hotrot composter kingsnorth, uk - ccl · waste management specialists hotrot organic solutions...

1
Waste management specialists HotRot Organic Solutions completed the construction of a new composting facility in Kingsnorth, Kent. The installation consists of two HotRot in-vessel composting (IVC) units for the treatment of sewage washings and the grits and screenings from sewage treatment works (STW) in the Thames and Southern Water regions. The composting units were constructed from precast segments which were assembled and then post-tensioned. CCL provided design advice for the post-tensioning, supplied the stressing system and carried out installation. Unbonded strand was fed through the cored sections and fixed at each end of the vessel using 12.9 mm barrels, wedges and specially designed anchor plates. Once the stressing was complete the strands were cut and the voids filled. HOTROT COMPOSTER KINGSNORTH, UK CCL Client: CFS Ltd. Main Contractor: HotRot Project Date: March 2011 Repair and Strengthening - CCL (GB) Ltd. T: +44 (0)113 270 1221 E: [email protected] W: www.cclint.com

Upload: others

Post on 24-Aug-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: HOTROT COMPOSTER KINGSNORTH, UK - CCL · Waste management specialists HotRot Organic Solutions completed the construction of a new composting facility in Kingsnorth, Kent. The installation

Waste management specialists HotRot Organic Solutions completed the construction of a new composting facility in Kingsnorth, Kent.The installation consists of two HotRot in-vessel composting (IVC) units for the treatment of sewage washings and the grits and screenings from sewage treatment works (STW) in the Thames and Southern Water regions.

The composting units were constructed from precast segments which were assembled and then post-tensioned. CCL provided design advice for the post-tensioning, supplied the stressing system and carried out installation.

Unbonded strand was fed through the cored sections and fixed at each end of the vessel using 12.9 mm barrels, wedges and specially designed anchor plates.

Once the stressing was complete the strands were cut and the voids filled.

HOTROTCOMPOSTERKINGSNORTH, UKCCL Client: CFS Ltd.Main Contractor: HotRot Project Date: March 2011

Repair and Strengthening - CCL (GB) Ltd.T: +44 (0)113 270 1221 E: [email protected] W: www.cclint.com