houselink - bintracbintrac.com/assets/uploads/2020/02/houselink-interfaces... · 2020-02-26 ·...
TRANSCRIPT
HouseLINK™
Communications Interface
Connect your BinTrac® Bin Weighing System to any house control using HouseLINK™ interfaces.
LIG
HTN
ING
WARRAN
TY
For details see reverse u
HouseLINK
HouseLINK is a hardware device designed to transmit data from the BinTrac bin weighing system to any third-party house control system.
HouseLINK Features: u Allows for isolation of bin scales
from the house control
u Ability to see bin weights on both the house control and bin
u Patented, industry-leading lightning protection
Works with the following controls:* u Rotem® Platinum
u Chore-Tronics® II and III
u Big Dutchman®
u PMSI
u AEI
u MTech-Systems
u Maximus-Systems
u Control Tech- Fusion
u Phason – Autoflex Connect
u SKOV
Interface Support: u Analog – 0-10 VDC
u Digital – Pulse Output
u Proportional – 2 or 3 mV/V
u Serial – RS232 or RS485
u Ethernet
u CANbus
HouseLink™ Communications Interface
Analog (HL-10A)
u Supplies a 0-10 VDC analog voltage output proportional to the weight.
u Use with PLC and analog input card.
Digital (HL- 10D)
u Supplies configurable pulsed output as weight is removed from the bin.
u Simulates a dump scale.
u Use with Chore-Tronics® II or III controls.
Proportional (HL- 10P)
u Supplies a 2-3 mV/V output proportional to the bin weight.
u Simulates analog load cells.
u Use with Rotem® Platinum and Big Dutchman® controls.
Proportional (HL- 10PLV)
u Supplies a 2-3 mV/V output proportional to the bin weight.
u Simulates analog load cells.
u Use with Maximus controls.
Serial (HL-10S)
u Supplies a RS232 or RS485 serial output proportional to the bin weight.
u Supports broadcast or polled protocols via ASCII or MODBUS data formats.
u Use with AEI, PMSI, MTech-Systems, Phason or PLC.
Ethernet (HL-10E)
u Supplies an Ethernet data connection.
u Supports MODBUS TCP for communications with a PLC or other device.
u Built-in web server.
u Use with Control Tech or PLC.
CANbus (HL-10C)
u Supplies CANbus data connection.
u Supports ISO 11898 standards, and CAN open architecture.
u Use with Big Dutchman and SKOV controllers.
AVAILABLE INTERFACES
bintrac.com 1-877-246-8722
11/2019
*Rotem® is a registered trademark of Rotem Computerized Controllers Ltd., Chore-Tronics® is a registered trademark of CTB, Inc. and Big Dutchman® is a registered trademark of Big Dutchman, Inc., in the United States and, perhaps, other countries. Rotem Computerized Controllers Ltd., CTB, Inc., Big Dutchman, Inc., Poultry Management Systems, Inc. (PMSI), AEI-LLC and MTech-Systems USA, Inc. are not associated with Herdstar, LLC and do not approve, sponsor, or endorse Herdstar, LLC’s products.