high performance pva adhesive - cormart-nigeria.com
TRANSCRIPT
CRETEHARD High Performance PVA Adhesive
Cretehard is a high performance and specially developed polyvinyl acetate (PVA)adhesive which when cured provides strong bonds in general application,it is also suitable for use as a concrete additive, primer, bonding of old and new concrete together and sealing agent
Concrete joint fillersPlaster bonding agentBonds old and new concrete togetherBlock making additivePatches and surface primerDust proofer & sealer for concrete floors Heavy duty casting
Stir thoroughly before use.When used as a cement and concrete additive, it can be diluted
Plaster Bonding Agent - Dilute 1 part Cretehard: 4 parts water, apply as a sealing coat and allow todry.- Dilute 1 part Cretehard: 1 part water, apply as a bonding bridge and applyplaster top coat whilst still tacky.- Plaster to be mixed with 1 part Cretehard: 4 parts water
Description
Uses
Mixing
Surface preparation
CORMART�HOUSE,�Plot�A,�Block�2,�Ilupeju�Industrial�EstateApapa-Oworonshoki�ExpresswayLagos,�Nigeria�������������+234�907�005�[email protected]�
Hig
h P
erfo
rman
ce P
VA
Adh
esiv
e Technical Data Sheet
Applications
All surfaces must be free from all delaminated, weak, damaged and deteriorated material, dust, grease, curing compounds, old paint, Efflorescence and other surface contaminants. Ensure Cretehard is well mixed prior to application.
Cement-based mortars Admixture- Adding Cretehard to concrete, cement renders, mortars and plasters willimprove workability, bond performance and final strength of the material.- Dilute 1 part Cretehard: 10 parts water.- As a guide, 2.5kg of Cretehard and 25lts of water is usually sufficient forthe mixing of a 50kg bag of cement
Renders, Patches & Toppings - Dilute 1 part Cretehard: 4 parts water, apply as a sealer coat, allow to dry.- Dilute 4 parts Cretehard: 1 part water, apply to produce a bonding bridge.- Bonding bridge layer must still be sticky when top coat is applied.- Add Cretehard diluted to 1 part Cretehard: 10 parts water to the topping,in place of just water
Surface Primer & Sealer For Walls - Cretehard delivers excellent performance as a surface preparation prior tothe application of acrylic paints, providing effective surface binding and asound key.- Dilute 1 part Cretehard: 4 parts water and apply to substrate surface.- Allow to dry for 24 hours before painting- Not to be over painted with oil based paints.
Dust Proofer & Sealer For Concrete Floors- Cretehard provides excellent penetration and sealing of internal concretefloors to resist oil penetration.- First Coat Dilute 1 part Cretehard to 6 parts water and apply to substrateby roller or brush scrubbing.- Allow to dry for 12 hours before second application and Second coatDilute 1 part Cretehard to 4 parts water and apply as per first coat.
CORMART�HOUSE,�Plot�A,�Block�2,�Ilupeju�Industrial�EstateApapa-Oworonshoki�ExpresswayLagos,�Nigeria�������������+234�907�005�[email protected]�
Storage
All recommenda�ons, s tatements and technical data herein are based on tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty either expressed or implied. User shall rely on his or her own informaon and ̀tests to determine suitability of the product for the intended use and user assumes all risk and liability resul�ng fr om his or her use of the product. Nothing contained in any supplied materials relieves the user of the obligaon ̀t o read and follow the warnings and instruc�on f or each product as set forth in the current Technical Data Sheet, product label and Safety Data Sheet prior to product use away.
Limited Warranty
Technical Data
Packaging
Hig
h P
erfo
rman
ce P
VA
Adh
esiv
e Technical Data Sheet
High Performance PVA Adhesive
Liquid White Creamy
4500 – 5500 cPs
44 – 46%
Appearance Viscosity Total Solids Content Specific Gravity Approx. 1.06 g/ml
3-5 pH Application Temperature 10°C– 35°C
20Ltr,200ltr Drum
Cretehard should be stored in the original container out of direct sunlight between 5°C and 30°C and protected from freezing.For best performance use product within 12 months
Important note Do not use below 10°C Cretehard is not recommended for bonding of plastic and rubber.
Precautions This material is non-hazardous, full Safety Data Sheet is available from CORMART on request.