hks construction technology
TRANSCRIPT
www.hks-partner.com
HKSCONSTRUCTION TECHNOLOGY
RotoBox
XtraTilt
TiltRotator
The very best solution for all excavators
We Turn the World.
110° tilting
Use HKS Construction Technology products to boost the productivity of your attachments, and transform your carrier device into a multi-functional machine. The extended radius of action that your attachment can achieve means that a greater variety of work can be performed much more quickly, precisely and efficiently. We offer an ideal, needs-oriented solution for any application.
We tilt your attachments and buckets and get to rotate endlessly
110° tilting
Improved accessibility of operating positions thanks to rotating Immediate changeover from backhoe to face bucket by means of simple rotation
from page 18
Best possible accessibility of operating positions thanks to simultaneous tilting and rotating Spatial positioning enables previously impossible areas of application for your attachments
Further intermediate tilt angles available upon request.
combination
direct connectionsandw
ich s
olut
ion
n
Connecting directly to the bucket
With adapter to dipperstick connection and quick coupler
With quick-coupler adapter and quick coupler
RotoBox
TiltRotator
co
mbination sandwich solution
With adapter to dipperstick connection
and quick coupler
With quick-coupler adapter and quick coupler
from page 12
4
from page 6
Improved accessibility of operating positions by tilting Working on embankments has never been as easy
XtraTilt
co
mbination sandwich solution
with
lugs
with oil feedthrough
dire
ct c
onn
ecti
on
Connecting directly to the bucket
With lugs for direct connection
With Oil feedthrough
With permanent shaft connection and quick
coupler
With quick-coupler adapter and quick coupler
Further intermediate tilt angles available upon request.
Discover the broad diversity of HKS Construction Technology products, and use them to boost your productivity.
5
HKS XtraTilt
Details Standard rotating angles: 100°/140°/180° Holding torque of up to 165,000 Nm Operating pressure of up to 250 bar 87 models for 18 sizes for a carrier device weight of
up to 100 t Further tilting weights available upon request
Many years of experience and innovation have made the HKS XtraTilt even more robust, reliable and durab-le. Thanks to the special deflectors on both sides, dirt is prevented from entering the housing of the HKS XtraTilt range, making it maintenance-free from the day it lea-ves the factory. This feature considerably reduces main-tenance costs.
› Tilt up to 2 x 90°› One HKS XtraTilt for all attachments› An additional movement axis for greater versatility and flexibility
Fields of application Gardening and landscaping Embankment work Trench-digging Demolition work Civil engineering/road construction Backfilling work Foundation work Metering work Excavation work Work on inclined planes Hydraulic hammer and milling insert
Product advantagesMaintenance-free operation, since there is no need for re-lubrication and readjustment!
Unlimited flexibility: compatible with all quick couplers and carrier devices!
Less material excavation: narrower attachment tools can be used, considerably reducing the working width!
More precise operation: high holding torques and precise manufacture ensure the exact maintenance of the selected position!
Constant torque/holding torque: regardless of the operating angle.
Durability: protection against wear, tear and rust thanks to special manufacturing, annealing and hardening processes which give the robust welded housings the utmost accuracy of shape!
6
BVC
BVE BVF
BVD
1–11 t
10–100 t 12 t
1–10 t
▶ Long-term quality in the use of tilt buckets for excavator classes up to 11 t .
▶ Available tilt angles of 100°, 140° and 180°
Compared to the BVC at the same output: ▶ Lower space requirement ▶ Ideal fit for all commercially available quick couplers ▶ Regardless of the excavator hydraulics, thanks to
directly connected load-holding valve ▶ Only available with a tilt angle of 180°
▶ Operating pressure of up to 250 bar (alternative: 190 bar for tilt angle of 100°)
▶ Designed for biologically degradable media (dual seals)
▶ Reinforced shaft
▶ Oil feedthrough for hydraulic quick coupler ▶ Simplified installation ▶ No more torn or damaged hoses
The XtraTilt series
8
Our HKS XtraTilt range provides you with a durable, high-quality product "Made in Germany" with over a decade of experience in application and design.
HKS XtraTilt
Durable, robust, protected, powerful
The lack of maintenance saves servicing costs
Greater accessibility thanks to greater tilt angle
Simplified representation
Minimum working width Minimum working width
Damage to the cylinders caused bysoil, stones and dirt
Only suitable for trench buckets
Continuous re-lubrication and greasing of the cylinder
bearing necessary
Tilt head with bearing surfaces requiring
lubrication, time-consuming assembly
Over time, worn-out connection elements must
be replaced
HKS XtraTiltBucket with linear cylinder
x x3
~
Compact – fits all buckets and tools
Comparison with standard products
HKS XtraTilt components – made for continuous use
Surface-hardened pistonwith guiding element
Ultimate precision manufacture of paired interleaving
Surface-hardened and corrosion-resistant housing with screw or weld-type fastening on the feet
End flange with friction bearings, fastening thread and special deflector on both sides
Shaft with mounting flange and friction bearings all in one
Actuator centring on both sides for optimum power distribution
The right choice for harsh everyday conditions: the compact, four-part construction made from high-quality materials
and its high-precision manufacturing make the HKS XtraTilt the most robust rotary actuator in its class.
Tech
nica
l dat
a an
d di
men
sion
s
Excavator class (t) < 1.8 1.8–3.8 3–5.5 4–6.8 5–7.5 7–9 8.5–11 10–13 10–16 15–23 22–26 25–29 28–34 28–38 37–50 48–60 58–70 68–100
XtraTilt model/size 100 115 125* 130 140* 160 180 225* 240 250 260 270 290 300 350 400* 420* 450*
XtraTilt BV series C C D C D C D C C D F C E E E E E E E E E E E
Holding torque [Nm] 2,
480
7,30
0
4,30
0
7,80
0
8,20
0
10,0
00
on r
eque
st
10,9
00
17,5
00
17,5
00
on r
eque
st
19,5
00
36,7
00
40,0
00
47,3
00
53,0
00
63,0
00
80,0
00
on r
eque
st
90,0
00
100,
000
140,
000
165,
000
on r
eque
st
Operating pressure [bar]
190 190 210
190 210
190 190 190 210
190 190
250
190
250
190
250
190
250
190
250
250
190
250
190
250
190
250
190
250
Tilt angle
100°
140°
180°
100°
140°
180°
178°
100°
140°
180°
178°
100°
140°
180°
178°
100°
140°
180°
100°
140°
180°
178°
180°
100°
140°
180°
100°
140°
180°
100°
140°
180°
100°
140°
180°
100°
140°
100°
140°
100°
140°
100°
140°
100°
140°
100°
140°
100°
140°
Displacement [dm³]
0.18
0.25
0.32
3
0.28
4
0.39
9
0.51
3
0.52
7
0.38
5
0.53
8
0.69
3
0.84
0.58
0.81
3
1.04
5
on r
eque
st
0.69
6
0.97
4
1.25
3
1.14
7
1.60
6
2.06
4
1.91
on r
eque
st
1.42
1
1.98
9
2.55
7
1.89
2
2.46
4
3.0
2.34
5
2.59
1
3.33
1
2.51
9
2.46
8
3.19
7
3.29
3,51
9
3.76
5
4.11
5
4.23
9
on r
eque
st
5.74
2
6.27
7
7.96
9
8.47
9
9.51
2
13.3
26
10.8
84
15.2
38
Weight [kg] 19 21 22 42 47 52 43 51 57 62 61 59 64 70 85 94 103
87 95 104
114
121
135
149
166
188
207
182
186
206
202
236
264
269
301
334
374
365
555
622
696
760
1,24
0
1,42
6
1,40
3
1,65
5
A [mm] 150 220
220 220
275 270 300 300
290 320 382 382 405 450 490 490
570 608 760 800
B [mm] 152 187
192 212
232 227 250 266
273 290 327 328 353 380 400 400
478 515 620 680
C [mm] 197
221
245
264
306
344
275
267
305
345
275
267
305
345
291
337
383
291
337
383
360
319
371
423
350
404
455
354
412
470
368
430
492
420
482
460
534
524
540
612
565
641
675
800
707
835
Degree of protection IP-65 (hose proof in accordance with ISO 20653:2006-08 road vehicles). IP-67 (submersion) on request.
10
Technical illustrationHKS XtraTilt components – made for continuous use
All
wei
ghts
exc
lude
qui
ck c
oupl
er a
nd a
dapt
er t
o di
pper
stic
k co
nnec
tion.
* ) M
anuf
actu
re o
n re
ques
t
Furt
her
size
s an
d til
t an
gles
ava
ilabl
e on
req
uest
vert
rieb@
hks-
part
ner.c
omExcavator class (t) < 1.8 1.8–3.8 3–5.5 4–6.8 5–7.5 7–9 8.5–11 10–13 10–16 15–23 22–26 25–29 28–34 28–38 37–50 48–60 58–70 68–100
XtraTilt model/size 100 115 125* 130 140* 160 180 225* 240 250 260 270 290 300 350 400* 420* 450*
XtraTilt BV series C C D C D C D C C D F C E E E E E E E E E E E
Holding torque [Nm] 2,
480
7,30
0
4,30
0
7,80
0
8,20
0
10,0
00
on r
eque
st
10,9
00
17,5
00
17,5
00
on r
eque
st
19,5
00
36,7
00
40,0
00
47,3
00
53,0
00
63,0
00
80,0
00
on r
eque
st
90,0
00
100,
000
140,
000
165,
000
on r
eque
st
Operating pressure [bar]
190 190 210
190 210
190 190 190 210
190 190
250
190
250
190
250
190
250
190
250
250
190
250
190
250
190
250
190
250
Tilt angle
100°
140°
180°
100°
140°
180°
178°
100°
140°
180°
178°
100°
140°
180°
178°
100°
140°
180°
100°
140°
180°
178°
180°
100°
140°
180°
100°
140°
180°
100°
140°
180°
100°
140°
180°
100°
140°
100°
140°
100°
140°
100°
140°
100°
140°
100°
140°
100°
140°
Displacement [dm³]
0.18
0.25
0.32
3
0.28
4
0.39
9
0.51
3
0.52
7
0.38
5
0.53
8
0.69
3
0.84
0.58
0.81
3
1.04
5
on r
eque
st
0.69
6
0.97
4
1.25
3
1.14
7
1.60
6
2.06
4
1.91
on r
eque
st
1.42
1
1.98
9
2.55
7
1.89
2
2.46
4
3.0
2.34
5
2.59
1
3.33
1
2.51
9
2.46
8
3.19
7
3.29
3,51
9
3.76
5
4.11
5
4.23
9
on r
eque
st
5.74
2
6.27
7
7.96
9
8.47
9
9.51
2
13.3
26
10.8
84
15.2
38
Weight [kg] 19 21 22 42 47 52 43 51 57 62 61 59 64 70 85 94 103
87 95 104
114
121
135
149
166
188
207
182
186
206
202
236
264
269
301
334
374
365
555
622
696
760
1,24
0
1,42
6
1,40
3
1,65
5
A [mm] 150 220
220 220
275 270 300 300
290 320 382 382 405 450 490 490
570 608 760 800
B [mm] 152 187
192 212
232 227 250 266
273 290 327 328 353 380 400 400
478 515 620 680
C [mm] 197
221
245
264
306
344
275
267
305
345
275
267
305
345
291
337
383
291
337
383
360
319
371
423
350
404
455
354
412
470
368
430
492
420
482
460
534
524
540
612
565
641
675
800
707
835
Our experienced staff will gladly help you select the right rotary drive. Contact us at: +49 6053 6163-0
› Continuous rotating in both directions › One HKS RotoBox for all attachments› Even more freedom of movement thanks to an extended radius of action
Extend your action radius to 360° with the HKS RotoBox. This enables more flexible operation in a stationary position and additional fields of operation. Hydraulic tools requiring a large amount of oil can also be optimally used with the optional HKS oil feedthrough.
Fields of application Gardening and landscaping Trench-digging Demolition work Civil engineering/road construction Backfilling work Foundation work Work on drainage channels Undermining Hydraulic hammer and milling insert
(limited guarantee)
Details Torque of up to 12,000 Nm Up to 8 rotations per minute Operating pressure of up to 175 bar In 7 sizes for a carrier device weight of up to 50 t
HKS RotoBox
Product advantagesPrecise operation: exact maintenance of the selected position, thanks to low-backlash gears and precise holding torques
Great flexibility: compatible with all quick couplers and carrier devices
Faster operation: thanks to an endlessly rotating 360° action radius, your attachments achieve considerably more operating positions. For instance, by rotating the bucket a backhoe bucket can quickly be turned into a face bucket.
Long service life: thanks to high-strength steel casting and a worm drive gear running in oil, downtimes are minimised, and a high utilisation rate of your machine is guaranteed.
Durability: protection against wear and tear and rust, thanks to special manufacturing methods that give the robust welded housing the utmost accuracy of shape.
Cost savings: no additional rotator required for hydraulic tools.
› Continuous rotating in both directions › One HKS RotoBox for all attachments› Even more freedom of movement thanks to an extended radius of action
HKS RotoBox
The HKS RotoBox has a lower overall height than comparable products, therefore better sup-porting of the kinematics of the carrier machine.
HKS RotoBox
110° tilting
Technical illustration
HKS RotoBox model RB 30 RB 60 RB 110 RB 150 RB 200 RB 250 RB 330 RB 550
Excavator class (t) 2,0–3,5 3 -–6 5–11 10–15 14–20 19–25 24–33 32-50
Weight of oil feedthrough [kg] 7 13 24 28 28 46 102 245
Flow rate of oil feedthrough system at pressure difference ∆p = 10 bar (HLP 46 30 °C)*
42 [l/min] 52 [l/min] 130 [l/min] 160 [l/min] 160 [l/min] 200 [l/min] 360 [l/min] 500 [l/min]
Weight of RotoBox excluding rotary feedthrough [kg]
44 78 121 173 173 301 378 ~800
Permitted axial load max. [N] 95,000 100,000 150,000 200,000 210,000 400,000 600,000 850,000
Permitted radial load max. [N] 48,000 95,000 130,000 170,000 180,000 250,000 350,000 500,000
Torque @ 175 bar [Nm] 850 1,350 2,850 3,500 4,700 4,700 5,200 12,000
r/min @ l/min at max. 175 bar 8 @ 28 l/min 8 @ 28 l/min 8 @ 33 l/min 8 @ 45 l/min 6 @ 45 l/min 6 @ 45 l/min 5 @ 45 l/min 5 @ 82 l/min
Dimensions
A [mm] 112 237 281 300 268 280 300 355
B [mm] 176 133 159 183 215 226 257 300
C [mm] 425 445 517 554 580 635 720 880
D [mm] 180 275 320 360 330 440 508 600
H1 [mm] 134 156 177 209 204 249 269 320
H2 [mm] 171 198 239 267 262 322 345 400
Technical data and dimensions
*) The pressure losses indicated were ascertained in the flow of the rotary feedthrough in one direction. Pressure losses caused by attachments such as screw connections or hoses have not been taken into account.All weights exclude quick coupler and permanent shaft connection.
RB 200new
Our experienced staff will gladly help you select the right rotary drive. Contact us at: +49 6053 6163-0
› HKS oil feedthrough with 5 channels and power feedthrough as an optional extra› To enable your attachments to work at full capacity
HKS oil feedthrough
Product advantagesMaximum capacity for your hydraulic attachments
Wear-resistant, high-quality components
Your attachment has an operating pressure of up to 350 bar
Up to 500 l/min flow rate and extremely low pressure differential
Optimum adjustment to any quick coupler
Electric feedthrough with up to 12 connections of 2 amperes each
› HKS oil feedthrough with 5 channels and power feedthrough as an optional extra› To enable your attachments to work at full capacity
HKS oil feedthrough
Fields of application Grab Compacter Shovel separator Surface miller Shears Hammer and milling insert
(limited guarantee)
With the extra large HKS oil feedthrough, connected hy-draulic tools are supplied with a flow rate of up to 500l/min oil (pressure difference ∆p = 10 bar, (HLP 46 30 °C)*).
Only the HKS oil feedthrough can get the flow rate sup-plied by your carrier device to your attachment at the lo-west pressure difference. This feature enables your tools to operate at full capacity. Don’t make compromises – put your trust in HKS pro-ducts.
Also available with 3 oil feedthroughs and power feed-through.Specially designed solutions available on request!
*) The pressure losses indicated were ascertained in the flow of the rotary feedthrough in one direction. Pressure losses caused by attachments such as screw connections or hoses have not been taken into account.
Shovel separator Surface millerCompacter Grab
Full power for your applications
Technical data and dimensions
The unique design and special manufacturing process al-low for particularly large channels for greater passage and a low efficiency loss rate. The individual flow rates can be flexibly distributed using multiple connectors. The piping
can therefore be optimally adjusted and implemented to suit your carrier device.
Illustration of flow rates
HKS Oil feedthrough for HKS RotoBox model
RB 30 RB 60 RB 110 RB 150 RB 200 RB 250 RB 330 RB 550
Excavator class (t) 2.0–3.5 3–6 5–11 10–15 14–20 19–25 24–33 32–50
Weight of oil feedthrough [kg] 7 13 24 28 28 46 102 245
Flow rate of oil feedthrough system at pressure difference ∆p = 10 bar (HLP 46 30 °C)*
42 [l/min] 52 [l/min] 130 [l/min] 160 [l/min] 160 [l/min] 200 [l/min] 360 [l/min] 500 [l/min]
Variable connection options for the hydraulic pipes to the oil
feedthrough
Operating line #1
Operating line #2
Large rotary channels and pipes provide the optimum oil
feedthrough
*) The pressure losses indicated were ascertained in the flow of the rotary feedthrough in one direction. Pres-sure losses caused by attachments such as screw connections or hoses have not been taken into account.
RB 200
new
› 2 x 55° simultaneous tilting and endless rotating › One HKS TiltRotator for all attachments› You can achieve previously impossible operating positions
HKS TiltRotator
The HKS TiltRotator enables you to tilt your attach-ment ±55° (even higher on request) in both direc-tions and rotate endlessly at the same time. These two functions provide three-dimensional positioning easily and accurately, increasing your efficiency and productivity.
With its compact and robust tilt unit, the HKS TiltRotator is an incomparable alternative to conventional wider cylinder variants, which are prone to faults. An optimised HKS XtraTilt with extended torque and reduced overall height is used for the HKS TiltRotator.
Details Standard tilt angle of 2 x 55° (even higher on request)
Holding torque of up to 90,000 Nm Torque of up to 43,000 Nm In 10 models for a carrier device weight of up to 45 t. Up to 8 rotations per minute Modular system design
Fields of application Gardening and landscaping Embankment work Trench-digging Demolition work/ripper tooth Civil engineering/road construction Backfilling work Foundation work Metering work Excavation work Work on inclined planes Hydraulic hammer and milling insert
(limited guarantee)
Further intermediate tilt angles available upon request.
› 2 x 55° simultaneous tilting and endless rotating › One HKS TiltRotator for all attachments› You can achieve previously impossible operating positionsoperating positions
HKS TiltRotator
Photo: Erwin Bauer
More efficient machine utilisation rateExtended radius of action in a stationary position
Larger tilt angle
Attachment mounting with quick coupler from any stationary position of the carrier device
Increases the mobility of your attachmentsoptimises their range of operation
Reduces construction site costsLess re-adjustment of the vehicles saves time and fuel, reduces wear and tear to the machine
A narrower working width means less excavated material
Fewer maintenance requirements and less lubrication reduce downtimes
Increased machine utilisation rates of up to 40% shorten the amortisation period
Easy retrofitting of existing machinery thanks to compatibility with all quick couplers and carrier devices
Maximum accessibility and precise maintenance of the selected operating positions
More orders can be completed during the same amount of time
Indispensable for gardening and landscaping, drainage channel construction and civil engineering
Your HKS TiltRotator product advantages
Compact, robust, insensitive to dirt, powerful
Lower maintenance costs due to longer service
intervals
Greater accessibility thanks to greater tilt angle
Simplified representation
Damage to the cylinders caused bysoil, stones and dirt
Projecting, disturbing cylinders. Problems with
excavating
Continuous re-lubrication/greasing of the cylinder
bearing necessary
HKS TiltRotatorConventional models
x x2
~
Bearings susceptible to maintenance
Restricted tilt angle and angle-dependent tilt torque
Maintenance-free, strong friction bearings
Constant tilt torque, regardless of tilt angle
Minimum working width
Comparison with standard products
Minimum working width
Accessibility of operating positions
HKS TiltRotator 2 x 55° (+ 2 x 10°)
Tilt rotator with cylinders 2 x 45°Tilt rotator with cylinders 2 x 45°HKS TiltRotator 2 x 55° (+ 2 x 10°)
+10° +10°+10° +10°
RotationSide view
Tilt angleFront view
55°55°
45°45°
HKS TiltRotator model TR 20 TR 35 TR 60 TR 85 TR 110 TR 150 TR 200 TR 250 TR 330 TR 450
Excavator class (t) 2,0–2,5 2.4–3.5 3–6 5–8.5 8–11 10–15 14–20 19–25 24–33 32–45
allocated RotoBox with rotary feedthrough RB 30 RB 30 RB 60 RB 110 RB 110 RB 150 RB 200 RB 250 RB 330
on r
eque
st
Weight of oil feedthrough [kg] 7 7 13 24 24 28 28 46 102
Flow rate of oil feedthrough system at pressure differential ∆p = 10 bar (HLP 46 30 °C)*
42 [l/min] 42 [l/min] 52 [l/min] 130 [l/min] 130 [l/min] 160 [l/min] 160 [l/min] 200 [l/min] 360 [l/min]
Roto
Box
Weight of RotoBox excluding rotary feed-through [kg]
44 44 78 121 121 173 173 301 378
Permitted axial load max. [N] 95,000 95,000 100,000 150,000 150,000 200,000 210,000 400,000 600,000
Permitted radial load max. [N] 48,000 48,000 95,000 130,000 130,000 170,000 180,000 250,000 350,000
Torque @ 175 bar [Nm] 850 850 1,350 2,850 2,850 3,500 4,700 4,700 5,200
r/min @ l/min at max. 175 bar 8 @ 28 l/min 8 @ 28 l/min 8 @ 28 l/min 8 @ 33 l/min 8 @ 33 l/min 8 @ 45 l/min 6 @ 45 l/min 6 @ 45 l/min 5 @ 45 l/min
Dimensions
A [mm] 112 112 237 281 281 300 268 280 300
B [mm] 176 176 133 159 159 183 215 226 257
C [mm] 425 425 445 517 517 554 580 635 720
D [mm] 180 180 275 320 320 360 330 440 508
H1 [mm] 134 134 156 177 177 209 204 249 269
Xtr
aTilt
BV
C-R
allocated BVC-R model BVC-R 90 BVC-R 100 BVC-R 115 BVC-R 130 BVC-R 130 (more powerful version)
BVC-R 150 BVC-R 160 BVC-R 200 BVC-R 260
Tilt angle 110° 110° 110° 110° 110° 110° 110° 110° 110°
Amount of oil required per 6 sec. tilt time 3 l/min 5 l/min 6 l/min 13 l/min 17 l/min 20 l/min 30 l/min 36 l/min 72 l/min
Displacement [dm³] 0.288 0.413 0.563 1.227 1.665 2.003 2.53 3.598 7.249
Torque @ 210 bar [Nm] 1,700 2,600 3,500 8,000 9,200 10,500 15,000 21,000 43,000
Holding moment @ 210 bar [Nm] 5,000 7,500 11,000 18,000 22,000 28,000 38,000 50,000 90,000
Weight [kg] 27 35 59 87 100 115 144 203 388
TiltR
otat
or
Total weight of TR excluding rotary feedthrough [kg]
71 79 137 208 221 289 317 504 766
Dimensions
E [mm] 291 301 364 424 424 484 473 564 679
F [mm] 221 226 272 312 312 362 349 419 489
L [mm] 301 353 357 392 471 490 585 574 636
Technical data and dimensions
HKS XtraTilt BVC-R
HKS RotoBox
HKS oil feedthrough
HKS TiltRotator
Ove
rvie
w
HKS TiltRotator model TR 20 TR 35 TR 60 TR 85 TR 110 TR 150 TR 200 TR 250 TR 330 TR 450
Excavator class (t) 2,0–2,5 2.4–3.5 3–6 5–8.5 8–11 10–15 14–20 19–25 24–33 32–45
allocated RotoBox with rotary feedthrough RB 30 RB 30 RB 60 RB 110 RB 110 RB 150 RB 200 RB 250 RB 330
on r
eque
st
Weight of oil feedthrough [kg] 7 7 13 24 24 28 28 46 102
Flow rate of oil feedthrough system at pressure differential ∆p = 10 bar (HLP 46 30 °C)*
42 [l/min] 42 [l/min] 52 [l/min] 130 [l/min] 130 [l/min] 160 [l/min] 160 [l/min] 200 [l/min] 360 [l/min]
Roto
Box
Weight of RotoBox excluding rotary feed-through [kg]
44 44 78 121 121 173 173 301 378
Permitted axial load max. [N] 95,000 95,000 100,000 150,000 150,000 200,000 210,000 400,000 600,000
Permitted radial load max. [N] 48,000 48,000 95,000 130,000 130,000 170,000 180,000 250,000 350,000
Torque @ 175 bar [Nm] 850 850 1,350 2,850 2,850 3,500 4,700 4,700 5,200
r/min @ l/min at max. 175 bar 8 @ 28 l/min 8 @ 28 l/min 8 @ 28 l/min 8 @ 33 l/min 8 @ 33 l/min 8 @ 45 l/min 6 @ 45 l/min 6 @ 45 l/min 5 @ 45 l/min
Dimensions
A [mm] 112 112 237 281 281 300 268 280 300
B [mm] 176 176 133 159 159 183 215 226 257
C [mm] 425 425 445 517 517 554 580 635 720
D [mm] 180 180 275 320 320 360 330 440 508
H1 [mm] 134 134 156 177 177 209 204 249 269
Xtr
aTilt
BV
C-R
allocated BVC-R model BVC-R 90 BVC-R 100 BVC-R 115 BVC-R 130 BVC-R 130 (more powerful version)
BVC-R 150 BVC-R 160 BVC-R 200 BVC-R 260
Tilt angle 110° 110° 110° 110° 110° 110° 110° 110° 110°
Amount of oil required per 6 sec. tilt time 3 l/min 5 l/min 6 l/min 13 l/min 17 l/min 20 l/min 30 l/min 36 l/min 72 l/min
Displacement [dm³] 0.288 0.413 0.563 1.227 1.665 2.003 2.53 3.598 7.249
Torque @ 210 bar [Nm] 1,700 2,600 3,500 8,000 9,200 10,500 15,000 21,000 43,000
Holding moment @ 210 bar [Nm] 5,000 7,500 11,000 18,000 22,000 28,000 38,000 50,000 90,000
Weight [kg] 27 35 59 87 100 115 144 203 388
TiltR
otat
or
Total weight of TR excluding rotary feedthrough [kg]
71 79 137 208 221 289 317 504 766
Dimensions
E [mm] 291 301 364 424 424 484 473 564 679
F [mm] 221 226 272 312 312 362 349 419 489
L [mm] 301 353 357 392 471 490 585 574 636
Technical illustration
All
wei
ghts
exc
lude
qui
ck c
oupl
er a
nd a
dapt
er t
o di
pper
stic
k co
nnec
tion.
*) T
he p
ress
ure
loss
es in
dica
ted
wer
e as
cert
aine
d in
the
flo
w o
f th
e ro
tary
fee
dthr
ough
in o
ne d
irect
ion.
Pre
s-su
re lo
sses
cau
sed
by a
ttac
hmen
ts s
uch
as s
crew
con
nect
ions
or
hose
s ha
ve n
ot b
een
take
n in
to a
ccou
nt.
Our experienced staff will gladly help you select the right rotary drive. Contact us at: +49 6053 6163-0
TR 200
new
Sandwich solutionThe HKS sandwich solution enables an HKS TiltRota-tor to be equipped with a quick coupler instead of a fixed adapter to dipperstick connection, for instance, which means that the excavator driver can use the HKS TiltRotator like a standard attachment. The lower quick coupler is still responsible for the change-over of attachments.
FLEET MANAGEMENT. The HKS product can be used for your entire fleet.
ATTACHMENTS. Existing attachments can still be used without the need for conversion. At the same time, all attachments can be combined with the HKS product for all carrier devices.
INDEPENDENCE. The carrier device can still be opera-ted by untrained personnel with no TiltRotator/Roto-Box/XtraTilt experience.
NO TEAR-OUT FORCE LOSSES. The HKS product can be removed if necessary, and the carrier device works at full power upon start-up.
WEIGHT REDUCTION. Should the lifting load be too high for the carrier device, the HKS product can be removed for this extreme application.
QUICK COUPLER. Both mechanical and fully hydraulic quick-coupler systems can be used and combined. At the same time, it is also possible to use two different systems. The permanently pressurised locking mecha-nism complies with EU machinery directives.
Modular "TiltRotator"
Along with an HKS RotoBox or HKS XtraTilt in a sandwich design, you have combined a flexible, modular TiltRotator.
Levelling bucket with HKS XtraTilt as a tilting unit.
Quick coupler bolted to the dipperstick.
HKS RotoBox as a sandwich solution with quick coupler suspension and hydraulic quick coupler.
1
2
3Levelling bucket with HKS RotoBox as a rotation unit.
Quick coupler bolted to the dipperstick.
HKS XtraTilt as a sandwich solution with quick coupler suspension and hydraulic quick coupler.
1
2
3
24
Flexibly replaceable
Here are some examples of how the sandwich solution allows you to work flexibly. You can use the right tool for the work at hand, at any time. As a combination with or without HKS products.
HKS XtraTilt HKS RotoBox HKS TiltRotator
Quick coupler bolted to the dipperstick.
1
Backhoe
bucketGrabLevelling
bucket
Ripper tooth
An overview of HKS Construction Technology productsAll possible combinations • simply simple • simply great!
HKS XtraTilt HKS XtraTilt L version HKS XtraTilt K version HKS RotoBox HKS RotoBox K version HKS TiltRotator HKS TiltRotator K version
As a stand-alone deviceWith lugs for direct connection to
the bucket
With adapter to dip-perstick connection and quick coupler
With quick-coupler adapter and quick
couplerAs a stand-alone device
With adapter to dip-perstick connection and quick coupler
With quick-coupler adapter and quick
couplerAs a stand-alone device
With adapter to dip-perstick connection and quick coupler
With quick-coupler adapter and quick
coupler
Adapter to dipperstick connection (optional)Compatible with all excavators up to 100 tAlso available as a welded version or with a quick coupler adapter
HKS XtraTilt87 models in 18 sizes up to 100 t Tilt angle: 100°, 140° or 180°Holding torque of up to 165,000 Nm Optimised XtraTilt BVC-R model
Increased performance – lower overall height
Optimised XtraTilt BVC-R model Increased performance – lower overall
height
Oil feedthrough (optional)Flow rate of up to 500 l/min5 flow rate channelsOptional power feedthrough
HKS RotoBoxIn 7 sizes from 2 t to 50 tTorque of up to 12,000 NmUp to 8 rotations/min(with adapter board)
Quick coupler (optional)Compatible with all mechanical and hy-draulic quick couplers
Alternative:Welded connection from adapter to dipperstick connec-tion and XtraTilt for a more compact overall height.
26
HKS XtraTilt HKS XtraTilt L version HKS XtraTilt K version HKS RotoBox HKS RotoBox K version HKS TiltRotator HKS TiltRotator K version
As a stand-alone deviceWith lugs for direct connection to
the bucket
With adapter to dip-perstick connection and quick coupler
With quick-coupler adapter and quick
couplerAs a stand-alone device
With adapter to dip-perstick connection and quick coupler
With quick-coupler adapter and quick
couplerAs a stand-alone device
With adapter to dip-perstick connection and quick coupler
With quick-coupler adapter and quick
coupler
Adapter to dipperstick connection (optional)Compatible with all excavators up to 100 tAlso available as a welded version or with a quick coupler adapter
HKS XtraTilt87 models in 18 sizes up to 100 t Tilt angle: 100°, 140° or 180°Holding torque of up to 165,000 Nm Optimised XtraTilt BVC-R model
Increased performance – lower overall height
Optimised XtraTilt BVC-R model Increased performance – lower overall
height
Oil feedthrough (optional)Flow rate of up to 500 l/min5 flow rate channelsOptional power feedthrough
HKS RotoBoxIn 7 sizes from 2 t to 50 tTorque of up to 12,000 NmUp to 8 rotations/min(with adapter board)
Quick coupler (optional)Compatible with all mechanical and hy-draulic quick couplers
Special solutions available on request. Just contact us.
The facts at a glance:
Adapter board compatible with all quick couplers Dipperstick connection individually adapted for all carrier devices Can be used on all attachments
Legend: L = lugs • C = combination (adapter to dipperstick connection/quick coupler adapter and quick coupler)
HKS Control System
Precision engineering also requires control precision. HKS therefore offers a high-performance electrical control unit for its products to provide optimum support for the functions of the TiltRotator. Using the HKS control system you can tilt and rotate your attachments – if re-quired all at the same time and at the touch of a button.
Our developers have also ensured maximum system flexi-bility for the HKS control system.
Prop valve block
Valve block with proportional valves for precise control of the HKS TiltRotator. Can be installed in the upper structure or on the TiltRotator!
The control unit and cable set can easily be installed without the need to interfere with the on-board electrics: however, they can also be incorporated in the existing electrical system by a specialist workshop if required. The control system makes use of the existing hydraulic installation of the basic machine. Suitable for all hydraulic excavators with an on-board voltage of 12–24 V.
The optimally designed control system enables you to work with your HKS TiltRotator as if it were an extension of your arm.
HKS TiltRotator
Electrical cable set, including plug and switch
for establishing the connection between valves
and control unit.
Cable set
For the pilot control of a control circuit
Trigger valve
BTS 01 BTS 02 BTS 03
Tilting, rotating and extra function, all simultaneously
•- -
2
Tilting + rotating simultaneously, switching between tilting + extra function
-• •
2 2
Switching between tilting + rotating, extra function also simultaneously
-• •
2 2
Tilting + rotating simultaneously, without extra function
•- -
1
Switching between tilting + rotating, without extra function
-• •
1 1
• Useable HKS control system
2 Number of required control circuits on excavator
Legend:
Control system models:BTS 01: control systemBTS 02: external 6/2 way valveBTS 03: control block on RotoBox
HKS TiltRotator. Can be installed in the upper structure
28
Polarised connecting plug and solid design guarantee quick and easy fitting of the control unit. The robust plastic housing protects against dirt and moisture and is also short-circuit-proof.
Additional features:
Up to 16 users can be programmed Large function display All common proportional joysticks can be read in Software updates can be programmed via CAN bus
Control unit
The HKS JoyDapter turns a standard joystick into a proportional joystick without having to interfere with the machine control system. Fast installation, safe operation.
JoyDapter
Modern engineering products for thewhole world – “Made in Germany“ The HKS Group is a family-run company that operates throughout the world. Spread over two production sites in Germany, it employs over 180 staff, with a large number of sales partners all over the world and an export share of 50%. Founded in 1970, the mechanical en-gineering company produces hydraulic rotary actuators for industry, vehicle construction, mining, mobile hydraulics and marine tech-nology. The latest product development has been designed specifically for construction machine technology.
The third generation has been involved in managing this family-run company for more than four years, bringing innovation, flexibility and passion into the Group. State-of-the-art CNC machines are used to ensure the high-est product standards, based on 45 years of experience. With 30 years of experience in design and development under its belt, the company's core competencies also include customer-specific developments, making HKS products among the very best in the industry.
HKS develops, designs and produces to meet the highest standards, in order to fulfil all of its customers' requirements – without exception!
We regularly attend the major construction machinery trade shows so that you can see the HKS Construction Technology products live and in action. At the fairs, we present our products with various buckets and numerous other attachments (e.g. stone mills, compressor plates, hammers, grabs, etc.).
In addition to the trade shows, you can always make an appointment to test-drive an excavator on our demonstration terrain. We look forward to your [email protected]
Equipment for in-house exhibitions and demonstrations available on request.
Should you ever require help with our HKS Construction Technology products, we'll be on site within a short [email protected] +49 6053 6163-0
Always on the move
On-site service – immediate and friendly
30
Details about hydraulic excavator/carrier machineProduct
Technical information for adapter to dipperstick connection
Operating material (hydraulic medium)
Application information
Enquiry code/order codeWhen making an enquiry, please quote the order code by e-mail, fax or telephone.
Your data:
Distance (mm)
HKS Control System (see page 28)
BTS 01
BTS 02
BTS 03
Proportional roller onjoystick present?
yes no
Company: Tel:
Name: Fax:
Street: E-mail:
Code/City: Internet: www.
Model:
Serial No.:
Manufac-turer:
Load class: Year of construction:
Voltage: 12 V 24 V
No. of freehydraulic circuits on shaft: 1 2 3
Hammer line present? yes no
Hammer valve present? yes no
Load-holding valve (recommended for mini-excavators < 5 t)? yes no
Quick coupler hydraulic system present? yes no
Currently installed model of quick coupler:
Sandwich solution required? yes no
Secondmodel of quick coupler:
mechanical hydraulic fully hydraulic
Distance (mm)
Bolts Ø (mm)
Bolts Ø (mm)
Angle between tilt axis and bolt centre axis
BVC BVD BVE BVF
Tilt angle: 100° 140° 180° ______ Solo Lugs Combination
Oil feedthrough Power feedthrough
RB Solo RB-K
Tilt angle: 110°
Oil feedthrough Power feedthrough
TR Solo TR-K
Are hydraulic attachments used? yes noIf so, which ones?
Remarks:
Biological, if so, which:
Copyright 2015 HKS Dreh-Antriebe GmbH®
DIN EN ISO 9001:2008 TÜV-certified Illustrations are approximations. No guarantee for the information provided. Subject to changes.Version dated: March 2015
Leipziger Straße 5563607 Wächtersbach • GermanyTel.: +49 6053 6163-0Fax: +49 6053 6163-639
Learn more on our theme website:
More photos More videos More brochures More news More information
HKS CONSTRUCTION TECHNOLOGYHKS XtraTilt • HKS RotoBox • HKS TiltRotator
Your partner
www.better-without-cylinders.com
We Turn the World.