how to build network model using pipsim
TRANSCRIPT
Prepared by:
Mustafa Abdolmotaleb
1
Agenda
Project Objectives
Steps of building pipesim network model
Building well models
Pressure \ temperature profile
Inserting ESP performance curve
Modeling Multi-Zones well (3 Zones)
Constructing the Network Model
Displaying the results
Conclusion
2
Project Objectives
To build a representative network model for one
OGM(Oil Gathering Manifold) in H Field consists of
4 wells using PIPESIM software.
To match the network model with the field data.
To display & analyze the results after building the
model.
3
Steps of building pipesim network model
Interpretation of results
Run model
Define boundary conditions
Select flow correlation
Make single branch model
Build and connect network model
Set fluid data for black oil
Units
Select pipes in model
4
Building well models
5
Pressure/Temperature Profile
6
Inserting ESP Performance Curves
7
Modeling Multi-Zones well (3 Zones)
Black Oil Model
8
Pressure/Temperature Profile
9
Constructing the Network Model
10
Displaying the results
11
Displaying the results
12
Conclusion The model has been matched with the real field data.
The model is now reliable for further production
optimization analysis.
All the pressure/Temperature profiles for all the wells
have been calculated from the reservoir to the delivery
point.
13