home security system cse 368 final project. created by : afra fanaee ralph weber dan
TRANSCRIPT
Home Security System
CSE 368
Final Project
Created by :
• Afra Fanaee • Ralph Weber• Dan
Project Description
• The Home Security system, using VHDL, with the following:– Functions– System operations– Logical follows:
• Initial stage• Setup stage• User interface • Violation or broken In
– System flow– properties
Functions
Will provide movement detection sensor for the following sections of the house:
Front Door Back Door First Window 2nd Window 3rd Window
Functions
• Activate and Deactivate
• Use logon ID to Activate or Deactivate the system for:
• Administrative Functions
• User (home owner ) Functions
Administrative Functions
• Setup the system
• Validate the entered Security ID
• Reset suspended User ID
• Provide User Messages, using Key Pad
• Setup the system
• Validate the entered Security ID
• Reset suspended User ID
• Provide User Messages, using Key Pad
User (home owner ) Functions
• Enter the Security ID, using the Key pad
• Validate the entered Security ID
• Modify the Activation selections
• Activate and Deactivate the system
System operations
• Display User Messages, using LED Display
• Turn on LD Light for each section, if any violation
• Turn the Alarm sound for any violation
Initial stage
• Reset the system
• Deactivate
Setup stage
• Use the Keypad or the Keyboard and enter the Administrative Security ID
• Display Security ID, Using LED Display
• System will validate the Security ID
• Enter the following, using the Keypad or the Keyboard to enter, used LED Display to display and save.
– Invalid Sec ID– System is Inactive– System is Active– Your SEC ID is Suspended– Violation on Front door – Violation on Back door– Violation on 1st window– Violation on 2nd window– Violation on 3rd window
• Use the Keypad or the Keyboard and enter the Administrative Security ID
• Display Security ID, Using LED Display
• System will validate the Security ID
• Enter the following, using the Keypad or the Keyboard to enter, used LED Display to display and save.
– Invalid Sec ID– System is Inactive– System is Active– Your SEC ID is Suspended– Violation on Front door – Violation on Back door– Violation on 1st window– Violation on 2nd window– Violation on 3rd window
User interface
• Use the Keypad or the Keyboard and enter the User Security ID
• Display Security ID, Using LED Display
• System will validate the Security ID
– Invalid Sec ID
– valid Sec ID
Invalid Sec ID
• Invalid Sec ID
– Display Invalid Sec ID, using LED Display and reset the system
– If more than
• Display : Your SEC ID is Suspended, using LED Display and lock the system
• Use the Administrative Sec ID to reset the system and the User Sec ID
valid Sec ID
valid Sec ID • Display Activation selection
• User will select sections
• If all , then activate system
• Else – Activated the system with selected sections