high speed machining (hsm)
TRANSCRIPT
![Page 1: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/1.jpg)
A Presentation on,
By
NIKHIL R
![Page 2: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/2.jpg)
CONTENTS:-
• History of High speed machining
• Comparison between conventional and high speed
machining
• Process parameters
• Machine details
• Advantages & Disadvantages
• Application areas of HSM
• Conclusion
• References
![Page 3: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/3.jpg)
• First tries were made in early twenties of the past
century.
• The first definition of HSM was proposed by Carl
Salomon in 1931.
• He has assumed that at a certain cutting speed which is
5 –10 times higher then in conventional machining, the
chip tool interface temperature will start to decrease.
HISTORY OF HSM:-
![Page 4: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/4.jpg)
Solomon’s curve
![Page 5: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/5.jpg)
DEFINITIONS
• High cutting speed machining (Vc)
• High spindle speed machining (n)
• High feed machining (f)
• High speed and feed machining
• High productive machining
Finally,“HSM is a powerful machining method that
combines high feed rates with high spindle speeds, specific tools and specific tool motion.”
![Page 6: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/6.jpg)
Effect of cutting speed on cutting
force
![Page 7: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/7.jpg)
Effect of cutting speed on specific cutting force
for aluminium 7050
![Page 8: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/8.jpg)
Transition Range of HSM for different
metals
![Page 9: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/9.jpg)
HIGH SPEED MACHINING
ACCURACY
EFFICIENCY
REDUCED MACHINING TIME
QUALITY OF WORKPIECES
DECREASED COSTS
High Speed machining leads to -
![Page 10: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/10.jpg)
Improvement of production when using HSM
![Page 11: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/11.jpg)
FEATURES EFFECTS
Reduced heat
transfer in to the
work piece
Part accuracy
Reduction of
cutting forces
Part accuracy
Surface quality
Increased cutting
speed
Stability of rotating
cutting tool & feed rate
Increased material
removal rate (MRR)
![Page 12: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/12.jpg)
![Page 13: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/13.jpg)
Comparision between Conventional Machining and High
Speed Machining
![Page 14: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/14.jpg)
Conventional HSM
The contact time between
tool and work is large
Contact time is short
Less accurate work piece More accurate work
piece
Cutting force is large Cutting force is low
Poor surface finish Good surface finish
Material removal rate is
low
Material removal rate is
high
Cutting fluid is required Cutting fluid is not
required
![Page 15: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/15.jpg)
HSM EDM
Material removal rate
high
Material removal rate is
low
Dimensional tolerance
0.02 mm
Dim tolerance
0.1- 0.2 mm
There is no need of
making cutting tool
according to the
contour to be machined
Cutting tool has to be
made according to the
contour to be machined
Comparision between EDM and HSM
![Page 16: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/16.jpg)
![Page 17: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/17.jpg)
1) True cutting speed:-
• As cutting speed is dependent on
both
spindle speed and the diameter of the
tool, HSM should be defined as “true
cutting speed“ above a certain level.
Feed is given by,
![Page 18: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/18.jpg)
2) Metal Removal Rate
The metal removal rate is given by,
Where,
ap = vertical distance from tool tip to the reference point
mm ae = step over distance mm
vf = feed speed mm/min
![Page 19: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/19.jpg)
Surface finish is depends upon cutting tool geometry,
coating of the cutting tool, wear status of the cutting
tool etc.
3) Surface Finish:-
![Page 20: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/20.jpg)
![Page 21: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/21.jpg)
Machine tools available-
• 3-axis horizontal and vertical milling machines.
• CNC 4-axis milling machine offers the option
of tilting the milling cutters to improve the cutting
conditions.
• 5-axis machine with inter changeable spindle
units allow to rough, semi finish and finish with a
single set up.
![Page 22: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/22.jpg)
Vertical High Speed Machining Mills
![Page 23: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/23.jpg)
Specifications
![Page 24: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/24.jpg)
Horizontal High Speed Machining Mills
![Page 25: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/25.jpg)
Specifications
![Page 26: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/26.jpg)
Machine tool requirements for HSM
![Page 27: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/27.jpg)
1. TiN and TiCN coated Carbide for materials with
hardness less than 42 HRC
2. TiALN coated Carbide for materials with hardness
42 HRC and above
3. For special applications like hard turning (HRC
60-65) PCBN is used
4. Cubic boron nitrite (CBN) and ceramic for cast
iron
5. Poly crystalline diamonds (PCD) and Cermets are
used for aluminum
CUTTING TOOLS
![Page 28: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/28.jpg)
![Page 29: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/29.jpg)
ADVANTAGES
• High material removal rate
• High surface finish
• Increased productivity
• Possibility of machining of very thin walls
• Reduction in lead times
• Low cutting force
• Cutting tool and work piece temperature are kept low
• Connection time between the cutting edge and work piece is
short
• It eliminates the need of coolant
• Reduction of production process
![Page 30: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/30.jpg)
• Need for expensive and special machine tools
with advanced spindle and controllers
• Excessive tool wear
• Good work and process planning necessary
• It can be difficult to find and recruit advanced
staff
DISADVANTAGES
![Page 31: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/31.jpg)
Tool holder balancing problem:-
![Page 32: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/32.jpg)
APPLICATIONS OF HSM
![Page 33: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/33.jpg)
![Page 34: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/34.jpg)
• HSM is not simply high cutting speed .It should be
regarded as a process where the operations are
performed with very specific methods and precision
equipment.
• HSM is not necessarily high spindle speed
machining. Many HSM applications are performed
with moderate spindle speeds and large sized
cutters.
• HSM is performed in finishing in hardened steel
with high speeds and high feeds often with 4-6
times conventional cutting speeds.
CONCLUSION
![Page 35: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/35.jpg)
• HSM is high productive machining in small
sized components in roughing to finishing and
in finishing to super finishing in components of
all sizes.
• Even though HSM is known for a long time, the
research are still being developed for further
improvement of quality and optimization of cost.
![Page 36: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/36.jpg)
The technical papers referred for this seminar are listed below.
[1] PASKO, R. - PRZYBYLSKI, L. & SLODKI, B, High Speed Machining
(HSM) – the effective way of modern cutting, Cracow University of
Technology.
[2] M.A. DAVIES, T. J. BURNS, T. L. SCHMITZ, High-Speed
Machining Processes: Dynamics on Multiple Scales, National Institute
of Standards and Technology, USA.
[3] J. KOPAC, Advanced tool materials for high-speed machining, 12th
international science conference paper, Faculty of Mechanical
Engineering, University of Ljubljana, Slovenia.
[4] HERBERT SCHULZ, The History of High-Speed Machining,
Darmstadt University of Technology, Germany.
REFERENCES
![Page 37: High speed machining (HSM)](https://reader031.vdocuments.us/reader031/viewer/2022012402/55a6adfa1a28ab52418b461d/html5/thumbnails/37.jpg)