high performance organic pigments for the paint and coatings
TRANSCRIPT
ASIACINIC CHEMICALS (SHANGHAI) CO., LTD.1730 Huilian Road, Qingpu Industrial ParkShanghai 201707, P.R. ChinaTel:+86 21 5240 0178 Fax:+86 21 5240 0136E-mail: [email protected]
AMERICACINIC CHEMICALS AMERICA,LLC651 Holiday Drive, Foster Plaza 5, Suite 300Pittsburgh, PA 15220, USATel:+1 412 928 3228 Fax:+1 412 202 0839E-mail: [email protected]
www.cinic.com
EUROPECINIC CHEMICALS EUROPE Sàrl9, Croisée des Lys68300 Saint-Louis, FranceTel: +33 3 8989 4476 Fax:+33 3 8989 4493E-mail: [email protected]
High Performance Organic Pigments for the Paint and Coatings
Cinilex-C-EN-02 201105
Our product specific and application information are based upon our current knowledge. They are non-binding and cannot be taken as a guarantee. The users must establish the suitability of individual products itself because their use lies beyond our knowledge and control. We cannot accept any liability relating to the use of our products in particular applications. In addition to that, the legal rights of third parties must always be considered. The specification agreed between the customer and ourselves is the basis upon which our general sales and delivery conditions are set and is the deciding factor concerning any liabilities. Our standard specification is then valid if no specification has been agreed upon between the customer and ourselves.
76
096463.53605040392823212
74
72
70
68
66
82
84
86
88
90Chroma
Hue
80
78
64
62
60
58
56
54
52
50
48
46
44
42
40
38
Yellow SY1H
High Performance Organic Pigments
DPP Orange SJ1C
Yellow SY2T
Yellow SQY
DPP Red SR2P
DPP Red SR1C
DPP Rubine SR5H
DPP Rubine SR6T
Red SR3C
Red SR4C
DPP Red ST
Yellow SY3CYellow SY3CN
Yellow SY3CNIsoindoline
Physical Data and Fastness PropertiesC.I. Name Pigment Yellow 139Density (g/cm3) 1.75Oil absorption (g/100g) 40Specific surface (m2/g) 24.8
Full shade1/3 ISD 7 4 2.7Acid resistance 5Alkali resistance 3-4Over painting 30min@130℃ 4-5Heat stability 30min@150℃ 4-5Heat stability 10min@200℃ 4
LightFastness
Weathering Strength1:X TiO2
Yellow SQYIsoindolinone
Physical Data and Fastness PropertiesC.I. Name Pigment Yellow 109Density (g/cm3) 1.96Oil absorption (g/100g) 49.8Specific surface (m2/g) 32.6
Full shade1/3 ISD 7-8 5 3.3Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 4-5Heat stability 10min@200℃ 4-5
LightFastness
Weathering Strength1:X TiO2
7 4-5
Isoindolinone
Physical Data and Fastness PropertiesC.I. Name Pigment Yellow 110Density (g/cm3) 1.79Oil absorption (g/100g) 45Specific surface (m2/g) 28.6
Full shade 7 51/3 ISD 7-8 4-5 2.1Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
LightFastness
Weathering Strength1:X TiO2
Yellow SY1H
Diketo-pyrrolo-pyrrole
Physical Data and Fastness PropertiesC.I. Name Pigment Orange 73Density (g/cm3) 1.2Oil absorption (g/100g) 50Specific surface (m2/g) 22.5
Full shade 8 51/3 ISD 7-8 4-5 2.2Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 4-5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
LightFastness
Weathering Strength1:X TiO2
DPP Orange SJ1CDiketo-pyrrolo-pyrrole
Physical Data and Fastness PropertiesC.I. Name Pigment Red 254Density (g/cm3) 1.6Oil absorption (g/100g) 63.2Specific surface (m2/g) 98
Full shade1/3 ISD 7-8 4 8.7Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 4-5
LightFastness
Weathering Strength1:X TiO2
- -
DPP Red STDiketo-pyrrolo-pyrrole
Physical Data and Fastness PropertiesC.I. Name Pigment Red 264Density (g/cm3) 1.39Oil absorption (g/100g) 61Specific surface (m2/g) 99
Full shade1/3 ISD 8 5 12.8Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
LightFastness
Weathering Strength1:X TiO2
- -
DPP Rubine SR6T
Diketo-pyrrolo-pyrrole
Physical Data and Fastness PropertiesC.I. Name Pigment Red 254Density (g/cm3) 1.58Oil absorption (g/100g) 48Specific surface (m2/g) 29
Full shade 8 51/3 ISD 8 4-5 7.1Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
LightFastness
Weathering Strength1:X TiO2
DPP Red SR2PDiketo-pyrrolo-pyrrole
Physical Data and Fastness PropertiesC.I. Name Pigment Red 254Density (g/cm3) 1.58Oil absorption (g/100g) 48Specific surface (m2/g) 12
Full shade 8 51/3 ISD 8 5 4.55Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
LightFastness
Weathering Strength1:X TiO2
DPP Red SR1CDiketo-pyrrolo-pyrrole
Physical Data and Fastness PropertiesC.I. Name Pigment Red 264Density (g/cm3) 1.38Oil absorption (g/100g) 49.8Specific surface (m2/g) 31.4
Full shade 8 51/3 ISD 8 5 8.3Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
LightFastness
Weathering Strength1:X TiO2
DPP Rubine SR5HAnthraquinone
Physical Data and Fastness PropertiesC.I. Name Pigment Red 177Density (g/cm3) 1.43Oil absorption (g/100g) 62.8Specific surface (m2/g) 113.5
Full shade1/3 ISD 7 3-4 8.1Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
LightFastness
Weathering Strength1:X TiO2
- -
Red SR4C
Anthraquinone
Physical Data and Fastness PropertiesC.I. Name Pigment Red 177Density (g/cm3) 1.5Oil absorption (g/100g) 57Specific surface (m2/g) 90
LightFastness
Weathering Strength1:X TiO2
Full shade 8 4-51/3 ISD 7 4 9.1Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
Red SR3C
Red SR3C Full Shade
Red SR3C 1/3 ISD
Red SR4C Full Shade
Red SR4C 1/3 ISD
DPP Red SR1C Full Shade
DPP Red SR1C 1/3 ISD
Yellow SQY Full Shade
Yellow SQY 1/3 ISD
DPP RubineSR6T
Full Shade
DPP RubineSR6T
1/3 ISD
DPP OrangeSJ1C
Full Shade
DPP OrangeSJ1C
1/3 ISD
Yellow SY1HFull Shade
Yellow SY1H1/3 ISD
DPP Rubine SR5H1/3 ISD
DPP Rubine SR5HFull Shade
DPP Red SR2P1/3 ISD
DPP Red ST1/3 ISD
DPP Red SR2PFull Shade
DPP Red STFull Shade
Yellow SY2TIsoindolinone
Physical Data and Fastness PropertiesC.I. Name Pigment Yellow 110Density (g/cm3) 1.86Oil absorption (g/100g) 50Specific surface (m2/g) 50.6
Full shade1/3 ISD 7-8 4-5 4.16Acid resistance 5Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
LightFastness
Weathering Strength1:X TiO2
- -
Yellow SY2T Full Shade
Yellow SY2T 1/3 ISD
Yellow SY3C Full Shade
Yellow SY3C 1/3 ISD
Yellow SY3CN Full Shade
Yellow SY3CN 1/3 ISD
7-8 4-5
Yellow SY3CIsoindoline
Physical Data and Fastness PropertiesC.I. Name Pigment Yellow 139Density (g/cm3) 1.46Oil absorption (g/100g) 41Specific surface (m2/g) 26
Full shade1/3 ISD 7 4 2.7Acid resistance 5Alkali resistance 3-4Over painting 30min@130℃ 4-5Heat stability 30min@150℃ 4-5Heat stability 10min@200℃ 4
LightFastness
Weathering Strength1:X TiO2
7-8 4-5
Alkali resistance 5Over painting 30min@130℃ 5Heat stability 30min@150℃ 5Heat stability 10min@200℃ 5
The portfolio of high performance organic pigments consists of a range of high quality and highly durable products for use in the paint and coatings industry. This focused range concentrates on products whose performance characteristics are high chroma, high color strength and high opacity in conjunction with outstanding weather and light fastness. The possibility of both opaque and transparent solutions is available for the majority of the chemistries in the range. Fully compliant with all the regulatory requirements of the global market, this portfolio offers you the possibility to standardize your pigment selection onto just a few products. Whether your requirement is for Automotive OEM, Car Refinish, Industrial, Decorative or Powder Coating applications there is always a solution for you.