how to program a halo2 atm machine

© PRINETA, LLC All Rights Reserved.

[email protected]://prineta.com/atms/

How to GuideProgramming a Halo 2 ATM

https://prineta.com/atms/


Hyosung Halo II

Press Enter, Clear, Cancel 1,2,3 In that order to see next screen

To Start the Programming Process


Press the Operator Function/ButtonNext


Enter the Default Master Code: 555555Next


Push the #4 on the key pad to start programming processMain Screen


Push the “Yes” button for ‘Quick Configuration’ Next

YES


Select TCP/IP for Internet if availableSet Network Type


Match the below with SSL/TLS V3.0Change Communication Settings


Get this from your ATM vendor/processor Enter Host Address URL and Port

If you do not have an ATM company you are working with for processing, please contact us via the contact form at https://prineta.com/atms/ and we can set up an account for you to start processing with your ATM.


Get this from your ATM vendorEnter Terminal ID

If you do not have Terminal ID contact us via the contact form at https://prineta.com/atms/ and we can set up an account for you to start processing with your ATM.


Don’t leave it as the default passwordChange the Password

Be sure to write it down somewhere safe that you will remember


After confirming the configuration, next is customer set upBack to the Main Screen


After confirming the configuration, next is customer set upHit Optional Function 1


Then press cancel two times to return to the main screenEnter Balance at Start


Then press cancel two times to return to the main screenNow go to System Setup


Change Password


Each password allows different level of access: the operator password allows you only to add money to the machine, and service password allows a technician to troubleshoot problems and obviously the master allows full access . We have already changed the master. Please write these down. Once changed cancel two times to get back to the main operation screen.

Change Password Screen

2

1

Change the Service and Operator Passwords. We will provide you the default password in your welcome e-mail.


Next Hit Host Setup


Enable with a send interval of 12 Click Health Check Message

Then call us so we can walk you through the final steps of programming. See it wasn’t as bad as you thought.


Visit us online at Prineta.com/ATMs

how to program a halo2 atm machine

Business