how to change coil orifice - alpine home air
TRANSCRIPT
Attach feeder tube providedwith coil and tighten in place.
(Separate Photo Sequence Below)
11. Remove the cap fromthe suction line.
12. Release the pressure in the coilby pressing the Shrader valvedown until all nitrogen has beenreleased from the unit.
13. Unscrew feeder tubecompletely from theevaporator coil.
14. Here is the feeder tuberemoved from theevaporator coil.
15. Unscrew hex nut completelyfrom the liquid line on theevaporator coil.
16. Here is the hex nut removed.NOTE: LEAVE IN WHITE O-RING.
17. Slide the feeder tube throughthe back end of the hex nutso the flared end faces out.
18. Re-attach hex nut, with feedertube pulled through the nut, tothe coil. Flared end facing out.
19. Here is what the finishedproduct should look like.