honeywell internalenvirofdok.org/wp-content/uploads/2018/11/health-safety...2018/10/17 ·...
TRANSCRIPT
Honeywell Internal
Agenda
•Standards & Regulations (updates/changes)
•Engaging the Team
•The Honeywell Difference
•Q&A
1
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
OSHA and ANSI Standards
US Regulations for fall protection are:
- OSHA Construction 29 CFR Part 1926
- OSHA General Industry 29 CFR Part 1910
Voluntary Consensus Standard
- ANSI Construction Standard A10.32
- ANSI General Industry Standard Z359
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
OSHA and ANSI Standards
US Regulations for fall protection are:
- OSHA Construction 29 CFR Part 1926
▪ 1926.500
▪ 1926.501
▪ 1926.502
▪ 1926.503
Scope and Application
Interpretations
Systems Criteria and Practices
Training Requirements
- OSHA General Industry 29 CFR Part 1910
▪ 1910.140 Walking/Working surfaces
- ANSI General Industry Standard Z359
▪ Was 1, now 18
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
Fall Protection Standards - ANSI Z359• ANSI/ASSE Z359.0- Definitions
• ANSI/ASSE Z359.1- Code
• ANSI/ASSE Z359.2 – Managed
Program
• ANSI/ASSE Z359.3 -Positioning &
Restraint
• ANSI/ASSE Z359.4 - Rescue
• ANSI/ASSE Z359.5 - PFAS
• ANSI/ASSE Z359.6 –Engineered
Systems
• ANSI/ASSE Z359.7 - Testing
• ANSI/ASSE Z359.8 – Rope Access
• ANSI/ASSE Z359.9 -Descending
Devices
• ANSI/ASSE Z359.10 - TBD
• ANSI/ASSE Z359.11 - Harnesses
• ANSI/ASSE Z359.12 -Connecting
Components
• ANSI/ASSE Z359.13 – Energy
Absorbers
• ANSI/ASSE Z359.14 – SRL’s
• ANSI/ASSE Z359.15 – SingleAnchor
Lifelines
• ANSI/ASSE Z359.16 - Ladders
• ANSI/ASSE Z359.17 – HLL’s for
PFAS
• ANSI/ASSE Z359.18 – Anchorage
Connectors
*NOTE*
Standards in RED have not been published
Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.Honeywell Internal
OSHA - Changes/Updates -1910.140
• Walking/working surfaces update – General Industry - (January 17, 2017)– https://www.osha.gov/walking-working-surfaces/
- Fixed ladders – 24’
▪ Cages no longer acceptable for FP on new ladders – Nov 19, 2018
▪ Ensure existing ladders (24’) have cages, wells, PFAS, Nov 18,2018
▪ Replace cages/wells on existing – Nov 18, 2036
- Connector
▪ 3600 lbs gate strength. 1910.140(c)(8)
▪ Not connected to HLL unless designed 1910.140(c)(10)
- Prompt rescue
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
GlideLoc and ViGo ladder systems
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
OSHA - Changes/Updates -1910.140
• ANSI Z359.11 – Harness
• ANSI Z359.14 – SRL’s
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
ANSI - Changes/Updates
Differences between Z359.1 and Z359.11 (harnesses)
8
Standard ANSI Z359.1 ANSI Z359.11
Static Strength Tests
Dorsal AttachmentElement: 5,000 lbs load applied for 1 minute 3,600 lbs load applied for 1 minute
Sternal AttachmentElement: 3,600 lbs load applied for 1 minute 3,600 lbs load applied for 1 minute
Static Strength Test not required 3,600lbs tests for Frontal, Shoulder, Waist, Hip,and
Suspension Seat Attachment Elements
Dynamic Performance Tests
Dorsal AttachmentElement: 1m drop test using 220 lb torso and a
cable lanyard. Angle-at-rest shall not
exceed 30°. Test is done once head-
first and once feet-first
Peak impact load must exceed 3,600 lbs. Angle-at-rest
shall not exceed 30° and harness stretch-out must not
exceed 18” on the feet-first drop. Test is done once
head-first and once feet-first
Sternal AttachmentElement: 1m drop test using 220 lb torso and a
cable lanyard. Test is done feet-first
only.
Drop test using 220 lb torso and a cable lanyard. Peak
impact load must exceed 3,600 lbs. Angle-at-rest shall
not exceed 50° and harness stretch-out must notexceed
18”. Test is done feet-firstonly
Frontal AttachmentElement: not required Drop test using 220 lb torso and a cable lanyard. Peak
impact load must exceed 3,600 lbs. Harness stretch-out
must not exceed 18”. Test is done feet-firstonly
Fall Arrest Indicator: not required Required for dorsal attachment elements; optional for
other attachment elements Includes Deployment Test
with minimum fall
Lanyard Parking Attachment: not required At least one is required and must have a disengagement
load of not more than 120 lbs.
Incorporate either a waist belt or
a back strap into theharness
not required Required
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
Z359.11 key differentiators
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
ANSI Z359.14 - Standards Update
ANSI/ASSE Z359.14-2012 Safety Requirements for
Self-Retracting Devices for Personal Fall Arrest and Rescue Systems
Heavier Test Weight for Dynamic Performance Tests
• Increased from 220 lbs. (100 kg) to 282 lbs.
• 1:1 conversion factor to model the forces of a fully tooled and clothed 310-lb. (141 kg) worker.
New SRD Classifications
Classification Maximum Arrest
Distance
Average Arrest
Force
Ave. Arrest Force
Conditioned
Peak Arrest Force
ClassA 24 in (610 mm) 1,350 lbs (6 kN) 1,575 lbs (7 kN) 1,800 lbs (8 kN)
Class B 54 in (1,372 mm) 900 lbs (4 kN) 1,125 lbs (7 kN) 1,800 lbs (8 kN)
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
ANSI/ASSE Z359.14-2012 Safety Requirements for
Self-Retracting Devices for Personal Fall Arrest and Rescue Systems
Self-Retracting Lanyard with Leading Edge (SRL-LE) Sharp-edge Testing
• Dynamic Performance Testing requires
dropping a 282 lb. (128 kg) weight over a
very sharp edge with the line of the SRL-
LE fully extended.
• Conducted with line perpendicular to the
edge as well as at an off-set of 5 feet.
• After Dynamic Performance Testing the
device must pay-out, retract and the
locking function must operate.
• Dynamic Strength Testing requires
repeating the perpendicular and off-set
tests with a 300 lb. (136 kg) weight.
ANSI Z359.14 - Standards Update
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
• Edges are involved w/most applications
• Many applications have no overhead anchor point
• Clearly a safety issue
• Evolving standards:
- ANSI/ASSE Z359.14-2014 Safety Requirements for Self-
Retracting Devices for Personal Fall Arrest and Rescue Systems
- New CSA Standard under development Z259.2.2 Self Retracting
Devices
• Continued shift from lanyards to SRLs
• Although limited, awareness of dangers associated w/edges is
increasing
ANSI Z359.14 - Standards Update
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
Leading Edge Fall Clearance Concerns
point•Set back distance to anchor
•Weight of user
•Lateral Edge
•Standing, kneeling, sitting
13
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
Leading Edge test video
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
ANSI Standards Update – Inspection
ANSI/ASSE Z359.14-2012 Safety Requirements for
Self-Retracting Devices for Personal Fall Arrest and Rescue Systems
New Guidelines for Inspection
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
ANSI Standards Update - Inspection
ANSI/ASSE Z359.14-2014 Safety Requirements for
Self-Retracting Devices for Personal Fall Arrest and Rescue Systems
• Added more specific requirements for the leading edge (LE)testing
• Edges not greater than 0.005 in (0.13 mm)
• Measurements taken approximately every 12 inches (300 mm)
• Additional requirements for the LE structure & more specific LE test procedureguidelines
• Removed factory authorized inspection
2014
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
Engagement
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
Miller Road Show
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
2017 US High Risk Fall Protection 21
F29 shares territory withF23
Alaska is hybrid position that covers HR and GS.
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
High Risk – US Fall Protection RSM’s22
Allen Fritts [email protected] High Risk Sales Leader Phone: 919-349-1979
Tom Dillon [email protected] Application Training Specialist Fall Protection Phone: 401-935-0529
Heath Fleshner - [email protected]
US West ZSM
Phone: 801-643-5805
OPEN – F1
@Honeywell.com
F1 RSM Fall
Phone: 206-291-4091
Ernie Williams
F2 RSM Fall
Phone: 408-981-9103
Robert Duran
F3 RSM Fall
Phone 909-936-0121
Rick Loomis
F4 RSM Fall
Phone: 401-316-6145
OPEN – F25
F25 RSM Fall
Phone: 801-643-5805
Michael Dunnuck
F28 RSM Fall
Phone: 714-222-4448
Todd Mackey
AK High Risk and Fall RSM
Phone: 907-232-4145
John Berger - [email protected]
US North Central ZSM
Phone: 630-464-6908
Dan Hacker
F5 RSM Fall
Phone: 719-306-3226
Mike Brockway
F6 RSM Fall
Phone: 920-285-9562
OPEN – F7
@Honeywell.com
F7 RSM Fall
Phone: 816-830-6182
Ray Redell
F10 RSM Fall
Phone: 630-442-9527
Scott Plovanich - [email protected]
US South Central ZSM
Phone: 832-284-5330
Jeff Kleber
F8 RSM Fall
Phone: 479-228-7386
OPEN – F9
F9 RSM Fall
Phone: 832-284-5330
OPEN – F19
@Honeywell.com
F19 RSM Fall
Phone: 401-339-0893
OPEN – F23
@Honeywell.com
F23 RSM Fall
Phone: 713-828-3281
Ralph Walton
F29 RSM Fall
Phone: 832-707-0881
Jeff Sebastyn - [email protected]
US Southeast ZSM
Phone: 386-233-0322
Jim Bell
F12 RSM Fall
Phone: 205-260-2307
Andrew Comiskey
F13 RSM Fall
Phone: 321-394-6960
Keith Delias
F14 RSM Fall
Phone: 910-728-0054
Ron Nobles
F15 RSM Fall
Phone: 410-340-3051
Kyle Harvey
F21 RSM Fall
Phone: 678-314-3217
Dennis Berry
F22 RSM Fall
Phone: 901-210-1340
Gerson Tacher
F26 RSM Fall
Phone: 305-778-2683
Matt McKernan - [email protected]
US Northeast ZSM
Phone: 215-630-0698
Dave Gallegly
F11 RSM Fall
Phone: 330-241-9271
Justin Samples
F16 RSM Fall
Phone:401-767-6702
Frank Conidi
F17 RSM Fall
Phone: 201-675-7843
Bob Wengryn
F18 RSM Fall
Phone: 412-580-9862
Lane Verschure
F24 RSM Fall
Phone: 616-304-1579
Gabe Millrood
F27 RSM Fall
Phone: 267-788-8443
CUSTOMER SERVICE (800) 430-5490
Inquiry email = [email protected]
Orders email = [email protected]
INSIDE SALES (800)589-2716
TECH SERVICE (800)873-5242
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
Fall Clearance App
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
Fall Clearance App
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
The work we do saves lives
26
HonHeoynweeylwl IenltleIrnntaelrnal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.
Questions
27
Honeywell Internal Honeywell Confidential - © 2017 by Honeywell International Inc. All rights reserved.