how lc ds work

31
How LCDs Work by Jeff Tyson › Introduction to How LCDs Work Liquid Crystals Building a Simple LCD Backlit vs. Reflective LCD Systems Color LCD Advances Lots More Information Shop or Compare Prices You probably use items containing an LCD (liquid crystal display) every day. They are all around us -- in laptop computers , digital clocks and watches , microwave ovens , CD players and many other electronic devices. LCDs are common because they offer some real advantages over other display technologies. They are thinner and lighter and draw much less power than cathode ray tubes (CRTs), for example. A simple LCD display from a calculator But just what are these things called liquid crystals? The name "liquid crystal" sounds like a contradiction. We think of a crystal as a solid material like quartz, usually as hard as rock, and a liquid is obviously different. How could any material combine the two? In this edition of HowStuffWorks , you'll find out how liquid crystals pull off this amazing trick, and we will look at the underlying technology that makes LCDs work. You'll also learn how the strange characteristics of liquid crystals have been used to create a new kind of shutter and how grids of these tiny shutters open and close to make patterns that represent numbers, words or images! LCD History Today, LCDs are everywhere we look, but they didn't sprout up

Upload: mukul-chandel

Post on 11-May-2015

331 views

Category:

Business


3 download

TRANSCRIPT

Page 1: How lc ds work

How LCDs Workby Jeff Tyson   › Introduction to How LCDs Work

› Liquid Crystals› Building a Simple LCD› Backlit vs. Reflective› LCD Systems› Color› LCD Advances› Lots More Information› Shop or Compare Prices

You probably use items containing an LCD (liquid crystal display) every day. They are all around us -- in laptop computers, digital clocks and watches, microwave ovens, CD players and many other electronic devices. LCDs are common because they offer some real advantages over other display technologies. They are thinner and lighter and draw much less power than cathode ray tubes (CRTs), for example.

A simple LCD display from a calculator

But just what are these things called liquid crystals? The name "liquid crystal" sounds like a contradiction. We think of a crystal as a solid material like quartz, usually as hard as rock, and a liquid is obviously different. How could any material combine the two?

In this edition of HowStuffWorks, you'll find out how liquid crystals pull off this amazing trick, and we will look at the underlying technology that makes LCDs work. You'll also learn how the strange characteristics of liquid crystals have been used to create a new kind of shutter and how grids of these tiny shutters open and close to make patterns that represent numbers, words or images!

LCD HistoryToday, LCDs are everywhere we look, but they didn't sprout up overnight. It took a long time to get from the discovery of liquid crystals to the multitude of LCD applications we now enjoy. Liquid crystals were first discovered in 1888, by Austrian botanist Friedrich Reinitzer. Reinitzer observed that when he melted a curious cholesterol-like substance (cholesteryl benzoate), it first became a cloudy liquid and then cleared up as its temperature rose. Upon cooling, the liquid turned blue before finally crystallizing. Eighty years passed before RCA made the first experimental LCD in 1968. Since then, LCD manufacturers have steadily developed ingenious variations and improvements on the technology, taking the LCD to amazing levels of technical complexity. And there is every indication that we will continue to enjoy new LCD developments in the future

Page 2: How lc ds work

Liquid CrystalsWe learned in school that there are three common states of matter: solid, liquid or gaseous. Solids act the way they do because their molecules always maintain their orientation and stay in the same position with respect to one another. The molecules in liquids are just the opposite: They can change their orientation and move anywhere in the liquid. But there are some substances that can exist in an odd state that is sort of like a liquid and sort of like a solid. When they are in this state, their molecules tend to maintain their orientation, like the molecules in a solid, but also move around to different positions, like the molecules in a liquid. This means that liquid crystals are neither a solid nor a liquid. That's how they ended up with their seemingly contradictory name.

So, do liquid crystals act like solids or liquids or something else? It turns out that liquid crystals are closer to a liquid state than a solid. It takes a fair amount of heat to change a suitable substance from a solid into a liquid crystal, and it only takes a little more heat to turn that same liquid crystal into a real liquid. This explains why liquid crystals are very sensitive to temperature and why they are used to make thermometers and mood rings. It also explains why a laptop computer display may act funny in cold weather or during a hot day at the beach!

Just as there are many varieties of solids and liquids, there is also a variety of liquid crystal substances. Depending on the temperature and particular nature of a substance, liquid crystals can be in one of several distinct phases (see below). In this article, we will discuss liquid crystals in the nematic phase, the liquid crystals that make LCDs possible.

One feature of liquid crystals is that they're affected by electric current. A particular sort of nematic liquid crystal, called twisted nematics (TN), is naturally twisted. Applying an electric current to these liquid crystals will untwist them to varying degrees, depending on the current's voltage. LCDs use these liquid crystals because they react predictably to electric current in such a way as to control light passage.

Liquid Crystal TypesMost liquid crystal molecules are rod-shaped and are broadly categorized as either

thermotropic or lyotropic.

Image courtesy Dr. Oleg Lavrentovich, Liquid Crystal InstituteThermotropic liquid crystals will react to changes in temperature or, in some cases, pressure. The reaction of lyotropic liquid crystals, which are used in the manufacture of soaps and detergents, depends on the type of solvent they are mixed with. Thermotropic liquid crystals are either isotropic or nematic. The key difference is that the molecules in isotropic liquid crystal substances are random in their arrangement, while nematics have a definite order or pattern.

The orientation of the molecules in the nematic phase is based on the director. The director can be anything from a magnetic field to a surface that has microscopic grooves in it. In the nematic phase, liquid crystals can be further classified by the way molecules orient themselves

Page 3: How lc ds work

in respect to one another. Smectic, the most common arrangement, creates layers of molecules. There are many variations of the smectic phase, such as smectic C, in which the molecules in each layer tilt at an angle from the previous layer. Another common phase is cholesteric, also known as chiral nematic. In this phase, the molecules twist slightly from one layer to the next, resulting in a spiral formation.

Ferroelectric liquid crystals (FLCs) use liquid crystal substances that have chiral molecules in a smectic C type of arrangement because the spiral nature of these molecules allows the microsecond switching response time that make FLCs particularly suited to advanced displays. Surface-stabilized ferroelectric liquid crystals (SSFLCs) apply controlled pressure through the use of a glass plate, suppressing the spiral of the molecules to make the switching even more rapid.

Building a Simple LCDThere's far more to building an LCD than simply creating a sheet of liquid crystals. The combination of four facts makes LCDs possible:

Light can be polarized. (See How Sunglasses Work for some fascinating information on polarization!)

Liquid crystals can transmit and change polarized light. The structure of liquid crystals can be changed by electric current. There are transparent substances that can conduct electricity.

An LCD is a device that uses these four facts in a surprising way!

To create an LCD, you take two pieces of polarized glass. A special polymer that creates microscopic grooves in the surface is rubbed on the side of the glass that does not have the polarizing film on it. The grooves must be in the same direction as the polarizing film. You then add a coating of nematic liquid crystals to one of the filters. The grooves will cause the first layer of molecules to align with the filter's orientation. Then add the second piece of glass with the polarizing film at a right angle to the first piece. Each successive layer of TN molecules will gradually twist until the uppermost layer is at a 90-degree angle to the bottom, matching the polarized glass filters.

As light strikes the first filter, it is polarized. The molecules in each layer then guide the light they receive to the next layer. As the light passes through the liquid crystal layers, the molecules also change the light's plane of vibration to match their own angle. When the light reaches the far side of the liquid crystal substance, it vibrates at the same angle as the final layer of molecules. If the final layer is matched up with the second polarized glass filter, then the light will pass through.

Page 4: How lc ds work

If we apply an electric charge to liquid crystal molecules, they untwist! When they straighten out, they change the angle of the light passing through them so that it no longer matches the angle of the top polarizing filter. Consequently, no light can pass through that area of the LCD, which makes that area darker than the surrounding areas.

Building a simple LCD is easier than you think. Your start with the sandwich of glass and liquid crystals described above and add two transparent electrodes to it. For example, imagine that you want to create the simplest possible LCD with just a single rectangular electrode on it. The layers would look like this:

The LCD needed to do this job is very basic. It has a mirror (A) in back, which makes it reflective. Then, we add a piece of glass (B) with a polarizing film on the bottom side, and a common electrode plane (C) made of indium-tin oxide on top. A common electrode plane covers the entire area of the LCD. Above that is the layer of liquid crystal substance (D). Next comes another piece of glass (E) with an electrode in the shape of the rectangle on the bottom and, on top, another polarizing film (F), at a right angle to the first one.

The electrode is hooked up to a power source like a battery. When there is no current, light entering through the front of the LCD will simply hit the mirror and bounce right back out. But when the battery supplies current to the electrodes, the liquid crystals between the common-plane electrode and the electrode shaped like a rectangle untwist and block the light in that region from passing through. That makes the LCD show the rectangle as a black area.

Page 5: How lc ds work

Backlit vs. ReflectiveNote that our simple LCD required an external light source. Liquid crystal materials emit no light of their own. Small and inexpensive LCDs are often reflective, which means to display anything they must reflect light from external light sources. Look at an LCD watch: The numbers appear where small electrodes charge the liquid crystals and make the layers untwist so that light is not transmitting through the polarized film.

Most computer displays are lit with built-in fluorescent tubes above, beside and sometimes behind the LCD. A white diffusion panel behind the LCD redirects and scatters the light evenly to ensure a uniform display. On its way through filters, liquid crystal layers and electrode layers, a lot of this light is lost -- often more than half!

In our example, we had a common electrode plane and a single electrode bar that controlled which liquid crystals responded to an electric charge. If you take the layer that contains the single electrode and add a few more, you can begin to build more sophisticated displays.

LCD SystemsCommon-plane-based LCDs are good for simple displays that need to show the same information over and over again. Watches and microwave timers fall into this category. Although the hexagonal bar shape illustrated previously is the most common form of electrode arrangement in such devices, almost any shape is possible. Just take a look at some inexpensive handheld games: Playing cards, aliens, fish and slot machines are just some of the electrode shapes you'll see!

There are two main types of LCDs used in computers, passive matrix and active matrix.

Passive-matrix LCDs use a simple grid to supply the charge to a particular pixel on the display. Creating the grid is quite a process! It starts with two glass layers called substrates. One substrate is given columns and the other is given rows made from a transparent conductive material. This is usually indium-tin oxide. The rows or columns are connected to

Page 6: How lc ds work

integrated circuits that control when a charge is sent down a particular column or row. The liquid crystal material is sandwiched between the two glass substrates, and a polarizing film is added to the outer side of each substrate. To turn on a pixel, the integrated circuit sends a charge down the correct column of one substrate and a ground activated on the correct row of the other. The row and column intersect at the designated pixel, and that delivers the voltage to untwist the liquid crystals at that pixel.

The simplicity of the passive-matrix system is beautiful, but it has significant drawbacks, notably slow response time and imprecise voltage control. Response time refers to the LCD's ability to refresh the image displayed. The easiest way to observe slow response time in a passive-matrix LCD is to move the mouse pointer quickly from one side of the screen to the other. You will notice a series of "ghosts" following the pointer. Imprecise voltage control hinders the passive matrix's ability to influence only one pixel at a time. When voltage is applied to untwist one pixel, the pixels around it also partially untwist, which makes images appear fuzzy and lacking in contrast.

Active-matrix LCDs depend on thin film transistors (TFT). Basically, TFTs are tiny switching transistors and capacitors. They are arranged in a matrix on a glass substrate. To address a particular pixel, the proper row is switched on, and then a charge is sent down the correct column. Since all of the other rows that the column intersects are turned off, only the capacitor at the designated pixel receives a charge. The capacitor is able to hold the charge until the next refresh cycle. And if we carefully control the amount of voltage supplied to a crystal, we can make it untwist only enough to allow some light through. By doing this in very exact, very small increments, LCDs can create a gray scale. Most displays today offer 256 levels of brightness per pixel.

Page 7: How lc ds work

ColorAn LCD that can show colors must have three subpixels with red, green and blue color filters to create each color pixel.

Through the careful control and variation of the voltage applied, the intensity of each subpixel can range over 256 shades. Combining the subpixels produces a possible palette of 16.8 million colors (256 shades of red x 256 shades of green x 256 shades of blue), as shown below. These color displays take an enormous number of transistors. For example, a typical laptop computer supports resolutions up to 1,024x768. If we multiply 1,024 columns by 768 rows by 3 subpixels, we get 2,359,296 transistors etched onto the glass! If there is a problem with any of these transistors, it creates a "bad pixel" on the display. Most active matrix displays have a few bad pixels scattered across the screen.

LCD AdvancesLCD technology is constantly evolving. LCDs today employ several variations of liquid crystal technology, including super twisted nematics (STN), dual scan twisted nematics (DSTN), ferroelectric liquid crystal (FLC) and surface stabilized ferroelectric liquid crystal (SSFLC). For an in-depth (and pretty technical) article that addresses all of technologies, see Liquid Crystal Materials.

Display size is limited by the quality-control problems faced by manufacturers. Simply put, to increase display size, manufacturers must add more pixels and transistors. As they increase the number of pixels and transistors, they also increase the chance of including a bad transistor in a display. Manufacturers of existing large LCDs often reject about 40 percent of the panels that come off the assembly line. The level of rejection directly affects LCD price since the sales of the good LCDs must cover the cost of manufacturing both the good and bad ones. Only advances in manufacturing can lead to affordable displays in bigger sizes.

For more information on LCDs and related topics, check out the links on the next page.

Page 8: How lc ds work

How Plasma Displays Workby Tom Harris   › Introduction to How Plasma Displays

Work› What is Plasma?› Inside the Display› Lots More Information› Shop or Compare Prices

For the past 75 years, the vast majority of televisions have been built around the same technology: the cathode ray tube (CRT). In a CRT television, a gun fires a beam of electrons (negatively-charged particles) inside a large glass tube. The electrons excite phosphor atoms along the wide end of the tube (the screen), which causes the phosphor atoms to light up. The television image is produced by lighting up different areas of the phosphor coating with different colors at different intensities (see How Televisions Work for a detailed explanation).

Cathode ray tubes produce crisp, vibrant images, but they do have a serious drawback: They are bulky. In order to increase the screen width in a CRT set, you also have to increase the length of the tube (to give the scanning electron gun room to reach all parts of the screen). Consequently, any big-screen CRT television is going to weigh a ton and take up a sizable chunk of a room.

Recently, a new alternative has

What is Plasma?If you've read How Televisions Work, then you understand the basic idea of a standard television or monitor. Based on the information in a video signal, the television lights up

Photo courtesy SonyA plasma display from Sony

Page 9: How lc ds work

thousands of tiny dots (called pixels) with a high-energy beam of electrons. In most systems, there are three pixel colors -- red, green and blue -- which are evenly distributed on the screen. By combining these colors in different proportions, the television can produce the entire color spectrum.

The basic idea of a plasma display is to illuminate tiny colored fluorescent lights to form an image. Each pixel is made up of three fluorescent lights -- a red light, a green light and a blue light. Just like a CRT television, the plasma display varies the intensities of the different lights to produce a full range of colors.

The central element in a fluorescent light is a plasma, a gas made up of free-flowing ions (electrically charged atoms) and electrons (negatively charged particles). Under normal conditions, a gas is mainly made up of uncharged particles. That is, the individual gas atoms include equal numbers of protons (positively charged particles in the atom's nucleus) and electrons. The negatively charged electrons perfectly balance the positively charged protons, so the atom has a net charge of zero.

If you introduce many free electrons into the gas by establishing an electrical voltage across it, the situation changes very quickly. The free electrons collide with the atoms, knocking loose other electrons. With a missing electron, an atom loses its balance. It has a net positive charge, making it an ion.

In a plasma with an electrical current running through it, negatively charged particles are rushing toward the positively charged area of the plasma, and positively charged particles are rushing toward the negatively charged area.

Tuning InMost plasma displays aren't technically televisions, because they don't have a television tuner. The television tuner is the device that takes a television signal (the one coming from a cable wire, for example) and interprets it to create a video image.

Like LCD monitors, plasma displays are just monitors that display a standard video signal. To watch television on a plasma display, you have to hook it up to a separate unit that has its own television tuner, such as a VCR.

Page 10: How lc ds work

In this mad rush, particles are constantly bumping into each other. These collisions excite the gas atoms in the plasma, causing them to release photons of energy. (For details on this process, see How Fluorescent Lamps Work.)

Xenon and neon atoms, the atoms used in plasma screens, release light photons when they are excited. Mostly, these atoms release ultraviolet light photons, which are invisible to the human eye. But ultraviolet photons can be used to excite visible light photons, as we'll see in the next section.

Page 11: How lc ds work

Inside the DisplayThe xenon and neon gas in a plasma television is contained in hundreds of thousands of tiny cells positioned between two plates of glass. Long electrodes are also sandwiched between the glass plates, on both sides of the cells. The address electrodes sit behind the cells, along the rear glass plate. The transparent display electrodes, which are surrounded by an insulating dielectric material and covered by a magnesium oxide protective layer, are mounted above the cell, along the front glass plate.

Both sets of electrodes extend across the entire screen. The display electrodes are arranged in horizontal rows along the screen and the address electrodes are arranged in vertical columns. As you can see in the diagram below, the vertical and horizontal electrodes form a basic grid.

Page 12: How lc ds work

To ionize the gas in a particular cell, the plasma display's computer charges the electrodes that intersect at that cell. It does this thousands of times in a small fraction of a second, charging each cell in turn.

When the intersecting electrodes are charged (with a voltage difference between them), an electric current flows through the gas in the cell. As we saw in the last section, the current creates a rapid flow of charged particles, which stimulates the gas atoms to release ultraviolet photons.

The released ultraviolet photons interact with phosphor material coated on the inside wall of the cell. Phosphors are substances that give off light when they are exposed to other light. When an ultraviolet photon hits a phosphor atom in the cell, one of the phosphor's electrons jumps to a higher energy level and the atom heats up. When the electron falls back to its normal level, it releases energy in the form of a visible light photon.

The phosphors in a plasma display give off colored light when they are excited. Every pixel is made up of three separate subpixel cells, each with different colored phosphors. One subpixel has a red light phosphor, one subpixel has a green light phosphor and one subpixel has a blue light phosphor. These colors blend together to create the overall color of the pixel.

By varying the pulses of current flowing through the different cells, the control system can increase or decrease the intensity of each subpixel color to create hundreds of different combinations of red, green and blue. In this way, the control system can produce colors across the entire spectrum.

The main advantage of plasma display technology is that you can produce a very wide screen using extremely thin materials. And because each pixel is lit individually, the image is very bright and looks good from almost every angle. The image quality isn't quite up to the standards of the best cathode ray tube sets, but it certainly meets most people's expectations.

Page 13: How lc ds work

The biggest drawback of this technology has to be the price. With prices starting at $4,000 and going all the way up past $20,000, these sets aren't exactly flying off the shelves. But as prices fall and technology advances, they may start to edge out the old CRT sets. In the near future, setting up a new TV might be as easy as hanging a picture!

To learn more about plasma displays, as well as other television technologies, check out the links on the next page.

Page 14: How lc ds work

On the most basic level, human beings are made up of five major components:

A body structure A muscle system to move the body structure A sensory system that receives information about

the body and the surrounding environment A power source to activate the muscles and

sensors A brain system that processes sensory information

and tells the muscles what to do

Of course, we also have some intangible attributes, such as intelligence and morality, but on the sheer physical level, the list above about covers it.

A robot is made up of the very same components. A typical robot has a movable physical structure, a motor of some sort, a sensor system, a power supply and a computer "brain" that controls all of these elements. Essentially, robots are man-made versions of animal life -- they are machines that replicate human and animal behavior.

In this edition of HowStuffWorks, we'll explore the basic concept of robotics and find out how robots do what they do.

What is a Robot?Joseph Engelberger, a pioneer in industrial robotics, once remarked "I can't define a robot, but I know one when I see one." If you consider all the different machines people call robots, you can see that it's nearly impossible to come up with a comprehensive definition. Everybody has a different idea of what constitutes a robot.

You've probably heard of several of these famous robots:

R2D2 and C-3PO: The intelligent, speaking robots with loads of personality in the Star Wars movies

Sony's AIBO: A robotic dog that learns through human interaction Honda's ASIMO: A robot that can walk on two legs like a person Industrial robots: Automated machines that work on assembly lines Data: The almost human android from Star Trek BattleBots : The remote control fighters on Comedy Central Bomb-defusing robots The Mars Pathfinder : NASA's exploration robot HAL: The ship's computer in Stanley Kubrick's 2001: A Space Odyssey Robomower : The lawn-mowing robot from Friendly Robotics The Robot in the television series "Lost in Space" MindStorms : LEGO's popular robotics kit

HowStuffWorks has several articles on other types of robots:

How Robotic Surgery Will Work

Photo courtesy NASALike you, NASA's robonaut has a movable

body, brain, power system and sensor system.

Page 15: How lc ds work

How Robonauts Will Work How Snakebots Will Work How Rumble Robots Work How Stinger Missiles Work

All of these things are considered robots, at least by some people. The broadest definition around defines a robot as anything that a lot of people recognize as a robot. Most roboticists (people who build robots) use a more precise definition. They specify that robots have a reprogrammable brain (a computer) that moves a body.

By this definition, robots are distinct from other movable machines, such as cars, because of their computer element. Many new cars do have an onboard computer, but it's only there to make small adjustments. You control most elements in the car directly by way of various mechanical devices. Robots are distinct from ordinary computers in their physical nature -- normal computers don't have a physical body attached to them.

In the next section, we'll look at the major elements found in most robots today.

Robot BasicsThe vast majority of robots do have several qualities in common. First of all, almost all robots have a movable body. Some only have motorized wheels, and others have dozens of movable segments, typically made of metal or plastic. Like the bones in your body, the individual segments are connected together with joints.

Robots spin wheels and pivot jointed segments with some sort of actuator. Some robots use electric motors and solenoids as actuators; some use a hydraulic system; and some use a pneumatic system (a system driven by compressed gases). Robots may use all these actuator types.

A robot needs a power source to drive these actuators. Most robots either have a battery or they plug into the wall. Hydraulic robots also need a pump to pressurize the hydraulic fluid, and pneumatic robots need an air compressor or compressed air tanks.

The actuators are all wired to an electrical circuit. The circuit powers electrical motors and solenoids directly, and it activates the hydraulic system by manipulating electrical valves. The valves determine the pressurized fluid's path through the machine. To move a hydraulic leg, for example, the robot's controller would open the valve leading from the fluid pump to a piston cylinder attached to that leg. The pressurized fluid would extend the piston, swiveling the leg forward. Typically, in order to move their segments in two directions, robots use pistons that can push both ways.

The robot's computer controls everything attached to the circuit. To move the robot, the computer switches on all the necessary motors and valves. Most robots are

Photo courtesy NASAA robotic hand, developed by NASA, is

made up of metal segments moved by tiny motors. The hand is one of the most

difficult structures to replicate in robotics.

Page 16: How lc ds work

reprogrammable -- to change the robot's behavior, you simply write a new program to its computer.

Not all robots have sensory systems, and few have the ability to see, hear, smell or taste. The most common robotic sense is the sense of movement -- the robot's ability to monitor its own motion. A standard design uses slotted wheels attached to the robot's joints. An LED on one side of the wheel shines a beam of light through the slots to a light sensor on the other side of the wheel. When the robot moves a particular joint, the slotted wheel turns. The slots break the light beam as the wheel spins. The light sensor reads the pattern of the flashing light and transmits the data to the computer. The computer can tell exactly how far the joint has swiveled based on this pattern. This is the same basic system used in computer mice.

These are the basic nuts and bolts of robotics. Roboticists can combine these elements in an infinite number of ways to create robots of unlimited complexity. In the next section, we'll look at one of the most popular designs, the robotic arm.

The Robotic ArmThe term robot comes from the Czech word robota, generally translated as "forced labor." This describes the majority of robots fairly well. Most robots in the world are designed for heavy, repetitive manufacturing work. They handle tasks that are difficult, dangerous or boring to human beings.

Robotic arms are an essential part of car manufacturing.

The most common manufacturing robot is the robotic arm. A typical robotic arm is made up of seven metal segments, joined by six joints. The computer controls the robot by rotating individual step motors connected to each joint (some larger arms use hydraulics or pneumatics). Unlike ordinary motors, step motors move in exact increments (check out this site to find out how). This allows the computer to move the arm very precisely, repeating exactly the same movement over and over again. The robot uses motion sensors to make sure it moves just the right amount.

An industrial robot with six joints closely resembles a human arm -- it has the equivalent of a shoulder, an elbow and a wrist. Typically, the shoulder is mounted to a stationary base structure rather than to a movable body. This type of robot has six degrees of freedom, meaning it can pivot in six different ways. A human arm, by comparison, has seven degrees of freedom.

Page 17: How lc ds work

Your arm's job is to move your hand from place to place. Similarly, the robotic arm's job is to move an end effector from place to place. You can outfit robotic arms with all sorts of end effectors, which are suited to a particular application. One common end effector is a simplified version of the hand, which can grasp and carry different objects. Robotic hands often have built-in pressure sensors that tell the computer how hard the robot is gripping a particular object. This keeps the robot from dropping or breaking whatever it's carrying. Other end effectors include blowtorches, drills and spray painters.

Industrial robots are designed to do exactly the same thing, in a controlled environment, over and over again. For example, a robot might twist the caps onto peanut butter jars coming down an assembly line. To teach a robot how to do its job, the programmer guides the arm through the motions using a handheld controller. The robot stores the exact sequence of movements in its memory, and does it again and again every time a new unit comes down the assembly line.

Most industrial robots work in auto assembly lines, putting cars together. Robots can do a lot of this work more efficiently than human beings because they are so precise. They always drill in the exactly the same place, and they always tighten bolts with the same amount of force, no matter how many hours they've been working. Manufacturing robots are also very important in the computer industry. It takes an incredibly precise hand to put together a tiny microchip.

Writing RobotsThe Czech playwright Karel Capek originated the term robot in his 1920 play "R.U.R." In the play, machine workers overthrow their human creators when a scientist gives them emotions. Dozens of authors and filmmakers have revisited this scenario over the years.

Page 18: How lc ds work

Isaac Asimov took a more optimistic view in several novels and short stories. In his works, robots are benign, helpful beings that adhere to a code of nonviolence against humans -- the "Laws of Robotics."

Mobile RobotsRobotic arms are relatively easy to build and program because they only operate within a confined area. Things get a bit trickier when you send a robot out into the world.

Photo courtesy NASANASA's FIDO Rover is designed for exploration on Mars.

The first obstacle is to give the robot a working locomotion system. If the robot will only need to move over smooth ground, wheels or tracks are the best option. Wheels and tracks can also work on rougher terrain if they are big enough. But robot designers often look to legs instead, because they are more adaptable. Building legged robots also helps researchers understand natural locomotion -- it's a useful exercise in biological research.

Typically, hydraulic or pneumatic pistons move robot legs back and forth. The pistons attach to different leg segments just like muscles attach to different bones. It's a real trick getting all these pistons to work together properly. As a baby, your brain had to figure out exactly the right combination of muscle contractions to walk upright without falling over. Similarly, a robot designer has to figure out the right combination of piston movements involved in walking and program this information into the robot's computer. Many mobile robots have a built-in balance system (a collection of gyroscopes, for example) that tells the computer when it needs to correct its movements.

Page 19: How lc ds work

Photo courtesy NASANASA's Frogbot uses springs, linkages and motors to hop from place to place.

Bipedal locomotion (walking on two legs) is inherently unstable, which makes it very difficult to implement in robots. To create more stable robot walkers, designers commonly look to the animal world, specifically insects. Six-legged insects have exceptionally good balance, and they adapt well to a wide variety of terrain.

Some mobile robots are controlled by remote -- a human tells them what to do and when to do it. The remote control might communicate with the robot through an attached wire, or using radio or infrared signals. Remote robots, often called puppet robots, are useful for exploring dangerous or inaccessible environments, such as the deep sea or inside a volcano. Some robots are only partially controlled by remote. For example, the operator might direct the robot to go to a certain spot, but not steer it there -- the robot would find its own way.

What is it Good For?

Mobile robots stand in for people in a number of ways. Some explore other planets or inhospitable areas on Earth, collecting geological samples. Others seek out landmines in former battlefields. The police sometimes use mobile robots to search for a bomb, or even to apprehend a suspect.

Mobile robots also work in homes and businesses. Hospitals may use robots to transport medications. Some museums use robots to patrol their galleries at night, monitoring air quality and humidity levels. Several companies have developed robots that will vacuum your house while you sleep.

Page 20: How lc ds work

Autonomous MobilityAutonomous robots can act on their own, independent of any controller. The basic idea is to program the robot to respond a certain way to outside stimuli. The very simple bump-and-go robot is a good illustration of how this works.

This sort of robot has a bumper sensor to detect obstacles. When you turn the robot on, it zips along in a straight line. When it finally hits an obstacle, the impact pushes in its bumper sensor. The robot's programming tells it to back up, turn to the right and move forward again, in response to every bump. In this way, the robot changes direction any time it encounters an obstacle.

Photo courtesy NASAThe Urbie is an autonomous robot designed for various urban operations, including

military reconnaissanceand rescue operations.

Advanced robots use more elaborate versions of this same idea. Roboticists create new programs and sensor systems to make robots smarter and more perceptive. Today, robots can effectively navigate a variety of environments.

Simpler mobile robots use infrared or ultrasound sensors to see obstacles. These sensors work the same way as animal echolocation: The robot sends out a sound signal or a beam of infrared light and detects the signal's reflection. The robot locates the distance to obstacles based on how long it takes the signal to bounce back.

More advanced robots use stereo vision to see the world around them. Two cameras give these robots depth perception, and image-recognition software gives them the ability to locate and classify various objects. Robots might also use microphones and smell sensors to analyze the world around them.

Some autonomous robots can only work in a familiar, constrained environment. Lawn-mowing robots, for example, depend on buried border markers to define the limits of their yard. An office-cleaning robot might need a map of the building in order to maneuver from point to point.

Page 21: How lc ds work

More advanced robots can analyze and adapt to unfamiliar environments, even to areas with rough terrain. These robots may associate certain terrain patterns with certain actions. A rover robot, for example, might construct a map of the land in front of it based on its visual sensors. If the map shows a very bumpy terrain pattern, the robot knows to travel another way. This sort of system is very useful for exploratory robots that operate on other planets (check out this page to learn more).

An alternative robot design takes a less structured approach -- randomness. When this type of robot gets stuck, it moves its appendages every which way until something works. Force sensors work very closely with the actuators, instead of the computer directing everything based on a program. This is something like an ant trying to get over an obstacle -- it doesn't seem to make a decision when it needs to get over an obstacle, it just keeps trying things until it gets over it.

Homebrew RobotsIn the last couple of sections, we looked at the most prominent fields in the world of robots -- industry robotics and research robotics. Professionals in these fields have made most of the major advancements in robotics over the years, but they aren't the only ones making robots. For decades, a small but passionate band of hobbyists has been creating robots in garages and basements all over the world.

Homebrew robotics is a rapidly expanding subculture with a sizable Web presence. Amateur roboticists cobble together their creations using commercial robot kits, mail order components, toys and even old VCRs.

Homebrew robots are as varied as professional robots. Some weekend roboticists tinker with elaborate walking machines, some design their own service bots and others create competitive robots. The most familiar competitive robots are remote control fighters like you might see on "BattleBots." These machines aren't considered "true robots" because they don't have reprogrammable computer brains. They're basically souped-up remote control cars.

More advanced competitive robots are controlled by computer. Soccer robots, for example, play miniaturized soccer with no human input at all. A standard soccer bot team includes several individual robots that communicate with a central computer. The computer "sees" the entire soccer field with a video camera and picks out its own team members, the opponent's members, the ball and the goal based on their color. The computer processes this information at every second and decides how to direct its own team.

Check out the official RoboCup Web site for more information on Soccer robots, and this page for information on other robot competitions. This page will give you more information on building your own robots.  

Adaptable and UniversalThe personal computer revolution has been marked by extraordinary adaptability. Standardized hardware and programming languages let computer engineers and amateur programmers mold computers to their own particular purposes. Computer components are sort of like art supplies -- they have an infinite number of uses.

Page 22: How lc ds work

Most robots to date have been more like kitchen appliances. Roboticists build them from the ground up for a fairly specific purpose. They don't adapt well to radically new applications.

This situation may be changing. A new company called Evolution Robotics is pioneering the world of adaptable robotics hardware and software. The company hopes to carve out a niche for itself with easy-to-use "robot developer kits."

The kits come with an open software platform tailored to a range of common robotic functions. For example, roboticists can easily give their creations the ability to follow a target, listen to voice commands and maneuver around obstacles. None of these capabilities are revolutionary from a technology standpoint, but it's unusual that you would find them in one simple package.

The kits also come with common robotics hardware that connects easily with the software. The standard kit comes with infrared sensors, motors, a microphone and a video camera. Roboticists put all these pieces together with a souped-up erector set -- a collection of aluminum body pieces and sturdy wheels.

These kits aren't your run-of-the-mill construction sets, of course. At upwards of $1,000, they're not cheap toys. But they are a big step toward a new sort of robotics. In the near future, creating a new robot to clean your house or take care of your pets while you're away might be as simple as writing a BASIC program to balance your checkbook.

The Future: AIArtificial intelligence (AI) is arguably the most exciting field in robotics. It's certainly the most controversial: Everybody agrees that a robot can work in an assembly line, but there's no consensus on whether a robot can ever be intelligent.

Like the term "robot" itself, artificial intelligence is hard to define. Ultimate AI would be a recreation of the human thought process -- a man-made machine with our intellectual abilities. This would include the ability to learn just about anything, the ability to reason, the ability to use language and the ability to formulate original ideas. Roboticists are nowhere near achieving this level of artificial intelligence, but they have had made a lot of progress with more limited AI. Today's AI machines can replicate some specific elements of intellectual ability.

Computers can already solve problems in limited realms. The basic idea of AI problem-solving is very simple, though its execution is complicated. First, the AI robot or computer gathers facts about a situation through sensors or human input. The computer compares this information to stored data and decides what the information signifies. The computer runs through various possible actions and predicts which action will be most successful based on the collected information. Of course, the computer can only solve problems it's programmed to solve -- it doesn't have any generalized analytical ability. Chess computers are one example of this sort of machine.

Some modern robots also have the ability to learn in a limited capacity. Learning robots recognize if a certain action (moving its legs in a certain way, for instance) achieved a desired result (navigating an obstacle). The robot stores this information and attempts the successful action the next time it encounters the same situation. Again, modern computers

AI in the Movies The Matrix

AI

Blade Runner

2001: A Space Odyssey

Demon Seed

Bicentennial Man

Westworld

The Terminator

Short Circuit

Page 23: How lc ds work

can only do this in very limited situations. They can't absorb any sort of information like a human can. Some robots can learn by mimicking human actions. In Japan, roboticists have taught a robot to dance by demonstrating the moves themselves.

Some robots can interact socially. Kismet, a robot at M.I.T's Artificial Intelligence Lab, recognizes human body language and voice inflection and responds appropriately. Kismet's creators are interested in how humans and babies interact, based only on tone of speech and visual cue. This low-level interaction could be the foundation of a human-like learning system.

Kismet and other humanoid robots at the M.I.T. AI Lab operate using an unconventional control structure. Instead of directing every action using a central computer, the robots control lower-level actions with lower-level computers. The program's director, Rodney Brooks, believes this is a more accurate model of human intelligence. We do most things automatically; we don't decide to do them at the highest level of consciousness.

The real challenge of AI is to understand how natural intelligence works. Developing AI isn't like building an artificial heart -- scientists don't have a simple, concrete model to work from. We do know that the brain contains billions and billions of neurons, and that we think and learn by establishing electrical connections between different neurons. But we don't know exactly how all of these connections add up to higher reasoning, or even low-level operations. The complex circuitry seems incomprehensible.

Because of this, AI research is largely theoretical. Scientists hypothesize on how and why we learn and think, and they experiment with their ideas using robots. Brooks and his team focus on humanoid robots because they feel that being able to experience the world like a human is essential to developing human-like intelligence. It also makes it easier for people to interact with the robots, which potentially makes it easier for the robot to learn.

Just as physical robotic design is a handy tool for understanding animal and human anatomy, AI research is useful for understanding how natural intelligence works. For some roboticists, this insight is the ultimate goal of designing robots. Others envision a world where we live side by side with intelligent machines and use a variety of lesser robots for manual labor, health care and communication. A number of robotics experts predict that robotic evolution will ultimately turn us into cyborgs -- humans integrated with machines. Conceivably, people in the future could load their minds into a sturdy robot and live for thousands of years!

In any case, robots will certainly play a larger role in our daily lives in the future. In the coming decades, robots will gradually move out of the industrial and scientific worlds and into daily life, in the same way that computers spread to the home in the 1980s.

The best way to understand robots is to look at specific designs. The links on the next page will show you a variety of robot projects around the world