ilOOVERCVm*.The Easy to UseDeep Cleanerwith automatic tool conversion

Owner’sManualENGLISH + pp. 1-13ESPAfiOL + pig. 14-21FRANGAlS + p. 22-29

Review this manual before operating deep cleaner

Ultra Models Plus Models Deluxe Models

These models are included in this manual

TM Deep Cleaner cleans carpet fibershot tap water and cleaning solution.

Fill in and RetainThis HOOVER deep cleaner isdesigned for deep cleaning carpet,rugs, carpeted stairs and upholstery.The model and serial numbers arelocated on the data label on the backof the handle.

For your personal records, pleaseenter the COMPLETE model and serialnumbers in the spaces provided andretain this information.

Your deep cleaner is model

and has serial number

It is suggested that you attach yoursales receipt to this owner s manual.

Verification of date of purchase maybe required for warranty service ofyour Hoover product.

indexImportant safeguards . . . . . . . . . . 2Unpacking deep cleaner. . . . . . . . .3Assembling deep cleaner . . . . . .4-5Deep cleaner description . . . . . . . .6General operation . . . . . . . . . . . .6-9

Filling the clean solution tank. 7-8Emptying the recovery tank . . 8-9Agitator speed selector . . . . . . . 7Brush Indicator . . . . . . . . . . . . . .7

How to useBefore you begin . . . . . . . . . . . .9After cleaning . . . . . . . . . . . . 9-10Cleaning carpet . . . . . . . . . . . . 10Picking up spills . . . . . . . . . . . . 10Cleaning bare floors . . . . . . lo-11Usingthetools . . . . . . . . . . . . .11

Cleaning carpeted stairs . . 11-12Cleaning upholstery . . . . . . . 12

Ifyouhaveaproblem . . . . . . . . .13Lubrication . . . . . . . . . . . . . . . . . .12Service . . . . . . . . . . . . . . . . . . . . .12Storage . . . . . . . . . . . . . . . . . . . . .12Warranty . . . . . . . . . . . . . . . . . . . .13

I ~ ----------

When using an electrical appliance, always follow basicprecaution, including the following:

READ ALL INSTRUCTIONS BEFORE USING APPLIANCE.

WARNING: shock,orinjury:To reduce the risk of fire, electric

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

Use indoors only.Use Only on surfaces moistened by the cleaning process or small spills. Donot immerse product.Connect to a properly grounded outlet only. See “Grounding Instructions”.Do not clean over floor electrical outlets.Do not use without tanks in place.Use extra care when cleaning on stairs. Do not place deep cleaner on stairs.Use deep cleaner only for its intended use as described in the instructions.Use only attachments recommended by The Hoover Company; others maycause hazards.The use of an extension cord Is not recommended. If an extension cord isabsolutely necessary, use at least a 16 gauge 3-wire cord which has a 3-pronggrounding type plug and a 3-pole receptacle that accepts the machine plug.Unplug deep cleaner when not in use.Turn off all controls before unplugging.Always disconnect cord from electrical outlet before servicing the deep cleaner.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.Never handle plug or appliance with wet hands.Do not pull or carry by cord, use cord as a handle, close door on cord or pullcord around sharp edges or corners. Do not run appliance over cord. Keepcord away from heated surfaces.Do not use with damaged cord or plug. If appliance Is not working as it should,has been dropped, damaged, left outdoors, or dropped Into water, take it to aHoover Factory Service Center or Authorized Hoover Warranty Service Dealer.Close supervision is necessary when any appliance is used by or nearchildren. Do not allow deep cleaner to be used as a toy or to run unattended atany time.Do not point tools toward people or pets.Use only commercially available floor cleaners Intended for machineapplication. Do not use any type of wax with deep cleaner.To assist In reducing drying time, be certain the area Is well ventilated whenusing detergents and other cleaners with this machine.Keep detergents and other cleaners out of children’s reach.Do not use to pick up flammable or combustible liquids such as gasoline oruse In areas where they may be present.Do not pick up chlorine bleach, drain cleaner, gasoline or any other toxicmaterial with this appliance.Do not pick up anything that is burning or smoking, such as cigarettes,matches, or hot ashes.Avoid picking up hard, sharp objects with the deep cleaner. They may damagethe machine.Keep hair, loose clothing, fingers, feet and all parts of body away fromopenlngs and moving parts.Do not put any object Into openings. Do not use with any opening blocked;keep free of dust, lint, hair, and anything that may reduce air flow.To help prevent matting and resoiling, avoid contact with carpets until they aredry. Keep children and pets away from carpets until they are COmPletelY dry.Store in a dry place. Do not expose machine to freezing temPeratUreS.

Save@ @@

0 1993,1996,1997 The Hoover Companywww.hoovercompany.com

2

,.

GroundingInstructions

0I 1

ar-l0

0I 18This appliance must be grounded. If itshould malfunction or breakdown,grounding provides a path of least resis-tance for electrical current to reduce therisk of electric shock. This appliance isequipped with a cord having an equip-ment-grounding conductor (C) andgrounding plug (A). The plug must beplugged into an appropriate outlet (B)that is properly installed and grounded inaccordance with all local codes andordinances.

F

G

E

IIaFl0I I

DANGER-Improper connection of the equipment-grounding conductor can result in therisk of electric shock. Check with a qual-ified electrician or service person if youare in doubt as to whether the outlet isproperly grounded. Do not modify theplug provided with the appliance - if itwill not fit the outlet, have a proper outletinstalled by a qualified electrician. Thisappliance is for use on a nominal 120volt circuit and has a grounding plugthat looks like the plug illustrated insketch (A).

A temporary adapter (D) may be used toconnect this plug to a 2-pole receptacle(E) if a properly grounded outlet is notavailable. The temporary adapter shouldbe used only until a properly groundedoutlet (B) can be installed by a qualifiedelectrician. The green colored rigid ear,lug, or the like (F) extending from theadapter must be connected to a perma-,nent ground (G) such as a properlygrounded outlet box cover. Wheneverthe adapter is used, it must be held inplace by a metal screw. NOTE: InCanada, the use of a temporary adapteris not permitted by the CanadianElectrical Code.

A B

q Unpack deep cleaner from the car-ton and identify the parts shown.

Remove and dispose of the packing.

A. Deep cleanerB. Upper handle OR

Upper handle for stair/upholstery nozzle storage*OR Upper handle with powered hand tool**

c. Bolts (2)D. Nuts (3 - one extra included)E. Carpet/Upholstery DetergentF. Bare Floor CleanerG. PreCleaner (some models)H. Bare floor attachment

Contained in carton with hose:I. H o s eJ. Stair/upholstery nozzle OR car cleaning tool*

(positioned on rack); Stair/upholstery nozzle notpositioned on rack*

K. Hose rack and screw (taped on rack under nozzle)L. Clip for hose

*Included with Plus models

**Included with Ultra models

3

The assembled cleaner will look like thisdrawing (Ultra model shown).

Attach upper handleq Remove clean solution tank (upper

tank) from deep cleaner.

EII With cord hook (A) to back of deepcleaner, push upper handle down onto

lower handle. Push bolts into holes onfront of handle. If bolts will not gothrough hole easily handle is not pushedcompletely down.

q Place nuts in recessed areas on’ back of handle. Hold each nut in

place while tightening each bolt securelywith a Phillips screw driver.

Only two nuts are needed on this model.The extra nut is not required but hasbeen provided for your convenience.

B

la When handle sections are completely together, squeeze trigger (6) on

upper handle to snap trigger rod Inplace.

I / I

EI. Replace clean solution tank (upper

tank) by positioning bottom first.Press on tank handle to snap top oftank into place.

El Press cord into cord clip on back ofhandle. Pull cord tight.

Attach hose clip*

Pivot clip and push other tab into

0Push tab on side of clip into hole on

q hole at back of handle to lock into

’ side of handle. place.

4

Attach hose rackq, Remove tool and taped screw from

rack.Insert projections on rack into slots onback of cleaner.

q Slide rack down into place. Insertscrew at (D) and tighten with a

Phillips screwdriver.

Storing hose & toolsq Store hose on rack by first position-

ing hose in front section of clip.

q Then continue wrapping hose asshown snapping end of hose con-

nectar into clip.q, Position tool in holder at base of

cleaner and snap it into place asshown at arrow.

q Slide bare floor attachment intoholder as shown.

For Plus* orUltra** models

q The powered hand tool** is shipped. in a plastic bag for protection.

Remove the bag before using the toolby first opening tool door.

q To remove tool** (A), pull it downand outward.

To reposition the tool, reverse this proce-dure.To store stair/upholstery nozzle* (B),open tool door, place nozzle in bracketand fit it securely into position. Toremove, reverse this procedure.

How to reattach toolcover

q: The tool cover is designed with abreak-away feature which allows it

to snap free if it is pushed open too far.

To reattach, align hinges of cover withslots on sides of tool storage area.

Push cover down to secure in place.

The assembled deep cleaner will look like the drawing.

5

16

18

.q1. Hand grip2. Solution trigger: press to

release clean solution.3. Cord clip: place cord in clip

to keep it out of the waywhen using cleaner

4. Hose5. Hose holders: wrap hose

around holders for storage.6. Cord hooks: wrap cord

around hooks for storage.The top hook can be rotatedright or left for quick andeasy cord release.

7. Stair/upholstery nozzle* ORPowered hand tool**

8. Carrying handle9. Clean solution tank handle10. Clean solution tank cap/

measuring cup11. Clean solution tank: holds

cleaning solution.12. Recovery tank handle:

raise handle to unlock tankfor removal; lower handle forward to lock tank into posi-tion.

13. Recovery tank: holds dirtysolution.

14. Hood15. Agitator speed selector:

slide selector to set brushspeed on HI, LO, or OFF.

16. Brush Indicator: spinswhen brushes are rotating.

17. Nozzle.18. Cleaning mode indicator:

choose either floor or tools19. ON/OFF pedal20. Handle release pedal: step

on pedal to lower handle tooperating (floor) position;

21. Stair/upholstery nozzle ORCar cleaning tool*

22. Bare floor attachment

*Included with Plus models

**Included with Ultra models

This deep cleaner is intendedfor household use.

Operate deep cleaner only at voltagespecified on data plate on back ofcleaner. Plug deep cleaner Into a prop-erly grounded outlet.

ON/OFF pedal &Handle release pedal

q, Step on pedal (A) to turn deepcleaner on. Step on pedal again to

turn deep cleaner off.

Step on pedal (B) to lower handle tooperating position. Handle does not lockinto a single position but “floats” to allowconvenient operation.

6

Cleaning mode indicatorq Indicator will show a green window

next to FLOOR (C) when handle isin the operating position for cleaningcarpet rugs and bare floors.

Indicator will show a green window nextto TOOL (D) when handle is in theupright position for tool use on stairsupholstery etc.

Deep cleaner automatically divert suc-tion from FLOOR toTOOL when han-dle is raised from the operating to theupright position.

To transport

q To move your deep cleaner fromroom to room put handle in upright

and locked position tilt deep cleanerback on wheels and push forward.

q The deep cleaner may also be lift-ed by placing a hand under the

upper clean solution tank handle asshown. El’ When the recovery tank (lower tank) is

full the automatic shutoff mechanismwill shut off the deep cleaner suction (suc-tion will be noticeably reduced).

At that time the red float disk will rise tothe top of the recovery tank lid (E). Thedeep cleaner will no longer pick up dirtysolution and the motor sound willbecome noticeably higher in pitch.

When this happens turn deep cleaneroff and empty recovery tank beforecontinuing use.

Check clean solution tank also; it mayneed to be refilled.

Agitator Speed selector

q Your ‘SteamVac’ deep cleaner hasthree agitator brush settings.

HI - for normal cleaning of carpet andbare floorsLO - for gentle cleaning of carpets andbare floorsOFF - for cleaning carpets and barefloors when brushing is not desired.(Such as when picking up liquid spills.See page 10.)Slide selector button to the desired set-ting before cleaning.

Brush indicator

a. The brush indicator will spin (F)

when the deep cleaner is turnedON and the brushes are rotating.If the indicator does not spin and thepattern is visible (G) when the deepcleaner is turned ON, the brushes arenot rotating.There are three reasons why the brushesmay not be rotating:

1. Brush speed selector set on OFF (seeprevious section).

2. Handle in upright position (see“Cleaning mode indicator,” p. 6).

3. Brush indicator screen dirty.

q To clean screen (H), turn deep clean-er off and disconnect from electrical

outlet.

Remove clear cover and wipe off screenwith a damp cloth. Snap cover back intoposition.

The tanksClean solution tank(upper tank)The clean solution tank holds the clean-ing solution that is to be dispersed ontothe surface to be cleaned.

How to fillDisconnect deep cleaner fromelectrical outlet.

q: Place deep cleaner handle in theupright, locked position.

To remove tank, press down on handleand pull forward.Carry tank to a sink.

Continued +7

.q Rotate tank cap counterclockwiseand lift up to remove cap.

Turn cap (A) upside down to serveas a measuring cup.

Do not use Bare Floor Cleaner on carpet orupholstery. Do not use any type of waxwith your ‘SteamVac’ deep cleaner.

NOTE: Use only HOOVER detergents.They are specially formulated for usewith your ‘SteamVac’ deep cleaner.

For heavy traffic areas:Pre-treat with HOOVER PreCleaner Spray.If you do not have access to the PreCleaner Spray, double the amountof HOOVER Detergent (use 2 capfuls or 10 ounces per 1 gallon tank).

Using cap, measure detergent followingthe chart below.

For carpet, carpeted stairs and uphol-stery:

Fill cap to fill line (5 ounces) with HOOVERCarpetiUpholstery DetergentFor bare floors:

Fill cap to fill line (5 ounces) with HOOVERBare Floor Cleaner

CAUTION: Detergents containAnionic and Nonionic Surfactants.Avoid contact with eyes and skin. Incase of contact with eyes, flush withcold water for 15 minutes. In case ofcontact with skin, wash with water. IfIrritation persists, call a physician.For Medical Information (U.S.) calll-800-752-7889.

q Pour detergent into tank. Fill tankto fill line (B) (1 gallon) with hot

If rubber ring (C) on cap hasbecome dislodged, reposition it

tap water. with uneven side against ledge (D) asTo assure proper performance, use only shown.HOOVER cleaning detergent.

q Replace cap. Rotate cap clock-wise until it locks In place. Cap

must be locked In place for properperformance and to prevent leaking.

q, Position bottom of tank into unitand press on tank handle to snap

tank into place.

Recovery tank(lower tank)The recovery tank holds the dirty solu-tion that is picked up from the carpet.

When the recovery tank is full, the auto-matic shut-off will engage (see page 7)and the tank must be emptied.

How to emptyTurn deep cleaner off and disconnectfrom electrical outlet.To prevent possible leaking, removeclean solution tank (Fig.28) by pressingdown on tank handle and pulling for-ward; set tank aside (do not set tankon furniture).Step on handle release pedal (Fig. 20)and lower handle until it rests on thefloor.

8

q Raise handle to carrying position(straight up) to unlock tank from

base of deep cleaner. Lift tank fromdeep cleaner and carry it to a sink ordrain.

q, To remove tank lid, lower handlecompletely toward back of tank

and lift off lid.

Empty the tank and reposition the lid.

Before you begincleaninga. Vacuum thoroughly - For carpet, usea vacuum cleaner with an agitator forbest results. Vacuum upholstery with avacuum cleaner with cleaning toolattachments. Use a crevice tool to reachinto tufts and folds. Do not use the‘SteamVac’ deep cleaner as a dry vac-uum cleaner.b. For upholstery, check cleaningcode - Use your HOOVER ‘SteamVac’deep cleaner only if the upholstery fab-ric is marked with a “W” (for “wet” clean)or “S/w” (for “solvent/dry” or “wet”clean). Do not clean fabric marked “S”(“solvent/dry” clean only). If yourupholstery does not have a code, seekprofessional assistance.

c.Test for colorfastness - Mix detergentand water according to the instructionsunder “Fill clean solution tank” on pages 7

and 8. Wet a white absorbent cloth with thesolution. In a small, hidden area, gently rubthe surface with the dampened cloth. Wait tenminutes and check for color removal or bleedwith white paper towel or cloth. If surface hasmore than one color, check all colors.

d. When cleaning entire floor, movefurniture out of area to be cleaned(may not be necessary if only high trafficareas are to be cleaned). For furnituretoo heavy to move, place aluminum foilor wax paper under legs. This will pre-vent wood finishes from staining carpet.Pin up furniture skirts and draperies.

e. Pretreat spots and heavy trafficareas with HOOVER@ PreCleaner*-Test PreCleaner for colorfastness by firstspraying it on a hidden area; wait tenminutes and blot with white paper towelsor cloth.If no color change is visible, sprayPreCleaner onto spots and traffic areas. Waitat least ten minutes. Use your ‘SteamVac’deep cleaner to pick up PreCleaner andspot. Repeat until spot is removed; carefuliyscrub with a household scrub brush if nec-essary.

For full suction, it is important thatthe recovery tank lid is properlysecured before cleaning.

Raise tank handle to carrying position toplace it into base of cleaner. Move han-dle completely forward to lock tank intoplace (see Fig. 35).

Raise handle of deep cleaner to uprightposition and reposition upper cleansolution tank.

After cleaninga. Allow carpet or upholstery to dry. Tohelp prevent matting and resoiling thecarpet, keep children and pets awayfrom surface until it is completely dry. Ifit is necessary to walk on damp car-pet, place towels or white cloths on thetraffic areas.If furniture must be replaced before thecarpet is dry, use plastic or aluminumfoil pads under legs of furniture so metalslides or wood finishes will not stain thecarpet.b. If desired, the carpet may be rinsed.Rinsing is not necessary for cleaning,but it may Improve the surface’s appear-ance after it is dry.If rinsing is desired, be careful not toover-wet the carpet or upholstery.

Allow time for carpet or upholstery todry completely between cleaning andrinsing. To rinse, follow the same proce-dure for cleaning only using hot tapwater with no detergent in the upperclean solution tank.c. Empty tanks, rinse with clear waterand let air dry. Rinse the solution tankcap and recovery tank lid and let air dry.

Do not saturate carpet or upholstery withPreCleaner.If you do not have access to thePreCleaner Spray, double the amountof HOOVER Detergent (use 2 capfulsor 10 oz. per 1 gallon) in the cleansolution tank.*Available at additional cost if not includedwith your model. No cleaning solutionremoves all stains from all carpets. Stainremoval varies with the type of spill, timeelapsed before removal, carpet material,and carpet type.

f.To prevent staining, use plastic or alu-minum foil to protect wood or metal sur-faces from possible water spray.

g. To avoid wetting and possible damageto wood floors underneath area rugs/car-pet, either move area rugs/ carpet to a non-wood bare floor surface or place waterproofmaterial (e.g. plastic) underneath thembefore cleaning.

See pages 1 O-l 4 for instructions on variouscleaning tasks.

q d. Remove debris from recoverytank filter and rinse with cleanwater.

Note: If the filter must be removed forcleaning, it is easier to replace if the fil-ter is wet.

e. If desired, vacuum thoroughly aftercarpet has completely dried. This willhelp reduce any shading left by thedeep cleaner’s brushes.

To clean nozzleIf lint or other debris becomes lodged innozzle, do not attempt to removenozzle cover.Pour one to two cups of clear water on anon-carpeted floor. Do not pour wateronto a wood floor.Pick up water with your ‘SteamVac’ deepcleaner. Repeat as necessary untildebris is flushed out of nozzle.

Continued + 9

To clean the outside of the machine,wipe off dirt with a cloth dampened inwarm water and mild detergent. Do notuse solvent or petroleum based prod-ucts to clean the machine.

Read “Before you begin cleaning”instructions on page 9.Fill clean solution tank (upper tank) withHOOVER Carpet/Upholstery Detergentaccording to instructions on pages 7and 8.

Move speed selector to LO for gentlecleaning or Hi for normal cleaning.

Dry hands and plug cord into a properlygrounded outlet.

Do not clean over floor electrical out-lets.To avoid walking on damp carpet, startat the end of the room farthest from thedoor or path to sink where tanks will beemptied and filled .

Step on handle release pedal and lowerhandle to operating position; turn deepcleaner ON.

Your HOOVER SteamVac deep cleanermay also be used to pick up small liq-

use only the floor nozzle with the barefloor attachment in place and speedselector in the OFF position (this will helpprevent spreading the spill).If a spot is left, the stair/upholstery nozzle is

uid spills (1 gallon or less, never toexceed l/4 inch in depth) on carpet,upholstery, or bare floors.

For best results, pick up spills immedi-ately by placing the stair/upholsterynozzle just above the spill and suctionup any residue on top of the carpet. Ifthe spill remains, place either the stair/upholstery nozzle or floor nozzle wirhbrushes turned Off in front of the spill,pull the nozzle very slowly over the spillinitially with suction only. Repeat with sprayand suction.When picking up spills on bare floors,

generally more effective for removing it.Although no cleaning solution can com-pletely remove all spots, they can be treat-ed by following the instructions provided bythe manufacturer of the carpet, upholstery,or bare floor surface being cleaned.Do not use the SteamVac deep cleanerto pick up flammable or combustible liq-uids or chemicals.When finished, follow “After cleaning”instructions on pages 410.

How to attach bare floorattachmentDisconnect deep cleaner from electri-cal outlet.To prevent possible leaking, removeclean solution tank and recovery tankbefore positioning bare attachment.Refer to Fig. 28 to remove clean solu-tion tank. Set tank aside (do not settank on furniture).

Refer to Fig. 35 to remove recoverytank.With handle in upright position, tiltcleaner back so that handle rests onthe floor.

.qWith foam strip (A) (located underthe netting) in position as shown, q, , Push attachment against nozzle while

rotating attachment downward untilplace attachment on front of nozzle (B).Make sure arrow on end of attachmentpoints in the direction as shown.

q: Squeeze trigger to release cleaningsolution and slowly push deep

cleaner forward (equals one wet stroke).

Continue to squeeze trigger and slowlypull deep cleaner back toward you (sec-ond wet stroke). Release trigger andslowly push deep cleaner forward overarea just sprayed with solution (drystroke). Then slowly pull deep cleanerbacktoward you without squeezing trig-ger (dry stroke).

Overlap strokes by 1 inch to help pre-

both ends snap into place.

(Note: Some force may be required torotate and snap attachment into place.)

vent streaking.Keep nozzle flat on floor for both for-ward and reverse strokes.

For heavily soiled areas, repeat. Toavoid saturating carpet, do not usemore than 4 wet strokes over onearea. Always end with dry strokes.It is best to alternate wet and drystrokes as described above.

For best cleaning results and to aid infaster drying of carpet, end with moredry strokes. (Continue using dry strokesuntil little water is visible passingthrough the recovery tank lid.)Empty recovery tank when the motorsound becomes higher pitched andthere is a loss in suction (see“Automatic shut-off”, page 7)

When finished cleaning, follow “Aftercleaning” instructions on pages 9-10.

Return deep cleaner to upright position.Lower handle and replace recoverytank.

Raise handle to upright position andreposition clean solution tank.

To clean floorRead Before you begin cleaninginstructions on page 9.Do not use the SteamVac deep clean-er on hardwood floors.Fill clean solution tank with HOOVERBare Floor Cleaner according to instruc-tions on pages 7 and 8.Do not use any type of wax with yourSteamVac deep cleaner.Move speed selector to the Lo or HIposition for scrubbing or OFF ifscrubbing is not desired.

IO

c

Dry hands and plug deep cleaner intoa properly grounded outlet.

Step on handle release pedal and lowerhandle to operating position; turn deepcleaner ON.

To release solution, press trigger. Slowlymove deep cleaner forward and back-ward over area to be cleaned.

To pfck up dirty solution, release triggerand slowly move deep cleaner overarea where solution has just been dis-persed. Use both forward and reversestrokes.

Empty recovery tank when the motorsound becomes higher pitched andthere is a loss in suction (see“Automatic shut-off”, page 7)

When finished cleaning, follow “Aftercleaning” instructions on pages 9-10.

Remove attachment from nozzle andrinse in clear water. Do not removeplastic screen or foam from attach-ment.

The powered hand tool (Ultra models)has rotating brushes for extra scrubbingaction on small carpet areas, carpetedstairs and upholstery.The stair/upholstery nozzle has a built-inbrush to help provide the scrubbingaction some spots may need forremoval.The car cleaning tool (Plus models) canbe used for carpet and upholstery invehicles.

How to attach toolDisconnect deep cleaner from electri-cal outlet.Place handle in upright position andremove hose from rack.

q, Connect powered hand tool (A) orstair/upholstery nozzle or carcleaning tool (B) to end of hose by

sliding it onto connector until the tab (C)locks it securely.

Using your thumb, push forward andup on the latch (D) to remove tool asshown.

Follow the instructions on pages 11-12for the appropriate cleaning task.

After using tool1. Follow steps a and b for “After clean-ing” on page 9.

qA 2. Rinse tool and hose by filling sinkwith a small amount of water. Turn

deep cleaner ON and pickup the waterwith the tool.

q1 3. Drain hose by turning deepcleaner ON and holding end of

hose up for several seconds. Do notpress trigger.

4. Disconnect deep cleaner from electri-cal outlet.

5. Drain solution tube (located insidehose) by pointing end of hose in sinkand pressing trigger.

6. Proceed with steps c, d, and e, for“After cleaning” on page 9.

Read “Before you begin cleaning”Instructions on page 9.

Place handle in upright position.Agitator brushes will not rotate whilehandle Is in upright position.Fill clean solution tank with HOOVERCarpet/Upholstery Detergent accordingto instructions on pages 7 and 8. Attachtool to end of hose.

Hose length may require that machinebe placed at the top of the stairs toclean upper half of stairway and at bot-tom of stairs to clean lower half.

To prevent machine from falling, useextra cautipn when cleaning on stairs.Do not place deep cleaner on stairs.

Do not point tools toward people orpets. Dry hands and plug deep cleanerinto a properly grounded outlet.

Turn deep cleaner ON.

q Pre-spray the carpeted stair by’ ’ holding the tool (A) or(B) about

one inch above the carpet and push itforward while pressing the trigger(equals one wet stroke).

Position tool against the riser and slightlypress it into carpet pile. Press the triggerand pull the tool slowly over the carpet(second wet stroke). Release trigger at endof stroke.

Continued + 11

Lift tool, and position it against riser.Pull tool slowly over carpet without

pressing trigger (dry stroke).

It is best to alternate wet and dry strokesas described above. End with more drystrokes to aid in faster drying of carpet.

Overlap strokes by l/2 inch to help pre-vent streaking.

To avoid saturating carpet, do not usemore than 4 wet strokes over any onearea. Always end with dry strokes.

If additional cleaning is necessary, waituntil the carpet is completely dry beforeusing the tool again.

Empty recovery tank when the motorsound becomes higher pitched andthere is a loss in suction (see “Automaticshut-off”, page 7)

When finished cleaning, follow “Aftercleaning” instructions on page 9 and“After using tool” instructions on page 11.

Read “Before you begin cleaning”Instructions on page 9.

Be sure to check the cleaning code onyour upholstery. Use your HOOVER‘SteamVac’ deep cleaner only onupholstery marked “w” or “W/S’.Place handle in upright position.Agitator brushes will not rotate whilehandle Is In upright position.Fill clean solution tank with HOOVERCarpet/Upholstery Detergent accordingto instructions on pages 7 and 8. Attachtool to end of hose.

Do not point tools toward people orpets.Dry hands and plug deep cleaner into aproperly grounded outlet.

Turn deep cleaner on.

q, . Gently press the tool (A) or (B) ontothe fabric. Press the trigger and

slowly pull the nozzle over the fabric.

Overlap strokes by l/2 inch to help pre-vent streaking.

Make additional strokes without pressingthe trigger to remove more moisture.

To clean in corners or creases, lift thetool one-half inch from the fabric andpress the solution trigger.

Vacuum up the solution with the toolwithout pressing the trigger.

q1 For heavily soiled areas, it may benecessary to repeat the cleaning

process. Make crisscrossing strokes tothe original pattern; overlap each pass.

Make no more than 2 passes with thesolution over any one area to preventover-wetting and damage to fabric.If additional cleaning is necessary, waituntil the upholstery is completely drybefore using the tool again.Empty recovery tank when the motorsound becomes higher pitched andthere is a loss in suction (see “Automaticshut-off”, page 7).

When finished cleaning, follow “Aftercleaning” instructions on page 9 and“After using tool” instructions on page 11.

12

StorageBefore storing:

l Empty solution tank and rinsethoroughly with clean water.

l Replace empty solution tank andturn deep cleaner ON. Squeezetrigger and push deep cleaner for-ward and back several times toexpel any solution remaining in thedeep cleaner’s system. (Do not usedeep cleaner on wood floors.)

l Empty recovery tank and rinsethoroughly with clean water.

Allow brushes and underside of deepcleaner to air dry thoroughly beforestoring deep cleaner on a carpeted orwood surface.

Do not store deep cleaner with a fullsolution tank In place.

LubricationThe motor Is equipped with bearingswhich contain sufficient lubrication forthe life of the motor. The addition of lubri-cant could cause damage. Do not addlubricant to motor bearings.

ServiceTo obtain approved HOOVER serviceand genuine HOOVER parts, locate thenearest Hoover Factory Service Centeror Authorized Hoover WarrantyService Dealer (Depot) by:

l checking the Yellow Pages underVacuum Cleaners - Household” OR

l checking the list of Factory ServiceCenters provided with this cleanerOR-

*calling l-800-944-9200 for anautomated referral of authorizedservice outlet locations (U.S. only)OR-

* checking the Service section of TheHoover Company on-line atwwwhoovercompanyeom

Do not send your cleaner to The HooverCompany in North Canton for service,this will only result in delay.

If further assistance Is needed, contactThe Hoover Company ConsumerResponse Center, North Canton, Ohio44720 Phone: 330-499-9499.

In Canada, contact Hoover Canada,Burlington, Ontario L7R 4A8,Phone: l-800-263-6376.

Always identify your cleaner by thecomplete model number when request-ing information or ordering parts. (Themodel number appears on the bottom ofthe cleaner.)

If you have aproblemIf a minor problem occurs, it usually canbe solved quite easily when the cause isfound by using the check list below.

Possible causePossible solution

l Not firmly plugged inl Plug unit in firmly

l No voltage In wall plugl Check fuse or breaker

l Blown fuse/tripped breakerl Replace fuse/reset breaker

Possible causePossible solution

l Recovery tank full/automaticshut off engaged

l Remove and empty recovery tank

l Blockage In tool on end of hosel Remove tool and clear blockage

l Recovery tank lid not oncorrectly

l Make sure lid is on securely

Possible causePossible solution

l Solution tank not firmly in placel Make sure tank is securely locked in

position

l Solution tank emptyl Refill tank according to instructions for

surface being cleanedl Recovery tank lid not on

correctlyl Make sure lid is firmly in place

Possible causePossible solution

l Indicator screen dirtyl Remove clear cover over indicator

and clean screen; replace cover

l Speed selector on OFFl Move speed selector to Low or Hi

Full One YearWarranty

(Domestic Use)

Your HOOVER@ appliance is warranted innormal household use, in accordance withthe Owner’s Manual against originaldefects in material and workmanship for aperiod of one full year from date of pur-chase. This warranty provides, at no costto you, all labor and parts to place thisappliance in correct operating conditionduring the warranted period. This warran-ty applies when the appliance is pur-chased in the United States including itsterritories and possessions, or in Canadaor from a U. S. Military Exchange.Appliances purchased elsewhere are cov-ered by a limited one year warranty whichcovers the cost of parts only. This warran-ty does not apply if the appliance is usedin a commercial or rental application.

Warranty service can only be obtained bypresenting the appliance to one of the fol-lowing authorized warranty service out-lets. Proof of purchase will be requiredbefore service is rendered.

1. Hoover Factory Service Centers.

2. Hoover Authorized WarrantyService Dealers (Depots).

For an automated referral of authorizedservice outlets in the U.S.A., phonel-800-944-9200 ORvisit The Hoover Company on-line atwww.hoovercompany.com

This warranty does not cover pick updelivery, or house calls; however, if youmail your appliance to a Hoover FactoryService Center for warranty service,transportation will be paid one way.

While this warranty gives you specificlegal rights, you may also have otherrights which vary from state to state.

If further assistance is needed, or if thereare questions concerning this warranty orthe availability of warranty service outlets,write or phone the Consumer ResponseCenter, The Hoover Company, 101 EastMaple St., North Canton, Ohio 44720.Phone l-330-499-9499.

In Canada, contact Hoover Canada,Burlington, Ontario L7R 4A8,l-800-263-6376.

13

nbras

iiI :

(

-ilI