How to create EDS file via EDSBuilder software

�Hardware setup:

�Pin definition of IFD6500:

�Pin definition of RS-485 of VFD-EL:

�Software setup:

�Executing the EDSBuilder:

�Opening the new EDS file:

�Switching to DeviceNet mode to create the EDS file and choosing the extension module of CME-DN01 as well

�Choosing VFD-EL as the device of EDS file and selecting the right COM port, then let the software takes care of

the remaining connection

�Pressing the button of Auto test and you will see whether the connection is fail or not at the below window

�Pressing the button of load, then the EDS file has been creating through the process.

� The left side widow will be showing the content of EDS file

� Saving the EDS file into your preference data folder

~END~