hiltap rapidlok family of products · butt weld *4. socket weld male *5. socket weld female ......
TRANSCRIPT
36
HILTAP™
For the Toughest High and Low Temperature and Pressure Applications The Hiltap™ Series features innovative high and low pressure and temperature sealing couplings, connectors and product recovery/pipeline cleaning technologies. For over a decade, Hiltap™ and the RapidLOK® family of products have served global industries, providing safe transfer solutions for some of the most difficult and demanding liquid applications.
Benefits of the Hiltap™ RapidLOK® Family:• Safely vents residual pressure
• Metal-to-metal wedge seal design for repeated use
• Leak-proof operation
• Operates through wide temperature/pressure ranges
• No variation in pipe diameter for most sizes
• Quality assurance to ISO 9001-2000
• Material traceability exists
• Canadian Registration Numbers (CRN)
This all-purpose, high-performance quick coupling offers a non-restrictive flow with no variation in pipe diameter when required and conditions allow. The reusable sealing components are made of different metals that have their own unique hardness and thermal properties so as to further enhance the seal as temperature changes are encountered. The sleeve retaining ring ensures safe venting at any residual pressure. The Hiltap™ brand offers front line solutions and allows design engineers to specify safe and environmentally responsible connections.
Hiltap™ RapidLOK™ Family of Products
37www.opw-es.com
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication. OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
HILTAP™
3TL Series – Transfer Loading Safety Quick Coupling The 3TL Transfer Loading Series is an all purpose high performance quick coupling designed for leak proof sealing through a wide range of temperatures. The design offers a non-restrictive flow with no variation in pipe diameter. The reusable metal-to-metal wedge sealing components further enhance the seal as temperature changes are encountered. The retaining ring ensures safe venting of any residual pressure.
Features & Benefits• Designed to replace hammer unions and conventional
CAM locking couplings
• Repeatedly reusable metal-to-metal wedge seal with secondary enviro O-Ring seal
• Non-restrictive flow characteristics for faster hook-ups
• Unique automatic safety feature vents residual pressure
• Only light torque required when tightening to contain rated pressure
• Designed and tested to ASME B31.3
• Available in 3/4" to 6" sizes
• Materials: 316 stainless steel and carbon steel
• Compact and available in any combination, of threaded, butt welded or socket welded ends
• Variety of sleeve handle options available
SizeNominal(Inch) (mm)
* For prolonged applications in temperatures above 500˚F (267˚ C) use of stainless steel coupling is recommended.
Working pressure PSISocket Thread ButtPressure ratings for 100˚ F 38˚C Sch.40
Outside diameter
(Inch) (mm)
Overall length
(Inch) (mm)
1.001.502.003.004.00
25.437.750.876.2
101.6
2.503.003.755.005.87
63.576.295.3
127.0149.2
2.754.004.505.505.50
69.8101.6114.3139.7139.7
Order Information 3 T L - 2 0 - I M N - D
1. Internally threaded (FNPT)*2. Externally threaded (MNPT) 3. Butt weld*4. Socket weld male*5. Socket Weld female
• Carbon steel A350/LF2. - D• Stainless steel 304/316/316L - A*• Other coatings (eg.) (Zinc, Cadmium, Teflon)Zinc coating standard on carbon steel products* All stainless austenitic steel sleeves undergo an anti-galling process
2" 3TL - 20 - 11 (Internal NPT threads)FEMALE COUPLING HALF (PLAIN END/SLEEVE ASSEMBLY)PART NR. HT3TL - 20 - 1X(F)
XW - WIDE GROOVEFOR SAFETY RING
DUST PLUGPART NR. HT3TH - 20 - DP
DUST CAPPART NR. HT3TL - 20 - DC
MALE COUPLING HALF (THREADED END)PART NR. HT3TL - 20 - X1 (M)
SECONDARYENVIRO "O"RING SEAL
STANDARD THREAD IS ACME G2 6 TPI
4.420 ASSEMBLEDSTAINLESS SAFETY RING
HEAVY DUTY
Ø4.
000
2˚ N
TP
2˚ N
TP
10 2
"
SLEEVE WITH HANDLES
Note: Other materials, sizes and pressure ratings are available.End caps/Plugs and dust caps are available.
Nominal size - 3/4 in. Sleeve/Male end thread type*10- 1.0 inches (25.4mm) 8 SA15- 1.5 inches (37.7 mm) 8 SA20- 2.0 inches (50.8 mm) 6 A30- 3.0 inches (76.2 mm) 4 A40- 4.0 inches (101.6 mm) 3 A60- 6.0 inches (152.4 mm)
Size Plain end Threaded end Material
Please contact Hiltap for detailed specifications
38
3IU Series High Performance Quality Impact Unions The Hiltap™ 3IU impact union does what a conventional hammer union does, only better.
OPW’s “impact union” is designed for leak proof operation over a wide range of temperatures and pressures. The reuseable sealing components offer a metal-to-metal wedge seal, as well as an additional O-Ring seal, targeting full compliance to the latest environmental laws.
Applications include: next to sensitive electronic equipment, e.g., most flow meters, modular skid “tie-ins,” high pressure gas/oil, meter/production flow production, gas distribution “tie-ins,” high axial load stresses, sour gas, unconventionally high pressures and high erosion/corrosion applications.
Features & Benefits• Contains fugitive emissions
• Easier installation, skid fabrication and maintenance
• Low profile
• Light weight
• Low impact/torque required to engage
• Repeatedly reusable metal-to-metal wedge seals
• Secondary O-Ring seal
• Available in butt weld end configurations only
• Available in 2", 3" and 4" sizes
• Carbon steel materials
SCH 80, 160 or XXH
Pipe Size Approx. Overall Length
2" 6.0"
3" 7.2"
4" 9.5"
Model: 3IUSpecification Example: 3IU - 20 - 33 (2" IMPACT UNION Both Ends Butt Weld, Carbon Steel)
3U Series – Medium Pressure and Temperate Quality UnionsThe 3U Series is an all-purpose light weight quality union designed for leak proof operation as it cycles through a wide range of temperatures. The design offers a non-restrictive flow with no variation in pipe diameter in most sizes. The reusable metal-to-metal sealing components further enhance the seal as temperature and pressure changes are encountered. The safety ring ensures safe venting of residual pressure.
PROCESS PIGGING PRODUCT RECOVERY TECHNOLOGIES PIPE, TUBING, AND HOSE COUPLING SEALING SOLUTIONS
Ground Joint Utility UnionSAFER Hose Connections
Size Plain end Threaded end Material
Order Information H T G J - 0 7 - 11 - C
3/4" 07- 0.750 inch (19.0 mm) 1. FNPT 2. Socket weld female
• Stainless steel 316/316L dual grade
Pipe size
(Inch) (mm)
* For prolonged applications in temperatures above 800˚F (427˚ C) use of stainless steel coupling is recommended.
Note: For other materials, sizes and pressure ratings, consult Hiltap. Seal caps/plugs and dust caps are available
Working pressure PSISocket Thread Butt Sch.40
Outside diameter
(Inch) (mm)
Overall length
(Inch) (mm)
3/4 (0.750) 19.0 Pressure ratings for 100˚ F 38˚C Please contact Hiltap for Specifications
Please contact Hiltap for Specifications
Please contact Hiltap for Specifications
Retaining RingThreaded End (Male Half)
O RingFemale half
NPT Thread
NPT Thread
Plain End
Sleeve COMPENSATION RING OPTIONAL "O" RING SEAL
PLAIN ENDFITTING
NPT THREAD
SLEEVE
NPT THREAD
THREADED END FITTING(MALE HALF)
FE
MA
LE H
ALF
AS
SE
MB
LY
HILTAP™
39www.opw-es.com
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication. OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
3U Series – Continued
The HGJ series utility union is a high-quality coupling for most steam, water and standard utility applications. The outer scalloped knurled sleeve is ergonomic and made out of a non-galling material, ensuring easy and repeatable connectabilty.
The HGJ series uses a commercially available O-Ring seal and is fully interchangeable with conventional ground joint unions.
• Contains fugitive emissions
• Designed to replace conventional boss-type ground joint style unions/couplings
• Low profile/light weight, easier installation and maintenance
• Reduced chance of galling
• Elastomeric O-Ring seal
• Only light torque required when tightening
• Designed and tested to ASME B31.3
• Available in 3/4" only
• Materials: 316 stainless steel
HGJ Ground Joint Utility Union – Safer Hose Connections
H G J - 0 7 - 1 N 1 N - A - 3 0 4 1 - V 7HGJ SERIES SIZE
07 - 3/4"FEMALEHALF X - None l - FNPT 3 - Socket Weld SC - Seal Cap
MALEHALF X - Female Half Only l - FNPT 3 - Socket Weld SC - Seal Cap
SST O-RINGFluorocarbon only
HILTAP DRAWING PACKAGE
Ordering SpecificationsNote: For other materials, sizes and pressure ratings, consult Engineered Systems. Seal caps/plugs and dust caps are available
HILTAP™
• Contains fugitive emissions
• Designed to replace conventional medium pressure unions/couplings
• Easier installation and maintenance
• Fully interchangeable with each other
• Low profile/light weight
• Reduced chance of galling
• Repeatedly reusable metal-to-metal wedge seal
• Unique automatic safety feature vents residual pressure during uncoupling should residual pressure remain
• Only light torque required when tightening to rated pressure
• Designed and tested to ASME B31.3
• Available in 1/4" to 2" sizes
• Materials: 316 stainless steel and carbon steel
• Compact and available in any combination of threaded, butt welded or socket welded ends
Features & Benefits
Features and Benefits
40
LQC Series - “Twister®” Locking Quick ConnectThe Twister® LQC is the next generation of quick couplings designed as an option to replace conventional cam & groove couplings that are used in critical service applications. The Twister® LQC is engineered to be used in conjunction with hoses and loading arms.
Features & Benefits• Rapid engagement, 1/4 twist on/off
• Low pressure or vacuum locking
• Coupling locks during uncoupling should residual or line pressure be present
• Smooth bore, ideal for pigging applications
• Commercially available O-Ring seals
• Optional snap-in customized handles for tight spots
• Built to B31.3 specifications to ISO 9001-2000 Quality Standards
• Pressure ratings equivalent to ANSI 150/300
• Available in ¾", 1", 2", 3", 4" and 6" nominal sizes
• Materials: 316 stainless steel, cold temperature carbon steel and aluminum
• Surpasses Occupational Health & Safety Section 188 (October 2003)
The Twister
HILTAP™
LQC Railcar Unloading Adaptor• Ergonomic connection to railcar
• Features LQC Adaptor for safe, easy connection
• Can be provided with other end connections
41www.opw-es.com
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication. OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
“Lite” Series Safety Seal Cap ANSI 800 and below
Lite Series Hose Half Assembly 390 Series
SaVD™ Lite Gate Valve 390 Series - Safe Vent & Drain Safety Seal Cap/Hose Half
Features & Benefits• The SaVD™ Safety Seal Cap is designed to replace high pressure bull
plugs used in venting and draining SAGD steam and heavy oil piping.
• Safety Seal Cap (with chain) can be retightened to seal
• Outer seal and locking threads are located OUTSIDE the wetted surfaces
• Valve mounted couplings halves can be safely rodded, steam cleaned, pressure purged with specially designed and CRN registered adapters.
• NACE materials of construction: Carbon Steel
• Solid Material Wedge, NO overlays
• Available in 3/4", 1", 1-1/2" and 2" sizes
• Available with butt weld, MNPT, or seal cap
1 Safe and tight stem seal by means of positive back seat and long life leak proof stuffing box design.
2 The T-head connect of stem and disc assuring easy seating operation.
3 Solid fully guided wedge reducing wear on seating surfaces.
4 Gland eyebolts facilitating packing maintenance. 5 Leak proof Body-Bonnet Joint Cavity to eliminate
the unwinding of the SS spiral metal. 6 Rolled-in seat to assure tight and effective seating.
1
2
3 6
4
5
• The RapidLOK® 415/425/490 series couplings can perform equal to the respective pipe schedules
• Repeatedly reusable metal-to-metal seal with an optional secondary enviro O-Ring seal
• No bolts, or hub clamps for faster hook-ups
• Unique automatic safety feature vents residual pressure
• No special heat treatment of seal rings required
• Only light torque required when tightening to rated pressure
• Compact and available in any combination, of threaded, butt welded or male socket welded ends
• Designed and tested to ASME B31.1 & B31.3
• Available in 3/4" - 2" sizes
• Materials: 316 stainless steel and carbon steel
415 Series, 425 Series, 450 Series Pipe Connecting: Safety Quick CouplingsThe 415/425/490 RapidLOK® Series Connector is an all-purpose lightweight quick coupling designed for leakproof operation at a wide range of temperatures. The metal-to-metal seal further enhances the seal as temperature changes are encountered. The safety ring ensures safe venting of any residual pressure.
HILTAP™
Features
42
Ordering Specifications (Complete Coupling, Female Half)
3TL - 30 - 1 N 1 N - A - 3010 - A A - D 2 - V7
FITTINGDESIGNATION3TL - 3 pc. Transfer LoadingH3U - 3 pc. Medium Pressure Union3IU - 3 pc. Impact Union3LB - 3 pc. Lube Blending390 - 3 pc. SCH 80 for SAVDL
PLAIN ENDCONNECTION TYPE1 - Female NPT2 - Male NPT3 - Butt Weld4 - Male Socket Weld5 - Female Socket Weld6 - Female BSP8 - Hose BarbSC - Seal Cap
THREADEDEND STYLEX - None (Female Half Only)1 - Female NPT2 - Male NPT3 - Butt Weld4 - Male Socket Weld5 - Female Socket Weld6 - Female BSP8 - Hose BarbSP - Seal Plug
THREADEDEND COATINGBlank if Female Half OnlyN - NoneA - Electroless Ni (High Phos)Z** - ZincE - Annodized RedF - Annodized Blue
MATERIALA - Stainless Steel A479-316/316L (SA)D - Carbon Steel A350 Gr. LF2 Cl.1 NACEH - Aluminum 6061-T6
O-RING MATERIALBlank for None. Only Metal to Metal SealV7 - Fluorocarbon 75D
PLAIN ENDCOATINGN - NoneA - Electroless Ni (High Phos)Z** - ZincE - Annodized RedS - Annodized ClearF - Annodized Blue
SLEEVE COATING CODEN - NoneA* - Electroless Nickle (High Phos)Z** - ZincE - Annodized RedS - Annodized ClearF - Annodized Blue
HILTAP DRAWING PACKAGE CODE3102 - 1/4" Couplings3103 - 3/8" Coupling3105 - 1/2" Coupling3107 - 3/4" SCH10 Coupling3158 - 3/4" SCH10 to 80 Coupling3001 - 1" SCH10 Coupling3310 - 1" SCH80 Coupling3002 - 1" SCH40 Coupling3015 - 1 1/2" SCH10 Coupling3113 - 1 1/2" 3P SCH80 Coupling3000 - 2" 3TL and 3U SCH40 and 80 Couplings3136 - 2" SCHXXS Impact Union with Hiltap Seal3010 - 3" 3TL and LB SCH40 Couplings2146 - 4" 3LB and 3TL SCH40 Coupling0554 - 4" 3LB SCH10 Coupling0536 - 6" 3TL SCH40 Coupling0058 - 2" SCH160 Impact Union with Hiltap Seal0057 - 2" SCH80 Impact Union with Hiltap Seal0070 - 2" SCH160 Impact Union with Flat Face Seal2034 - 3" SCHXXS Impact Union with Hiltap Seal3189 - 3" SCH80 Impact Union with Hiltap Seal0168 - 4" SCHXXS Impact Union with Hiltap Seal
NOMINAL SIZE02 - 1/4"03 - 3/8"05 - 1/2"07 - 3/4"10 - 1"12 - 1 1/4"15 - 1 1/2"20 - 2"25 - 2 1/2"30 - 3"40 - 4"60 - 6"
* All stainless steel sleeves are electroless nickel plated to prevent galling
** Zinc coating standard on all carbon steel products
THREADED END STYLEFOR 3010 PACKAGE ONLYN - Standard 3"S - Sanitary1 - 1 1/2"2 - 2"3 - 2 1/2"4 - 4"
PLAIN END STYLEFOR 3010 PACKAGE ONLYN - Standard 3"T - Single Groove TubingS - Single GrooveD - Double GrooveC - Compoflex Hose BarbE - 2 1/2" Single Groove
SLEEVE STYLEA - Loop Handle SleeveB - Wrench Flats SleeveC - Stick HandleD - Paddle SleeveE - Aluminum Loop Handle for 3" Coupling (Except if Wetted Parts are Aluminum then as Above)F - Lug Sleeve (Star Style)IU - Impact Union Style Sleeve for 3TLRK - Raised Knurled SleeveBH - Bar Handle Articulating SleeveHX - Hexagonal SleeveSW - Spanner Wrench Sleeve
HILTAP™ ORDERING SPECIFICATIONS
43www.opw-es.com
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication. OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
HT3 - 30 - X1 - D - 3010 - 25 - ZNC
* Zinc coating standard on all carbon steel products
FITTING DESIGNATIONHT3 - 3 pc. Union and Transfer Loading
HT3IU - 3 pc. Impact Union Male
THREADED END STYLEX1 - Female NPT
X2 - Male NPT
X3 - Butt Weld
X4 - Male Socket Weld
X5 - Female Socket Weld
X6 - Female BSP
X8 - Hose Barb
SP - Seal Plug
THREADED END COATINGBlank if No Coating Required
EN1 - Electroless Nickle Plating (High
Phos)
ZNC* - Zinc
MATERIALA - Stainless Steel A479-316/316L (SA)
D - Carbon Steel A350 Gr. LF2 Cl.1
NACE
H - Aluminum 6061-T6
HILTAP DRAWING PACKAGE CODE3102 - 1/4" Couplings
3103 - 3/8" Coupling
3105 - 1/2" Coupling
3107 - 3/4" SCH10 Coupling
3158 - 3/4" SCH10 to 80 Coupling
3001 - 1" SCH10 Coupling
3310 - 1" SCH80 Coupling
3002 - 1" SCH40 Coupling
3015 - 1 1/2" SCH10 Coupling
3113 - 1 1/2" 3P SCH80 Coupling
3000 - 2" 3TL and 3U SCH40 and 80 Couplings
3136 - 2" SCHXXS Impact Union with Hiltap Seal
3010 - 3" 3TL and LB SCH40 Couplings
2146 - 4" 3LB and 3TL SCH40 Coupling
0554 - 4" 3LB SCH10 Coupling
0536 - 6" 3TL SCH40 Coupling
0058 - 2" SCH160 Impact Union with Hiltap Seal
0057 - 2" SCH80 Impact Union with Hiltap Seal
0070 - 2" SCH160 Impact Union with Flat Face Seal
2034 - 3" SCHXXS Impact Union with Hiltap Seal
3189 - 3" SCH80 Impact Union with Hiltap Seal
NOMINAL SIZE02 - 1/4"
03 - 3/8"
05 - 1/2"
06 - 5/8"
07 - 3/4"
10 - 1"
12 - 1 1/4"
15 - 1 1/2"
20 - 2"
25 - 2 1/2"
30 - 3"
40 - 4"
60 - 6"
SPECIAL CUSTOMIZED DESIGNATIONStandard 3"
S - Sanitary
20 - With Special 2" NPT on 3"
25 - With Special 2 1/2" NPT on 3"
BAY - With Special Bayonet
Ordering Specifications (Male Half Only)
HILTAP™ ORDERING SPECIFICATIONS
44
LQC - 30 - 1 N 1 N - A - 3124 - A N - H -V7
FITTINGDESIGNATIONLQC - Locking Quick Connect
PLAIN ENDCONNECTION TYPE1 - Female NPT
3 - Butt Weld
5 - Female Socket Weld
SC - Seal CapMATERIALA - Stainless Steel A479-316/316L (SA)
D - Carbon Steel A350 Gr. LF2 Cl.1
NACE
H - Aluminum 6061-T6 O-RING MATERIALV7 - Fluorocarbon 75D
PLAIN END COATINGN - None
A - Electroless Ni (High Phos)
Z* - Zinc
E - Annodized Red
S - Annodized Clear
F - Annodized Blue
SLEEVE COATING CODEN - None
A - Electroless Nickle (High Phos)
Z* - Zinc
E - Annodized Red
S - Annodized Clear
F - Annodized Blue
SLEEVE STYLEA - Standard Wagon Wheel Sleeve with Plunger
HND - Wagon Wheel with Crank Handle Sleeve
LH - Loop Handle Sleeve (No Standard)
HILTAP DRAWING PACKAGE CODE3124 - 1", 2", 3", 4" Couplings
3122 - 6" Coupling
3109 - 4" LQC Closure for PIG Launcher
3098 - 2" and 3" LQC Closure for PIG Launcher
3095 - 2" LQC Closure for PIG Launcher
3216 - 3" LQC Closure for PIG Launcher
3075 - 6" LQC Closure for PIG Launcher
NOMINAL SIZE10 - 1"
20 - 2"
30 - 3"
40 - 4"
60 - 6"
* Zinc coating standard on all carbon steel products
MALE ENDCONNECTION TYPEX - None (Female Half Only)
1 - Female NPT
3 - Butt Weld
5 - Female Socket Weld
SP - Seal Plug
MALE END COATING - Blank if Female Half Only
N - None
A - Electroless Nickle (High Phos)
Z* - Zinc
E - Annodized Red
F - Annodized Blue
SLEEVE MATERIAL IF DIFFERENT FROM WETTED PARTSA - Stainless Steel A479-316/316L (SA)
D - Carbon Steel A350 Gr. LF2 Cl.1 NACE
H - Aluminum 6061-T6
Ordering Specifications (Complete Coupling, Female Half)
HILTAP™ ORDERING SPECIFICATIONS
45www.opw-es.com
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication. OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
Consult factory for odering specifications.
HTLQC - 30 - X1 - D - 3124 - 25 -ZNC
FITTINGDESIGNATIONHTLQC - Locking Quick Connect
MATERIALA - Stainless Steel A479-316/316L (SA)
D - Carbon Steel A350 Gr. LF2 Cl.1
NACE
H - Aluminum 6061-T6
HILTAP DRAWING PACKAGE CODE3124 - 1", 2", 3", 4" Couplings
3122 - 6" Coupling
3109 - 4" LQC Closure for PIG Launcher
3098 - 2" and 3" LQC Closure for PIG Launcher
3095 - 2" LQC Closure for PIG Launcher
3216 - 3" LQC Closure for PIG Launcher
3075 - 6" LQC Closure for PIG Launcher
NOMINAL SIZE10 - 1"
20 - 2"
30 - 3"
40 - 4"
60 - 6"
* Zinc coating standard on all carbon steel products
MALE ENDCONNECTION TYPEX1 - Female NPT
X3 - Butt Weld
X5 - Female Socket Weld
SP - Seal Plug
THREADED END COATING - Blank if no coating required
EN1 - Electroless Nickle Plating (High Phos)
ZNC* - Zinc
IP4 - IPC System 4
SPECIAL CUSTOMIZED DESIGNATION - Standard
S - Sanitary
HO - Tapper Down Connection
25 - With Special 2 1/2" NPT on 3"
Ordering Specifications (Male Half Only)
HILTAP™ ORDERING SPECIFICATIONS