how to make sweet spiral ring diy jewelry making tutorial
TRANSCRIPT
How To Make: Sweet Spiral Ring
Materials: 9 inches of 20 Gauge copper wire, 2 blue beads - size 5 mm
!Take notice that 9 inches of the wire is for ring size 8, if you wish to make smaller or bigger size cut more or less wire!
Tools: Round Nose Pliers, Wire Cutters
Step 1: Take a blue bead and wrap wire around it as tightly as you can. You can wrap wire around it few times
Step 2: Shape desired ring size on mandrel (in this case it should be size 8)
Step 3: Put second bead onto wire as shown in the photo, then start wrapping wire around it
Step 4: Take the ring off the mandrel, and finish wrapping wire around the second bead. Wrap it few times
Step 5: Trim wire if you need too, then bend the remaining wire closely to the bead
Step 6: Again shape the ring on the mandrel to give it final shape. Now your ring is ready to wear!