how to make wood crafts cars

2
How to Make Wood Crafts cars The following brief overview: 1. First prepare the ingredients. 2. Divide and cut the wood to size using a saw serkel types of models. 3. Giving shape pattern on wood. 4. Sawing wood that has been given a pattern using a jet of Allah saws. 5. Clean the wood surface so that average use sandpaper dynamo. 6. Gluing wood surfaces with each other using wood glue. 7. Shaping, smoothing body using sandpaper dynamo. 8. Giving a hole using a drill. 9. Make wheel using wood lathe. 10. Smooth the surface after all the stages are finished using fine sandpaper cloth. 11. Finishing by spraying the surface using a compressor to spray melamine. Cara Membuat Kerajinan Kayu Mobil-Mobilan Berikut ini gambaran singkatnya : 1. Pertama menyiapkan bahan-bahannya. 2. Membelah dan memotong kayu sesuai ukuran jenis model menggunakan gergaji serkel. 3. Memberi bentuk pola pada kayu. 4. Menggergaji kayu yang sudah diberi pola menggunakan gergaji jet saw. 5. Membersihkan permukaan kayu supaya rata menggunakan dinamo amplas.

Upload: pu-pus

Post on 20-Nov-2015

15 views

Category:

Documents


2 download

DESCRIPTION

kl

TRANSCRIPT

How to Make Wood Crafts cars

How to Make Wood Crafts carsThe following brief overview:1. First prepare the ingredients.2. Divide and cut the wood to size using a saw serkel types of models.3. Giving shape pattern on wood.4. Sawing wood that has been given a pattern using a jet of Allah saws.5. Clean the wood surface so that average use sandpaper dynamo.6. Gluing wood surfaces with each other using wood glue.7. Shaping, smoothing body using sandpaper dynamo.8. Giving a hole using a drill.9. Make wheel using wood lathe.

10. Smooth the surface after all the stages are finished using fine sandpaper cloth.11. Finishing by spraying the surface using a compressor to spray melamine.Cara Membuat Kerajinan Kayu Mobil-Mobilan

Berikut ini gambaran singkatnya :

1. Pertama menyiapkan bahan-bahannya.

2. Membelah dan memotong kayu sesuai ukuran jenis model menggunakan gergaji serkel.

3. Memberi bentuk pola pada kayu.

4. Menggergaji kayu yang sudah diberi pola menggunakan gergaji jet saw.

5. Membersihkan permukaan kayu supaya rata menggunakan dinamo amplas.

6. Mengelem permukaan kayu satu dengan lainya menggunakan lem kayu.

7. Membentuk, menghaluskan bodi menggunakan dinamo amplas.

8. Memberi lubang menggunakan bor.

9. Membuat roda menggunakan mesin bubut kayu.

10. Menghaluskan permukaan setelah semua tahap selesai menggunakan kain amplas halus.

11. Finishing dengan penyemprotan permukaan menggunakan kompressor untuk menyemprotkan melamine.