high quality valves - dracdt.com · high quality valves water treatment district energy tank...
TRANSCRIPT
high qualityvalves
WATER TREATMENTDISTRICT ENERGYTANK STORAGECONSTRUCTION & BUILDINGSPROCESS INDUSTRY
belvenPRODUCT RANGEFIELD APPLICATIONS
REFERENCES
VOPAK TERMINALS - LEFT BANK BEVEREN
VOPAK TERMINALS - EUROTANK - RIGHT BANK - ANTWERP
EUROTANK - MAASVLAKTE ROTTERDAM
ADPO NV - KALLO
OILTANKING STOLTHAVEN - ANTWERP
STOLTHAVEN
ORGANIK KIMYA - ROTTERDAM
VOPAK- BOTLEK - ROTTERDAM
SEA-TANK TERMINAL - GHENT
SEA-TANK TERMINAL - ROUEN
SEA-TANK TERMINAL - BORDEAUX
VITOL EUROPOORT - ROTTERDAM
SHELL COMPANY
ADPO GHENT NV - GHENT
NOORDNATIE TERMINALS - ANTWERP
LBC TANK TERMINAL - ANTWERP
LBC-ERTISA( BAYERSITE) - ANTWERP
EOC SURFACTANTS - OUDENAARDE
LANXESS - ANTWERP
AVIA BELGOMAZOUT - LIEGE
ALCA PETROLEUM - ANTWERP
ORGANIK KIMYA - DELTA VANA - ISTANBUL
KUWAIT PETROLEUM - ANTWERP
ARTECO - ELF/TOTAL-LUBRICANTS - SCHOTEN
TOTAL - GRIMBERGEN
BRC-PETROPLUS - ANTWERP
OILTANKING - TERNEUZEN
ITC-RUBIS - ANTWERP
STOLT - SINGAPORE
VITOL - ANTWERP - (PETROPLUS / UNIVERSAL REFINING)
ARGOS - ROTTERDAM
TANK STORAGE
references
(PETRO-) CHEMICAL INDUSTRY
TRUCK & (SEMI) TRAILERS INDUSTRY
METALURGICAL INDUSTRY
other markets
2-piece ball valve full bore end connections according BSP or NPT face to face dimension according our
production standard available in various body and
seat material
SIZE: 8mm - 50mm / 1/4” - 2”
BV 1 1-piece body ball valve, side entryreduced bore end connections according BSP or NPTface to face dimension according our
production standard available in various body and
seat material
BV 2
SIZE: 8mm - 100mm / 1/4” - 4”
BV 3 three-piece ball valve full boreend connections according BSP, NPT,
BW or SWface to face according our production
standard / M3 available in various body and
seat material
SIZE: 8mm - 150mm / 1/4” - 6”
BV 6
BV 4two-piece, split body ball valve true integral full boreflange connections according DIN 2501 / DIN 2526 -
PN 10/16/40 / ANSI B16.5face to face dimension according DIN 3202-F18
(F4/F5) & F1, EN 558-1-14/15 & 1 / ANSI B16.10 - A-150/A-300available in various body, ball and stem materialdifferent seat material PTFE, RTFE, CTFE, MPTFE,
PEEK, ...trunion execution available on request
SIZE: DN 15 - DN 300 / 1/2” - 12”
3-way ball valve, L or T-borereduced boreend connections according BSP or NPT face to face dimension according our produc-
tion standardavailable in various body and
seat material
BV 7 one-piece body ball valve, side entryreduced or full boreflange connections according DIN 2501 / DIN
2526 - PN 10/16, ANSI B 16.5 face to face dimension according DIN 3202-F18
(F4/F5), EN 558-1-14/15, ANSI B 16.10 - A-150available in various body and seat material
SIZE: DN 15 - DN 200 / 1/2” - 8”
BV 8wafer one-piece body ball valve, side entryreduced or full boreflange connections according DIN 2501 / DIN
2526 - PN 10/16, ANSI B 16.5 face to face dimension according our produc-
tion standardavailable in various body and seat material
SIZE: DN 15 - DN 200 / 1/2” - 8”
SIZE: 8mm - 50mm / 1/4” - 2”
ADR FIRE SAFE SIL MTBFANSI ISO KVBG / ARGB A/105TA-LUFT 3.1 EN GOSTPED ATEX BS ROSTECHNADZOR
ball valves
REFERENCES
NCCI
AL FAISALIAH CENTRE
COURT COMPLEX - RIYADH
SABIC - RIYADH
GRANADA CENTER - RIYADH
AL ANOUD - RIYADH
MINISTERY OF FINANCE
SHEIKH ZAYED ROAD-2 - DUBAI
KHALIFA 2 - ALDAR 10 - ABU-DHABI
MOHAMED BIN ZAYED CITY - AD-12 - ABU-DHABI
SPINNEYS - ABU-DHABI
AJMAN 2 - AJ-02
ALDAR 10 - AD-07 - ABU-DHABI
CENTRAL MARKET - AD-08 - ABU-DHABI
DIP 3 & DIP 6 - ABU-DHABI
SHEIK ZAYED ROAD - DB-05
RAS AL KHAIMIH EXP. - RK-01
EMIRATES UNIVERSITY
ZAYED MILITARY CITY - T-08
DUBAI METRO - DM-03
DUBAI METRO - DM-05
AL RAHA BEACH - RB-02
AL RAHA BEACH - RB-04
AL KHEELY MALL
ZAYED MILITARY CITY - T-07
AL RIGGA - DM-02
AL BARSHA
RASHIDYIA
JEBEL ALI JUMEIRA - DM-06
AL KIFAF - DM-04
JABEL ALI INDUSTRIAL ZONE - DM-01
AIRPORT ROAD
YAS-ISLAND - YI-01 / YI-02
MUSAHHAH RESIDENTIAL CITY
DUBAI METRO DB-05-SZR2
AL KIFAF - DM04-T-C-01-07
CENTRAL MARKET
SHAMS ISLAND
PRINCES NOUR UNIVERSITY - KSA
GIRLS COLLEGE - KSA
SUEZ STEEL COMPANY - CAIRO - EGYPT
OLAYA TOWERS - RIYADH - KSA
ZUHAIR FAYEZ - RIYADH - KSA
FIRE PROTECTION SYSTEMS
SHIP BUILDING SYSTEMS
FOOD INDUSTRY
DISTRICT ENERGYother markets
references
SIZE: DN 32 - DN 1200 / 5/4” - 48”
BV 10 wafer type butterfly valve designed according EN 593flange connections according EN 1092-2 - PN
6/10/16, ASME/ANSI B16.5 class 150, ASME /ANSI B16.47 class 150 serie A face to face dimension according EN 558-1 series
20, ISO 5752 series 20, DIN 3202 K1, API 609 cat. A, BS 5155 table 6, MSS SP-67 table 3backup seat or soft seat executionavailable in various body, disc and
seat material
SIZE: DN 50 - DN 1200 / 14” - 48”
BV 11 U-section wafer type butterfly valve designed
according EN 593flange connections according EN 1092-2 - PN
10/16, ASME/ANSI B16.5 class 150, ASME /ANSI B16.47 class 150 serie A face to face dimension according EN 558-1 se-
ries 20, ISO 5752 series 20, DIN 3202 K1, API 609 cat. A, BS 5155 table 6, MSS SP-67 table 3backup seat executionavailable in various body, disc and
seat material
SIZE: DN 40 - DN 1200 / 1 1/2” - 48”
BV 12 lug type butterfly valve designed according EN 593flange connections according EN 1092-2 -
PN 6/10/16, ASME/ANSI B16.5 class 150, ASME /ANSI B16.47 class 150 serie A face to face dimension according EN 558-1 series
20, ISO 5752 series 20, DIN 3202 K1, API 609 cat. A, BS 5155 table 6, MSS SP-67 table 3backup seat or soft seat executionavailable in various body, disc and
seat material
SIZE: DN 200 - DN 2800 / 8” - 112”
BV 13 double flanged eccentric butterfly valve
designed according EN 593flange connections according EN 1092-2 -
PN 10/16 face to face dimension according EN 558-1
series 13 and 14, ISO 5752 series 13 and 14, DIN 3202 F4 and F16, BS 5155 table 6resilient disc seal executionavailable in various body, disc and
seat material
SIZE: DN 50 - DN 2000 / 2” - 80”
BV 14 double flanged concentric butterfly valve
designed according EN 593flange connections according EN 1092-2 - PN
10/16, ASME/ANSI B16.5 class 150, ASME /ANSI B16.47 class 150 serie A face to face dimension according EN 558-1 series
13, ISO 5752 series 13, DIN 3202 F16, API 609 cat. B, BS 5155 table 6vulcanised seat on the bodyavailable in various body, disc and
seat material
SIZE: DN 25 - DN 600 / 1” - 24”
BV 10-TFM wafer type, two-piece, TFM-lined butterfly valve
designed according EN 593flange connections according EN 1092-2 -
PN 10/16 face to face dimension according EN 558-1 series
20, ISO 5752 series 20, DIN 3202 K1, API 609 cat. A, BS 5155 table 6, MSS SP-67 table 3TFM backup seat for high performance demandsavailable in various body, stem, disc and
seat material
SIZE: DN 40 - DN 600 / 1 1/2” - 24”
BV 12-TFM lug type, two-piece, TFM-lined butterfly valve
designed according EN 593flange connections according EN 1092-2 -
PN 10/16 face to face dimension according EN 558-1
series 20, ISO 5752 series 20, DIN 3202 K1, API 609 cat. A, BS 5155 table 6, MSS SP-67 table 3TFM backup seat for high performance
demandsavailable in various body, stem, disc and
seat material
ADR ISO ROSTECHNADZORANSI 3.1 DVGWTA-LUFT WRAS KTWPED GOST
butterfly valves
REFERENCES
SEWAGE TREATMENT PLANT STEKENE
SEWAGE TREATMENT PLANT LEDEGEM
PUMPING STATION HAVANNASTRAAT MERKSEM
WATER TREATMENT PLANT ROMANIA
VALMAS VLETEREN
BIOWANZE
MALTEUROP FRANCE VITRY
WATER TREATMENT PLANT SCLESSIN
PUMPING STATIONLONDENSTRAAT GHENT
PUMPING STATION BREESTRAETEN MERCHTEM
PUMPING STATION BRUGGESTRAAT MECHELEN
PUMPING STATION HANSWIJK DE BRECHT MECHELEN
PUMPING STATION RIJMENAMSE STEENWEG MECHELEN
PUMPING STATION D.AESTENSTRAAT BEERSE
PUMPING STATION MEIR ANTWERP
PUMPING STATION SCHOOLSTRAAT ZEVEKOTE
PUMPING STATION BRUSSELSE STEENWEG MELLE
PUMPING STATION SCHOONAARDSEBAAN SCHOONAARDE
PUMPING STATION RICKSTEENWEG ZWEVEZELE
SEWAGE TREATMENT PLANT BRASSCHAAT
PUMPING STATION VELM-SCHERMERSHOEK-KLOOSTERBEEK
PUMPING STATION DRIESTENBROEKSTRAAT NEDERBRAKEL
PUMPING STATION BISSCHOPHOEKLAAN KOEKELARE
PUMPING STATION RUGGESTRAAT AVELGEM
PUMPING STATION NIEUWE DIJK LOMMEL
PUMPING STATION KAAISTRAAT STEKENE
PUMPING STATION+AERATION BASIN LEUVENSESTEENWEG
SMALL WATER TREATMENT STATION WESTOUTER
PUMPING STATION DILBEEK
SMALL WATER TREATMENT STATIONLO-RENIGE
COOLING WATER SYSTEM CITRIQUE TIENEN
SMALL WATER TREATMENT STATION MOORSLEDE
SMALL WATER TREATMENT STATION ESSEN
SMALL WATER TREATMENT STATION ADINKERKE
SMALL WATER TREATMENT STATION PITTEM
WATER TREATMENT PLANT ROMANIA
WATER TREATMENT PLANT OBOURG
WATER TREATMENT PLANT MARRAKECH
SEWAGE TREATMENT PLANT ADINKERKE
SEWAGE TREATMENT PLANT BRECHT
SEWAGE TREATMENT PLANT MELLE
other markets
HEATING & VENTILATION MARKET
WATER TREATMENT
CONSTRUCTION & MACHINERY
AUTOMOTIVE MARKET
references
(knife) gate valves
check valves
SIZE: DN 15 - DN 300 / 1/2” - 12”
BV 36 disco wafer check valvespring loaded execution flange connections according PN10/16/40 and A-
150/A-300face to face dimension according DIN EN 558-1easy to install and maintenance freelow opening pressure and low pressure dropautomatically held in central position by the flange
screwsavailable in various body, disc and seat material
SIZE: DN 32 - DN 600 / 1 1/2” - 24”
BV 38
SIZE: DN 32 - DN 600 / 1 1/2” - 24”
BV 39
ADR 3.1PED GOSTISO ROSTECHNADZOR
wafer swing check valveflange connections according
PN10/16/40 and A-150/A-300short face to face dimension according our production
standardeasy to install and maintenance freelow opening pressure and low pressure dropautomatically held in central position by the flange
screwsavailable in various body, disc and seat material
wafer swing check valvespring loaded executionflange connections according PN10/16/40 and
A-150/A-300short face to face dimension according our production
standardeasy to install and maintenance freelow opening pressure and low pressure dropautomatically held in central position by the flange
screwsavailable in various body, disc and seat material
SIZE: DN 50 - DN 600 / 2” - 24”
BV 40 dual-plate check valvespring loaded executionflange connections according PN10/16/40 and
A-150/A-300face to face dimension according our production
standardeasy to install and maintenance freelow opening pressure and low pressure dropautomatically held in central position by the flange
screwsavailable in various body, disc and seat material
SIZE: DN 50 - DN 400 / 2” - 16”
BV 41 ball check valveflange connections according PN10/16 and A-150face to face dimension according DIN EN 558-1 serie 48,
ANSI B16.10easy to install and maintenance freehorizontal and vertical installationavailable in various body and seat material
gate valveflange connections according PN10/16 and A-150face to face dimension according DIN 3202-F4/F5,
ANSI B16.10easy to regulate the flowavailable in various body and seat material
SIZE: DN 40 - DN 600 / 1 1/2” - 24”
BV 49 (knife) gate valveflange connections according PN10/16 and A-150face to face dimension according production
standardeasy to regulate the flowavailable in various body and seat material
SIZE: DN 50 - DN 600 / 2” - 24”
BV 50
dismantling joints strainers
dismantling jointsflange connections according PN10/16horizontal and vertical installationeasy to install and maintenance freebody and flanges available in steel A216
WCB
SIZE: DN 50 - DN 1600 / 2” - 64”
BV 51 Y-strainersflange connections according PN10/16 and A-150face to face dimension according DIN 3202 - F1,
ANSI B16.10easy cleaning of strainerpossible control of pressure drop by pressure
gaugesavailable in various body and seat material
SIZE: DN 15 - DN 600 / 1/2” - 24”
BV 56
BV 75
HIGH PERFORMANCE BUTTERFLY VALVES
FLUE GASSES VALVES
RUBBER EXPANSION JOINTS
BREATHER VALVES
FLAME ARRESTERS
PRESSURE & VACUUM RELIEF VALVES
EMERGENCY VENTS
GAUGE HATCHES
GLOBE VALVES
BELLOWS VALVES
NEEDLE VALVES
PISTON CHECK VALVES
FLANGED SWING CHECK VALVES
FOOT VALVES
THREADED AND WELDED GATE VALVES
BASKET STRAINERS
THREADED Y-STRAINERS
STRIPPER CRANE
DRAIN VALVE
SPRING SAFETY VALVE
OVERFLOW VALVE
SIGHT GLASS
FLOATING VALVES
DIFFERENTIAL PRESSURE VALVES
BALANCING VALVES
other valves
BV 74
BV 71 | BV 72
BV 70
BV 65
BV 64 | BV 66
BV 63
BV 62
BV 55
BV 53 | BV 54
BV 46 | BV 47
BV 44
BV 42
BV 35 | BV 37
BV 34
BV 30
BV 26 | BV 27 | BV 28 | BV 29 | BV 31 | BV 33
BV 25
BV 24
BV 22 | BV 23
BV 19 | BV 20
BV 21
BV 18
BV 16
BV 10-HP |BV 12-HP | BV 13-HP | BV 10-TRI| BV 12-TRI |BV 13-TRI | BV 15
MANUAL • LEVER in different materials (long – short model), adjustable, butterfly or oval lever for small sizes, T-lever
(standard for big sizes), fail safe lever, ... • GEARBOX in different materials such as cast iron or aluminium, standard/lockable/with chainwheel, with
visual open/close indication
PNEUMATIC Double acting pneumatic actuator - DA Single acting pneumatic actuator - SA • Suitable for high duty cycles • Fast opening and closing times • Few moving parts: increases operational safety • Namur design for easy mounting of accessories, as limit switches, (NAMUR)
solenoid valves and bus communication systems • Can be combined with emergency operation (manual override - MOD)
SA : Fail-safe function can easily be realized in spring closing or spring opening configuration, standard Belven chooses for operational safety – fail close position
ELECTRIC Belven aims to find solutions suitable for the automation of valves for the industrial and construction sector. The usage of electronic components of last generation, together with precise mechanic, fruit of careful research and development, enables high performance and long-term reliability of the product.
ELECTRIC HYDRAULIC • High operational safety • Modular design for easy mounting of accessories, like limit switches or visual open/close indication • Suitable for submerged purposes (IP68) as option • Different oil pressures possible
ACCESSORIES • Stem extension in steel or stainless steel • Visual indicators • Solenoid valves, steered by different voltages /currents and available in different ATEX protection classes• Limit switches (mechanical, inductive, capacitive, ...)
operating options
• Wide range of voltage options • Self-locking reduction gear • The electronic circuit adjusts automatically the motor speed depending on the mechanical charge variations
in order to drive the cycle always in the same time • All actuators are provided with torque switch • Thermal protection • Usual required options, like extra limit switches, visual open/close indication, heater and even an emergency
handwheel operator are (often) standard integrated in the actuator • Open / close and modulating duty • Different protection classes
For more information related to our standardisation on electric actuators and brands, kindly contact our sales department.
G:\Essais.grp\Distributiemateriaal\RHT testen\2002\3158fr.doc 1/3
Association Royale des Gaziers BelgesRue de Rhode 125B-1630 LINKEBEEK
tél. +32/2/383.02.00 - fax +32/2/380.87.04
BT/rapport d’essai 3065-3066-3158fr 10 decembre 2003
RAPPORT D’ESSAI
TENUE A HAUTE TEMPERATURE
Les résultats des essais ne sont valables que pour les exemplaires des pièces qui ont été soumises. L’essai ne permet pas de qualifier le produit pour son application dans l’industrie gazière. En aucun cas ce document ne peut être considéré comme une agréation du produit.
Type de pièceVanne à boisseau sphérique Belgium Ventiel type BV4 gas DN50-PN40Vanne à boisseau sphérique Belgium Ventiel type BV4 gas DN100-PN16Vanne à boisseau sphérique Belgium Ventiel type BV4 gas DN150-PN16
Date d’essai : 26-27/06/2002 pour les DN 50 et DN1004/10/2003 pour le DN 150
Fournisseur : Belgium VentielBlokhuisstraat 26Industriepark Noord2800, MECHELEN
Personne contactée : Mr Jan Van den Brande – Jozef Callebaut
Description succincte de la pièce :
Vanne à boisseau sphérique Belgium Ventiel type BV4 gas DN50 - DN100 –DN150Exécution suivant plan BV n°: 040GAS50200
Modalité de l’essai : (fait suivant EN 1755 annexe A procédure B)
La vanne est montée, en position fermée, entre deux tubes en acier et l’ensemble est fixé dans le four de façon à permettre une dilatation horizontale tout en soutenant suffisamment l’ensemble. Le tube à l’entrée est raccordé au réseau d’azote. Le tube à la sortie est ouvert.
certifications
worldwide service
Dealer locator available on website in summer 2012
ADR l WRAS l DIN-DVGW l ATEX l KVBG l TA-LUFT l FIRE SAFE l ISO l PED l GOST l ROSTECHNADZOR l HYGIENIC
belven, your partner for valves
0036
DESIGNValves can be found in many different designs. Every Belven valve offers a specific solution for a customers demand. When defining your requested valve, next to body construction, the material is also an important issue to tackle. The Belven valve range offers you different materials such as brass, bronze, cast iron, copper, ductile iron, metal alloys, steels and stainless steel. Within these different materials and body constructions, Belven has optimised its range by offering standard product codes.
RESEARCH & DEVELOPMENT Every valve has been produced with preliminary thorough research and testing. Traceability of the product is a key factor for Belven, it can furnish you with the necessary certificates on pressure and materials. Belven continuously strives for innovation through product develop-ment and expanding its experience by daily testing its own quality system. Belven is ISO 9001 certified and has all relevant product certificates.
SALES SUPPORT Belven ’s partners are located wordwide and they can offer you the necessary support in your local market. Besides these local service points, the head offices has plenty of experienced people on each market to support you in finding the correct valve you require for.
FOLLOW UP & DELIVERYAt order placement, the Belven sales and logistic team follows your order carefully to ensure your goods are handled as quickly as possible. This way, you will be notified in due course when your goods can be expected your way. The central warehouse in Belgium carries a large stock of stan-dard product types. Deliveries ex works, transport by road, cargo or air, express deliveries; all is pos-sible through Belven’s well organised logistic department. Belven supervises the transport through its contacts and will gladly organise all relevant export documentation you might require.
www.belven.com
Stockholm
Dublin
London
Oslo
Amsterdam
Rotterdam Berlin
Paris
Brussels
Luxembourg
ViennaBern
MadridRome
Frankfurt
Hamburg
www.belven.com
Industriepark Mechelen Noord 1Blokhuisstraat 24 l 2800 Mechelen l Belgiumtel. +32 (0)15 29 40 70 fax +32 (0)15 20 14 [email protected] www.belven.com
PROD
OVER
-REV
2-18
0712