .25" closed-cell
foams; aluminum shell
Stretchable polyester, breathable fabric
Breathable, fluid-resistant cover
Breathable, fluid-resistant cover
Kid*ab*ra, Pink Lollipop and Blizzard
Blue covers are water resistant and
breathable
Double-density padded cover made
of long-lasting, soft, flexible Verge
material
Breathable polyester spacer fabric
laminated to vapor permeable urethane
None
None
Standard carry pocket on back
Standard adjustable lumbar-sacral support pad; optional swing-away pediatric lateral
supports
N/A
Flexa-just stays (1 pair standard), pelvic wedges
(1 pair standard), fixed & swing-away lateral
trunk supports w/flat or curved pads, privacy flap, headrest mounting plate
Tension-adjusted back with hook-
and-loop strapping system, padded
cane posts that fold with chair
Secure to sling with buckle strap
N/A
Mini Set, quick-release hardware installs/adjusts
in minutes. Small attachment point for minimal interference
on back canes
Brackets have lateral adjustments
to accommodate various cane widths,
scoliosis, kyphosis
Quick-release mount with
dynamic movement
Actio
n Pro
ducts
Drive
Med
ical
Drive
Med
ical
Invac
are/M
otion
Conc
epts
New
Solut
ions
Ride D
esign
s
Twister
Cushion with Lumbar Support
Tension Adjustable
Matrx Mini Back
Genisys Aluminum Shell
Java
Ideal for active users; users with normal to severe kypho-scoliotic
vertebral misalignment
General-use back with lumbar support helps wheelchair users
maintain trunk stability by preventing hammocking
General-use back for mild positioning needs
Pediatric power or manual wheelchair users
Manual or power chair users
For those needing support & adjustability, Java's biomechanical
design provides flexibility to simply & accurately fit the trunk and pelvis for superior support,
comfort and mobility
2015 Wheelchair Backs Comparo
3 mobilitymgmt.comnovember 2015 | mobilitymanagement
Back Wt./ Wt. CapacityHCPCS Code Back Ht./
Hts. OfferedBack Width/Wds. Offered
Back Angle/Recline Contoured? Back
ConstructionCover
Construction Accessories Hardware Adjustable? Intended Applications
2015
Whe
elch
air B
acks
Com
paro
Manufacturer/Model
1" width; 1" forward/backward depth adjustment; 15°
anterior/posterior tilt; back is flippable for two fitment options
1" width; 1" forward/backward depth adjustment; 15°
anterior/posterior tilt; back is flippable for two fitment options
1" width; 1" forward/backward depth adjustment; 15°
anterior/posterior tilt; back is flippable for two fitment options
1.25" depth adjustment, 1" +/- width adjustment,
20° angle adjustment with applicable
hardware
1.25" depth adjustment, 1" +/- width adjustment,
20° angle adjustment with applicable
hardware
2- & 4-point hardware is angle,
width & height adjustable; Lite
Mount is width & height adjustable
E2615, E2620
E2615, E2620
E2611, E2613, E2615, E2620
E2613, E2615
K0108
E2613, E2614, E2615, E2620
4.75-7 lbs.; 300 lbs.
3.25-6.75 lbs; 300 lbs.
3.25-6 lbs; 300 lbs.
2.18-5.45 lbs. (based on backs to fit 16" chair);
250 lbs.
1.89-3.575 lbs. (based on backs to fit 16" chair);
250 lbs.
Starting at 2.3 lbs with Lite Mount
hardware; 300 lbs. (12-20" widths) & 500 lbs. (22-26"
widths)
18" shell measures 21"
with foam/16", 18", 20"
16" shell measures 19"
with foam/10", 13", 16", 18", 20"
16" shell measures 19"
with foam/10", 13", 16", 18"
12.75", 15.75", 18.75", 20.75",
22.75"/10", 13", 16", 18", 20"
(height based off of support
surface)
12.75", 15.75", 18.75"/10", 13",
16" (height based off of
support surface)
6.5-24"/lower- (6.5-9.5"),
mid- (12-15"), upper-thoracic
(16.5-19.5"), and shoulder height
(21-24")
15" (18" back)/14", 16",
18", 20"
15" (18" back)/14", 16",
18", 20"
15" (18" back)/14", 16",
18", 20"
16" wide back is 14.75" at widest
point/10-20"
16" wide back is 14.75" at widest
point/12-19"
N/A/12-26" in 2" increments
15° anterior & posterior tilt
15° anterior & posterior tilt
15° anterior & posterior tilt
10° fore, 10° aft with applicable
hardware options
10° fore, 10° aft with applicable
hardware options
+20° to -20°
7" of depth
4" of depth
2.5-3" of depth depending on
model
2.5", 4", 6"; custom contours
also available
2.5" & 4.5"; custom contours
also available
Posterior, posterior & lateral, posterior deep, posterior & deep lateral; and posterior & deep
contour styles available
Aluminum shell, Zytel bracket,
aluminum pins; foam pad w/front
layer of high resilient polyurethane foam
Aluminum shell, Zytel bracket and
pins; foam pad w/front layer
of high resilient polyurethane foam
Aluminum shell, Zytel bracket and
pins; foam pad w/front layer
of high resilient polyurethane foam
Lightweight aircraft aluminum shell, 1"
open-cell foam with attached .25" EVA backing; custom foam/air insert
options available
High-quality carbon fiber shell, 1"
open-cell foam with attached .25" EVA backing; custom foam/air insert
options available
Lightweight aluminum shell, 1.5" extra-soft
foam, closed-cell foam for Spine
Align positioning components
Front is polyester, back
is polyurethane-coated nylon with
polyurethane-coated polyester; breathable
& durable
Front is polyester, back
is polyurethane-coated nylon with
polyurethane-coated polyester; breathable
& durable
Front is polyester, back
is polyurethane-coated nylon with
polyurethane-coated polyester; breathable
& durable
Breathable AirMesh cover for moisture
resistance
Breathable AirMesh cover for moisture
resistance
Microclimatic outer cover with 3DX
Spacer Fabric & Lycra outer layer; optional moisture-resistant
inner cover
Lumbar supports, Therafin headrest, universal headrest adapter plate, large
cane clamps, privacy shield
Lateral supports, lumbar supports, Therafin headrest, universal headrest adapter plate, large
cane clamps, privacy shield
Lateral supports, lumbar supports, Therafin headrest, universal headrest adapter plate, large
cane clamps, privacy shield
Optional lateral supports, foam PSIS positioning blocks, loop handle,
removable privacy flap, standard integrated hole
pattern for universal headrest mounting
Optional lateral supports, foam PSIS positioning
blocks, loop handle, removable privacy flap
Standard Spine Align positioning, vanity
flap (standard on 24" & 26" backs), optional Whitmyer headrests,
CradleU lateral, anterior trunk supports
Quick-release or fixed (fixed on 16" high Max Contour only). Zytel hardware w/aluminum sliding height adjustment
bar
Quick-release or fixed (fixed available on 10", 13", 16"
AGILITY Mid Contour)
Quick-release or fixed (fixed
available on 10", 13", 16" AGILITY
Minimum Contour)
Multiple options include 2-point
PRO, quick release, 4-point PRO, width-
adjustable ELITE, basic release
Multiple options include Fixed ELITE, 2-point PRO, quick-
release, 4-point PRO, width-adjustable
ELITE
2-point & 4-point quick release and Lite Mount fixed
ROHO
ROHO
ROHO
Stealt
h Pro
ducts
Stealt
h Pro
ducts
Sunr
ise M
edica
l
AGILITY Max Contour
AGILITY Mid Contour
AGILITY Minimum Contour
ADI AL Series
ADI CF Series
JAY J3
For users who require significant postural support, are more dependent with transfers,
need maximum trunk support and control, want to minimize
wheelchair weight
For users who need postural support, are independent
or somewhat dependent on assistance with transfers, need minimal trunk support, need
adjustability to enhance range of motion and mobility
For users who require postural support, perform independent
transfers, have good trunk control, need adjustability to enhance range of motion and mobility
For the user demanding highest-quality aluminum back support
with a wide range of height, width, contour and hardware
options
For the user demanding highest-quality back support with the
greatest combination of weight reduction, clean aesthetics and
functionality
Accommodates users with a wide range of posterior pelvic stability
needs, lateral stability needs, back angle requirements & accessory
capabilities
2015 Wheelchair Backs Comparo
4 mobilitymgmt.comnovember 2015 | mobilitymanagement
Back Wt./ Wt. CapacityHCPCS Code Back Ht./
Hts. OfferedBack Width/Wds. Offered
Back Angle/Recline Contoured? Back
ConstructionCover
Construction Accessories Hardware Adjustable? Intended Applications
2015 Wheelchair Backs Com
paroManufacturer/Model
Tension adjustable
VariLock hardware accommodates
height, width, depth & angle adjustments with one tool while
client is seated
E2611, E2612
E2620
3 lbs./350 lbs.
6.4 lbs. (18"); 300 lbs.
16" and 12"/16" and 12"
21.75" (18" back)/17-23.6"
14-24"/14-24"
17.4" (18" back)/14", 15",
16", 17", 18", 20"
N/A
+/- 20°
No
Air-foam cushion is contoured to
shape of the shell
Stimulite honeycomb
Powder-coated aluminum with
integrated ergonomic handle; air/foam cushion with two-way air
release valve
Nylon outer cover & breathable power
mesh cover
Cover rolls over the top and fastens on inner shell.
User-facing material is breathable spacer
knit fabric
Supracor lumbar support available with
use of back
Deep lateral support shell includes supplemental
lateral supports and PSIS block of closed
cell foam
N/A
Quick-release VariLock hardware
uses 2 points of attachment & can be permanently
attached w/1 screw
Supr
acor
VARIL
ITE
Tension-Adjustable
ICON Deep Back
Active users who need more support than foam and/or have issues with heat and moisture
Deep contour provides extra lateral support for maximum support for
users with poor trunk control; ideal for those using secondary supports
or a tilt and recline system
2015 Wheelchair Backs Comparo
Action Products954 Sweeney DriveHagerstown, MD 21740(800) 228-7763actionproducts.com
Drive Medical99 Seaview Blvd.Port Washington, NY 11050(877) 224-0946drivemedical.com
Invacare Corp./Motion ConceptsOne Invacare WayElyria, OH 44035-4190(800) 333-6900invacare.com
New Solutions4321 Alamo St.Riverside, CA 92501(800) 429-9600newsolutions1.com
Ride Designs8100 SouthPark Way, C400Littleton, CO 80120(866) 781-1633ridedesigns.com
ROHO, A Permobil Company100 N. Florida Ave.Belleville, IL 62221(800) 851-3449roho.com
Stealth Products LLC104 John Kelly DriveBurnet, TX 78611(512) 715-9995stealthproducts.com
Sunrise Medical2842 Business Park Ave.Fresno, CA 93727(800) 333-4000sunrisemedical.com
Supracor2050 Corporate CourtSan Jose, CA 95131(800) 787-7226supracor.com
VARILITE4000 1st Ave. SWSeattle, WA 98134(800) 827-4548varilite.com
sources guide