MOULD NO.: PBX - 12 - 303DIMENSION: 118mm (W) x 64mm (D) x 99.5mm (H)

DIECUT

CREASING

PERFORATED

PERFORATED DEPTH

2 POINT

NIL

NIL

MOULD NO.: PBX - 12 - 303DIMENSION: 118mm (W) x 64mm (D) x 99.5mm (H)

DIECUT

CREASING

PERFORATED

PERFORATED DEPTH

2 POINT

NIL

NIL

www.excard.com.myR

Tutorial

1

How to Prepare Packaging Artwork

MOULD NO.: PBX - 12 - 303DIMENSION: 118mm (W) x 64mm (D) x 99.5mm (H)

DIECUT

CREASING

PERFORATED

PERFORATED DEPTH

2 POINT

NIL

NIL

MOULD NO.: PBX - 12 - 303DIMENSION: 118mm (W) x 64mm (D) x 99.5mm (H)

DIECUT

CREASING

PERFORATED

PERFORATED DEPTH

2 POINT

NIL

NIL

2m

m

2mm

2mm

2mm

2mm

2mm

2mm

2mm

2mm

2mm

Download Die-line Template will be bigger than the open-size youselected. You must prepare the artwork size show as example below when you submit your order. For order submission, yourartwork must be prepared in the size as shown in the example below.

Page Size:Open-size for Die-line = 376mm X 268.5mmTotal open-size after bleeding = 380mm X 272.5mm (Artwork size for Contract Proof submission)

380mm (376mm + (2mm(left edge) + 2mm(right edge))

272.5mm(268.5mm + 2mm (top edge) + 2mm (bottom edge))

Die-line Template

www.excard.com.myR

2

Tutorial How to Prepare Packaging Artwork

File Preparation:

1. Artwork Size

– Add 2.0mm for Bleeding on all sides.– For Back Panel, Bleed out 3.0mm onto the Glue Flap.

2. Page Size

– How to calculate page size: If open size for die-line is H:268.5mm x W: 376mm; then total open size for page is H: 272.5mm x W: 380mm. There be an additional 4.0mm for the page size due to the adding of the 2.0mm Bleeding on all sides.

3. Die-line Indicator

– The Die-line Indicator MUST be included on the Full Artwork Page (Page 1) and Die-line Artwork Page (Last Page). – The size of the Die-line Indicator in the die-line downloaded may be big. – Therefore, simply reduce the size to make it fit into the available space on the artwork page.

4. Optional Finishing (Spot UV, Hot Stamping, Embossing)

– The artwork page arrangement is according to the Optional Finishing.

5. After preparing all the necessary files, you are required to Zip all the PDF files together (in zip format) or combine all files and save into 1 PDF file, only then upload your artwork when placing order.

Please refer page 1

www.excard.com.myR

Tutorial How to Prepare Packaging Artwork

The table below shows the artwork file preparation page sequence for optional finishing combinations.

Artwork without Any Optional Finishing Artwork with Spot UV only

Page 1: Full artwork with die-line (with Die-line Indicator)Page 2: Printable artwork onlyPage 3: Die-line only (with Die-line Indicator)

Page 1: Full artwork with die-line (with Die-line Indicator)Page 2: Printable artwork onlyPage 3: Spot UV artwork in Process Black ColourPage 4: Die-line only (with Die-line Indicator)

Artwork with Hot Stamping only Artwork with Embossing only

Page 1: Full artwork with die-line and Hot Stamping artwork (with Die-line Indicator)Page 2: Printable artwork onlyPage 3: Hot Stamping artwork in Pantone Colour CodePage 4: Die-line only (with Die-line Indicator)

Page 1: Full artwork with die-line (with Die-line Indicator)Page 2: Printable artwork onlyPage 3: Embossing artwork in Process Page 4: Die-line only (with Die-line Indicator)

Artwork with Spot UV + Hot Stamping Artwork with Spot UV + Embossing

Page1: Full artwork with die line and Hot Stamping artwork (with Die-line Indicator)Page2: Printable artwork onlyPage3: Spot UV artwork in Process Black ColourPage4: Hot Stamping artwork in Pantone Colour CodePage5: Die-line only (with Die-line Indicator)

Page1: Full artwork with die-line (with Die-line Indicator)Page2: Printable artwork onlyPage3: Spot UV artwork in Process Black ColourPage4: Embossing artwork in Process Cyan ColourPage5: Die-line only (with Die-line Indicator)

Artwork with Hot Stamping + Embossing Artwork with Hot Stamping + Spot UV + Embossing

Page1: Full artwork with die-line and Hot Stamping artwork (with Die-line Indicator)Page2: Printable artwork onlyPage3: Hot Stamping artwork in Pantone Colour CodePage4: Embossing artwork in Process Cyan ColourPage5: Die-line only (with Die-line Indicator)

Page1: Full artwork with die-line and Hot Stamping artwork (with Die-line Indicator)Page2: Printable artwork onlyPage3: Spot UV artwork in Process Black ColourPage4: Hot Stamping artwork in Pantone Colour CodePage5: Embossing artwork in Process Cyan ColourPage6: Die-line only (with Die-line Indicator)

Cyan Colour

www.excard.com.myR

4

Tutorial How to Prepare Packaging Artwork

MOULD NO.: PBX - 12 - 303DIMENSION: 118mm (W) x 64mm (D) x 99.5mm (H)

DIECUT

CREASING

PERFORATED

PERFORATED DEPTH

2 POINT

NIL

NIL

MOULD NO.: PBX - 12 - 303DIMENSION: 118mm (W) x 64mm (D) x 99.5mm (H)

DIECUT

CREASING

PERFORATED

PERFORATED DEPTH

2 POINT

NIL

NIL

Below are examples of artwork submission pages with optional finishing (Spot UV, Hot Stamping & Embossing).

Page 1: Artwork with die-line and Hot Stamping artwork (with Die-line Indicator).

Indicator can be minimized to fit within available space(if applicable).

Page 2: Printable artwork only.

HotStamping

姐妹饼家

www.excard.com.myR

5

Tutorial How to Prepare Packaging Artwork

Page 4: Hot Stamping artwork in Pantone Colour Code [Pantone 817C (Gold) or Pantone 877C(Silver)].

Page 3: Spot UV artwork in Process Black Colour (C=0 , M=0, Y=0, K=100).

www.excard.com.myR

6

Tutorial How to Prepare Packaging Artwork

Page 5: Embossing Artwork in Process Cyan Colour (C=100, M=0, Y=0, K=0).

Page 6: Die-line only (with Die-line Indicator if applicable).

MOULD NO.: PBX - 12 - 303DIMENSION: 118mm (W) x 64mm (D) x 99.5mm (H)

DIECUT

CREASING

PERFORATED

PERFORATED DEPTH

2 POINT

NIL

NIL

MOULD NO.: PBX - 12 - 303DIMENSION: 118mm (W) x 64mm (D) x 99.5mm (H)

DIECUT

CREASING

PERFORATED

PERFORATED DEPTH

2 POINT

NIL

NIL

Indicator can be minimized to fit within available space.