[high precision] dovetail slide, post mounted accessories
TRANSCRIPT
-20011 -20021
Q3-Axis Slide with a Shaft
Part Number
STLC48STLXYZ35
[High Precision] Dovetail Slide, Post Mounted
QFeatures: Stages mountable on posts. STLC48 can be mounted directly on Ø16 posts. STLX35 and STLXYZ35 can be used with Ø12 Post Clamps.
Q1-Axis Slide with a Shaft
Accessories for Dovetail Slide StagesBase / Shaft / CCD Camera Adapter / Holder
Q1-Axis Slide with Crossed Mounting Bores
e��Each of the above stages is not provided with any clamping mechanism but, based on its own weight, can prevent itself from being slid as long as the applied load falls within the allowable load range.* When a stage with a clamp is needed, combine a Dovetail Stage (P.1900, 1901), Base Plate and Shaft for stages (P.2002).
Part Name MMaterial SSurface TreatmentStage
Aluminum Alloy Black AnodizeHolder
Part Name MMaterial SSurface TreatmentStage Aluminum Alloy Black AnodizeHolder Low Cadmium Brass Nickel Chrome PlatingShaft EN 1.4305 Equiv. -Washer Low Cadmium Brass Nickel Chrome Plating
Part Name MMaterial SSurface TreatmentStage Aluminum Alloy Black AnodizeHolder Brass Nickel Chrome PlatingShaft EN 1.4305 Equiv. -Washer Brass Nickel Chrome Plating
QFeatures: Accessories can be combined with dovetail stages to form a variety of Post Mounted Stages.
Part Number
XPPT1XPST1XPST3
Part Number
STL-ASTLH
QCCD Camera Adapters
QCCD Camera Holder
QFeatures: Common to all camera manufacturers.
QShaft for Stages (Ø12)
QBase for Stages
Q��Shaft for Stages (with Lever)
• Base Plates to connect the Dovetail Stages (P.1906, 1904, 1900, 1901) and XPST1, 2, 3 (below).
• For applicable stages, see the table below.
XPPT1 XPPT2 XPPT3
223650 22 3650 2250 25
10
Ø8 Counterbore, Depth 5.4(From the Opposite Side)
Ø8 Counterbore, Depth 5.4Ø8 Counterbore, Depth 5.4Ø6 Counterbore, Depth 8
1124.8
24.8 40
202-Ø4.52-Ø4.5
2-Ø4.54-C2
M12xP1.0M12xP1.0
4-M42-M4
4-Ø3.5
M12xP1.0
4-C24-C2
XPST2
XPPT1
223650 22 3650 2250 25
10
Ø8 Counterbore, Depth 5.4(From the Opposite Side)
Ø8 Counterbore, Depth 5.4Ø8 Counterbore, Depth 5.4Ø6 Counterbore, Depth 8
1124.8
24.8 40
202-Ø4.52-Ø4.5
2-Ø4.54-C2
M12xP1.0M12xP1.0
4-M42-M4
4-Ø3.5
M12xP1.0
4-C24-C2
XPST2
XPPT1
S Surface Treatment: Black AnodizeM Material: Aluminum Alloy
10 L(8.5)
M12xP1.0
Ø12
Ø23.
8
XSP50
XPST2
XPPT2
XPST1 (L=241.5)
XPST2 (L=51.5)
10 L(8.5)
M12xP1.0
Ø12
Ø23.
8
XSP50
XPST2
XPPT2
M Material: EN 1.4305 Equiv., Low Cadmium BrassS Surface Treatment: Nickel Chrome Plating
77(21.5)
Ø12
24.5
(35)
51.524.8
180°2229
2-M4, Depth 4
XPPT3
XSL60
XPST3
• Tilt angle can be adjusted easily. (180º Max.)
XPST377(21.5)
Ø12
24.5
(35)
51.524.8
180°2229
2-M4, Depth 4
XPPT3
XSL60
XPST3
M Material: EN 1.4305 Equiv.Low Cadmium Brass
S Surface Treatment: Nickel Chrome PlatingA Accessory: SCB4-8 (2 pcs.)
Part Number Unit Price 1 ~ 10 pc(s).Type No.
XPST123
Part NumberApplicable Stage Accessory: Type M-L (Qty.) Unit Price
1 ~ 10 pc(s).Type No.
XPPT1 XSSL, XSSLC SCB4-8 (2 pcs.), SCB3-6 (4 pcs.)
2 XSP SCB4-8 (4 pcs.)
3 XSL, XSLC, XSB SCB4-8 (6 pcs.)
XNot compatible with XSC.
STL-A STL-A
STLH
21
4.5
Ø12
1/4-20UNC
M Material: EN 1.4305 Equiv.
STL-A
STLH
21
4.5
Ø12
1/4-20UNC
STLH ECan be combined with XWG (P.1904), XYWG (P.1939), ZWG (P.1954), XLWG (P.1908), ZLWG (P.1956), REG (P.1981) and other Dovetail Slide Stages.
25
2-4.52-8
25383.
6
22
8
M5x12(For STL-A Clamp)
(10.2)
XPPT1
XPST2
STLH
STL-A
XSSL50
25
2-4.52-8
25383.
6
22
8
M5x12(For STL-A Clamp)
(10.2)
XPPT1
XPST2
STLH
STL-A
XSSL50
A Accessory: SCB4-8 (2 pcs.), Flat Washers (2 pcs.)
Part Name MMaterial SSurface TreatmentBody Aluminum Alloy Black AnodizeScrew EN 1.4567 Equiv. -
•STL-A
Part NumberUnit Price Volume Discount Rate
1 pc. 2, 3 pcs. 4 ~ 10 pcs.STL-A
•STLH
Part NumberUnit Price
1 ~ 10 pc(s).STLH
PSFAN16
MGNBS100
MGNBSH16-12
XPST3
XPPT1
WSSM16STLH
LFSL1-16-99
CCD Camera
XSSL50XJP36
STL-AXSSL50
0
5
10
5
0
5
0
0
28
48
15
20 40
8-M4xP0.7Depth 8
Ø12, Depth 22(STL-A Mounting Hole)
822 28.5
60 15
Ø33.8
19.5 28 73
Ø16
Throu
gh
Ø16
Dept
h34
48
Ø4M5x22 H.S.C.S.
Ø17.8
Travel
Distan
ce 13.
5Tra
vel Dis
tance
13.5
Shaft Tightening Bar
STLC48Hold the left knob facing the stage surface with the left hand, turn (tighten) the right knob clockwise with the right hand to obtain resilient carriage motion. Turn the right knob counterclockwise (loosen) to obtain quick and smooth carriage motion.
STLX35By turning the preload adjustment screw clockwise with a flathead screwdriver, the stage slides slowly, and by turning counterclockwise the stage slides quickly and smoothly.
10
5
0
5
10
0
0
5
5
0
2035
15
24.5 31
4-M4xP0.7Depth 8Ø12, Depth 22(STL-A Mounting Hole)
8 A
22 22 4 58.5
Ø12
Ø19.
8
Travel
Dista
nce 10
Travel
Dista
nce 10
M5x15 H.S.C.S.
241.
51572
Ø12
2035 31(66)
24.5
(162.9)
90.6
48.8
94.526.822
8
35
24.5
A�
Ø12, Depth 22(STL-A Mounting Hole)
4-M4xP0.7
Trave
l Dist
ance
20Tra
vel D
istan
ce 10
Trave
lDis
tance
10Tra
vel
Distan
ce 10
M5x15 H.S.C.S.
Travel Distance 60
Depth 8
STLXYZ35By turning the preload adjustment screw
clockwise with a flathead screwdriver, the stage slides slowly, and by turning counterclockwise the stage slides quickly and smoothly.
XPST1
MGNBSH16-12
PSFAN16
XPPT1
XSSL100XJP36
XSSL100
e��Economical Scaled Post Unit is available as Simplified Adjustment Units. See ZKB on P.1970
Part Number Travel Distance (mm) Travel per Rotation (mm) Load Capacity (N) Weight
(kg)Unit Price
Type No. X-Axis Y-Axis Z-Axis 1 ~ 10 pc(s).STLC 48 27 - -
1829.4 0.35
STLX 35 20 - - 19.6 0.26STLXYZ 35 20 30 60 19.6 0.96