high resolution mini ptz dome camera · 2016-02-08 · thank you for purchasing this high...
TRANSCRIPT
AL 1.0
HIGH RESOLUTION MINI PTZ DOME CAMERA
M
INSTRUCTION MANUEnglish Version
WITH 3X OPTICAL ZOO
i
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION: TO REDUCE THE RICK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the products ' enclosure that may be of sufficient magnitude to constitute a risk of electric shockThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT.
Thank you for purchasing this High Resolution Mini PTZ Dome Camera. Lorex is committed to providing our customers with a high quality, reliable security product.
This camera features a 1/4" Color Sony CCD with IR Night Vision and 3X optical zoom.
The motorized controls have the ability to give you a viewing angle of 355° horizontal, and 90° vertical. This dome camera can connect to any Color Observation System, DVR, or keyboard controller with a BNC / RS-485 connection supporting the PELCO-D, PELCO-P, or EYEVIEW Protocol.
ii
General Precautions
1. All warnings and instructions of this manual should be followed.
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning.
3. Do not use this unit in humid or wet places.
4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked.
5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, antenna, and cables to protect the unit from electrical surge.
FCC CLASS B NOTICE
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instruction, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio or television technician for assistance
This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage.
However, it is imperative that the user follows this manuals guideline to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury
In order to improve the feature functions and quality of this product, the specifications are subject to change without notice from time to time.
Precautions on Installation
Please ensure you have confirmed the following prior to installing the Mini Speed PTZ Camera:
• Follow all local safety regulations
• If connecting optional accessories, please make sure they are compatible and in complete working order. For a full list of optional accessories, visit www.lorexcctv.com
• Check if the installation location is strong enough to support the camera and bracket without immediate danger of falling.
Cable Standards
Coaxial Cable
Select the proper cable length for your installation distance. The maximum recommended lengths are as follows:
• RG59/U: 750ft (230 meters)
• RG61/U: 1000ft (305 meters)
• RG11/U: 1500ft (457 meters)
RS485 Cable
Please comply with RS485 wiring standards when connecting RS485 cables. Improper connections may result in transmission errors which may cause speed dome cameras to react incorrectly.
If you use thin or low anti-interference RS485 cable when connecting the camera, the maximum transmission distance may be shortened.
Standard rule for RS485 transmission distance:
When using 20AWG(Belden 8760) Shielded Twisted Pair Cable, different control Baud Rates will have different transmission distance performance:
2400 1200 meters / 3937 feet
4800 1000 meters / 3281 feet
9600 800 meters / 2625 feet
Baud Rate Maximum Transmission Distance
iii
Setting Camera Codes and Protocols
Prior to installation, setup ID address and communication protocol of your camera. Make sure the camera is powered OFF when resetting IDs or protocols after installation. When you have set the new IDs or protocols, power on the camera to implement the changes.
Camera Self-Test
Prior to mounting the camera, power on the camera to activate a self-test. To activate the camera’s self-test, power-on the camera—the camera will automatically tilt up/down scanning and then pan hoizontal scanning for approximately 20~30 seconds. The camera will stop at Preset Point 1. The Mini Speed Dome Camera is now in normal mode.
iv
Table of Contents
Camera Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Cable Pass-Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Visible Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
RS-485 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7RS-485 Serial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7RS-485 Aster Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Connectivity Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Changing the Camera Address Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12DIP Switch Address Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Appendix 1: Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Appendix 2: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1
2
Camera Features
Camera Features
• High Resolution 1/4" Color Sony CCD Camera
• IR Night Vision
• 3X Optical Zoom
• Pan/Tilt Range of 355° horizontally and 90° vertically
• Compact foot print—only 4.4" diameter
• Pelco D/P and Eyeview Protocol Compatible
Operation Features
• Up to 32 Preset Points
• Preset Point Groups (only for Eyeview Protocol): set up to four preset point groups to control moving speed (up to 8 phases) and retention time (for each preset point—from 1~99 seconds)
• Preset Point Group Scanning (only for Eyeview Protocol): up to 16 preset points per group
• Horizontal revolution of two preset points (only for Eyeview Protocol): if setting up the camera in a small zone
• Home Position Auto Return: the camera can be set to return to the Home Position (preset point 1) every 5 minutes
• Preset Tours
• Auto Pan Scan
Note: Check manual of your DVR or keyboard controller to find information on setting these functions.
3
Getting Started
Getting Started
The system comes with the following components:
1 X INDOOR MINI MULTI-SPEED PTZ DOME CAMERA
1 X 60” BNC / POWER / RS-485 EXTENSION CABLE*
1 X MOUNTING BRACKET
1 X INSTRUCTION MANUAL
1 X BNC/POWER/RS-485CABLE
3 X MOUNTING SCREWS*May not be exactly as shown.
1 X DC POWER ADAPTOR*
Optional accessoriesIncluded only with certain models.
CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
4
Installing the Camera
Installing the Camera
There are two methods of installing the Mini Speed Dome Camera*: cable pass-through, or visible cable.
Prior to installing the camera, make sure of the following:
• You have powered-on the camera to run the automatic Self-Test (see Camera Self-Testpage iv)
• You have connected the camera to a TV, DVR, keyboard controller, or observation system(not included) to check the video signal and RS-485 connection to ensure the camera, TV, DVR, keyboard controller, or observation system are functioning properly
Cable Pass-ThroughThe cable pass-through method involves drilling a hole in the mounting surface large enough for the BNC/RS-485/Power cable to pass-through. This method conceals the cable from view and prevents tampering.
To install the camera:
1. Drill an opening in your mounting surface large enough for the cables to pass through—approximetaly 2 cm/0.79 in in diameter.
2. With the pass-through hole drilled in the mounting surface, feed the BNC/RS485/Power cable through the hole.
3. Feed the BNC/RS485/Power cable through the large hole of the included mounting plate.
4. Fasten the mounting plate to to the surface using the included mounting screws.
5. Connect the serial port of the BNC/RS485/Power cable firmly to the port on the base of the camera.
6. Place the camera on the mounting plate, making sure to line up the arrow on the base of the camera with the arrow on the plate. The camera should be flush against the mounting plate.
7. Turn the base of the camera clockwise until it clicks into place.
Figure 1.0 Mounting the camera—cable pass-through
Figure 1.1 Line-up arrows on camera and plate
*Camera may not be exactly as shown.
5
Installing the Camera
Visible CableThe visible cable method leaves the cable extending from the camera to the DVR, monitor, or observation system. This method is suggested if drilling a pass-through hole is not a viable option for installation.
To install the camera:
1. Fasten the mounting plate to the surface using the included mounting screws.
2. Secure the serial port of the BNC/RS485/Power cable firmly to the port on the base of the camera.
3. Tuck the cable into either of the slots in the base of the camera as best suits your wiring or mounting environment.
4. Place the camera on the mounting plate, making sure to line up the arrow on the base of the camera with the arrow on the plate. The camera should be flush against the mounting plate.
5. Turn the base of the camera clockwise until it clicks into place.
Figure 2.0 Connect the the cable to the camera Figure 2.1 Tuck the cable into slot (A)
Figure 2.2 Tuck the cable into slot (B)
Figure 2.3 Mount the camera
6
Installing the Camera
For both installation methods, double-check that the Mini Speed Dome Camera is firmly in place to prevent any risk of it falling down.
Electrical TestOnce the camera is mounted, connect the cables. If the camera is connected correctly and receiving sufficient power, it will automatically execute the Self-Test: the camera will tilt up/down, pan horizontally, and stop at Preset Point 1. The camera is now ready for normal operation.
RS-485 Wiring
There are two methods for wiring an RS-485 connection: Serial and Aster. Use either of these recommended wiring methods to prevent malfunction of RS-485 control.
RS-485 Serial ConnectionThis method connects speed dome cameras in a sequential manner where the first camera connects to the second, the second to the third, and so on. A terminal resistance is connected to the last camera to form a closed loop.
Figure 3.0 Serial connection method
When using a serial connection, you can connect a maximum of 32 PTZ dome cameras; if you need to connect more than 32 cameras, you should use the aster connection method.
7
Installing the Camera
RS-485 Aster ConnectionThis is the most common method in practical installation of PTZ cameras. In an Aster Connection, you need to use a RS-485 distributor to reduce interferance and stabilize the connections.
Figure 3.1 Aster connection method
Note: Without a RS-485 distributor, you risk causing a malfunction of the control signal or basic camera opeations
8
Connecting the Camera
Connecting the Camera
The Mini Speed Dome Camera works on a BNC channel of most DVRs and observation systems. Please refer to your observation system’s instruction manual for details on available channels for PTZ functionality.
To connect the camera:
1. With the camera securely mounted, connect the three terminating ends of the BNC/RS-485/Power cable to the 65 ft. BNC/RS-485/Power Extension Cable.
2. Connect the three terminating ends of the 65 ft. BNC/RS-485/Power Extension Cable to the following:
• BNC: Connect to a BNC port on the DVR or observation system
• RS485: Connect the terminating wires to the RS-485 port on the DVR, keyboard controller, or observation system (white=positive +, black=negative —)
Note: DVR, keyboard controller, or observation system must support a Pelco-D/P protocol.
• Power: Connect to the included DC power adaptor.
3. Turn on the DVR or observation system.
• Connect to Power Adaptor
• Connect to BNC input
• Connect to RS-485 ports
Figure 4.0 Terminating ends of BNC/RS-485/Power cable
Figure 4.1 Connecting BNC/RS-485/Power cable to an observation system with BNC adaptor
Connect to Power Adaptor
Connecting to a DVR / Observation System
9
Connecting the Camera
Connect to BNC input
Note: BNC adaptors and/or RCA cable may be needed for some systems.
• BNC-to-RCA adaptor
• RCA cable
• BNC-to-RCA adaptor
Connect to RS-485
Connections:
White: + (positive)
Black — (negative)
Note: Additional settings are required on the DVR, observation system, or keyboard controller to control a PTZ camera. Please refer to your observation system’s instruction manual for more information.
Figure 4.2 Rs-485 and BNC connections
Connecting to a DVR / Observation System (cont’d.)
Connectivity Diagram
Figure 4.3 Full connectivity diagram
10
Changing the Camera Address Settings
Changing the Camera Address Settings
The DIP switches inside the camera (1~10) can be changed to set a unique address for the camera (between 1~255). By default, the camera is set to channel 1.
• If using a single camera, the address does not need to be changed. Refer to the Hardware Manual for the Observation System for camera channel placement and configuration.
• If using multiple cameras, each camera must be set to a unique address using the internal DIP switches. See Figure 5.0
Note: Make sure the camera is powered off before changing the DIP switches.
To access the DIP switches:
1. Open the soft plastic cover on the back of the camera. A 10-pin DIP switch, SW9/10 is visible.
Figure 5.0 DIP switches
2. Set the DIP switches (ON is down; OFF is up) using a paperclip or other pointed tool. Set the communication protocol as below:
Protocol DIP 9 DIP 10
ON ON
OFF ON
ON OFF
OFF OFF
3. Use the DIP Switch Address Chart to set DIP switches 1~8 to the desired address.
EYEVIEW
PELCO P-9600
PELCO P-4800
PELCO D-2400
11
Changing the Camera Address Settings
DIP Switch Address Chart
Address SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF
10 OFF ON OFF ON OFF OFF OFF OFF
11 ON ON OFF ON OFF OFF OFF OFF
12 OFF OFF ON ON OFF OFF OFF OFF
13 ON OFF ON ON OFF OFF OFF OFF
14 OFF ON ON ON OFF OFF OFF OFF
15 ON ON ON ON OFF OFF OFF OFF
16 OFF OFF OFF OFF ON OFF OFF OFF
17 ON OFF OFF OFF ON OFF OFF OFF
18 OFF ON OFF OFF ON OFF OFF OFF
19 ON ON OFF OFF ON OFF OFF OFF
20 OFF OFF ON OFF ON OFF OFF OFF
21 ON OFF ON OFF ON OFF OFF OFF
22 OFF ON ON OFF ON OFF OFF OFF
23 ON ON ON OFF ON OFF OFF OFF
24 OFF OFF OFF ON ON OFF OFF OFF
25 ON OFF OFF ON ON OFF OFF OFF
26 OFF ON OFF ON ON OFF OFF OFF
27 ON ON OFF ON ON OFF OFF OFF
28 OFF OFF ON ON ON OFF OFF OFF
29 ON OFF ON ON ON OFF OFF OFF
30 OFF ON ON ON ON OFF OFF OFF
12
Changing the Camera Address Settings
DIP Switch Address Chart (cont.’d)Address SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
31 ON ON ON ON ON OFF OFF OFF
32 OFF OFF OFF OFF OFF ON OFF OFF
33 ON OFF OFF OFF OFF ON OFF OFF
34 OFF ON OFF OFF OFF ON OFF OFF
35 ON ON OFF OFF OFF ON OFF OFF
36 OFF OFF ON OFF OFF ON OFF OFF
37 ON OFF ON OFF OFF ON OFF OFF
38 OFF ON ON OFF OFF ON OFF OFF
39 ON ON ON OFF OFF ON OFF OFF
40 OFF OFF OFF ON OFF ON OFF OFF
41 ON OFF OFF ON OFF ON OFF OFF
42 OFF ON OFF ON OFF ON OFF OFF
43 ON ON OFF ON OFF ON OFF OFF
44 OFF OFF ON ON OFF ON OFF OFF
45 ON OFF ON ON OFF ON OFF OFF
46 OFF ON ON ON OFF ON OFF OFF
47 ON ON ON ON OFF ON OFF OFF
48 OFF OFF OFF OFF ON ON OFF OFF
49 ON OFF OFF OFF ON ON OFF OFF
50 OFF ON OFF OFF ON ON OFF OFF
51 ON ON OFF OFF ON ON OFF OFF
52 OFF OFF ON OFF ON ON OFF OFF
53 ON OFF ON OFF ON ON OFF OFF
54 OFF ON ON OFF ON ON OFF OFF
55 ON ON ON OFF ON ON OFF OFF
56 OFF OFF OFF ON ON ON OFF OFF
57 ON OFF OFF ON ON ON OFF OFF
58 OFF ON OFF ON ON ON OFF OFF
59 ON ON OFF ON ON ON OFF OFF
60 OFF OFF ON ON ON ON OFF OFF
13
Changing the Camera Address Settings
DIP Switch Address Chart (cont.’d)Address SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
61 ON OFF ON ON ON OFF OFF OFF
62 OFF ON ON ON ON ON OFF OFF
63 ON ON ON ON ON ON OFF OFF
64 OFF OFF OFF OFF OFF OFF ON OFF
65 ON OFF OFF OFF OFF OFF ON OFF
66 OFF ON OFF OFF OFF OFF ON OFF
67 ON ON OFF OFF OFF OFF ON OFF
68 OFF OFF ON OFF OFF OFF ON OFF
69 ON OFF ON OFF OFF OFF ON OFF
70 OFF ON ON OFF OFF OFF ON OFF
71 ON ON ON OFF OFF OFF ON OFF
72 OFF OFF OFF ON OFF OFF ON OFF
73 ON OFF OFF ON OFF OFF ON OFF
74 OFF ON OFF ON OFF OFF ON OFF
75 ON ON OFF ON OFF OFF ON OFF
76 OFF OFF ON ON OFF OFF ON OFF
77 ON OFF ON ON OFF OFF ON OFF
78 OFF ON ON ON OFF OFF ON OFF
79 ON ON ON ON OFF OFF OFF OFF
80 OFF OFF OFF OFF ON OFF ON OFF
81 ON OFF OFF OFF ON OFF ON OFF
82 OFF ON OFF OFF ON OFF ON OFF
83 ON ON OFF OFF ON OFF ON OFF
84 OFF OFF ON OFF ON OFF ON OFF
85 ON OFF ON OFF ON OFF ON OFF
86 OFF ON ON OFF ON OFF ON OFF
87 ON ON ON OFF ON OFF ON OFF
88 OFF OFF OFF ON ON OFF ON OFF
89 ON OFF OFF ON ON OFF ON OFF
90 OFF ON OFF ON ON OFF ON OFF
14
Changing the Camera Address Settings
DIP Switch Address Chart (cont.’d)Address SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
91 ON ON OFF ON ON OFF ON OFF
92 OFF OFF ON ON ON OFF ON OFF
93 ON OFF ON ON ON OFF ON OFF
94 OFF ON ON ON ON OFF ON OFF
95 ON ON ON ON ON OFF ON OFF
96 OFF OFF OFF OFF OFF ON ON OFF
97 ON OFF OFF OFF OFF ON ON OFF
98 OFF ON OFF OFF OFF ON ON OFF
99 ON ON OFF OFF OFF ON ON OFF
100 OFF OFF ON OFF OFF ON ON OFF
101 ON OFF ON OFF OFF ON ON OFF
102 OFF ON ON OFF OFF ON ON OFF
103 ON ON ON OFF OFF ON ON OFF
104 OFF OFF OFF ON OFF ON ON OFF
105 ON OFF OFF ON OFF ON ON OFF
106 OFF ON OFF ON OFF ON ON OFF
107 ON ON OFF ON OFF ON ON OFF
108 OFF OFF ON ON OFF ON ON OFF
109 ON OFF ON ON OFF ON ON OFF
110 OFF ON ON ON OFF ON ON OFF
111 ON ON ON ON OFF ON ON OFF
112 OFF OFF OFF OFF ON ON ON OFF
113 ON OFF OFF OFF ON ON ON OFF
114 OFF ON OFF OFF ON ON ON OFF
115 ON ON OFF OFF ON ON ON OFF
116 OFF OFF ON OFF ON ON ON OFF
117 ON OFF ON OFF ON ON ON OFF
118 OFF ON ON OFF ON ON ON OFF
119 ON ON ON OFF ON ON ON OFF
120 OFF OFF OFF ON ON ON ON OFF
15
Changing the Camera Address Settings
DIP Switch Address Chart (cont.’d)Address SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
121 ON OFF OFF ON ON ON ON OFF
122 OFF ON OFF ON ON ON ON OFF
123 ON ON OFF ON ON ON ON OFF
124 OFF OFF ON ON ON ON ON OFF
125 ON OFF ON ON ON ON ON OFF
126 OFF ON ON ON ON ON ON OFF
127 ON ON ON ON ON ON ON OFF
128 OFF OFF OFF OFF OFF OFF OFF ON
129 ON OFF OFF OFF OFF OFF OFF ON
130 OFF ON OFF OFF OFF OFF OFF ON
131 ON ON OFF OFF OFF OFF OFF ON
132 OFF OFF ON OFF OFF OFF OFF ON
133 ON OFF ON OFF OFF OFF OFF ON
134 OFF ON ON OFF OFF OFF OFF ON
135 ON ON ON OFF OFF OFF OFF ON
136 OFF OFF OFF ON OFF OFF OFF ON
137 ON OFF OFF ON OFF OFF OFF ON
138 OFF ON OFF ON OFF OFF OFF ON
139 ON ON OFF ON OFF OFF OFF ON
140 OFF OFF ON ON OFF OFF OFF ON
141 ON OFF ON ON OFF OFF OFF ON
142 OFF ON ON ON OFF OFF OFF ON
143 ON ON ON ON OFF OFF OFF ON
144 OFF OFF OFF OFF ON OFF OFF ON
145 ON OFF OFF OFF ON OFF OFF ON
146 OFF ON OFF OFF ON OFF OFF ON
147 ON ON OFF OFF ON OFF OFF ON
148 OFF OFF ON OFF ON OFF OFF ON
149 ON OFF ON OFF ON OFF OFF ON
150 OFF ON ON OFF ON OFF OFF ON
16
Changing the Camera Address Settings
DIP Switch Address Chart (cont.’d)Address SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
151 ON ON ON OFF ON OFF OFF ON
152 OFF OFF OFF ON ON OFF OFF ON
153 ON OFF OFF ON ON OFF OFF ON
154 OFF ON OFF ON ON OFF OFF ON
155 ON ON OFF ON ON OFF OFF ON
156 OFF OFF ON ON ON OFF OFF ON
157 ON OFF ON ON ON OFF OFF ON
158 OFF ON ON ON ON OFF OFF ON
159 ON ON ON ON ON OFF OFF ON
160 OFF OFF OFF OFF OFF ON OFF ON
161 ON OFF OFF OFF OFF ON OFF ON
162 OFF ON OFF OFF OFF ON OFF ON
163 ON ON OFF OFF OFF ON OFF ON
164 OFF OFF ON OFF OFF ON OFF ON
165 ON OFF ON OFF OFF ON OFF ON
166 OFF ON ON OFF OFF ON OFF ON
167 ON ON ON OFF OFF ON OFF ON
168 OFF OFF OFF ON OFF ON OFF ON
169 ON OFF OFF ON OFF ON OFF ON
170 OFF ON OFF ON OFF ON OFF ON
171 ON ON OFF ON OFF ON OFF ON
172 OFF OFF ON ON OFF ON OFF ON
173 ON OFF ON ON OFF ON OFF ON
174 OFF ON ON ON OFF ON OFF ON
175 ON ON ON ON OFF ON OFF ON
176 OFF OFF OFF OFF ON ON OFF ON
177 ON OFF OFF OFF ON ON OFF ON
178 OFF ON OFF OFF ON ON OFF ON
179 ON ON OFF OFF ON ON OFF ON
180 OFF OFF ON OFF ON ON OFF ON
17
Changing the Camera Address Settings
DIP Switch Address Chart (cont.’d)Address SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
181 ON OFF ON OFF ON ON OFF ON
182 OFF ON ON OFF ON ON OFF ON
183 ON ON ON OFF ON ON OFF ON
184 OFF OFF OFF ON ON ON OFF ON
185 ON OFF OFF ON ON ON OFF ON
186 OFF ON OFF ON ON ON OFF ON
187 ON ON OFF ON ON ON OFF ON
188 OFF OFF ON ON ON ON OFF ON
189 ON OFF ON ON ON ON OFF ON
190 OFF ON ON ON ON ON OFF ON
191 ON ON ON ON ON ON OFF ON
192 OFF OFF OFF OFF OFF OFF ON ON
193 ON OFF OFF OFF OFF OFF ON ON
194 OFF ON OFF OFF OFF OFF ON ON
195 ON ON OFF OFF OFF OFF ON ON
196 OFF OFF ON OFF OFF OFF ON ON
197 ON OFF ON OFF OFF OFF ON ON
198 OFF ON ON OFF OFF OFF ON ON
199 ON ON ON OFF OFF OFF ON ON
200 OFF OFF OFF ON OFF OFF ON ON
201 ON OFF OFF ON OFF OFF ON ON
202 OFF ON OFF ON OFF OFF ON ON
203 ON ON OFF ON OFF OFF ON ON
204 OFF OFF ON ON OFF OFF ON ON
205 ON OFF ON ON OFF OFF ON ON
206 OFF ON ON ON OFF OFF ON ON
207 ON ON ON ON OFF OFF ON ON
208 OFF OFF OFF OFF ON OFF ON ON
209 ON OFF OFF OFF ON OFF ON ON
210 OFF ON OFF OFF ON OFF ON ON
18
Changing the Camera Address Settings
DIP Switch Address Chart (cont.’d)Address SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
211 ON ON OFF OFF ON OFF ON ON
212 OFF OFF ON OFF ON OFF ON ON
213 ON OFF ON OFF ON OFF ON ON
214 OFF ON ON OFF ON OFF ON ON
215 ON ON ON OFF ON OFF ON ON
216 OFF OFF OFF ON ON OFF ON ON
217 ON OFF OFF ON ON OFF ON ON
218 OFF ON OFF ON ON OFF ON ON
219 ON ON OFF ON ON OFF ON ON
220 OFF OFF ON ON ON OFF ON ON
221 ON OFF ON ON ON OFF ON ON
222 OFF ON ON ON ON OFF ON ON
223 ON ON ON ON ON OFF ON ON
224 OFF OFF OFF OFF OFF ON ON ON
225 ON OFF OFF OFF OFF ON ON ON
226 OFF ON OFF OFF OFF ON ON ON
227 ON ON OFF OFF OFF ON ON ON
228 OFF OFF ON OFF OFF ON ON ON
229 ON OFF ON OFF OFF ON ON ON
230 OFF ON ON OFF OFF ON ON ON
231 ON ON ON OFF OFF ON ON ON
232 OFF OFF OFF ON OFF ON ON ON
233 ON OFF OFF ON OFF ON ON ON
234 OFF ON OFF ON OFF ON ON ON
235 ON ON OFF ON OFF ON ON ON
236 OFF OFF ON ON OFF ON ON ON
237 ON OFF ON ON OFF ON ON ON
238 OFF ON ON ON OFF ON ON ON
239 ON ON ON ON OFF ON ON ON
240 OFF OFF OFF OFF ON ON ON ON
19
Changing the Camera Address Settings
DIP Switch Address Chart (cont.’d)Address SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
241 ON OFF OFF OFF ON ON ON ON
242 OFF ON OFF OFF ON ON ON ON
243 ON ON OFF OFF ON ON ON ON
244 OFF OFF ON OFF ON ON ON ON
245 ON OFF ON OFF ON ON ON ON
246 OFF ON ON OFF ON ON ON ON
247 ON ON ON OFF ON ON ON ON
248 OFF OFF OFF ON ON ON ON ON
249 ON OFF OFF ON ON ON ON ON
250 OFF ON OFF ON ON ON ON ON
251 ON ON OFF ON ON ON ON ON
252 OFF OFF ON ON ON ON ON ON
253 ON OFF ON ON ON ON ON ON
254 OFF ON ON ON ON ON ON ON
255 ON ON ON ON ON ON ON ON
20
Appendix 1: Technical Specifications
Appendix 1: Technical Specifications
Dimensions
Resolution 480 TV lines
Lens Zoom Type: 2.8~7.3 mm
Effective Pixels 786K(H) x 494K(V)
Video Output 1.0V p.p (75 ohms)
Scanning System 525 lines; 2:1 interlace
PTZ Protocol Pelco-D, Pelco-P
Supported Baud Rate 2400 (Pelco-D); 4800/9600 (Pelco-P)
Power Requirement 12 DC, 1.0 Amp
Operating Temperature 14 °F~122°F (-10°C to 50°C)
Dimensions 110mm (W) x 110mm (H) x 110mm (D)/
4.4" (W) x 4.4" (H) x 4.4" (D)
Weight 363 g / 0.8 lbs
Housings ABS Plastic
Connections BNC, RS-485
21
Appendix 2: Troubleshooting
Appendix 2: Troubleshooting
Error Possible Causes Solutions
Camera runs Self-Test when first powered on, but cannot be controlled
• Keyboard or DVR communication protocol is not the same as that of the camera
• Make sure protocols on keyboard or DVR match those of the camera
• Keyboard or DVR communication baud rate is not the same as that of the camera
• Make sure baud rates on keyboard or DVR match those of the camera
• RS485 polarity error (positive and negative wires are switched)
• Switch polarity of RS485 wires
• RS485 faulty wiring connection • Check RS485 wiring
Camera control is working, but not smoothly
• Mainframe is too far from camera
• Check wires for error and/or set terminal resistance at the last camera
• RS485 has a disconnected wire • Reconnect RS485 wire
• Too many cameras are paralleled in a series
• Install an RS485 distributor
Camera is powered on, but there is no video output
• Power adaptor may be not firmly connected to outlet
• Check the connection between the power adaptor and the outlet
• The voltage from the outlet is too low
• Check that the voltage to the camera is 12V DC; if not, use an adaptor that is no more than 12V ±10%, otherwise it will overload the camera
22