how to configure a d link air plus xtreme g wireless router

8
HOW TO CONFIGURE A D-LINK AIRPLUS XTREME G WIRELESS ROUTER

Upload: sofia-martin

Post on 15-Apr-2017

14 views

Category:

Internet


3 download

TRANSCRIPT

Page 1: How to configure a d link air plus xtreme g wireless router

HOW TO CONFIGURE A D-LINK AIRPLUS XTREME G WIRELESS ROUTER

Page 2: How to configure a d link air plus xtreme g wireless router

D-Link AirPlus Xtreme G wireless routers are highly demanded in various big enterprises for high-speed Internet. In fact, they are very reliable and provide data transfers of up to 108 Mbps. You can configure your router to keep your wireless network secure because if it will be used by more than selected people then you might face speed issue. Furthermore, not securing your router is the equivalent of leaving the network wide open for anyone to access.

Page 3: How to configure a d link air plus xtreme g wireless router

At Dlink router support Australia, our technical experts helped you to configure your router by yourself, for that they have provided few steps, which are arranged in a very simple language. You will require a Network cable for that.

1-800-954-282

Page 4: How to configure a d link air plus xtreme g wireless router

Step1-Connect a cable from your modem to one of the ports on the back of the router

Page 5: How to configure a d link air plus xtreme g wireless router

Step2-Type the router's IP address -- 192.168.0.1 --into your browser's address bar and hit "Enter." This will take you to the log-in page for your router.

Step3-Type "admin" as the username and type "password" as the password, Click "OK."

Page 6: How to configure a d link air plus xtreme g wireless router

Step4-Change the SSID to a term that is familiar to you. You can use anything that you can easily remember for this setting.

Step5-Select "Enabled" to set WEP as the security setting and assign the level of encryption you want -- 64-bit or 128-bit.

Page 7: How to configure a d link air plus xtreme g wireless router

Step6-Select a key type -- either HEX or ASCII and enter a pass code that you can remember, such as orange1234. Click "Apply" to complete your router's configuration.

Step7-Disconnect the Internet cable you connected in Step 1.

Page 8: How to configure a d link air plus xtreme g wireless router

While following these steps you need to consider that you will need the SSID and WEP keys to set up your wireless clients. Our main motive is to provide you trouble free browsing experience and for that we are making our complete efforts to assist you in a best possible manner. So for any further assistance or technical error you can contact Dlink support Australia. At this, we provide assistance from Australia.

Original Source: dlinkroutersupportnumberaustralia.blogspot.com