hi-torque wood screws – phillips · screw machine products • furniture hardware • metal...

GARDNER SCREW CORPORATIONScrew Machine Products • Furniture Hardware • Metal Fasteners & Stamping • Industrial Supplies

Serving Industry Since 1923

Hi-Torque Wood Screws – Phillips

220 Union Street, Gardner, MA 01440-0862 • Telephone (978) 632-0850 • Fax (978) 632-4606 • Email: [email protected]

www.gardnerscrew.com01F-09/07

Improved gimlet pointsfacilitate easy driving.

Precision helix angleand thread form. Phillips

#3 Recess on#10 Screws

Every inch of thread is always“working”— load does not fallon any one section of thread.

1/8” full shank increasestorsional strength.

Sharp uniform threads cutdeeply and cleanly intomaterial with reduced effort.

Heat-treated to precisespecification andmaximum strength.

• Increased number of threadsallows use of shorter lengthscrews reflecting cost reduction.

• Forging process provides a tougher screw.

• Easier driving means better efficiency —wood fibres are not crushed.



Hi-Torque Wood Screws – Phillips


www.gardnerscrew.com01B-09/07

RECOMMENDED DRILL AND BIT SIZES

eguaGwercSecnaraelCknahS

eloHdooWdraHrofeloHtoliP

dooWtfoSrofeloHtoliPeguaGwercS

dnatalFdaeHlavOsretemaiD

tseraeNnoitcarF

fo.oNottiBreguAerobretnuoC

daeHrofeziSlamiceDnoisnemiD

llirDro.oNretteL

tseraeNnoitcarF

eloHeziS

tseraeNnoitcarF

tseraeN.oNllirD

eloHeziS

tseraeNnoitcarF

tseraeN.oNllirD

2 "680. 24 "23/3 "250. +"46/3 55 "530. +"23/1 56 "46/11 3

3 "990. 73 –"46/7 "360. +"61/1 25 "240. –"46/3 85 "46/31 4

4 "211. 23 +"46/7 "070. –"46/5 05 "050. +"46/3 55 "23/7 4

5 "521. 03 +"8/1 "280. +"46/5 54 "750. –"61/1 35 "4/1 4

6 "831. 72 +"46/9 "390. "23/3 24 "260. "61/1 25 "23/9 5

7 "151. 22 "23/5 "601. –"46/7 63 "660. +"61/1 15 "46/91 5

8 "461. 81 –"46/11 "611. +"46/7 23 "670. –"46/5 84 "46/12 6

9 "771. 41 –"61/3 "821. +"8/1 03 "280. +"46/5 54 "46/32 6

01 "091. 01 +"61/3 "041. "46/9 82 "880. –"23/3 34 "8/3 6

21 "612. 2 +"23/7 "251. –"23/5 42 "201. –"46/7 83 "61/7 7

41 "242. D –"4/1 "661. –"46/11 91 "611. +"46/7 23 "46/13 8

61 "862. I +"46/71 "981. +"61/3 21 "231. +"8/1 92 "23/71 9

81 "492. N –"61/5 "902. +"46/31 4 "541. +"46/9 62 "23/91 01

As every good cabinet worker knows, there isconsiderable variation in condition and grade ofwood. Therefore, any pilot hole recommendationis for average conditions, allowance may have tobe made by a competent craftsman to meetspecific conditions.

Too large a hole provides insufficient gripping surface.An undersize pilot hole likewise weakens the fastening,because the fibre of the wood is crushed and granulationsare packed in the thread root. This sets up stresses whichtend to split or crack the wood.

The following table lists recommended hole diameters,from which the experienced woodworker will varyaccording to his needs.



Recex Lo-Root Screws


www.gardnerscrew.com02-09/07

Sharp point and rapid riseprovides easy penetrationand full thread after firstrevolution.

Minimum bodydiameter minimizesmaterial distortion.

Optimum thread depth tothread spacing ratio minimizescrumbling between threads.

Sharp thread angle cuts intomaterial and prevents splitting,cracking and bursting.

Thread surface nearlyperpendicular to screw axisprovides greatest resistanceto pullout.

Heat-treated formaximum strength.

Square recess and cross-slot combination permitsthe use of productiondrivers in the plant andPhillips screw drivers inyour aftermarkets.

• Longer Bit Life• No Reaming or Cam-Out• Increased Productivity• Faster Driving Times• Freedom From Slippage & Marring• Operator Preference• Reduced Operator Fatigue, Plus• Built-In Aftermarket Serviceability



Zip Drivers – Phillips



Zip Driver Flat Head DeepThread Screws with Nibs andType-17 Point Phillips Recess

• Extra Deep Phillips Recess with added self-countersinking nibs underthe head carves away the material (particleboard and softwoods).

• Type-17 self-drilling point with deep thread practically eliminatesspllitting and bursting in particleboard and softwoods.

Finish Case WeightSize Part No. Black Zinc Qty. lbs.

8 x 1 MFXP08100SN -F -Z 1M 3.64

8 x 1-1/4 MFXP08114SN -F -Z 1M 4.44

8 x 1-1/2 MFXP08112SN -F -Z 1M 5.29

8 x 1-5/8 MFXP08158SN -F -Z 1M 5.82

8 x 1-3/4 MFXP08134SN -F -Z 1M 6.04

8 x 2 MFXP08200SN -F -Z 1M 7

8 x 2-1/4 MFXP08214SN -F -Z 1M 7.71

8 x 2-1/2 MFXP08212SN -F -Z 1M 9.2

8 x 3 MFXP08300SN -F -Z 1M 11.5


8 x 1 BFXP08100SN -F -Z 11M 39

8 x 1-1/4 BFXP08114SN -F -Z 9M 40

8 x 1-1/2 BFXP08112SN -F -Z 7M 37

8 x 1-5/8 BFXP08158SN -F -Z 5.5M 32

8 x 1-3/4 BFXP08134SN -F -Z 4.8M 29

8 x 2 BFXP08200SN -F -Z 4M 28

8 x 2-1/4 BFXP08214SN -F -Z 3.5M 27

8 x 2-1/2 BFXP08212SN -F -Z 2.5M 22

8 x 3 BFXP08300SN -F -Z 2M 22



Zip Drivers – Recex®



Flat Recex® Deep Thread Screwswith Nibs and Type-17 Point

• Patented Recex® Square-Phillips Combination Recess Zip Driverfor drive versatility, insures you always have the correct driver bitto install or adjust your finished wood working project.

• Dependable Type-17 point pre-drills the wood while the nibsunderneath the head allow the fastener to self-countersink itselfinto all types of soft and hardwoods (particleboard and softwoods).


8 x 1 MFRP08100SN -F -Z 1M 3.64

8 x 1-1/4 MFRP08114SN -F -Z 1M 4.44

8 x 1-1/2 MFRP08112SN -F -Z 1M 5.29

8 x 1-5/8 MFRP08158SN -F -Z 1M 5.82

8 x 1-3/4 MFRP08134SN -F -Z 1M 6.04

8 x 2 MFRP08200SN -F -Z 1M 7

8 x 2-1/4 MFRP08214SN -F -Z 1M 7.71

8 x 2-1/2 MFRP08212SN -F -Z 1M 9.2

8 x 2-3/4 MFRP08234SN -F -Z 1M 10.46

8 x 3 MFRP08300SN -F -Z 1M 11.5


8 x 1 BFRP08100SN -F -Z 11M 40

8 x 1-1/4 BFRP08114SN -F -Z 9M 38

8 x 1-1/2 BFRP08112SN -F -Z 7M 35

8 x 1-5/8 BFRP08158SN -F -Z 5.5M 36

8 x 1-3/4 BFRP08134SN -F -Z 4.8M 31

8 x 2 BFRP08200SN -F -Z 4M 20

8 x 2-1/4 BFRP08214SN -F -Z 3.5M 25

8 x 2-1/2 BFRP08212SN -F -Z 2.5M 23

8 x 2-3/4 BFRP08234SN -F -Z 2.5M 23

8 x 3 BFRP08300SN -F -Z 2M 22



Round Washer Screws



Lubricized Stock Finish

Driver Case WeightSize Part No. Size Qty. lbs.6 x 5/8 035541066076 1 15M 398 x 1/2 035542060118 2 12M 428 x 5/8 035542060120 2 12M 448 x 3/4 035542060121 2 10M 438 x 7/8 035542060122 2 8M 388 x 1 035542060123 2 8M 41

8 x 1-1/8 035542063124 2 6M 338 x 1-1/4 035542063125 2 6M 368 x 1-3/8 035542063533 2 5M 328 x 1-1/2 035542063126 2 5M 348 x 1-3/4 035542063127 2 4M 318 x 2 035542063128 2 3M 26

8 x 2-1/4 035542063129 2 9M 198 x 2-1/2 035542063130 2 2M 21

Driver Case WeightSize Part No. Size Qty. lbs.

8 x 2-3/4 035542063131 2 1.5M 208 x 3 035542063132 2 1.5M 19

8 x 3-1/4 035542063133 2 1M 128 x 3-1/2 035542063134 2 1M 1310 x 1/2 035542060170 2 10M 4710 x 5/8 035542060172 2 8M 3910 x 3/4 035542060173 2 8M 4310 x 1 035542060175 2 6M 39

10 x 1-1/4 035542063177 2 5M 3510 x 1-1/2 035542063178 2 3M 2610 x 1-3/4 035542063179 2 3M 3010 x 2 035542063180 2 2.5M 28

10 x 2-1/2 035542063182 2 1.5M 1910 x 3 035542063184 2 1M 18

Round Washer Recex® Lo Root®Type 17 Screws

Lubricized Stock Finish

Driver Case WeightSize Part No. Size Qty. lbs.8 x 1 395542066123 2 8M 41

8 x 1-1/8 395542067124 2 6M 338 x 1-1/4 395542067125 2 6M 368 x 1-1/2 395542067126 2 4M 318 x 1-3/4 395542067127 2 4M 26



Drawer Front Adjusting Screws



Extra large washer built into the head for increased bearing surface and maximum holecoverage. The unique head design is a timesaver for the professional cabinet maker.

Case WeightSize Part No. Finish Qty. lbs.

CWXP08078R2Z 100 0.54

8 x 7/8 MWXP08078R2Z Full Thread 1M 5.4

BWXP08078R2Z 10M 54

8 x 1 BWXP08100R2F Black 7M 46Half Thread

CWXP08100R2Z 100 0.6

8 x 1 MWXP08100R2Z Half Thread 1M 6

BWXP08100R2Z 10M 44

CWXP08118R2Z 100 0.64

8 x 1-1/8 MWXP08118R2Z Zinc 1M 6.43

BWXP08118R2Z Half Thread 6.5M 44

CWXP08114R2Z 100 0.7

8 x 1-1/4 MWXP08114R2Z Zinc 1M 7.03

BWXP08114R2Z Half Thread 6.5M 46

8 x 1-1/2 MWXP08112R2Z Zinc 1M 8

BWXP08112R2Z Half Thread 5M 40

Modified Truss – Phillips Deep ThreadExtra Large Washer Head Screw

1/2" head diameter

Step 1 - Drill oversized 5/16" holes in drawer box.Step 2 - Attach drawer front by driving screws

through box and into drawer front.Step 3 - Adjust drawer front.

(the oversized holes ensure perfect alignment)Step 4 - Fix drawer front with knob or pull screws


8 x 1 MWRP08100S2Z Zinc 1M 6

BWRP08100S2Z Half Thread 7M 43

8 x 1-1/8 MWRP08118S2Z Zinc 1M 6.43

BWRP08118S2Z Half Thread 6.5M 42

8 x 1-1/4 MWRP08114S2Z Zinc 1M 7.03

BWRP08114S2Z Half Thread 6.5M 47

Modified Truss – Recex® Deep ThreadType 17 Extra Large Washer Head Screw

1/2" head diameter



Face Frame / Pocket Screws



The "original" pan head with a higher head height toinsure proper bit fit. Square recess drive fits square bitswith a deeper recess for better grip, incures "slip-proof"driving - no camouts.


6 x 1-1/4 MPSA06114S2F Black T17 1M 4.36

6 x 1-1/4 BPSA06114S2F Black T17 10M 43

6 x 1-1/2 MPSA06112S2F Black T17 1M 4.12

6 x 1-1/2 BPSA06112S2F Black T17 8.5M 35

Pan Head /Square Recess DriveFine Thread /Type 17 Point

The "original" pan head with a higher head height toinsure proper bit fit. Fine thread provides easy drivingand maximum strength in hardwoods.


6 x 1-1/4 MPXA06114S2F Black T17 1M 4.2

6 x 1-1/4 BPXA06114S2F Black T17 10M 40

6 x 1-1/2 MPXA06112S2F Black T17 1M 4.12

6 x 1-1/2 BPXA06112S2F Black T17 8.5M 35

Pan Head /Phillips Recess DriveFine Thread /Type 17 Point

The "original" pan head with a higher head height toinsure proper bit fit. Square recess drive fits square bitswith a deeper recess for better grip. Deep waxed threadoffers easy driving and maximum hold in softwoods andmanmade materials.


7 x 1-1/4 MPSP07114S2F Black 1M 4.22

7 x 1-1/4 BPSP07114S2F Black 9M 39

7 x 1-1/2 MPSP07112S2F Black 1M 5

7 x 1-1/2 BPSP07112S2F Black 6M 30

7 x 1-7/16 BPSP07116S2F Black 6M 30

7 x 1-7/16 BPSP07116S2F Yellow Zinc 6M 30

Pan Head /Square Recess DriveDeep Waxed Thread /Type 17 Point

Serrations under head to lock into frame.Case Weight

Size Part No. Finish Qty. lbs.7 x 1-1/4 MFRH07114S2L Lubricized® 1M 51

7 x 1-1/4 BFRH07114S2L Lubricized® 7.5M 37

7 x 1-1/2 MFRH07112S2L Lubricized® 1M 5.7

7 x 1-1/2 BFRH07112S2L Lubricized® 6M 34

Fillister Head /Recex® DriveHi-Lo™ Thread /Type 17 Point

Larger body for added strength.Case Weight

Size Part No. Finish Qty. lbs.

8 x 1-1/4 BWRP08114F2F Black 7M 38

8 x 1-1/2 BWRP08112F2F Black 5M 31

Round Washer Head /Recex®Drive / Deep Thread /Type 17 Point



Face Frame / Pocket Screws



ApplicationExamples

Thread Styles Drive Styles Head Styles Points



Plated Cabinet Installation Screws – Truss Head



Deep thread and half thread screws for wood applications,commonly used to attach cabinets to wood studs.

Phillips Recess Screws for Wood Studs Recex® Combine with Phillips for Wood Studs


10 x 2-1/2 BTXP10212R3 -F -Z 2M 30

10 x 2-3/4 BTXP10234R3 -Z 2M 34

10 x 3 BTXP10300R3 -F -Z 1.5M 27


10 x 2-1/2 BTRP10212R2 -F -Z 2M 27

10 x 3 BTRP10300R2 -F -Z 1.5M 23

Fine thread and half thread screws commonly usedto attach cabinets to metal studs.

Phillips Recess Screws for Metal StudsNeedle Point for Light Gauge

Phillips Recess Screws for Metal StudsDrill Point for Heavier Gauge


8 x 2-1/2 BTXF08212N2 -Z 2.5M 27


10 x 2-1/2 BTXF10212D32 -Z 2M 31



Drywall Screws



Bugle Head Self-Drill

eziS #traP .ytQ .tW

1x6 001DS M01 sbl33

8/11x6 811DS M01 sbl43

4/11x6 411DS M8 sbl03

8/51x6 851DS M5 sbl32

8/71x6 871DS M4 sbl72

8/32x8 832DS M3 sbl42

8/52x8 852DS M5.2 sbl42

3x8 003DS M2 sbl52

• Posi-Grip drill pointprovides easier cuttingand faster penetration.

• Available in BlackPhosphate or Zinc plated.

• Used for fastening drywallto 14-20 gauge metal studs.

Trim Head Self-Drill

eziS #traP .ytQ .tW

1x6 001DS)P(T M01 sbl03

8/51x6 851DS)P(T M5 sbl22

4/12x6 412DS)P(T M3 sbl91

• Phillips or square drive.• Used for attaching woodtrim or base to 14-20gauge metal studs.

Wafer Lath Self-Drill

eziS #traP .ytQ .tW

2/1x8 210DW M01 sbl14

4/3x8 430DW M8 sbl44

1x8 001DW M5 sbl92

4/11x8 411DW M5 sbl43

8/51x8 851DW M4 sbl43

• Zinc plated, Phil. drive.• For attaching metal lathto heavy gauge (14-20)metal studs.

Bugle Head Sharp eziS #traP .ytQ .tW

1x6 001SS M01 sbl13

8/11x6 811SS M01 sbl23

4/11x6 411SS M8 sbl03

8/51x6 851SS M5 sbl42

2x6 002SS M5.3 sbl12

4/12x6 412SS M3 sbl02

2/12x8 212SS M5.2 sbl52

3x8 003SS M2 sbl32

2/13x01 213SS M5.1 sbl72

4/33x01 433SS M5.1 sbl03

4x01 004SS M5.1 sbl23

2/14x01 214SS M1 sbl63

5x01 005SS M1 sbl72

6x01 006SS M1 sbl92

• Twin lead point forincreased holding powerand faster penetration.

• Available in BlackPhosphate or ZincCoating. (1”-3”)

• Multi-purpose screwused for fastening drywallto 20-25 gauge metalstuds. Phil. recess.

Coarse Hi Thread eziS #traP .ytQ .tW

1x6 B001C 01 M sbl13

8/11x6 B811C M01 sbl23

4/11x6 B411C M8 sbl03

2/11x6 B211C M6 sbl62

8/51x6 B851C M5 sbl42

2x6 B002C M5.3 sbl12

4/12x6 B412C M3 sbl02

4/31x7 B431C M4 sbl12

2x7 XB002C M5.3 sbl32

2/12x8 B212C M5.2 sbl52

3x8 B003C M2 sbl32

2/13x01 B213C M5.1 sbl72

4x01 B004C M5.1 sbl23

• Available in BlackPhosphate, Zinc or ZincYellow Dichromate.

• The most complete line ofcoarse thread drywallscrews. Used in manyapplications, wood to wood,drywall to wood, cabinetinstallation, and outdoorwood decks. Phil. recess.

Trim Head Sharp eziS #traP .ytQ .tW

1x6 001S)P(T M01 sbl03

8/51x6 851S)P(T M5 sbl12

4/12x6 412S)P(T M3 sbl02

3x8 003S)P(T M2 sbl22

• Phillips or square drive.• For attaching wood trim andbase to metal studs.

Wafer Lath SharpeziS #traP .ytQ .tW

61/9x8 Z619W M01 sbl33

4/3x8 Z430W M8 sbl83

1x8 Z001W M5 sbl62

4/11x8 Z411W M5 sbl13

8/51x8 Z851W M4 sbl03

2x8 Z002W M5.2 sbl52

• 9/16 also available in BlackPhosphate.

• For attaching metal lath ork-lath to metal studs20-25 gauge. Zinc finish,Phil. recess.

Size Part # Qty. Wt.






Drywall Screws



Pan Framing Sharp

Laminating Screw

eziS #traP .ytQ .tW

61/7x6 6176SS M51 sbl53

61/7x7 6177SS M51 sbl83

eziS #traP .ytQ .tW

2/11x01 211L M5 sbl83• A temporary fastener forattaching drywall to drywall.Phil. recess.

• Serrations under head toprevent spinning.

• For attaching steel studsto steel track up to 20 gauge.

Trim Head Self-Drill

Cement Board Self-Drill Screws

Pan Framing Self-Drill

eziS #traP .ytQ .tW

61/7x6 6176DS M51 sbl73

61/7x7 6177DS M51 sbl04

61/9x01 61901DS M01 sbl94

• Available in BlackPhosphate or Zincplated. Phil. drive.

• For attaching steel trackto 14-20 gauge metal studs.

Self-Piercing (Slotted) Hex Washer HeadNeedle Point

Wood Screws/Flat Square Head/Coarse Thread

eziS #traP .ytQ .tW

1x6 001DS)P(T M01 sbl03

8/51x6 851DS)P(T M5 sbl22

4/12x6 412DS)P(T M3 sbl91

eziS #traP .ytQ .tW

4/11x8 411RD M5 sbl43

8/51x8 851RD M4 sbl53

4/12x8 412RD M2 sbl22

4/11x8 S411RD M5 sbl43

8/51x8 S851RD M4 sbl53

eziS #traP .ytQ .tW

2/1x8 2108SSH M51 sbl54

4/3x8 4308SSH M01 sbl34

1x8 0018SSH M5.7 sbl73

4/11x8 4118SSH M6 sbl63

2/11x8 2118SSH M5 sbl73

2x8 0028SSH M3 sbl03

2/1x01 21001SSH M41 sbl05

4/3x01 43001SSH M5.7 sbl53

1x01 00101SSH M5 sbl43

2/11x01 21101SSH M3 sbl53

2x01 00201SSH M2 sbl53

eziS #traP .ytQ .tW

1x8 0018SC M01 sbl83

4/11x8 4118SC M8 sbl63

2/11x8 2118SC M6 sbl23

4/31x8 4318SC M4 sbl62

2x8 0028SC M5.3 sbl52

4/12x8 4128SC M3 sbl12

2/12x8 2128SC M5.2 sbl32

3x8 0038SC M2 sbl42

• Phillips or square drive.• Used for attaching woodtrim or base to 14-20gauge metal studs.

• For attaching cementboard to 14-20 gaugemetal studs.

• Special exterior coatingprovides over 500 saltspray hours.

• Extra sharp point forfaster penetration.

• Twin lead thread foreasier installation.

• Used in light metalassembly such aselectrical outlets, framing,and various other sheetmetal applications.

• Slotted head.• Zinc Plated.

• Phillips or square drive.• Black or Zinc finish.• For cabinet installationand other hard wood towood applications.Square drive createsmore positive driving.

•Type “S” point.



Wood Screws - Washers



Weights of Wood ScrewsApprox. Weight of 1000 Steel Wood Screws (in lbs.)

Screw SizeLength #4 #5 #6 #7 #8 #9 #10 #12 #141/4" 0.7 - - - - - - - -3/8" 1.0 1.2 1.4 1.7 2.3 - - - -1/2" 1.2 1.6 1 9 2.3 2.9 3.2 3.8 - -5/8" 1.5 1.8 2.2 2.8 3.2 3.9 4.4 7.5 -3/4" 1.7 2.1 2.7 3.2 3.8 4 5 5.1 78 8.97/8" 2.0 2.5 3.0 3.7 4.2 5.2 5.9 8.1 9.81" 2.4 2.9 3.4 4.1 4.9 5.7 6.6 8.8 10.91-1/4" 2.8 3.3 4.3 5.5 6.2 7.2 8.4 11.0 13.71-1/2" 3.3 4.5 5.3 6.2 7.4 8.6 10.0 13.0 16.51-3/4" 4.2 5.1 6.1 7.3 8.7 10.0 11.4 14.7 18.52" - - 6.9 8.3 9.6 11.3 12.6 17.4 21.32-1/4" - - 8.2 9.5 11.0 12.8 15.0 19.2 24.72-1/2" - - 8.6 10.4 11.7 14.7 16.3 22.4 26.8-2-3/4" - - - - 13.8 15.4 18.8 23.9 29.03" - - - - 14.9 17.4 20.1 26.3 32.13-1/2" - - - - 18.5 22.0 24.3 31.1 37.74" - - - - 22.5 - 29.8 34.1 42.9

American Appx. Appx.Bolt O.D. I.D. Standard lbs./M # ofSize Gauge Pcs. Pc/lb.#4 5/16" 1/8" 21 1/32" - 1650#6 3/8" 5/32" 18 3/64" 1.26 790#8 7/16" 3/16" 18 3/64" 1.7 5853/16" 1/2" 7/32" 18 3/64" 2 3 435#12 9/16" 1/4" 16 1/16" 3.4 2801/4" 5/8" 9/32" 16 1/16" 4.5 2225/16" 11/16" 11/32" 16 1/16" 5.2 1923/8" 13/16" 13/32" 16 1/16" 7.2 1407/16" 59/64" 15/32" 16 1/16" 9.5 1051/2" 1-1/16" 17/32" 13 3/32" 18.3 55

SAE Washers

American Appx. Appx.Bolt O.D. I.D. Standard lbs./M # ofSize Gauge Pcs. Pc/lb.9/16" 1-3/16" 19/32" 13 3/32" 23.4 435/8" 1-5/16" 21/32" 13 3/32" 27.7 363/4" 1-1/2" 13/16" 10 9/64" 47.4 217/8" 1-3/4" 15/16" 10 9/64" 63 161" 2" 1-1/16" 10 9/64" 63 121-1/8" 2-1/4" 1-3/16" 10 9/64" 109 9.21-1/4" 2-1/2" 1-5/16" 9 5/32" 160 6.31-3/8" 2-3/4" 1-7/16" 9 5/32" 190 5.251-1/2" 3" 1-S/16" 9 5/32" 240 4.25



Washers



USS Washers

Flat WashersCountersunkFinishingWasher

American Appx. Appx.Bolt O.D. I.D. Standard lbs./M # ofSize Gauge Pcs. Pc/lb.1-1/4" 3" 1-3/8" 8 11/64" 260 3.81-3/8" 3-1/4" 1.1/2" 7 3/16" 333 31-1/2" 3-1/2" 1-5/8" 7 3/16" 385 2.61-5/8" 3-3/4" 1-3/4" 7 3/16" 448 2.31-3/4" 4" 1-7/8" 7 3/16" 500 21-7/8" 4-1/4" 2" 7 3/16" 569 1.82" 4-1/2" 2-1/8" 7 3/16" 630 1.62-1/4" 4-3/4" 2-3/8" 5 7/32" 826 1.22-1/2" 5" 2-5/8" 4 15/64" 961 12-3/4" 5-1/4" 2-7/8" 3 1/4" 1100 .93" 5-1/2" 3-1/8" 2 9/32" 1300 .8

American Appx. Appx.Bolt O.D. I.D. Standard lbs./M # ofSize Gauge Pcs. Pc/lb.3/16" 9/16" 1/4" 18 3/64" 2.8 3611/4" 3/4" 5/16" 16 1/16" 6.7 1495/16" 7/8" 3/8" 14 5/64" 11.5 873/8" 1" 7/16" 14 5/64" 14.9 677/16" 1-1/4" 1/2" 14 5/64" 24.4 411/2" 1-3/8" 9/16" 12 7/64" 38.5 269/16" 1-1/2" 5/8" 12 7/64" 45.5 225/8" 1-3/4" 11/16" 10 9/64" 77 133/4" 2" 13/16" 9 5/32" 110 9.17/8" 2-1/4" 15/16" 8 11/64" 153 6.51" 2-1/2" 1-1/16" 8 11/64" 188 5.31-1/8" 2-3/4" 1-1/4" 8 11/64" 220 4.5

Wt. PerSize O.D. I.D. M6 .469" .173" 0.88 .531" .209" 1.110 .593" .269" 1.412 .656" .275" 2.114 .781" .324" 2.7

Bolt Fender WashersSize O.D. I.D. Thickness#10 1" 7/32" .051" - 080"1/4" 1" 9/32" .051" - 080"1/4" 1-1/4" 9/32" .051" - 080"1/4" 1-1/2" 9/32" .051" - 080"5/16" 1-1/4" 11/32" .051" - 080"5/16" 1-1/2" 11/32" .051" - 080"3/8" 1-1/4" 13/32" .051" - 080"3/8" 1-1/2" 13/32" .051" - 080"1/2" 2" 17/32" .051" - 080"

GARDNER SCREW CORPORATIONScrew Machine Products • Furniture Hardware • Metal Fasteners & Stamping • Industrial Supplies • Serving Industry Since 1923

Concrete, Masonry Tapping Screws


www.gardnerscrew.comS5-09/07

Combination Hex Washer and Phillips Flat Head Styles

• State-of-the-art thread angles forease of installation and maximumholding power. Designed for todayʼsstructural concrete.

• CR-10 Coating offers high resistanceto corrosion.

• Easily removable for temporaryconstruction situations.

• Shear and tensile values secondto none.

• Highest pull out value with leastpenetration.

• 1” penetration yields as much pull outvalue as 1 1/2” to 2” of penetration ofany other brand.

• Made in the U.S.A.

eziS daeHxeH#traP daeHtalF#traP

4/1-1x61/3 411-3H 411-3F

4/3-1x61/3 431-3H 431-3F

4/1-2x61/3 412-3H 412-3F

4/3-2x61/3 432-3H 432-3F

4/1-3x61/3 413-3H 413-3F

4/3-3x61/3 433-3H 433-3F

4x61/3 004-3H 004-3F

4/1-1x4/1 411-4H* 411-4F*

4/3-1x4/1 431-4H* 431-4F*

4/1-2x4/1 412-4H* 412-4F*

4/3-2x4/1 432-4H* 432-4F*

4/1-3x4/1 413-4H 413-4F

4/3-3x4/1 433-4H 433-4F

4x4/1 004-4H 004-4F

5x4/1 005-4H 005-4F

6x4/1 006-3H 006-4F

stiBllirD

eziS #traP

htiwesUswercs"61/3

2/13x23/5 S235

2/14x23/5 M235

2/15x23/5 L235

stiBllirD

eziS #traP

htiwesUswercs"4/1

2/13x61/3 S613

2/14x61/3 M613

2/15x61/3 L613

2/16x61/3 LX613

2/17x61/3 LXX613

AerutxiFdehcattA

BeloHdellirDfohtpeD

ChtgneL

tiBhtgneL

"4/1-"0 "2/1-1 "4/1-1 "2/1-3

"4/3-"4/1 "2 "4/3-1 "2/1-3

"4/1-1-"4/3 "2/-2 "4/1-2 "2/1-4

"4/3-1-"4/11 "3 "4/3-2 "2/1-4

"4/1-2-"4/31 "2/1-3 "4/1-3 "2/1-5

"4/3-2-"4/12 "4 "4/3-3 "2/1-5

"3-"4/32 "4/1-4 "4 "2/1-5

IN CONCRETEPull Out Load-Pounds

SHEER STRENGTHSheer Load-Pounds

IN HOLLOW BLOCKPull Out (LBS)

POSI-SET™ tested in the lowest PSI Concrete and stillyields twice the pull out value of the other brands.

All fasteners tested were 1/4 diameter.A 3/16” drill bit was used.Embedment in concrete was 1”.(See charts below.)

Fastener Selection Guide

* Available in 18-8 Stainless Steel


All Weather Coarse Deck Screws



Dacro Coated 302 Stainless Deck Screws

eziS #traP .ytQ .tW

1x6 D001C M01 sbl13

4/11x6 D411C M8 sbl03

8/51x6 D851C M5 sbl42

2x6 D002C M5.3 sbl12

2/12x8 D212C M5.2 sbl52

3x8 D003C M2 sbl32

2/13x01 D213C M5.1 sbl72

4x01 D004C M5.1 sbl23

eziS #traP .ytQ .tW

4/11x8 411SD M5 sbl82

8/51x8 851SD M4 sbl92

2x8 002SD M3 sbl52

2/12x01 212SD M2 sbl52

3x01 003SD M5.1 sbl32

2/13x01 213SD M1 sbl81

4x01 004SD M1 sbl12

8/51x7 S851ST M5 sbl52

4/12x7 S412ST M3 sbl12

3x8 S003ST M2 sbl32

• Use in fence, decks, woodsiding, gazebos, or anyexposed exterior application. • #2 square drive.

• Best possible corrosionresistance.

• Large diameterprevents snapping.

• Especially good for cedarand redwood applicationswhere Dacro coating maycause bleeding.

•Type 17 point.•Bugle Head

•Trim Head.

Specialty Self-Drill Screws

Phil Flat Self-Drill With Wings

Thin Wafer Plymetal Self-Drill With Wings

Hex Head Self-Drill Thin Wafer Plymetal Self-Drill

eziS #traP .ytQ .tW

8/7x42-21 8704221 M5 sbl84eziS #traP .ytQ .tW

4/3x61-01 4306101 M7 sbl24

4/3x42-01 4304201 M7 sbl24

1x42-01 0014201 M5 sbl43

4/11x42-01 4114201 M5.3 sbl13

2/11x42-01 2114201 M3 sbl13

eziS #traP .ytQ .tW

2x42-21 00221DF M2 sbl63

2/12x42-21 21221DF M5.1 sbl92

4/32x02-4/1 43241DF M1 sbl13

3x02-4/1 00341DF M1 sbl43

4/13x02-4/1 41341DF C9 sbl03

2/13x02-4/1 21341DF C5 sbl91

4/33x02-4/1 43341DF C5 sbl12

eziS #traP .ytQ .tW

61/71x42-01 6714201 M4 sbl73

• Zinc plated #3 point.#2 Phil. Recess.

• For attaching plywood tometal. Good for flooring,and trailer bed applications.

• Maximum drill capacity .220.

• #4 point. For metal to steelapplications up to 3/8” thick.

• Zinc plated.• Maximum drill capacity .375.

• With shank slot andwings, #4 point.

• Zinc plated #3 Phil.Recess.

• For attaching wood toheavy gauge metal.

• Maximum drillcapacity .375.

• Wings bore out and relievewood chips before breakingoff at metal.

• Zinc plated #3 point.#2 Phil. Recess.

• For attaching plywood to metal.Wings prevent plywood fromclimbing up threads.

• Maximum drill capacity .220.

eziS #traP .ytQ .tW

4/11x42-21 4114221 M4 sbl84

2/11x42-21 2114221 M2 sbl62

2x42-21 0024221 M2 sbl63

• #5 point. For metal to steelup to 1/2” thick.

• Zinc plated.• Maximum drill capacity .500.



Machine Screws



Drives

Head Styles

Machine Screws - Phillips Machine Screws - Slotted


Choosing and Using the Right Screw



Head Types

Production Screws (shown actual size)

Traditional Wood Screws (shown actual size)

Gauge 4 6 8 10 12 14

Gauge 2 3 4 5 6 7 8 9 10 12 14

hi-torque wood screws – phillips · screw machine products • furniture hardware • metal...

Documents