hollo-bolt - pretec as · 2019. 4. 25. · 4 reduces the possibility of water ingress. 4 steel and...
TRANSCRIPT
www.Lindapter.com
4 Reduces the possibility of water ingress.4 Steel and rubber bonded washers available.4 Comes with a washer between the bolt head and collar, and a washer under the collar.4 Use with standard CE Marked hexagonal Hollo-Bolts only.4 Alters the Hollo-Bolt clamping range, see table below.
Hollo-Bolt®
with sealing washersLindapter offers optional additional washers for use with standard CE Marked hexagonal Hollo-Bolts.
Key Information
Setscrew
Bolt Washer (Sealing Washer)
Collar
Sleeve
Collar Washer (Sealing Washer)
ConeD
H
S L BA/F
Combined wth Sealing Washers
Sleeve Collar Safe Working Loads(5:1 Factor of Safety)
Product Code Bolt Length Clamping Range Outer Ply Length Outer Ø Height Ø Torque Tensile Single ShearB
mmW
mmmin tmm
Lmm
Smm
Hmm
Dmm
A/Fmm Nm kN kN
HBSB08-1HDG M8 x 50 3 - 20.5 - 30 13.75 5 22 19 23 4.0 5.0
HBSB08-2HDG M8 x 70 20.5 - 39.5 - 49 13.75 5 22 19 23 4.0 5.0
HBSB08-3HDG M8 x 90 39.5 - 58.5 - 68 13.75 5 22 19 23 4.0 5.0
HBSB10-1HDG M10 x 55 3 - 20.5 - 30 17.75 6 29 24 45 8.5 10.0
HBSB10-2HDG M10 x 70 20.5 - 39.5 - 48 17.75 6 29 24 45 8.5 10.0
HBSB10-3HDG M10 x 90 39.5 - 58.5 - 67 17.75 6 29 24 45 8.5 10.0
HBSB12-1HDG M12 x 60 3 - 23 - 35 19.75 7 32 30 80 10.5 15.0
HBSB12-2HDG M12 x 80 23 - 45 - 57 19.75 7 32 30 80 10.5 15.0
HBSB12-3HDG M12 x 100 45 - 67 - 79 19.75 7 32 30 80 10.5 15.0
HBSB16-1HDG M16 x 75 9.5 - 26.5 8 41.5 25.75 8 38 36 190 21.0 30.0
HBSB16-2HDG M16 x 100 26.5 - 47.5 8 63 25.75 8 38 36 190 21.0 30.0
HBSB16-3HDG M16 x 120 47.5 - 68.5 8 84 25.75 8 38 36 190 21.0 30.0
HBSB20-1HDG M20 x 90 9.5 - 31.5 8 50 32.75 10 51 46 300 35.0 40.0
HBSB20-2HDG M20 x 120 31.5 - 57.5 8 76 32.75 10 51 46 300 35.0 40.0
HBSB20-3HDG M20 x 150 57.5 - 83.5 8 102 32.75 10 51 46 300 35.0 40.0
Components
min tW
+44 (0) 1274 521444 [email protected] Lindapter Technical Support for more details: