How Do You Replace Your Circuit Board Easily?

Most modern spas are equipped with circuit boards present inside the equipment area. They are commonly known as the spa packs. The spa pack works like the brain of your spa. If you are looking to replace the circuit board, you should ensure that you replace it with right one.

Many circuit boards look the same; but they may be different. Take a look at important tips that will make sure that your new circuit board will work perfectly with the existing system.

Balboa GS501 Ciruit Board

Note – Many circuit boards look alike; but may not work in your spa. Therefore, you shouldn’t order a replacement circuit board as per the appearance. To identify a circuit board, you should check the part number and the chip number.

Do you really want to replace your circuit board? If you want to know whether you should replace your circuit board, it depends on what’s exactly wrong with your spa. Different possibilities may exist that causes malfunctioning of the system. Hence, you should identify the right problem so that you don’t need to waste money for parts replacement that doesn’t need to be replaced. If you want to get started, please remove the cover of the spa pack.

How do you troubleshoot your circuit board?

•Your circuit board may not work; if the important equipment like the pump, blower, heater, etc, doesn’t receive power.•Check the voltage on the circuit board that will let you know the place where you lose power.•Want to look at the board on your own? Please check for the melted components or burn marks, if there’s any.•If you’re not sure about the issues with your circuit board, you should seek professional help from a spa technician.

Replacing Balboa Circuit Boards –

There are so many companies available that manufacture and supply hot tub circuit boards and each type may display the replacement information you require in a slightly different way. Out of all types, Balboa circuit boards are commonly used systems in the most spa packs. Most spa manufacturers have been using the Balboa spa packs over the years. When it comes to replacing Balboa circuit boards, you should know the chip number. Go through the below details and know how to find the chip number easily.

•Generally, a chip number is alphanumeric which you’ll find on the white label present on the black chip on the board.

•Remember, the chip number ends in a revision number like “R1A”, “R1B”, etc.

•However, the chip number defines the software used between the circuit board and topside control. This number will make sure that the topside control and circuit board work together.

Still have questions regarding the replacement or installation of Balboa circuit boards? If yes, then you shouldn’t hesitate to contact Northern Lights Cedar Tubs Direct as soon as possible at +1-800-759-8990.

Address:

Cedar Tubs Direct

305 Mckay Ave. Unit #20

Winnipeg, Manitoba, Canada, R2G 0N5

Ph: 800 759 8990

Website: https://www.cedartubsdirect.com/

Contact Us