hochdruckpumpen high pressure waterjet pumps

high pressure waterjet pumps Hochdruckpumpen

Superior Waterjet Parts

For more information

ALLFI website : allfi.com ALLFI webshop : allfiwaterjetparts.comContact us : [email protected]

QUANTUM NXTTM Features

© 12

/202

0 A

LLFI

QUANTUM NXTTM PumpHigh Pressure Pumps

SpecificationQuantum 37/66

Max. Operating Pressure 4550 Bar 66,000 PSI

Max. Flow Rate 3,8 I/m 1,0 Gpm

Cooling Water Consumption 6,0 I/m 1.6 Gpm

Footprint 1,8 x 0,66 x 1,27 m 72 x 26 x 40 in

Weight 628 Kg 1385 Ib

• Easiest to Maintain – the superior design includes visual diagnostics, provides for easy, ergonomic access to the pump when maintenance is required and quick-change seal components allow for the fastest seal change in the industry • Most Efficient Waterjet Pump – Up to 60% more energy efficient than standard hydraulic intensifiers. Also, the much smaller footprint of the QUANTUMTM pump provides for efficient floor space utilization – over 50% less when compared to the average hydraulic pump• Superior Pump for Environmental Considerations – use up to 70% less cooling water than standard hydraulic intensifiers. This pump uses far less water and electricity to operate, combined with minimal oil usage compared to competitive products, makes it the best pump available for the environment• Most Cost Efficient – the combination of less overall downtime including unplanned downtime; fewer required component changes; fastest seal change timing; and requiring less electricity, cooling water and oil, all combine to make this pump the most cost-efficient high-pressure pump available• Industry 4.0 Ready – ALLFI technicians can provide remote assistance by logging into the pump to perform sophisticated diagnostics in real time




© 12

/202

0 A

LLFI

QUANTUM NXTTM PumpHigh Pressure Pumps

Part Number Description

Spare Parts

123456789

10111213141516

TE-SP-46-3TE-501-1-0010TE-500-5-0049TE-500-5-0089TE-SP4-45-175TE-SP1042TE-SP4-46-175TE-108-1-0610TE-SP1060TE-SP4-69-175TE-SP-49-13TE-SP-72-7TE-500-12-0040TE-SP-73-2TE-SP-71-9TE-500-12-0042

PlungerInternal CirclipO-RingO-RingSeal HousingWiper SealGuide BushM6 x 10 SHCS BlackHP Seal KitCylinder LinerCylinder BodyCheck Valve Housing LP Check Valve SpringCheck Valve PoppetSealing HeadO-Ring-BS033

Spare Parts and Tools

1

2

3

4

56

3

78

9

10

1112

13

14

15

16




QUANTUM DualTM Features

© 12

/202

0 A

LLFI

QUANTUM DualTM PumpHigh Pressure Pumps

SpecificationQuantum 74/66-D


Max. Flow Rate 7,6 I/m 2.0 Gpm

Cooling Water Consumption 12,0 I/m 3.2 Gpm

Footprint 2 x 1,08 x 1,36 m 78 x 42 x 50 in


• Easiest to Maintain – the superior design includes visual diagnostics, provides for easy, ergonomic access to the pump when maintenance is required and quick-change seal components allow for the fastest seal change in the industry • Most Efficient Waterjet Pump – Up to 60% more energy efficient than standard hydraulic intensifiers. Also, the much smaller footprint of the QUANTUMTM pump provides for efficient floor space utilization – over 50% less when compared to the average hydraulic pump • Superior Pump for Environmental Considerations – use up to 70% less cooling water than standard hydraulic intensifiers. This pump uses far less water and electricity to operate, combined with minimal oil usage compared to competitive products, makes it the best pump available for the environment • Most Cost Efficient – the combination of less overall downtime including unplanned downtime; fewer required component changes; fastest seal change timing; and requiring less electricity, cooling water and oil, all combine to make this pump the most cost-efficient high-pressure pump available • Industry 4.0 Ready – ALLFI technicians can provide remote assistance by logging into the pump to perform sophisticated diagnostics in real time




© 12

/202

0 A

LLFI

QUANTUM DualTM PumpHigh Pressure Pumps


Spare Parts

123456789

10111213141516

TE-SP-46-3TE-501-1-0010TE-500-5-0049TE-500-5-0089TE-SP4-45-175TE-SP1042TE-SP4-46-175TE-108-1-0610TE-SP1060TE-SP4-69-175TE-SP-49-13TE-SP-72-7TE-500-12-0040TE-SP-73-2TE-SP-71-9TE-500-12-0042

PlungerInternal CirclipO-RingO-RingSeal HousingWiper SealGuide BushM6 x 10 SHCS BlackHP Seal KitCylinder LinerCylinder BodyCheck Valve Housing LP Check Valve SpringCheck Valve PoppetSealing HeadO-Ring-BS033


1

2

3

4

56

3

78

9

10

1112

13

14

15

16




QUANTUM VPTM Features

© 12

/202

0 A

LLFI

QUANTUM VPTM PumpHigh Pressure Pumps

SpecificationQuantum VP 15/52


Max. Flow Rate 1,9 I/m 0,5 Gpm

Cooling Water Consumption 3,0 I/m 0,8 Gpm



• Easiest to Maintain – the superior design includes visual diagnostics, provides for easy, ergonomic access to the pump when maintenance is required and quick-change seal components allow for the fastest seal change in the industry • Most Efficient Waterjet Pump – Up to 60% more energy efficient than standard hydraulic intensifiers. Also, the much smaller footprint of the QUANTUMTM pump provides for efficient floor space utilization – over 50% less when compared to the average hydraulic pump • Superior Pump for Environmental Considerations – use up to 70% less cooling water than standard hydraulic intensifiers. This pump uses far less water and electricity to operate, combined with minimal oil usage compared to competitive products, makes it the best pump available for the environment • Most Cost Efficient – the combination of less overall downtime including unplanned downtime; fewer required component changes; fastest seal change timing; and requiring less electricity, cooling water and oil, all combine to make this pump the most cost-efficient high-pressure pump available




© 12

/202

0 A

LLFI

QUANTUM VPTM PumpHigh Pressure Pumps


Spare Parts

123456789

101112131415

TE-501-1-0010TE-SP1109TE-SP1115TE-SP1052TE-EL-72TE-500-5-0042TE-SP-71-7TE-SP-73-2TE-500-12-0040TE-EL-69-2TE-EL-49-2TE-SP1053TE-500-5-0065TE-500-5-0058TE-EL-46

Internal CirclipSeal Housing & Polyurethane PadGuide Bush Assembly with O-ringHP Seal KitCheck Valve HousingO-Ring- BS033Sealing HeadCheck Valve PoppetLP Check Valve SpringCylinder LinerCylinder BodyOil SealO-RingO-RingPlunger


15

1

14

13

12

6

2

3

4

11

10

5

98

7




Echion 15TM Features

© 12

/202

0 A

LLFI

Echion 15TM PumpHigh Pressure Pumps

Specification

Echion 15


Max. Flow Rate 1,1 l/min 0,3 Gpm

Cooling Water Requirements 11,4 L/min 3 Gpm

Footprint 1,35 x 1,09 x 1,01 m 53 x 43 x 40 inches

Weight 775 kg 1700 lbs

• Reversable Cylinders – Minimizes seal wear and improves component life • Hard Static Seal – Reduces maintenance cost through elimination of soft seal components and no specialized tools • Direct Sense Piston – Improves reliability and enables rapid stroke reversal to optimize system performance • Oil and Water Seal Access – Simplifies maintenance by locating seal access external to the center section • Fluid Routing - Captures intensifier leakage to help keep your floor clean• Color Touchscreen HMI – Reduced complexity for operator Easy screen navigation• Advanced Intensifier Monitoring – Enables quick determination of source of potential failures before they occur




© 12

/202

0 A

LLFI


Part Number Description Qty

Echion High-Pressure Water System

12345

1-18770 Echion High-Pressure Seal Repair KitRod Seal, Hydraulic, .875 inchO-Ring Backup, Seal Housing, -122O-Ring, Seal Housing, -122Seal Cartridge Assembly, High-PressurePoppet screw, Low-Pressure

22222

1234

1-18849 Echion Low-Pressure Poppet Repair KitWear Ring, Check ValveO-ring, Check Valve, -120Poppet Screw, Low-PressurePoppet, Low-Pressure

2222

1234

1-18771 Echion High-Pressure Poppet Repair KitCotton-Tipped ApplicatorPoppet, High-PressurePoppet Spring, High-PressurePoppet Seat, High-Pressure

2222


1-18770

1-18849

1-18771

4

1

2 5

3

1

2

3

4

1

2

3

4





© 12

/202

0 A

LLFI


Specification

Echion 30



Cooling Water Requirements 11,4 L/min 3 gpm

Footprint 1,35 x 1,09 x 1,01 m 53 x 43 x 40 inches






© 12

/202

0 A

LLFI




12345


22222

1234


2222

1234


2222


1-18770

1-18849

1-18771

4

1

2 5

3

1

2

3

4

1

2

3

4





© 12

/202

0 A

LLFI


Specification

Echion 50



Cooling Water Requirements 11,4 L/min 0,8 Gpm







© 12

/202

0 A

LLFI




12345


22222

1234


2222

1234


2222


1-18770

1-18849

1-18771

4

1

2 5

3

1

2

3

4

1

2

3

4

© 02

/202

0 AL

LFI




Specification

High Pressure PumpHigh Pressure Pumps High Pressure Pump

UH-HPS4011 UH-HPS4022 UH-HPS4037 UH-HPS4045 UH-HPD4075 UH-HPS6045 UH-HPD6090

Power[kw] 11 22 37 45 75 45 90

Max. Design Pressure[bar/psi] 4,150 / 60,000 6,200 / 90,000

Max. Operating Pressure[bar/psi] 3,800 / 55,000 5,300 / 77,000

HP-Accumulator Volume[l] 2

Max. Orifice Diameter[mm] 0.2 0.28 0.35 0.4 0.5 0.28 0.40

Orifice Constellation[mm] 3 x .012 2 x 0.20 2 x 0.25 2 x 0.28 2 x 0.30 1 x 0.28 2 x 0.28

Flow Rate[l/min] 1.2 2.3 3.8 4.2 7.5 3.0 6.0

Cooling System Oil-Aircooling System

Option • Temperature sensor for check valves and pressure relief valve• Water-cooling system

• Available in 4,150 bar/ 60,000 psi or 6,200 bar/ 90,000 psi• Guarantees high productivity• Maintenance-friendly equipment• Reliable high pressure intensifiers

*All dimensions are in (mm)*

Features

© 02

/202

0 AL

LFI




High Pressure PumpHigh Pressure Pumps High Pressure Pump

ALLFI pumps are compatible with any waterjet cutting system

• Suitable for every Waterjet-machine or robot cell• Special requirements for the connection of the High Pressure Pumps to the respective machine controls can be secured by means of a specially developed communication module • Connection of other pump types on an existing Waterjet machine upon request• Maintenance and service on all known High Pressure Pumps

ALLFI HP-Pump Connection to Waterjet Cutting System

High Pressure Pump - Spare Parts

© 02

/202

0 AL

LFI




High Pressure Pumps

Features• Fast availability and delivery with in estimated reaction time: 24hr• All essential parts are in stock and prepared to ship• Multiple warehouses at strategic locations provide speedy delivery and assistance• The services ALLFI provides allows for the ideal prerequisite for a reliable customer relationship

Spare Parts

Extract from a spare parts list for an ALLFI HP pump type UHDE 4037; 37 kW, 3800 bar/ 55114 psi

Pos. Article Article nr.Average Lifetime

hr.

Hydraulic

1 Replacement Element for Return Filter 05-120695 2000

HD-Unit 11-013248

2 Pump Body 11-011692 10000

2 Thrust Washer 11-011699 10000

2 Ceramic Plunger 11-012440 5000

2 Complete Guide Bush 11-012630 5000

4 Support Ring 80-047047 3000

4 O-Ring/O-ring 80-047046 3000

4 Guide Band - Brown 05-130524 2000

4 Piston Rod Seal - Blue 05-125000 1500

2 Piston Rod Seal 05-131051 1500

2 O-Ring/O-ring 05-130526 3000

2 Support Ring 05-130527 3000

© 02

/202

0 AL

LFI




High Pressure Pump - Spare PartsHigh Pressure Pumps

Spare Parts


Pos. Article Article nr.Average Lifetime

hr.

2 Guide Bush 11-011792 5000

4 Guide Band 05-130525 1500

2 O-Ring/O-ring 05-125426 5000

2 Support Ring 05-125427 5000

2 O-Ring/O-ring 05-125428 5000

2 Check Valve 05-130504 5000

2 Guide Band 05-125424 5000

2 Piston Seal 05-125425 5000

2 Quad-Ring 05-130522 5000

2 Support Ring 05-130523 5000

2 Complete Valve Cartridge 11-009662 5000

2 Valve Body 11-009497 1500

4 Ball 05-120260 1500

4 Set Screw 11-009499 3000

4 Valve Seat 11-015415 1000

2 O-Ring/O-ring 06-307011 5000

Plunger Seal 11-012278

2 Support Ring 11-008461 500

2 Seal Kit 11-012450 500

2 Pressure Ring 11-012117 200

High Pressure Pump - Spare Parts

© 02

/202

0 AL

LFI




High Pressure Pumps

Spare Parts


Pos. Article Article nr. Average Lifetimehr.

2 Bushing 11-012116 2000

2 Compression Spring 11-008840 1000

Cutting Water Filtration

1 Filter element R1F100; 10 ym 05-131252 2000

1 Filter element RM1F010; 1 ym 05-131253 2000

Pressure Relief Valve

1 Seal Kit incl. Needle 05-131508 2000

1 Valve Seat 05-131350 2000

Relaxation Session

1 Sapphire Ø0,50mm 05-120015 1000

1 O-Ring/O-ring 80-032736 5000

Controls

1 Pressure switch 1-16bar 80-042908 10000

2 Inductive Proximity Switch 05-130510 10000

1 Flat rate for unaccounted for parts / works

Total Amount Per Hour




High Pressure Pumps

© 08

/201

9 AL

LFI

Retrofit High Pressure Pumps

Retrofit PumpsALLFI has a wide range of retrofit high pressure pumps, waterjet cutting systems and other second hand equipment of well known and established brands available for purchase. On request, the pumps can be overhauled and/or modified to meet the specific requirements and wishes of the buyer.

The available products can be found on the ALLFI website at allfi.com/fundgrube.

FeaturesThe majority of the used high pressure pumps and tables are the following brands:

• Flow• BFT• Byjet• UHDE




Power by the Hour / Fixed Price for High Pressure Waterjet Service

© 12

/202

0 A

LLFI

JetAccess© High Pressure Pumps

• ALLFI service team is equipped with the knowledge and experience to support all waterjet customers with their high pressure needs.• ALLFI provides the desired pump pressure and flow for the existing waterjet process • Price according to utilization of pump pressure per hour• Flexible pricing based on customer needs• Redundancy packages available to guarantee maximum uptime• Servotechnology pumps to reduce operating cost on site• Remote support

JetAccess© - Delivery• Provision of high pressure pump• Including spare parts• Including maintenance and repair• 24 hours reaction time• Flexible pricing

hochdruckpumpen high pressure waterjet pumps

Documents