hinge
DESCRIPTION
DrzaciTRANSCRIPT
![Page 1: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/1.jpg)
www.scrollsawworkshop.blogspot.com
Digital Patterns
Designed bySteve Good
Home of Scroll Saw Pattern Printerand the Scroll Saw Key Chain Printer
Copyright Steve Good [email protected]
Note to commercial print employees: I give my permission to print as many of this pattern book as your customer requires.
![Page 2: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/2.jpg)
Cut blanks 1/4” Thick
Carefully drill hole in center.If it’s not centered you will have
trouble opening the hinge.
1/8” Drill bit.
![Page 3: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/3.jpg)
Use a #1 blade and cut thehinge on the pattern line.
![Page 4: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/4.jpg)
Round over the hinge and insert a 1/8” wooden dowel.
Notice I did not get the holecentered well in this hinge.
![Page 5: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/5.jpg)
Trim the dowel a little long.
Apply glue on each endof the dowel.
![Page 6: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/6.jpg)
I’m using ½” thick wood for the box soI trimmed the top of the hinge to fit the top.
Notice I sanded the dowel flush witheach side of the hinge.
![Page 7: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/7.jpg)
The hinge is glued to the backand top of the box.
The glue is probably enoughto hold the hinge in place butyou could counter sink small
brass screws for a better hold.
![Page 8: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/8.jpg)
Top of the box open.
![Page 9: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/9.jpg)
![Page 10: Hinge](https://reader030.vdocuments.us/reader030/viewer/2022020106/563dbb38550346aa9aab4b01/html5/thumbnails/10.jpg)
1/4” Thick