high technology in insulation - · pdf filehigh technology in insulation we create new...

2015-16 CATALOGUE

SUBERLEVR

HIGH TECHNOLOGY IN INSULATION

SUBERLEVInsulation

R SUBERLEV®www.suberlev.com

THE MOST ECONOMICAL ENERGY IS THE ONE NOT

CONSUMED

HIGH TECHNOLOGY IN INSULATION

WE CREATE NEW STANDARDS

FOR A BETTER ENVIRONMENT

The concept of construction materials has remained unchanged for years. Only in recent times has there been a tendency towards modernization and technological development, paving the way for new elements and components that make for a real revolution in this field, such as SUBERLEV products.

SUBERLEVInsulation


3

TABLE OF CONTENTS

Primers, Waterproofing and Varnishespage 4 and 5 Primers and Polyurethane Membranes. page 6 Acrylic Membrane, Passable Varnish and Compaction Resin.page 7 Waterproof Varnishes, Anti-Graffiti Varnishes, and Fungilev Anti-Mold Varnishes

Insulation and Thermal Correctors page 8 and 9 Thermo-Interiors and Thermo-Façades.page 10 and 11 Anti-Bacteria Thermo-Interiors and Anti-Insect Thermo-Façades page 12 Thermo-Roof Shield and Thermo-Roof EPS. page 13 Thermo-Skylight Shield. page 14 Suber-Neopor page 15 Thermolev EPS and Flexilev. page 16 Sprayed Natural Cork. page 17 Fine Sprayed Natural Cork. page 18 Color Chart. page 19 Sprayed Cork Coloring Toner and Ext/Int Thermal Filler. page 20 and 21 Injected Thermosilit and Injected Thermolev. page 22 and 23 Thermal Film, Nano ceramic, Silver and Frost.

Anti-Radiation Insulation page 24 Anti-Radiation Paint SHIELD and Grounding page 25 Anti-Radiation Earphones and Shielding Curtain page 26 Anti-Radiation Cell Phone Case and Measuring Kits.

Suberlev Application Tools page 27 Injection Gun, Sprayed Cork and Gravity Pressure Gun.

Tools, Machinery and Complements page 28 Cork Spray Machines and Thermolev Mortars. page 29 Diamond Disc Concrete Sander/Polisher and Mixer.page 30 Façade Restoration Kit and Inspection Camera Kit. page 31 Solar Tube and Exhaust Fans.page 32 Anti-Condensation Lev-Filter and CO2 Humidity Sensors page 33 3 cv Suberlev Compressor and Moisture Meter.

Thermo graphic Cameras page 34 Measurement with Thermo graphic Report.page 34 Thermal Cameras.

In the certification process ISO 9001 quality ISO 14001 environment

Suberlev Products

Machinery

SUBERLEVInsulation


4

Acrylic Primer-Fixative for façades and roofs, which works as a super-penetrating sealant for lime, tempera, plaster, cement, fired clay or other surfaces. Used where maximum penetration is required, in addition to surface adhesion and solidification. Drying 1-2 hours Repaint 3-4 hours Yield 35-55 m2/L. Depending on surface absorptionDilution 4 parts water and 1 part fixative, depending on surface

absorption.

750 ml. 4 L 15 L

Ref. 001 Ref. 002 Ref. 003

SUBER-FIX

PRIMER MEMBRANE P.U. 750 ml. 4 L 15 L

Ref. 004 Ref. 005 Ref. 006

Water-based fixative assures anchoring of the polyurethane membrane to porous surfaces with poor adherence. Yield 5-8 m2/L.

Certified by AIDICO according to adhesion norm EN 1542 and waterproofing norm EN 1062.

NEW IMPROVED

FORMULA!!

FOR PROFESSIONAL USE ONLY

SUBERLEVInsulation


5

COLOR P.U. MEMBRANE 4 L 15 L

Ref. 010 Ref. 011

Water-based mono-component polyurethane liquid membrane, elastic, waterproofing, excellent quality for decks, roofs and exterior transit areas where isolating and preventing water leakage is necessary. Its perfect balance, elasticity-hardness allows it to form a continuous film without joints or seams. Yield On roofs or decks, apply 1.2 to 2.2 L/m2. Minimum

recommendation of 2-3 coats. Dry to the touch 6-8 hoursRepaint 10-12 hoursColor white, grey, red. Ral. chart Certified by AIDICO according

to adhesion norm EN 1542 and waterproofing norm EN 1062

COLORLESS P.U. MEMBRANE 750 ml. 4 L 15 L

Ref. 007 Ref. 008 Ref. 009

Water-based mono-component polyurethane liquid membrane, elastic, waterproofing, excellent quality for decks, roofs and exterior transit areas where isolating and preventing water leakage is necessary. Its perfect balance, elasticity-hardness allows it to form a continuous film without joints or seams.Yield On roofs or decks, apply 1.2 to 2.2 L/m2. Minimum

recommendation of 2-3 coats.Dry to the touch 6-8 hoursRepaint 10-12 hoursColor Transparent

NEW IMPROVED

FORMULA!!



SUBERLEVInsulation


6

PURE ACRYLIC MEMBRANE 4 L 15 L

Ref. 012 Ref. 013

Elastic waterproofing coating for decks, roofs, walls and exterior semi-transit areas where isolating and preventing water leakage is necessary. Its perfect balance, elasticity-hardness allows it to form a continuous film without joints or seams. Yield On façades apply 0.75 L/m2. On decks apply 1.2 to 1.8 L/m2 Dry to the touch 2-4 hoursRepaint 8-12 hoursColors Transparent

AGGREGATE COMPACTION RESIN 4 L 15 L

Ref. 016 Ref. 017

Specific water-based resin for mixing with aggregates and decorative stones, for simulating park and garden grounds, and around trees and on paths, thus creating passable grounds allowing pedestrian traffic; elastics and grounds that drain water; applied horizontally. Application Sprayed by spray gun or compressed kneading with aggregates. Yield 6-8 L of resin per each 100-125 kg of aggregate.Dry to the touch 8-12 hoursDry for traffic 24-48 hours

PASSABLE VARNISH 4 L 15 L

Ref. 014 Ref. 015

Thin-layer, water-based, colorless urethaned polyurethane varnish provides protection for waterproofing and elastic paints, in general, that are applied horizontally and must resist a high level of traffic without stickiness. Yield 6-8 m2/L.Dry to the touch 2-3 hours

SUBERLEVInsulation


7

INVISIBLE WATERPROOF VARNISH 750 ml 4 L 15 L

Ref. 020 Ref. 021 Ref. 022

Water-based waterproof varnish for application on exposed brick façades, monolayer mortars, and natural stone, to lend water-repellency. Colorless appearance. Yield 6-8 m2/L.Dry to the touch 2-3 hours

ANTI-GRAFFITI NANOTECHNOLOGY

FUNGILEV CLEANER FUNGICIDE

1 L 3 LRef. 023 Ref. 024

1 L 5 LRef. 025 Ref. 026

The anti-graffiti Nano protection is a fast, easy, ecological long-term solution to the problem of undesired paintings. One single coat of the anti-graffiti nano-technology makes it so the paint will not penetrate into the façade and it can be taken off very easily with a brush and water without leaving a trace, avoiding costly cleanups. Depending on the surface, paint and cleaning as performed. It does not change the appearance of the surfaces. Appearance: semi-matte, colorless depending on surface. Yield 8-10 m2/L.Dry to the touch 6-12 hours

Interior and exterior wall aqueous-based sanitizing cleaner with a broad spectrum of action against bacteria, yeasts, molds and algae. Very effective for the preparation and disinfection of contaminated surfaces, as a pre-treatment before applying paint, sprayed cork, etc... Yield Approximately de 6-8 m2/L.Application With brush, roller or spray, one or two coats, depending

on the degree of contamination.

ARTIFICIAL AND FAUX STONE VARNISH 4 L 15 L

Ref. 018 Ref. 019

Water-based varnish for application on façades, simulations with artificial stones and exposed brick faux stones, monolayer mortars, natural stone, to lend water-repellency and protection. Yield 6-8 m2/L.Dry to the touch 2-3 hoursColor Colorless satin

8

SUBERLEVInsulation

R

8

An excellent quality paint with very low thermal conductivity due to the inclusion of hollow micro-spheres and reflective pigments in its formula, based on nanotechnology, which provides energy savings, since it prevents thermal transfers, making it the ideal paint in warm climates as well as cold climates.

It is sound-absorbing, due to the micro-spheres working as sound dampers. Supplies thermal insulation and anti-condensation, as it does not promote thermal exchange. Interiors and exteriors. White color, possibility of making colors with water-based or universal dyes. Drying 1 hourRepaint 5-6 hoursYield 4-6 m2/L per coat Thinner Water. Dilution from 8-15% Application Brush, roller and suitable spray gun

4 L TR 15 L TR

Ref. 027 Ref. 028

4 L White 15 L White

Ref. 029 Ref. 030

Ref.031750 ml

Ref.032750 ml

Ref.033750 ml

Ref.034750 ml

Ref.035750 ml

Ref.036750 ml

Ref.037750 ml

Ref.038750 ml

THERMO-INTERIOR

AIDICO certified. According to standard UNE-EN 7783/2. Reaction to Fire norm UNE 23727:90 Acoustical absorption coefficient UNE-EN ISO 354:2004 LGAI Technological Center

NEW IMPROVED FORMULA!!

MORE ECOLOGICAL. LITTLE ODOR NON-DRIP PAINT

FINER FINISH

THERMAL PAINT PREVENTS HEAT FROM PASSING THROUGH IT, PREVENTING LARGE LOSSES OF ENERGY

+4 L white

+15 L white

THERMO PAINT SHIELD

WITHOUT

TERMAL PAINT

WITH TERMAL

PAINT

SUBERLEV®

9

THERMO-FAÇADES

An excellent quality paint with very low thermal conductivity due to the inclusion of hollow micro-spheres and reflective pigments in its formula, based on nanotechnology, which provides energy savings, since it prevents thermal transfers, making it the ideal paint in warm climates as well as cold climates.

It is sound-absorbing, due to the micro-spheres working as sound dampers. Supplies thermal insulation and anti-condensation, as it does not promote thermal exchange. Interiors and exteriors. White color, possibility of making colors with water-based or universal dyes.

NCS CHART COLORS by request. Drying 1 hourRepaint 5-6 hoursYield 5-7 m2/L per coat Thinner Water. Dilution from 8-15% Application Brush, roller and suitable spray gun

750 ml 4 L 15 L

Ref. 039 Ref. 040 Ref. 041

0,25 - 0,3 MM.

WALL SURFACE

MICRO-SPHERES

MICRO-COARSE COATING FILM


10 year

GUARANTEE


THERMO PAINT SHIELD

10

SUBERLEVInsulation

R

10

Plastic interior paint with thermal and anti-bacterial properties.

This is a plastic paint with an acrylic copolymer base formulation in an aqueous dispersion and Nano technological additives. Micro bacterial action: integrates silver ions that provide strength to the dry film of the paint applied against the growth of bacteria and mold.

Its special qualities of whiteness, coverage, application and peculiar little odor make it an ideal paint for public buildings, businesses, hospitals, residences, hotels, child care centers, schools, etc.

Surface anti-germ effectiveness JIS Z 2801 (ISO 22196:2007).

Technical Characteristics: Color Finish

White or NCS chart. Matte.

Thinner Water. Solids in weight 62%Drying 1 hour (20º C and 60% H.R.) Repaint 4-6 hours (20º C and 60% H.R.) Specific weight 1.60 ± 0.05 kg/L Yield 4 - 6 m2/L. VOCs Cat. a/BA 75/30 (2007/2010): 0.16 Washability Class 2 Application Brush, roller and suitable spray gun

4 L White 15 L White

Ref. 042 Ref. 043

ANTI-BACTERIA THERMO-INTERIORS

Product approval by EPA-FDA (USA) and international associations like SIAA (Japan)

Lasting surface protection of more than 5 years.


NEW PRODUCT!!

LITTLE ODOR NON-DRIP PAINT

FINER FINISH

THERMO PAINT SHIELD

SUBERLEV®

11

This is a thermal paint that repels all kinds of insects and mites. Thanks to its innovative polymeric microcapsule-based technology that allows for a slow release of repellants, miticides and insect growth regulators, permits high persistence and very low toxicity.

Anti-mosquito paint controls plagues in public health, veterinary medicine and food industry. Very effective for all kinds of insects. It is ideal everywhere that is highly affected by insects: indoors or outdoors of housing, offices, health centers, schools, etc.

Surface anti-germ effectiveness JIS Z 2801 (ISO 22196:2007).

Technical Characteristics: Color Finish

White or NCS chart. Matte.

Thinner Water.Solids in weight 60%Drying 1 hour (20º C and 60% H.R.) Repaint 4-6 hours (20º C and 60% H.R.) Specific weight 1.60 ± 0.05 kg/L. Yield 5 - 7 m2/L. VOCs Cat. a/BA 75/30 (2007/2010): 0.16 Washability Class 2 Application Brush, roller and suitable spray gun.

ANTI-INSECT THERMO-FAÇADES

4 L 15 L

Ref. 044 Ref. 045

Product approval by EPA-FDA (USA) and international associations like SIAA (Japan)

Long-lasting protection against insects between 3 to 4 years.


NEW PRODUCT!!

NON-TOXIC Eucalyptus oil-based natural product

Repels insects by releasing natural substances derived

from essential oils.

THERMO PAINT SHIELD

10 year

GUARANTEE

SUBERLEVInsulation


12

THERMO-ROOF SHIELD

THERMO-ROOF EPS

750 ml 4 L 15 L

Ref. 046 Ref. 047 Ref. 048

15 L

Ref. 049

Excellent quality waterproofing that acts as a protective shield on roofs and façades, offsetting solar radiation.

Aqueous phase coating with acrylic resins and top quality, state-of-the-art polyurethane with hollow micro-spheres and reflective pigments, up to 90% solar reflection for thermally insulating and heat-regulating ability (reduces indoor temperature of housing and industrial premises). Adhesion even to galvanized steel.

Reduces temperatures by 4º to 25º depending on exterior temperature and surface on which it is applied. Yield On façades apply 0.8 to 1.5 L/m2. On roofs apply from 0.8

to 2 liters m2, depending on application. (In various coats). Colors White and colors by request. Thinner WaterApplication Brush, roller and suitable spray gun.

Coating derived from Thermo-Roof Shield, with virgin EPS beads for greater thick coat insulation. Adhesion even to galvanized steel. Recommended Thermo-Roof Shield application between 0.6 and 1 L/m2 as a protective finish. Yield Between 2.2 L/m2 and 3.5 L/m2. Application With trowel or suitable spray gun.

Certified by the AIDICO TECHNOLOGICAL CONSTRUCTION INSTITUTE. AIDICO. according to regulations: UNE-EN 1542:2000 AND EN 1504-2:2004

THERMALLY WATERPROOFS AND

INSULATES

REDUCES HEAT BY 20% TO 40%

10 year

GUARANTEE

10 year

GUARANTEE

SUBERLEVInsulation


13

THERMO-SKYLIGHT SHIELD750 ml 4 L 15 L

Ref. 050 Ref. 051 Ref. 052

Skylights allow the passage of light, but also infrared radiation, which generates excessive heat, and ultraviolet rays, which damage furniture and goods that are exposed indoors, and bothersome glare.

The thermo-skylight paint manufactured by Suberlev, while properly waterproofing water seepage and standing firm against skylight ruptures, especially those made of glass or fiber, it also creates a frame in the shape of a continuous sheet without joints, and is extremely flexible.

At the same time it has the great capacity to isolate the entry of heat and ultraviolet rays in summertime. Just as in winter it keeps warmth from heating from escaping.

USES AND APPLICATIONS:

Waterproofing, minimizing sun glare and thermal insulation of skylights. Polycarbonate as well as fiber, glass, etc., and on normal previously primed surfaces. High weather and UV resistance. Passable (after 48-72 hours). Very flexible.

Waterproof W 3. 0.04 KG/(m2.h 0.5). According to standard UNE-EN AIDICO.

Complies with water permeability standards. Long lasting.Yield 0.8 a 2.5 Kg/m2, (depending on required opacity and

waterproofing needed in each case). Drying 4 to 10 hours at 20º c and 60% HR. Colors Translucent white and RAL colors. Thinner Water. Finish High satin.

NORMAL ROOF WITHOUT INSULATION

PREVENTS ENTRY OF HEAT IN SUMMER

PREVENTS LOSS OF HEAT IN WINTER

AIDICO certified according to adhesion norm EN 1542 and waterproofing norm EN 1062

10 year

GUARANTEE

SUBERLEVInsulation


14

E.T.I.C.S System SUBER-NEOPOR®

Testing according to standard. Adhesion regulation 1015-12 specification of thermal resistance according to regulation EN 12667

1139-CPD-1501/08

This innovative system of great Thermal insulation efficiency, together with the suitable thicknesses, allow obtaining unbeatable energy efficiency, for passive houses or of very low energy consumption.

Composed of Suberlev natural cork thermal putty adhesive. It is extraordinarily adhesive on any surface (including glass, stoneware tiles, or anything galvanized).

State-of-the-art Neopor plate is very breathable and provides maximum efficiency.

High fastening anchoring screws on exterior walls.

Finished and smoothed with thermal putty, ready for a decorative finish afterward with Thermo-Façade Paint or Suberlev fine sprayed cork.

8 mm 20 mm 40 mm 60 mmRef. 053 Ref. 054 Ref. 055 Ref. 056

Step 3 Step 4

Step 1 Step 2

TECHNICAL DATA:

Color Grey

Thermal conductivity (W/mK) Suber-Neopor 0,032 EN 12667

Thermal resistance (m²K/W) Thickness: 8 mm

Thickness: 20 mm

Thickness: 40 mm

Thickness: 60 mm

0,35 EN 12667

0,73

1,35

1,98

Thermal conductivity (W/mK) Thermal putty 0,059 EN 12667

Flexural strength (kPa) ≥ 100 EN 12089

Compression strength (kPa) ≥ 70 EN 826

Steam diffusion strength factor 30-70 EN 12086

Type of Reaction to Fire E EN 13501-1

Dimensions (mm) 1000 x 1200

Thicknesses (mm) 8 – 20 – 40 – 60

SUBERLEVInsulation


15

THERMOLEV EPS

EN-998-1

Designed for E.T.I.C.S MINERAL SYSTEMS THERMOLEV EPS is a mono-component mineral and virgin EPS bead system, which is mixed with 8 - 10 L. of water to obtain a lime-based thermal mortar. THERMOLEV EPS mortar may be used manually or with a spray machine. - Economical, safe and environmentally friendly. - Natural waterproofing and open to vapor diffusion (pleasant indoor climate without the appearance of mold on the walls) - Does not absorb water. - Breathes. - Superior interior and exterior insulating properties. - Improves room acoustics. - It is combined with next generation fiber mortars. -Thermal Insulation: 0.070 W/m.k Applied directly to mineral surfaces. Up to 12 cm without mechanical anchoring. Yield 2.8 kg per cm and m2. Packaging 11Kg 40-45L. sacks.

Ref.057

FLEXILEVRef.058

EN-998-1

Topcoat fiberglass mortar for protection and smoothing of thermal mortars in 2-4 mm coats, then applying Suberlev thermal paint as finish in white or a range of NCS chart exterior colors (please consult with the technical department first). Mix only with 4.5 - 5 liters of clean water per 25 kg. Packaging 25 kg.Yield between 1.8 to 2.2 kg x mm and m2

SUBERLEVInsulation


16

SPRAYED NATURAL CORK Ref. 16 L

Ref. 059 CP-01Ref. 060 CP-02Ref. 061 CP-03Ref. 062 CP-04 Ref. 063 CP-05Ref. 064 CP-06Ref. 065 CP-07Ref. 066 CP-08 Ref. 067 CP-09 Ref. 068 CP-10 Ref. 069 CP-11 Ref. 070 CP-12Ref. 071 CP-13

Ref. 16 L

Ref. 072 CP-14 Ref. 073 CP-15 Ref. 074 CP-16Ref. 075 CP-17Ref. 076 CP-18Ref. 077 CP-19Ref. 078 CP-20Ref. 079 CP-21 Ref. 080 CP-22Ref. 081 CP-23Ref. 082 CP-24Ref. 083 CP-25

AIDICO certified according to adhesion norm EN 1542 and waterproofing norm EN 1062

Acoustical absorption coefficient UNE-EN ISO 354:2004 LGAI Technological Center

NEW FORMULA!!

Natural, high quality, thin layer and seamless coating with decorative finish in 25 colors for façades and roofs. Its application on surfaces provides thermal improvement (to cold and heat), acoustic improvement at three levels (to airborne noise, impact and reverberation) and waterproofing (to rainwater). It is breathable, non-skid, breathable, and very resistant to the elements and UVA rays. - Adhesion to a multitude of surfaces, such as: galvanized steel, glass, PVC, aluminum, mosaic tiles, concrete, etc. - Medium grain = 0.4 - 0.9 mm. - High flexibility, elasticity and durability over time. - Decoration, thermal insulation, etc. - Waterproof with the SUBERLEV IMP system - Encapsulation of asbestos cement (UNE-EN ISO 11507:2007). - Thermal conductivity: 0.059 W/mºK (EN 12667). - It can be sanded, varnished, painted, tiled, used for plastering or left as applied. *Product packaging: in 25 colors and NCS chart. Containers of 12 kg 16 L + - 5% depending on color. Yield 6 to 10 m2 finished per 16L containers.

Depending on surface and application required. 1 kg of product = 1.30 mm thickness/m2.

Dilution 100 to 200 ml of water.

10 year

GUARANTEE

SUBERLEVInsulation


17

FINE SPRAYED NATURAL CORK

Ref.16 L

Ref. 097 CP-14 Ref. 098 CP-15 Ref. 099 CP-16 Ref. 100 CP-17Ref. 101 CP-18Ref. 102 CP-19Ref. 103 CP-20Ref. 104 CP-21 Ref. 105 CP-22Ref. 106 CP-23Ref. 107 CP-24Ref. 108 CP-25

Ref.16 LRef. 084 CP-01Ref. 085 CP-02Ref. 086 CP-03Ref. 087 CP-04 Ref. 088 CP-05Ref. 089 CP-06Ref. 090 CP-07Ref. 091 CP-08 Ref. 092 CP-09 Ref. 093 CP-10 Ref. 094 CP-11 Ref. 095 CP-12Ref. 096 CP-13

Natural, high quality, thin layer and seamless coating with decorative finish in 25 colors for exteriors and interiors. Its application on surfaces provides thermal improvement (to cold and heat) and acoustic improvement at three levels (to airborne noise, impact and reverberation) It is very breathable for humidity by capillarity.

- Fine grain = 0.1 - 0.4 mm.

- Adhesion to a multitude of surfaces, such as: paints in good condition, plaster, concrete, etc.

- Thermal conductivity: 0.059 W/mºK (EN 12667).

- It can be sanded, varnished, painted, tiled, used for plastering or left as applied.

*Product packaging: in 25 colors and NCS chart.

Containers of 12 kg and 16 L + - 5% depending on color. Yield 7 to 11 m2 finished per 16L containers.

Depending on surface and application required. 1 kg of product = 1.15 mm thickness/m2.

Dilution 100 to 200 ml of water.

Certified by AIDICO according to adhesion norm EN 1542. Reaction to Fire norm UN 23727:90 Acoustical absorption coefficient UNE-EN ISO 354:2004 LGAI Technological Center

NEW FORMULA!!

10 year

GUARANTEE

SUBERLEVAislamientos

R SUBERLEV®TARIFA DE PRECIOSwww.suberlev.com

18 1918

COLOR CHART

The colors made with fine cork may have differences compared to the average roof and façade cork.

CP-14

CP-01 CP-02 CP-03 CP-04 CP-05

CP-06 CP-07 CP-08 CP-9 CP-10

CP-11 CP-12 CP-13 CP-15

CP-16 CP-17 CP-18 CP-19 CP-20

CP-21 CP-22 CP-23 CP-24 CP-25

SUBERLEVAislamientos

R SUBERLEV®TARIFA DE PRECIOSwww.suberlev.com

18 19

SUBERLEV®

19

THERMAL FILLER 4 L 15 L

Ref. 133 Ref. 134

Thermal filler of extraordinary quality with natural cork grains and fiberglass for coating exterior walls and indoors for filling and smoothing of stuccoed walls and other imperfections. Highly adhesive on challenging surfaces, perfect for moving dilation cracks, breathable and easily applied with a trowel.

Provides thermal and acoustic properties to the surfaces where it is applied.

- Adheres to a multitude of surfaces (stoneware tiles, glass, cement, etc.).

- Adhesive for insulation plates.

- Easy application with trowel and palette knife.

- High elasticity.

May be dyed with sprayed cork toner coloring.Testing according to standard.

Adhesion regulation 1015-12 specification of thermal resistance according to regulation EN 12667

COLORING TONER

Coloring for sprayed cork. One 1L canister to dye a canister of sprayed cork depending on color and base (there may be slight differences in color between the interior and exterior cork).Yield One 1L canister of toner for 16 L of sprayed cork.

Ref. 1 LRef. 121 CP-13Ref. 122 CP-15 Ref. 123 CP-16Ref. 124 CP-17Ref. 125 CP-18Ref. 126 CP-19Ref. 127 CP-20 Ref. 128 CP-21Ref. 129 CP-22Ref. 130 CP-23Ref. 131 CP-24Ref. 132 CP-25

Ref. 1 LRef. 109 CP-01Ref. 110 CP-02Ref. 111 CP-03Ref. 112 CP-04 Ref. 113 CP-05Ref. 114 CP-06Ref. 115 CP-07Ref. 116 CP-08 Ref. 117 CP-09 Ref. 118 CP-10 Ref. 119 CP-11 Ref. 120 CP-12


SUBERLEVInsulation


20

INJECTED THERMOLEV

INJECTED THERMOSILIT

Ref.136

Ref.135

Interior wall

Exterior wall

I N J E C T E D THERMOLEV

Chamber

Testing according to standard EN933-1.

Specification of thermal resistance according to regulation EN 12667 and EN10973

Pending marking

1130-cpd-1501/08

Dry insulation for filling air chambers, suspended ceilings and roofs of finished housing with insulation deficiencies. Injected Thermolev is an innovative product made from virgin EPS beads, rigid expanded volcanic rock balls and 1-4 mm natural binding agents that do not absorb water and are fireproof and rot-proof. Widely used in Central Europe for its excellent insulating ability and savings in its application as well as in the product. For making thermo-insulating cement mixes. Filling for spaces, in general. High thermal insulation Testing according to standard EN933-1. It is a lightweight aggregate that does not absorb water according to standard EN13055-1. Thermal according to standard EN 12667 Thermal conductivity: In bulk = 0.040 W/m.K..Yield For surfaces of 4 m2 with 0.05 m (5 cm) thickness,

200 L of material is consumed, equal to 1 unit (sack) of Thermolev.

Volcanic sand mineral insulation, thermally expanded, used for filling air chambers, suspended ceilings, roofs, etc. where insulation with an ecological product is a priority. Lightweight aggregate, high thermal insulation and waterproofing, according to standard EN 13055-1

Thermal conductivity: 0.046 W/mK. Class A1

Grain size: 2 mm. Density: 80-100 kg/m3.

Packaging 100L 1 pallet = 15. Sacks = 1.5m3

SUBERLEVInsulation


21

Check the chamber to be injected and measure the cubic capacity of the product to be used.

Drill holes with a drill bit of equal size or greater than the nozzle of the injection gun.

Begin injecting the chamber or suspended ceiling until it is filled with the product and plug the holes.

The injection of THERMOLEV only requires making a few holes on the wall face and does not require a large construction project on the home.

APPLICATION

SUBERLEV COMPRESSOR 3 CV SPECIAL INJECTION GUN

SUBERLEVInsulation


22

SPECIAL RUBBER SQUEEGEE FOR APPLICATION OF THERMAL FILM Ref.139

NANOCERAMIC THERMAL FILM Whole roll For more than 4 m/lineal Ref. 137 Ref. 138

Transparent Nano ceramic window insulation film.

New nanotechnology-based film technology, ceramic microspheres, applied to the interior of windows and glass doors, keeping out heat coming from excessive summer solar radiation and keeping in heat from our climate control in winter.

Suberlev thermal films work and are effective both in summer as well as winter.

Format: 1.52 m x 30 m/linear = 45.6 m2

Special squeegee for applying Suberlev thermal film, perfect value for money, easy application, non-scratch rubber.

Solar energy

Heat

Visible light

UV

IR

Heat source

1%

20%

Keeps out up to 80% of the solar energy and glare

Summer

Winter

Prevents up to 20% of interior heat from escaping

Check of effectiveness. Heat leakage in windows

99%

80%

SUBERLEVInsulation


23

SILVER THERMAL FILM

FROST THERMAL FILM

Whole roll For more than 4 m/lineal Ref. 140 Ref. 141

Whole roll For more than 4 m/lineal Ref. 142 Ref. 143

Thermal insulation film (concealment), mirror effect on windows.

New nanotechnology-based film technology, applied to the interior of windows and glass doors, preventing heat from solar radiation and keeping heat from escaping.

Rolls of 152 cm x 30 m/linear = 45.6 m2

Thermal insulation film (concealment), mirror effect on windows.

New nanotechnology-based film technology, applied to the interior of windows and glass doors, preventing heat from solar radiation and keeping heat from escaping.

Rolls of 152 cm x 30 m/linear = 45.6 m2

This new Nano ceramic technology, applied to film, takes advantage of the product benefits for optimal window insulation, in winter as well as in summer.

APPLICATION INSTRUCTIONS

CLEANING

POSITION FILM

CUTTING SPRAY WITH WATER

SPRAY WITH WATER REMOVE WATER TRIM EDGES

REMOVE PROTECTOR

SUBERLEVInsulation


24

ANTI-RADIATION PAINT

750 ml 4 L

Ref. 144 Ref. 145

Water-based anti-radiation paint for shielding wall, ceiling and floor surfaces, both for exterior as well as interior. Repaintable with water-based paints.

New technology for shielding that prevents radiation from the outside and from your own home, eliminating high and low frequency radiation and redirecting it to ground. Protecting those who live there from the entrance and frequent exposure to radiation.

Guaranteed efficiency. Drying 6-8 hours Repaint 10-12 hours. Two cross coats with a brush are

recommended.Yield from 4 to 6 m2 per liter and coat.

antes después

INTERIOR GROUNDING Ref. 146

- Ground wire for interior walls painted with shielding paints.

- To be screwed onto a painted wall, conductive tape previously applied.

- One ground wire per room is needed. Discontinued walls require one ground wire per section. Large rooms may require more than one ground wire.

- Grounding must be connected by an electrician.

- 1 m. ground wire.

SUBERLEVInsulation


25

NATURE SHIELDING CURTAIN

Special cotton fabric with silver-plated copper thread shielding microfilaments to make curtains, blinds, etc. For shielding and protection of windows and doors that are exposed to both low and high frequency radiation.

- Sewable, washable, ironable.

ANTI-RADIATION EARPHONES Ref.147

Surely you have heard that cell phones and other portable devices are harmful to your health due to the radiation they emit. People have become aware that micro radiation is harmful to us and to our environment, yet no one wants to give up their Smartphone, which has become indispensable now-a-days

• They work perfectly with all Smartphones, tablets, mp3 players and any device with a 3.5 mm connector jack.

• Remote button to receive and disconnect calls, with an integrated high quality microphone.

• Designed with high definition sound.

• Reduces dangerous electromagnetic radiation by 98%.

Ref.148

SUBERLEVInsulation


26

- Cell phone case protects against electromagnetic radiation.

- Reduces radiation by 98% when the cell phone is in the case.

- Prevents direct radiation to your head when you are talking on the phone, in such a way that there is a shielding case between the cell phone and your ear. In this way, coverage is not lost.

-Prevents direct radiation between the cell phone and your body when you carry it in your pants pocket, on your belt, etc. Creates an impermeable radiation shield between your body and the cell phone.

Certified by the ITE Institute.

SPECIAL ANTI-RADIATION CELL PHONE CASE Ref.149

HIGH AND LOW FREQUENCY ELECTRIC FIELD MEASURING KIT

PROFESSIONAL MEASUREMENT

Ref.150

Low frequency electromagnetic radiation measurement device (electricity network, transformers, etc.).

Range of frequencies: 16 Hz - 2 kHz.

Ref.151

High frequency electromagnetic radiation measurement device (mobile telephones, Wi-Fi, etc.), with acoustic signal.

Range of frequencies: 800 MHz - 2.5 GHz.

Ref.152

High and low frequency professional measurement with results report and recommendations.

WITHOUT PROTECTION WITH PROTECTION

SUBERLEVInsulation


27

SPECIAL INJECTION GUN Ref.153

Special design for injecting THERMOLEV between chambers and suspended ceilings, large flow of insufflation, built-in air regulator, ergonomic and good value for the money.

Five-liter tank.

Special injecting hose, 3-meter venturi effect.

SPRAYED CORK APPLICATION GUN Ref.154

Specially designed by the SUBERLEV technical staff together with gun manufacturing engineers, special application of sprayed cork, air valve, large input and output product flow, stainless steel needle. Air regulation, quick plug, trigger setting, ergonomic, equipped with a 45º elbow to facilitate application on floors and ceilings, excellent value for money.

Specially designed by the SUBERLEV technical staff together with gun manufacturing engineers, special application of sprayed cork, air valve, large input and output product flow, stainless steel needle. Air regulation, quick plug, trigger setting, ergonomic, and excellent value for money.

SPECIAL SUBERLEV SPRAYED CORK PRESSURE GUN Ref.155

Ref.156

SPECIAL MORTAR SPRAY LANCE

Special lance for applying Suberlev thermal mortars, equipped with quick geka type plugs and airflow regulation.

SUBERLEVInsulation


28

CORK SPRAY MACHINE AND SUBERLEV MORTAR

THERMAL MORTAR APPLICATION MACHINE

40 BAR 10-METER HOSE

Ref.158

Ref.159

3/4 HoseRef. 160

1” HoseRef. 161

Specially designed machine, with specific adaptations, for applying Suberlev sprayed cork. Machine and product impulse pump, only needs a compressor and a 220v socket. Weight 35 Kg.

Twenty-liter bin capacity, 10 m hoses, product and air, yields approximately 700-800 m2/day, two operators. Suitable for applying Thermal Paint, Thermal Waterproofing, sprayed cork and mortars. Equipped for cork.

Specially designed machine, with specific adaptations, for applying Suberlev thermal mortar. Machine and product impulse pump, four totally detachable pieces. Power 3.3 kw to 230 v. Weight 161 Kg. Flow of 7-35 L/min or 2-20 L/min. 10 m hose and application lance.

Special ¾ hose for sprayed cork with geka type coupling.

Special 1” hose for thermal mortars with geka type coupling.

INDUSTRIAL SPRAYED CORK APPLICATION MACHINE Ref.157

Specially designed machine, with specific adaptations, for applying Suberlev sprayed cork. Separate machine, integrated compressor and product impulse pump, only needs 220v socket. Weight 45 Kg.

Sixty liter bin capacity, 7 m hose, product and air, yields approximately 700-800 m2/day, two operators on roofs. Special nozzles for applying Thermal Paint, Thermal Waterproofing, and SUBERLEV sprayed cork.

29

SUBERLEVInsulation


DIAMOND DISC REPLACEMENT Ref.163

DIAMOND DISC CONCRETE SANDER/POLISHER Ref.162

1,500 w. Variable speed control.

Dust collecting protection plate with connection for vacuum.

Double diamond segment plate.

For removing paints and smoothing surfaces in bad condition.

Diamond disc replacement, especially for sander-scraper, concrete polisher.

Scraper and removal of paint. Smoothing of surfaces.

PROFESSIONAL MIXER Ref.164

Special professional mixer for paint, mortar and sprayed cork.

Hitachi brand 1,100 w. Two power positions, with reducer, smooth and progressive starter. Powerful, durable and reliable.

SUBERLEVInsulation


30

FAÇADE RESTORATION KIT

INSPECTION CAMERA KIT AND SCREWDRIVER DRILL

Ref.165

Ref.166

Perfect harmony performance, durability and ergonomics due to its low weight and spectacular professional performance, ideal for remodeling jobs on façades.

Vertical motor.

Motor vertical.

Maximum bit: 26 mm.

2.8 joules. SDS Plus. AVC +QCC.

Lightweight Combi Hammer 800 w.

(Quick-change bit carrier).

1. 26 mm bit (for making injection holes in walls).

2. Chisel for light demolition. (light construction demolitions)

3. Beater rod for paint and misc. (mixer specifically for paints, mortars and sprayed cork). Specific coupling SDS plus.

Inspection camera and screwdriver drill.

Inspection camera with 2 ah lithium battery. Plus screwdriver drill of 10.8 volts and 2 ah battery.

Inspection camera kit, with 10.8V screwdriver. Two lithium 2.0 ah batteries. And battery charger.

31

SUBERLEVInsulation


EXHAUST FAN 4900 m3/HOUR Ref.169

Exhaust fan for industrial premises with electrical connection and heat detector for automatic launch depending on the programmed temperature.

955 RPM.225 W.4900 m3/hour.56 DB Sound Level.

SOLAR PANEL UNDER ROOF EXHAUST FAN 1500 m3/HOUR Ref.168

The Suberlev solar panel exhaust fan is the best and most economical way to ventilate attics and industrial premises.

Ecological systems, based on solar energy, are used thanks to its solar panels there is no electrical consumption or maintenance cost. It turns on when temperatures exceed 24º and turns off automatically when reaching 21º or obviously when there is no sun.

By placing the exhaust fan on the highest point of the roof, it makes air circulate properly and ventilates the attic correctly making your home a pleasant place. This robust, effective, durable and revolutionary product has been created to last year after year. It works with the solar photovoltaic panel completely autonomously without maintenance.

SUBER-TUBE SOLAR TUBE Ref.167

Suber-tube solar tube.

For natural workplace illumination.

53 cm diameter solar tube, 65 cm high. For illuminating a 40-50 square meter diameter.

The solar tube multiplies the entry of light indoors and prevents the entry and escape of heat within rooms.

SUBERLEVInsulation


32

LEV-FILTER ANTICONDENSATION INJECTION Ref.170

HUMIDITY AND TEMPERATURE SENSOR Ref.171

CO2 AIR QUALITY SENSOR Ref.172

INDOOR PURE AIR INJECTION WITH ANTI-POLLEN AND NON-ODOR FILTERS

Very versatile, economical and easy to maintain machine for solving humidity problems, including condensation, mold, and foul odors indoors due to poor ventilation. Silenced with an airtight box and covered with sound absorbing material. Regulator and speed control of 0.100 m3/h to 6 m3/h with optimized and economical consumption of 15 w to 120 w. Regulated depending on the m3 of the living space. Very quiet and long lasting motor. Autonomous operation and very easy to install with all the components and instructions for its installation, cleaning and maintenance. It comes with particulate filters and non-odor active carbon filter, inlet grill with prior filter and five air outlets for low-lying areas.

Filters may be disassembled easily and cleaned with a vacuum cleaner. Filters last between 1 and 2 years. Cleaning is recommended every 4-6 months or with each change of season.

TEMPERATURE AND RELATIVE HUMIDITY SENSOR. To optionally connect together with the LEV-FILTER interior injection.

CO2 AIR QUALITY SENSOR To optionally connect together with the LEV-FILTER interior injection.

33

SUBERLEVInsulation


MOISTURE METER Ref.174

MOISTURE METER

Equipped with a rod-type sensor for measuring moisture with contact.

Quickly indicates the moisture content of materials using PINLESS technology without damaging surfaces.

Reminder storage of up to 20 labeled readings.

BLUETOOTH transmitter with METERLINK sends moisture data wirelessly to the FLIR infrared thermal camera.

Complete set with moisture sensor, 9v battery.

Second edition with 400 stable exterior and interior colors.

Long-lasting inorganic dyes.

SPRAYED CORK AND THERMAL PAINT COLOR CHART Ref.175

3 CV SUBERLEV COMPRESSORRef.173

Professional air compressor with two-cylinder flat engine, pistons and long-lasting ceramic sleeve.

Power: 2.2 kw (3 cv).

Tank installed in the chassis. 3 liters.

Air intake 330 liters.

Continual air output: 200 liters.

Continual 24-hour work cycle.

3,000 hours without maintenance. Very portable. No oil.

* Continuously operational up to 10 bars.

SUBERLEVInsulation


34

THERMAL CAMERAS

Ref.E40 - 182E50 - 183E60 - 184

Ref.T420 - 185

Ref.C2- 177

-Thermal cameras for construction inspections.

-Localization and verification of insulation.

-Energy losses, water seepage, leaks, etc.

Measurement and Thermographic Report performed by a professional includes insulation recommendations.

FLIR Serie E

FLIR Serie Ebx

FLIR T420

FLIR C2

Ref.176

MEASUREMENT AND THERMOGRAPHIC REPORT

Ref.E 4 - 178E 5 - 179E 6 - 180E 8 - 181

SUBERLEVInsulation


SUBERLEV

THERMAL INSULATION ACOUSTICAL INSULATION

WATERPROOFING ANTI HUMIDITY

DECORATIVE BREATHABLE

ANTI CONDENSATION FLEXIBLE

ENERGY EFFICIENCY THE MOST ECONOMICAL ENERGY IS THE ONE NOT CONSUMED

WE CREATE NEW STANDARDS FOR A BETTER ENVIRONMENTFREE SHIPPING WITH ORDERS EXCEEDING 350 € (except Balearic and Canary Islands).

Check conditions for smaller orders.

WE ALSO HAVE:- Thermal camera rentals

- Machinery rentals - Thermographic reports

- Architect reports - Specific courses (anti-radiation, thermography and applications)

This catalogue is merely informational and has been prepared based on our experience. Due to the variety of surface

characteristics, application possibilities and other influential factors, for which we cannot accept any responsibility, this

publication will lose its validity with a subsequent publication.

Not subject to hazardous product identification standards.

AISLAMIENTOS SUBERLEV S.L. Offices and training center: P. I. La Mina C/ Uno Nave 6 12520 Nules (Castellón) Factory: P. I. La Plana C/ D´hijar Nave 812550 Almazora (Castellón) Tel.: 00 34 96 185 72 86 E-mail: [email protected] www.suberlev.com

SUBERLEVR

Authorized distributor

high technology in insulation - · pdf filehigh technology in insulation we create new...

Documents