how to choose your laser machine

Which one to choose?

Advantage of new D series CO2 laser machine

No need USB dongle drive

Ordinary model

D series

LCD control panel

Hand-held control panel

Ordinary water chiller

Compressor water chiller

Ordinary exhaust fan

Professional convulsions system

Ordinary model

D series

built-in type fan

Outside fan Ordinary connector

Integrated connector

Ordinary model

D series

Ordinary air pipe

Telescopic air duct Professional two-stage ventilation pipe

Ordinary one-stage ventilation pipe

Ordinary model

D series

Ordinary motion control card

motion control card with shield

Transfer-type USB data cable

Direct-type USB data cable

Ordinary model

D series

Ordinary door holder

Inside doorknob

Faster roller linear guide rail

Ordinary linear guide rail

Open-design back cover of laser machine

Fixed back cover of laser machine

Ordinary model

D series

Software of Ordinary model

Software of D series

GN-D10060 GN-D13080 GN-DS1601001000mm X 600mm 1300mm X 800mm 1600mm X 1000mm

Single-head Single-head Double-head

Test is finished , ready for packing

Equipment are packed, load in container

Good Price High Quality

$ R$HURRY UP !

CONTACT US !

Technical parameter

220V,50HZ (standard) / 220V,60HZ(optional)Power supply

1600x1000mm1300x800mm

Thicker honeycomb working tableWorking table0-1200mm/sEngraving speed0-500mm/sCutting speed

1.2KWWhole power

Specialized compressor water chillerCooling modePLT, AI, DXF, DST,JPG, BMP, GIF, PNG, TGA, TIFCompatible file format

1000x600mmWorking area70W/80W/100W/130W/150WLaser power (optional)65WLaser power (standard)10600nmLaser wavelength

Hermetic and detached CO2 laser tubeLaser typeGN-DS160100GN-D13080GN-D10060Model

Advantage of D-series CO2 laser cutting engraving machine

1. Fashion and elegant appearance, line fluency.

2. Canceled previous software controlling by soft dongle, upgraded to non-soft

dongle mode.

3. Split-type design for the machine, easy disassembly .

4. Upgraded control panel to hand-held controller, which avoid control panel

damage caused by smoke, reduce the equipment failure rates. Installing magnet

in hand-held controller, so the controller can be fixed in any place randomly.

The connection of between hand-held controller and laser equipment adopts coil

cord and aviation plugs to connect hand-held controller and laser equipment,

easy manipulation.


5. Simplified the setting of engraving parameter, it is easier for users to set

engraving parameter. The software can match the engraving parameters

automatically to get better engraving effect.

6. Increased parameter library in the upgraded software, which can save different

parameters used for processing different material to the parameter library. Users

can call these parameter directly next time.

7. Designed the air inlet for ventilation, ensure the internal pressure balance of

working table in ventilation. It avoids the material depression in the holes of

working table which is caused by excessive suction.

8. Sufficient space has been left for replacing more powerful laser tube in future.

Replacing higher power laser tube is not restricted by machine shell any longer.


9. Door lock of laser machine is upgraded to recoil-type lock, more beautiful and

convenient.

10. Upgrading he back cover where install the laser tube to an open design which

can open completely. It is more convenient to replace the laser tube.

11. Upgraded original inserted pin in the connection between front & rear cover and

machine shield to hinge-type. So that the switching is more comfortable, but

also eliminate the friction between machine cover and machine shield .

12. Running speed of the upgraded laser equipment has increased by 30%.

13. Upgrading mechanical transmission guide rail to roller linear guide rail , which

runs quieter and faster.


14. The production technology of machine shell have been upgraded and improved,

so that the door can fit better with main body and other parts, it is easier for

dismantling.

15. Upgraded the technology of interface identifier. The original sticking labels has

been replaced by printed labels, more solid, and waterproof, long life, will not

fall off.

16. The upgraded exhaust fan is with small volume, low noise and strong power

17. Upgraded to two-stage ventilation pipe, the internal section has been installed in

our factory, users only need to install from the outside. It avoids the

inconvenience of installing pipe in original design.


18. Mechanical structure has been upgraded and improved, more stable, making

operation more smoothly.

19. Installing shield to motion control card, it is dust-proof, anti-interference, and

anti-static.

20. Optimizing the up, down, left and right limitation protection way in four corners

ensure the equipment runs without collision, more reliable and safe.

21. Upgraded original three-axis motion control card to four-axis, so that the

material-feeding axis can co-exist with elevating axis together. It provides

expansion port to the multifunction of laser equipment.


22. The upgrading of motion control card enhances parameter-read function. The

original one-way data write from computer to equipment has been upgraded to

two-way data write and read from computer and equipment. The data writing,

adjustment and management are more convenient.

23. Upgraded the electrical cooling device to built-in type, reducing the airborne

dust into the electrical cabinet. The equipment inner environment is cleaner.

24. Randomly presented a 2G USB flash disk, saving more abundant files.

25. Upgraded laser head, changed the air flow channel, and made airflow be more

concentrated and even.

26. Enhanced the communication ability between hand-held controller and laser

machine equipment. The users can operate the machine and modify parameters

by hand-held controller directly.


27. Increased parameter categories, classified some parameters which doesn’t need

to adjust by users as manufacturers parameters, and manage them by password.

It simplifies the interface of parameter setting, and makes the users adjust

parameter more clear and simple.

28. Upgraded Frame mode. It contains Track frame, cut frame and dot corners.

29. Increased the function of modifying parameter in hand-held controller.

30. Increased the function of modifying speed and power online during the working

of equipment.

31. Increased the function of graphic layer simulation for engraved graphics. The

users can see the simulative effects after engraving visually.

32. Simplified the setting of cutting parameter, it is easier for users to set cutting

parameter.


33. The compatible file format of upgraded software is more abundant. It supports

almost all two-dimensional graphical formats in the market.

34. Double laser head mode, which controls the power of two laser head separately

and effectively.

35. After installing the software in computer, it must connect to laser equipment

when you turn on the equipment for the first time. And it doesn’t need to

connect with equipment from next time. The software is very convenient to use.

36. Enhanced graphics function. It has increased Bezier curves and node editing

features, which is consistent with CORELDRAW.

37. Increased the function of graphic coordinates and graph size.


38. It is more consistent with the embedding of CORELDRAW. It only needs

CORELDRAW t draw graphics, the parameter setting still complete in the

software. The operation is very convenient.

39. Supporting more advanced version of CORELDRAW and AUTOCAD. The

users will not be perplexed by choosing correct version of software no longer.

Sample Show

Wuhan GN Laser Equipment Manufacturing Co., Ltd.Add: No.82, Jiahe Road, Hanyang District, Wuhan, ChinaE-mail: [email protected]: +86-27-84530965, 84530966Fax: +86-27-83600135Http://www.gnlaser.com

Contact us

how to choose your laser machine

Technology