honeywell aml series advanced manual line panel … aml.pdf · manual switches aml series advanced...

Manual Switches AML SeriesAdvanced Manual Line

Honeywell 1 Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada 17

IN FRONT OF THE PANELCoordinated, attractive appearance.AML features innovations designed by in-dustrial designers to achieve the best bal-ance of human factors and aesthetic ap-pearance. Operator height, bezel size,and the compatibility of square and rect-angular shapes blend with other compo-nents to harmonize your panel. There’sno visual clutter to distract from man/machine communication.

This comprehensive line of lighted andunlighted manual controls features:1 Pushbuttons for high and

intermediate frequency functions;1 Rocker and paddle switches, with 2 or

3 positions, for less frequent controlfunctions;

1 Plus lighted indicators andannunciators which complementAML’s universal appeal.

Various controls can be matched withtheir functions to accommodate the mostnatural and efficient habit pattern reflex.Keylock operated switches can be usedto assure ‘‘authorized personnel only’’access.

Display flexibility. AML offers a choice offive legend sizes, four button heights, fullor split section display, and illuminationby incandescent lamps, LED’s or neons.Colors are bright and uniform, providing astrong definition and good visibility. (Non-illuminated devices have the same attrac-tive colors.)

Color display options include:1 Transmitted color — color can be

distinguished whether lamp is On orOff.

1 Dead front — display appears black,until illumination causes legend andcolor to appear.

1 Projected color — white display isdiffused with color when illuminated.

BEHIND THE PANELAML’s simple, cost effective design pro-vides many behind-panel benefits for thedesigner and installer/user.

Simple to install. They snap in from thepanel front individually or in vertical orhorizontal strips; or in subpanel mountedstrips and matrices that can be pre-as-sembled and pre-wired to assure accu-rate alignment and efficient panel build-ing.

Electrical flexibility. Solid state switcheswith Hall effect integrated circuitsinterface directly with microprocessorsand other logic level devices. These IC’swere first applied in MICRO SWITCH solidstate keyboards. Today, many MICROSWITCH products incorporate the Halleffect technology to meet a wide range ofposition sensing and manual controlneeds.

Electronic control switches with gold orsilver contacts, and 1, 2, or 4 poles, willhandle up to 3 amps. Including an encod-ed version which generates different bi-nary coded outputs merely by changingcam-keyed buttons.

Power duty switches meet line discon-nect application needs with10-amp push-buttons and 15-amp paddle and rockerswitches.

Easy to wire. All AML devices presentsingle level termination. This means fas-ter, easier, neater, and more economicalwiring. And there is a choice of solder,quick-connect, push-on, and printed cir-cuit termination.

MATING RECEPTACLESThe .110 × .020 quick-connect/solder ter-minal (types 2 and 8) is designed for usewith receptacles that comply with the ULstandard for insertion and withdrawalforces. Maximum insertion force is 12 lbs.max., withdrawal force is 14 lbs. Thesereceptacles are supplied by: AMP Inc.,Berg, Augat, Hollingsworth, MALCO,Zierick, and others. Refer to Thomas Reg-ister or the Yellow Pages for the locationof your local supplier.

Manuals


18 Honeywell 1 Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada

FEATURES1 Complete selection of pushbutton,

rocker and paddle (toggle type)switches accommodates differentfunctions and promotes operatorefficiency.

1 Solid state, electronic, and powerduty control.

1 Full or split screen incandescentdisplay switches and indicatorsprovide vivid transmitted color,projected color (for neutral displaywhen unlit), and dead front (hiddencolor).

1 Wide-angle visibility LED and linevoltage neon display switches andindicators.

1 Annunciators back-lighted by LED’senable high density message display.

1 Keylock switches available forcontrolled access applications.

1 All AML terminations at the sameshallow depth (1.7 in. /43,1 mm) forconvenient wiring or PC boardtermination.

1 Snap-in surface mount or sub-panel(hidden bezel) mount with mountinghardware.

1 Pad printed legends with a clearpolyurethane overcoat available in achoice of five standard sizes.

1 Metric design for worldwide accept-ance.

1 UL recognized, CSA certification.1 Selected listings are certified by VDE

and CE. (For compliance status,contact the 800 number.)

MICRO SWITCH AML Advanced ManualLine combines functional flexibility withelectrical versatility to provide a broadrange of options to choose from.

EASY TO RELAMP

Relamping of T-1-3/4 incandescentAML91 lamps is accomplished from thefront of the panel without tools. (AML92T-1-3/4 LEDs can be added in the samemanner.)

FULL GUARD BEZEL OPTION

As an alternative to standard height be-zels (.06 in./1,5 mm), pushbutton switch-es can be furnished with full guard bezelsextending .19 in./5.0 mm from the mount-ing surface. In the free position, standardbuttons are flush with full guard bezels.

The raised bezel guards against acciden-tal operation by someone leaning againstor dropping something on a control con-sole.

High Intensity LEDs For Full-face AML Lighted DisplayAML92 Series

1 Full-face illumination for high visibility lighted colors.1 Advanced illumination technology combines high-intensity LED in standard

T-1-3/4 wedge base lamp package.1 Easy plug-in installation in AML lighted switches and indicators.1 Low operating temperature permits high density, continuous operation with

minimal heat build-up.

AML92 Series LEDs have a quad chip assembled in a T-1-3/4 wedge base lamppackage. They provide full-face illumination when used with lighted pushbutton,rocker and paddle switches, or indicators equipped with incandescent lampsockets. For ordering information, refer to page 58.


Honeywell 1 Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada 19

AML CHARACTERISTICSAML 10 Series AML 20 Series AML 30 Series AML 40 Series

Electrical/Mechnical Life* N/APushbuttons–Momentary 1,000,000 25,000 (silver)/

100,000 (gold)25,000 ---

Pushbuttons–Alternate 25,000 25,000 25,000 ---Rockers 25,000 25,000 25,000 ---Paddles 25,000 25,000 25,000 ---

Agency Ratings(May not apply to every

series division)UL File E53576 File E12252 File E12252 File E58932CSA File LR4442 File LR4442 File LR4442 File LR4442VDE None File 0630/10.78+ File 0630/10.78++ NoneCE Rating 1710 Rating 1710

No. 4275.5788 No. 4275.5788*95% Survival+ Exception: Four-Pole AML’s are not included in VDE Approval++ Exception: Only the 2-pole AML33 and AML34 are certified by VDE

AML ELECTRICAL DATA1 AML10 Series

Electrical Characteristics Absolute Maximum Rating4

Switching TimeMax.

OutputLeakage Voltage

Integrated Supply Output Current Rise Fall Supply Externally LoadsCircuit Current Voltage max. 10% to 90% to Voltage Applied to to Storage

Function (Max.) (Operated) (Released) 90% 10% (VS) Output Output Temperature

5 VDC 3.5 mA +.4 Volt 2.0 µA 1.0µsec 1.0µsec –.5 to +7.0 –.5 Volt min. 20 mA –40°C toSinking1 (Released) (Sinking (Sinking (Sinking VDC +15 Volts max. (Sinking) +65°C

6.5mA 8 mA) 8 mA) 8 mA) 0° to +65°C (Off condition) (–40° to(Operated — (+32° to +149°F)

no load) +149°F)

6-16 VDC 6.5 mA @ + .4 Volt 20 µA 1.5µsec 0.5µsec –1.2 to +20 +20 VDC max. in 40 mA –40°C toSinking2 6 VDC. (Sinking (Sinking (Sinking VDC Off condition only +65°C

10.0 mA @ 20mA 20 mA) 20 mA) –0.5 VDC min. in (–40° to16 VDC max.) Off or On +149°F)

(Plus load condition.current)3

4.5-24 VDCSinking

5 V7.0 mA

(Released)24 V

9.0 mA(Released)

14.0 mA(Operated-

no load)

+.4 Volt(Sinking10 mA)

10 µA 1.5 µ sec(Sinking10 mA)

0.5 µ sec(Sinking10 mA)

–30 to +30VDC

–0.5 Volt min. +24Volts max. (Off

condition)

20 mA(Sinking)

–40−C to+65°C (–40°to +149°F)

1 Over temperature range of 0° to +55°C (+32° to 2 Over temperature range of 0° to +55°C (+32° to 4 As with all solid state components, performance can be+131°F) and supply voltage of 4.5 to 5.5 VDC. +131°F) and supply voltage of 16 VDC. expected to deteriorate as rating limits are approached;

however, they will not be damaged unless the limits areexceeded.

3 At 24°C. (+75°F)

1 AML20 Series

Contacts Voltage Current Load Type

Silver 250 VAC 2 Amps 75% Power Factoror 125 VAC 3 Amps 75% Power Factor

Gold-plated Silver 24 VDC 2 Amps Resistive

Gold 125 VAC/DC 100 mA Resistive

1 AML30 Series

CurrentVoltage Pushbuttons Rockers or Paddles Load Type

125 VAC 10 amps 15 amps 60% power factor

250 VAC 10 amps 15 amps 60% power factor

Manuals

Honeywell Sensing and Control AML/MML Selection Guide

AML11 Solid state pushbutton switches

AML11 INCANDESCENT OR NON-LIGHTED DISPLAY ORDER GUIDE

HousingType

Standard BezelAML11B Square non-lightedAML11C Square 1 lamp ckt.AML11E Rect. non-lightedAML11F Rect. 1 lamp ckt.AML11G Rect. 2 lamp ckts.

Full Guard BezelAML11H Square non-lightedAML11J Square 1 lamp ckt.AML11K Rect. non-lightedAML11L Rect. 1 lamp ckt.AML11M Rect. 2 lamp ckts.

AML11B

BezelColor

BBlack

B

IncandescentLamp Type

ANo lampinstalled

E28 V lamp

A

TerminalType

2.110 x .020(solder or

quick-connect)

3.025 x .025

(printed, circuitor push-on)

2

CircuitryCodes

EA

4.5-24 VDC EA E ESinking Momentary Alternate

Discount BE Example: AML11BBA2EASchedule Qty.: 25 pieces/listing Square, pushbutton switch housing, non-lighted; black bezel; .110 x .020Unclass. termination; momentary action; current-sinking output for use with 5-volt supply.


AML12 LED DISPLAY ORDER GUIDE

HousingType

Standard BezelAML12C Square 1 LED

Full Guard BezelAML12J Square 1 LED

AML12C

BezelColor

BBlack

B

LED Color/Voltage

RedB VC 5V

YellowJ 5VM 24V

GreenS 5VX 24V

B

Terminal Type/Diode Protection


quick-connect)

3.025 x .025

(printed, circuitor push-on)

8.110 x .020with diodeprotection

2

CircuitryCodes

EA

4.5 - 24 EA EEVDC Momentary Alternate

Sinking

Discount BE Example: AML12CBB2EASchedule Qty.: 25 pieces/listing Square, pushbutton switch housing; black bezel; red LED; .110 x .020Unclass. termination; current-sinking output for use with 5-volt supply; momentary action.

CP-1 Honeywell • Sensing and Control Availability of options is subject to change without notice


AML21 Electronic control pushbutton switches


HousingType

Standard BezelAML21B Square non-lightedAML21C Square 1 lamp ckt.AML21E Rect. non-lightedAML21F Rect. 1 lamp ckt.AML21G Rect. 2 lamp ckts.

Full Guard BezelAML21H Square non-lightedAML21J Square 1 lamp ckt.AML21K Rect. non-lightedAML21L Rect. 1 lamp ckt.AML21M Rect. 2 lamp ckts.

AML21B

BezelColor

BBlack

B


ANo lampinstalled

B6 V lamp

C14 V lamp

E28 V lamp

A

TerminalType


quick-connect)

3.025 x .025(printed ckt.or push-on)

2

Circuitry Codes(Each pole has double-throw)

AA

Discount BE Example: AML21BBA2AASchedule Qty.: 25 pieces/listing Square, pushbutton switch housing, non-lighted; black bezel; .110 x .020Unclass. termination; 1-pole, double throw; silver contacts.

Mom. Action.AA 1-poleAC 2-poleCC 4-pole

Alt. ActionAB 1-poleAD 2-poleCD 4-pole

Mom. ActionBA 1-poleBC 2-poleDC 4-pole

Alt. ActionBB 1-poleBD 2-poleDD 4-pole

Mom. ActionEA 1-poleEC 2-pole

SilverContacts

GoldContacts

Gold-platedSilver

Contacts

AML22 Electronic control pushbutton switches


HousingType

Standard BezelAML22C Square 1 LEDAML22H Square 1 high

profile LED (for usewith AML-52Abuttons)

Full Guard BezelAML22J Square 1 LED

AML22C

BezelColor

BBlack

B

LED Color/Voltage

RedB VC 5VD 10VE 15VF 24V

YellowH VJ 5VK 10VL 15VM 24V

GreenR VS 5VT 10VW 15VX 24V

B

TerminalType


quick-connect)



2

Circuitry Codes(Each pole has double-throw)

AA

Discount BE Example: AML222CBB2AASchedule Qty.: 25 pieces/listing Square, pushbutton switch housing with one LED, black bezel; red LED (withoutUnclass. resistor); .110 x .020 termination; momentary action; 1-pole, double throw; silver

contacts.

Mom. Action.AA 1-poleAC 2-pole

Alt. ActionAB 1-poleAD 2-poleCD 4-pole

Mom. ActionBA 1-poleBC 2-pole

Alt. ActionBB 1-poleBD 2-poleDD 4-pole

SilverContacts

GoldContacts

Availability of options is subject to change without notice Honeywell • Sensing and Control CP- 2




HousingType

AML23E

Operator/Bezel Color

BBlack/Black

B


ANo lampinstalled

B6 V lamp

C14 V lamp

E28 V lamp

A

TerminalType


quick-connect)

3.025 x .025

(printed, ckt.or push-on)

2

Discount BE Example: AML23EBA2AA01Schedule Qty.: 25 pieces/listing Rectangular, non-lighted paddle switch housing; black paddle and bezel;Unclass. .110 x .020 terminals; with one circuit ON and one circuit OFF in each extreme

operator position (maintained).! for non-illuminated switches only.

AML23ERectangularnon-lighted

AML23FRectangular

1 lamp ckt. (A)

AML23GRectangular

2 lamp ckts.(A & B)

CircuitryCodes

Silver ContactsAA 1-poleAC 2-pole!CA 2-poleCC 4-pole!

Gold ContactsBA 1-pole

Insert codeletters as shownin Circuitry Chart

AA

OperatingAction

Nocharge

Insert Codenumbers from

OperatingAction Chart

01



AML25 Electronic control paddle switches



BBlack/Black

B



quick-connect)



2

CircuitryCodes

Silver ContactsAA

1-pole

CA2-pole

Gold ContactsBA

1-pole

DA2-pole

Insert code lettersas shown in

Circuitry Chart

AA

Discount BE Example: AML25FBB2AA01RXSchedule Qty.: 25 pieces/listing Rectangular paddle switch; illuminated with one red LED, this device has a blackUnclass. paddle and bezel, and .110 x .020 terminals; with one circuit ON and one circuit OFF

in each extreme operator position (maintained).

HousingType

AML25FRectangular

1 LED

AML25GRectangular

2 LEDs

AML25F

LEDVoltage

BV

C5 V

D10 V

E15 V

F24 V

B

OperatingCode

Nocharge

Insertcode

numbersfrom

OperatingActionChart

01

LED Color(LED A)

RRed

YYellow

GGreen

XNo LED

R

LED Color(LED B)

RRed

YYellow

GGreen

XNo LED

X



AML24 Electronic control rocker switches


HousingType

AML24E

BezelColor

BBlack

B


ANo lampinstalled

B6 V lamp

C14 V lamp

E28 V lamp

A

TerminalType


quick-connect)


2

Discount BE Example: AML24EBA2AA01Schedule Qty.: 25 pieces/listing Rectangular, non-lighted rocker switch housing; black bezel; 110 x .020 terminals;Unclass. .with one circuit ON and one circuit OFF in each extreme operator position (maintained).

! for non-illuminated switches only.


AML24FRectangular

1 lamp ckt. (A)

AML24GRectangular2 lamp ckts.

CircuitryCodes

Silver ContactsAA 1-poleAC 2-pole!CA 2-poleCC 4-pole!

Gold ContactsBA 1-poleBC 2-pole!DA 2-poleDC 4-pole!

Insert Code lettersas shown in

Circuitry Chart

AA

OperatingAction

Nocharge

Insert Codenumbers from

OperatingAction Chart

01



AML26 Electronic control rocker switches**


BezelColor

BBlack

B



quick-connect)



2

CircuitryCodes

Silver ContactsAA

1-pole

CA2-pole

Gold ContactsBA

1-pole

DA2-pole

Insert Code lettersas shown in

Circuitry Chart

AA

Discount BE Example: AML26FBB2AA01RXSchedule Qty.: 25 pieces/listing Rectangular rocker switch; illuminated with one LED, this device has a black bezel,Unclass. .110 x .020 terminals; with one circuit ON and one circuit OFF in each extreme

operator position (maintained).

** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing.

HousingType

AML26F1 LED

AML26G2 LEDs

AML26F

LEDVoltage

BV

C5 V

D10 V

E15 V

F24 V

B

OperatingAction

Insertcode

numbersfrom

OperatingActionChart

01

LED Color(LED A)

RRed

YYellow

GGreen

XNo LED

R

LED Color(LED B)

RRed

YYellow

GGreen

XNo LED

X



AML27 Electronic control keylock switches ****

AML27 NON-LIGHTED ORDER GUIDE

BezelColor

BBlack

B

TerminalType


quick-connect)

3.025 x .025

(printed circuitor push-on)

2

Circuitry Codes(each pole hasdouble throw)

Silver ContactsAA

1-pole

AC2-pole

Gold ContactsBA

1-pole

BC2-pole

AA

HousingType

AML27A

Squarehousing

non-lighted

AML27A

ButtonColor

KBlack

K

KeyCom-binations

(Two keysfurnished)

BA BBBK BCBL BDBE BSBF BW

BA

Operation Action(key out in center position,

except where noted)

21

CCW Center CW

21None Maint. Maint.

22*None Maint. Maint.

23None Maint. Mom.

24Maint. Maint. Maint.

25Mom. Maint. Mom.

26**Maint. Maint. Maint.

27***Mom. Maint. Maint.

28***Maint. Maint. Maint.

29†Maint. Maint. Maint.

30†Maint. Maint. Mom.

31††Maint. Maint. Mom.

* Key out in both positions** Key out in all three positions*** Key out in center and CW positions† Key out in center and CCW positions†† Key out in CCW only

!

Key Key CatalogCombi- Code Listingnation

BA 110 30PA101-AMLBB 109 30PA102-AMLBD 107 30PA104-AMLBE 106 30PA105-AMLBS 117 30PA117-AMLBT 118 30PA118-AMLBV 119 30PA119-AMLBW 120 30PA120-AML

Note: These keys fit the 5-bit keylocksin the Order Guide

Discount BESchedule Qty: 25 pieces/listingUnclass.

REPLACEMENT KEYSOne key per listingFive piece minimum order quantity for keys

!Specify different key combinations to acquire different keys, i.e.:

AML27ABK2AA21BB and AML27ABK2AA21BE have different keys.AML27ABK2AA21BB and AML27ABK3BC25BB have identical interchangeable keys.

28 and 29 operating actions should be used with key combinations BA or BB.

Example: AML27ABK2AA21BA Square housing; black bezel and button; .110 x .020 terminals;2-pole double-throw; silver contacts; 3-position maintained and key code “BB”.


**** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing.


AML31 Power duty pushbutton switches*


HousingType

Standard BezelAML31E Rect. non-lightedAML31F Rect. 1 lamp ckt.

Full Guard BezelAML31L Rect. 1 lamp ckt.

AML31E

BezelColor

BBlack

B


ANo lampinstalled

B6 V lamp

C14 V lamp

E28 V lamp

A

TerminalType


quick-connect)

4

CircuitryCodes

AC

2-pole, single-throw,normally open, Form X

AD ACAlt. action Mom. Action

Discount BE Example: AML31EBA4ACSchedule Qty.: 25 pieces/listing Rectangular pushbutton switch housing, non-lighted; black bezel; .187 x .020Unclass. terminals; momentary action; 2-pole, single-throw, normally open, Form X

* NOTE: Contact Customer Service for a minimum quantity required to establish or reinstate a catalog listing.

AML32 Power duty pushbutton switches*

AML32 NEON DISPLAY ORDER GUIDE

HousingType

Standard BezelAML32F Rect. 1 Neon lamp

Full Guard BezelAML32L Rect. 1 Neon lamp

AML32F

BezelColor

BBlack

B

Neon LampVoltage/Color

RedB 125 VACC 250 VAC

ClearK 125 VACL 250 VAC

GreenM 125 VACP 250 VAC

C

Terminal TypeLamp Circuit


quick-connect)with isolatedlamp circuit

7.187 x .020with integrallamp circuit

7

CircuitryCodes

AA

2-pole, single-throw,normally open, Form X

AD ACAlt. action Mom. Action

Discount BE Example: AML32FBC7ACSchedule Qty.: 25 pieces/listing Rectangular pushbutton switch housing; black bezel; 250 volt, red neon lamp;Unclass. .187 x .020 terminals with integral lamp circuit; momentary action; 2-pole, single-

throw, normally open, Form X

* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing.



AML33 Power duty paddle switches*


HousingType

AML33E


BBlack/Black

B


ANo lampinstalled

A

TerminalType


quick-connect)

4

Discount BE Example:AML33EBA4AA01Schedule Qty.: 25 pieces/listing Rectangular, non-lighted device; black paddle and bezel; .187 x .020 terminals;Unclass. 1-pole, Form A Single Throw; with one circuit ON in one extreme position and OFF

in the other.



AML33FRectangular1 lamp ckt.

CircuitryCodes

Silver ContactsAA

1-pole(one Form Asingle-throw,

normally open)

AC2-pole

(Two Form A)

AA

OperatingAction

01Maint. Maint.

ON OFF

01

AML34 Power duty rocker switches*


HousingType

AML34E

BezelColor

BBlack

B


ANo lampinstalled

A

TerminalType


quick-connect)

4

Discount BE Example:AML34EBA4AA01Schedule Qty.: 25 pieces/listing Rectangular, non-illuminated device; black paddle and bezel; .187 x .020 terminals;Unclass. 1-pole, Form A single throw; with one circuit ON in one extreme position and OFF in the

other.


AML34ERectangularnon-illum.

AML34FRectangular1 lamp ckt.

CircuitryCodes

Silver ContactsAA

1-pole(one Form Asingle-throw,

normally open)

AC2-pole

(Two Form A)

AA

OperatingAction

01Maint. Maint.

ON OFF

01



AML35 Power duty paddle switches*


HousingType

AML35F


BBlack/Black

B

Neon LampVoltage

RedB

125 VAC

B

Terminal Type/Lamp Circuit


quick-connect)with isolatedlamp circuit

7.187 x .020

with integral lampcircuit (available

with 2-poledevices only)

4

Discount BE Example:AML35FBB4AA01Schedule Qty.: 25 pieces/listing Rectangular paddle switch housing; black paddle and bezel; 125 VAC neon lamp;Unclass. .187 x .020 terminals with isolated lamp circuit; 1-pole, Form A single throw; with

circuit ON in one extreme position and OFF in the other (maintained).


AML35FRectangular1 neon lamp

CircuitryCodes

Silver ContactsAA

(One Form Asingle-throw)Available only

with isolated lampcircuit, term.

type 4

AC2-pole

(Two Form A)

AA

OperatingAction

01Maint. Maint.

ON OFF

01

AML36 Power duty rocker switches*


HousingType

AML36F

BezelColor

BBlack

B

Neon LampVoltage

RedB

125 VAC

C250 VAC

B

Terminal Type/Lamp Circuit


quick-connect)with isolated lamp

circuit

7.187 x .020

with integral lampcircuit (available

with 2-poledevices only)

4

Discount BE Example:AML36FBB4AA01Schedule Qty.: 25 pieces/listing Rectangular rocker switch housing; black bezel; 125 VAC neon lamp; .187 x .020Unclass. terminals with isolated lamp circuit; 1-pole Form A single throw; with circuit ON in one

extreme position and OFF in the other.


AML36FRectangular1 neon lamp

CircuitryCodes

Silver ContactsAA

(One Form Asingle-throw)Available onlywith isolatedlamp circuit,term. type 4.

AC2-pole

(Two FormA)

AA

OperatingAction

01Maint. Maint.

ON OFF

01



AML41/42 Lighted indicators*

AML41 INCANDESCENT DISPLAY INDICATORS ORDER GUIDE

Housing Type

AML41C

BezelColor

BBlack

B

Incand.Lamp Type

ANo lamp installed

B6 V lamp

C14 V lamp

E28 V lamp

A

TerminalType


quick-connect)

3.025 x .025


2

Discount BESchedule Qty.: 25 pieces/listingUnclass.

Example:AML41CBA2Square (pushbutton style)indicator housing with one lampcircuit; black bezel; .110 x .020termination.

* NOTE: Contact CustomerService for a minimum quantityrequired to establish or reinstatea catalog listing.

Pushbutton LensStyle Style

AML41C (Use AML51-J,Square -K, and -L

1 lamp ckt. buttons only)

AML41D AML41JSquare, Rectangular

2 lamp ckts. 1 lamp ckt.

AML41F AML41KRectangular Rectangular1 lamp ckt. 2 lamp ckts.

AML41G AML41LRectangular Rectangular2 lamp ckts. 3 lamp ckts.

AML42 LED DISPLAY INDICATORS ORDER GUIDE


AML42S

BezelColor

BBlack

B

LED Color/Voltage

RedB VC 5VE 15VF 24V

YellowH V*J 5VL 15VM 24V

GreenR VS 5VW 15VX 24V

C

HousingType

AML42CSquare1 LED

AML42SRectangular

1 LED

AML42JFull guard

bezel with 1 LED

AML42KFull guard

bezel with highprofile LED

2

2 8.110 x .020 .110 x .020

(solder or q.c.) with diodeprotection

3.025 x .025



Example:AML42SBC2Compact indicator with blackbezel; 5 volt red LED; .110 x .020termination.

* NOTE: Contact CustomerService for a minimum quantityrequired to establish or reinstatea catalog listing.



AML45 Solid state LED annunciators*

AML45 ORDER GUIDE

LEDColor

AML45S

Color ofHousing Bezel

WWhite

KBlack

W

LEDVoltage

A2.4 V

C10 V

D15 V

F24 V

*K15 V HighIntensity

A

HousingType

AML45R2 LEDs

(for use withfull-screen)

AML45S2 LEDs

(for use withsplit-screen)

RY

Side 1 Side 2

R RRed Red

Y YYellow Yellow

G GGreen Green

A AAmber Amber

H HRed Red

Discount BE Example:AML45SWA2RYSchedule Qty.: 25 pieces/listing Split-screen type housing with white bezel, 2.4 V LEDs, .110 x .020Unclass. termination; red LED in side 1 and yellow LED in side 2

*K must have two LEDs – uses A or H LEDs only

SPACERS: 30PA1-AML (package of 10) - unclassified


TerminalType


quick-connect)

30.25 x 0.25

(printed circuit)


2

AML51 Button Parts

Catalog Listing Description

Full Filter – Square Translucent "AML51- Z1 Red

-Z2 Yellow-Z3 Green-Z5 White

Full Filter – Rectangular Translucent "AML51- Z6 Red

-Z7 Yellow-Z8 Green

Split Filter – Rectangular Translucent "Catalog listing includes two splitsAML51- Z16 Red

-Z20 White

Split Filter – Rectangular Translucent !Catalog listing includes two splitsAML51- Z42 Red

-Z43 Yellow-Z44 Green-Z46 Clear


Five piece minimum order quantity

" For use with Clear Cap and Dead Front Buttons! For use with Projected Color Buttons

NOTE: Projected color buttons are the AML51-C10W and AML51-F10W



AML51/52 Lens/Buttons

AML51 LENS ORDER GUIDE (for incandescent display AML41J, K and L indicators)

Button Type(Lens style)

AML51J

Display/LegendType

Transmitted Color10 No legend20 With legend

Transmitted Color(clear cap & color insert)

11 No legend21 With legend

Dead Front(smoky gray cap &

color insert)30 No legend40 With legend

Projected color(white cap & color insert)

50 No legend60 With legend

10 R

Full coloror 1st 2nd 3rd

color split color split color split

R R RRed Red Red

Y Y YYellow Yellow Yellow

G G GGreen Green Green

B B BBlue Blue Blue

W W WWhite White White

A** A** A**Amber Amber Amber


Five piece minimum order quantity forbuttons

Example: AML51-J10RRectangular lens-type button; full color;transmitted color, no legend; red

** Not available in projected color

Not all color combinations are available for two and threepiece buttons

AML51-J

AML51-K

AML51-L

AML51 Buttons for switches and indicators

AML51 PUSH BUTTON ORDER GUIDE

Full Color or1st Color Split

R

Display/LegendType



11 No legend21 with legend


color insert)30 No legend40 with legend



10AML51-C

For switches or indicators:

AML51-C AML51-F AML51-G

AML51-A AML51-H AML51-N†

AML51-B AML51-E AML51-M

AML51-R

For indicators only

AML51-D*Available with transmitted color (10 or 20) only

RRed

YYellow

GGreen

BBlue

WWhite

K***Black

L***Gray

A**Amber

Button Type(Pushbutton Type)

2nd Color Split

–

RRed

YYellow

GGreen

BBlue

WWhite

K***Black

L***Gray

A**Amber

** Available with transmitted and dead-front only*** Black and gray not recommended for lighted display† AML51-N buttons not available with Display/Legend Types 10 and 20Note: Dimensions include the .060 in bezel

Example: AML51-C10RSquare full color button; with transmitted color, no legend; red

NOTE: AML51 has a $6.00 net each recurring set-up charge per legend. A one-time charge of $70.00 applies to establish a newgraphic legend.



AML52 Buttons

AML52 BUTTON ORDER GUIDE (for LED/Neon display)

Cover Color

AML52-N

Display/LegendType (see note)

Transmitted Color

10No legend

20with legend

NOTE:AML52 and AML53 have$6.00 net each recurringset-up charge per legend.A one-time charge of$70.00 applies toestablish a new graphiclegend.

10

ButtonType

For LED DevicesAML52-A

AML52-C*

For Neon DevicesAML52-N

* Not available for lighted display

R

½ cover orone side of Other side of

two-piece cover two-piece cover

R RRed Red

Y YYellow Yellow

G GGreen Green

B BBlue Blue

W WWhite White

K* K*Black Black


Five piece minimum order quantity for buttons

Example:AML52-N10RRectangular full screen; for use on neon powerswitch with transmitted color, no legend; red button.

ButtonColor

RRed

YYellow

GGreen

BBlue

WWhite

KBlack

LGray

R

AML53 Covers for paddle switches

AML53 PADDLE SWITCH COVER ORDER GUIDE (for incandescent or non-lighted display)

Paddle SwitchCover Type

AML53-T

Display/LegendType








10

AML53-E½ Cover

AML53-TTwo-piece cover

Use only with “T” Covers

Discount BE

Schedule Qty.: 25 pieces/listingUnclass.


Example:AML53-T10RGTwo-piece cover; with transmitted color,no legend; red and green.

NOTE: AML52 and AML53 have $6.00net each recurring set-up charge perlegend. A one-time charge of $70.00applies to establish a new graphiclegend.

* Not for lighted display** Not available with projected color


G


Rocker Color

R

Full rocker,½ rocker, or Other side ofone side of two-piecetwo-piece rockersrockers

R RRed Red

Y YYellow Yellow

G GGreen Green

B BBlue Blue

W WWhite White

K* K*Black Black

L* L*Gray Gray

A** A**Amber Amber

AML54 Rocker switch operators

AML54 ROCKER OPERATOR ORDER GUIDE (for incandescent or non-lighted display)

Rocker OperatorType

AML54-F

Display/LegendType








10

AML54-FFull rocker

AML54-E½ rocker

AML54-TTwo-piece rocker

Discount BE



Example:AML54-F10RFull rocker; with transmitted color, nolegend; red

NOTE: AML54 and AML55 have $6.00net each recurring set-up charge perlegend. A one-time charge of $70.00applies to establish a new graphiclegend.

* Not for lighted display** Not available with projected color† Not available for use with AML34 power switches


AML55 PADDLE SWITCH COVER ORDER GUIDE (for neon display)

AML55-N


Transmitted Color

10No legend

20with legend

10


AML55-N Full neon coverwith colored lens



AML55-N covers have a colored lenticularlens window which extends over the neonlamp.

Example:AML55-N10RYFull neon paddle switch cover; withtransmitted color, no legend; red lens andyellow cover.

LensColor

TClear

RRed

R

CoverColor

RRed

YYellow

GGreen

BBlue

WWhite

KBlack

LGray

Y



Cover Color

R

½ coveror LED side of Other side of

two-piece two-piececovers* covers

R RRed Red

Y YYellow Yellow

G GGreen Green

B BBlue Blue

W WWhite White

K KBlack Black

L LGray Gray


AML55 PADDLE SWITCH COVER ORDER GUIDE (for LED display)


AML55-T

Display/LegendType


10

AML55-E½ cover (for 1 LED)*

AML55-TTwo-piece cover

(for one LED)

AML55-HTwo-piece cover(for two LEDs)

Discount BE


Five piece minimum order quantity forbutton.

AML55-E, -T, and -H covers have anopen window which allows LEDs to beflush with the cover surface.

*NOTES:1 Only one color code letter is necessaryfor AML55-E ½ covers

2 To order a ½-cover without the LED“window,” specify an AML53-E listing.

Example:AML55-T10YRTwo-piece cover; with LED window inone side, transmitted color, no legend;yellow (LED side) and red (non-LEDside).

NOTE: AML55 has a net $6.00 recurringset-up charge per legend. A one-timecharge of $70.00 applies to establish anew graphic legend.

Y See notes below



Rocker Color

B

½ rockeror LED side of Other side of

two-piece two-piecerockers rockers

R RRed Red

Y YYellow Yellow

G GGreen Green

B BBlue Blue

W WWhite White

K KBlack Black

L LGray Gray


AML56 ORDER GUIDE (for LED display)

RockerOperator Type

AML56-T



10

AML56-E½ rocker*

(for 1 LED)

AML56-TTwo-piece rocker

(for one LED)

AML56-HTwo-piece rocker

(for two LEDs)

Discount BE


Five piece minimum order quantity forbutton.

Example:AML56-T10RBTwo-piece rocker; with LED window inone side, transmitted color, no legend;red (LED side) and blue (non-LED side).

R


AML56 ROCKER OPERATOR ORDER GUIDE (for neon display)

AML56-N

Display/LegendType

Transmitted Color

10No legend

20with legend

10

RockerOperator Type

AML56-N Full rocker

with colored lens



AML56-N covers have a colored lenticularlens window which extends over the neonlamp.

Example:AML56-N10RYFull rocker; with transmitted color, nolegend; yellow rocker and red lens

NOTE: AML56 has a $6.00 net eachrecurring set up charge per legend. A one-time charge of $70.00 applies to establish anew graphic legend.

LensColor

TClear

RRed

YYellow

R

RockerColor

RRed

YYellow

GGreen

BBlue

WWhite

KBlack

Y



AML59 Solid state LED annunciators*

AML59 ORDER GUIDE

CapStyle

AML59-R

CapColor

10No legend

20*Negative

Film Legend

21*Positive

Film Legend

K R

Filter colorFull Split Screen

R R RRed Red Red

Y Y YYellow Yellow Yellow

G G GGreen Green Green



Examples: AML59-RK10RFull-screen style, black cap, no legend andred filter

AML59-SK20RYSplit-screen style, black cap, negative filmlegend, red and yellow color filters

*AML59 has a $6.00 net each recurringset-up charge per legend. A one-timecharge of $70.00 applies to establish anew graphic legend.

AML59-RFull screen

AML59-SSplit screen

KBlack

LegendType*

10

AML61 Mounting Hardware*

AML61 MOUNTING HARDWARE ORDER GUIDE (for standard strip-mount assemblies)

Type

AML61B

Example: AML61EC5AFive rectangular cans, plain finish (unpainted), long sides abutting; type A mountingbrackets on long sides, located flush with switch or indicator bezel. (Type T bracket brings top of annunciator bezel flush with top of.160 in./4,1 mm panel).* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing

Square cans

AML61BPlain finish

AML61J(Black finish)

Rect. cans

AML61EPlain finish

AML61K(Black finish)

Mounting BracketOrientation

A

Numberof cans

5

Square Hous.123456789

101112

Rect. Hous.123456789

101112

Mounting BracketLocation

A


Availability of options is subject to change without notice Honeywell • Sensing and Control CP-18

*To order one rectangular can with mounting brackets on short sides, specify AML61EB1__ or AML61KB1__.

* NOTE: Contact Customer Service for minimum quantity required to establish or reinstatea catalog listing


AML71/75/76/78/79 Accessories *

AML71 BARRIER ORDER GUIDE(Barriers shown in order guide are black)

AML75 PANEL SEAL ORDER GUIDE

Barrier Length Type Catalog Listing

Center AML71SCB

End AML71SEB

Center AML71LCB

End AML71LEB

Short(For use with square devices andshort-side of rectangular devices)

Long(For use with long side of rectangulardevices)

For use with:

Square 19” Rectangular 19”Description high pushbuttons high pushbuttons Rockers

Base & Seal AML75ABC AML75BBC AML75RBC

AML76 SWITCH ORDER GUIDE

Guard Type Catalog Listing

Square AML76C10T01P

Rectangular AML76F10T01P

AML78 PANEL PLUGS

Description Catalog Listing

Square AML78CB

Rectangular AML78FB


Notes: Not for use with AML61 mounting hardwareNot for use with AML41J, K, or L lens-type indica-tors; or AML45 annunciators


Notes: Multiple units should not be mounted in asingle slot, since this would create an unsealedspace between each unit. AML75 seals are not foruse with barriers, full-guard bezels, AML61mounting hardware, AML45 annunciators, orAML41J, K or L lens-type indicators.

AML79 CONNECTOR BLOCKThis connector block can be used with square 1 and 2 poleAML21 and AML22 switches with .110 x .020 terminalsto enable plug-in wiring.AML79CC

* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing

DUMMY HOUSING ORDER GUIDE

Description Catalog Listing

Rectangular (pushbutton) AML78F100

Rectangular (lens indicator) AML78J100

* Order AML51 buttons/lenses for use with dummy housings



AML91/92 Lamps/LEDs**

AML91 LAMP ORDER GUIDE

AML92 LED ORDER Guide


Ten piece minimum order quantity for lamps andLEDs.

Lamp Industry CatalogType Lamp No. Voltage Listing

86 6.3 AML91LA86

73 14.0 AML91LA73

85 28.0 AML91LA85

IncandescentT-1-¾

wedge base

LED Color Quad Chip Six Chip

Red AML92ERY AML92ERL

Green AML92EGY AML92EGL

Yellow AML92EYY AML92EYL

White - AML92EWL*

* For use with white or yellow buttons

** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing



MML11 Solid state pushbutton switches*

MML11 LED, INCANDESCENT, OR NON-LIGHTED DISPLAY ORDER GUIDE


Catalog listing codes for switch,less assembled display options

Example: MML11KK3AAKSolid state pushbutton housing (black), nobezel; PWB terminals; momentary action;5 VDC, current sinking output, blackplunger

Example: MML11KK3AAKRSDRAs above, except furnished with blackbezel; mounting clips (long sides); redLED, and red lens installed

Housing Type(Rectangular)

MML11K

Mounting

KBlack bezel, mtg.

clip/long sides

K

Terminals

3Printed

wiring board

3

MML11KBlack housing

Circuitry/Action

AA5 - 24 VDC sinking,

mom. action

AA

MML21 Electronic control pushbutton switches*

MML21 (RECTANGULAR) LED, INCANDESCENT, OR NON-LIGHTED DISPLAY ORDER GUIDE



Example: MML21KK3AAKElectronic control pushbutton switch;rectangular housing (black); bezel (black);mounting clips on long sides, PWBterminals; 1-pole momentary action, silvercontacts, black plunger

Example: MML21KK3AAKRSDRAs above, except furnished with red LEDand red lens installed

Housing Type(Rectangular)

MML21K

Mounting

ANo bezel (PWB

mounting)

KBlack bezel, mtg.

clip/long sides

K

Terminals

3Printed

wiring board

2Solder

3

MML21KBlack housing

Circuitry/Action(Each pole is double throw)

Silver ContactsAA 1-pole, mom. actionAB 1 pole, alt. actionAC 2-poles, mom. action*AD 2 poles, alt. action

Gold ContactsBA 1-pole, mom. actionBB 1 pole, alt. actionBC 2-poles, mom. action*BD 2 poles, alt. action

* Specify AC or BC for use with encoded umbrellastyle buttons.

AA




Plunger

KBlack

K

LED(Stanley Type)

XX No LEDRS Red*YS Yellow*GS Green*

* Permanently installed.

RS

Lens

For LED DisplayDR RedDY YellowDG Green

For incandescent ornon-lighted displayLR RedLY YellowLG GreenLW WhiteLK Black

DR

Legend

20 with legend

A $6.00 recurring set upcharge per legend. A one-timecharge of $70.00 applies toestablish a new graphiclegend.

Leave this space blank,if legend not desired

Order MML11 display options assembled to switch by adding codes below.

Stnd.Plunger(w/o lens)

KBlack

WWhite

K

LED(Stanley Type)

XX No LEDRS Red*YS Yellow*GS Green*

* Permanently installed.

RS

Lens

XX No lens*For LED Display

DR RedDY YellowDG Green


* Enter XX when 1-piece plunger/lens isspecified and legending is required.

DR

Legend

20with legend

A $6.00 recurring setup charge perlegend. A one-timecharge of $70.00applies to establish anew graphic legend.



1-piece Plunger/LensCap Buttons

For LED DisplayH RedL YellowN Green

For incandescent ornon-lighted display

R RedY YellowG GreenZ Black



MML21 Electronic control pushbutton switches*

MML21 (SQUARE) LED, INCANDESCENT, OR NON-LIGHTED DISPLAY ORDER GUIDE

Discount BESchedulet Qty.: 25 pieces/listingUnclass.


Example: MML21HR3AAKXXDRElectronic control pushbutton switch; square housing (black); bezel (black) and mountingclips; PWB terminals; 1-pole momentary action, silver contacts; black plunger, with redlens installed.

Housing Type(Square)

MML21H

Mounting

ANo bezel

(PWB mounting)

RBlack bezel/

mtg. clip

R

Terminals

3Printed

wiring board

2Solder

3

MML21HBlack housing

Circuitry Action(Each pole is double throw)

Silver ContactsAA 1-pole, mom. actionAB 1 pole, alt. action

Gold ContactsBA 1-pole, mom. actionBB 1 pole, alt. action

AA




Stnd.Plunger(w/o lens)

KBlack

WWhite

K

LED

XX No LED

LEDs are not permanentlyinstalled in square housingsby Honeywell Sensing andControl.

Use the MML93L recep-tacle.

XX

Lens

DR

Legend

20with legend




1-piece Plunger/LensCap Buttons

For LED DisplayH RedL YellowN Green


R RedY YellowG GreenZ Black

XX No lensFor LED Display





MML24 Electronic control rocker switches**

MML24 LED, INCANDESCENT, OR NON-LIGHTED DISPLAY ORDER GUIDE

Example: MML24KA3AA01HDRXXElectronic control rocker switch with black housing, printed wiring board terminals; one-pole, silver contacts; 2-position, maintainedaction; one-circuit ON in each position; black rocker, red lens for LED display in Side 1 and no lens in Side 2.


Housing Type

MML24K

Mounting

ANo bezel

(PWB mounting)

KBlack bezel/

mtg. clip/long sides

A

Terminals

3Printed

wiring board

2Solder

3

MML24KBlack housing

Circuitry

AAACBABC

AA

* Lighted switches with solder terminals require MML93Rreceptacle to install lamps or LEDs.




Action

NoCharge

01

Lens(Side 1)

XX None

LED Incand.display: display:DR Red LR RedDY Yellow LY YellowDG Green LG Green

LW White

DRXX

Lens(Side 2)

Legend

20with legend



Rocker

BBlack rocker

HBlack rocker,

one lens*

FWhite rocker,

one lens*

XX None

LED Incand.display: display:DR Red LR RedDY Yellow LY YellowDG Green LG Green

LW White

H

* Lighted switches with solder terminals require MML93R receptacle to installlamps or LEDs.

Availability of option is subject to change without notice Honeywell • Sensing and Control CP-26


MML46 Indicators/flush mount**

MML46 LED OR INCANDESCENT DISPLAY ORDER GUIDE

Housing Type

MML46K

MountingRectangular

ANo bezel

(PWB mounting)

KBlack bezel,


A

MountingSquare

ANo bezel

(PWB mounting)

RBlack bezel,


MML46KRectangular

(1 or 2 LEDs orincand. lamps)Black housing

MML46HSquare

(1 LED orincand. lamp)Black housing

* LEDs are not permanentlyinstalled in square housingsby Honeywell Sensing andControl.

SupportPosts

3PWB

2Solder**

No charge

0None

(for snap-in andstrip/matrix mount)

No charge

3

** Rectangular housings only


Example:MML46KA3Indicator housing, rectangular (black); nobezel; support terminals

Example: MML46KA3RSXXDR20 )As above, except furnished with red LEDand red lens, with legend

MML51 Button lenses/incandescent or non-lighted display**

MML51 ORDER GUIDE

Lens Type

MML51E

Display/LegendType

10No legend

20With Legend

A $6.00 recurringset up charge perlegend. A one-timecharge of $70.00applies toestablish a newgraphic legend.

20

Color

RRed

YYellow

GGreen

WWhite

KBlack (opaque)

RectangularMML51E

Switch lens

MML51G*Indicator lens

* Use MML51E with MML41rectangular pushbutton styleindicators



Example:MML51E20RIncandescent or non-lighted display switch lens; redtransmitted color, with legend. Unclassified.

** NOTE: Contact Customer Service for minimum quantityrequired to establish or reinstate a catalog listing

R




Lens

For LED display


DR

Legend

20with legend



Available in rectangular housingsonlyXX No LED

One LED* Two LEDs*RSXX Red RSRS RedYSXX Yellow YSYS YellowGSXX Green GSGS Green

* Permanently installed


LR RedLY YellowLG GreenLW WhiteLK Black

RSXX

* When ordering incandescent or non-lighted display, LED field must beXXXX.

Order MML46 display options assembled to indicator by adding codes below.

LED(Stanley type)

Since square housings accept onlyone LED, only a two-character LEDcode is necessary.For example:MML46HR0XXDY orMML46HR0RSDY

MML52 Button lenses/LED**MML52 ORDER GUIDE

Lens Type

MML52G

Display/LegendType

Trans. Color10

No legend

20With Legend

A $6.00 recurringset up charge perlegend. A one-timecharge of $70.00applies toestablish a newgraphic legend.

10

Color/Illumination

LED DisplayR

Red

YYellow

GGreen

CClear

RectangularMML52E

Switch lensLED display

MML52G*Indicator lens

* Use MML52E with MML41rectangular pushbutton styleindicators



Example:MML52G10YLED display indicator lens; yellow transmitted color, nolegend. Unclassified.

** NOTE: Contact Customer Service for minimum quantityrequired to establish or reinstate a catalog listing

Y

Availability of option is subject to change without notice Honeywell • Sensing and Control CP- 28

20


MML72 Bezels/mounting clips*


Ten piece minimum order quantity

Example:MML72EEKBlack switch bezel, mounting clips on long sides.


MML92 LEDs***

MML92 ORDER GUIDELEDs should be the same color as the lenses they illuminate. They are packed 10 per listing, including stand-off spacers for use whensolder terminating to a printed wiring board.


Long lead: Anode (+), Short lead: Cathode (-).* @ 25 mA.** Also rectangular button lens, when used with MML93J solder terminal receptacle.

*** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing

Forward LEDLED Use to Catalog LED Characteristics Manufacturers’Type Illuminate Listing Color Typ. @ 20mA Max. Part Numbers

T-1-3/4 Rectangular Stanley:button lens MML92ERS Red 1.7V 2.0V ESBR5633

MML92EGS Green 2.1V 2.5V ESBG5633MML92EYS Yellow 2.1V 2.5V ESAY5633

T-1 Square Stanley:button lens and MML92HGS Green 2.1V 2.5V ESPY3901

MML24 rocker lens**

Hewlett Packard:MML92HRH Red 2.2V* 3.0V HLMP-1340MML92HGH Green 2.3V* 3.0V HLMP-1540



MML93 LED/Incandescent lamp receptacles*

MML93 RECEPTACLE ORDER GUIDE

These receptacles do not include LEDs or lamps.


Receptacle Type Catalog Listing Mates With Use to Illuminate

Printed Wiring MML93K T-1 3/4 LED Rectangular button lens or umbrella button lens

Board MML93G T-1 LED or bi-pin lamp Square button lens or MML24 rocker lens

Solder Terminal MML93J T-1 LED or bi-pin lamp Rectangular button lens

Solder MML93L T-1 LED or unbased T-1 lamp Square button lens

MML93R T-1 LED or unbased T-1 lamp MML24 rocker lens


Availability of option is subject to change without notice Honeywell • Sensing and Control CP-30

honeywell aml series advanced manual line panel … aml.pdf · manual switches aml series advanced...

Documents