hi performance crate engines from gm performance...

En

gin

es &

Co

mp

on

en

ts

408

KK

Toll Free Order Line 800.854.1280

Base/Base+ EnginesThe base engine assembly typically includes, block, crank, pistons, cam, heads and valve covers, but allows the builder to pick the carburetor/injection system and intake manifold they desire. Base+ engines include an intake manifold, and on select models, a distributor also.

Turn-Key EnginesWe told our engineers to have some fun and assemble engines the way they think it should be done … we then took their combinations, built them up and put them in a crate that ships right to your dealer. The turn-key engines represent an outstanding value, and they are perfect for enthusiasts who have built a chassis and need reliable power to get it down the road.

Deluxe EnginesThe deluxe crate engines are essentially ready to fi re up, as they ship with the distributor installed, harmonic balancer bolted on and the carburetor in the crate. All you need to do is put the parts together and go!

Different Levels of Engine AssembliesClassic Industries offers three distinct levels of GM Crate Engines, covering the gamut from long blocks to complete turn-key engines. This variety gives classic car builders the opportunity to customize an engine as much or as little as they need to, to meet their expectations. For additional engine choices and more information about GM Performance engines, visit us online at http://www.classicindustries.com!

Warranty InformationGM Performance Parts Crate Engines feature a 24-month or 50,000-mile limited warranty. GM Components include a 12-month or 12,000-mile limited warranty. GM Performance Parts Racing Crate Engines are excluded from limited warranty. GM Parts Engines offer a 36-month or 100,000-mile limited warranty when the engine is installed in a recommended application.

Hi Performance Crate Engines From GM Performance Parts350/290HP Base EngineThe best value crate engine in the GM Performance Parts lineup! The 350/290 is an answer to those car crafters who demand maximum return on their money. However, just because it’s affordable, don’t think that it’s a stone. The 350/290 delivers 290 hp @ 5100 rpm and a solid 326 lb.-ft. of torque at 3750 rpm.

Specifi cations:Engine Type: Chevrolet small block V8Displacement: 350 cubic inchBore x Stroke: 4.00" x 3.48"Camshaft Specs: Lift: .450" int/.460" exh Duration: 222° int/222° exh @ .050" Valve Size: 1.94" intake/1.50" exhaust Compression Ratio: 8.5:1 Rocker Arm Ratio: 1.5:1 Recommended Fuel: 87 octane Timing: Base 10° BTDC, 32° Total Maximum Recommended RPM: 5100 Balanced: Internal

Installation Notes• Use internally balanced fl explate P/N G9289 for automatic transmission or fl ywheel P/N G7138 for manual transmission (not included).• Power ratings based on Holley 670-cfm carburetor (not included).• Does not accept GM Performance Parts roller lifter assemblies.• Recommended use in vehicles 6000lb GVW or less.Note: Special order, prepaid only. Shipped truck freight. No further discounts apply.

G13013 ........................ 2274.99 ea

ZZ383/425HP Base EngineBig block power from a small block engine! For the ultimate GM Performance Parts small block crate engine, choose the ZZ383, a combination of Fast Burn aluminum performance heads and a 383 stroker small block that adds up to 425 horsepower and 449 lb.-ft. of torque. The ZZ383 has a specially machined engine block and 3.80"-stroke crankshaft, which produce 383 cubic inches of pure performance.

Specifi cations:Engine Type: Chevy small block V8Displacement: 383 cubic inchBore x Stroke: 4.00" x 3.80"Camshaft Specs: Lift: .509" int/.528" exh Duration: 222° int/230° exh @ .050" Valve Size: 2.00" intake/1.55" exhaust Compression Ratio: 9.6:1 Rocker Arm Ratio: 1.5:1 Recommended Fuel: 92 octane Timing: Base 10° BTDC, 32° Total Maximum Recommended RPM: 6000 Balanced: ExternalInstallation Notes• Comes with 12.75" automatic transmission fl explate. Requires 1986-99 350 style externally balanced fl ywheel for manual transmissionNote: Special order, prepaid only. Shipped truck freight. No further discounts apply.

G13022 ........................ 6119.99 ea

Important: Designed for pre-1979 street vehicles or any off-road vehicle. Not intended for marine applications. Some applications may affect engine warranty. Some applications may not be emission legal; check state and local ordinances. GM Performance Parts does not utilize any used or remanufactured parts in this crate engine.

350 HO/330HP EngineThe 350 HO is based on a tough, Chevy four-bolt block. The high-lift camshaft is based on the 1965-67 Corvette 327 engines, but it has even more lift and duration. The Turn-Key engine is complete from top to bottom, with the intake manifold, carburetor, water pump, and distributor. You get everything you need for a complete, running engine right out of the crate. We even ship it with an accessory drive package, fuel pump, starter, and spark plug wires. One level down is the 350 HO Deluxe which comes only with the intake, carburetor, water pump, and distributor. Finally, the base model gives you all of the same internal components as the Deluxe and Turn-Key including chrome valve covers and timing cover, but it comes without the intake manifold, carburetor, water pump, balancer, distributor, and dampener.

Specifi cations:Engine Type: Chevy small block V8Displacement: 350 cubic inchBore x Stroke: 4.00" x 3.48"Camshaft Specs: Lift: .435" intake/.460" exhaust Duration: 212° int / 222° exh @.050" Valve Size: 1.94" intake/1.50" exhaust Compression Ratio: 9.1:1 Rocker Arm Ratio: 1.5:1 Recommended Fuel: 92 octane Timing: Base 10° BTDC, 32° Total Maximum Recommended PRM: 5500 Balanced: External

Installation Notes• Counterweighted fl explate for auto transmission.• Change to externally balanced fl ywheel for manual transmission applications.• Right-side oil dipstick.

Note: Special order, prepaid only. Shipped truck freight. No further discounts apply.

G13014 Turn-Key ........ 5409.99 ea G3509 Deluxe ............ 4349.99 ea G13015 Base Engine .... 3259.99 ea

G13015

G3509

G13014

GMPP Crate Engines

KK

En

gin

es &

Co

mp

on

en

ts

409

Ram Jet 350 Deluxe EngineEvoking the nostalgic look of the early fuel injection systems, but instead of a mechanical injection system, the Ram Jet 350 is fed by a state-of-the-art, electronically controlled port fuel injection system. The engine comes with the necessary wiring harness and detailed installation instructions.

Specifi cations:Engine Type: Chevy small block V8Displacement: 350 cubic inchBore x Stroke: 4.00" x 3.48"Camshaft Specs: Lift: .431" intake/.451" exhaust Duration: 196° int/206° exh @ .050" Valve Size: 1.94" intake/1.50" exhaust Compression Ratio: 9.4:1 Rocker Arm Ratio: 1.6:1 Recommended Fuel: 92 octane Timing: Base 10° BTDC, 32° Total Maximum Recommended RPM: 5500 Balanced: External

Installation Notes• Comes with ext balanced, manual trans fl ywheel.• Change to ext balanced fl explate for auto trans.


G3508 ........................ 6389.99 ea

R J 350 D l E iHi Performance Crate Engines From GM Performance Parts

ZZ4 350/355HP EngineAn aluminum-headed 350 that makes 355 horsepower and 405 lb.-ft. of torque! The ZZ4 350 Turn-Key crate engine is one of the most popular high performance crate engines ever produced. The ZZ4’s Corvette-derived high-performance heads feature high velocity intake runners and D-shaped exhaust ports to promote efficient and unobstructed fl ow through the engine—providing strong power and torque at all rpm levels. The Base ZZ4 350 engine is delivered with an aluminum dual-plane intake manifold, HEI distributor, cast iron water pump, dampener, and fl explate. Our Turn-Key ZZ4 350 crate engine also ships with all the parts you need to get it running. That includes an accessory drive package, fuel pump, chrome air cleaner kit, Holley 770-cfm carburetor, starter, and spark plug wires. With its high level of performance and durability, it could very well be the perfect crate engine. Your choice of base engine or Turn-Key engine.

Specifi cations:Engine Type: Chevrolet small block V8Displacement: 350 cubic inchBore x Stroke: 4.00" x 3.48"Camshaft Specs: Lift: .474" int/.510" exh Duration: 208° int/221° exh @.050" Valve Size: 1.94" intake/1.50" exhaust Compression Ratio: 10:1 Rocker Arm Ratio: 1.5:1 Recommended Fuel: 92 octane Timing: Base 10° BTDC, 32° Total Maximum Recommended RPM: 5800 Balanced: External

Installation Notes• Comes with 12.75" externally balanced automatic transmission fl explate.• Change to externally balanced fl ywheel for manual transmission applications.• Requires fuel line from fuel pump to carburetor.• Fuel pump pressure is pre-set, fuel pressure regulator not required.• Some assembly and engine tuning may be required.


G13016 Turn-Key ........ 5779.99 ea G13293 Base engine .... 6242.99 ea

24-month/50,000-mile limited warranty.

G7166

G13016

ZZ502/502HP EngineOne horse per cube has long been a mark of great engines. Today, the standard is met in the ZZ502, an engine that is not just bigger, but better than the competition. The base engine is a convenient partial engine assembly. You get the big block V8, four-bolt main muscle and just enough of the “fi nish work” to take the headache out of choosing parts—without missing out on the fun stuff! For those of you who want your ZZ502/502 already assembled, the ZZ502/502 Deluxe crate engine includes the entire engine, from carb to oil pan, and comes assembled from the factory. It includes a Holley 870-cfm four barrel carburetor, dual-plane intake manifold CNC-port matched to the oval-port heads, starter, distributor, plug wires, and water pump. The ZZ502/502 Deluxe crate engine offers you a GM Performance Parts tested and validated 502 horsepower/567 lb.-ft. of torque. The ZZ502/502 comes with our aluminum oval-port, big-valve street heads that fl ow enough air to satisfy the demands of the hungry 4.47" bores and 4.00" stroke crankshaft.

Specifi cations:Engine Type: Chevy big block V8Displacement: 502 cubic inchBore x Stroke: 4.47" x 4.00"Camshaft Specs: Lift: .527" intake/.544" exhaust Duration: 224° int/234° exht @ .050" Valve Size: 2.25" intake/1.88" exhaust Compression Ratio: 9.6:1 Rocker Arm Ratio: 1.7:1 Recommended Fuel: 92 octane Timing: Base 8° BTDC, 30° Total Maximum Recommended RPM: 5800 Balanced: External

Installation Notes• Clutch linkage boss is cast into block, but must be drilled and tapped. • When using cast iron exhaust manifolds, lower head bolts may need to be replaced with bolts with shorter heads for clearance.• Requires electric fuel pump because the Gen VI block has no mechanical pump boss.• Comes with a 14" auto transmission fl explate.Note: Special order, prepaid only. Shipped truck freight. No further discounts apply.

G3434 Deluxe ............ 9689.99 ea G3433 Base engine .... 8399.99 ea

454 HO Base+ EngineMusclecar power at a low-buck price! We started with a brand new Gen VI four-bolt big block, and cast iron cylinder heads deliver a pump-gas friendly 8.75:1 compression ratio. Horsepower comes in at 425 with 500 lb.-ft. of big-block torque. The 454 HO is delivered to you complete with water pump, balancer, intake manifold, and 14" automatic transmission fl explate.

Specifi cations:Engine Type: Chevy big block V8Displacement: 454 cubic inchBore x Stroke: 4.25" x 4.00"Camshaft Specs: Lift: .510" intake/.540" exhaust Duration: 211° int/230° exh @ .050" Valve Size: 2.19" intake/1.88" exhaust Compression Ratio: 8.75:1 Rocker Arm Ratio: 1.7:1 Recommended Fuel: 92 octane Timing: Base 4° BTDC, 26° Total Maximum Recommended RPM: 5500 Balanced: External

Installation Notes• Clutch linkage boss is cast into block, but must be drilled and tapped. • When using cast iron exhaust manifolds, lower head bolts may need to be replaced with bolts with shorter heads for clearance.• Comes with a 14" automatic transmission fl explate; use fl ywheel P/N 14096987 and 11" clutch assembly for manual transmission.


G7167 ........................ 6359.99 ea

24-month/50,000-mile limited warranty.

GMPP Crate Engines

5.3L E-Rod EngineThe E-Rod 5.3L is rated at 315 HP and 335lb/ft TQ. All engines include the necessary engine controller with specific calibrations for automatic or manual transmissions. Other components include: Engine Wiring Harness, Exhaust Manifolds, Catalytic Converters, O2 sensors/sensor bosses, fuel tank evaporative emissions canister, mass air fl ow sensor and sensor boss, Accelerator pedal (for use with GMPP electronic throttle), air fi lter and instruction manual. In addition each engine requires a front accessory drive/transmission control system suited to your build. For more detailed information about E-Rod engines, visit our website.

Specifi cations:Engine Type: LS-series Gen IV small block V8Displacement: 327 (5.3L)Bore x Stroke: 3.780"x 3.620" (96 x 92 mm)Camshaft Specs: Lift: .467" intake/.479" exhaust Duration: 196° int/201° exh @ .050" Valve Size: 1.890" intake/1.550" exhaust Compression Ratio: 9.5:1 Rocker Arm Ratio: 1.7:1 Recommended Fuel: 87 octane Maximum Recommended RPM: 6000 Balanced: InternalNote: Special order, prepaid only. Shipped truck freight. No further discounts apply.

G13201 automatic ........ 6959.99 ea G13202 manual ............ 6959.99 ea

6.2L LS3 E-Rod EngineBased on the Corvette's 430 HP 6.2L all-aluminum LS3 engine. All engines include the necessary engine controller with specifi c calibrations for MT or AT confi gurations. Other components supplied include: Engine wiring harness, Exhaust manifolds, catalytic converters, O2 sensors/sensor bosses, Accelerator pedal (for LS3 electronic throttle), air filter and instruction manual. In addition each engine requires a front accessory drive/transmission control system suited to your build. For more detailed information about E-Rod engines, visit our website.

Specifi cations:Engine Type: LS-Series Gen IV Small block V8Displacement: 376 cubic inch (6.2L)Bore x Stroke: 4.60" x 3.620" Camshaft Specs: Lift: .551" intake/.522" exhaust Duration: 204° int/211° exh @ .050" Valve Size: 2.165" intake/1.590" exhaust Compression Ratio: 10.7:1 Rocker Arm Ratio: 1.7:1 Recommended Fuel: 92 octane Maximum Recommended RPM: 6600 Balanced: InternalNote: Special order, prepaid only. Shipped truck freight. No further discounts apply.

G13203 automatic ........ 8719.99 ea G13204 manual ............ 8719.99 ea

G13201

G3434

G3433

En

gin

es &

Co

mp

on

en

ts

410

KK

Toll Free Order Line 800.854.1280ATK Remanufactured Engines

All of ATK’s manufacturing facilities have achieved both QS-9000 and ISO 9001 certifi cation levels, one of the few engine remanufacturers in the world to have done so. In addition, ATK’s

parent company VEGE Motoren has also achieved ISO 9001 certifi cation. This is particularly signifi cant as it represents both an engineering and a manufacturing certifi cation.

There are over 150 processes involved in remanufacturing an ATK engine. Featured procedures include:

ATK Remanufactured Engine Warranty Information:At Classic Industries®, we know that supplying a great product is only part of the job. The staff at ATK is made up of dedicated professionals whose only job is to support you, the Classic Industries® customer. From the moment you call on ATK, whether to request technical assistance, or inquire about their warranty, they are dedicated to providing solutions and support. That’s the ATK promise. Classic Industries® and ATK have always been leaders in innovation, offering products, warranties and programs that have redefi ned the industry. That leadership is evident in our products and our support. ATK warrants to the original purchaser that each engine sold by Classic Industries® shall be free of defects in material and workmanship under normal use and with periodical maintenance as set forth by the original manufacturer subject to the following terms and conditions.

Defi nitions:Engine: As used in this warranty refers to the remanufactured assembly (basic block, cylinder head and internal components) as supplied by ATK.Term: Standard Warranty: This warranty shall exist for 3 years and Unlimited miles. Warranty term begins on date of installation. The Standard Warranty applies to all ATK products with the following exceptions:Diesel Engines carry a warranty term of 12 months or 12,000 miles whichever occurs fi rst.Trucks Over 11,000 GVW (Gross Vehicle Weight) carry a warranty term of 12 months or 12,000 miles whichever occurs fi rst.Motorhomes: Class A or Motorhomes over 11,000 GVW are NOT COVERED by the ATK warranty. ATK expressly does not offer engines for these applications. Please be aware that only engines designed expressly for large motorhomes should ever be used in such an application. ATK does not catalog nor prepare engines for these applications and therefore takes no responsibility when an ATK engine is used in this manner.Product Replaced Under Warranty:Product replaced under warranty carries the remainder product’s warranty term.Standards:Subject to the limitations listed herein. ATK, at its option, shall repair or replace a product within the warranty term after determination by ATK that the product is defective. All products are to be returned to ATK for inspection. Products not returned to ATK will not be warranted. All repairs and/or replacements covered by this warranty must be authorized by ATK. Unauthorized repairs will not be paid.Limitations:This warranty applies to products originally supplied by ATK. This warranty does not apply to or include any of the following:A. Damage as a result of OVERHEATING, LACK OF LUBRICATION or CONTAMINATION.B. Damage resulting from PRE-IGNITION or DETONATION. This includes but is not limited to: melted or broken pistons, broken piston rings, damaged cylinder heads, leaking head gaskets, etc. For more information regarding pre-ignition and detonation please contact our Customer Service Department.C. Repair or replacement required as a result of any accident or misuse.D. Repair or replacement of any accessory or service item, including specifi cally but not limited to: all components of the cooling, fuel, electrical and ignition systems in addition to all belts, hoses, and fi lters.E. Any product used for competition racing or related purposes.F. Any product to which a device or accessory not conforming to original manufacturer’s specifi cations has been installed.G. Any product on which periodic maintenance services required by the original manufacturer have not been performed. Limited Liability:ATK’s liability under this warranty is limited solely to the repair or replacement of defective product. ATK shall not be liable for any incidental, special, consequential or exemplary damages, including but not limited to rental cars, towing fees or for any service not expressly provided for herein, relating to or arising from the ATK product.Limited Warranty:This warranty is given in lieu of all other warranties, expressed or implied, including any warranty of merchantability, or fi tness for a particular purpose, on the part of ATK or the dealer installing the engine. No dealer nor any agent or employee thereof, is authorized to extend or modify this warranty.Labor Payments:ATK authorized repairs will be compensated at a rate not to exceed 100% of the applicable fl at rate schedule as published by Chilton, Mitchell or Motors Repair Manuals. Hourly rates for all authorized labor claims will be paid in accordance with the original installation rate, not to exceed $42.00 per fl at rate hour. Do-it-yourself repairs, and repairs performed by unlicensed repair facilities, will be paid at a rate not to exceed $15.00 per fl at rate hour.Additional Owner/User Obligations:Initial Startup: Valves must be readjusted to manufacturer’s specifi cations. Due to various component designs, cylinder head re-torque may or may not be required in your particular application. Refer to factory shop manual for the proper procedure for your engine type. If for any reason you are unsure what action to take please contact our Customer Service Department via our Toll Free telephone number.First Service Between 600-1000 Miles After Installation: Oil and oil fi lter must be changed, valves readjusted and cylinder heads re-torqued (refer to initial startup instructions). Failure to perform these basic operations may result in a voided warranty.

Engine blocks magnafl uxed, bored, precision-honed and mains line-honed Camshaft bearings line-bored for accurate center-to-center clearance Engine blocks and cylinder heads precision surfaced. Cylinder heads magnafl uxed and machined for three-angle valve seats Crankshafts stress-relieved, precision ground and micro-polished Camshafts precision ground or replaced with new Each engine tested (most hot-run tested) for compression, oil pressure, oil leaks, engine noise and general operating condition before shipment.

Remanufactured Engines

The No Fault Gold Warranty Program Includes:Rental Car up to $150!Rental car expense reimbursed for 5 days/ $30 per day up to $150Towing Up to $100!Towing reimbursed on approved claims up to $100 per occurrence.Increased Labor Rate Up to $95 per hourIncrease labor rates to cover approved repairs up to $95 per hourFluids Up to $25!Cost of fl uids is reimbursed on approved claims up to $25

ATK now offers the No Fault Gold Warranty Program for you to purchase in addition to the Industry Leading standard ATK warranty already included with our remanufactured engines. This added protection policy covers expenses not included in ATK’s standard warranty. Coverage is based on hourly rates established by Chilton, Motor and Mitchell manuals.

Introducing ATK’s No Fault Gold Warranty Program.An added protection program that covers car rental, towing, an increased labor rate and fl uids on all approved claims.

How does the core charge work?Upon ordering, you will be charged the retail price of the engine plus the core charge. When your engine arrives, you will save the crating that it is shipped in, so that you can use it to package your core. Once the core is ready to ship, you will call ATK for core pickup. ATK will then inspect the core to make sure it meets the following criteria. Providing the core meets all of the criteria, you will be refunded the core price.

Core Policy: All fl uids must be drained prior to core return. Cores must be complete and in rebuildable condition. Core returned must be identical to the engine purchased in size and application. ATK reserves the right to refuse any core that has been modifi ed or altered.Note: Core prices can fl uctuate according to supply, demand and availability. If you plan to return a core for credit, please confi rm the core price with your salesperson prior to ordering. No further discounts apply.

ATK No Fault Gold Warranty Program is an additional $225.00

NO Fault Gold Warranty Program

Standard ATK Warranty

Rental Towing Max. Hourly Labor Rate

YES YES Up to $95

NO NO Up to $50

KK

En

gin

es &

Co

mp

on

en

ts

411ATK Remanufactured Engines

Part # Years C.I.D./L V.I.N Code Description + Core PriceDC38 82-84 173 2.8 V6 1 block #068, 889, 818, carbureted only 260 1709.99 ea DC088 85-86 173 2.8 V6 S block #061, FI only 260 1709.99 ea DCAl 87 173 2.8 V6 S block #457, 695, crank #817, FI 260 1709.99 ea DCA7 88-89 173 2.8 V6 S block #457, 695, crank #526, 481, FI 260 1709.99 ea DCB7 90-92 191 3.1 V6 T FI, cast iron heads, block #457, 695, crank #981, for use w/distributor type ignition, passenger side starter 285 1889.99 ea DCC9 93-95 207 3.4 V6 S block #608, cast iron heads #884, crank #981, with crank & cam sensor 285 2034.99 ea DP06 77-81 301 4.9 V8 Y no smog, non turbo 260 2174.99 ea DC04 76-79 305 5.0 V8 G,H,Q,U driver side dipstick, 7 exhaust manifold bolts on both heads 260 1524.99 ea VC04 76-79 305 5.0 V8 G,H,Q,U same as DC04 (above) except with valve covers, timing cover and oil pan 260 1629.99 ea DC05 78-85 305 5.0 V8 G,H,F,S passenger side dipstick, 7 exhaust manifold bolts on both heads 260 1524.99 ea VC05 78-85 305 5.0 V8 G,H,F,S same as DC05 (above) except with valve covers, timing cover and oil pan 260 1614.99 ea DC095 86 305 5.0 V8 F,G,H carb or FI, block #551, head #416, 301, 601, full circle rear main seal 260 1659.99 ea VC95 86 305 5.0 V8 F,G,H same as DC95 (above) except with valve covers, timing cover and oil pan 260 1759.99 ea DCA5 86 305 5.0 V8 F,G,H FI, non-roller, block #766, valve cover bolts around edge of cover 260 1709.99 ea DCB3 87-88 305 5.0 V8 G,H carb, non-roller, block #627, 058, head #081, 187, center valve cover bolts 260 1709.99 ea VCB3 87-88 305 5.0 V8 G,H same as DCB3 (above) except with valve covers, timing cover and oil pan 260 1814.99 ea DCM7 87-94 305 5.0 V8 F TPI, FI, HO roller cam, block #627, 058, head # 081, 187, center valve cover bolts 260 1864.99 ea DC036 87-95 305 5.0 V8 E EFI, roller cam, block #627, 058, head #081, 187, center valve cover bolts 260 1759.99 ea VC36 87-95 305 5.0 V8 E same as DC36 (above) except with valve covers, timing cover and oil pan 260 1864.99 ea DCA9 87-95 305 5.0 V8 H FI, non-roller, block #627, 058, head #081, 187, center valve cover bolts 260 1709.99 ea VCA9 87-95 305 5.0 V8 H same as DCA9 (above) except with valve covers, timing cover and oil pan 260 1814.99 ea DP28 73-77 350 5.7 V8 smog holes head, specify head # 2-3/4" crank centering ring, splash shield to #2 & #4 main 310 2359.99 ea DC013 78-80 350 5.7 V8 H,J,K,L,X,4,8 2 bolt main, driver side dipstick, 7 exhaust manifold bolts on passenger side head 385 1689.99 ea VC13 78-80 350 5.7 V8 H,J,K,L,X,4,8 same as DC13 (above) except with valve covers, timing cover and oil pan 385 1794.99 ea DC15 78-80 350 5.7 V8 H,J,K,L,X,4,8 4 bolt main, driver side dipstick, 7 exhaust manifold bolts on passenger side head 410 1713.99 ea VC15 78-80 350 5.7 V8 H,J,K,L,X,4,8 same as DC15 (above) except with valve covers, timing cover and oil pan 410 1819.99 ea DC011 78-85 350 5.7 V8 L,M,P,6,8 2 bolt main, passenger side dipstick, 7 exhaust manifold bolts on passenger side head 385 1709.99 ea VC11 78-85 350 5.7 V8 L,M,P,6,8 same as DC11 (above) except with valve covers, timing cover and oil pan 385 1814.99 ea DC096 86 350 5.7 V8 K,L,M,6,8 2 bolt main, non-roller, block #548 310 1809.99 ea VC96 86 350 5.7 V8 K,L,M,6,8 same as DC96 (above) except with valve covers, timing cover and oil pan 310 1914.99 ea DCA3 87-95 350 5.7 V8 7 EFI, 2 bolt main, roller cam, block #638, 548, 148, center valve cover bolts, will not fi t 1993 & up LT-1 310 1824.99 ea VCA3 87-95 350 5.7 V8 7 same as DCA3 (above) except with valve covers, timing cover and oil pan 310 1924.99 ea DCN7 89-92 350 5.7 V8 8 TPI, HO, roller cam, 2 bolt main, block #148, 548, 638, head #083, 217, will not fi t aluminum head Corvette 410 2014.99 ea DCM3 93-94 350 5.7 V8 P SFI, Gen II, LT-1, roller cam, aluminum heads, block #327, head #649, for 1993-94 Firebird 510 2634.99 ea DCF8 94-95 350 5.7 V8 P FI, LT-1, roller cam, cast iron heads, block #327, head #320 310 2434.99 ea DCR9 95 350 5.7 V8 P SFI, Gen II, LT-1, HO, roller cam, aluminum heads, block #327, head #374, for 1995 Firebird 510 2684.99 ea DCT1 96 350 5.7 V8 P LT-1, roller, cast iron heads, block #327, head #290 310 2434.99 ea DCT2 96-97 350 5.7 V8 P FI, LT-1, roller cam, aluminum head, block #327, head #649, for 1996-98 Firebird 510 2634.99 ea DP11 73-76 400 6.6 V8 R,S,Z no smog, block #988, 557. head #4x, 6x, 5c, 2-3/4" crank centering ring 310 2244.99 ea DP10 75-79 400 6.6 V8 R,S,Z smog, specify head #, 2-1/2" crank centering ring, 5 motor mount on left 4 on right side 310 2244.99 ea DP12 75-79 400 6.6 V8 R S,Z no smog, specify head #, 2-1/2" crank centering ring, 5 motor mount on left 4 on right 310 2444.99 ea DP67 76-79 400 6.6 V8 R,S,Z smog, block #557, 934, head #4x, 6x, 5c, 2-1/2" crank centering ring 310 2244.99 ea DO02 1977-79 403 6.6 V8 K AT, without smog holes in each head over the exhaust ports, block casting numbers 5572654B and 5544990 285 2164.99 ea DO12 1977-79 403 6.6 V8 K AT, with smog holes in each head over the exhaust ports, block casting numbers 5572654B and 5544990 285 2164.99 ea NFWG All No Fault Gold Warranty Program added protection program additional to the ATK 3 Year/Unlimited Milage Standard Warranty 225.00 ea

Classic Industries® & ATK Team Up To Bring You The Best Remanufactured Engine In The Industry!

ATK is dedicated to continual improvement in the processes and procedures for every engine that they manufacture. This insures our ability to offer the very latest products and the highest quality remanufactured units in the industry. Their manufacturing techniques have been perfected to the point where they now offer us increased capacity, thus resulting in lower pricing on many applications. With an industry leading warranty, ATK is

now our top engine supplier. We are dedicated to distributing the highest quality engines in the market. We’re also dedicated to setting the industry standard in customer service. We believe that once you’ve experienced the quality of ATK products, you’ll agree there is no better engine source than ATK from Classic Industries®. Call today for complete details. Important: All engines come without valve covers, timing cover and oil pan unless otherwise noted. Shipped anywhere in the Continental United States for $50.00. Note: No further discounts apply.

En

gin

es &

Co

mp

on

en

ts

412

KK


350/351HP VortecThe 350ci Vortec engine produces 351 hp and 400 lbs of torque when used with a performance carburetor and manifold combination. Includes oil pump, black painted oil pan and chrome timing cover and valve covers installed. Just add your own fuel and ignition components.Important: Not intended for EFI.Specifi cationsHP: 351Torque: 400Engine Type: Chevy small block V8Displacement: 350 ciBlock: 4 bolt main/rollerCrankshaft: OE 1 piece sealBore/Stroke: 4.030 x 3.480Rods: powder metal Pistons: hypereutecticRings: molyCamshaft Type: HYD rollerCamshaft Lift: .495 in x .502 exDuration @ .50: 220 in x 224 exCylinder Heads: OE cast iron VortecChamber Size: 64 ccValve Size: 1.94 in x 1.50 exIntake Runner Volume: OECompression Ratio: 9.6:1Rocker Arms: 1.5:1 stamped steelRecommended Fuel: 92 octaneIgn. Timing: 36 degrees total advanceMax RPM: 5800 HP32 350/351HP ..... 2599.99 ea

383/320HP TBI StrokerThis 383 ci TBI stroker engine produces 320 hp and 395 lbs of torque with an upgraded hydraulic roller cam. Includes oil pump, black painted oil pan and chrome timing cover and valve covers installed. Just add your own fuel and ignition components.Specifi cationsHP: 320Torque: 395Engine Type: Chevy small block V8Displacement: 383 ciBlock: 4 bolt mainCrankshaft: nodular steel 1 piece sealBore/Stroke: 4.030 x 3.750Rods: 4340 I-beam Pistons: hypereutecticRings: molyCamshaft Type: HYD rollerCamshaft Lift: .435 in x .462 exDuration @ .50: 198 in x 210 exCylinder Heads: OE cast iron TBIChamber Size: 67 ccValve Size: 1.94 in x 1.50 exIntake Runner Volume: OECompression Ratio: 9.5:1Rocker Arms: 1.5:1 stamped steelRecommended Fuel: 92 octaneIgn. Timing: 30 degrees total advanceMax RPM: 5800 HP05 383/320HP ..... 3499.99 ea

383/379HP Vortec StrokerThis 383 ci Vortec stroker performance engine produces 379 hp and 461 lbs of torque when used with a performance carburetor and manifold combination. Includes oil pump, black painted oil pan and chrome timing cover and valve covers installed. Just add your own fuel and ignition components.Specifi cationsHP: 379Torque: 461Engine Type: Chevy small block V8Displacement: 383 ciBlock: 4 bolt main/rollerCrankshaft: Scat nodular steel 1 piece sealBore/Stroke: 4.030 x 3.750Rods: Scat 4340 I-beam Pistons: hypereutecticRings: molyCamshaft Type: HYD rollerCamshaft Lift: .495 in x .500 exDuration @ .50: 220 in x 224 exCylinder Heads: OE cast iron VortecChamber Size: 64 ccValve Size: 1.94 in x 1.50 exIntake Runner Volume: OECompression Ratio: 9.5:1Rocker Arms: 1.5:1 stamped steelRecommended Fuel: 92 octaneIgn. Timing: 36 degrees total advanceMax RPM: 5800 HP33 383/379HP ..... 3799.99 ea

454/415HP Big BlockThe 454 ci performance engine produces 415 hp and 497 lbs of torque for your hot rod. Includes oil pump, black painted oil pan and chrome timing cover and valve covers installed. Just add your own fuel and ignition components.Specifi cationsHP: 415Torque: 497Engine Type: Chevy big block V8Displacement: 454 ciBlock: 2 bolt early styleCrankshaft: OE 2 piece sealBore/Stroke: 4.280 x 4.000Rods: OE Pistons: hypereutecticRings: molyCamshaft Type: HYD fl at tappetCamshaft Lift: .539 in x .539 exDuration @ .50: 230 in x 230 exCylinder Heads: OE castChamber Size: 118 ccValve Size: 2.079 in x 1.720 exIntake Runner Volume: OECompression Ratio: 9.4:1Rocker Arms: 1.7:1 stamped steelRecommended Fuel: 92 octaneIgn. Timing: 36 degrees total advanceMax RPM: 5800 HP40 454/415HP ..... 3290.99 ea

350/292HP TBIThe 350 ci TBI engine produces 292 hp and 373 lbs of torque in a late style hydraulic roller block. Includes oil pump, black painted oil pan and chrome timing cover and valve covers installed. Just add your own fuel and ignition components.Specifi cationsHP: 292Torque: 373Engine Type: Chevy small block V8Displacement: 350 ciBlock: 4 bolt mainCrankshaft: OE 1 piece sealBore/Stroke: up to 4.030 x 3.480Rods: powder metal Pistons: hypereutecticRings: molyCamshaft Type: HYD rollerCamshaft Lift: .435 in x .462 exDuration @ .50: 198 in x 210 exCylinder Heads: OE cast iron TBIChamber Size: 67 ccValve Size: 1.94 in x 1.50 exIntake Runner Volume: OECompression Ratio: 9.6:1Rocker Arms: 1.5:1 stamped steelRecommended Fuel: 92 octaneIgn. Timing: 36 degrees total advanceMax RPM: 5800 HP31 350/292HP ..... 2499.99 ea

350/375HP w/Alum. HeadsProduces 375 hp and 415 lbs of torque with the help of Pro-Filer aluminum heads and a hydraulic roller cam lifter combo. Includes oil pump, black painted oil pan and chrome timing cover and valve covers installed. Just add your own fuel and ignition components.Specifi cationsHP: 375Torque: 415Engine Type: Chevy small block V8Displacement: 350 ciBlock: 4 bolt main/rollerCrankshaft: OE 1 piece sealBore/Stroke: 4.040 x 3.480Rods: powder metal Pistons: hypereutecticRings: molyCamshaft Type: HYD rollerCamshaft Lift: .528 in x .536 exDuration @ .50: 220 in x 224 exCylinder Heads: Pro-Filer aluminumChamber Size: 64 ccValve Size: 2.02 in x 1.60 exIntake Runner Volume: 195 ccCompression Ratio: 10.0:1Rocker Arms: 1.6:1 steelRecommended Fuel: 91 octaneIgn. Timing: 36 degrees total advanceMax RPM: 5800 HP89 350/375HP ..... 3249.99 ea

ATK has been building engines for over 75 years and has assembled a line of dyno-proven crate engine packages to power up your car. Classic Industries’ dedication to bringing the highest quality products on the market, combined with ATK’s industry-leading warranty make these Chevy ATK crate engines an obvious choice. Available in various confi gurations including a complete, ready-to-run package for those who want to bolt their engine into their GM muscle car and hit the road. For the ultimate in Chevy crate engines, there's no better source than ATK from Classic Industries®.Important: Not for use in pollution controlled vehicles. Computer controlled vehicles may need updated chips or other modifi cationsNote: Special order, prepaid only. Not eligible for No Fault Gold Warranty Program. No further discounts apply.

Features a 24-Month/Unlimited-Mile Warranty!

Stage 1 Performance EnginesThree Stages of Performance!

From Tried-and-True . . .

. . . To Tire-Melting!

Stage 1:

Stage 2:

Stage 3:

The ATK Stage 1 package is the basic building block of performance. Each Stage 1 motor comes with oil pump, oil pan, timing cover, and valve covers installed. Choose your own intake, fuel system, and ignition components.

The ATK Stage 3 package is high performance in a crate, with oil pan and pump, spark plugs and wires, timing and valve covers, distributor, performance intake manifold, carburetor, fuel pump, water pump, fl axplate, and balancer all pre-installed.

The ATK Stage 2 package builds on the basics of the Stage 1, adding the distributor, a performance intake manifold, water pump, fl explate, and harmonic balancer. Add the carburetor and spark plugs and ignition wires of your choice.

ATK Engines

Hi Performance Crate Engines from ATK

KK

En

gin

es &

Co

mp

on

en

ts

413

350/408HP w/Alum. HeadsThis 350 ci engine produces 408 hp and 414 lbs of torque on pump gas with the help of an Edelbrock Performer intake manifold and aluminum heads. Includes an oil pan, valve covers, timing cover, distributor, intake manifold, water pump, fl explate, and balancer installed.Specifi cationsHP: 408Torque: 414Engine Type: Chevy small block V8Displacement: 350 ciBlock: 4 bolt main/rollerCrankshaft: Scat nodular steel 1 piece sealBore/Stroke: 4.030 x 3.480Rods: Scat 4340 I-beam Pistons: hypereutecticRings: molyCamshaft Type: HYD rollerCamshaft Lift: .528 in x .536 exDuration @ .50: 220 in x 224 exHeads: Edelbrock aluminumChamber Size: 70 ccValve Size: 2.02 in x 1.60 exIntake Runner Volume: 185 ccCompression Ratio: 10.0:1Rocker Arms: 1.6:1 roller tipRecommended Fuel: 92 octaneIgn. Timing: 36 degrees total advanceMax RPM: 5800 HP34M 350/408HP ..... 4799.99 ea

383/429HP Alum. Head StrokerThis 383 ci stroker engine produces 429 hp and 459 lbs of torque on pump gas with the help of an Edelbrock Performer manifold aluminum heads. Includes an oil pan, valve covers, timing cover, distributor, intake manifold, water pump, fl explate, and balancer installed.Specifi cationsHP: 429Torque: 459Engine Type: Chevy small block V8Displacement: 383 ciBlock: 4 bolt main/rollerCrankshaft: Scat nodular steel 1 piece sealBore/Stroke: 4.030 x 3.750Rods: Scat 4340 I-beam Pistons: KB forgedRings: molyCamshaft Type: HYD rollerCamshaft Lift: .528 in x .536 exDuration @ .50: 220 in x 224 exHeads: Edelrock RPM aluminumChamber Size: 70 ccValve Size: 2.02 in x 1.60 exIntake Runner Volume: 185 ccCompression Ratio: 10.0:1Rocker Arms: 1.6:1 roller tipRecommended Fuel: 92 octaneIgn. Timing: 36 degrees total advanceMax RPM: 5800 HP36M 383/429HP ..... 4799.99 ea

Stage 2 Performance Engines

Stage 3 Performance Engines

Stage 3454/500HP Big BlockThis 454 ci engine with performance aluminum heads produces 500 hp and 545 lbs of torque on pump gas. Includes an oil pan, valve covers, timing cover, distributor, performance intake manifold, water pump, fl explate, and balancer installed.Specifi cationsHP: 500Torque: 545Engine Type: Chevy big block V8Displacement: 454 ciBlock: 2 bolt early styleCrankshaft: OEBore/Stroke: 4.290 x 4.000Rods: OE Pistons: hypereutecticRings: molyCamshaft Type: HYD fl at tappetCamshaft Lift: .540 in x .540 exDuration @ .50: 228 in x 238 exCylinder Heads: oval port aluminumChamber Size: 110 ccValve Size: 2.19 in x 1.88 exIntake Runner Volume: 290 ccCompression Ratio: 10.0:1Rocker Arms: 1.7:1 full rollerRecommended Fuel: 92 octaneIgnition Timing: 36 degrees total advanceMax RPM: 5800 HP45M 454/500HP ..... 5599.99 ea

383/480HP StrokerThis 383 ci street/strip stroker engine with 480+ hp and 470+ lbs of torque in a ready-to-run pump gas package. Includes oil pan, timing cover, valve covers, distributor with spark plugs and wires, a performance intake manifold, performance carburetor, fuel pump, water pump, fl explate, and balancer all pre-installed.Specifi cationsHP: 480+Torque: 470+Engine Type: Chevy small block V8Displacement: 383 ciBlock: 4 bolt main/rollerCrankshaft: Scat 4340 forgedBore/Stroke: 4.040 x 3.750Rods: Scat 4340 H-beam Pistons: forgedRings: molyCamshaft Type: HYD rollerCamshaft Lift: customDuration @ .50: customCylinder Heads: Pro-Filer aluminumChamber Size: 64 ccValve Size: 2.02 in x 1.60 exIntake Runner Volume: 195 ccCompression Ratio: 10.1:1Rocker Arms: 1.6:1 full rollerInduction: carburetedRecommended Fuel: 92 octaneIgnition Timing: 36 degrees total advanceMax RPM: 5800 HP55C 383/480HP ..... 7199.99 ea

489/565HP StrokerThis 489 ci stroker big block offers 565 hp and 595 lbs of torque in ready-to-run package. Includes oil pan, timing cover, valve covers, distributor with spark plugs and wires, a performance intake manifold, performance carburetor, fuel pump, water pump, fl explate, and balancer all pre-installed.Specifi cationsHP: 565Torque: 595Engine Type: Chevy big block V8Displacement: 489 ciBlock: 4 bolt early styleCrankshaft: Scat nodular steelBore/Stroke: 4.280 x 4.250Rods: Scat 4340 I-beam Pistons: forgedRings: molyCamshaft Type: HYD rollerCamshaft Lift: customDuration @ .50: customHeads: Edelbrock aluminum oval portChamber Size: 110 ccValve Size: 2.19 in x 1.88 exIntake Runner Volume: 290 ccCompression Ratio: 10.1:1Rocker Arms: 1.7:1 roller tipInduction: carburetedRecommended Fuel: 92 octaneIgnition Timing: 36 degrees total advanceMax RPM: 5800 HP41C 489/565HP ..... 7899.99 ea

Supercharged 350/500HPThis 350ci supercharged engine produces 500+ hp and 494 lbs of torque in a ready-to-run package. Includes oil pan, timing cover, valve covers, distributor with spark plugs and wires, a performance intake manifold, performance carburetor, fuel pump, water pump, fl ex plate, and balancer all pre-installed.Specifi cationsHP: 500+Torque: 494Engine Type: Chevy small block V8Displacement: 350 ciBlock: 4 bolt main/rollerCrankshaft: 4340 forged steelBore/Stroke: 4.030 x 3.480Rods: H-beam Pistons: forgedRings: molyCamshaft Type: HYD rollerCamshaft Lift: .535 in x .560 exDuration @ .50: 231 in x 239 exCylinder Heads: aluminumChamber Size: 70 ccValve Size: 2.02 in x 1.60 exIntake Runner Volume: 170 ccCompression Ratio: 8.5:1Rocker Arms: 1.6:1 full rollerInduction: Weiand 177 supercharger/carbRecommended Fuel: 92 octaneIgnition Timing: 36 degrees total advanceMax RPM: 5800 HP38C 350/500HP ..... 9099.99 ea

ATK Engines

Hi Performance Crate Engines from ATK

496/600HP StrokerThis 496 ci street/strip stroker engine produces 600 hp and 605 lbs of torque. Includes oil pan, timing cover, valve covers, distributor with spark plugs and wires, a performance intake manifold, performance carburetor, fuel pump, water pump, fl explate, and balancer all pre-installed.Specifi cationsHP: 600Torque: 605Engine Type: Chevy big block V8Displacement: 496 ciBlock: 4 bolt early styleCrankshaft: 4340 forged steelBore/Stroke: 4.310 x 4.250Rods: 4340 H-beam Pistons: forgedRings: molyCamshaft Type: HYD rollerCamshaft Lift: customDuration @ .50: customHeads: aluminum "R" portChamber Size: 118 ccValve Size: 2.19 in x 1.88 exIntake Runner Volume: 315 ccCompression Ratio: 10.1:1Rocker Arms: 1.7:1 roller tipInduction: carburetedRecommended Fuel: 92 octaneIgnition Timing: 36 degrees total advanceMax RPM: 5800 HP63C 496/600HP ..... 9599.99 ea

540/600HP Dart Big BlockThis ATK monster Stage Three 540 ci Dart Big "M" engine produces over 600 hp and 600 lbs of torque in a dyno-tested and tuned package. All Stage Three motors are dyno proven, built from top quality parts and come with oil pan, timing cover, valve covers, distributor with spark plugs and wires, a performance intake manifold, performance carburetor, fuel pump, water pump, fl explate, and balancer all-pre installed.Specifi cationsHP: 600+Torque: 600+Engine Type: Dart Big "M" Block V8Displacement: 540 ciBlock: Dart 9.8" deck heightCrankshaft: Scat 4340 forged steelBore/Stroke: 4.500 x 4.250Rods: Scat H-beam Pistons: forgedRings: molyCamshaft Type: HYD rollerCamshaft Lift: customDuration @ .50: customHeads: Dart Pro Series 1Chamber Size: 119 ccValve Size: 2.25 in x 1.88 exIntake Runner Volume: 325 ccCompression Ratio: 10.1:1Rocker Arms: 1.7:1 full rollerInduction: carburetedRecommended Fuel: 92 octaneIgnition Timing: 36 degrees total advanceMax RPM: 5800 HP42C 540/600HP ... 11,599.99 ea

Each Engine Features a 24-Month/Unlimited-Mile Warranty!

En

gin

es &

Co

mp

on

en

ts

414

KK


OBD II / ABS AutoScanner w/Code ConnectThis OBD II scanner not only displays the diagnostic trouble codes, but also offers the most probable solutions for your specifi c vehicle when troubleshooting details are available thanks to the CodeConnect database of 3 million verifi ed fi xes. Read and erase DTCs (Diagnostic Trouble Codes), display and reset MIL (Malfunction Indicator Lamp) status, read, record & playback live sensor data, read and display I/M (Inspection/Maintenance) monitors. Other features include an OBD II emissions check and drive cycle mode, ABS code read/erase capability for most 1996 and newer GM, Ford, and Chrysler vehicles, a large, backlit LCD, a USB port for updates, and the capability of printing data via PC. Compatible with OBD II and CAN vehicles 1996 and newer.Note: Troubleshooting data in English only. No further discounts apply. AC9580 ............................................... 209.99 ea

Elite Autoscanner ProThis battery powered OBD I and OBD II enhanced scan tool features a large, backlit LCD and offers hobbyists and technicians the ability to read and erase generic and manufacturer-specifi c DTCs (Diagnostic Trouble Codes), display and reset MIL (Malfunction Indicator Lamp) status, record & playback live sensor data, read and display I/M (Inspection/Maintenance) monitors and more! Read domestic enhanced codes, graph engine data, record stored vehicle information, and connect to a PC to print data and download updates. CAN compliant and compatible with ALL 1996 and newer OBD II compliant vehicles as well as certain pre-1996 GM, Ford and Chrysler vehicles.Note: No further discounts apply.

AC9190 .............................................. 334.99 ea

Performance Products

Performance Products

1999-02 LS1 Performance ProgrammerThe JET Performance Programmer lets you take control and program your own vehicle computer just the way you like it. Modify air and fuel ratios, ignition timing, shift points, shift fi rmness, speed limiter, and rev limiter settings. Exclusive JET Tri-Power tuning technology lets you tune for economy using lower cost regular fuel, or tune for performance using midgrade or premium fuels. All three modes are designed to operate the engine at peak effi ciency to maximize horsepower and mileage for the given octane level. The programmer will also correct your speedometer and turn off the ABS system trouble light if you change tire size or gear ratios, modify the temperature that the cooling fan turns on and bypasses the skip shift mechanism on manual transmissions. A built in scan tool reads and clears diagnostic codes when your check engine light comes on, saving you a trip to the dealer. The programmer simply plugs into the vehicle’s diagnostic port under the dash and allows you to make your changes by answering simple yes or no questions. Take the next step in performance tuning with the JET Performance Programmer!JT15029 1999-02 AT or MT ............ 339.99 ea

Stage 1Is for stock or mildly modifi ed vehicles. Fuel and timing curves are modifi ed for optimal performance and mileage using less expensive, lower octane fuels. Programming is designed to burn fuel at peak effi ciency, which results in improved performance and mileage. Daily drivers can use lower cost regular fuel for potential mileage gains, but for optimal performance gains use of mid-grade or better is recommended.5.7L - LT1JT19314 1993 AT ..................... 154.99 ea JT19315 1993 MT .................... 154.99 ea JT19414 1994 AT ..................... 244.99 ea JT19415 1994 MT .................... 244.99 ea JT19514 1995 AT ..................... 244.99 ea JT19515 1995 MT .................... 244.99 ea JT19614 1996 AT ..................... 244.99 ea JT19615 1996 MT .................... 244.99 ea JT19714 1997 AT ..................... 244.99 ea JT19715 1997 MT .................... 244.99 ea 5.7L - LS1JT19814 1998 AT ..................... 244.99 ea JT19815 1998 MT .................... 244.99 ea JT19914 1999 AT ..................... 244.99 ea JT19915 1999 MT .................... 244.99 ea JT10014 2000 AT ..................... 244.99 ea JT10015 2000-02 MT .................... 244.99 ea JT10114 2001-02 AT ..................... 244.99 ea

Stage 2Is designed for the performance enthusiast, the Stage 2 features more aggressive programming to make the most horsepower and torque available. Fuel and timing curves are extensively modifi ed for peak performance and drivability. Requires use of 91 octane fuel, 180 degree thermostat and free fl ow exhaust. Also works well with aftermarket intake systems, mass air sensors, TBI spacers, etc. 5.7L - LT1JT19314S 1993 AT ..................... 159.99 ea JT19315S 1993 MT .................... 159.99 ea JT19414S 1994 AT ..................... 249.99 ea JT19415S 1994 MT .................... 249.99 ea JT19514S 1995 AT ..................... 249.99 ea JT19515S 1995 MT .................... 249.99 ea JT19614S 1996 AT ..................... 249.99 ea JT19615S 1996 MT .................... 249.99 ea JT19714S 1997 AT ..................... 249.99 ea JT19715S 1997 MT .................... 249.99 ea 5.7L - LS1JT19814S 1998 AT ..................... 249.99 ea JT19815S 1998 MT .................... 249.99 ea JT19914S 1999 AT ..................... 249.99 ea JT19915S 1999 MT .................... 249.99 ea JT10014S 2000 AT ..................... 249.99 ea JT10015S 2000-02 MT .................... 249.99 ea JT10114S 2001-02 AT ..................... 249.99 ea

1993-02 JET Performance ModulesJET Performance modules offer the most horsepower available for your car when using a donor engine and computer system from a crate engine! Add up to 23 horsepower instantly with simple, plug-in installation! Only JET Performance programming provides exclusive, full range dynamic spectrum tuning of the air/fuel ratio, ignition advance, transmission and various other parameters. Each program is track and dyno tested to ensure the most possible horsepower and drivability from each application. 50 state smog legal!

1981-93 Hypertech Power ChipsHypertech power chips increase performance and, in most cases, increase fuel effi ciency in stock, unmodifi ed vehicles. Simply replace the stock chip with the Hypertech Power Chip. Street Runner chips are designed to maximize street performance.Thermo Power chips are designed for high heat environments and hard competition driving.Important: All Hypertech power chips require premium unleaded fuel of 91 octane or higher. Not legal for emissions controlled vehicles. Check local laws and regulations before ordering.Note: Thermo Master chips require a low temperature thermostat (160o or 180o recommended) . Special order only. 8th digit of VIN required when ordering. No further discounts apply.

Street Runner AT/MT PC212 1981-92 except TPI and LT1 .. 119.99 ea PC213 1985-92 TPI and LT1 ............. 189.99 ea

Thermo Master AT/MT PC214 1981-92 except TPI and LT1 .. 129.99 ea PC215 1985-93 TPI and LT1 ............. 199.99 ea

OBD II PocketScan PlusPocketScan® Plus is the most advanced compact code reader available! Besides automatically reading DTCs (Diagnostic Trouble Codes), this scan tool provides freeze frame data, VIN info and performs I/M-readiness (Inspection Maintenance) testing. Displays over 4,000 OBDII generic code defi nitions and is compatible with all 1996 and newer vehicles (OBD II & CAN).Note: No further discounts apply AC9550 ............................................... 79.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

415Engine Mounts & Brackets

Motor Mount Bolt SetsSecure any engine with complete confi dence with ARP’s rugged motor mount bolts. You can choose between black oxide fi nished 8740 chrome moly or corrosion-resistant stainless steel; choice of hex or 12-point head. Sets come complete with fl at washers.

Chevrolet EngineMount to BlockAR13312 black oxide hex head ......... 12.99 set AR13311 black oxide 12-point ......... 12.99 set AR43312 stainless hex head ......... 17.99 set AR43311 stainless 12-point ......... 17.99 set Mount to FrameAR13315 black oxide hex head ......... 9.99 set AR43315 stainless hex head ......... 17.99 set

Pontiac EngineMount to BlockAR19312 black oxide hex head ......... 14.99 set AR19311 black oxide 12-point ......... 14.99 set AR49312 stainless hex head ......... 24.99 set AR49311 stainless 12-point ......... 24.99 set

1970-73 455 Motor Mount BoltsReplacement engine motor mount to frame bracket bolts for 1970-73 Firebird and T/A models with 455ci engine. This long, specialized hex-head bolt features a round head marking for an authentic appearance.1253530 1970-73 2 piece ..................... 14.99 pr

to frame

to engine

1970-81 Engine Conversion BracketsThese mounting brackets will allow a correct reinstallation of the Olds 350 or 403 engine into a 1977-79 Pontiac F-body. This set will also retrofi t 1970-76 or 1980-81 Pontiac F-body models. This 4 piece engine conversion bracket set requires 2 motor mounts sold separately under item # T83168.Note: This set does not include mounting hardware.C269503 1970-81 Olds 350-403 ......... 144.99 ea

1970-81 Engine Conversion BracketsThis set facilitates the use of a 1964-69 Pontiac engine in a 1970-81 Pontiac F-body chassis. Due to a 2-bolt mounting confi guration on 1964-69 Pontiac engine blocks, adapter brackets becomes necessary for proper engine positioning. Using this set will also allow Trans Am owners to use Shaker Hood systems. This 4 piece engine conversion bracket set requires 2 motor mounts sold separately under item# T83168.Note: This set does not include mounting hardware.C269513 1970-81 ................................ 144.99 set

1967-69 Engine Conversion BracketsThis set facilitates the use of a 1970-81 Pontiac engine in a 1967-69 Pontiac F-body chassis. Due to a 3-bolt mounting confi guration on 1970-81 Pontiac engine blocks, adapter brackets becomes necessary for proper engine positioning. This 2 piece engine conversion bracket set converts 3-hole motor mount pad on block to a 2-hole mount.C269514 1967-69 1970-81 Pontiac ...... 54.99 set

to frame

to engine

1977-79 Motor Mount to Frame Bracket BoltsReproduction motor mount bolts for 1977-79 Firebird Trans Am models with Oldsmobile 403 engine. These bolts hold the engine motor mount to the A-Frame bracket and features correct tapered end.TA4001 1977-79 4 piece set ................ 13.99 set

1977-79 Trans Am Motor Mount to Block BoltsReproduction motor mount bolts for 1977-79 Firebird Trans Am models with Oldsmobile 403 engine. These bolts hold engine motor mount to engine block and feature correct 3-A head marking as original. 8-piece bolt set.TA4002 1977-79 8 piece set ................ 16.99 set

1977-79 Motor-to-Frame Mounting Bolt SetReproduction motor mount to frame mounting bolt set for 1977-79 Trans Am models with Oldsmobile 403 engine. This 24-piece set includes factory correct bolts, washers and nuts with TR head marking.TA4003 1977-79 24 piece set .............. 24.99 set

Engine Mounts

1978-81 Motor Mount BracketsCorrect original replacement bracket for 1978-81 Firebird models with small block engines. LH and RH brackets are interchangeable.Note: *Export and Canada only.332648 1978-79 305, 350-L ............... 21.99 ea 332648 1980-81 305-H ....................... 21.99 ea 332648* 1981 267 ........................... 21.99 ea

1967-69 Firebird V8 Engine Frame MountsCorrect replacement engine frame mount brackets for all 1967-69 V8 equipped Firebird models. These frame mount brackets are stamped in steel and are ready to install. Sold in sets.K576 1967-69 LH & RH ................. 74.99 set

1973-97 Poly Clam Shell Motor Mount InsertsMade of superior Hyper-Flex performance polyurethane material. This material is impervious to vehicle chemicals, road salt and oils. The redesigned GM “clam shell” style insert confi guration allows you to insert these performance mounts into your existing metal shells. Note: Specify color when ordering. Add suffi x G = black, R = red.31116 1973-92 zinc fi nish ................. 24.99 ea 31127 1993-97 zinc fi nish LH ........... 29.99 ea 31116 1993-97 zinc fi nish RH .......... 24.99 ea

1975-92 Motor Mount BoltOriginal GM motor mount to frame mount bolts. Installs directly in the center of the motor mount bracket and attaches to the frame mount. G7279 1975-92 7/16"-14 x 5-1/8" ..... 2.99 ea

1967-02 Motor MountsIf your vehicle has 50,000 miles or more, the motor mounts have been damaged or soaked with oil over a period of time, chances are they have grown weak and are in need of replacement. Damaged or broken mounts can cause a dangerous condition. These reproduction motor mounts are an inexpensive cure.

6 Cylinder Motor MountsLeft or Right Hand InterchangeableT82284 1968-72 250 4.1,1 mount bolt 14.99 ea T83099 1973-76 250 4.1 .................... 7.99 ea TT83208 1982-89 173 2.8 .................... 19.99 ea T83208 1990-92 189 3.1 .................... 19.99 ea T83208 1993-95 207 3.4 .................... 19.99 ea Left Hand Side83066 1976 231 3.8 ..................... 15.99 ea T82383 1977-81 231 3.8 .................... 19.99 ea T83208 1995-02 231 3.8 .................... 19.99 ea Right Hand SideT83174 1976-81 231 3.8 .................... 15.99 ea T82627 1989 231 3.8, 20th ann ..... 19.99 ea T82878 1995-02 231 3.8 .................... 20.99 ea

8 Cylinder Motor MountsLeft or Right Hand InterchangeableT82254 1967-69 400 6.6 .................... 12.99 ea T83168 1975-76 455 7.5 .................... 19.99 ea T83168 1975-77 350 5.7, VIN P & M 19.99 ea T83168 1975-79 400 6.6 .................... 19.99 ea T83032 1977 350-R 5.7 ................. 15.99 ea T83168 1977-79 403 6.6 .................... 19.99 ea T83168 1977-81 301 4.9 .................... 19.99 ea T83099 1977-92 305 5.0 .................... 7.99 ea T83168 1978-79 350 5.7 .................... 19.99 ea T83099 1980-81 265 4.3 .................... 7.99 ea T83099 1981 267 4.4 .................... 7.99 ea T83099 1987-92 350 5.7 .................... 7.99 ea Left Hand SideT82256 1967 326 5.3 ..................... 9.99 ea T83120 1969-74 350 5.7 ..................... 19.99 ea T83120 1970-74 400 6.6 ..................... 19.99 ea T83120 1971-74 455 7.5 ..................... 19.99 ea Right Hand SideT82255 1967 326 5.3 ..................... 9.99 ea T83121 1969-74 350 5.7 .................... 19.99 ea T83121 1970-74 400 6.6 .................... 19.99 ea T83121 1971-74 455 7.5 .................... 19.99 ea

332648

T82254 T83121

En

gin

es &

Co

mp

on

en

ts

416

KK


Pontiac Engine Lift Bracket SetThese engine lift brackets are designed to bolt to the ends of each cylinder head to remove the engine from the vehicle. Brackets are made from .020" thick steel and have an .88" x 1.00" hook slot. Each is painted with epoxy coating and use either 3/8" or 7/16" mounting bolts. Grade 5 or higher bolts recommended. G9429 ............................ 15.99 set

Engine Tools

Specialty Engine Tools

Camshaft Installation HandleInstalling a camshaft just got easier by using the right tool. Perfect tool for all Chevrolet V6 and V8 engines.66897 V6 & V8 ............. 24.99 ea

Valve Spring CompressorFaster than conventional compressors because there is no need to readjust the tool after each spring.Note: When space prohibits use of cam handle, replace the handle with a bolt and turn the socket.Y16750 compressor ........ 41.99 ea Y16910 bolt .................... 1.99 ea

Valve Lash Wrench SetsChoose from a variety of different wrench sets for valve lash adjustments. w/1/8" Allen66779 7/16" wrench......... 21.99 set w/3/16" & 1/8" Allen66778 1/2" wrench........... 21.99 set w/3/16" & 7/32" Allen66780 9/16" wrench......... 24.99 set 66781 5/8" wrench........... 21.99 set

66778

Cam Bearing Installation Tool66794 small block ......... 74.99 set

Engine Rotation AdapterCrankshaft rotation adapter for Chevrolet V8 engines allows the use of a 1/2" drive breaker bar or a 1" socket and breaker bar to rotate the crankshaft when turning the engine with the balancer already installed. 66782 ............................ 19.99 ea

66789

66787

Top Dead Center Locator66792 14mm threads ..... 7.99 ea

Oil Pump Primer66896 with bushing ....... 21.99 ea

Degree WheelsNote: *With degree wheel attachment66787 degree wheel kit .. 109.99 set 66791 9" degree wheel .. 14.99 ea Crankshaft Turning Sockets67491* small block ......... 24.99 ea

66787

HD Piston Ring CompressorInstall pistons 2-1/8" to 5" (54 mm to 127 mm) in diameter. Positive lock action provides positive compression and fi ngertip release. Slip tool over piston and tighten with L shaped wrench to compress piston ring into piston grooves. Insert piston into cylinder and tap with hammer to install. Enlarged crimped edge prevents compressor from entering cylinder.X2284 ............................ 10.99 ea

Push Rod ToolUse this tool to check the length of push rods on small block Chevrolet engines. 66789 w/3/8" studs ........ 9.99 ea 66790 w/7/16" studs ...... 9.99 ea

Chevrolet Engine Lift BracketsLift brackets were installed on the intake manifold for quick assembly ease on the production line. Installing these engine lift brackets will help make removing and installing the engine easier by providing strong lift points. Available for small block (SB) Chevrolet V8 engines. One pair required per engine.HC70 universal SB .... 26.99 pr 1256601 1976-79 SB .... 29.99 pr

HC70

Beam Type Torque WrenchesDirectly measure a variety of torque values in English and metric when tightening fasteners with this non-ratcheting torque wrench. Pointer moves clockwise or counterclockwise. Easily calibrated by bending pointer to zero before use.X2955 1/4" fi xed, inch/lbs 54.99 ea X2956 3/8" fi xed, inch/lbs 71.99 ea X2957 1/2" fi xed, foot/lbs 65.99 ea

Flywheel TurnerThis tool hooks into the fl ywheel teeth to rotate the crankshaft. Use when working on clutches., transmissions, installing rings, or other jobs which require the crankshaft to be in a specifi c position. Spring tension aids tool engagement on the fl ywheel.X2270 ............................ 30.99 ea

Crankshaft Turning SocketTwo separate sockets for turning the crankshaft. For use with small block Chevrolet and Pontiac applications as listed below.66901 small block ......... 15.99 ea 66900 Pontiac V8 .......... 17.99 ea

66900

X2957

Engine AssemblyGreaseUnique formula dissolves in oil. Can be applied to ring lands in order to prevent micro welding during initial break-in. Combine with the Joe Gibbs BR break-in oil (P/N's BR106 or BR107) for proven protection during break-in. AG728 1 pound can ........ 21.99 ea AG732 1 oz tube ............. 2.99 ea

The Engine TilterWorks with standard engine hoists to provide an additional axis to maneuver- adjust the angle of the engine with a turn of the handle! The Engine Tilter is rated for 1200 pounds, made from steel, weighs only 14 pounds, and comes fully assembled. Includes an upper lap link and four 20" chains. Made in USA. MN2087 ....................... 149.99 ea

1964-79 Engine Lift HookThis original style lift hook is designed for 1964-79 Pontiac V8 engines. The hook mounts to the front of the timing chain cover on the right hand upper bolt. Manufactured from heavy gauge silver zinc plated steel. A8700177 1964-79 ........ 7.99 ea

Oil Pressure Switch SocketThis socket designed with extra recess to accommodate most oil pressure switches and many brake lamp switches. This 3/8" drive socket features a 1-1/16" hex opening and a durable black oxide coating. X3923 ............................ 5.99 ea

Rocker Stud ToolDesigned for not only removing rocker studs, but aligning as well.66783 ............................ 15.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

417Engine Tools

Specialty Engine Tools

Mechanic’s StethoscopeLocates the source of engine noise quickly. Listen for trouble by tracing the sound of fl owing water, oil, gas or steam. Identify piston slap, worn gears, faulty valves, water pump failure and more! The handle is completely shock resistant. Disassembles for storage.Note: Keep this tool away from moving, rotating and electrical components.X835 ............................ 18.99 ea

Royal PurpleMax Tuff Assembly LubeSynthetic lubricant designed for use in reassembling repaired equipment.It utilizes durable synthetic molecules that adhere to metal surfaces and create an extremely strong barrier minimizing the possibility of metal-to-metal contact while providing excellent protection against rust and corrosion to both ferrous and nonferrous metals. Formulated with Royal Purple’s proprietary Synslide additive technology.RP01335 8 oz. bottle ....... 19.99 ea RP12335 case of 12 ........ 215.99 cs

Actron Advance Timing LightThis Advance Timing Light features an all metal inductive pickup, bright Xenon fl ash, and one-touch control. Available with a degree dialed knob for easy timing adjustments or a digitally-controlled LED display and tachometer functions. Note: No further discounts apply. AC7528 adjustable knob . 69.99 ea AC7529 LED display ...... 94.99 ea

Compression TestersCompression tester detects worn rings, burnt valves and blown head gaskets. Features external pressure release valve, full 2-1/2" easy-to-read face. U.S. and metric scales. 14" high pressure fl exible oil and grease resistant hose. 14mm and 18mm ends fi t most spark plug openings. Professional kit features a detachable hose and includes adapters for all standard spark plug threads, a repair kit with valves and rubber O-rings.Note: No further discounts apply AC7826 tester only ........ 24.99 ea AC7828 professional kit 39.99 ea

Actron AutoTroubleshooterThis ingenious tool features automatic reverse polarity indication, automatic zero adjustment for volts and amps for accurate measurements and overload protection on all ranges. Performs all standard electrical tests for on-car and bench troubleshooting. Locate faulty wiring, test electrical components, engine sensors, ignition and fuel systems and your starting/charging system.Note: No further discounts apply AC7677 ......................... 49.99 ea

AutoAnalyzer Digital MultimeterPerforms standard electrical tests on the car and workbench to locate faulty wiring, test electrical components, engine sensors, ignition and fuel systems and starting/charging system voltage. Features 19 ranges and automatic zero adjustment for volts, amps, and battery tests, as well as an easy to read backlit LCD. Includes color coded detachable test leads, alligator clips, and a comprehensive user manual.Note: No further discounts apply. AC7665 ......................... 31.99 ea

Thermometer w/Laser PointerAim this IR thermometer at the target, press a button, and read the temperature display. Verify the temperature in your AC system or fi nd an overcharge in your electrical systems. System-On-Chip technology creates a compact, lightweight design with a measurement range of -58ºF to +932ºF (-50ºC to +500ºC). Includes two AAA batteries and belt holster.Note: No further discounts apply AC7876 ......................... 59.99 ea

Thread DetectiveThis precise, easy-to-use thread identifi cation tool is well suited for distinguishing between similar inch and metric threads on both nuts and bolts. Available in a heavy duty plastic box or attached to a wire lanyard. Comes with both metric and inch nut and bolt sizes. TD700101 in plastic box .. 49.99 set TD700102 wire lanyard .... 34.99 set

Inch Thread Identifi ers6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20.

Metric Thread Identifi ersM4x0.7, M5x0.8, M6x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.50, M12x1.25, M12x1.5, M12x1.75.

TD700101

TD700102

AC7528

AC7528 AC7529

Remote Starter SwitchStart and crank engine from under the hood or from either side of the vehicle. Ideal for compression test or bumping engine onto TDC (top dead center) timing marks for valve, distributor or camshaft adjustment. Heavy-duty push button trigger switch, 5-foot heavy-duty leads, 12 gauge conductors. 20-Amp, high current clips open to an extra wide 5/8” for easy hook-up. Made in USA.Note: No further discounts apply AC7854 ......................... 34.99 ea

Remote Starter SwitchAllows one person to start or crank the engine from under the hood. Ideal for compression test or bumping engine onto TDC (top dead center) timing marks for valve, distributor or camshaft adjustment. Power tool type trigger switch for regular use with medium currents. Heavy duty Neoprene leads. 10-Amp, medium current clips open to 1/2". Protective rubber boots prevent electrical shorts. Ergonomic handle. One year warranty. Made in USA.Note: No further discounts apply AC7853 ......................... 9.99 ea

AC Delco 6V Inspection CameraThanks to advanced digital imaging technology, you can now see areas that were out of view and unreachable with inspection mirrors. Features a 3" high-resolution color LCD display and small 8mm (0.32") camera head. The camera features a two-setting 180˚ view fl ip, 12-setting adjustable zoom (up to 250%), and 5-setting LED brightness control, and a video-out port for viewing on full size monitors. The waterproof camera head and fl ex-cable allows you to explore virtually any environment.Important: Requires 4 AA batteries (not included).AC100101 ....................... 147.99 ea

AC7828

En

gin

es &

Co

mp

on

en

ts

418

KK

Toll Free Order Line 800.854.1280LS Conversion

LS9 6.2L Accessory Drive SystemFront engine accessory drive system for the 6.2L LS9 engine. The drive system assembly comes with alternator power steering pump, power steering reservoir and ac compressor along with all brackets, bolts, tensioners, pulleys, belts. Includes instructions. Important: This kit includes an alternator bracket which is pre-installed and bolted behind the water pump on crate engines. Note: Special order, prepaid only. No further discounts apply.

G25017 LS9 accessory drive set .................................................. 1894.99 set

LSA 6.2L Accessory Drive SystemFront engine accessory drive system for the 6.2L CTS-V LSA engine without AC. The drive system assembly comes with alternator, power steering pump, brackets, bolts, tensioners, pulleys, and belts. Includes instructions. AC add-on kit sold separately and includes mounting bracket, belt, AC compressor, hardware and instructions.Note: Special order, prepaid only. No further discounts apply. G25012 LSA accessory drive set .................................................... 949.99 set G25013 LSA AC add on kit............................................................ 299.99 set

LSA & LS9 Intercooler Fluid PumpThis factory-engineered mechanical pump circulates coolant between the intercooler on top of the supercharger and heat exchanger for 6.2L LSA and 7.0L LS9 engines. It can also be installed with any forced induction system that uses a liquid to air intercooler.Note: Special order, prepaid only. No further discounts apply. G25015 LSA/LS9 ........................................................................... 264.99 ea

LSA Supercharger KitAdd horsepower to any LS engine with rectangular port L92-style heads! This is the same 1.9L supercharger found on the 6.2L LSA engine with a slightly different intercooler cover. A pair of Eaton four lobe high helix rotors makes this unit extremely effi cient at low rpm but sustains the output into high rpm. On a 6.2L engine it produces about 9 lbs of boost but boost pressure may vary with engine displacement and compression ratio. This kit includes intake, fuel injectors, cast cover, intercooler, front pulley, throttle body, and gasket set. Installation requires proper tuning of the vehicle computer system along and a high pressure, high volume fuel pump. Intercooler requires a liquid cooling system consisting of a heat exchanger, a coolant tank and a coolant pump. The ZL1 fuel pump module delivers 66 gph at 65 psi, a signifi cantly greater volume than a standard pump. This module is perfect for custom tanks and motors up to 600 hp.Important: This product may not be legal for highway use in all 50 states. Note: Special order, prepaid only. Shipped double oversized.No further discounts apply. G25018 LSA supercharger kit ..................................................... 7347.99 set G25016 ZL1 fuel pump module .................................................. 294.99 ea

HP 638

TQ 604

Bore/Stroke 4.065" x 3.622"

Cam Type hydraulic roller

Cam Lift .562" x .558"

Duration @ .050 211º int./230º exh.

Valve Size 2.16" int./1.59" exh.

Compression Ratio 9.1:1

Rocker Ratio 1.7:1

Recommended Fuel 92 octane

Balancing internal

Max RPM 6600

HP 556

TQ 551

Bore/Stroke 4.065" x 3.622"

Cam Type hydraulic roller

Cam Lift .492"int./.480" exh.

Duration @ .050 198º int./216º exh.

Valve Size 2.16" int./1.59" exh.

Compression Ratio 9.1:1

Rocker Ratio 1.7:1

Recommended Fuel 92 octane

Balancing internal

Max RPM 6600

LS9 6.2L/638HPThe Corvette ZR1 LS9 6.2L engine in a fully-dressed crate engine package! The LS9's lightweight reciprocating mass, sixth generation supercharger and high fl ow cylinder heads combine to provide 638 horsepower at 6500 rpm with a neck-breaking 604 ft-lbs of torque. Includes a 14" manual transmission fl ywheel and an intercooler pump. Requires an external oil tank for the dry sump oiling system. Requires a water tank for the charge cooler. Requires a heat exchanger for the charge cooling system. Does not include ECU or wire harness. Accessory drive system not included. Crankshaft has a unique 9 bolt fl ywheel mounting pattern. May require an adapter for use with some transmissions. This engine is intended for installation in pre 1976 non pollution controlled vehicles or for off road use.Note: Special order, prepaid only. Shipped truck freight. No further discounts apply. G25010 LS9/6.2L ..................................................................... 24,784.99 ea

Supercharged!

LSA 6.2L/556HPThe supercharged 6.2L LSA engine from the Cadillac CTS-V and Camaro ZL-1 in a fully dressed crate engine package! This cousin of the Corvette LS9 produces 556 horsepower at 6100 rpm with 551 lbs of torque at 3800 rpm. It's a rare engine that offers smooth and well-balanced performance. Includes a 14" dual mass manual transmission fl ywheel and an intercooler pump. Does not include ECU, wire harness, or accessory drive system. Requires a water tank for the charge cooler and a heat exchanger for the charge cooling system. May require an adapter for use with some transmissions. This engine is intended for installation in pre 1976 non pollution controlled vehicles or for off road use. Note: Special order, prepaid only. Shipped truck freight. No further discounts apply. G25011 LSA/6.2L .................................................................... 15,005.99 ea

Supercharged!

G25012

LS Conversion Components

LSA & LS9 Engine Controller SetsThe LSA and LS9 V8s are some of the most advanced crate motors available, and if you're installing one of these supercharged 6.2 liter beasts, you'll need the electronics to keep these formidable engines under control. These sets come with the hardware needed to wire and run LSA and LS9 crate engines. Each set comes with an engine-specifi c ECM, wiring harness and fuse box, as well as MAF sensor with mounting boss, a pair of oxygen sensors with weld-in sensor bungs, an electronic accelerator assembly, and instructions.Important: This engine controller is a stand-alone retrofi t system for pre-1976 vehicles. Not for use with pollution controlled vehicles. Note: Special order, prepaid only. No further discounts apply. G25014 LSA ................................................................................ 1529.99 set G19299 LS9.................................................................................. 1630.99 set

G25014

OS2

G25018G25016

KK

En

gin

es &

Co

mp

on

en

ts

419


1967-69 Firebird LS Conversion SetsThis unique conversion system takes th e guesswork out of installing an LS engine into a 1967-69 Firebird. These sets are designed to use the LH8 oil pan, positioning the engine and transmission with room for most accessory drives, heater boxes, power steering and brakes, and exhaust systems. The motor mounts and transmission crossmember bolt directly to the factory mounting locations. Sets are available for T56, 4L60E, and 4L80E transmissions with your choice of red or black urethane transmission and motor mounts. Each set includes a transmission crossmember, engine and frame mounts, detailed instructions and mounting hardware. Exhaust headers designed for these sets are available separately. All mounts are protected by a manufacturers lifetime replacement warranty. Made in USA.Important: Transmission tunnel modifi cation may be required for T56 applications. Notching the frame is required when using 1998-02 F-Body accessory drive with low mount AC compressor. Some modifi cation may be required.Note: No further discounts apply.Conversion With T-56 Transmission Mount 1060256 1967-69 conversion w/black mounts ........................... 499.99 set 1061856 1967-69 conversion w/red mounts ............................... 499.99 set Conversion With 4L60E Transmission Mount 1060260 1967-69 conversion w/black mounts ........................... 499.99 set 1061860 1967-69 conversion w/red mounts ............................... 499.99 set Conversion With 4L80E Transmission Mount 1060280 1967-69 conversion w/black mounts ........................... 499.99 set 1061880 1967-69 conversion w/red mounts ............................... 499.99 set AC Frame Notch Kit 1064000 1967-92 frame notch kit ............................................... 25.99 ea

1060256

1970-81 Firebird LS Conversion SetsThis unique conversion system takes the guesswork out of installing an LS engine into a 1970-81 Firebird. These sets are designed to use the CTS-V or 1998-02 F-Body oil pan, positioning the engine and transmission with room for most accessory drives, heater boxes, power steering and brakes, and exhaust systems. The motor mounts and transmission crossmember bolt directly to the factory mounting locations. Sets are available for T-56 and 4L60E transmissions with your choice of red or black urethane transmission and motor mounts. Each set includes a transmission crossmember, engine and frame mounts, detailed instructions and mounting hardware. Exhaust headers designed for these sets are available separately. All mounts are protected by a manufacturers lifetime replacement warranty. Made in USA.Important: Notching the frame is required when using 1998-02 F-Body accessory drive with low mount AC compressor. Some modifi cation may be required. Note: No further discounts apply.Conversion With T-56 Transmission Mount 2060256 1970-81 conversion w/black mounts ........................... 499.99 set 2061856 1970-81 conversion w/red mounts ............................... 499.99 set Conversion With 4L60E Transmission Mount 2060260 1970-81 conversion w/black mounts ........................... 499.99 set 2061860 1970-81 conversion w/red mounts ............................... 499.99 set AC Frame Notch Kit 1064000 1967-92 frame notch kit ............................................... 25.99 ea

2061860

1982-92 Firebird LS Conversion SetsThis unique conversion system takes the guesswork out of installing an LS engine into a 1982-92 Firebird. These sets are designed to use the 1998-02 F-Body oil pan, positioning the engine and transmission with room for most accessory drives, heater boxes, power steering and brakes, and exhaust systems. The motor mounts and transmission crossmember bolt directly to the factory mounting locations. Sets are available for T56 and 4L60E transmissions with your choice of red or black urethane transmission and motor mounts. Each set includes a transmission crossmember, engine and frame mounts, detailed instructions and mounting hardware. Exhaust headers designed for these sets are available separately. All mounts are protected by a manufacturers lifetime replacement warranty. Made in USA.Important: Non-V8 cars may require drilling new frame bracket mount locations.Notching of the frame is required when using a 1998-02 F-Body accessory drive system with low mount AC compressor. Some modifi cation may be required. Note: No further discounts apply.Conversion With T-56 Transmission Mount 3060256 1982-92 conversion w/black mounts ........................... 489.99 set 3061856 1982-92 conversion w/red mounts ............................... 489.99 set Conversion With 4L60E Transmission Mount 3060260 1982-92 conversion w/black mounts ........................... 489.99 set 3061860 1982.92 conversion w/red mounts ............................... 489.99 set AC Frame Notch Kit 1064000 1967-92 frame notch kit ............................................... 25.99 ea

3061856

LS Conversion HeadersThese headers are designed for Muscle Rods LS engine mounting kits and are available in a variety of sizes and styles for 4.8L, 5.3L and 6.0L LS engines. A silver ceramic coating keeps temperatures under control and provides a great long-lasting appearance. Each set is designed to clear the factory AC box, power steering, power brakes, crossmember, and oil pan when installed with a Muscle Rod LS conversion kit. Limited lifetime manufacturer's warranty. Made in USA.Important: Some modifi cation may be necessary when used with 4L80E transmissions or column shifters.Not legal on pollution controlled vehicles.Note: No further discounts apply.Mid Length Headers 453661 1967-69 1-3/4" primary tubes ...................................... 629.99 set 451261 1970-81 1-3/4" primary tubes ...................................... 629.99 set 457261 1982-92 1-3/4" primary tubes ...................................... 629.99 set Long Tube Headers 453761 1967-69 1-3/4" primary tubes ...................................... 839.99 set 453961 1967-69 1-7/8" primary tubes ...................................... 839.99 set 454161 1967-69 2" primary tubes ............................................ 939.99 set 451361 1970-81 1-3/4" primary tubes ...................................... 839.99 set 451561 1970-81 1-7/8" primary tubes ...................................... 839.99 set 451761 1970-81 2" primary tubes ............................................ 939.99 set 457361 1982-92 1-3/4" primary tubes ...................................... 839.99 set 457561 1982-92 1-7/8" primary tubes ...................................... 839.99 set 457761 1982-92 2" primary tubes ............................................ 939.99 set Stepped Long Tube Headers 453861 1967-69 1-3/4 to 1-7/8" primary tubes ........................ 939.99 set 454061 1967-69 1-7/8" to 2" primary tubes ............................. 939.99 set 451461 1970-81 1-3/4" to 1-7/8" primary tubes ....................... 939.99 set 451661 1970-81 1-7/8" to 2" primary tubes ............................. 939.99 set 457461 1982-92 1-3/4" to 1-7/8" primary tubes ....................... 939.99 set 457661 1982-92 1-7/8" to 2" primary tubes ............................. 939.99 set

454061

LS Conversion

En

gin

es &

Co

mp

on

en

ts

420

KK


Low Mount SerpentineBelt Drive Complete SetOur set is complete and ready to bolt on. Includes; pulley set, idler kit, power steering kit, GM internal 140 amp alternator, 508 Sanden compressor and front cover, aluminum alternator fan, all mounting bolts, gasketsand belt.Note: *Shipped overweight.No further discounts apply.SP3001* alt, air, no PS, polished ..................................................... 1739.99 set SP3002* alt, air, no PS, chrome ....................................................... 1971.99 set SP3003* low p/side alt, low d/side PS, polished ............................. 1589.99 set SP3004* low p/side alt, low d/side PS, chrome ............................... 1809.99 set SP3005* low d/side alt, low p/side AC w/hi mnt PS polished ......... 2109.99 set SP3006* low d/side alt, low p/side AC w/hi mnt PS chrome .......... 2389.99 set SP3007 low p/side alt only, polished .............................................. 1039.99 set SP3008 low p/side alt only, chrome ............................................... 1169.99 set

Vintage Air Front Runner DriveVintage Air's Front Runner Drive features include a block mounted truss CNC machined from T-6061 billet aluminum available in a bright fi nish with machined fi nished truss or black hardcoat fi nish. The black hardcoat sets include black hardcoated pulleys and black anodized bracket, clutch and tensioner covers. Exclusive Front Runner spring tensioner provides continuous SAE-spec static and dynamic belt tensioning for OEM quality belt life. Hardcoated aluminum pulleys are precision machined, reduce weight and wear like steel. Pulley sizes are engineered and matched for optimum component speeds. This is a very compact package that does not have any of the accessories hanging way past the engine. Each drive uses the compact GM Type II power steering pump (if applicable), Hi-performance water pump and GM 140 amp alternator. The Vintage Air TiteFit Line/compact compressor package is perfect for that nice tight and clean lookImportant: Not compatible with any LT1 engine.Note: Shipped oversize. No further discounts apply.

Bright Front Runner DriveLS1 & LS2 174014 with power steering (includes pump) ........................... 2729.99 set 174016 with power steering (without pump) ............................ 2569.99 set 174015 without power steering ................................................. 2141.99 set LS7 174012 with power steering (includes pump) ........................... 2729.99 set 174019 with power steering (without pump) ............................ 2569.99 set 175012 without power steering ................................................. 2474.99 set L92 LS Front Runner Spacer Set 176005 L92 LS .......................................................................... 244.99 set

Black Hardcoat Front Runner DriveLS1 & LS2 174011 with power steering (includes pump) ........................... 2694.99 set 174017 with power steering (without pump) ............................ 2499.99 set 175011 without power steering ................................................. 2399.99 set LS7 174013 with power steering (includes pump) ........................... 2694.99 set 174018 with power steering (without pump) ............................ 2499.99 set 175013 without power steering ................................................. 2399.99 set L92 LS Front Runner Spacer Set 176005 L92 LS .......................................................................... 244.99 set

OS1

174014


High Mount SerpentineBelt Drive Complete SetThis set locates alternator and AC up high. The perfect solution when cross members and steering gear limit clearance for low mount accessories. The set includes: powers steering set, GM 140 amp alternator complete with aluminum fan and pulley, 508 Sanden compressor with front cover, idler, serpentine belt, all necessary brackets, and hardware. Note: Shipped overweight. No further discounts apply.With Power Steering SP3042 LS1/LS6 Vette, alt, AC & PS polished.............................. 1974.99 set SP3043 LS1/LS6 Vette, alt, AC & PS chrome ............................... 2254.99 set SP3044 LS2 Vette alt, AC & PS polished ...................................... 1974.99 set SP3045 LS2/LS6 Vette, alt, AC & PS chrome ............................... 2254.99 set SP3046 LS1 IROC/TA alt, AC & PS polished ............................... 1974.99 set SP3047 LS1 IROC/TA alt, AC & PS chrome................................. 2254.99 set SP3048 4.8, 5.3 6.0 Alt, AC & PS polished ................................... 1999.99 set SP3049 4.8, 5.3 6.0 Alt, AC & PS chrome ..................................... 2279.99 set SP3050 LS1, LS6, LS2, LS7 Alt & PS only polished .................... 1479.99 set SP3051 LS1, LS6, LS2, LS7 Alt & PS only chrome ..................... 1679.99 set SP3052 IROC/TA Alt & PS only polished ..................................... 1479.99 set SP3053 IROC/TA Alt & PS only chrome....................................... 1679.99 set SP3054 4.8, 5.3, 6.0 Alt & PS only polished ................................. 1489.99 set SP3055 4.8, 5.3, 6.0 Alt & PS only chrome ................................... 1689.99 set Without Power SteeringSP3056 LS1/LS6 Vette, alt, AC polished ....................................... 1479.99 set SP3057 LS1/LS6 Vette, alt, AC chrome ......................................... 1689.99 set SP3058 LS2/LS6 Vette alt, AC & PS polished............................... 1479.99 set SP3059 LS2/LS6 Vette, alt, AC chrome ......................................... 1689.99 set SP3060 LS1 IROC/TA alt, AC polished......................................... 1539.99 set SP3061 LS1 IROC/TA alt, AC chrome .......................................... 1689.99 set SP3062 4.8, 5.3 6.0 alt, AC polished .............................................. 1504.99 set SP3063 4.8, 5.3 6.0 alt, AC chrome ............................................... 1714.99 set

SP3003view on engine

SP3042view on engine

SP3026CSP3026C9

LS Series Engine CoversGive your LS-series engine a cool custom look with these smooth-top covers. These engine covers are manufactured to your specifi cations in your choice of black, red, blue or white (if painted) or real carbon fi ber; custom-fi t to your specifi c LS engine and accessory drive pulley set-up and the option of a pre-cut oil fi ller hole.Note: Specify color, vehicle year/model, type of LS engine and accessory belt drive setup and specify pre-cut oil fi ller hole option and desired color. Special order.No further discounts apply.LSx Ignition Coil Covers SP3026 painted ............................................................................ 344.99 pr SP3026C carbon fi ber ..................................................................... 431.99 pr LS9 Engine Cover SP3026C9 carbon fi ber ..................................................................... 449.99 ea

1967-69 LS1 HeadersStreet & Performance headers have stainless steel head and collector fl anges for optimum gasket sealing. Headers are complete with specially designed gaskets, to further ensure a worry-free seal and pre-installed O

2 sensor bungs. Available in raw

steel or a with a satin silver thermal coating inside and out.Note: Shipped double oversize. No further discounts apply.

SP3024 1967-69 plain ................................................................ 499.99 ea SP3025 1967-69 coated .............................................................. 619.99 ea

SP3025

OS2

LS Conversion

KK

En

gin

es &

Co

mp

on

en

ts

421

Edelbrock Air-Gap Dual Quad LS1Now you can have late model muscle with a classic look with dual quads on a LS1 engine. This dual carburetor set up is designed to maximize performance in the 1500 to 6500 rpm range. Available with or without carburetors and individually in your choice of natural fi nish or with an elegant Endurashine fi nish.Important: Not legal for pollution controlled vehicles. Ships overweight. No further discounts apply.

With CarburetorsThese complete systems include a non-EGR dual quad manifold with tuned and matched Thunder AVS carburetors, an MSD ignition controller that works with the LS1, LS6, LM7, LR4 and LQ4 with 24X ignition systems, wiring harness, MAP sensor, fuel inlet, progressive linkage, gaskets and brackets.Note: Shipped overweight. No further discounts apply, E2068 natural fi nish ......................... 1769.99 set E20684 Endurashine fi nish ................ 1949.99 set

Without CarburetorsAlready have a pair of 500 cfm carburetors? These sets include the non-EGR dual quad manifold, the MSD ignition controller, wiring harness, MAP sensor, gaskets and brackets.Note: *500 cfm Thunder AVS carburetors recommended. No further discounts apply, E7518 * natural fi nish ......................... 879.99 set E75184 * Endurashine fi nish ................. 999.99 set

Manifold OnlyNon-EGR dual-quad manifold in natural fi nish.Note: No further discounts apply. E75187 natural fi nish .......................... 379.99 ea

Edelbrock Performer RPM LS1Looking to install a carburetor on an 1997-02 LS1? Edelbrock has you covered. This performer RPM manifold set comes with the major components needed to install a 600-800 cfm carburetor on a modern LS1, LS6, LM7, LR4 and LQ4, maximizing maximum horsepower and torque from 1500 to 6500 rpm. The system includes a 4 barrel non-EGR manifold, MAP sensor, wiring harness and MSD ignition controller for LS1 24X ignition systems (offers choice of 6 timing curves), along with throttle and trans cable brackets.Note: 600-800 cfm carburetor recommended. Not legal for pollution controlled vehicles. Ships Overweight. No further discounts apply.

E7118 manifold w/ignition control .. 754.99 set E71187 manifold only non-EGR ........ 289.99 ea

1955-87 Holley Retrofi t LS Oil PanHolley's Retro LS oil pan is designed for maximum chassis and ground clearance on 1955-87 GM rear wheel drive V8 applications originally equipped with a rear sump oil pan. Each pan is made from machined cast aluminum and uses an original style oil fi lter and gasket. Features provisions for a factory style oil cooler and attachment points for the factory bellhousing. Set includes sump baffl e, pick-up tube, sump plug, oil fi lter stud, and oil passage cover.Note: Requires the use of LS3 dipstick and dipstick tube. No further discounts apply. H3021 1955-87 LS engines ............ 344.99 set

LS Cast Iron Exhaust ManifoldsThese Hooker cast iron exhaust manifolds are designed to hug the engine block closely so they will work with a variety of LS engine swaps or as a replacement. The contoured shape increases fl ow and performance over stock manifolds with a traditional look. Fits all LS engines up to 500 horsepower except LS7 and LS9 and have been proven to fi t 1970-81 F-Body vehicles. Made from hi-silicon ductile iron for years of durability and corrosion resistance. Available in a range of different fi nishes.Note: Not C.A.R.B. certifi ed and may not be legal for use in some states on pollution controlled vehicles. No further discounts apply. 85010 raw fi nish ................................ 284.99 pr 85013 black ceramic fi nish ............... 379.99 pr 85011 silver ceramic fi nish ............... 379.99 pr 85014 titanium ceramic fi nish ........... 379.99 pr 85015 cast iron gray ceramic fi nish .. 379.99 pr

85010


LS Coil Covers - Big-Block-StyleThese coil covers from Holley Performance give modern LS engines a classic big block appearance. Made from a lightweight, durable composite that can be painted to match any color scheme and designed to fi t on LS2, LS3 and LS7 and other LS-family engines using LS3 style valve covers and coils. Set includes covers, OE style ball mount snap on studs, oil cap, oil fi ll adaptor and detailed installation instructions.Important: Covers are a universal fi t and require trimming for proper installation. No further discounts apply. H2421 LS coil covers ........................ 134.99 set

LS1/LS6/Vortec Engine Mount PlatesThese engine mount plates are needed when installing a LS1, LS6 or Vortec engine into a vehicle that was originally equipped with a small block engine. Available in a 4 piece set that includes the plates and motor mount pads or the plates can be purchased separately. Includes grade 8 hardware. 4592 2 plates with 2 pads .................. 71.99 set 4572 2 plates only ............................. 55.99 set

1967-69 LS- Engine PlatesLS- engine adapter plates for 1967-69 Firebird models. The introduction of the LS- engine halted the ease of interchangeability between muscle and modern cars. By fl ipping the engine mounts upside down, the LS- sits lower in the chassis and as far back against the fi rewall as possible giving you good weight distribution and improved center of gravity. These LS- engine plates are CNC machined from 6061-T6 aluminum and allows the simple installation of an LS- style engine using standard small block motor mounts in your 1967-69 Firebird. AT1003 1967-69 LS- engine plates ... 139.99 pr

4592

LS Oil Pans For Conversion KitsThese OE pan kits include the gasket, windage tray, oil pick up tube, and mounting hardware. An optional oil pump pick up tube girdle corrects the fi t and seal of the pick up tube in the oil pump with an extra bolt to clamp it in place.Important: *Machined for bypass valve.Note: Must be used in conjunction with LS conversion sets. No further discounts apply. 1026100 LH8 oil pan ........................... 269.99 set 1026102 * LH8 oil pan ........................... 289.99 set 1026300 CTS-V oil pan ....................... 409.99 set 1026200 1998-2002 F-body oil pan ..... 409.99 set 1026000 oil pick up tube girdle ........... 26.99 ea

E7118

E7518

1967-81 Firebird Billet LSx Engine MountsEnhance the underhood appearance of your Firebird by replacing the OEM engine mounts with these universal-style billet LSX engine mounts. Comes with all required hardware and bushings for a complete installation. Available in a variety of fi nishes to suit your tastes. FB1110N 1967-81 natural ................... 254.99 set FB1110P 1967-81 polished ................ 289.99 set FB1110B 1967-81 black ..................... 289.99 set FB1110C 1967-81 chrome .................. 324.99 set

FB1110P

LS Conversion

1026100

En

gin

es &

Co

mp

on

en

ts

422

KK


LS Crank CoverComplete the look, our crank cover gives your motor that “fi nished” look.Note: Use blue locktite on the cover bolts. No further discounts apply.

PolishedSP3013 LS-1 IROC/TA ......................... 82.99 ea SP3018 LS-1 IROC/TA ......................... 84.99 ea SP3020 LS-2 Vette................................. 84.99 ea SP3022 LS-7 Vette................................. 84.99 ea ChromeSP3019 LS-1 Vette................................. 99.99 ea SP3017 LS-1 IROC/TA ......................... 99.99 ea SP3021 LS-2 Vette................................. 99.99 ea SP3023 LS-7 Vette................................. 99.99 ea

Joe Gibbs LS30 Synthetic OilThis LS30 synthetic 5W-30 oil is specifically formulated for high performance LS-series engines such the 6.2L LS3 found in the 5th generation Camaro SS or the 6.2L supercharged LSA under the hood of the new ZL1. Using advanced synthetic-based oils, LS30 delivers high temperature and high shear protection, making it ideal for high performance LS engines, especially those that have been turbocharged or supercharged. JG1320 5W30 quart ....................... 10.99 ea JG1321 5W30 case of 12 quarts .... 131.99 cs

MSD Atomic EFI LS SetThis EFI system makes installing and tuning an LS engine easy! A power module, an ECU, and most of the wiring is built into the fuel rails to keep installation simple. A handheld tuner enables quick setup and custom programming. Available for LS2/LS3, L92, LS7 as well as Gen III and Gen IV truck engines. Installation kits for LS1/LS6 engines available separately. Supports up to 1,000 hp.Note: Fuel pump not included. Special order, must be prepaid. No further discounts apply.Important:* Gen III 1999 to mid 07. Gen IV late 2007-13. ** Use with 29501.Atomic EFI Sets 29571 * Gen III LS ............................ 1699.99 set 29581 * Gen IV LS ............................ 1699.99 set 29501 LS2/LS3 & L92 .................... 1699.99 set 29601 LS7 ....................................... 1999.99 set Installation Sets 29551 ** LS1/LS6 install kit ............... 174.99 set

LS1 Water Neck and ThermostatDepending on your engine and application you will need one of these water necks to simplify your conversion. With three available, all you need to do is verify which will work for you.All water necks are polished.Note: No further discounts apply.SP3064 1997-03 360º swivel/15º neck 119.99 set SP3065 1997-03 360º swivel/45º neck 119.99 set SP3066 1997-03 straight neck ............ 84.99 set SP3067 2004-up 360º swivel/15º neck 104.99 set SP3068 2004-up 360º swivel/45º neck 104.99 set SP3069 2004-up straight neck ............ 99.99 set

SP3064 SP3066

SP3014

Alternator Adapter PlugsThese handy plugs will make your life much easier. They provide direct fi t connections without the trouble of splicing wires.Note: No further discounts apply.CS 130 & 144SP3014 gauge #12102921 .................... 29.99 ea SP3015 light #12083462 ...................... 29.99 ea SI ConversionSP3016 ext. to int. reg .......................... 17.99 ea

1997-06 Crankshaft BalancersYou’ll need to know what balancer you have to be able to order the right belt system. Corvette is the thinnest while truck balancers are the thickest.Corvette-LS1, LS6G9361 1997-05 .................................. 132.99 ea IROC/TAG3888 1998-02 .................................. 73.99 ea C/K TruckG9363 2003-06 .................................. 169.99 ea

G9361

Conversion Adapters For GaugesThis oil pressure tree will relocate your oil pressure sensor to above the oil fi lter. The 12mm coolant adaptor taps to the rear of the passenger side head for VDO and Dakota Digital gauges.Note: No further discounts apply.SP3040 oil pressure tree ........................ 29.99 ea SP3041 12mm coolant sensor adaptor .. 24.99 ea

SP3040

S9501

SP3041

LS1 Single Fuel Line Filter/Regulator SetThis handy set will allow you to maintain a single fuel line running to the engine, making for a “clean” installation. By localizing the fi lter and regulator for the return of excess fuel to the tank, it cleans up and simplifi es this critical portion of the conversion. Includes a 3/8" and a 5/16" stainless steel fi tting.Note: No further discounts apply.SP3029 fi lter kit ................................... 184.99 ea

1998-02 LS1 Alternator Mounting SetEliminate excess belt length and tensioners. This set mounts the alternator with a shorter, manually adjusted belt. To use smaller pulleys, simply change belts. Black anodized aluminum construction. Includes hardware. For use with electric water pump without PS or AC.Note: No further discounts apply.BX50004 1998-02 .............................. 149.99 set


SP3013

LS Conversion

KK

En

gin

es &

Co

mp

on

en

ts

423

Pontiac Style Track Serpentine ConversionThis serpentine belt conversion for Pontiac 326-455ci V8 engines customizes your engine bay and provides rigid support for the alternator and AC compressor with an optional bracket for models with power steering. Three separate idlers maintain belt to pulley contact for “no slip” operation once belt tension has been set with the convenient adjustment tool. Includes mounting hardware and instructions. Available in chrome or your choice of maintenance-free powder coating in clear, black onyx, or black. Made in USA.Important: Sets require a 1968 or newer 4 bolt balancer without v-groove and a 1969 or newer 11 bolt timing cover. 1970 and newer models require an electric fuel pump.Note: Sets do not include power steering hoses or remote reservoir. No further discounts apply.

Sets Include• Chrome Or Billet 105 Amp Alternator • Alternator Pulley w/Fan And Nose Cover• Chrome Sanden AC Compressor• Edelbrock Water pump and pulley• Alternator/AC Bracket• Crank pulley• 3 Idler Pulleys (2 On 13145 & 13150 Series Sets)• Belt Tensioning Tool• Mounting Hardware

Sets With Power Steering Also Include• Power Steering Pulley w/Nose Cover• Brackets• Mounting Hardware• GM Type 2 Or Chrome Canister and Billet Canister Power Steering Pumps

1967-69 w/AC And Type 2 PS PumpNote: Sets require a 71" 6 rib serpentine belt 1314006 chrome .............................. 2329.99 set 13140 clear powder coat .............. 1959.99 set 1314007 black onyx powder coat .... 2139.99 set 1314008 black powder coat ............. 1965.99 set

1970+ w/AC And Type 2 PS PumpNote: Sets require a 69.5" 6 rib serpentine belt. 1313506 chrome .............................. 2329.99 set 13135 clear powder coat .............. 1849.99 set 1313507 black onyx powder coat .... 2019.99 set 1313508 black powder coat ............. 1849.99 set

w/AC w/o Power SteeringNote: Sets require a 68" 6 rib serpentine belt. 13130 clear powder coat .............. 1599.99 set 1313008 black powder coat ............. 1599.99 set

w/o AC w/Chrome PS PumpNote: Sets require a 65" 6 rib serpentine belt. 1314506 chrome .............................. 2329.99 set 13145 clear powder coat .............. 1679.99 set 1314508 black powder coat ............. 1679.99 set

w/o AC w/Billet Alt And PS PumpNote: Sets require a 65" 6 rib serpentine belt. 13150 clear powder coat .............. 1899.99 set 1315008 black powder coat ............. 1899.99 set

Pontiac Sport Track Serpentine ConversionUpgrade your V-belt pulleys to a more effi cient serpentine system from March Performance and get style with no-slip operation. Each set features a stout one-piece combination alternator and A/C bracket and an oversize crank pulley to improve low-speed cooling and charging. Choose from the Sport Track sets with black or silver powder coated bracket and black powder coated pulleys, or upgrade to Ultra Sport Track with clear powder coated brackets, pulleys, and pulley covers. Includes all applicable mounting hardware. Sets are available for Pontiac 326, 350, 389, 400, 421, 428, and 455ci V8 engines. Made in USA.Important: Sets require a 1968 or newer 4 bolt balancer without v-groove and a 1969 or newer 11 bolt timing cover. 1970 and newer models require an electric fuel pump.Note: Sets with Type 2 power steering pumps do not include hoses or remote reservoir. No further discounts apply.

Sets Include• Tuff Stuff Chrome 105 Amp Alternator• Alternator Pulley And Fan• Chrome Sanden AC Compressor• Edelbrock Water Pump And Pulley• Alternator/AC Bracket• Crank Pulley• 3 Idler Pulleys For Better Belt Wrap• Belt Tensioning Tool• Billet Pulley Cover Caps (Ultra Sets Only)

Sets With Power Steering Also Include• Tuff Stuff GM Type 2 Power Steering Pump• Power Steering Pulley• Billet Pulley Cover Cap (Ultra Sets Only)• Power Steering Bracket

1967-69 w/AC And Type 2 PS PumpNote: Sets require a 71" 6 rib serpentine belt.Sport Track 1320508 black powder coat ............. 1779.99 set 1320509 silver powder coat ............. 1779.99 set Ultra Sport Track 13225 clear powder coat .............. 2109.99 set

1970+ w/AC and Type 2 PS PumpNote: Sets require a 69.5" 6 rib serpentine belt.Sport Track 1321508 black powder coat ............. 1804.99 set 1321509 silver powder coat ............. 1804.99 set Ultra Sport Track 13230 clear powder coat .............. 2109.99 set

w/AC w/o Power SteeringNote: Sets require a 68" 6 rib serpentine belt.Sport Track 1320008 black powder coat ............. 1477.99 set 1320009 silver powder coat ............. 1477.99 set Ultra Sport Track 13220 clear powder coat .............. 1699.99 set

13225

13140

Three Idler Pulleys For No-Slip Operation! Three Idler Pulleys EnsureNo-Slip Operation!

Pontiac Revolver Serpentine ConversionThis serpentine belt conversion for Pontiac 326-455ci V8 engines customizes your engine bay and provides rigid support for the alternator and AC compressor with an optional separate bracket that allows for models with power steering. Three separate idlers maintain belt to pulley contact for “no slip” operation once belt tension has been set with the convenient adjustment tool. Includes mounting hardware and instructions. Available in chrome or your choice of maintenance-free powder coating in clear, black onyx, or black. Made in USA.Important: Sets require a 1968 or newer 4 bolt balancer without v-groove and a 1969 or newer 11 bolt timing cover. 1970 and newer models require an electric fuel pump.Note: Sets do not include power steering hoses or remote reservoir. No further discounts apply.

Sets Include• Chrome 105 Amp Alternator • Alternator Pulley w/Fan And Nose Cover• Chrome Sanden AC Compressor• Edelbrock Water pump and pulley• Alternator/AC Bracket• Crank pulley• 3 Idler Pulleys For Better Belt Wrap • Belt Tensioning Tool• Mounting Hardware

Sets With Power Steering Also Include• Power Steering Pulley w/Nose Cover• Brackets• Mounting Hardware• GM Type 2 Power Steering Pump

1967-69 w/AC And Type 2 PS PumpNote: Sets require a 71" 6 rib serpentine belt 1317006 chrome ............................... 2329.99 set 13170 clear powder coat ............... 1901.99 set 1317007 black onyx powder coat ..... 2099.99 set 1317008 black powder coat .............. 1901.99 set

1970+ w/AC And Type 2 PS PumpNote: Sets require a 69.5" 6 rib serpentine belt. 1316506 chrome ............................... 2329.99 set 13165 clear powder coat ............... 1849.99 set 1316507 black onyx powder coat ..... 2099.99 set 1316508 black powder coat .............. 1849.99 set

w/AC w/o Power SteeringNote: Sets require a 68" 6 rib serpentine belt. 13160 clear powder coat ............... 1599.99 set 1316008 black powder coat .............. 1599.99 set

13170

March Performance Pulleys


En

gin

es &

Co

mp

on

en

ts

424

KK


Pontiac V-8 Serpentine Conversion 1967-Up 326, 350, 389, 400, 455 C.I.Customize your engine compartment and virtually eliminate the risk of thrown belts with this one-belt serpentine system. Each part is machined from solid 6061-T6 aluminum and fi nished with a maintenance-free clear powder coat to eliminate the need for polishing. Features stainless steel rods with chrome moly ends to keep belt tension perfect. Made in USA.Important: Sets requires a 1968 or newer balancer (without v-groove), and a 1969 or newer standard rotation water pump (4-1/2") and an 11 bolt timing cover. Keyway type Saginaw p/s pumps were used on 1971-74 Firebirds, press fi t type Saginaw p/s pumps were used on 1975-79 Firebirds. Note: Serpentine belt not included. No further discounts apply. Alternator Only Sets Include:

• Crank pulley• Water pump pulley and nose cover• Alternator pulley with fan and nose cover• Alternator bracket with stainless steel tensioner

Power Steering Sets Include: • Power steering bracket and pulley• Power steering front and rear mounting brackets• Idler pulley with cover

Air Conditioning Sets Include:• AC clutch cover• AC front and rear mounting brackets• Stainless steel tensioning rod • Dual idlers with covers• All necessary hardware

All Inclusive Sets Include:• Chrome Tuff Stuff or billet alternator• Chrome Tuff Stuff AC compressor.• Natural fi nish Edelbrock water pump.• Chrome Tuff Stuff or billet PS pump

Alternator Only SetNote: Set requires a 49" 6 rib serpentine belt. 13100 ...................................................................................................................................... 439.99 set

Alternator With Power Steering SetsNote: Set requires a 66" 6 rib serpentine belt. 13105 with keyway type PS pulley ......................................................................................... 689.99 set 13110 with press-fi t type PS pulley ......................................................................................... 689.99 set

Alternator With Power Steering And AC SetsNote: Set requires a 94.5" 6 rib serpentine belt. 13120 with keyway type PS pulley ......................................................................................... 1079.99 set 13125 with press fi t type PS pulley ......................................................................................... 1079.99 set

All Inclusive Sets With Alternator And Power SteeringNote: Set requires a 66" 6 rib serpentine belt. A8700200 clear powder coated brackets w/chrome accessories .................................................... 986.99 set A8700201 clear powder coated brackets w/billet accessories ....................................................... 1181.99 set A8700202 black powder coated brackets w/billet accessories....................................................... 1181.99 set

All Inclusive Sets With Alternator Power Steering And ACNote: Set requires a 94.5" 6 rib serpentine belt. A8700203 clear powder coated brackets w/chrome accessories .................................................... 1894.99 set A8700204 clear powder coated brackets w/billet accessories ....................................................... 2075.99 set A8700205 black powder coated brackets w/billet accessories....................................................... 2075.99 set


Pontiac V-Groove PulleysPerformance Series pulleys increase horsepower by reducing accessory drag. 12.5-15 additional h.p. at the rear wheels is typical. Designed for normal street driving, these CNC machined pulleys run perfectly true which eliminates belt throwing. Made of 6061-T6 aluminum for extra strength and wear resistance. Crank and water pump pulleys measure 6-1/8" in diameter and alternator pulleys measure 2-11/16" in diameter. Finished with a “No Polishing” clear powdercoat. Important: Set requires 1968 or newer dampener, 1969 or newer water pump (4-1/2" long) and an 11 bolt timing cover. Optional p/s pulley, overdrive crank pulley and alternator fan sold separately.Note: No further discounts apply.Single groove applications13011 1-groove crank pulley .............. 84.99 ea 13012 1-groove water pump pulley .... 99.99 ea 137 1-groove alt pulley w/cover ..... 49.99 ea 13010 3-piece pulley set ..................... 224.99 set Double groove applications13031 2-groove crank pulley .............. 89.99 ea 13032 2-groove water pump pulley .... 99.99 ea 137 1-groove alt pulley w/cover ..... 49.99 ea 13030 3-piece pulley set ..................... 239.99 set Triple groove applications13051 3-groove crank pulley .............. 94.99 ea 13032 2-groove water pump pulley .... 99.99 ea 137 1-groove alt pulley w/cover ..... 49.99 ea 13050 3-piece pulley set ..................... 239.99 set Overdrive Crank Pulley13041 3-groove 8" .............................. 109.99 ea Power Steering Pulley540 1 groove 6", keyway style ....... 72.99 ea Alternator Fan221 billet ......................................... 49.99 ea

Sanden AC Compressor ManifoldCustom AC compressor manifold for March Performance pulley sets with 7176 compressors. It reroutes the compressor lines downward where they are less visible and less vulnerable to exhaust heat. Manifolds are available unfi nished, polished, chrome, or black.Note: No further discounts apply.

MP4180 raw fi nish .............................. 109.99 ea MP4181 polished ................................ 124.99 ea MP4182 chrome .................................. 124.99 ea MP4183 black ..................................... 109.99 ea

MP4182

Billet Remote ReservoirThis billet aluminum power steering reservoir is designed for March Performance pulley sets that use GM type 2 power steering pumps. Includes cap and billet aluminum mounting bracket.Note: No further discounts apply.

MP450 billet remote reservoir ............ 195.99 ea

1965-00 Braided Power Steering HosesThese braided stainless steel power steering hose sets are designed for March Performance pulley sets that use GM type 2 power steering pumps with a remote reservoir. Includes three hoses that connect the pump and reservoir to the steering box. Cut to desired length.Note: For March pulley sets using GM type 2 steering pumps only. No further discounts apply.

Rack & Pinion Steering MP3211 1974-78 Mustang II ............. 229.99 set MP3244 1979-95 Mustang ................. 229.99 set GM steering Box MP3222 1965-78 SAE inverted fl are . 229.99 set MP3233 1979-00 metric o-ringed ...... 229.99 set

MP3244

Power steering pump with bolt hole or stud located here is required for kits that include power steering.

Power steering pump without hole or stud will NOT work.

YESNO

Power Steering Pump Requirements


KK

En

gin

es &

Co

mp

on

en

ts

425March Performance Pulleys

Serpentine Belt Ultra SetsChrome AC compressor and Alternator. Tensioner and brackets include the housing covers. Water pump, alternator and power steering pulleys with nose covers. Alternator pulley with machined fan includes nose cover.

Chevrolet Small Block Ultra SetsAlternator and AC Only - 61" Serpentine Belt MP202501 clear powder coat ......................................................... 2019.99 set MP202502 chrome ......................................................................... 2559.99 set MP202504 black powder coat ........................................................ 2042.99 set Alternator, AC and Power Steering Pump - 62" Serpentine Belt MP202601 clear powder coat ......................................................... 2289.99 set MP202602 chrome ......................................................................... 2924.99 set MP202604 black powder coat ........................................................ 2289.99 set

Serpentine Belt Custom SetsNon-polished AC compressor and Alternator. Alternator pulley with standard steel bladed fan.

Chevrolet Small Block Custom SetsAlternator and AC Only - 61" Serpentine Belt MP202751 clear powder coat ......................................................... 1579.99 set MP202754 black powder coat ........................................................ 1602.99 set Alternator, AC and Power Steering Pump - 62" Serpentine Belt MP202851 clear powder coat ......................................................... 1859.99 set MP202854 black powder coat ........................................................ 2199.99 set

March “Ultra Drive” Front Mount Serpentine SetsThis system has been designed to mount accessories below the valve covers and between the width of the heads on small block Chevrolet engines. Precision CNC machined from 6061-T6 aluminum for strength and perfect fi t, hardcoated on high wear areas and clearcoated to eliminate polishing in those hard to reach places to look great for years to come. Set is designed to fi t Ram Jet, TPI, Single and multi carb engines and includes an oversize crank pulley that aids in driving your alternator, AC and water pump at idle, where it counts.Note: Serpentine belts are not included in any of the sets, however the belt length is included below for information purposes. All sets include short reverse water pump. Power steering hoses and reservoir not included. Shipped overweight.No further discounts apply.

Serpentine Belt Deluxe SetsChrome A/C compressor and Alternator. Tensioner and brackets include the housing covers. Alternator pulley with aluminum fan.

Chevrolet Small Block Deluxe SetsAlternator and AC Only - 61" Serpentine Belt MP202701 clear powder coat ......................................................... 1799.99 set MP202704 black powder coat ........................................................ 1822.99 set Alternator, AC and Power Steering Pump - 62" Serpentine Belt MP202801 clear powder coat ......................................................... 2079.99 set MP202804 black powder coat ........................................................ 2079.99 set

Chevrolet Small Block Revolver Serpentine SetsAlternator and AC Only

w/o Power Steering for 59" Serpentine Belts. MP211101 clear powder coat ......................................................... 1484.99 set MP211102 chrome ......................................................................... 1959.99 set MP211103 black onyx powder coat .............................................. 1634.99 set MP211104 black powder coat ........................................................ 1484.99 set

Keyway Saginaw Pump & Canisterw/Power Steering for 64" Serpentine Belts. MP211651 clear powder coat ......................................................... 1894.99 set MP211652 chrome ......................................................................... 2259.99 set MP211653 black onyx powder coat ............................................... 1949.99 set MP211654 black powder coat ........................................................ 1894.99 set

Type 2 Power Steering Pumpw/Power Steering for 62" Serpentine Belts. MP211601 clear powder coat ......................................................... 1794.99 set MP211602 chrome ......................................................................... 2294.99 set MP211603 black onyx powder coat ............................................... 1949.99 set MP211604 black powder coat ........................................................ 1794.99 set

March “Revolver” Serpentine Sets for Short Water PumpThis serpentine conversion offers the same combination of style and low price as the popular Style Track alternator, AC and power steering set, but cool Revolver styling. The styled one piece bracket provides a rigid support for the alternator and AC compressor; a separate bracket allows the option of power steering or no power steering. The Revolver uses a unique, easy to use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time the belt requires adjustment. The Revolver offers a much cleaner appearance as a result. Includes instructions and hardware. Features maintenance-free clear, black or black onyx powdercoat or chromed .Important: No cylinder head accessory holes needed for mounting. Serpentine belt is not included with any set. Lengths of belts are listed below and are also listed in the instructions. Power steering hoses and reservoir not included. Note: Shipped overweight. No further discounts apply.

black onyxpowdercoat fi nish

chrome fi nish

chrome fi nish

clear powdercoat fi nish

clearpowdercoat fi nish

black powdercoat fi nish

blackpowdercoat fi nish


Shown With Optional MP4182 A/C Manifold

Available Finishes

Available FinishesSets Include

• AC Compressor• 140 Amp Alternator• Aluminum Reverse Rotation Water Pump• GM Type 2 Power Steering Pump• Spring Loaded Tensioner• AC, Alternator & Power Steering Brackets• Crankshaft Pulley

• Water Pump Pulley• Power Steering Pulley• Alternator Pulley w/Fan• Wing Cross Emblem• A/C Line Fittings• Grade 8 Mounting Hardware

Sets Include• Chrome AC Compressor• Chrome 105 Amp Alternator• Aluminum Reverse Rotation Water Pump• GM Type 2 Power Steering Pump or Chrome Saginaw Power Steering Pump• AC, Alternator & Power Steering Brackets• Crankshaft Pulley• Water Pump Pulley• Power Steering Pulley w/Cover• Alternator Pulley w/Machined Fan & Nose Cover• Belt Tensioning Tool• Grade 8 Mounting Hardware

En

gin

es &

Co

mp

on

en

ts

426

KK


Small Block Chevrolet V-Belt Pulley SetsPerformance pulleys can free up to an additional 12-15 horsepower at the rear wheels by reducing accessory drag and eliminate belt-throwing. The High Water Flow Ratio V-Belt pulley sets are designed for daily street driving, they aid cooling by increasing water fl ow and fan speed. Both sets are precision CNC machined from 6061-T6 aluminum to run perfectly true. Designed for extra strength and fi nished with a “No Polishing” clear powder coat. All sets include a crank pulley, water pump pulley and single groove alternator pulley.Note: No further discounts apply.

Performance - Short Water PumpMP6010 1V crank, 1V water pump............................................... 199.99 set MP6015 2V crank, 1V water pump............................................... 214.99 set MP6030 2V crank, 2V water pump............................................... 224.99 set MP5090 3V crank, 2V water pump............................................... 239.99 set Performance - Long Water PumpsMP6050 1V crank, 1V water pump............................................... 214.99 set MP6070 2V crank, 1V water pump............................................... 219.99 set MP6090 3V crank, 2V water pump............................................... 224.99 set MP6095 3V crank, 3V water pump............................................... 244.99 set High Flow - Short Water PumpsMP6110 1V crank, 1V water pump............................................... 209.99 set MP6120 2V crank, 2V water pump............................................... 224.99 set MP6130 2V crank, 1V water pump............................................... 229.99 set MP6140 3V crank, 2V water pump............................................... 242.99 set High Flow - Long Water PumpsMP6160 1V crank, 1V water pump............................................... 231.99 set MP6170 2V crank, 1V water pump............................................... 234.99 set MP6190 3V crank, 2V water pump............................................... 239.99 set

Small Block Chevrolet Performance Serpentine Ultra SetsUltra Set w/o Power Steering

Note: Sets require a 42.5" alternator beltMP220131 clear powder coat ............................................................ 399.99 set MP220134 black powder coat ........................................................... 399.99 set

Ultra Set w/Power SteeringNote: Sets require 42.5" alt belt & 33.5" 5-rib ps belt.1966-74 Keyway Saginaw Pump & CanisterMP220231 clear powder coat ............................................................ 584.99 set MP220234 black powder coat ........................................................... 584.99 set 1978-87 Press Fit Saginaw Pump with CanisterMP220331 clear powder coat ............................................................ 584.99 set MP220334 black powder coat ........................................................... 584.99 set 1978-87 Press Fit Saginaw Metric PumpMP220381 clear powder coat ............................................................ 584.99 set MP220384 black powder coat ........................................................... 584.99 set

Small Block Chevrolet High Water Flow Serpentine Ultra SetsUltra Set w/o Power Steering

Note: Sets require a 42.5" alternator beltMP220431 clear powder coat ............................................................ 399.99 set MP220434 black powder coat ........................................................... 399.99 set

Ultra Set w/Power SteeringNote: Sets require 42.5" alternator belt & 33.5" 5-rib power steering belt.1966-74 Keyway Saginaw Pump & CanisterMP220531 clear powder coat ............................................................ 584.99 set MP220534 black powder coat ........................................................... 584.99 set 1978-87 Press Fit Saginaw Pump with CanisterMP220631 clear powder coat ............................................................ 584.99 set MP220634 black powder coat ........................................................... 584.99 set 1978-87 Press Fit Saginaw Metric PumpMP220681 clear powder coat ............................................................ 584.99 set MP220684 black powder coat ........................................................... 584.99 set

March “Mid Mount” Alternator and Power Steering Serpentine Conversion Ultra Sets for Long Water PumpSimple yet exceptionally styled, this new “Mid Mount” Alternator and Power Steering serpentine set for small block Chevrolet engines offers an exciting new look! A new higher mounted power steering pump bracket helps clear the steering gear box in some vehicles. Retains your standard rotation water pump. Available with performance pulleys which increase horsepower or high water fl ow ratios pulleys for increased cooling. CNC machined from solid billet 6061-T6 aluminum for a spectacular machined fi nish with perfect fi t and extra high strength. Designed for a great appearance from any angle, these brackets are even machined on the engine facing side. All billet pulleys and brackets have a “No Polishing” maintenance-free clear powder coating. Also available black powder coated.Note: Serpentine Belts are not included with sets. Length of belt is listed below and also listed in the instructions. All alternator belts are 6 rib. Alternators, power steering pump and water pump not included. No further discounts apply.


Small Block Chevrolet Pro-Track Serpentine Setsw/o Power Steering

Serpentine Sets For 59" BeltsMP211151 clear powder coat ........................................................... 1584.99 set MP211152 chrome ........................................................................... 2084.99 set MP211153 black onyx powder coat ................................................. 1734.99 set MP211154 black powder coat .......................................................... 1584.99 set

w/Power SteeringRemote Type Reservoir Power Steering - 62" BeltsMP211201 clear powder coat ........................................................... 1894.99 set MP211202 chrome ........................................................................... 2394.99 set MP211203 black onyx powder coat ................................................. 2044.99 set MP211204 black powder coat ......................................................... 1894.99 set Saginaw Type Reservoir Power Steering - 64" BeltsMP211251 clear powder coat ........................................................... 1994.99 set MP211252 chrome ........................................................................... 2459.99 set MP211253 black onyx powder coat ................................................. 2119.99 set MP211254 black powder coat .......................................................... 1994.99 set

March “Pro-Track” Serpentine SystemsMarch Performance’s new billet aluminum Pro-Track serpentine system for small block Chevrolet engines features a 1" thick one-piece alternator and air conditioning bracket. A separate bracket allows the option of remote or canister style power steering. Adjustment tool is removable and included. Available powdercoated in clear, black, black onyx or chromed.Note: Serpentine belt is not included with any set, however length of belt is listed below and included in the instructions. Power steering hoses and reservoir not included. Shipped overweight. No further discounts apply

clear powdercoat fi nish black powdercoat fi nish


Available Finishes

Performance Sets Include• Crank Shaft Pulley• Water Pump Pulley w/Cover• Alternator Pulley w/Fan & Cover• Alternator Bracket w/Relocation Arm• Alternator Bracket Adjustment Tool• Stainless Steel Tensioning Rod

Sets Include• Chrome AC Compressor• Chrome 105 Amp Alternator• Aluminum Reverse Rotation Water Pump• GM Type 2 Power Steering Pump• AC, Alt. & Power Steering Brackets• Crankshaft Pulley

High Water Flow Sets Include• Chrome Moly Rod Ends• Mounting Hardware• Power Steering Bracket• Power Steering Pulley

MP6090

• Water Pump Pulley• AC Compressor Cover• Alternator Pulley w/Machined Fan & Cover• Power Steering Pulley & Cover• Grade 8 Mounting Hardware• Belt Tensioning Tool

KK

En

gin

es &

Co

mp

on

en

ts

427

SFI BalancersSFI specifi cation harmonic balancers are a must for high RPM engines and required on most tracks. These small block Chevrolet balancers have been tested for two hours at 12,000 RPM to meet or exceed all SFI specifi cations. All balancers feature laser etched degree marks for timing adjustments.Note: *Has removable weights and works with internally or externally balanced enginesInternal Balance38681 6-5/8" x 1-1/2" 283-350 ci ...... 132.99 ea 38701 6-5/8" x 1-1/2" 350 ci .............. 147.99 ea Internal/External Balance38691* 6-3/4" x 1-3/8" 400 ci .............. 132.99 ea 38711* 8" x 1-3/8" 400 ci .............. 147.99 ea

Balancers/Crankshaft Pulleys

Harmonic Balancers/Crankshaft Pulleys

1968-79 Harmonic BalancerHarmonic balancers for 1968-79 Pontiac V8 engines. Balancers are available in stock and heavy duty versions. Heavy duty balancers were slightly lighter than the stock version and commonly used on RA II, RA IV andHO models. A8700168 stock balancer 7.90 lb ......... 164.99 ea A8700169 heavy duty balancer 7.65 lb 235.99 ea

A8700168

1967 Pontiac Harmonic BalancerThis original style two piece balancer replaces all 1967 Pontiac 5-1/2" six bolt V8 balancers. Features dual timing marks and includes a reinforcement plate, 6 grade eight bolts with washers and a new woodruff key. N585 1967 2 piece balancer ......... 179.99 ea

38681

66514

F12364G2127

1967-81 CrankshaftBalancer HardwareReproduction and original GM hardware for mounting the crankshaft pulley & harmonic balancer.Crankshaft Pulley Bolt SetTA4023 1977-79 Olds 403 .................. 6.99 set A8700172 1967-79 Pontiac V8 ............... 8.99 set Crankshaft Pulley Reinforcement/SpacerTA4022 1977-79 Olds 403 .................. 9.99 ea A8700171 1967-72 Pontiac V8 ............... 7.99 ea Crankshaft KeysG9283 1977-81 Chevy SB, 3/16"x3/4" .99 ea TA4025 1977-79 Olds 403 .................. 5.99 ea Harmonic Balancer BoltG5886 1977-81 Chevy SB ................. 3.99 ea Harmonic Balancer WasherG9287 1977-81 Chevy SB ................. 4.99 ea Harmonic Balancer Bolt & Washer SetTA4024 1977-79 Olds 403 .................. 14.99 ea A8700170 1967-79 Pontiac V8 ............... 11.99 set

Harmonic Balancer CoversAdd a custom high performance look to your harmonic balancer by installing this aftermarket cover. Your choice of blue, black, billet, chrome or red. Available for 6-3/4" and 8" small block Chevrolet balancers.Note: Please specify color when ordering.66517 6-3/4" diameter ......................... 29.99 ea 66518 8" diameter ............................... 29.99 ea

Harmonic Balancer ToolsHarmonic balancer tools for Chevrolet, Ford and Chrysler engines. Choose from a heavy duty tool with roller thrust bearings and 7/16"-20, 5/8"-18, and 3/4"-16 adapters and various removal hardware. or a standard duty tool for easy installation and removal of the harmonic balancer.66515 standard, install only ................. 29.99 ea 66514 professional, removal/install ..... 79.99 set

1977-92 Replacement Harmonic BalancersReplace your worn, damaged or missing harmonic balancer with a Genuine GM service part or a quality reproduction. Note: *Center timing mark

Chevrolet Small Block V8G2127 1977-80 305, 350-L ............. 111.99 ea G2127 1981-87 5.0 .......................... 111.99 ea G2127 1988-92 5.0-E ...................... 111.99 ea Internal Balance66509* 350ci, 6-3/4" dia. ....................... 64.99 ea 66510 350ci, 6-3/4" dia. ....................... 61.99 ea 66511 small block, 8" dia. ................... 69.99 ea External Balance66513 400ci, 8" dia. ............................. 74.99 ea

1977-85 Chrome Crankshaft PulleysDress up your engine with a chrome crankshaft pulley from Classic Industries. These beautiful chrome aftermarket pulleys are manufactured with great attention to detail and are highly polished for a show quality shine. Applications are available for small block Chevrolet engines with long water pump. Single Groove Crankshaft PulleyT9606 1977-85 6.9" dia. ................... 34.99 ea Double Groove Crankshaft PulleyT9607 1977-85 6.9" dia. ................... 64.99 ea Triple Groove Crankshaft PulleyT9608 1977-85 7.8" dia. ................... 69.99 ea

T9606

Warning Concerning Crankshaft Pulleys Stock replacement, aftermarket stamped steel or cast iron pulleys are not designed to exceed 400 horsepower or 6000 RPM. Using reproduction pulleys on engines in excess of these limits may result in catastophic disintegration of the pulley causing severe damage to the engine, cooling system and body parts. Classic Industries® assumes no liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding the recommended RPM limitations.

1977-02 GM Crankshaft PulleysReplace the damaged or missing original crankshaft pulley on your small block Chevy engine with a Genuine GM service part.Triple Groove Crankshaft PulleyG7193 1977-86 small block ................ 47.99 ea Serpentine Belt PulleyG3567 1987-92 w/o turbo ............... 59.99 ea G3567 1993-95 3.4-L .................... 59.99 ea G3878 1995-96 3.8-L w/MT .......... 232.99 ea G3878 1995-97 3.8-L w/AT ............ 232.99 ea G3569 1988-92 V8 w/serp belt ...... 41.99 ea G3887 1993-97 V8 ......................... 277.99 ea G3888 1998-02 V8 ......................... 73.99 ea

G7193

1969-86 Reproduction Crankshaft PulleysReplace the damaged or missing original crankshaft pulley on your small block or Pontiac engine with one of our fi ne reproductions. Our reproduction pulleys are manufactured with great attention to detail and feature correct markings as original. Applications are available for small block Chevy and Pontiac engines.Note: *Except 63A or 80A alternator. K1055 is a reconditioned GM pulley.

Chevrolet EnginesDouble Groove w/o AC, 6-7/8" DiameterK1055 1976-78 305, 350-L, .......... 94.99 ea K1055* 1979 305, 350-L ........... 94.99 ea K1055 1981 267, 305-H, ......... 94.99 ea K1055 1982-85 305-H w/42A alt. . 94.99 ea Triple Groove w/AC, 7-11/16" Diameter3972180 1977-86 ............................. 79.99 ea

Pontiac V8 EnginesSingle Groove w/o AC/PS, 7-1/4" DiameterGM# 9790947YD F12364 1969-70 exc. RA5 ............. 74.99 ea Single Groove w/AC 7-1/16" DiameterGM# 480509XS A8700120 1970-75 ............................. 39.99 ea Double Groove w/o AC w/PS, 7-1/4" DiameterGM# 9790846YA A8700121 1968-70 350-400 ............... 59.99 ea Double Groove w/AC, 7-3/16" DiameterGM# 480508XR A8700122 1970 ............................. 69.99 ea

A8700170

bluechrome

1985-97 JET Underdrive Pulley Set The JET Underdrive Pulley Set reclaims lost horsepower and mileage by reducing the drag placed on the engine to drive the accessories such as the air conditioning, power steering and water pump. Kits include pulleys, hardware, complete instructions and part number for new serpentine belt (most kits will require use of smaller size belt). Important: Belt is not included with kit. Number and type of pulleys will vary per application. Note:* Includes 2 pulleys. JT90106* 1985-87 350 TPI .................. 159.99 set JT90108* 1985-95 3.4L ...................... 129.99 set JT90107* 1988-92 350 TPI .................. 169.99 set JT90140* 1993-97 350 LT1 ................. 304.99 set

JT90140

En

gin

es &

Co

mp

on

en

ts

428

KK

Toll Free Order Line 800.854.1280Chevy Engine Timing Components

1969-79 Pontiac Timing CoverReproduction of the timing cover which will replace the original cover for the applications below. These cast aluminum covers are what the factory designed to cover the timing chain. The water pump is also connected to the front of this unit. N538 1969-74 V8 w/o 307 ............ 189.99 ea N538 1975 V8 w/cast mark ..... 189.99 ea N538 1976-77 350P, 400, 455 ....... 189.99 ea N538 1978-79 400 WC, X7........... 189.99 ea

1985-02 Timing CoverCorrect replacement for the original front crankcase cover. Be sure to replace the cover gasket when purchasing the timing cover.G5742 1985-86 5.0-F ...................... 53.99 ea G5742 1987-92 V8 .......................... 53.99 ea G12914 1998-02 5.7L, LS1 & LS6 ... 99.99 ea

1977-80 Timing Chain and Gear SetsA complete, single-row, link-type timing chain and gear set to fully replace your originals. Includes a new timing chain, camshaft gear and crankshaft gear.TC499S 1977-80 Chevy small block . 19.99 set

G8325

1977-02 Chevrolet Timing ChainsWhen it comes to quality, you can’t beat genuine GM parts. The timing chains offered here are original GM all the way! If you’re restoring a Firebird, or simply need to replace your timing chain, make sure the replacement is manufactured with the quality your Firebird deserves. These timing chain listings are for Chevrolet engines that were factory installed in Firebird models, or replacement engines of the same designation.Chevy EnginesG8325 1980 229 V6 ..................... 68.99 ea G8325 1977-81 267, 305, 350-L ....... 68.99 ea G8325 1982 305-H, 5.0-7 ............ 68.99 ea G8325 1983 5.0-S, 305-H ............ 68.99 ea G8325 1984 305-G, 305-H .......... 68.99 ea G8325 1985-86 305-G, 305-H, 5.0-F 68.99 ea G8325 1987 305-H, 5.0-F, 5.7-8 .. 68.99 ea G8325 1988-92 5.0-E, 5.0-F, 5.7-8 ... 68.99 ea LT1 ChevyG8327 1993-97 5.7-P ........................ 53.99 ea LS1 Chevy G8327 1998-02 5.7-G ........................ 53.99 ea

1977-86 Aluminum Timing CoversEdelbrock die-cast polished timing covers come with pan seal, allen head bolts, gaskets, and washers. These timing covers are a great way to dress up any Chevy engine. Complete the look with Edelbrock valve covers, and air cleaners. Note: No further discounts apply.

E4240 1977-86 Chevy small block ... 89.99 ea

E4240

1977-92 GM Crankshaft Timing GearGenuine GM crankshaft timing gears. Get it right the fi rst time when rebuilding your existing engine or replacing damaged originals with these high quality crankshaft timing gears.18-Tooth Small Block Chevy Timing GearsG8318 1977-86 350 ........................... 48.99 ea G8318 1977-81 305 ........................... 48.99 ea G8318 1990-92 350HO, ZZ1 2nd des 48.99 ea

1977-92 GM Camshaft Timing GearsOEM factory small block Chevy replacement camshaft timing gears. Excellent GM replacements for use when rebuilding an existing engine or replacing a broken original!36-Tooth Iron Camshaft Timing GearsG8314 1977-86 350 - early link ........ 71.99 ea G8314 1977-81 305h ......................... 71.99 ea 38-Tooth Iron Camshaft Timing GearsG8317 1990-92 350HO ZZ1 2nd des 78.99 ea

G8314

Engine Timing Components 1977-95 Accu-Drive®

Camshaft Gear DrivesThe Accu-Drive® camshaft gear drive kit replaces a stock timing chain with a precision gear drive system. The gear drive can be easily installed. Just replace the stock crank and camshaft sprockets with Accu-Drive® gears and slip in the idler assembly. Most Accu-drives require no modifi cations to the engine block, although some fi tting of the axles and front cover may be required. The Accu-Drive® gear system transmits power from the crankshaft gear to a full fl oating main idler gear which drives the camshaft gear. A unique feature of the Edelbrock Accu-Drive® system is the ability of the main idler gear to fl oat to an optimum position between the crankshaft and camshaft gears. Important: Not for use on stock Chevy hydraulic roller-lifter cam equipped engines. Accu-Drive® gears are not recommended for use above 7000 RPM or on computer controlled vehicles with knock sensors. On some late model small block engines, it will be necessary to check clearance behind the cam gear at the engine block at the 12 o’clock position. Make sure gear clears oil galley bosses on block when in the most rearward position. Grind or machine block for clearance. Note: No further discounts apply.

E7890 1977-95 Chevy small block .. 191.99 set

1977-86 SB Chevy Timing CoverThe sturdy two piece billet timing cover allows the camshaft to be serviced without disturbing the oil pan seal. The cover is machined from high grade billet aluminum and is compatible with almost all water pumps and gear drives. Includes roller cam button, cam plate, shims, a timing pointer, hardware and instructions.Note: No further discounts apply. 21101 1977-86 SB timing cover set .. 269.99 set

Small Block Chevy Timing Belt SystemGet more performance out of your small block with these Magnum timing belt systems! These systems absorb crankshaft harmonics. The Magnum belt drive system is ideal for street performance and budget-minded race applications. Note: Minor block modifi cation may be required. No further discounts apply.

Dry Timing Belt SystemThis system is more durable and more accurate than traditional timing chains or aftermarket gear drive systems, especially at high RPM. Make quick timing modifi cations at the track without the hassle of removing a timing chain cover! Includes main plate, gears, belt, shims, mounting hardware, and instructions. 61100 dry timing belt system ............ 574.99 set 61100B replacement timing belt .......... 59.99 set

Wet Timing Belt SystemThis system keeps the timing accurate with virtually no fl uctuation. It is also more durable than traditional timing chains or aftermarket gear drive systems, especially at high RPM. Designed to work with billet timing cover #21101 but works with most late model fl at covers. Includes upper and lower timing gears, belt, cam timing bushings, shims, cam button, mounting hardware and instructions. 51100 wet timing belt system ........... 409.99 set 51100B replacement timing belt .......... 74.99 ea

51100

G5742

KK

En

gin

es &

Co

mp

on

en

ts

429Timing Components

Timing Cover Bolt SetsARP’s timing cover bolts are available in both polished stainless steel or black oxide fi nish chrome moly. You can choose between standard hex head bolts or compact 12-point fasteners.Chevrolet EngineAR2152 black oxide hex head ............ 11.99 set AR2151 black oxide 12-point ............ 11.99 set AR4152 stainless hex head ............ 18.99 set AR4151 stainless 12-point ............ 18.99 set Pontiac EngineAR19152 black oxide hex head ............ 29.99 set AR19151 black oxide 12-point ............ 29.99 set AR49152 stainless hex head ............ 51.99 set AR49151 stainless 12-point ............ 54.99 set

1977-82 OE Style Reproduction Timing TabsHelp to keep your engines timing at the correct mark by utilizing these reproductions of the original timing tabs. For Chevrolet small block applications. Reproduction1256653 1977-80 8" balancer .............. 9.99 ea 1256654 1977-82 350 w/o hi perf. ....... 8.99 ea GMG8332 1977-82 350 w/o hi perf. ....... 5.99 ea

Chrome Timing TabsOffi cially licensed chrome timing tabs for use on Chevrolet small block applications. D141202 small block w/8" balancer .... 5.99 ea

Chrome Timing TabsThese aftermarket tabs are a great replacement because they’re chrome! Install timing tabs and add detail to your restoration. For Chevrolet small block applications. T4960 small block 6"-7"-8" ................. 4.99 ea T9178 small block w/pointer 7" .......... 7.99 ea T9179 small block w/pointer 8" .......... 7.99 ea

T9178T4960

1978-97 Timing Cover Bolt SetsDress up your Firebird with these one-of-a kind dress-up bolt sets. The Pontiac Arrowhead, GT or fl ames logo is stamped directly onto the head of the bolts. They are available in decorative chrome plated or polished stainless steel versions. What better way to make a statement than with these unique bolts? Note: Must specify logo prefi x A-Arrowhead, B-GT logo, C-Flames.Chrome56464C 1978-87 Chevy small block ... 19.99 set 56400C 1993-97 LT-1 ........................ 19.99 set Stainless Steel56464S 1978-87 Chevy small block ... 9.99 set 56400S 1993-97 LT-1 ........................ 19.99 set

C- Flames B- GT logoA- Arrowhead

1969-79 Timing Cover Alignment SleevesReproduction of the original timimg chain cover sleeves for use on 1969-79 Pontiac models. These sleeves are used to align the timing chain cover to block positioning and crankshaft seal alignment.F190 1969-79 .................................... 7.99 pr

Timing Cover Gasket SetsCorrect replacements for 305-350 small block Chevrolet applications. Sets include the timing cover seals T4364 Chevy small block .................. 9.99 set

Timing Components

1989-02 Camshaft Gear Dowel PinFactory original replacement camshaft gear dowel pin. Fits 1989-02 5.0-5.7 liter engines.G8323 1989-92 5.0-E, 5.0-F, 5.7-8 ....... 4.99 ea G8323 1993-97 5.7-P ............................ 4.99 ea G8323 1998-02 5.7-G ........................... 4.99 ea

1987-97 Camshaft Gear BoltFactory original replacement camshaft gear bolt.5/16"-18 x 3/4"G8324 1987 305-H, 5.0-F (export)... 2.99 ea G8324 1990-92 5.0-F, 5.7-8 ................... 2.99 ea G8324 1993-97 5.7-P ............................. 2.99 ea

1977-79 Trans Am Engine Oil SlingerReproduction timing chain gear oil slinger for the 1977-79 Trans Am's Oldsmobile 403 engine.TA4004 1977-79 Olds 403 .................. 21.99 ea

1977-79 Trans Am Timing Chain Cover BoltOldsmobile 403 engine water pump and timing chain cover bolt set. Used to hold on the timing chain cover, water pump and timing mark bracket.TA4009 1977-79 Olds 403 .................. 27.99 set

1977-79 Trans Am Timing Mark BracketEngine crank timing mark bracket for 1977-79 Pontiac Trans Am models with 403ci Oldsmobile V8 engine. Features all correct mounting points as original.TA4010 1977-79 ................................... 16.99 ea

12566541256653

1964-79 Timing Cover Lock And BoltThis fastener set connects the intake manifold to the timing chain cover on 1964-79 Pontiac V8 engines. These bolts feature correct markings and black zinc fi nish on the bolt and include special lock washer with the correct silver zinc fi nish. A8700173 1964-79 ................................ 7.99 set

1964-79 Timing Chain Cover BoltsCorrect timing chain fasteners for 1964-79 Pontiac engines. Bolts feature correct markings and fi nish and include washers. Stud sets include washers and nuts. A8700174 1964-79 upper bolts ....... 11.99 set A8700175 1964-79 lower bolts ....... 11.99 set A8700176 1967-79 studs ................. 14.99 set

A8700174

AR4151

En

gin

es &

Co

mp

on

en

ts

430

KK


1969 Firebird Ram Air SystemCorrect reproduction Ram Air induction system for 1969 Firebird models. This 18-piece kit includes the major components required to install a Ram Air system on models with Firebird 400 hood.Note: Will not fi t Trans Am models.

A8700138 1969 Ram Air system ..... 1964.99 kit

1969-75 Ram Air Pan Actuator AssemblyReproduction of the Ram Air actuator assemblies for use on models with Ram Air. These actuators rivet to the underside of the Ram Air pan and vacuum lines attach close to eliminate outside air to the carburetor.Complete AssemblyF12349 1969 LH ............................ 112.99 ea F12350 1969 RH ............................ 112.99 ea Diaphragm and BracketF12325 1969 T/A w/Ram Air ......... 23.99 ea F12325 1970-75 Formula air cleaners . 23.99 ea

F12349

1967-69 Ram Air Hood PanReproduction of the Ram Air hood pan for 1969 Firebird models. This pan is manufactured from E-coated die stamped steel or fi berglass. This pan mounts to the hood. For models with Ram AirSteelF12336 1967-68 ................................ 279.99 ea F12337 1969 upper ....................... 493.99 ea F12345 1969 lower ....................... 349.99 ea FiberglassEB6533 1967-68 ................................ 201.99 ea EB6534 1969 upper ....................... 201.99 ea

1967-69 Hood Pan SealsCorrect reproduction seals which seal the Ram Air system. For use on 1967-69 models with Ram Air.Upper RubberF12338 1967-68 .................................. 66.99 ea F12348 1969 ........................................ 62.99 ea Lower FoamF12339 1967-68 .................................. 44.99 ea F12340 1969 ........................................ 66.99 ea

Shaker Hood/Ram Air Parts


1967-68 Ram Air Carburetor PanReplacement of the Ram Air Carburetor Pan. Originally installed on 1967-68 Firebird models with Ram Air.Available with either an E-coated die stamped steel or fi berglass baseSteelF12344 base only ............................... 275.99 ea FiberglassEB6853 base and lid ........................... 219.99 set

F12348

• Upper Ram Air Pan• Pan Heat Actuators• Ram Air Flapper Door• Upper Cable• Connector Block• Connector Bracket• Lower Cable & Knob• Lower Cable Bracket

• Cable Bracket Decal• Die Cast Hood Scoops• Foam Pan Seals• Lower Air Pan• Spark Arrestor Screen• Filter Retaining Ring• Air Filter• Pan Stud kit

1969 Trans Am Ram Air SystemInstall a Ram Air system on your 1969 Trans Am! This was a rare option for Trans Am and parts were almost impossible to fi nd, until now. This kit includes the major components required to install the rare Trans Am Ram Air system on your vehicle.

A8700139 1969 TA Ram Air System 1424.99 ea

• Upper Ram Air Pan• Pan Heat Actuators• Lower Carburetor Pan• Upper Foam Seal Upper Carburetor Pan Foam Seal

• Upper Pan Filter Retaining Ring• Air Filter• Spark Arrestor Screen• Pan Stud Kit

1967-68 Firebird Ram Air SystemCorrect reproduction of the factory Ram Air induction system. This six piece kit includes the major components needed to install a Ram Air system on 1967-68 models with a Ram Air Firebird 400 hood.

A8700137 1967-68 Ram Air system ... 839.99 kit

• Upper Hood Pan• Lower Carburetor Pan• Die Cast Ram Air Scoops

• Upper Foam Seal• Lower Foam Seal• Air Cleaner Lid

A8700137

F12336F12345

EB6853

1970-81 Shaker Flap SealReproduction shaker fl ap seal for 1970-81 models. This rubber item seals the fl ap on the shaker hood scoop. Designed to replace the original exactly.E201 1970-81 scoop edge ............... 6.99 ea

1977-81 T/A Shaker Hood Scoop/BaseReproduction hood scoop and base for 1977-81 Pontiac Trans Am models with the optional Shaker intake. The scoop is manufactured from fi berglass, as original, while the base is manufactured from steel. Will work with 301, 400 and 403 Pontiac engines. Bases include attaching ring. Scoop to hood seal sold separately.F10191 1977-81 scoop ...................... 199.99 ea F10192 1977-81 301 base ................. 99.99 ea F10193 1977-81 400 base ................. 99.99 ea F10194 1977-81 403 base ................. 99.99 ea F10195 1977-81 scoop & 301 base .. 269.99 set F10196 1977-81 scoop & 400 base .. 269.99 set F10197 1977-81 scoop & 403 base .. 269.99 set

F10191

1970-76 T/A Shaker Hood ScoopReproduction hood scoop assembly for 1970-76 Pontiac Trans Am models with the optional Shaker intake. Manufactured from fi berglass as original and includes the fl apper and all necessary components for a functional Shaker system. F10198 1970-76 complete ............... 299.99 ea

1973-81 Functional Shaker ConversionFunctional shaker hood scoops were only available on 1970-72 Trans Am models. These highly desirable scoops open to allow air in for improved performance, and close to keep the outside elements out. This is an easy do-it-yourself conversion kit that wires directly to your fuse box so the fl ap opens when the engine is started. The 1973-76 shaker kit closely resembles the early 1970-72 factory components. Actual hood scoop not included with kit. Note: Please provide year and engine size when ordering. (Pontiac 400, Olds 403, 4.9 or 5.0). Some of the 4.9 shakers may need additional modifi cation for this kit to fi t. All 1973 and 1974 Trans Ams with TH400 trans do not need the kickdown switches. To ensure correctness for 1977, measure hood scoop from top to base, 3"-short or 3.5"-tall. * tall scoop, ** short scoop.Standard Kit (w/o throttle switch)PP100 1973-76 400/455 Pontiac ...... 169.99 ea PP101** 1977 400 Pontiac ............. 169.99 ea PP102** 1977 403 Olds ................. 169.99 ea PP103* 1977-81 400 Pontiac ............. 169.99 ea PP104* 1977-81 403 Olds ................. 169.99 ea PP105* 1977-81 4.9 Pontiac .............. 169.99 ea PP106* 1977-81 5.0 Chevrolet .......... 169.99 ea

PP100

F12325

underside

KK

En

gin

es &

Co

mp

on

en

ts

431

1967-69 Ram Air Pan Air FilterReplacement air fi lter for use on 1967-69 models with Ram Air. This is the correct size air fi lter that fi ts in the Ram Air pan.F12341 1967-69 lower ..................... 13.99 ea F12342 1967-69 upper ..................... 23.99 ea

1969 Trans Am Ram Air Hood TubesReproduction of the Ram Air hood tubes for use on 1969 Trans Am models with Ram Air. These tubes mount on the underside of the hood and go from the Ram Air scoops to the Ram Air pan which direct air into the lower pan.Note: *Does not fi t reproduction hoods.F12343 1969 Ram Air hood tubes .... 166.99 pr EB6540* 1969 RH heavy duty ............ 197.99 ea

F12352

F12343

1969 Ram Air CablesReproduction of the upper Ram Air cable for use on 1969 models with 400 hood. The upper cable goes from the fl apper door to the Ram Air pans. The lower cable goes from the Ram Air pan to the inside of the car and connects to to the cable support bracket and features a chrome knob.F12351 1969 upper ........................ 36.99 ea F12352 1969 lower ........................ 41.99 ea

1969 Cable Connector BlockReplace your missing or damaged connector block with this quality reproduction. This block connects the upper and lower Ram Air cables together. Works on 400 hoods with Ram Air I.F12353 1969 connector block ....... 15.99 ea

1969 Cable Connector BracketThis bracket connects the upper and lower cables together in the Ram Air pan. Works on 400 hoods with Ram Air I.F12354 1969......................................... 15.99 ea

1976-79 Shaker Scoop Retainer RingRing that secures the shaker scoop to the air cleaner assembly. This reproduction ring will replace the original exactly. For use on all 1976-79 models with shaker hoods. 10004184 1976-79 ............................. 39.99 ea

1977-81 Shaker Scoop to Hood SealCorrect reproduction rubber seal which seals the scoop to the underside of the hood. Comes complete with attaching clips.10012875 1977-81 scoop to hood ......... 39.99 ea

1969 Inner Cable Support BracketThis bracket mounts to the lower dash and positions the cable in location to actuate Ram Air. Works on 400 hoods with Ram Air I.F12355 1969 support bracket ........ 74.99 ea

1969 Ram Air DecalThis decal is located under the dash and mounts to the inner cable support bracket.F12356 1969 Ram Air decal .......... 4.99 ea

1969 Upper Air Filter Retaining RingReproduction of the upper air fi lter retaining ring for use on 1969 models with Ram Air. Most people don’t realize the air fi lter mounts up in the hood pan. This is the retaining ring that screws the upper pan to hold the air fi lter up to the pan.F12346 1969......................................... 42.99 ea



F12342

1970-75 Ram Air Rubber BootsThese are correct reproductions of the rubber boots that go from the air cleaner to the hood on all 1970-75 Formula Firebird models with Ram Air. The boots were retained to the underside of the hood with a specialized retainer plate. One pair of each required per vehicle.FL120 1970-75 rubber boots ........... 64.99 pr F70765 1970-75 retainer ................... 29.99 ea

1969 Spark Arrestor ScreenCorrect fl ame spark arrestor for 1969 Firebird and Trans Am models equipped with Ram Air III or Ram Air IV. Sits on top of the carburetor to keep debris out of the carb when the hood is up, and help prevent an underhood fi re in the event of a backfi re.F12394 1969 ...................................... 84.99 ea

1970-72 Shaker Scoop Throttle SolenoidCorrect reproduction of the original shaker scoop solenoid assembly which allows the hood valve assembly to open and shut when the accelerator is depressed. C685 1970-72 ................................... 38.99 ea

1977-81 T/A Shaker Scoop Drain HoseReproduction hood scoop drain hose for 1977-81 Pontiac Trans Am models with the optional Shaker hood intake. Manufactured with correct molded bends as original, this hose runs from the base of the scoop down in front of the water pump to drain moisture. Hose clamp included. 15241 1977-81 ................................... 14.99 ea

FL120 F70765

1970-72 Trans Am Throttle SwitchReproduction throttle switch assembly for 1970-72 Trans Am models. The throttle switch assembly mounts on the carburetor. It signals the fl apper door on the Trans Am scoop to open and close.KW176 1970-72 switch only ............ 21.99 ea K7970 1970-72 switch w/brackets .. 104.99 ea A9700101 1970-72 switch retainer ....... 3.99 ea

K7970

En

gin

es &

Co

mp

on

en

ts

432

KK


Replacement Air Cleaners

1970-75 Formula Dual Snorkel Air CleanerThis quality reproduction dual snorkel air cleaner is just what you need to bring your 1970-75 Formula engine compartment back to its original appearance. This air cleaner housing is designed to function with all 1970-75 Formula dual scoop hoods. F70752 1970-75 Formula ................. 429.99 ea CB1007 1970-75 rubber seal ............. 14.99 ea


1970 Ram Air III Air CleanerReproduction single snorkel air cleaner for 1970 Trans Am with Ram Air III 400 engine. A one year only air cleaner set up to accept the functional hood scoop. Features correct domed air cleaner lid. Air fi lter element is not included.F12378 1970 Ram Air III .............. 317.99 ea

1970-73 Ram Air III Air CleanerReproduction dual snorkel air cleaner with one heat stove diaphragm valve for 1970-73 Trans Am with Ram Air III, HO 400 or 455 engine. Features correct domed air cleaner lid. Air fi lter element is not included.F12379 1970-73 Ram Air III .......... 317.99 ea F12379 1970-73 HO 400/455 ......... 317.99 ea

1970-73 Ram Air IV Air CleanerReproduction dual snorkel air cleaner with one heat stove diaphragm valve for 1970-73 Trans Am with Ram Air IV, HO 400 or 455 engine. Features correct domed air cleaner lid. Air fi lter element is not included.F12380 1970-73 Ram Air IV ............... 317.99 ea F12380 1970-73 HO 400/455 .............. 317.99 ea

1967-74 Dual Snorkel Air Cleaner LidA reproduction of the hard to fi nd 17" 4 bbl. dual snorkel air cleaner lid in chrome or black fi nish. Each lid is manufactured using the correct confi guration for a show quality appearance! These lids are sure to please even the most discriminating restorer or show judge! This lid also includes a correct lid to base rubber seal which is pre-attached to the lid. KW462 1967-74 black ........................ 42.99 ea KW461 1967-74 chrome ..................... 54.99 ea

KW462

F70752

KW461

1970-76 Shaker Air Cleaner Lid Reproduction "Shaker" domed air cleaner lid for 1970-76 Pontiac Trans-Am models. Features correct dome. Filter element not included and sold separately.F12386 1970-76 14" dia ..................... 43.99 ea

Chrome Air CleanerReplacement air cleaner including chrome lid. This 9" air cleaner fi ts all with 5-1/8" necks. For 4-7/32" necks must use 66315 adapter. 66815 9" dia ........................................ 14.99 ea 66315 4-7/32" neck adapter ................ 7.99 ea

66801 66802

Low Profi le Chrome Air CleanerAftermarket replacement air cleaner designed for anyone who wants a low profi le appearance. Includes a triple chrome plated lid. Open element style air cleaner. 66804 14" dia, fi ts 5-1/8" neck ............ 34.99 ea

Deluxe Chrome Tri-Star Air CleanersEach air cleaner is open element style and includes a tri-star wing nut on top. Available in 4 separate sizes. Includes quality chrome plating for an authentic appearance and long lasting dependability. Air Cleaner for 5-1/8" and 4-7/32" Necks66801 14" dia, w/Tri-star nut .............. 29.99 ea 66802 10" dia, w/Tri-star nut .............. 19.99 ea 66803 6-3/8" dia, w/Tri-star nut .......... 16.99 ea Air Cleaner for 2", 2-5/16" and 2-5/8" Necks66816 4" dia, w/Tri-star nut ................ 14.99 ea ElementT2110 element for 66801 .................... 10.99 ea

1967-81 Open Element Air CleanerReplacement 6" tall air cleaner assembly which includes the base, element, and chrome plated lid. Excellent replacement for open element type air cleaner. Includes knockout provided for smog tube. Great inexpensive replacement with super looks! Although this air cleaner is not original, it gives a custom look many enthusiasts desire. Note: Fits 5-1/8" neck. This air cleaner assembly is not for use with Ram-Air.T2286 1967-81 14" dia ..................... 44.99 ea T2287 1967-81 14" x 6" element ...... 18.99 ea

T2286

1967 Chrome Louvered Air CleanerThis style of air cleaner was part of the chrome dress option for 1967 Firebird 400 models. These assemblies include a low profi le chrome louvered lid, a pancake style fi lter element, and a baseplate. Available for both Quadrajet and AFB carburetor models. Lids and baseplates are also available separately.Note: *Will not work with Edelbrock carburetors.Assemblies PY4201 * 1967 AFB assembly ............. 174.99 ea PY4202 1967 Quadrajet assembly ..... 174.99 ea Individual Components PY4213 1967 louvered lid ................. 109.99 ea PY4214 * 1967 AFB baseplate ............. 59.99 ea PY4215 1967 Quadrajet baseplate ..... 59.99 ea

PY4202

KK

En

gin

es &

Co

mp

on

en

ts

433



Super-Light 14" Air CleanersSave critical front-end pounds! In a black or clear anodized fi nish, plus a 3" tall genuine AC fi lter, a color-matched, super-deep aluminum base for maximum hood clearance when using optional, extra-tall air fi lter elements. Supplied with necessary mounting hardware and center nuts. 141690 black aluminum ........................ 69.99 ea 141691 clear anodized aluminum ......... 69.99 ea

E4117

E41173

Edelbrock Classic Series Air CleanersAvailable in either classic polished aluminum or durable black powder coat fi nish and includes a 3" medical grade, pre-oiled cotton gauze element for excellent fi ltration. These air cleaners work with all popular 5-1/8" necks, for all carburetors or throttle bodies. Overall height is 3.9".Note: No further discounts apply.

E4117 polished fi nished .................... 199.99 ea E41173 black fi nish ............................. 144.99 ea

Full Sized Street ScoopsThese full sized aluminum street scoops add an aggressive performance look to any custom street or show car engine. These fi nned and polished scoops measure 20" long by 5" tall and are available for both dual or single quad applications, fi tting carburetors with a 5-1/8" neck. Scoops include all necessary mounting hardware and 6-3/8" x 2-1/2" paper element air fi lters. 52351 single quad scoop ................... 168.99 ea 52331 dual quad scoop ...................... 163.99 ea

52331

Mini Street ScoopsGive any engine the look of sheer horsepower with these beautiful aluminum mini street scoops. Designed for single quad carburetors with a 5-1/8" neck. These aluminum scoops measure 13-1/2" long and 4-1/2" tall, and are available with fi nned or smooth polished fi nishes. Ready to bolt on with all necessary hardware and a 6-3/8" x 2-1/2" paper element air fi lter. 52451 smooth scoop ......................... 114.99 ea 52461 fi nned scoop .......................... 124.99 ea

52451

52461

Aluminum Street ScoopsThese aluminum street scoops add an old-school performance look to almost any engine, especially if it has a tunnel ram or dual carburetors. Each 20" scoop is made from polished cast aluminum with three fully-functional reversible round butterfl ies. Designed for carburetors with a 5-1/8" neck and comes with both dual and single carburetor mounting plates, 6-3/8" x 2-1/2" paper element air fi lters, hardware and instructions. 53391 smooth housing scoop ............ 263.99 set 52391 ribbed housing scoop ............. 257.99 set

53391

52391

Streamline Series Air CleanersThese billet aluminum air cleaners are machined for style, featuring a mirror polished billet strip on top with integrated wing nut. Designed to fi t standard four barrel carburetors, each air cleaner includes stainless steel hardware and detailed instructions. Choose from three designs, available in your choice of satin black powder coat or bead blasted and ready for paint. Made in USA.Note: Not for use with Dominator carburetors. No further discounts apply.

Ready To Finish 158241 14" air cleaner ........................ 249.99 ea 154241 large oval air cleaner .............. 199.99 ea 153241 small oval air cleaner ............. 179.99 ea Black 158240 14" round air cleaner .............. 249.99 ea 154240 large oval air cleaner .............. 199.99 ea 153240 small oval air cleaner ............. 179.99 ea

158240

158241

154240

154241

153241

153240

Ribbed Billet Air CleanersThese precision machined air cleaners are a product of progression and styling. Manufactured from machined billet aluminum with a mirror polished fi nish, each air cleaner includes a K&N fi lter, stainless steel mounting hardware and detailed instructions. Available in a 14" round version or a dual quad confi guration with adjustable base plate to allow for variations in carburetor spacing. Made in USA.Note: Not for use with Dominatorcarburetors. No further discounts apply. 215840 14" dia round air cleaner ........ 649.99 ea 215650 oval dual quad air cleaner ...... 279.99 ea

215650

215840

Signature Series Air CleanersTop off your engine with a good looking Pro-Flo air cleaner. The Edelbrock signature and styling coordinate beautifully with Edelbrock Signature Series valve covers. These air cleaners are stamped from 18 gauge steel and triple chrome plated for a high quality fi nish and good looks. They’ll work with all popular 5-1/8" diameter carburetor necks. Important: Use E1121 with all Edelbrock square bore carburetors and Q-jets.Note: No further discounts apply.

Round 14" diameter w/3" elementE1207 chrome w/logo ........................... 29.99 ea E1121 chrome w/logo, low profi le ........ 31.99 ea E1223 black w/logo, low profi le ........... 31.99 ea Round 10" diameter w/2" elementE1208 chrome with logo ....................... 21.99 ea E1203 black powder coat w/logo .......... 24.99 ea Round 6" diameter w/2" elementE1209 chrome with logo ....................... 29.99 ea Triangular w/2-1/2" washable elementE1222 chrome with logo ....................... 99.99 ea

E1223E1207

141690

141691

En

gin

es &

Co

mp

on

en

ts

434

KK


PERFORMANCE FILTERS

Air Filter Sealing GreaseK&N Air Filter Sealing Grease seals the air cleaner assembly, eliminating the possibility of dirt, dust and other particles from entering your carburetor from between the air fi lter element and air cleaner assembly. This is especially important if you will be operating your vehicle off road or in extremely dusty conditions such as construction sites, etc. K&N Air Filter Sealing Grease resists heat and will not melt or run off. 990704 6 ounce tube ............................. 11.99 ea

K&N Performance Filters

K&N 11" Stainless Steel Air CleanerThis air cleaner is perfect when high performance is desired but space is at a premium. 5-1/8" fl ange fi ts all popular 4-barrel carburetors. Your choice of 4 element heights are offered to fi t a wide variety of applications. 3/4" vent kit is included. Total height listed below is the minimum clearance needed above the carburetor fl ange. Top is made of long lasting polished stainless steel while bottom is an attractive chrome fi nish. 11" Diameter Complete Assembly, with Vent Kit601170 2-1/8" element, 3.12" total ht . 129.99 ea 601180 3-1/2" element, 4.75" total ht . 109.99 ea 601200 5" element, 6.00" total ht ....... 119.99 ea 601210 6" element 7.00" total ht ........ 119.99 ea

K&N 14" Triangular Chrome Air CleanerBreathe a little life into your engine compartment! This triangular air cleaner will set your underhood area apart from the norm. The 5-1/8" fl ange fi ts all popular 4-barrel carburetors. Element height is 3" while 3.62" is the minimum clearance needed above the carburetor fl ange.14" Triangular Complete Assembly, with Vent Kit601470 3" element, 3.62" total ht ....... 124.99 ea

K&N 14" Low Profi le Chrome Air CleanerThis air cleaner provides a low profi le fi t by dropping the fi lter 7/8" or 1-1/4" below the carburetor fl ange. 5-1/8" fl ange fi ts all popular 4-barrel carburetors. Your choice of 4 element heights are offered to fi t a wide variety of applications. Note that the 7/8" drop will fi t carburetors with electric choke mechanisms. Optional vent kit, item # 851190 is available and sold separately. Total height listed below is the minimum clearance needed above the carburetor fl ange. Important: *Items marked with asterisk will not fi t Edelbrock carbs with electric choke.7/8" Drop Complete Assembly, without Vent Kit601430 3" element, 3.12" total ht ....... 109.99 ea 601440 4" element, 4.12" total ht ....... 114.99 ea 601450 5" element, 5.12" total ht ....... 119.99 ea 601460 6" element, 6.12" total ht ....... 124.99 ea 1-1/4" Drop Complete Assembly, without Vent Kit601280 3" element, 2.75" total ht ....... 99.99 ea 601290 4" element, 3.75" total ht ....... 124.99 ea 601300* 5" element, 4.75" total ht ....... 119.99 ea 601310* 6" element, 5.75" total ht ....... 119.99 ea

K&N Air Filter Oil & Clean/Degreaser Kit!K&N Air Filter Oil and Cleaner/Degreaser is the only oil and cleaner/degreaser specially formulated to work in combination with the cotton fabric in the K&N fi lter. The use of any other could void the fi lter’s warranty and potentially harm the air fi lter’s cotton material. The cleaner/degreaser works to dissolve the dirt build up and old oil fi lter oil and can be washed away with water. It is environmentally friendly, and when used as directed, is safe on paint, chrome, cast aluminum, plastic, rubber and vinyl. Each kit includes oil, cleaner/degreaser, and service decal. Your choice of 6-1/2 oz. aerosol spray or 8 oz. squeeze oil bottle is offered.995000 kit w/6-1/2 oz. aerosol oil ....... 14.99 set 995050 kit with 8 oz. squeeze oil ...... 9.99 set

14" Raised Profi le Chrome Air CleanerThis air cleaner raises the element 9/16" above the carburetor fl ange. 5-1/8" fl ange fi ts all popular 4- barrel carburetors. Your choice of 4 element heights are offered to fi t a wide variety of applications. Will clear HEI distributors. Vent kit is included. Total height listed below is the minimum clearance needed above the carburetor fl ange. 9/16" Raised Profi le Complete Assembly, w/vent kit601263 2-1/4" element, 3.87" total ht . 114.99 ea 601264 3" element, 4.62" total ht ....... 104.99 ea 601260 4" element, 5.62" total ht ....... 134.99 ea 601270 5" element, 6.62" total ht ....... 139.99 ea

Custom Air Cleaner AssembliesYou’ve got billet spokes on your wheels, now get precision machined billet spokes in your engine compartment! K&N, renowned for superior performance, durability, and styling in their fi lters, combines serious air fl ow with gorgeous looks in these round, 14" billet aluminum air cleaners with either a 5 spoke or 10 spoke lid. Both styles include a carbon fi ber insert and a 3" tall K&N element. They are designed to fi t 5-1/8" carburetor fl anges, and are available with either a 1-1/4" drop base or a standard 9/16" raised base.13971 5 spoke w/1-1/4" drop base .... 261.99 ea 13972 5 spoke w/9/16" raised base ... 261.99 ea 13973 10 spoke w/1-1/4" drop base .... 261.99 ea 13974 10 spoke w/9/16" raised base ... 261.99 ea 13975 5 spoke lid only ...................... 159.99 ea 13976 10 spoke lid only ...................... 159.99 ea

1397313971

Air Filter Element For OEM Air CleanerE1220 1968 250 1 bbl ................... 51.99 ea E1220 1968 250 4 bbl ................... 51.99 ea E1220 1968-70 350 2 bbl ................... 51.99 ea E1650 1968 350 4 bbl ................... 49.99 ea E1220 1968 400 2 bbl ................... 51.99 ea E1650 1968 400 4 bbl ................... 49.99 ea E1070 1969-76 250 1 bbl .................. 47.99 ea E1650 1969 350 4 bbl w/o Ram Air 49.99 ea E1650 1969-70 400 4 bbl w/o Ram Air 49.99 ea E1590 1970 400 4 bbl w/Ram Air ... 54.99 ea E1650 1971 455 4 bbl .................. 49.99 ea E1650 1971 400 4 bbl ................... 49.99 ea E1650 1971-76 350 2 bbl .................. 49.99 ea E1590 1972-79 400 4 bbl w/Ram Air ... 54.99 ea E1650 1972-79 400 4 bbl w/o Ram Air 49.99 ea E1650 1972-76 455 4 bbl w/o Ram Air 49.99 ea E1590 1972-76 455 4 bbl w/Ram Air ... 54.99 ea E1650 1972-74 400 2 bbl .................. 49.99 ea E1650 1975-77 350 4 bbl .................. 49.99 ea E1070 1977-78 231 2 bbl .................. 47.99 ea E1650 1977-78 403 4 bbl w/o Ram Air 49.99 ea E1590 1977-78 403 4 bbl w/Ram Air ... 54.99 ea E1450 1977 301 2 bbl ................... 46.99 ea E1450 1978-79 305 2 bbl ................... 46.99 ea E1500 1978-79 350 4 bbl ................... 45.99 ea E1450 1973 301 2 bbl ................... 46.99 ea E1590 1979 301 4 bbl w/Ram Air ... 54.99 ea E1450 1979-80 301 4 bbl w/o Ram Air 46.99 ea E1590 1979 403 4 bbl w/Trans Am . 54.99 ea E1650 1979 403 4 bbl w/o Trans Am 49.99 ea E1450 1979-80 231 2 bbl ................... 46.99 ea E1450 1980 265 2 bbl ................... 46.99 ea E1450 1980 301 4 bbl w/Turbo....... 46.99 ea E1500 1980 301 4 bbl w/Ram Air ... 45.99 ea E1410 1980 305 4 bbl w/Trans Am . 54.99 ea E1500 1980 305 4 bbl w/o Trans Am 45.99 ea E1450 1981 3.8L 2 bbl w/Trans Am 46.99 ea E1410 1981 4.3L 2 bbl ................. 54.99 ea E1430 1981 4.9L 4 bbl w/Turbo ..... 51.99 ea E1410 1981 4.9L 4 bbl w/o Turbo ... 54.99 ea E1500 1981 5.0L 4 bbl ................. 45.99 ea E1015 1982-83 2.5L TBI .................... 42.99 ea E1117 1982-83 5.0L TBI 2 required ..... 44.99 ea E1030 1982-84 2.8L 2 bbl .................. 49.99 ea E1450 1982-87 5.0L 4 bbl .................. 46.99 ea E1015 1984-86 2.5L FI ....................... 42.99 ea E0890 1985-86 5.0L FI ....................... 41.99 ea E0890 1985-86 2.8L FI ....................... 41.99 ea E0890 1987 2.8L MFI ................... 41.99 ea E0890 1987-92 5.0L TPI .................... 41.99 ea E0890 1987-89 5.7L TPI .................... 41.99 ea E1450 1988 5.0L FI ....................... 46.99 ea E0890 1988-89 2.8L FI ....................... 41.99 ea E0870 1989 3.8L FI w/Turbo .......... 39.99 ea E1450 1989-90 5.0L EFI .................... 46.99 ea E0890 1990-92 3.1L FI ....................... 41.99 ea E0890 1990-92 5.7L FI ....................... 41.99 ea E1450 1991-92 5.0L TBI .................... 46.99 ea 332042 1993-95 3.4L FI ....................... 44.99 ea 332042 1993-97 5.7L FI w/o Ram Air .... 44.99 ea 332042 1995-97 3.8L FI ....................... 44.99 ea 332035 1996-97 5.7L FI w/Ram Air ...... 85.99 ea 332118 1998-02 3.8L FI ....................... 64.99 ea 332118 1998-02 5.7L FI ....................... 64.99 ea

601290

601290

KK

En

gin

es &

Co

mp

on

en

ts

435

K&N PreCharger®

The K&N PreCharger® is a specially designed fi lter wrap made to extend the length of time between cleanings. A great idea when operating off road or in very dusty conditions. They are made from a durable polyester material containing uniform micron openings. The PreCharger® will stop small particles, yet add little restriction to the airfl ow of the fi lter. The PreCharger® is designed to be run dry and can be cleaned with K&N Filter Cleaner. Each comes silk screened with the K&N logo. Choose from black, blue, red or yellow, please specify color when ordering.14" Diameter XStream® Top PreChargers221430 with 3" element ...................... 39.99 ea 221440 with 4" element ...................... 39.99 ea 221450 with 5" element ...................... 44.99 ea

custom fi t pre-cleaner universal fi t pre-cleaner

PERFORMANCE FILTERS

K&N Airforce Pre-CleanerThe K&N Airforce Pre-Cleaner is a specially designed foam fi lter wrap made to extend the service interval of your K&N Air Filter. It is especially helpful when operating in very dusty conditions such as off-road or in construction sites. Manufactured from large open cell foam, the Airforce Pre-Cleaners are available as a custom fi t application for 14" round elements or as a universal “cut to fi t” application. “Cut to fi t” applications come with velcro straps to secure the foam to your air cleaner.14" Diameter Custom Fit Airforce Pre-Cleaners253750 with 4" high element ................ 24.99 ea 253760 with 5" high element ................ 29.99 ea 253770 with 6" high element ................ 31.99 ea Universal “Cut To Fit” Airforce Pre-Cleaners253900 7" high x 48" long .................... 24.99 ea 253918 18" high x 48" long .................. 49.99 ea 253924 24" high x 48" long .................. 59.99 ea 253930 30" high x 48" long .................. 75.99 ea

K&N Carburetor CoverDamage to pistons, rings and other components can be caused by accidently dropping something into your carb while the air cleaner assembly is off. The K&N Carburetor Cover is used on 5-1/8" carburetors eliminating the risk of dropping bolts, nuts, screws or other items down the throat and into the intake manifold. Also works well in keeping dirt, dust and other elements out of your carb during times you must store your engine or vehicle with the air cleaner assembly removed. Choose from black, red or orange.5-1/8" Carburetor Cover858913C specify black, red or orange ..... 31.99 ea

K&N PreCharger®

The K&N PreCharger® is a specially designed fi lter wrap made to extend the length of time between cleanings. A great idea when operating off road or in very dusty conditions. They are made from a durable polyester material containing uniform micron openings. The PreCharger® will stop small particles, yet add little restriction to the airfl ow of the fi lter. The PreCharger® is designed to be run dry and can be cleaned with K&N Filter Cleaner. Double stitched elastic openings keep the PreCharger® securely in place. Each comes silk screened with the K&N logo. Choose from black, blue, red or yellow. Important: Please specify black, blue, red or yellow when you place your order.

11" Diameter PreCharger®

E1250P 3-1/2" height ........................... 19.99 ea E3680P 5" height .................................. 19.99 ea E3690P 6" height .................................. 19.99 ea 14" Diameter PreCharger®

E1650P 3" height ................................. 24.99 ea E3750P 4" height .................................. 24.99 ea E3760P 5" height .................................. 24.99 ea E3770P 6" height .................................. 24.99 ea

Please specify color when placing your order

K&N Air Cleaner AssembliesA K&N Air Filter Element can be washed up to 25 times before it is considered no longer serviceable. Even though the fi lter may not show outward signs of deterioration, it should be replaced after 25 washings. Excessive washings will deplete the tiny cotton hairs that crisscross the openings. The resulting damage will allow tiny dust particles to pass through. The elements listed below are designed for use with our K&N chrome and stainless steel air cleaner assemblies.14" Round ElementsE1650 3" height, 14" diameter ............ 49.99 ea E3750 4" height, 14" diameter ............ 64.99 ea E3760 5" height, 14" diameter ............ 69.99 ea E3770 6" height, 14" diameter ............ 79.99 ea 11" Round ElementsKE1200 2-1/8" height, 11" diameter ..... 57.99 ea E1250 3-1/2" height, 11" diameter ...... 55.99 ea E3680 5" height, 11" diameter ............. 62.99 ea E3690 6" height, 11" diameter ............. 66.99 ea 14" Triangular ElementE3737 3" height, 14" triangular ........... 62.99 ea

XStream Air Flow Top and AssemblyIf your engine still has its stock style fi lter element and air cleaner assembly, it most likely is not realizing its full horsepower potential. Restrictive elements combined with the turbulence inside a stock fi lter housing tend to choke off critical airfl ow. Put an end to this dilemma with K&N’s XStream® Air Flow Top or the XStream® Air Flow Assembly and feed your engine all the air it can use. The result will be maximum horsepower! Choose from the complete assembly or just add the top to your existing round fi lter. Either way, you’ll enjoy the benefi ts of a high fl ow element that cuts turbulence. Cleanable and reusable just like our other fi lters. Total height listed below is the minimum clearance needed above the carburetor fl ange.XStream Air Flow Top (Top Only)661401 14" black rim ........................ 69.99 ea 661401XP 14" polished rim ................... 79.99 ea 661401XB 14" blue rim .......................... 79.99 ea 661401XR 14" red rim ............................ 79.99 ea XStream Air Flow Assembly 7/8" Drop (For 5-1/8" Neck Flange)663050 3" element (3-1/8" height) .... 169.99 ea XStream Air Flow Assembly 1-1/4" Drop (For 5-1/8" Neck Flange)663040 3" element (2-3/4" height) .... 144.99 ea 663060 4" element (3-3/4" height) .... 149.99 ea 663070 5" element (4-3/4" height) .... 174.99 ea XStream Air Flow Assembly Raised 9/16" Base (For 5-1/8" Neck Flange)663010 3" element (4-5/8" height) .... 154.99 ea 663020 4" element (5-7/8" height) .... 184.99 ea 663030 5" element (6-7/8" height) .... 189.99 ea

663060complete assembly

polished rim blue rim red rim

blue red yellowblack

Four Colors To Choose From!

1993-02 K&N Fuel Injection KitsIn the K&N tradition of engineering power, the K&N Filtercharger Injection Performance Kit (FIPK) dramatically reduces intake restrictions as it smooths and straightens air fl ow. This allows your vehicle’s engine to inhale a larger volume of air then in the OEM air fi lter assembly. More air means more usable power and torque throughout the engines RPM range, with even greater power gains in turbo-charged and supercharged engines. Fuel Injection Performance Kits are available for many popular performance vehicles, and are designed to replace the original air fi lter case without jeopardizing important emission standards. Exempted by the California Air Resource Board, Fuel Injection Performance Kits make it possible to experience the rapid acceleration of advanced air fl ow while meeting the tough emissions standards of C.A.R.B. These Fuel Injection Performance Kits are washable, reusable and backed by K&N’s unique 10 year Million Mile Limited Warranty.5730101 1993-95 3.4L F/I .................. 254.99 ea 5730101 1993-97 5.7L w/oRA or TC 254.99 ea 5730222 1998-02 5.7L w/o Ram Air . 399.99 ea

K&N Performance Filters

blue red yellowblack

PRECHARGERS

En

gin

es &

Co

mp

on

en

ts

436

KK

Toll Free Order Line 800.854.1280Replacement Air Cleaners

Spectre Low Profi le Oval Inlet Air CleanerLooking to add a high tech look to your engine compartment? Check out these Spectre ProFab low profi le oval inlet polished air cleaners. Available in single, or 90º dual styles. Fits all carburetors or TBI with 5-1/8" neck. Includes Spectre's HPR air fi lter.SP98801 single .................................... 199.99 ea SP98891 90º dual ................................ 199.99 ea

SP98851

SP98891

SP98801

AirAid Universal 14" Air FilterAirAid's Concept II filter features a beautiful lightweight aluminum lid that's perfect for user customization. The curved top enhances air fl ow and provides additional clearance for the carburetor fl oat bowl vents. . The new element features SynthaMax material, a 100% synthetic, non-oiled, color fast, classic red media. Billet tool & key fob included. Available in 3", 4" and 5" size.AR801451 3" element ........................ 159.99 ea AR801455 4" element ........................ 164.99 ea AR801461 5" element ........................ 169.99 ea

AR801451


Elite Series Air CleanersDesigned to match the Elite Series valve covers and breathers. All Elite series air cleaners have polished aluminum fi nned tops a with black matte background. Available with the Edelbrock logo. All include a black anodized knurled nut and PCV adapter. For use on 5-1/8" carburetor necks. Important: Use E4221 with all Edelbrock square bore carburetors and Q-jets.Note: No further discounts apply.

Round 14" diameter w/3" elementE4207 with logo ................................. 79.99 ea E4221 with logo ................................. 79.99 ea Round 10" diameter w/2" elementE4210 with logo ................................. 69.99 eaTriangular w/2-1/2" washable elementE4222 with logo ................................. 124.99 ea

E4222

Tri-Star Chrome Air Cleaner Wing NutAir cleaner Tri-Star nut offers a unique, performance appearance and will fi t virtually any air cleaner. Available in large or small format. 66201 small ......................................... 1.99 ea 66200 large .......................................... 2.99 ea

6620166200

Hi-Tech Air Cleaner Wing NutsAvailable in both large and small sizes! The large size is recommended for 10" or 14" air cleaner kits and the small for 6-3/4" or 4-7/16" air cleaners. Each air cleaner spinner is die cast showing the logo, coated with clear epoxy. They fi t both 1/4" - 20 and 5/16" - 18 studs. D141332 small ...................................... 9.99 ea D141327 large ....................................... 12.99 ea

1967-81 Standard Air Cleaner Wing NutCorrect wing nut used with all 1/4" carburetor studs. After years of use your original air cleaner can become rusted or broken. These wing nuts are the perfect replacement for a rusty or damaged original. 219281 1967-81 chrome ...................... 4.99 ea A13258 1967-81 standard .................... 1.99 ea

K0073 A13258

D141332

D141327

Air Cleaner Adaptor Carb NeckAdapter to fi t 5-1/8" air cleaners to 4-7/32" carburetor necks.66315 .................................................. 7.99 ea

Edelbrock Air Cleaner SpacersThese 5-1/8" diameter plastic spacers from Edelbrock get you the clearance you need between the carburetor and air cleaner base. Available in 1/2" and 3/4" sizes. Made in USA.Note: No further discounts apply.

E8093 1/2" tall spacer .......................... 14.99 ea E8092 3/4" tall spacer .......................... 6.99 ea

E8092

Rubber Air Cleaner Base GasketThis buna rubber air cleaner base gasket forms a positive seal between the air cleaner and the top of carburetors with a 5-1/8" neck. Designed for air cleaners with a straight lip, the gasket has a groove that fi ts over the lip for a superior seal against dust and debris. It can also be fl ipped and used on air cleaners with a rolled lip. 297331 .................................................. 6.99 ea

1967-81 Carburetor to Air Cleaner StudReplacement carburetor stud for all 1967-81 models equipped with Rochester and Carter carburetors. Cut to required length.Important: Hood damage may occur if stud is not trimmed to fi t. 3851738 1967-81 1/4"-20 x 9" ............. 6.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

437

Air Cleaner Products

Chrome Air Cleaner ShroudKeep dirt out of your air cleaner without losing breathing capacity. Fits 14" air cleaners with 3" elements. This shroud will dress your engine compartment and compliment your chrome air cleaner. T2337 .................................................. 9.99 ea

Air Cleaner Products

1980-81 Air Cleaner Sensor UnitsOriginal AC Delco air sensors install in the air cleaner snorkel which allows the fl apper door located in the snorkel to open allowing cooler air to enter. G10044 1980 301 w/perf. option . 68.99 ea G1313 1980-81 305 ......................... 100.99 ea G10044 1980-81 4.9L........................ 68.99 ea G10044 1981 301 all .................... 68.99 ea

G1313

1999-02 Air Cleaner ResonatorOriginal GM resonator that connect to the front of the air cleaner cover.G4262 1999-02 6 cyl. ...................... 118.99 ea G4266 2000-02 8 cyl. ...................... 63.99 ea

1993-02 Intake Air DuctsOriginal GM air duct that connects the mass air fl ow sensor to the intake manifold.Front Air DuctG4264 1998-02 8 cyl. ....................... 65.99 ea Rear Air DuctG4254 1993-94 8 cyl. w/AC ............. 276.99 ea G4255 1993-94 8 cyl. w/o AC ........... 76.99 ea G4257 1995 8 cyl. w/o AC ........... 156.99 ea G4256 1996-97 8 cyl. w/AC .............. 198.99 ea G4267 1998-02 8 cyl. ....................... 51.99 ea

1998-02 Air Temperature SensorOriginal AC Delco sensor mounts on the duct between the mass air fl ow sensor and the throttle body.G4263 1998-02 .................................... 17.99 ea

G4267

G4264

G4262

TA4039

TA4040

1973-81 Air Cleaner Duct Housing AdapterReproduction of the ABS plastic air cleaner duct housing adapter used on 1973-81 Trans Am models. This part mounts on the air cleaner and converts the 2" x 6" oval hole on the air cleaner the 4" round air duct hose on the fender air scoop.14401 1973-81 .................................... 52.99 ea

1998-02 Air Cleaner HousingOriginal GM air cleaner housing for the air fi lter on all 1998-02 Firebird models.G4260 1998-02 all ........................... 158.99 ea

1998-02 Volant Cool Air IntakeVolant Cool Air Intakes are all about providing performance while adding a look of style and attitude to your fuel injected Firebird. This is the only intake that draws cool air from outside the HOT engine compartment! This is accomplished by concealing the high fl ow gauze cone fi lter inside a roto-molded cool air box, forcing the intake to draw air through the fender and grill areas. This provides the coolest air charge to your fuel injection and creates the most horsepower possible. By isolating the air fi lter, it prevents excessive engine noise while still providing the optimum performance. Volant manufactures each cool air box with a stylish look and connects the components using high performance silicone couplers.V15958 1998-02 5.7 .......................... 321.99 ea

The only intake that draws cool air from outside the HOT engine compartment!

1977-79 Trans Am Air Cleaner ElbowReproduction Oldsmobile 403 engine air cleaner to vent pipe rubber elbow for 1977-79 Trans Am models. This elbow connects the breather pipe to the air cleaner and valve cover breather.TA4039 1977-79 long .......................... 8.99 ea TA4040 1977-79 short ......................... 7.99 ea

1973-79 Air Intake Duct HoseThis reproduction duct hose for 1973-79 Firebird models delivers fresh cool air from the fender to the air cleaner. Manufactured from 4" wire reinforced plastic skinned fl exible tubing, this duct hose includes correct factory style clamps riveted to the wire reinforcement.Note: Not for use with 1977-81 Pontiac 301 ci engines. 162912 1973-79 ................................... 34.99 ea

G4256

1994-97 JET Inlet Air Temp Relocator The JET IAT Relocator kit repositions the Inlet Air Temperature sensor to a cooler location in the air intake system to provide a lower air temperature reading to the computer. By doing this throttle response and horsepower are increased along with improved drivability. No other vehicle modifi cations are required, but the kit is compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, free fl ow exhaust systems, etc. JT61630 1994-97 350 LT1................... 44.99 ea

En

gin

es &

Co

mp

on

en

ts

438

KK


SP70771B

SP74762A

SP70752D

Performance Intakes

Universal 14" or 16" Air BoxesDirect cool air into your engine with these universal air boxes. Includes components and hardware for installation in most vehicles. 180˚, 150˚, 135˚, and 120˚ versions are available. Choose from 14" or 16" housing with either black or chrome ducting. Fits standard 5-1/8" carb neck.14" Universal Air Box SP70228A black duct 180˚ ............ 149.99 ea SP70228B chrome duct 180˚ ............ 229.99 ea SP70318A black duct 150˚ ............ 149.99 ea SP70318B chrome duct 150˚ ............ 229.99 ea SP70328A black duct 135˚ ............ 149.99 ea SP70328B chrome duct 135˚ ............ 229.99 ea SP70338A black duct 120˚ ............ 149.99 ea SP70338B chrome duct 120˚ ............ 229.99 ea 16" Universal Air Box SP70168A black duct 180˚ ............ 199.99 ea SP70168B chrome duct 180˚ ............ 229.99 ea SP70188A black duct 150˚ ............ 249.99 ea SP70188B chrome duct 150˚ ............ 279.99 ea SP70138A black duct 135˚ ............ 249.99 ea SP70138B chrome duct 135˚ ............ 279.99 ea SP70118A black duct 120˚ ............ 199.99 ea SP70118B chrome duct 120˚ ............ 229.99 ea

Universal 90˚/45˚ Single Plenum Air IntakeThese air intake systems use a single plenum design with 45˚/90˚ tube to get the most power from your engine! Available for driver or passenger side in standard height or low profi le confi guration. Includes intake tubes, fi lters, boots, clamps, and hardware. Choose from blue, black, red, or white fi lters. Fits standard 5-1/8" carb neck.Note: Standard height air intakes require 3-1/2" clearance between the top of the carburetor and the hood. Low-profi le air intakes require 2-1/2" clearance between the top of the carburetor and the hood.Standard Height Air Intakes SP70741A blue fi lter passenger side . 149.99 ea SP70741B black fi lter passenger side . 149.99 ea SP70741C red fi lter passenger side . 149.99 ea SP70741D white fi lter passenger side . 149.99 ea SP70742A blue fi lter driver side ........ 149.99 ea SP70742B black fi lter driver side ........ 149.99 ea SP70742C red fi lter driver side ........ 149.99 ea SP70742D white fi lter driver side ........ 149.99 ea Low-Profi le Air Intakes SP70751A blue fi lter passenger side . 149.99 ea SP70751B black fi lter passenger side . 149.99 ea SP70751C red fi lter passenger side . 149.99 ea SP70751D white fi lter passenger side . 149.99 ea SP70752A blue fi lter driver side ........ 149.99 ea SP70752B black fi lter driver side ........ 149.99 ea SP70752C red fi lter driver side ........ 149.99 ea SP70752D white fi lter driver side ........ 149.99 ea

Low Profi le Dual Plenum Air IntakesGet the most power from your engine with these sheet metal aluminum plenum designs, offering extremely low profi le dimensions for tight hood clearance applications. Available with two 45˚ tubes or two 45˚/90˚ tubes. Fits all carburetors and TBI throttle bodies with 5-1/8" neck. Includes intake tubes, fi lters, boots, clamps, and hardware. Choose from blue, black, red, or white fi lters.Note: *Requires 2-1/2" clearance between the top of the carburetor and the hood. **Requires 2" clearance between the top of the carburetor and the hood.

Dual Plenum Air Intakes SP70771A * blue fi lters ......................... 249.99 ea SP70771B * black fi lters ....................... 249.99 ea SP70771C * red fi lters .......................... 249.99 ea SP70771D * white fi lters ....................... 249.99 ea

Dual Plenum Sheet Metal IntakesIntake with Two 45˚/90˚ tubes SP70764C ** red fi lters .......................... 269.99 ea SP70764D ** white fi lters ....................... 269.99 ea Intake with Two 45˚ Tubes SP70778B ** black fi lters ....................... 229.99 ea SP70778C ** red fi lters .......................... 229.99 ea SP70778D ** white fi lters ....................... 229.99 ea

Universal Dual Plenum Air IntakesThese air intake systems use a dual plenum design available with two 45˚ intake tubes or two 6" straight tubes both with two fi lters to get the most power from your engine! Includes intake tubes, fi lters, boots, clamps, and hardware. Choose from blue, black, red, or white fi lters. Fits standard 5-1/8" carb neck. Note: *Requires 3-1/2" clearance between the top of the carburetor and the hood. **Requires 3-3/4" clearance between the top of the carburetor and the hood.45˚ Tubes SP70761A * blue fi lters ......................... 199.99 ea SP70761B * black fi lters ....................... 199.99 ea SP70761C * red fi lters .......................... 199.99 ea SP70761D * white fi lters ....................... 199.99 ea 6" Straight Through Tubes SP70796A ** blue fi lters ......................... 199.99 ea SP70796B ** black fi lters ....................... 199.99 ea SP70796C ** red fi lters .......................... 199.99 ea SP70796D ** white fi lters ....................... 199.99 ea

Extrafl ow 14" Air CleanersThese muscle car air cleaners combine a modern appearance with the classic style of the past. Washable and reusable, these lifetime fi lters provide more power and performance by allowing more air fl ow into your engine than ordinary paper fi lters. Includes the top, base, and Spectre HPR® air fi lter in your choice of red, blue, black or white. 3" Tall Filter SP74762A blue ..................................... 99.99 ea SP74762B black.................................... 99.99 ea SP74762C red ....................................... 99.99 ea SP74762D white ................................... 99.99 ea 4" Tall Filter SP74763A blue ..................................... 119.99 ea SP74763B black.................................... 119.99 ea SP74763C red ....................................... 119.99 ea SP74763D white ................................... 119.99 ea

blue

blue

blue

blue

black

black

black

black

red

red

red

red

white

white

white

white

SP70228A

SP70338B SP70168A SP70188B

SP70741A

SP70764C

SP70778D

SP70761A

SP70796D

SP70771A

SP70771C

Spectre Performance

KK

En

gin

es &

Co

mp

on

en

ts

439

Performance IntakesSP70793C

Universal Single Plenum Air IntakesThese air intake systems use a single plenum design with 90˚ tube to get the most power from your engine! Available in standard height or low profi le confi guration. Includes intake tubes, fi lters, boots, clamps, and hardware. Choose from blue, black, red, or white fi lters. Fits standard 5-1/8" carb neck.Note: Standard height air intakes require 3-1/2" clearance between the top of the carburetor and the hood. Low-profi le air intakes require 2-1/2" clearance between the top of the carburetor and the hood.Standard Height - 90° Tube SP70747A blue fi lter ........................... 149.99 ea SP70747B black fi lter ......................... 149.99 ea SP70747C red fi lter ............................. 149.99 ea SP70747D white fi lter ......................... 149.99 ea Low Profi le - 90° Tube SP70757A blue fi lter ........................... 149.99 ea SP70757B black fi lter ......................... 149.99 ea SP70757C red fi lter ............................. 149.99 ea SP70757D white fi lter ......................... 149.99 ea Standard Height - Y-Tube SP70748A blue fi lters .......................... 199.99 ea SP70748B black fi lters ........................ 199.99 ea SP70748C red fi lters ........................... 199.99 ea SP70748D white fi lters ........................ 199.99 ea Low Profi le - Y-Tube SP70758A blue fi lters .......................... 199.99 ea SP70758B black fi lters ........................ 199.99 ea SP70758C red fi lters ........................... 199.99 ea SP70758D white fi lters ........................ 199.99 ea

Spectre Accucharge Precision Air Filter Oiling SystemThe Accucharge precision oiling system applies the correct amount of oil for optimal performance - no more, no less. Designed specifi cally for cleaning and oiling of Spectre HPR® fi lters. As simple to use as a measuring cup! Includes 12 oz. of cleaner and 8 oz. of oil. SP704820 .............................................. 12.99 ea

Universal DTM Plenum Air IntakesThese air intake systems use a DTM (Down The Middle) plenum design with either a 90˚ or Y-tube tube to get the most power from your engine! Includes intake tubes, fi lters, boots, clamps, and hardware. Choose from blue, black, red, or white fi lters. Fits standard 5-1/8" carb neck.Note: Each DTM intake requires 2-1/4" clearance between the top of the carburetor and the hood.90˚ Tube SP70792A blue fi lter ............................ 299.99 ea SP70792B black fi lter .......................... 299.99 ea SP70792C red fi lter.............................. 299.99 ea SP70792D white fi lter .......................... 299.99 ea Y-Tube SP70793A blue fi lter ............................ 339.99 ea SP70793B black fi lter .......................... 339.99 ea SP70793C red fi lter.............................. 339.99 ea SP70793D white fi lter .......................... 339.99 ea

Spectre HPR® Air FiltersSpeed By Spectre HPR® (high performance racing) air fi lters - the world's fastest air fi lters! Washable and reusable, these lifetime fi lters are designed to provide you with more horsepower and quicker acceleration by allowing more air fl ow into your engine than ordinary paper fi lters.Round Filter - 14" x 4" SP71014A blue ..................................... 39.99 ea SP71014B black ................................... 39.99 ea SP71014C red ....................................... 39.99 ea SP71014D white ................................... 39.99 ea Round Filter - 14" x 5" SP71015A blue ..................................... 59.99 ea SP71015B black ................................... 59.99 ea SP71015C red ....................................... 59.99 ea SP71015D white ................................... 59.99 ea Oval Filter - 11-1/2" x 8" x 2" SP71016A blue ..................................... 29.99 ea SP71016B black ................................... 29.99 ea SP71016C red ....................................... 29.99 ea SP71016D white ................................... 29.99 ea Oval Filter - 15" x 8" x 2" SP71017A blue ..................................... 39.99 ea SP71017B black ................................... 39.99 ea SP71017C red ....................................... 39.99 ea SP71017D white ................................... 39.99 ea Triangle Filter - 14" x 3" SP71018A blue ..................................... 49.99 ea SP71018B black ................................... 49.99 ea SP71018C red ....................................... 49.99 ea SP71018D white ................................... 49.99 ea

Spectre HPR® Cone Air FiltersThese Spectre HPR® air fi lters are the most versatile of their kind on the market! Designed to fi t 3", 3-1/2", and 4" tubes. Washable and reusable, these lifetime fi lters provide more power and performance by allowing more air fl ow into your engine than ordinary paper fi lters. Note: *Will only fi t 3" inlet tubes. Also features all-rubber construction, no chrome fi nish.3.7" Tall Filter SP71011A blue ..................................... 19.99 ea SP71011B black ................................... 19.99 ea SP71011C red ...................................... 19.99 ea SP71011D white ................................... 19.99 ea 6.5" Tall Filter SP71010A * blue ..................................... 19.99 ea SP71010B * black ................................... 19.99 ea SP71010C * red ...................................... 19.99 ea SP71010D * white ................................... 19.99 ea 6.7" Tall Filter SP71012A blue ..................................... 29.99 ea SP71012B black ................................... 29.99 ea SP71012C red ...................................... 29.99 ea SP71012D white ................................... 29.99 ea 10.5" Tall Filter SP71013A blue ..................................... 39.99 ea SP71013B black ................................... 39.99 ea SP71013C red ...................................... 39.99 ea SP71013D white ................................... 39.99 ea

blue

blue

blue

blue

black

black

black

black

red

red

red

red

white

white

white

white

SP70792B

SP71013DSP71010A

SP70757C

SP70748A

SP70758C

SP70747B

Spectre Performance

SP71015B

SP71017B

SP71014A

SP71018A

En

gin

es &

Co

mp

on

en

ts

440

KK

Toll Free Order Line 800.854.1280Valve Covers

Valve Covers

1962-79 301-455 Valve CoversAftermarket style chrome valve covers for all Pontiacs with 301-455 V8. This chrome valve cover is a high profi le cover featuring triple chrome plating. Dress up your engine compartment with this aftermarket chrome valve cover. Pontiac engines only. Note: Not for use on cars w/AC. T9300 1962-79 .................................... 69.99 pr

1977-92 Chevy Small Block Valve CoversDirect replacements for damaged original valve covers for 1977-92 Firebird equipped with Chevrolet V8 small block engines. These valve covers are designed to replace originals which may have suffered dents or other signs of neglect. Features original GM black fi nish.Note: Valve covers do not include grommets which may be purchased separately.Left Hand SideG7206 1977-86 V8 ............................ 79.99 ea G7209 1987-88 5.0-E/F/H & 5.7-8 ..... 71.99 ea G7209 1989 5.0-E/F & 5.7-8 ....... 71.99 ea G7210 1990-92 5.0-E ........................ 73.99 ea G7209 1990-92 5.0-F 5.7-8 ............... 71.99 ea Right Hand SideG7208 1987-88 5.0-E/F/H & 5.7-8 ...... 68.99 ea G7208 1989 5.0-E/F & 5.7-8 ....... 68.99 ea G7208 1990-92 5.0-E ........................ 68.99 ea G7209 1990-92 5.0-F & 5.7-8 ........... 71.99 ea G7211 1990-92 5.0-F & 5.7-8 ........... 68.99 ea

T9461

TA4036

1977-86 Chevy SB Aluminum Valve CoversNow you can easily check your valve train while the engine is running. The diagonal cut of the top section ensures no mess. Each valve cover features oversize bolts for fast removal, a top and bottom section, and a retained gasket for a tight seal. Will clear roller rockers and stud girdles. Comes with required allen wrench. Fits Chevrolet small block 1977-86 engines. Removable OEM style baffl e. Valve covers come equipped with baffl e and grommets. Sold in pairs. 141915 1977-86 valve covers ............ 209.99 pr 141916 1977-86 gasket set ................ 16.99 set

Small Block Chevrolet Valve CoversDie cast fi nned aluminum valve covers for small block Chevrolet motors are available in either a highly polished or beautiful black powder coat fi nish and include two chrome breather caps.Note: * Breather caps not includedPolished AluminumVC4002 350...................................... 224.99 pr VC4007 * fi nned, no holes .................. 224.99 pr Powder Coated Black VC5002 350...................................... 199.99 pr

VC5002

VC4007

G7206

G7210

G7209

G7211

1977-79 Trans Am Valve CoversValve cover for 1977-79 Trans Am models with Oldsmobile 403 engines. These Oldsmobile factory correct notched valve covers feature correct baffl e design and factory spot welds and valve covers are chrome plated for corrosion resistance and long lasting good looks. Available in either paint to match or chrome fi nish.Note: Due to variations in cylinder heads only fi ve bolts may be required to securely mount valve covers. TA4036 1977-79 chrome ................... 233.99 pr TA4035 1977-79 paint to match ........ 181.99 pr

1977-86 Clear Vue SB Chevy Valve CoversClear Vue valve covers show off your valve train to make any custom motor unique. These covers are manufactured from a heat resistant clear material that will not warp, haze, or become yellow over time. Oil sheets off after high RPM in about 30 seconds. These valve covers are NHRA certifi ed for Sportsman Gas Class vehicles. Sets include two clear valve covers, two stainless steel defl ector plates and two chrome breather caps with grommets. Made in USA.Important: Spreader bars recommended for installation. Not for use on menthanol supercharged engines. 10110 1977-86 ................................... 289.99 set

301-455 Low Profi le Chrome Valve CoversDress up your engine compartment with these aftermarket and OEM style valve covers for 1967-81 Pontiac models with 301-455 V8 (except turbo). These triple chrome plated valve covers feature a low profi le design and are available in double ribbed form or with a smooth design. Ribbed valve covers are designed for push-in oil caps. Smooth valve covers are designed for a twist-on oil cap on the left side with a breather opening on the right and are available with drippers to get the oil where it needs to be to reduce wear on your engine. T9461 ribbed w/o drippers ......... 59.99 pr A8700118 smooth w/o drippers ......... 109.99 pr N9460 smooth w/drippers ............ 135.99 pr

N9460

Streamline Series Valve CoversGet a fresh new look for your small block Chevy engine! These tall valve covers are manufactured from cast aluminum with polished two-piece billet accents. Available with a satin black powder coat or bead blasted and ready to paint. Includes stainless steel hardware and baffl es. A great complement to Streamline series air cleaners! Made in USA.Note: No further discounts apply.

952240 black ................................... 199.99 pr 952241 ready to fi nish ..................... 199.99 pr

952240

141915

KK

En

gin

es &

Co

mp

on

en

ts

441

Valve Covers

Pontiac Engine Dress Up SetDress up your Firebird with this great set which includes chrome valve covers, hold down tabs for valve covers, chrome breather, breather grommet, PCV grommet. Fits Pontiac 301-455 V8 engines. This unique set will completely dress your engine compartment and includes virtually every chrome component you’ll need to impress even the most hard core Pontiac enthusiast! We offer this chrome dress up set with baffl ed valve covers. Note: This set will fi t all Pontiacs except 389 and 403 models. Not for use on vehicles originally equipped with air conditioning.T3100 3-1/2" high .............................. 121.99 set

Pontiac Aluminum Valve CoversDie cast fi nned aluminum Pontiac valve covers. These top quality valve covers feature a bright polished fi nish and include two chrome breather caps and grommets. Fits Pontiac 301-455 engines.VC8001 Pontiac ................................... 299.99 pr

1967-86 Signature Series Valve CoversEngineered for function and good looks, triple chrome plated Signature Series valve covers have stock-style breather baffl es that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment including PCV valve. Rubber grommets for the breather and PCV holes are included. Matching breathers are sold separately. Note: No further discounts apply.Pontiac 301-455E4456 1967-79 no baffl e ................... 51.99 pr 350 & 403 OldsE4485 1967-80 5 & 10 bolt heads .... 54.99 pr Chevrolet Small BlockE4449 1977-86 low profi le, chrome . 39.99 pr E4443 1977-86 low profi le, black ..... 39.99 pr E4649 1977-86 tall profi le, chrome .. 49.99 pr

Elite Series Valve CoversThese heavy gauge die-cast aluminum valve covers come with a handsome polished fi nish for a custom look. The raised fi ns are accented by a black matte background, then detailed with allen head bolts that create a two piece look. Important: E4246 with left breather hole fi ts 1987-92 Chevy passenger cars and 1986-91 Corvettes with aluminum heads. Not for LT-1 or LT-4.

Note: No further discounts apply.

Pontiac 301-455E4256 1967-79 ................................... 139.99 pr Centerbolt Covers E4246 1987-95 w/LH side breather .... 149.99 pr

E4485

E4456

E4246

1962-79 Edelbrock Aluminum Valve CoversEdelbrock made these valve covers in the late 50s, and they’re still classy today. Made of heavy gauge, sand cast aluminum, they have enough height to clear the rockers.Note: No further discounts apply.Pontiac 301-455E4130 1962-79 polished fi nish ....... 249.99 pr E41303 1962-79 black fi nish ............ 231.99 pr Chevrolet Small BlockE4145 polished ............................... 209.99 pr E4144 polished with oil fi ll hole ..... 209.99 pr E41453 black ............................... 224.99 pr E41443 black with oil fi ll hole ..... 239.99 pr

E4130

Holley M/T Valve CoversEach die–cast valve cover is precision manufactured with knock–out plugs for stock PCV (smog control) and oil fi ll installations. Available for small block Chevy engines in either polished or krinkle black fi nish.H24182 SBC polished ...................... 134.99 pr H24183 SBC krinkle black ............... 124.99 pr

H24183

H24182

1993-97 Aluminum LT1 Valve CoversThese premium valve covers are designed specifi cally for 1993-97 GM LT1 engines. Manufactured from cast aluminum and polished to a high luster. Valve covers include new bolts, baffl es and grommets.Note: Gaskets not included. 6045 1993-97 LT1 valve covers ... 129.99 pr

Billet Aluminum LS Valve CoversGive your LS engine a clean, classic look with these billet valve covers! Their modular design incorporates billet tops to cover the ignition coils and the oil cap to provide the appearance of traditional ribbed aluminum valve covers. Available in black anodized or mirror polished fi nish for LS1 and LS3 engines. Includes billet oil cap, polished ARP stainless steel hardware, and installation instructions. Made in USA.Important: Must be used with engine model specifi c OEM GM ignition coils.Note: No further discounts apply. 95460 LS1 polished .................... 1094.99 pr 95465 LS1 black ......................... 1249.99 pr 95470 LS3 polished .................... 1094.99 pr 95475 LS3 black ......................... 1249.99 pr

95460 95475

Valve Covers

En

gin

es &

Co

mp

on

en

ts

442

KK


1967-02 PCV ValvesA PCV valve is a vacuum-controlled metering device that regulates the fl ow of crankcase fumes in the positive crankcase ventilation system by allowing more fl ow at high speed than at low speed, and acts as a system shutoff in case of engine backfi re to prevent an explosion in the crankcase. It is recommended to replace your PCV valves every tune-up. Fits 1967-02 6 and 8 cylinder Firebird models. 6 CylinderPCV100 1970-73 250 .......................... 3.99 ea PCV77 1974-76 250 .......................... 3.99 ea PCV100 1977-81 231 .......................... 3.99 ea PCV89 1978 231 AT (exc. CA) ... 2.99 ea PCV117 1982 2.8L......................... 3.99 ea PCV82 1983-84 2.8L......................... 3.99 ea PCV68 1985-89 2.8L......................... 4.99 ea PCV100 1989 3.8L......................... 3.99 ea PCV68 1990-92 3.1L......................... 4.99 ea PCV82 1993-95 3.4L......................... 3.99 ea PCV68 1995-02 3.8L......................... 4.99 ea 8 CylinderPCV20 1967-76 all ............................ 2.99 ea PCV100 1976 350 w/2bbl , AT ...... 3.99 ea PCV80 1977 301 .......................... 3.99 ea PCV76 1977-89 305 .......................... 2.99 ea PCV20 1977 350, 400, 403 .......... 2.99 ea PCV76 1978-79 350 .......................... 2.99 ea PCV20 1977-79 400, 403 .................. 2.99 ea PCV80 1979-80 301 w/o turbo & HP 3.99 ea PCV103 1980-81 301 w/HP exc. turbo 3.99 ea PCV80 1980-81 301 w/turbo ............ 3.99 ea PCV108 1981 265 .......................... 3.99 ea PCV76 1981 267 .......................... 2.99 ea PCV108 1981 301 w/o HP ............. 3.99 ea PCV76 1987-89 5.7L......................... 2.99 ea PCV82 1990-92 5.0L-F ..................... 3.99 ea PCV76 1990-92 5.0L-E ..................... 2.99 ea PCV82 1990-92 5.7L......................... 3.99 ea PCV145 1993-97 5.7L......................... 3.99 ea PCV224 2000-02 5.7L......................... 3.99 ea

PCV68PCV82

PCV Valves & Components

Aluminum PCV ValveThis aluminum housed PCV valve is just what you need to fi nish your engine bay detailing project. Manufactured with a 3/4" neck for 3/4" ID grommets. Note: Rubber grommet not included. T6068 polished PCV valve ................ 19.99 ea T6067 chrome PCV valve ................. 23.99 ea

Universal Crankcase Evacuation SystemThis universal crankcase evacuation system is designed for high performance and racing applications. It replaces the standard PCV to air cleaner system by connecting to the exhaust system allowing exhaust pressure to pull the gasses from the crankcase. Includes two simple pipes with one-way valves that weld to the header collectors and are connected to dual valve cover breathers.Note: Not for use on pollution controlled vehicles. For valve covers with 1-1/4" holes. Hoses are not included. 20501 crankcase evacuation set ...... 34.99 set

Dual Flow Adjustable PCV ValveStock PCV valves are not designed to work with modifi ed high performance engines due to their altered vacuum profi les. A mismatched PCV valve can cause oil to push out of your breathers, cause oil leaks, or contaminate your oil with piston blow-by gasses. Now you can manage your crankcase pressure with this fully adjustable 6061-T6 billet aluminum dual-fl ow PCV valve. Once adjusted, the valve will provide suffi cient crankcase ventilation during both idle and cruise. Valve fi ts 3/4" ID valve cover grommets and 3/8" ID PCV lines. An available adapter allows for installation on 3/8" ID inline applications. PCV valve set includes valve, vacuum gauge fi tting, allen wrench, and detailed instructions. Made in USA.Note: Not intended for use on pollution-controlled vehicles. DF1700 adjustable PCV valve ........... 128.99 ea DF1701 billet inline adapter .............. 21.99 ea DF1702 PCV valve rebuild kit ........... 14.99 kit

DF1701DF1700

T6068

1967-69 PCV Valve Hose ClampFor use with PCV valve hose and power brake valve hose. Correct style black pinch clamp.K0051 1967-69 .................................. .99 ea

1967-69 OEM PCV Valve HoseExcellent quality reproduction, thick walled hose with 90 degree bend as original. Clamps included. For use with all applications.K0058 1967-69 .................................. 13.99 ea

1968-76 Air Cleaner Vent TubesReproduction vent tubes designed to fi t on the RH valve cover. Available for 1968-76 models. Check the listings below for correct tubes for your year and model. FAC6801 1968-74 w/o Ram Air .......... 29.99 ea A8700105 1969 TA w/Ram Air ....... 29.99 ea FAC6901 1969-70 Ram Air ................. 25.99 ea FAC7001 1971-72 Ram Air ................. 25.99 ea A8700106 1971-76 TA w/shaker scoop 29.99 ea

FAC6801

FAC6901

FAC7001 A8700105

A8700106

1971-92 Valve Cover GrommetsWe offer a full line of replacement valve cover grommets. These are the correct grommets which insert into the valve cover where the PCV or air cleaner to valve cover elbow is inserted. Choose from a wide variety of 6 cylinder or 8 cylinder grommets depending on your year and model.T4998 1971-75 250 ............................ 1.99 ea T4998 1976 V8 (with A.C.) .......... 1.99 ea G9095 1977-79 305, 350-L ................ 2.99 ea T4998 1977-79 400, 403 .................... 1.99 ea G9097 1978 350-X ........................ 4.99 ea G9097 1981 231-A ........................ 4.99 ea G9097 1989 3.8-7 ......................... 4.99 ea D141615 1967-79 V8 ............................ 4.99 pr G9095 1980-92 V8 ............................. 2.99 ea

G9095

Specialty GrommetsThis is a rubber oil baffl e and breather grommet all in one! The angled slots on the bottom and foam insert stop oil seepage and act as a baffl e. Installs on all steel valve covers with 1.25" diameter breather holes. Utility plug manufactured in rubber for valve covers with 1.25" diameter holes. Will plug up the opening hole when not using PCV or oil fi ller cap applications. T9358 rubber baffl e, each .................... 1.99 ea T9359 rubber baffl e, pair ..................... 2.99 pr G7229 utility plug ................................ 1.99 ea

T9358 G7229

PCV Valves & Components

Keep Your Oil Cleaner With An Adjustable PCV Valve!

KK

En

gin

es &

Co

mp

on

en

ts

443

Chrome Valve Cover BreathersYour choice of any of these aftermarket style valve cover breathers. Each chrome breather and fi ller cap includes the highest quality chrome available for each application. Choose from “push-in”, “push-on” or “twist-on” styles and breathers with or without 1/2" PCV tubes.

Circular Valve Cover BreathersWithout PCV Tube66008 push-in, 3" dia., fi ts 1" i.d. ............ 4.99 ea 66035 push-in, 3" dia., fi ts 3/4" i.d. ......... 6.99 ea 66009 push-on, 3" dia.............................. 5.99 ea 66010 twist-on, 3" dia. ............................ 5.99 ea With PCV Tube66017 push-in, w/1/2" PCV tube, 3" dia., for 7/8" i.d. grommet .................... 5.99 ea T9242 push-in, w/1/2" PCV 2-3/4" dia., for 7/8" i.d. grommet ................... 7.99 ea 66012 twist-on, w/1/2" PCV , 3" dia. ...... 5.99 ea

Rectangular Valve Cover Breathers66014 push-in with 7/8" i.d. grommet .... 7.99 ea

66008

1967 OE Style Oil Breather CapThis OE style oil cap is designed to fi t 1967 6 and 8 cylinder applications. Available for models with or without air. Choose from the twist-on or push-on styles.

Without California EmissionsST10061 1967 6 cyl push on .... 3.99 ea ST10064 1967 326 & 400 twist on .... 3.99 ea

With California EmissionsST10070 1967 6 cyl push on .... 4.99 ea ST10070 1967 326 & 400 push on .... 4.99 ea

1967 Chrome Oil Breather CapThis is an exact reproduction of the original style valve cover breather cap. This cap is chrome and has the correct double dimples with the embossed AC-OIL on top. This is a twist-on cap.F654 1967 chrome ..................... 32.99 ea

66014

Push In Chrome Breather CapChrome plated oil breather caps in a variety of styles. Comes with grommet to fi t valve covers with 1.25" hole. T9242 has 5/8" dia. PCV tube.T4871 without PCV tube ..................... 6.99 ea T9242 with PCV tube .......................... 7.99 ea

T4871

Edelbrock Valve Cover BreathersElite Series

Elite series breathers are die-cast aluminum with a foam element. 3 styles are available. The side mount and top mount breathers require drilling to install. Note: No further discounts apply.E4204 push-in style w/logo ................. 24.99 ea E4214 push-in style w/o logo .............. 24.99 ea E4201 90º side mount w/logo .............. 24.99 ea E4202 30º top mount w/logo ............... 29.99 ea

Signature SeriesSignature Series inscribed breathers come with rubber grommets and match the Signature Series chrome valve covers. Fit any 1-1/4" hole. Note: No further discounts apply.E4403 black powdercoat w/o nipple ... 9.99 ea E4405 chrome w/o nipple .................... 9.99 ea E4410 chrome w/90º nipple ................ 9.99 ea

E4204

ST10061 - bottomST10061 - top

E4405

1977-79 Trans Am Valve Cover BreatherReproduction valve cover breather for 1977-79 Trans Am models with Oldsmobile 403 engine. This breather element fi ts into a valve cover rubber grommet.TA4041 1977-79 .................................... 12.99 ea

Oil/Breather Caps

Chrome Oil CapAftermarket chrome oil caps. Push-in style fi ts 1.25" holes.66018 push-in OIL....................... 3.99 ea 66632 twist-on no logo ................. 7.99 ea D141631 twist-on GM ....................... 14.99 ea

ST10066ST10072

ST10077

66018 66632 D141631

ST10099

Replacement Oil CapsHigh quality Stant service replacement oil caps in a variety of styles for small block engines.Push-In Style for 1.25" HoleST10072 OIL ......................................... 1.99 ea Twist-on Style with TabsST10066 with ears .................................. 2.99 ea ST10077 ENGINE OIL FILL ....................... 1.99 ea 1996-02 Plastic 1-17/32" Cam TwistST10099 with o-ring ............................... 4.99 ea 1989-92 Plastic 1-9/32" ThreadedST10105 ................................................. 3.99 ea

1977-79 Trans Am Oil Filler CapReproduction oil fi ller cap for 1977-79 Trans Am models with 403ci Olds V8 engines. TA4061 1977-79 Olds 403 .................. 16.99 ea

1253505

1968-79 Replacement AC Oil CapsFactory-correct reproduction AC oil fi ll caps. Chrome cap features 3-spot welds and AC in center as original. 1253505 1968-79 chrome ..................... 34.99 ea 1253506 1968-79 FC2, paint to match . 34.99 ea

1967-02 Oil Filler CapAC Delco replacement oil fi ller cap for use with all 1967-02 Firebird models with closed emission engines. This is a factory service replacement part which may very in appearance from the original. Twist on style.G7220 1967-69 ................................. 10.99 ea G7220 1977-79 ................................. 10.99 ea G7220 1982-84 305-H ....................... 10.99 ea G7220 1983 305-7 ....................... 10.99 ea G9103 1985-86 2.5 ............................ 12.99 ea G7220 1987-92 5.0, 5.7, 305-H ........ 10.99 ea G11513 1998-02 5.7 LS1 .................... 7.99 ea

G7220

1987-02 Screw In Oil CapsWhether your oil cap is lost or broken or the engine compartment just needs something to spice it up, these oil caps are perfect. Fits most 1987-02 GM valve covers with a screw in style cap. Available in chrome plated plastic or polished and chrome plated billet aluminum. 96961 chrome plated plastic ............... 3.99 ea 96962 polished billet aluminum .......... 14.99 ea 96963 chrome plated billet aluminum 14.99 ea

96963

Oil/Breather Caps

En

gin

es &

Co

mp

on

en

ts

444

KK


Valve Cover Gaskets/Hardware

VCS3001

VCS3002

Aluminum Valve Cover SpacersAluminum valve cover spacers are used with any Pontiac or small block Chevrolet valve cover to give an additional 1" of rocker arm clearance. Pontiac 301-455VCS3001 polished aluminum ............. 110.99 pr VCS3002 black ................................... 99.99 pr Chevrolet Small BlockVCS2001 polished aluminum ............. 89.99 pr VCS2002 black ................................... 89.99 pr

Valve Cover Gaskets

Pontiac 301-455 Valve Cover GasketThese replacement valve cover gaskets are for use with 301-455 V8 engines. Although these are not an original GM gaskets, they will replace your original exactly and offer years of use. Not for use with Super Duty or Ram Air models. T4334 .................................................. 19.99 pr

1970-76 L6 Valve Cover GasketOriginal GM replacement L6 gasket for use on the 1970-76 Firebird models with the power effi cient engine. G8380 1970-76 L6 ........................... 10.99 ea

Chevrolet Valve Cover GasketsValve cover gaskets are now available in your choice of original cork material or a variety of aftermarket materials. Small Block 305-350 ciG7221 1977-86 cork (GM) 2 req ........ 23.99 ea T4323 1977-86 reproduction .............. 12.99 pr 80608 1987-92 rubber (OER) 2 req ... 19.99 ea

T4323

Valve Cover Hold Downs & Wire LoomsThese innovative valve cover hold downs are ideal to prevent leakage for stamped small block Chevy valve covers. They are easy to install and by applying even pressure on the entire mounting fl ange, they’ll eliminate the possibility of leaks. Hold downs with wire looms also offer the advantage of attached spark plug wire looms for an ultra-clean engine compartment. Your choice of with or without looms in a variety of colors.With Spark Plug Wire Looms66292C chrome ...................................... 54.99 pr 66292B blue ........................................... 54.99 pr 66292K black ......................................... 54.99 pr 66292R red ............................................. 54.99 pr Without Spark Plug Wire Looms66291C chrome ...................................... 34.99 pr 66291B blue ........................................... 34.99 pr 66291K black ......................................... 34.99 pr

66292R

T4936 66006

66038 66650

Valve Cover Bolt SetThese reproduction valve cover bolts are for use on all Pontiac engines. Available in chrome or zinc fi nish.F6510 5/16"-18 x 9/16" chrome, 8 bolts 16.99 set F6511 5/16"-18 x 21/32" zinc, 8 bolts ... 16.99 set T9423 5/16"-18 x 1" chrome, 4 bolts ..... 3.99 set

F6510

1967-97 Valve Cover Bolt SetThe Pontiac Arrowhead logo is stamped directly onto the head of the bolts. They are available in decorative chrome plated or polished stainless steel versions.

PontiacChrome56466CA 1967-79 5/16"-18 x 9/16" ...... 14.99 set 56463CA 1978-87 1/4"-20 x 1/2" .......... 9.99 set Stainless Steel 56466SA 1978-87 1/4"-20 x 7/8" .......... 6.99 set

LT-1 engineStainless Steel 56403SA 1993-97 1/4"-20 x 3.5" .......... 19.99 set Center Hold Down Valve Cover Bolts

Purchase a replacement set or individual bolt and washer for center hold-down valve covers.Note: All bolts and sets include washer.Bolts w/Washer141133 1987-97 bolt set, repro ................ 14.99 set G9101 1987 ...................................... 2.99 ea G9101 1988-92 5.0-E.............................. 2.99 ea G8378 1988-92 5.0-F (LB9), 5.7-8 (L98) 3.25 ea G9101 1993-97 LT1 ................................ 2.99 ea WashersG8379 1986-87 5.0-F, 5.7 ....................... 4.89 ea

1977-86 Valve Cover BoltsOriginal GM valve cover retaining hardware for Firebird models with small block Chevrolet engines.G8374 1977-86 1/4"-20 x 9/16" bolt ... .99 ea G8376 1977-86 spreader bar ................ 8.99 ea G8377 1977-86 1/4"-20 x 1-1/4" stud .. 3.99 ea G1649 1977-86 1/4"-20 nut w/washer . 4.99 ea

G8374G8377

Valve Cover Bolt SetsThese 8 piece bolt sets are offered for Chevrolet small block engines in a choice of chrome moly steel with a black oxide fi nish or corrosion-proof polished stainless steel. Choose between conventional hex head bolts and washers or compact, easy access 12-point designs. The heads feature a wide base for better load distribution and sealing (helps prevent those pesky gasket leaks), while the compact head is easily accessed. All sets are shipped with the required fl at washers and come with 1/4"-20 bolts except for the center bolted valve covers.For Cast Aluminum CoversAR1757 black oxide hex head ............ 11.99 set AR1753 black oxide 12-point ............. 11.99 set AR4757 stainless hex head ............ 19.99 set AR4753 stainless 12-point ............. 22.99 set For Stamped Steel CoversAR1755 black oxide hex head ............ 12.99 set AR1751 black oxide 12-point ............. 12.99 set AR4755 stainless hex head ............ 18.99 set AR4751 stainless 12-point ............. 21.99 set For 350 Chevy Center Bolted CoversAR1759 black oxide hex head ............ 19.99 set AR1760 black oxide 12-point ............. 23.99 set AR4759 stainless hex head ............ 29.99 set AR4760 stainless 12-point ............. 29.99 set G9240

56466SA head detail

T9067T9641

141133 G8379

Valve Cover Hold DownsRegulates the pressure on the valve cover and prevents leakage. Available in mini-tab form, which is excellent for use in tight clearance locations.T9641 4 piece, 4-1/2" wide ................. 9.99 set T9067 4 piece, mini-tab hold downs ... 5.99 set G9240 6 cylinder, 6 required ............... 3.99 ea

1977-79 Trans Am Valve Cover BoltsReproduction valve cover bolts for 1977-79 Trans Am with 403ci Oldsmobile engine.Note: Due to variations in Oldsmobile cylinder heads only fi ve bolts per valve cover may be required.TA4034 1977-79 20 piece ................... 21.99 set

Valve Cover Hold Down NutsVarious styles of chrome hold down bolts sold in sets of 4 pieces.T-Bar Wing Nuts 66005 3-1/2" tall, 1/4"-20 studs .......... 9.99 set T4936 5" tall, 1/4"-20 studs ................. 12.99 set Chrome Wing Nuts 41371 3-1/2" tall, 1/4"-20 ................... 8.99 set 41381 3-1/2" tall, 5-16"-18 ................. 8.99 set Deluxe Wing Nuts 66006 4" tall, 1/4"-20 studs ................. 9.99 set 66036 4" tall, 5/16"-18 studs ............... 13.99 set Mini Nuts 66038 1/4"-20 studs ............................ 8.99 set 66650 stainless steel washers, 1/4"-20 9.99 set

AR1757

KK

En

gin

es &

Co

mp

on

en

ts

445

1967-85 Pontiac/Olds Performer RPM Intake ManifoldsPerformer RPM manifolds are dual-plane, high-rise intake manifolds with a 180˚ fi ring order to produce incredible top end horsepower while retaining good throttle response. Their larger plenums and runners match the free-fl owing exhaust, and high lift cams and other modifi cations of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 RPM. Not intended for emissions controlled vehicles. A Performer RPM will give you the ultimate in street high-performance. Available with EnduraShine™ fi nish!Important: Modifi cations necessary for vehicles with Trans Am Shaker Hood.Note: No further discounts apply.

Performance Intake Manifolds

Performance ProductsWe offer several different styles of Edelbrock aluminum intake manifolds to fi t a variety of applications. Each style of manifold has characteristics that make it ideal for the application for which it was intended. Years of design and testing in the area of induction technology have given valuable insights into which characteristics

Performer Manifold 1967-85 Olds 350 & 403Designed for street 1967-85 350 and 403 Oldsmobile V8s. This manifold is a stock replacement/street legal part for 1967-72 350 and 403 V8s with 4 bbl and without stock EGR or 1972-85 350 and 403 with stock EGR except 1976 with back pressure EGRs. Includes EGR block-off plate for non-EGR applications. This manifold will clear H.E.I. distributors. Use stock or replacement spread bore carburetors only. E3711 1967-85 EGR/non-EGR ................................................ 294.99 ea E8514 1967-79 intake manifold bolt set .................................. 24.99 set

work best under what conditions. Whether you’re building a daily driver, ultra high-performance street machine, or race car an Edelbrock intake manifold will provide the power right where you want it.

Performance Intake Manifolds

Performer RPM Manifold 1967-85 Olds 350 & 403Designed for street 1967-85 350 and 403 Oldsmobile V8s. The Performer RPM Olds manifold is a high-rise dual plane design with 180º fi ring order engineered for maximum top-end horsepower while maintaining excellent throttle response. Port fl ange has extra material above the runner for use with Olds 455 heads. This manifold will clear H.E.I. distributors. Carburetor pad will accept square bore or spread bore carbs without an adapter. E7111 1967-85 non-EGR ......................................................... 304.99 ea E8514 1967-79 intake manifold bolt set .................................. 24.99 set

Performer Manifolds 1967-79 Pontiac 326-455 V8Designed for 1967-79 326-455 Pontiac V-8s. (except Ram Air IV). Will not fi t 265 or 301 Pontiac engines. Provides great throttle response and torque for performance you can feel. E2156 is a stock replacement/street legal part for 1962-72 326, 350, 389, 400, and 455 with 4 bbl carburetors and without stock EGR. E3756 is a stock replacement for 1973-79 326, 350, 389, 400 and 455 with 4 bbl carb and stock EGR. This manifold will clear H.E.I. distributors. Use stock or replacement spread bore carburetors only. E2156 1967-79 non-EGR ............................................................ 274.99 ea E3756 1967-79 w/EGR port ........................................................ 309.99 ea E8559 1967-79 intake manifold bolt set ..................................... 15.99 set

1967-85 Pontiac/Olds Performer Intake ManifoldsPerformer manifolds are dual-plane, low-rise intake manifolds with a 180˚ fi ring order and patented runner design that you won’t fi nd on other brands. This patented design greatly improves torque over a wide RPM range, especially off-idle through the mid-range. Throttle response is excellent. Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles, and RVs. There are EGR and non-EGR versions available for most GM V8s. Most performer intakes are 50-State street legal when used with the correct carburetor and in the correct application.Important: For Trans Am use stock carburetor for shaker hood clearance. Note: No further discounts apply.

389-455 Pontiac Performer RPM ManifoldThis Performer RPM manifold and carburetor set for 389-455 Pontiacs makes it easy to upgrade your induction system with the best combination of Edelbrock performance in one simple box. The RPM Performer delivers the ultimate street performance from 1500 to 6000 RPM. This set features show quality Edelbrock manifold with Endurashine fi nished, Edelbrock Thunder AVS 800 CFM carburetor with Endurashine fi nished, a chrome fuel inlet, high-quality intake gasket set, Gasgacinch gasket sealer, intake bolt set and carburetor stud set.Important: Modifi cations necessary for vehicles with Trans Am Shaker Hood.Note: No further discounts apply.E20564 EnduraShine fi nish .......................................................... 1124.99 set

Performer RPM Manifold 1967-79 Pontiac 326-455 V8Designed for 1967-79 326-455 Pontiac V8s (except Ram Air IV). Will not fi t 265 or 301 Pontiac engines. Provides maximum high RPM power while maintaining good throttle response for street applications. Recommended for high performance street or strip. This manifold will clear H.E.I. distributors. Carburetor pad will accept square bore or spread bore carbs without an adapter. E7156 1967-79 non-EGR, natural fi nish .................................. 269.99 ea E71564 1967-79 non-EGR, EnduraShine™ fi nish ...................... 414.99 ea E8559 1967-79 intake manifold bolt set .................................. 15.99 set

E2156 E3711 E71564

Pontiac P-65 Dual-Quad ManifoldDesigned for 1965-79 326-455 Pontiac V8s. (except Ram Air V) These P-65 dual quad manifolds are a direct reproduction of the original Edelbrock Pontiac P-65 manifold, delivering classic edelbrock performance from off-idle to 5,500 rpm. Bosses at the rear of the manifold accommodate brake booster, accessory brackets, and throttle linkage. The fl anges match the ports on the Edelbrock Performer RPM Pontiac cylinder heads for proven performance.E5450 Pontiac P-65 non-EGR ..................................................... 381.99 ea E54501 Pontiac P-65 non-EGR, polished ...................................... 584.99 ea

E5450

En

gin

es &

Co

mp

on

en

ts

446

KK

Toll Free Order Line 800.854.1280Performance Intake Manifolds

Intake Manifolds

Edelbrock PerformerDual-plane, low-rise intake manifolds with a 180˚ fi ring order and patented runner design. Improves torque over a wide RPM range, especially from off-idle through the mid-range. There are EGR and non-EGR versions available for most GM V8s, and most intakes are 50-state street legal when used with the correct carburetor and on the correct application. Note: No further discounts apply.

1977-86 Chevrolet Small BlockImportant: Will also fi t 1987 and later stock aluminum cylinder heads. Will not fi t Chevrolet Bow Tie cast iron cyl. headsNatural FinishE2101 non-EGR ................................. 174.99 ea E3701 with EGR ................................. 219.99 ea

1987-95 Small Block w/Cast Iron HeadsImportant: Not for 1987 and later stock aluminum cylinder heads. Will not fi t Chevrolet Bow Tie or LT1 cylinder heads.Natural FinishE2104 non-EGR ................................. 219.99 ea E3706 with EGR ................................. 259.99 ea 1996-up Small Block w/Iron Vortec Heads

Important: Will also fi t Edelbrock E-Tec heads. Natural FinishE2116 non-EGR ................................. 219.99 ea Endurashine FinishE21164 non-EGR ................................. 369.99 ea

Edelbrock Performer EPSRunner design that is tuned for peak power around 3500 RPM on a Chevrolet 350 V8, and has a solid power range off idle to 5500 RPM.Important: Not for 1987 and later cast iron Chevrolet Bow Tie cylinder heads. Will fi t 1987 and later stock aluminum cylinder heads. Note: No further discounts apply.Natural FinishE2701 non-EGR ................................. 144.99 ea Endurashine FinishE27014 non-EGR ................................. 274.99 ea

E7101

Edelbrock Performer RPMDual-plane, high-rise intake manifolds with a 180˚ fi ring order to produce incredible top end horsepower while retaining good throttle response. Their larger plenums and runners match free-fl owing exhaust, and high lift cams and other modifi cations of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 RPM. Not for emissions controlled vehicles.Note: No further discounts apply.

1977-86 Chevrolet Small BlockImportant: Will fi t cast iron Chevrolet Bow Tie cylinder heads, but will not fi t 1987 and later cast iron cylinder heads.Natural FinishE7101 non-EGR square bore ........ 199.99 ea E7104 non-EGR spread bore ........ 221.99 ea Endurashine FinishE71014 non-EGR square bore ........ 341.99 ea 1996-up Small Block w/Iron Vortec Heads

Important: Will also fi t Edelbrock E-Tec heads. Natural FinishE7116 non-EGR .......................... 229.99 ea Endurashine FinishE71164 non-EGR .......................... 371.99 ea

E2104

E2601

E75014

Edelbrock Performer Air-GapThis award winning design incorporates the same race winning technology that’s been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil, resulting in a cooler, denser intake charge that delivers more power. Performer Air-Gap manifolds are ideal for street performance from idle to 5500 RPM. Note: No further discounts apply.

1977-86 Chevrolet Small BlockNatural FinishE2601 non-EGR ................................. 251.99 ea Endurashine FinishE26014 non-EGR ................................. 384.99 ea

Edelbrock Performer RPM Air-GapThis award winning design incorporates the same race winning technology that’s been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil, resulting in a cooler, denser intake charge that delivers more power. RPM Air-Gap manifolds are modeled after Performer RPM intakes for street power from 1500 to 6500 RPM.Note: No further discounts apply.

1977-86 Chevrolet Small BlockNatural FinishE7501 non-EGR ................................. 261.99 ea Endurashine FinishE75014 non-EGR ................................. 394.99 ea 1996-up Small Block w/Iron Vortec Heads

Important: Will also fi t Edelbrock E-Tec heads. Natural FinishE7516 non-EGR ................................. 299.99 ea Endurashine FinishE75164 non-EGR ................................. 424.99 ea

E27014

E20684

Edelbrock RPM Dual-Quad Air GapRPM Air-Gap manifolds are ideal for street performance from idle to 5500 rpm. The full set up provides everything you need to run dual quads, including an RPM Air Gap Dual Quad intake manifold for oval port heads, (2) 500 CFM Thunder Series AVS carburetors (one manual choke, one electric choke), throttle linkage, fuel line and intake gasket set for a complete installation. Manifold also available separately. Choose from satin cast fi nish or chrome-like Endurashine fi nish.Note: Complete set-ups are shipped overweight. No further discounts apply.

Complete Set Up

1977-86 Small Block E2025 265-400 natural .................. 1219.99 set E20254 265-400 Endurashine ......... 1544.99 set 1996-up Small Block w/Iron Vortec HeadsImportant: Will also fi t Edelbrock E-Tec heads. E2026 262-400 natural .................. 1231.99 set E20264 265-400 Endurashine ......... 1574.99 set

Manifold Only1977-86 Chevrolet Small Block E7525 265-400 natural .................. 331.99 ea E75254 265-400 Endurashine ......... 499.99 ea 1996-up Small Block w/Iron Vortec HeadsImportant: Will also fi t Edelbrock E-Tec heads. E7526 265-400 natural .................. 331.99 ea E75264 265-400 Endurashine ......... 499.99 ea

Performer EPS Vortec ManifoldAvailable for small-block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. The runner design is “tuned” for peak torque around 3500 rpm on a 350-inch engine and it’s ideal for off-idle through 5500 rpm. Dyno tests showed gains averaging 5+ ft/lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains.Note: No further discounts apply.Natural FinishE27161 Vortec, natural fi nish ............... 229.99 ea Endurashine FinishE27164 Vortec w/EnduraShine fi nish ... 354.99 ea

E27161

KK

En

gin

es &

Co

mp

on

en

ts

447Reproduction Intake Manifolds

1969 Ram Air Intake Manifold SetThis intake manifold set features a reproduction of the factory aluminum intake manifold that came on 1969 Firebird / Trans Am cars with 400 Ram Air IV engine. It will also work on all 1965-79 Pontiacs with a 326, 350, 389, 400, 428 and 455 engines, but is correct for 1969. It has cast number of 9796614 and has the correct “W” snowfl ake logo which was used by Winters foundry. Set includes one aluminum intake manifold, one cast iron exhaust crossover and the correct factory two-piece crossover heat shield which insulates the intake manifold from heat produced by the crossover.Note: Use intake manifold gasket # 1233.14424 1969 ....................................... 569.99 set

1969-70 400 Ram Air IV Intake ManifoldThis is a reproduction of the factory aluminum intake manifold that came on 1969-70 Firebird / Trans Am cars with 400 Ram Air IV engine. It will also work on all 1965-79 Pontiacs with a 326, 350, 389, 400, 428 and 455 engines. It has a cast number and the correct “W” snowfl ake logo which was used by Winters foundry.Note: Use intake manifold gasket # 1233.14420 1969 cast # 9796614 ........... 359.99 ea 14421 1970 cast # 9799084 ........... 359.99 ea

1971-72 455 H/O Intake ManifoldThis is a reproduction of the factory aluminum intake manifold that came on 1971-72 Firebird / Trans Am cars with 455 H/O engine. It will also work on all 1965-79 Pontiac 326, 350, 389, 400, 428 and 455 engines. It has a cast number and has the correct “W” snowfl ake logo which was used by Winters foundry.Note: Use intake manifold gasket # 1233.14422 1971 cast # 483674 ............. 359.99 ea 14423 1972 cast # 485640 ............. 359.99 ea

Intake Manifolds

14422

14420

144231970 Ram Air Intake Manifold SetThis intake manifold set features a reproduction of the factory aluminum intake manifold that came on 1970 Firebird / Trans Am cars with 400 Ram Air IV engine. It will also work on all 1965-79 Pontiac 326, 350, 389, 400, 428 and 455 engines, but is correct for 1970. It has cast number of 9799084 and has the correct “W” snowfl ake logo which was used by Winters foundry. Set includes one aluminum intake manifold, one cast iron exhaust crossover and the correct factory two-piece crossover heat shield which insulates the intake manifold from heat produced by the crossover.Note: Use intake manifold gasket # 1233.14425 1970 ....................................... 569.99 set

1971 H/O Intake Manifold SetThis intake manifold set features a reproduction of the factory aluminum intake manifold that came on 1971 Firebird / Trans Am cars with 455 H/O engine. It will also work on all 1965-79 Pontiac 326, 350, 389, 400, 428 and 455 engines, but is correct for 1971. It has cast number of 483674 and has the correct “W” snowfl ake logo which was used by Winters foundry. Set includes one aluminum intake manifold, one cast iron exhaust crossover and the correct factory two-piece crossover heat shield which insulates the intake manifold from heat produced by the crossover.Note: Use intake manifold gasket # 1233.14426 1971 ....................................... 569.99 set

1969-71 Ram Air Intake CrossoverReproduction Ram Air intake crossover used on 1969-71 Pontiac models equipped with the optional Ram Air package. This air intake crossover mounts between the heads and under the intake to provide heat for the carburetor choke thermostat coil. This cast iron crossover is used on all Ram Air aluminum or H/O intakes.14403 1969-71 ................................... 156.99 ea

1969-71 Ram Air and H/O Crossover CoverThis is a reproduction of the cover that fi ts all Pontiac 400 or 455 motors with aluminum intake and a cast iron crossover. This cover surrounds the intake crossover and directs heat away from the intake manifold.F871 1969-71 ................................... 109.99 set

1967-79 Intake Manifold GasketsThis is a reproduction of the original intake manifold gasket Pontiac used on V8 engines from 1967-79. This gasket can be used on 326-455 engines.1233 1967-79 V8 ............................ 24.99 set

1977-97 Intake Manifold GasketsHigh-quality intake manifold gaskets for V6 and small block engines. Produced by OE manufacturers from premium non-asbestos materials to meet or exceed original specifi cations.Note: For Chevrolet/GM corporate engines only.V6 Models 43150 1982-86 2.8L Carb ........ 11.99 set 41520 1985-95 2.8-3.4L FI ............ 12.99 set Small Block Models 43221 1977-86 305-350 ci ................ 11.99 set 43226 1985-92 305-350 ci TPI .......... 28.99 set 43230 1987-92 305-350 ci TBI ......... 14.99 set 43670 1993-97 350 ci LT1 ................ 15.99 set

BK5005

43230 1997-04 BBK LS1 & LS6 Intake ManifoldBoost horsepower and low end torque with this intake manifold from BBK. Designed for LS1 and LS6 engines, this intake improves the Z06 Corvette intake design with an 85mm straight through throttle inlet with rounded low-restriction intake runners to allow an 18-24 horsepower increase on a base LS1 engine. Features a titanium powder coat fi nish and is available in sets with BBK Power Plus series 80mm throttle bodies with cable or electronic throttle controls. Uses factory rubber o-ring gaskets and includes mounting hardware and instructions. BK5004 1997-04 manifold only .......... 499.99 ea BK5005 1997-04 w/cable throttle body 799.99 set BK5006 1997-04 w/elec. throttle body . 799.99 set

En

gin

es &

Co

mp

on

en

ts

448

KK

Toll Free Order Line 800.854.1280Intake Manifold Components

1973-74 Super Duty Valley Pan PlugTrans Am Super Duty valley pan plug. This black plug is required to close-off the hole in the valley pan of Trans Am Super Duty engines.1253512 1973-74 ................................ 21.99 ea

1967-72 Intake Manifold FittingIntake manifold to air cleaner vacuum fi tting for Pontiac models. This fi tting mounts on the front of the manifold and allows the air cleaner vacuum pod to open under vacuum to allow warm air into the air cleaner to warm up the engine faster and to close at no vacuum.1253524 1967 all ............................. 8.99 ea 1253519 1968-72 V8, all ...................... 14.99 ea

1970-78 Trans Am Engine Check ValveReproduction engine check valve for 1970-78 Trans Am models. This valve prevents vacuum from escaping the booster when the engine shuts off, allowing you to stop safely in the event of an unexpected stall.1253508 1970-78 .................................... 11.99 ea

1977-79 Trans Am Intake Manifold PlugsReproduction intake manifold plugs for 1977-79Trans Am with 403ci Oldsmobile engine.TA4029 1977-79 4 piece set ................ 8.99 set

1977-79 Trans Am Engine Lift BracketReproduction engine lift bracket installed on the assembly line on the 403ci engine of all 1977-79 Trans Am models to help maneuver the engine into position while building the car.TA4030 1977-79 .................................... 17.99 ea

1967-77 Vacuum PlugsVacuum plugs for 1967-77 Pontiac models. Available in 3/16" and 1/8".TA4063 1967-77 4 piece 3/16" ............ 3.99 set TA4064 1967-77 4 piece 1/8" .............. 3.99 set

1967-81 Firebird Vacuum Check ValveReproduction vacuum check valve for 1967-81 Firebird and Trans Am models equipped with AC. Check valve mounts on the vacuum tree on the intake manifold.TA4067 1967-81 .................................... 13.99 ea

1976 Intake Vacuum Hose SetThis vacuum hose set fi ts all Pontiac V8 engines with a 4 barrel carburetor and includes all the hoses for the intake and the carburetor. They are pre-cut to the proper length and color striped as original.PYE76 1976 .......................................... 84.99 set

1978-97 Intake Manifold Bolt SetsThese bolts have a Pontiac Arrowhead logo stamped directly onto the head of the them. Available in decorative chrome plated or polished stainless steel versions.Chrome56469CA 1978-87 Chevy small block ... 21.99 set 56402CA 1993-97 LT-1 engine ............. 24.99 set Stainless Steel56469SA 1978-87 Chevy small block ... 14.99 set 56402SA 1993-97 LT-1 engine ............. 19.99 set

1968-81 Valley Pan PCV GrommetThe valley pan PCV grommet for 1968-81 Pontiac engines was discontinued by GM long ago. Aftermarket grommets were often incorrectly sized and made from the wrong type of rubber. This new reproduction is available in the correct size and the correct rubber that won't disintegrate, soften, or swell. A8700195 1968-81 ................................ 4.99 ea

1967-79 Valley Pan BoltsThese bolts secure the valley pan to the engine block on 1967-79 Pontiac engines. Bolts feature the correct head markings and colors. Sets include fl at washers. A8700196 1967-79 ................................ 8.99 set

1970-72 Ram Air IV And HO Intake Bolt SetCorrect bolt set for aluminum intake manifolds installed on 1970-72 Pontiac RA IV and HO models. This set contains the correct style hardware with factory markings for mounting the intake manifold the cast iron crossover tube. A8700188 1970-72 ................................ 37.99 set

1969-70 RA IV And HO Crossover BoltsThese bolts replace missing or damaged crossover bolts on 1969-70 RA IV and HO Pontiac engines. Bolt sets come complete with the correct markings on the bolts and the correct 1/4" thick washers. A8700189 1969-70 ................................ 17.99 set

1970-79 Intake Manifold Bolt SetThis manifold bolt set contains the correct bolts, nuts and washers to mount the manifold and accessory brackets on 1970-79 Pontiac engines. All bolts feature correct factory style markings. A8700190 manifold bolt set .................. 25.99 set A8700191 studded manifold bolt w/nut 3.99 ea

A8700190

1968-71 Manifold Vacuum Switch HosesThese manifold vacuum switch hose sets are designed for ported vacuum emissions systems. These hoses feature correct colored stripe markings to provide an authentic replacement for worn or missing hoses. Includes installation instructions. A8700100 1968 4 bbl V8 AT/MT ..... 49.99 set A8700101 1969 HO V8 AT/MT ........ 35.99 set A8700101 1971 HO V8 AT/MT ........ 35.99 set

A8100100

1968-71 Thermostatic Vacuum SwitchReproduction thermostatic vacuum switch for various 1968-71 Firebird models with ported vacuum emissions system. This switch opens and closes vacuum ports at specifi c coolant temperatures to control the distributor's vacuum advance and retard systems and controls the vacuum operated shift modulator on some automatic transmission models.5 Port Vacuum Switch PY375 1968 AT/MT 4bbl................. 64.99 ea PY375 1969 AT ................................ 64.99 ea PY375 1971 AT/MT HO .................. 64.99 ea 3 Port Vacuum Switch PY376 1969 switch MT ................... 61.99 ea

PY376PY375

Intake Manifold Components

1969 Ram Air IV Intake Manifold Bolt SetFactory-correct Firebird Ram Air IV intake manifold stud/nut set. Ram Air vehicles with the aluminum intake and the cast iron crossover used large washer and fl at head bolt to bolt the crossover in.1253534 1969 Ram Air IV .............. 26.99 set

1977-79 Trans Am Intake Manifold BoltsReproduction intake manifold bolt set for 1977-79 Trans Am models with 403ci Oldsmobile V8 engine. This 24-piece set will mount your intake as original.TA4015 1977-79 24 piece set .............. 41.99 set

1253524 1253519

KK

En

gin

es &

Co

mp

on

en

ts

449

1967-79 Pontiac V8 Performer RPM HeadsPatterned after the 1969-70 Ram Air IV Pontiac cylinder head. Produces outstanding horsepower with excellent low speed torque and throttle response. 87cc combustion chambers are designed to maximize performance with low octane fuel and streetable compression ratios. The 72cc version is for higher compression engines. 5/8" deck for durability and head gasket retention.Important: Bolt set # E8556 fi ts Edelbrock heads manufactured before 3/15/02, #E8549 fi ts Edelbrock heads manufactured after 3/15/02.*50-state legal (E.O. #D-215-33)Note: Shipped overweight. No further discounts apply.E60579* 1967-79 389-455, 87cc ...................................................... 2089.99 pr E60599 1967-79 389-455, 72cc ...................................................... 2089.99 pr E8556 1967-79 Pontiac head bolt set (for Edelbrock heads only) 121.99 set E8549 1967-79 Pontiac head bolt set (for Edelbrock heads only) 129.99 set

1967-79 Oldsmobile V8 Performer RPM HeadsDesigned for non-emission high performance Olds V8. The 77cc combustion chambers increase the quench area for a more effi cient burn, outstanding horsepower, and torque. Heads are assembled with stainless steel valves, hardened ductile iron valve seats, phosphor bronze guides. The valvetrain has been upgraded from the factory pedestal mount system to an ARP 7/16” screw in stud and 3/8” guideplates for increased valvetrain stability. High-velocity, factory location ports feature 188cc intake ports and 106cc raised-fl oor exhaust ports for more fl ow. Requires Edelbrock E7111 intake manifold. Port matching required.Important: Aftermarket 7/16" stud rocker arms and 3/8" hardened pushrods are required.Note: Shipped overweight. No further discounts apply.E60519 1967-79 350-403, 77cc ..................................................... 1804.99 pr E8558 1967-79 Oldsmobile head bolt set (Edelbrock heads only) 124.99 set

1967-79 Performer Heads w/D-Port ExhaustDesigned for 1967-79 389, 400, 421, 428 and 455 cid V8 Pontiac engines with a 4.060" or larger bore. Available in three dual quench combustion chamber sizes, including 65cc, 72cc, and 87cc; the 72cc combustion chambers provide a 9.5:1 compression ratio when used in conjunction with fl at-top pistons. Features: 2.11" intake and 1.66" Exhaust valve sizes, 1.77" valve will fi t in the exhaust seat insert. Fully CNC Ported 72cc or 87cc Combustion Chamber, or As-Cast 65cc Chamber. Heads sold individually.Important: These heads are for 4.060" and larger bore sizes; 350 c.i.d. engine may require notching the block for valve clearance. Three head bolt bosses are raised higher than the standard D-port heights and will require head bolt kit #E8561 to install these heads. The E61539 heads are available as bare heads only.Note: Shipped overweight. No further discounts apply.

E61539 1967-79 65cc bare head only ............................................. 899.99 ea E61599 1967-79 72cc complete head ............................................. 1199.99 ea E61579 1967-79 87cc complete head ............................................. 1199.99 ea E8561 1967-79 Pontiac head bolt set (for Edelbrock heads only) 124.99 set

E61599

E60519

60859

1977-86 Small Block Performer HeadsDesigned for 1977-86 small block Chevys, these heads have the same powerful design and combustion chambers as the straight plug Performer RPM heads plus an exhaust crossover passage for emissions equipment compatibility. These are 50-state street legal heads. Performer heads with 64cc combustion chambers improve performance and retain stock compression ratio on 1970 and earlier small blocks. Hardened pushrods required. Important: When using hot air choke carburetors and Performer manifolds with these heads, choke kit E1932 is required. When using stock rockers on these heads .100" longer pushrods are required. These heads may not be used on engines with less than 4" bore except with cams having less than .450" valve lift. Note: Shipped overweight. No further discounts apply.

60759 1977-86 70cc chambers ..................................................... 739.99 ea E60759 1977-86 70cc chambers ..................................................... 1379.99 pr 60909 1977-86 64cc chambers ..................................................... 739.99 ea E60909 1977-86 64cc chambers ..................................................... 1389.99 pr E1932 1977-86 choke kit .............................................................. 54.99 set E8550 1977-86 SB head bolt set (for Edelbrock heads only) ....... 119.99 set

1987-95 SB Performer Centerbolt Heads Designed for 1987-95 5.7L Chevy engines (except LT-1, LT-4, and LT-5) originally equipped with centerbolt valve covers and the 1987 and later intake manifold bolt pattern. The high velocity intake runner is designed to work with either T.B.I. or T.P.I. systems. The 60cc combustion chambers maintain stock compression ratio when used with the recommended gaskets. These are 50-state street legal heads. Hardened pushrods required Available in straight plug confi guration only. Important: When using stock rockers on these heads .100" longer pushrods are required. These heads may not be used on engines with less than 4" bore except with cams having less than .450" valve lift. Note: Shipped overweight. No further discounts apply.60859 1987-85 60cc chambers ..................................................... 771.99 ea E60859 1987-85 60cc chambers ..................................................... 1424.99 pr E8550 1987-85 SB head bolt set (for Edelbrock heads only) ....... 119.99 set

1977-86 SB Performer RPM Heads Designed for non-emissions 1977-86 small block Chevys. Performer RPM heads with 64cc combustion chambers improve performance and retain stock compression ratio on 1970 and earlier small blocks. Available in straight plug confi guration to clear all types of exhaust headers or in angled plug confi guration. Hardened pushrods required. Important: When using stock rockers on these heads .100" longer pushrods are required. These heads may not be used on engines with less than 4" bore except with cams having less than .450" valve lift.Note: Shipped overweight. No further discounts apply.60739 1977-86 70cc chambers/straight plugs .............................. 719.99 ea E60739 1977-86 70cc chambers/straight plugs .............................. 1339.99 pr 60899 1977-86 64cc chambers/straight plugs .............................. 724.99 ea E60899 1977-86 64cc chambers/straight plugs .............................. 1329.99 pr 60719 1977-86 70cc chambers/angled plugs ................................ 719.99 ea E60719 1977-86 70cc chambers/angled plugs ................................ 1329.99 pr 60999 1977-86 64cc chambers/angled plugs ................................ 719.99 ea E60999 1977-86 64cc chambers/angled plugs ................................ 1339.99 pr E8550 1977-86 SB head bolt set (for Edelbrock heads only) ........ 119.99 set

E60759

E60719

E60579

Edelbrock Cylinder Heads

Cylinder Heads

En

gin

es &

Co

mp

on

en

ts

450

KK

Toll Free Order Line 800.854.1280Comp Cams®

Mild Street™ 301-400ciIdeal for 301-400ci small block engines that require good low speed torque. A great “all around” cam for the daily driver. This is the best cam for the 301ci engine. Works with most stock valve train components. OK to use in applications with overdrive transmissions and high gear ratios. Operating range between 800 to 4800 RPM. Features .425 valve lift, 252° duration.Camshaft only222060A ............................................... 129.99 ea

Cam & lifters-includes camshaft, lifters, instructions & decals.222060B ............................................... 204.99 set

Small set-includes camshaft, lifters, timing chain and gear set, instructions, assembly lube, & decals.222060C ............................................... 234.99 set

Complete set-includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions & decals.222060D ............................................... 349.99 set

Highway Hauler™ 455ciThis cam provides exceptional power and a gas mileage increase, especially on the highway. Good idle and strong mid-range torque coupled with an excellent throttle response make this cam a good choice for the highway driven 455. Good power for the 326-400 as well. Operating range between 1200 to 5200 RPM. Features .440 valve lift, 260° duration.Camshaft only222061A ............................................... 129.99 ea


Small set-includes camshaft, lifters, timing chain and gear set, instructions, assembly lube & decals.222061C ............................................... 234.99 set


Hot Street™ PerformanceOur most versatile cam, it is a great high performance cam for 326-455ci engine. With its noticeable idle and great all around power, it is ideal for daily driven performance vehicles. Provides major power increases with stock converter. Operating range between 1500 to 5500 RPM. Features .454 valve lift, 268° duration.Camshaft only222062A ............................................... 129.99 ea


Small set-includes camshaft, lifters, timing chain and gear set, instructions, assembly lube & decals.222062C ............................................... 234.99 set


The Magnum™ cam is a great cam for high performance driving in street machines. Provides 30-70% more horsepower and a rough and ready to rumble idle. This is the largest cam you can use with a stock torque converter. The Magnum™ will not affect power accessories, but should be used with headers and a 4 BBL. carburetor. This is the perfect cam for cruising. In order to protect your camshaft warranty and for maximum performance benefi t, we

Camshaft only222063A ........................................................................................ 139.99 ea

Cam & lifters-includes camshaft, lifters, instructions & decals.222063B ........................................................................................ 211.99 set

Magnum™ Cams For Your High-Performance Driven Street Machine!recommend replacing lifters with a matched set manufactured by COMP CAMS®. Important: Valve springs must be replaced with the set recommended for the cam. The use of stock or incorrect springs could cause severe engine damage!Note: Magnum™ cams are legal only for off-highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certifi ed to California standards, pre-1968 domestic vehicles certifi ed to federal standards).*May require machining of cylinder heads. No further discounts apply.

Pro Street™ PontiacMagnum™ cams are specifi cally designed for the street enthusiast looking for more power with that pro-street sound. For 326-455ci engines. Hydraulic fl at tappet cam has an operating range of between 1800 to 5800 RPM. For use with lower gear ratios. Provides a mild rough idle and good mid range torque. Features .470 valve lift, 270° duration.

Small set-includes camshaft, lifters, timing chain and gear set, instructions, assembly lube & decals.222063C ........................................................................................ 259.99 set

Complete set-includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions & decals.222063D* ........................................................................................ 414.99 set

High Energy™ Cams for Your Daily Driver!All High Energy™ designs are totally streetable cams. They will produce 10 to 30% more power than a stock cam throughout the RPM range. Each cam has a particular RPM range in which it works best. By selecting the cam that best suits your driving needs, exceptional power increases can be expected.High Energy™ Cams work great for everyday driving without the “bad” side effects normally found with other cams. High Energy™ cams produce more power, are more effi cient, and do not affect the engine’s idle characteristics to the point of making your car undriveable.High Energy™ Cams will not affect any vacuum or power accessories such as power brakes, air conditioning or steering. Important: Mild Street™ & Highway Hauler™ cams may be used with stock valve springs and lifters. However these components must be in good operating condition. In order to prevent engine damage, the Hot Street Performance™ cam must be used with matching set of valve springs from COMP CAMS®. In order to protect your camshaft warranty and for maximum performance benefi t, we recommend replacing stock valve springs and lifters with a matched set manufactured by COMP CAMS®.Note: High Energy™ cams are legal only for off-highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certifi ed to California standards, pre-1968 domestic vehicles certifi ed to federal standards). No further discounts apply.

complete set

Comp Cams for Pontiac Engines

KK

En

gin

es &

Co

mp

on

en

ts

451

Xtreme Energy™ cams are COMP CAMS® newest series of hydraulic cams. They are designed to take advantage of the latest improvements in valve train components and the newest developments in camshaft design. Xtreme Cams can be used in any street or street/strip application where both throttle response and top end horsepower are desired. Increases horsepower from 20-70% over stock.Important: Because these cams use aggressive lobe designs, it is imperative that valve springs, valve locks, retainers, pushrods, lifters, rockers and other related components are matched to the camshaft. We do not recommend the use of stock valve train components with Xtreme Energy™ cams.Note: Xtreme Energy™ cams are legal only for off-highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certifi ed to California standards, pre-1968 domestic vehicles certifi ed to federal standards). No further discounts apply.

Comp Cams®

Street/Strip™ PontiacXtreme Energy™ cams can be used in any street or strip application where both throttle response and top end horsepower are desired. For 326-455ci engines. Hydraulic fl at tappet cam has an operating range of between 1300 to 5500 RPM. Good mid-range with noticeable idle. Features .462 intake valve lift, .470 exhaust valve lift, 262° intake duration, 270° exhaust duration.Camshaft only222064A ........................................................................................................................................ 139.99 ea

Cam & lifters-includes camshaft, lifters, instructions & decals.222064B ........................................................................................................................................ 214.99 set

Small set-includes camshaft, lifters, timing chain and gear set, instructions, assembly lube & decals.222064C ........................................................................................................................................ 244.99 set

Complete set-includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions & decals.222064D ........................................................................................................................................ 359.99 set

Xtreme Street/Strip™ PontiacXtreme Energy™ cams can be used in any street or strip application where both throttle response and top end horsepower are desired. For 326-455ci engines. Hydraulic fl at tappet cam has an operating range of between 1600 to 5800 RPM. Great cam for street machines. Largest cam for stock torque converter. Features .477 intake valve lift, .480 exhaust valve lift, 268° intake duration, 280° exhaust duration.Camshaft only222065A ........................................................................................................................................ 139.99 ea

Cam & lifters-includes camshaft, lifters, instructions & decals.222065B ........................................................................................................................................ 211.99 set

Small set-includes camshaft, lifters, timing chain and gear set, instructions, assembly lube & decals.222065C ........................................................................................................................................ 259.99 set

Complete set-includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions & decals.222065D ........................................................................................................................................ 419.99 set

Factory Muscle!During the heyday of the factory muscle car, Pontiac produced what they thought would be the perfect muscle cars. Model/engine designations like Formula 400, Ram Air, and Trans Am represented the ultimate in trim and performance. But, Pontiac also knew that not everyone could afford one of these factory prepared monsters. Consequently, 80% of the muscle cars offered were equipped with more practical and economical powerplants. You can give your stocker a dose of factory muscle with a Muscle Car™ cam from COMP CAMS®. Designed to replicate the original GM cams of the era, The Muscle Car™ cams produce the power and performance your car missed out on.

Factory 400 or 455ciKnown to GM as part# 9794041, this is COMP CAMS® version of the hydraulic cam that provided 366HP to the 400 in 1968. It was also used in the 400ci in 1969, providing 345/370HP and the 1970 455/370HP. Fits 326-455ci engines. Features .516 lift with 230° intake & 240° exhaust duration. Important: Valve springs must be replaced with the set recommended for the cam. The use of stock or incorrect springs could cause severe engine damage! Note: Depending upon the cylinder heads that you are using, some minor machining may be necessary to fi t the dual valve springs & valve stem seals to the cylinder head. No further discounts apply.Camshaft only222070A ................................................ 129.99 ea

Cam & lifters-includes camshaft, lifters, instructions & decals.222070B ................................................ 204.99 set

Small set-includes camshaft, lifters, double roller timing chain and gear set, instructions, assembly lube & decals.222070C ................................................ 237.99 kit

Complete set-includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions & decals.222070D ................................................ 431.99 kit

small set

Xtreme Energy™ for Street or Strip!

En

gin

es &

Co

mp

on

en

ts

452

KK


Factory Muscle Cams Replicate Original GM Cams of the Era!Give your stocker a dose of factory muscle with a Muscle Car™ cam from COMP CAMS®. Designed to replicate the original GM cams of the era, The Muscle Car Cams™ produce the power and performance your car missed out on. Each set includes camshaft, lifters, assembly lube, instructions & decals.300hp/350ci Factory Muscle Car Cam Known to GM as part# 3896929, this is the hydraulic cam that provided 275/300HP to the 327 from 1965-68. It was also used from 1967-69 in the 350ci providing 295HP. Then in 1970, it was the cam used in the 300HP 350ci Super SportItem # Description GM Item # Adv Dur Lift Price222050B Cam & Lifters 3896929 195˚/202˚ .390"/.410" 199.99 set 222050D Complete set 3896929 195˚/202˚ .390"/.410" 332.99 set 300hp/327ci Factory Muscle Car Cam Referred to by GM as part# 3863151, this is Comp Cams’ version of the hydraulic cam that provided 350HP to the 327 from 1965-68. Item # Description GM Item # Adv Dur Lift Price222051A Camshaft 3863151 222˚ .447" 129.99 ea 222051B Cam & Lifters 3863151 222˚ .447" 199.99 set 222051D Complete set 3863151 222˚ .447" 350.99 set Z28 Solid Lifter Factory Muscle Car Cam This is the solid lifter cam that GM installed in the 67-69 Z28 Camaro’s 302, providing it with 290HP. In 1964-65, it provided the Corvette 327 with 365-375 HP.Item # Description GM Item # Adv Dur Lift Price222052A Camshaft 3849346 254˚ .485" 129.99 ea 222052B Cam & Lifters 3849346 254˚ .485" 229.99 set 222052D Complete set 3849346 254˚ .485" 378.99 set

Comp Cams®

High Energy™ Cams for Your Daily Driver!Cams for Your Daily Driver!

222002 305-350 ci 800-4800 252˚/252˚ .425" 119.99 ea 184.99 set 219.99 set 319.99 set 222003 305-350 ci 1200-5200 260˚/260˚ .440" 119.99 ea 184.99 set 219.99 set 319.99 set 222004 305-350 ci 1500-5500 268˚/268˚ .454" 119.99 ea 184.99 set 219.99 set 334.99 set

Your Choice of Four Convenient Sets to Meet Your Small Block Chevrolet Engine Needs!

All High Energy™ designs are totally streetable cams. They will produce 10 to 30% more power than a stock cam throughout the RPM range. Each cam has a particular RPM range in which it works best. By selecting the cam that best suits your driving needs, exceptional power increases can be expected. High Energy™ Cams work great for everyday driving without the “bad” side effects normally found with other

cams. High Energy™ cams produce more power, are more effi cient, and do not affect the engine’s idle characteristics to the point of making your car undriveable. High Energy™ Cams will not affect any vacuum or power accessories such as power brakes, air conditioning or steering.Note: No further discounts apply.

Important: On Chevrolet small block applications, High Energy™ Cams may be used with stock valve springs and lifters. However these components must be in good operating condition. In

order to protect your camshaft warranty and for maximum performance benefi t, we recommend replacing stock valve springs and lifters with a high performance set from Classic Industries.

A - Camshaft OnlyThe camshaft only set includes camshaft. instructions, assembly lube and decals

B - Cam and LiftersOrder the cam and lifter set to add a

matched set of lifters to your camshaft

C - Small SetOrder the small set for cam and

lifter set plus timing chain and gear

D - Complete SetComplete set includes cam, lifters,

timing chain & gear valve springs and retainers, valve locks, valve stem seals

COMP CAMS for your High Performance Street Machine!The Magnum™ Cam is a great cam for high performance driving in street machines. Provides 30-70% more horsepower and a rough and ready to rumble idle in small block Chevy applications. The Magnum™ will not affect power accessories, but should be used with headers. This is the perfect cam for cruising.

Xtreme Energy™ Cams are Comp Cams® newest series of hydraulic cams. They are designed to take advantage of the latest improvements in valve train components and the newest developments in camshaft design. Xtreme Cams can be used in any street or street/strip application where both throttle response and top end horsepower are desired. Increases horsepower from 20-70% over stock. Note: No further discounts apply.

Complete set - includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions & decals.

Magnum™ CamsItem # Application RPM Range Adv Dur Lift Price222005D 305-350 ci 1800-5800 270˚/270˚ .470" 334.99 set

Xtreme Energy™ CamsItem # Application RPM Range Adv Dur Lift Price222006D 305.350 ci 1300-5600 262˚/270˚ .462"/.469" 294.90 set 222007D 305-350 ci 1600-5800 268˚/280˚ .477"/.480" 329.99 set

Item # Application RPM Range Adv Dur Lift A - Camshaft B - Cam & Lifters C - Small Set D - Complete Set

KK

En

gin

es &

Co

mp

on

en

ts

453Comp Cams®

For Computer Controlled Engines!If you have a late model computer controlled engine, you have to be VERY CAREFUL when selecting a high performance aftermarket cam! The wrong cam could “throw off” the computer, spelling real trouble for your vehicle’s driveability and performance.

Comp Cams® has engineered this line of camshafts specifi cally for these engines, ensuring that you get a camshaft that works WITH your computer, providing exceptional performance and driveability out of your late model Chevy engine!

COMP CAMS for your TBI/Crossfi re or Carbureted Late Model!Designed for use with throttle body, or crossfi re injected and carbureted 305 ci engines. Your choice of 3 kits to suit your specifi c needs, Camshaft only, Cam and lifters or complete set. The complete set includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions & decals. Note: No further discounts apply.Item # Description RPM Range Adv Dur Lift Price222008A Camshaft 1000-5000 252˚/260˚ .425"/.440" 139.99 ea 222008B Cam & lifters 1000-5000 252˚/260˚ .425"/.440" 208.99 set 222008D Complete set 1000-5000 252˚/260˚ .425"/.440" 369.99 set

COMP CAMS for your 1987-98 Tuned Port Injection Engine!Designed for use with TPI 305, 350ci engines (Except LT1 & LT4), This cam is designed for 1987-98 engines originally equipped with hydraulic roller camshaft. Your choice of 3 kits to suit your specifi c needs, Camshaft only, Cam and lifters or complete set. The complete set includes camshaft, lifters, chain set, valve springs, valve spring retainers, valve locks, valve stem seals, assembly lube, instructions &

decals. Applications are available for use with stock computer or modifi ed computer.Important: This cam will not work with stock valve train components. To retain your camshaft warranty and prevent damage to your engine, you must replace the stock components with a matched set from COMP CAMS®.Note: No further discounts apply.

STOCK COMPUTERItem # Description RPM Range Adv Dur Lift Price222009A Camshaft 1000-5000 262˚/264˚ .450"/.480" 284.99 ea 222009B Cam & lifters 1000-5000 262˚/264˚ .450"/.480" 474.99 set 222009D Complete set 1000-5000 262˚/264˚ .450"/.480" 709.99 set

MODIFIED COMPUTERItem # Description RPM Range Adv Dur Lift Price222010A Camshaft 1200-5200 264˚/274˚ .480"/.480" 284.99 ea 222010B Cam & lifters 1200-5200 264˚/274˚ .480"/.480" 474.99 set 222010D Complete set 1200-5200 264˚/274˚ .480"/.480" 709.99 set

Cam and LiftersOrder the cam and lifter set to add a

matched set of lifters to your camshaft

Camshaft OnlyThe camshaft only set includes camshaft. instructions, assembly lube and decals

Complete SetComplete set includes cam, lifters, timing chain & gear valve springs and retainers, valve locks, valve

stem seals

Edelbrock Performer Plus Camshaft KitsDesigned for optimum torque from the low-end to the mid-range, Performer®-Plus camshaft packages match with Performer® manifolds for vehicles operating from idle to 5500 RPM. All camshafts come with hydraulic lifters, assembly lube and instructions. Most Performer® cams are 50 state street legal. Note: No further discounts apply.

Performer Plus Kits for Chevrolet EnginesItem # Year Application Duration Lift PriceE3702* 1987-95 305/350 TBI 194˚/214˚ .398"/.442" 171.99 set E2102* 1977-86 305-350 204˚/214˚ .420"/.442" 161.99 set *Note: These cams are 50 state legal.

Performer Plus Kits for Pontiac EnginesItem # Year Application Duration Lift PriceE2157 1965-79 326-455 204º/214º .420"/.422" 249.99 set

Performer Plus Kits for Oldsmobile EnginesItem # Year Application Duration Lift PriceE3712 1967-84 350/403 204º/214º .448"/.472" 259.99 set

Edelbrock Performer RPM Camshaft KitsDesigned for street high-performance applications, Performer® RPM cams provide power from 1500 to 6500 RPM. These hydraulic lifter camshafts are dyno-matched to Performer® RPM manifolds for high RPM horsepower while maintaining acceptable low-end torque. With 10-12 inches of manifold vacuum at idle, Performer® RPM cams have more lift and duration than most street camshafts. Note: No further discounts apply.

Performer RPM Kits for Chevrolet EnginesItem # Year Application Duration Lift PriceE7102 1977-86 305-350 234˚/244˚ .488"/.510" 204.99 ea

Performer RPM Kits for Pontiac EnginesItem # Year Application Duration Lift PriceE7157 1965-79 326-455 231º/240º .470"/.470" 249.99 set

Performer RPM Kits for Oldsmobile EnginesItem # Year Application Duration Lift PriceE7112 1967-84 350/403 224º/234º .496"/.520" 259.99 set

Edelbrock Rollin' Thunder Performer Plus Chevrolet CamshaftsDesigned for street high-performance applications, Performer® Plus cams provide power from off-idle to 5500 RPM. These hydraulic roller lifter camshafts reduce friction, virtually eliminate break-in problems and permit higher valve velocities for increased performance. Intended for use with OEM or Edelbrock hydraulic roller lifters sold separately. Note: No further discounts apply.Rollin' Thunder Performer Plus Camshafts Item # Year Application Duration Lift PriceE2208 1977-86 305-350 212˚/222˚ .462"/.479" 371.99 ea E2209 1987-99 305-350 212˚/222˚ .462"/.479" 351.99 ea

Edelbrock Rollin' Thunder Performer RPM Chevrolet CamshaftsDesigned for street high-performance applications, Performer® RPM cams provide power from 1500 to 6500 RPM. These hydraulic roller lifter camshafts reduce friction, virtually eliminate break-in problems and permit higher valve velocities for increased performance. Intended for use with OEM or Edelbrock hydraulic roller lifters sold separately. Note: No further discounts apply.Rollin' Thunder Performer RPM Camshafts Item # Year Application Duration Lift PriceE2201 1977-86 305-350 234˚/238˚ .539"/.548" 264.99 ea E2210 1977-86 305-350** 234˚/238˚ .539"/.548" 321.99 ea E2204 1987-99 305-350* 234˚/238˚ .539"/.548" 254.99 ea E2205 1987-99 305-350** 234˚/238˚ .539"/.548" 309.99 ea *Note: Non-LT1, Non-GEN III. **Wide center EFI.

E2208

En

gin

es &

Co

mp

on

en

ts

454

KK

Toll Free Order Line 800.854.1280Chevy Engine Components

Cast Roller Tip Rocker SetsCast chrome-moly steel rocker arms feature roller tips for reduced friction, and long slots for use with cams that have lift specs higher than stock for additional clearance at the rocker stud. Available for small block Chevrolet engines in your choice of standard sets or self aligning sets in the stock 1.5:1 pivot ratio or a performance enhancing 1.6:1 ratio for increased horsepower and torque. Easy installation requiring no special tools and will fi t under stock valve covers. Fits small blocks through 1986 with 3/8" rocker studs. Set of 16 rockers with pivot balls and nuts. Note: Check for pushrod clearance and alignment, spring coil bind, piston-to-valve clearance and valve timing when modifying the valvetrain to exceed factory specs.Self Aligning Sets66926C 1.5:1 ratio ............................... 129.99 set

Stamped Rocker Arm SetsStamped steel rocker arms featuring long slots for use with cams that have lift specs higher than stock for additional clearance at the rocker stud. Easy installation requiring no special tools and will fi t under stock valve covers. Fits small blocks through 1986 with stock 1.5:1 pivot ratio and 3/8" rocker studs. Set of 16 rockers with pivot balls and nuts, or, add a set of 16 stock-length, high-performance 5/16" push rods with welded ball ends and save. Note: Check for pushrod clearance and alignment, spring coil bind, piston-to-valve clearance and valve timing when modifying the valvetrain to exceed factory specs.1.5:1 ratio for 3/8" Stud 66905 ................................................. 54.99 set 66923C with push rods ......................... 84.99 set

Stamped Roller Rocker SetsStamped steel rocker arms feature roller tips for reduced friction, and long slots for use with cams that have lift specs higher than stock for additional clearance at the rocker stud. Available in the stock 1.5:1 pivot ratio, or, a performance enhancing 1.6:1 ratio for increased horsepower and torque. Easy installation requiring no special tools and will fi t under stock valve covers. Fits small block Chevrolet engines through 1986 with 3/8" rocker studs. Set of 16 rockers with pivot balls and nuts. Note: Check for pushrod clearance and alignment, spring coil bind, piston-to-valve clearance and valve timing when modifying the valvetrain to exceed factory specs.66906C 1.5:1 ratio ................................ 79.99 set 66922C 1.6:1 ratio ................................ 84.99 set

Small Block Push RodsHeat treated 5/16" diameter push rods with welded ball ends for small block Chevrolet applications through 1986. Includes 16 push rods in a clamshell package.66890C stock length ............................. 29.99 set 66889C +.100" ...................................... 26.99 set

Aluminum Stud GirdlesAluminum stud girdles are designed to reduce fl exing of the rocker arm studs and help reduce part breakage under high stress. Increased valvetrain rigidity helps minimize energy loss. For use on small block Chevy engines through 1986 with full-roller rockers. Includes 2 girdles and 16 specially designed poly locks.66950 for 3/8" studs .......................... 114.99 set 66951 for 7/16" studs ........................ 114.99 set

Poly Locks for Roller RockersPoly locks are designed for use specifi cally with full roller rockers featuring a set-screw locking device to ensure they remain secure. Set of 16.66935 for 3/8" studs ........................... 19.99 set 66936 for 7/16" studs ......................... 21.99 set

Chevy Engine Components

1977-95 Engine & Accessory FastenersIt’s easy to assemble a show-quality engine when you use ARP’s handy engine & accessory fastener set. Virtually everything you need comes organized in one convenient package! More importantly, each and every fastener is superior in strength to the OEM bolts. Choose from heat treated 8740 chrome moly steel with black oxide fi nish or corrosion resistant polished stainless steel. Both materials are rated at 170,000 psi tensile strength and come in both hex and 12-point heads. Note: Sets are designed for carbureted engines. 1987 & newer EFI applications may require the purchase of additional fasteners. 1977-86 Chevrolet Small BlockAR5981 black oxide hex head ............. 108.99 set AR5971 black oxide 12-point .............. 108.99 set AR5961 stainless hex head ............. 129.99 set AR5951 stainless 12-point .............. 131.99 set 1987-95 Chevrolet SB w/Headers exc. LS1 & LS6 AR5982 black oxide hex head ............. 129.99 set AR5972 black oxide 12-point .............. 139.99 set AR5962 stainless hex head ............. 194.99 set AR5952 stainless 12-point .............. 209.99 set Chevrolet Small Block LT1/LT4 w/Headers AR5983 black oxide hex head ............. 149.99 set AR5973 black oxide 12-point .............. 164.99 set AR5963 stainless hex head ............. 224.99 set AR5953 stainless 12-point .............. 234.99 set 1996-02 Vortec w/Headers exc. LS1 & LS6AR5984 black oxide hex head ............. 129.99 set AR5974 black oxide 12-point .............. 139.99 set AR5964 stainless hex head ............. 194.99 set AR5954 stainless 12-point .............. 204.99 set Pontiac 350-400-455AR5998 black oxide hex head ............. 124.99 set AR5997 black oxide 12-point .............. 124.99 set AR5996 stainless hex head ............. 159.99 set AR5995 stainless 12-point .............. 159.99 set

Each Set Contains 12 Groups of Fasteners:

• intake manifold bolts• valve cover bolts• thermostat housing bolts• alternator bracket bolts• distributor bracket bolts• motor mount bolts

• oil pan bolts• coil bracket bolts• header bolts• front cover bolts• water pump bolts• fuel pump bolts.

Aluminum Roller RockersThe needle bearing fulcrum and roller tip design unleashes power while lengthening valve train life and reducing valve stem tip wear. Small block sets are available for engines with stock 1.5:1 ratio arms, or performance enhancing 1.6:1 arms. For small blocks through 1986, a combination of (8) 1.5:1 arms and (8) 1.6:1 arms is available to allow greater air fl ow on either the intake or exhaust ports. Sets include 16 rockers with poly locks. Note: * 87 and later. Check pushrod clearance and alignment, spring coil bind, piston-to-valve clearance and valve timing when modifying the valve train.Early Small Block Sets for 3/8" Stud66907C 1.5:1 ....................................... 144.99 set 66908C 1.6:1 ....................................... 144.99 set 66920C 1.5:1/1.6:1 .............................. 174.99 set Early Small Block Sets for 7/16" Stud66909C 1.5:1 ....................................... 144.99 set Late Small Block Sets for 3/8" Stud66914C* 1.5:1 ....................................... 189.99 set 66915C* 1.6:1 ....................................... 189.99 set

Early HD Roller RockersSet of 16 full-roller rockers designed for up to 10,000 RPM. This heavy duty design features an oversized body and fulcrum with a triangulated profi le for additional rigidity and strength. Will accommodate most oversized valve springs. American-made roller bearings are in self contained bearing-cups for extra low friction wear. Available in the stock 1.5:1 pivot ratio, or, 1.6:1 ratio for increased horsepower and torque. Fits small blocks through 1986 with 3/8" or 7/16" rocker studs.Note: Check for pushrod clearance and alignment, spring coil bind, piston-to-valve clearance and valve timing when modifying the valve train to exceed factory specs.Small Block Sets for 3/8" Stud66928C 1.5:1 ....................................... 189.99 set 66929C 1.6:1 ....................................... 189.99 set Small Block Sets for 7/16" Stud66930C 1.5:1 ....................................... 189.99 set 66931C 1.6:1 ....................................... 174.99 set

Replacement LiftersThese lifters will fi t 1977-92 small block Chevrolet engines and are offered in your choice of hydraulic or mechanical depending on your particular application. TVL817 hydraulic ................................. 4.49 ea TVL43 mechanical .............................. 6.99 ea

66906C

66905

AR5981

KK

En

gin

es &

Co

mp

on

en

ts

455

Permatex® Gasket MakerMakes reliable formed in place gaskets that resist cracking, shrinking and migrating. Coats pre-cut gaskets to increase reliability. Resists auto and shop fl uids. Great for use on valve covers, intake manifold end seals, timing covers, water pumps, and thermostat housings. 3 oz. tube.S80022 blue #6B ................................... 3.99 ea S81160 red #26B ................................... 4.99 ea S81878 copper #101B ........................... 5.99 ea

Form-A-Gasket SealantSlow drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. Temperature range of -65ºF to 400ºF. Use where sealing is more important than adhesion. Resists shop fl uids and fuels. Great for valve cover gaskets and oil pan gaskets. Comes in 3 oz. tube in your choice of standard or hi-temp formula.S80016 3 oz. standard ........................ 3.99 ea .

Gaskets & Engine Hardware

Mr Gasket PerformanceHead Gaskets for Chevrolet Engines

Mr. Gasket head gaskets are one of the most advanced, tested and proven in the performance market today and earned the respect of many professional engine builders. A variety of gasket materials are available to meet your specifi c needs.

73144

Mr. Gasket Ultra-SealThe Ultra-Seal head gasket has a fi ve layer composite construction and is coated with high temperature silicone to ensure seal of engine fl uids. It’s graphite core has excellent thermo-conductivity; transfers heat away from hot spots in head to coolant passages, preventing gasket burn-out. The Ultra-Seal head gasket provides excellent stability, compressibility, high temperature endurance and will not Brinell (indent) aluminum cylinder heads..028" Comp. Thickness71134 1977-91 305-350, 4.130" bore ... 39.99 ea .051" LH, Driver Side75713 1997-03 346 LS1, 4.000" bore ... 36.99 ea Mr. Gasket MLS (Multi-Layered Steel)

The MLS head gasket is manufactured from Viton rubber coated stainless steel layers and is stress formed embossments seal extreme cylinder pressure. The MLS head gasket provides excellent stability and reduces cylinder bore distortion. Ideal for supercharged, turbo charged, nitrous and extreme compression ratios..040" Comp. Thickness73130 1977-91 305-350, 4.060" bore ... 94.99 ea 73131 1977-91 305-350, 4.125" bore ... 94.99 ea 73132 1977-91 305-350, 4.165" bore ... 94.99 ea 73133 1977-91 305-350, 4.200" bore ... 94.99 ea 73140 1992-97 350 LT1, 4.040" bore ... 94.99 ea 73141 1992-97 350 LT1, 4.100" bore ... 94.99 ea .054" Comp. Thickness73143 1997-03 346 LS1, 4.125" bore ... 94.99 ea 73144 1997-03 346 LS1, 4.160" bore ... 94.99 ea

Mr. Gasket Steel ShimThe Steel Shim head gasket is manufactured from .020" steel shim stock and is stress formed embossments seal extreme cylinder pressure. Made thinner than OE head gasket, increases engine compression and coated with high temperature silicone to ensure seal of engine fl uids.Note: Do not use with lightweight 305 heads..020" Comp. Thickness71130 1977-91 305-350, 4.100" bore ... 19.99 ea

Mr. Gasket Copper (Dead Soft)The Copper head gasket is manufactured from dead soft solid copper. Provides excellent stability and reduces cylinder bore distortion and can be used with or without stainless steel o-rings. The Copper head gasket is ideal for supercharged, turbo charged, nitrous and extreme compression ratios.Note: Do not use with lightweight 305 heads..020" Comp. Thickness71052 1977-91 305-350, 4.140" bore ... 49.99 ea

Mr. Gasket SolicorThe Solicor head gasket has a solid steel core that provides radial strength for combustion flange. The steel wire ring inside stainless steel fl ange concentrates sealing load around the combustion chamber. The Solicor head gasket provides excellent stability and reduces cylinder bore distortion. Ideal for supercharged, turbo charged, nitrous and extreme compression ratios..042" Comp. Thickness75727 1977-96 305-350, 4.190" bore .. . 49.99 ea .042" Vortec75727 1996-01 350, 4.190" bore .......... 49.99 ea

Gaskets & Engine Hardware

Super Silicone SealantExcellent for use with all types of gaskets. A rapid curing adhesive/sealant can also be used as a sealant between fl anges, hose connectors, and similar close fi tting parts.08661 clear, 3 oz. tube ........................ 9.99 ea 08662 black, 3 oz. tube ....................... 9.99 ea

1977-79 Trans Am Engine Block Locating PinsReproduction locating pins for the cylinder heads and timing cover for 1977-79 Trans Am models with Oldsmobile 403ci V8 engine.TA4011 1977-79 .................................... 9.99 set

1967-70 Pontiac Rocker Arm HardwareOriginal replacement rocker arm hardware for 1967-70 Firebird models.G9158 1969-70 w/Ram Air IV, 16 nuts req 1.99 ea G9239 1967-70 8 bolts req ...................... 2.99 ea

1977-79 Trans Am Engine Block PlugsReproduction engine block plugs for 1977-79 Trans Am models with Oldsmobile 403ci V8 engine. 2 plugs feature the hole to squirt oil on the timing chain.TA4006 1977-79 4 piece set ................ 16.99 set

1977-79 Trans Am Engine Freeze PlugsFreeze plugs for the 403ci Oldsmobile V8 engine fi tted in 1977-79 Trans Am models. This 8-piece set contains all necessary freeze plugs for a complete replacement.TA4007 1977-79 8 piece set ................ 16.99 set

1977-79 Trans Am Engine Block PlugsEngine block plugs for 1977-79 Trans Am models with 403ci Oldsmobile V8 engine. Sold as a 4-piece set.TA4008 1977-79 4 piece set ................ 9.99 set

1968-75 Reproduction Head BoltsOriginal style Pontiac cylinder head bolts for 1968-75 Ram Air II, III, IV, 455 HO and Super Duty models. Each 20 piece set features correct markings and includes original specifi cation bolts, including accessory mount bolts with stud style heads. Available for Round Port and D Port cylinder heads. A8700129 1968-74 Round Port ........ 118.99 set A8700130 1969-75 D Port ............... 99.99 set

A8700129

Freeze PlugsAvoid the chance of rusted leaking freeze plugs with these brass freeze plug sets. Intended for high corrosion marine applications, they are perfect for vehicles that sit for long periods and are a superior material for the every day driver. Available for small block Chevy engines. 64812 small block set .......................... 24.99 set

G9158 G9239

08661

S80022 S81160 S81878

En

gin

es &

Co

mp

on

en

ts

456

KK


Oil Pumps and Components

Oil Pumps

1977-79 Trans Am Oil Filter Housing BoltsOil fi lter housing to engine block for 1977-79 Trans Am with 403ci Oldsmobile V8 engine. These bolts hold the oil fi lter housing to engine block and feature correct TR head markings. Sold as a 3-piece set.TA4028 1977-79 Olds 403 .................. 6.99 set

1977-79 Trans Am Oil Filter Housing GasketOil fi lter housing to engine block gasket for 1977-79 Trans Am with 403ci Oldsmobile engine. This gasket mounts between the oil fi lter housing and engine block.TA4027 1977-79 Olds 403 .................. 4.99 ea

1977-02 Original Oil PumpsReplace your small block Chevrolet oil pump with an original GM replacement. Oil pumps that are not in proper working order can cause major problems including the possibility of seizing your engine.G6042 1977-92 small block ................. 149.99 ea G9408 1993-94 1st des.742 dia tube ... 148.99 ea G6042 1993-94 2nd des .620 dia tube . 149.99 ea G9408 1995-97 LT1 ............................. 148.99 ea G9409 1998-02 LS1............................. 141.99 ea

G6042

10540 10541

1967-02 High Performance Oil PumpsThese Melling Select oil pumps are heavy duty cast pumps that feature steel billet gears for optimum performance. These pumps are available for Pontiac Firebirds from 1967-81 with 301-455 engines, 1993-97 models with LT1 engines and 1998-02 models with LS1 engines. These top quality performance pumps are available with a higher than stock oil fl ow for use on higher horsepower or race motors.Note: *Includes pickup screen. 1967-81 301-45510540* high pressure ........................... 119.99 ea 1967-81 301-35510541* 30% higher pressure than 10540 119.99 ea 1993-97 LT1-35010553 std volume ............................... 99.99 ea 10550 std volume + 25% over std vol. 104.99 ea 10551 25% higher volume, 3/4" inlet 104.99 ea 1998-02 LS1-35010295 10% higher pressure than stock 134.99 ea 10296 18% higher volume than stock 179.99 ea

1977-79 Trans Am Oil Pressure LineEngine block-to-oil pressure sender oil pressure line for 1977-79 Trans Am models with an Oldsmobile 403 engine. Available in your choice of OEM or stainless steel material. TA4037 1977-79 OEM ........................ 8.99 ea TA4038 1977-79 stainless steel ........... 10.99 ea

TA4037

1967-02 Oil Pressure Sending UnitsAn oil pressure sending unit is an electrical or mechanical sensing device that sends information to the pressure gauge or light. Fits 1967-02 Firebird models.For Vehicles Originally Equipped w/Gauges

PS136 1967-81 all .............................. 19.99 ea WE140 1982 2.8-1 w/60 PSI ......... 19.99 ea PS133 1982-84 2.8-1 w/80 PSI ......... 19.99 ea PS133 1982-85 5.0-H w/80 PSI ......... 19.99 ea WE140 1982-87 5.0-H w/60 PSI ......... 19.99 ea PS327 1982-83 5.0-7 w/60 PSI ......... 57.99 ea PS389 1982-83 2.5-F, 2.5L-2............. 54.99 ea PS327 1983 5.0-S w/60 PSI ......... 57.99 ea PS327 1983-84 5.0-H w/60 PSI ......... 57.99 ea PS327 1984 5.0-G w/60 PSI ......... 57.99 ea PS133 1984-85 5.0-G w/80 PSI ......... 19.99 ea WE140 1984-86 5.0-G w/60 PSI ......... 19.99 ea PS133 1985 5.0-F w/80 PSI ......... 19.99 ea PS133 1985-87 2.8-S w/80 PSI ......... 19.99 ea WE140 1985-88 5.0-F w/60 PSI ......... 19.99 ea PS223 1986 2.5-2 ......................... 63.99 ea WE140 1987-88 5.7-8 w/60 PSI ......... 19.99 ea WE140 1988 5.0-E w/60 PSI ......... 19.99 ea PS212 1988 2.3-S ......................... 24.99 ea PS168 1989 2.8, 3.8...................... 24.99 ea PS207 1989-92 5.0, 5.7, 1 prong ....... 24.99 ea PS168 1990-91 3.1, 1 prong .............. 24.99 ea PS220 1993-94 3.4-S, w/o ground ..... 29.99 ea PS220 1993-94 5.7-P ......................... 29.99 ea PS240 1994-95 3.4-S, 2nd des. .......... 31.99 ea PS168 1994-97 5.7-P, 2nd design ...... 24.99 ea PS227 1995-96 3.8-K, 4 prong .......... 21.99 ea PS352 1998 5.7-G ........................ 44.99 ea PS240 1997-02 3.8-K ........................ 31.99 ea PS391 1999-02 5.7-G ........................ 51.99 ea

For Vehicles Originally Equipped w/LightsPS117 1967-76 8 cyl. all .................... 4.99 ea 10045707 1968-76 6 cyl. all .................... 6.99 ea PS118 1977 231-C ........................ 7.99 ea 10045707 1977 350-R, 403-K ........... 6.99 ea PS117 1977 301-Y ....................... 4.99 ea 10045707 1978 305-U, 350-L ............ 6.99 ea 10045707 1978-79 403-K ....................... 6.99 ea PS113 1978-81 231-A........................ 8.99 ea 10045707 1979 305-G, 350-L ............ 6.99 ea PS117 1979 301-Y, 301-W ........... 4.99 ea PS115 1980 301-T, 301-W, 305-H 5.99 ea PS115 1981 4.4-J .......................... 5.99 ea PS115 1981 5.0-H ........................ 5.99 ea PS114 1981 265-S ........................ 8.99 ea PS118 1982-83 2.5-F ......................... 7.99 ea PS117 1982-84 2.8-1, 1 terminal ....... 4.99 ea PS114 1982-84 2.8-1, 2 terminal ....... 8.99 ea PS118 1982-86 2.5-2 ......................... 7.99 ea 10045707 1982-86 5.0-H, 1 terminal ...... 6.99 ea PS114 1985-86 5.0-F, 5.0-G .............. 8.99 ea PS117 1985-87 2.8-S, 1 terminal ....... 4.99 ea PS114 1985-87 2.8-S, 2 terminal ....... 8.99 ea PS154 1987-88 5.0-F, 5.7-8 ............... 11.99 ea PS154 1988 5.0-E ......................... 11.99 ea PS167 1988 2.8-S, 2 terminal ....... 17.99 ea PS207 1989-92 5.0-E, 5.0-F, 5.7-8 .... 24.99 ea PS168 1989 2.8-S, 3.8-7 .............. 24.99 ea PS118 1989 3.8-7 (switch) ........... 7.99 ea PS168 1990-91 3.1-T (fuel pmp swtch) 24.99 ea PS188 1992 3.8-T ......................... 7.99 ea

PS220 PS115

WE140 PS133

1967-72 Oil Pressure LeadOil pressure sending unit wire lead brass elbow. Needed on cars with gauges to connect to the wiring harness.1253514 1967-72 ................................. 5.99 ea

G7300GT440

F31003

1967-97 Oil Filter AdaptersReplacement oil fi lter adapters for 1967-79 Pontiac engines and 1977-97 Chevrolet small block engines.Note: *"Must Have" bypass valve and spring designed to GM specs of 12-16 PSI.Pontiac GT440 1967-69 Pontiac ..................... 54.99 ea F31003* 1970-79 Pontiac ..................... 84.99 ea ChevroletG7300 1977-97 SB w/o oil cooler ..... 49.99 ea G9413 1987-96 SB w/oil cooler ........ 26.99 ea

Oil Pressure Switch SocketEasily remove oil pressure sending units! This socket designed with extra recess to accommodate most oil pressure switches and many brake lamp switches. This 3/8" drive socket features a 1-1/16" hex opening and a durable black oxide coating. X3923 .................................................. 5.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

457

Oil Pans and Components

Milodon Windage Tray ComponentsWindage trays separate oil from the crankshaft as it spins, preventing excess drag and allowing increased horsepower for both street and strip. On a 400 horsepower street engine, a louvered tray can add 12-15 horsepower. Installation kit sold separately.Note: No further discounts apply.

Solid Louvered Windage Tray32240 350-455 Pontiac V8.................. 66.99 ea Windage Tray Install Set81151 350-455 Pontiac V8.................. 59.99 set

Oil Pans

32240

81151

1955-85 Milodon Pontiac Oil Pan GasketsNote: No further discounts apply.Milodon “Crush Proof” Gasket/Seal Sets40900 1955-85 Pontiac V8 ............... 21.99 set

Leaky or Rusted Oil Pan? Go for the Gold!These stock replacement oil pans feature a distinctive gold plating that is not only cosmetic, but also provides long lasting protection against corrosion, inside and out. Every pan is 100% leak checked and block checked to assure the high standard of quality that Milodon is famous for. Flat, unwarped pan rails and proper bolt hole alignment provide for a fi t and function that is unmatched in the industry. All pans are specifi cally designed for use only with Milodon gaskets. Sold separately is Milodon’s “crush proof” gasket seal set, item# 40900 for 326-455ci Pontiac engines. For use with original stock oil pickup screen or Milodon stock type replacement #18670 sold separately.Note: No further discounts apply.

326-455ci Pontiac30770 Milodon oil pan ......................... 154.99 ea 18670 Milodon oil pump pickup tube .. 29.99 ea 40900 Pontiac V8 oil pan gasket.......... 21.99 set

A Low Profi le Pan Suited for Strip or Street!This pan features oil control baffl es designed to provide consistent oil pressure by subduing unwanted, power robbing oil movement. Fits Pontiac 326, 350, 389, 400, 421, 428 and 455. Pan capacity is 7 quarts plus fi lter. Sump is 8” deep. Use with Milodon Hi-volume/Hi-pressure oil pump and correct oil pickup screen as listed below. Sold separately is Milodon’s “crush proof” gasket seal set, item# 40900.Note: No further discounts apply.Pontiac V8 Low Profi le Oil Pan30355 Pontiac V8 oil pan ................ 269.99 ea 40900 Pontiac V8 oil pan gasket ..... 21.99 set Pontiac V8 Windage Tray32240 windage tray ............................ 66.99 ea 81151 windage tray installation kit .... 59.99 set Pontiac V8 Oil Pump Pickup Screen18425 for 18850 pump ....................... 59.99 ea

1982-02 Original GM Oil PansProduction Pontiac V8 engines were redesigned in 1986 with a leak resistant one piece rear seal. This change required a revised oil pan design to fi t a new rear seal retainer which is bolted to the back of the engine block. As a result of these changes, oil pans and gaskets are not interchangeable between 1955-85 and 1986-up engines. If you have installed a crankshaft seal adapter on a block which is machined for a one piece rear seal, you must use an oil pan and gasket designed for 1986 and newer engines. Note: Gaskets not included with oil pans and must be purchased separately.G9079 1982-85 2.5 ............................ 135.99 ea G12915 1987-92 5.0-F, 5.7-8, 305-H .. 193.99 ea G12916 1993-97 5.7L .......................... 134.99 ea G12917 1998-02 5.7L .......................... 324.99 ea

1967-81 Chrome Replacement Oil PansOEM quality look complete with baffl e. Each pan is designed to fi t as original and holds 4 quarts. Add 1 quart when changing fi lter. This oil pan is triple chrome plated. Also includes the drain plug! Fits 301-455. Note: Not for Oldsmobile engine.T9337 1967-81 .................................. 119.99 ea

30770

18425

30355

1977-02 Oil Pump PickupsA screened oil pump pickup protects the oil pump gears against damage from metal fragments which may have found there way into the oil pan. These small block Chevy oil pickups also inhibits the formation of a vortex in the oil sump.G7286 1977-92 small block ............. 21.99 ea G7286 1993-94 2nd design .............. 21.99 ea G9411 1995-97 LT1 ......................... 20.99 ea G9412 1998-02 LS1 ......................... 53.99 ea

G7286

Oil Pan Battery Cable ClipThis clip is installed between an oil pan bolt and the oil pan to provide a guide for the battery cable to the starter.C2555 ................................................ 6.99 ea

Milodon Oil Pan Gaskets & SealsIf you're ordering a Milodon pan, you'll need a Milodon gasket and seal to go with it. Choose from a steel reinforced reusable molded design or a multi-piece crushproof version made of virtually indestructible materials. A variety of applications and confi gurations are available. Note: No further discounts apply.1976-79 One Piece Small Block 41000 1 piece molded gasket .............. 31.99 ea 41010 1 piece molded stroker gasket .. 41.99 ea 1976-85 Crushproof Small Block 40100 5 piece gasket/seal set .............. 19.99 set 41105 4 piece stroker gasket/seal set .. 21.99 set 1986-up One Piece Small Block 41001 1 piece molded gasket .............. 34.99 ea

40100

41000

18670

En

gin

es &

Co

mp

on

en

ts

458

KK

Toll Free Order Line 800.854.1280Oil Pan Hardware

Oil Pan Hardware

Oil Pan Bolt SetsARP’s premium grade pan bolts combine sealing effi ciency with good looks. They are available in black oxide fi nished chrome moly steel or rust-proof stainless steel. Also, take your pick from conventional hex bolt heads and a space-saving 12-point design. Includes washers.Chevrolet Small BlockAR23482 black oxide hex head .............. 29.99 set AR23481 black oxide 12-point ............... 29.99 set AR43482 stainless hex head .............. 39.99 set AR43481 stainless 12-point ............... 39.99 set Pontiac EngineAR20182 black oxide hex head .............. 29.99 set AR20181 black oxide 12-point ............... 29.99 set AR40182 stainless hex head .............. 41.99 set AR40181 stainless 12-point ............... 44.99 set

1977-81 Oil Pan Bolt SetsWhen replacing your oil pan, replace your original greasy, worn out bolts with a set of chrome plated bolts to dress up your engine. 18 bolt set for Chevrolet small block. (14) 1/4"-20 x 1/2" & (4) 5/16"-18 x 1/2"T9271 1977-81 .................................... 9.99 set

1967-81 Oil Pan BoltsReproduction of the oil pan bolts used on 1967-81 Pontiac models. These are exactly like the original bolts to give you the look you desire.F780 1967-81 .................................... 24.99 set

1978-97 Logo Oil Pan Bolt SetsDress up your Firebird with these one-of-a kind dress-up bolt sets. The Pontiac Arrowhead, GT or fl ames logo is stamped directly onto the head of the bolts. They are available in decorative chrome plated or polished stainless steel versions. What better way to make a statement than with these unique bolts?Note: Must specify logo suffi x after part number, A-Arrowhead, B-GT logo, C-Flames.Chrome56465C 1978-87 Chevrolet small block 31.99 set 56497C 1993-97 LT-1 engine ............... 34.99 set Stainless Steel56465S 1978-87 Chevrolet small block 19.99 set 56497S 1993-97 LT-1 engine ............... 29.99 set

C- FlamesB- GT logoA- Arrowhead

Oil Pan Bolt SetsPolished and chromed, or polished stainless steel oil pan bolts will add a custom look to your oil pan while assuring high quality. Includes all necessary fl at and internal tooth lock washers. Chevrolet Small block - (14) 1/4"-20 x 1/2" and (4) 5/16"-18 x 5/8".Chevrolet Small BlockAK124A polished chrome .................... 41.99 set AK124B polished stainless ................... 82.99 set

81320

head detail

AK123A head detail

1977-81 Chevrolet SB Oil Pan Bolt SetReproduction of the original style oil pan bolts used on all early Chevrolet small block engines. Zinc plated with the “L” head markings as original, with external tooth lock washers. (14) 1/4"-20 x 1/2" and (4) 5/16"-18 x 5/8".1256657 1977-81 .................................. 16.99 set

1977-79 Trans Am Oil Pan BoltsReproduction oil pan bolts for 1977-79 Trans Am models with 403ci Oldsmobile engine. This 20-piece set comes complete with all bolts necessary to mount the oil pan.TA4014 1977-79 20 piece set .............. 22.99 set

Milodon Oil Pan Hardware SetForget about cleaning up your old outdated hardware. This complete hardware set contains everything you need for a quick and accurate installation of your oil pan. Designed especially to fi rmly hold oil pans in place, without loosening up. Bolts feature a built-in serrated washer face that eliminates the need for lock washers. Construction is such that they can be used time and time again.Note: No further discounts apply. Oil Pan Hardware Sets for Pontiac Engine85020 plated bolt set ........................... 9.99 set 81320 stud & nut kit ............................ 31.99 set

1970-81 Oil Pressure Regulator Hole PlugOriginal plug designed to fi ll the regulator hole. Plug is designed for all 1970-81 6 cyl. Firebirds.G9084 1970-81 .................................. 4.49 ea

No-Mess Drain PlugReplacement oil pan drain plug designed to help eliminate the messy aspects of draining your oil. Includes a special gasket on the end of the plug to help keep the oil where it belongs while draining.66960 1/2"-20 ..................................... 4.99 ea

1967-02 Oil Pan Drain PlugA magnetic drain plug is cheap insurance for a high performance engine. This plug will catch and hold small pieces of metal before they cause damage. G8756 1967-81 non-magnetic 1/2"- 20 ..... 5.99 ea G7301 1976 magnetic 1/2"- 20 ............. 22.99 ea G9405 1979-95 M12 x 1.75 ....................... 4.99 ea G8756 1988-96 1/2" - 20 ............................ 5.99 ea G3739 1995-02 non-magnetic M12 x 1.75 . 5.99 ea

1967-02 Oil Pan Drain Plug GasketThis is a correct replacement gasket which is used to seal the oil pan drain plug and keep it from leaking. Be sure to replace the gasket whenever replacing the drain plug.G8757 1967-97 ................................. 3.99 ea G9404 1998-02 o-ring ....................... 2.99 ea

1992-02 Oil Level Sensor O-RingOriginal replacement oil level sensor o-ring creates a seal between the sensor and the oil pan.G8428 1992-02 o-ring (all) .............. 4.99 ea

G8757

AR43482

G7301

KK

En

gin

es &

Co

mp

on

en

ts

459Oiling Components

Oiling Components

1968-02 GM Oil Level DipsticksOriginal GM dipsticks will replace bent or missing originals exactly. We offer a larger variety of these dipsticks to choose from including some 3rd generation models!G9068 1968-79 350, 400, 455 w/o AC .. 15.99 ea G3895 1993-94 8 cyl. ............................ 20.99 ea G3896 1995-97 8 cyl. ............................ 20.99 ea G3897 1998-02 8 cyl. ............................ 20.99 ea

G3895

G3896

G3897

G9068

1253542

1253543

1992 Dip Stick Tube NutThe dip stick tube nut for use with 1992 Firebirds.G8429 1992 3.1T (8mm-1.25 x 6.55) .. 1.25 ea G8430 1992 3.1T (8mm-1.25 x 7.5) .... 3.99 ea

G8429

1967-02 Oil Level Upper Dipstick TubesEach dipstick tube will replace your original exactly. We offer dipstick tubes for all generation models.PontiacF191 1967-72 V8 ........................... 30.99 ea G9075 1970-79 upper with AC ........ 36.99 ea F191 1971-72 with 455 HO ........... 30.99 ea F191 1976-79 V8 upper ................. 30.99 ea Small BlockG8426 1988-92 5.0, 5.7 .................... 67.99 ea G3899 1995-97 8 cyl ........................ 19.99 ea G3916 1998-02 8 cyl ........................ 13.99 ea

1967-79 Chrome Oil Pan Dipstick and TubeAftermarket chrome oil dipstick set for use on 1967-79 Pontiac V8 engines without air conditioning, except 389 and 403. Features the highest quality triple chrome plating available.Note: Will not replace 2-piece tube. Compare length and markings against original stick and tube before installing.T9405 1967-79 .................................... 8.99 ea

1972-79 Lower Dipstick Tube with BracketReproduction of the lower dipstick tube for use on 1972-79 models. This dipstick will replace your original exactly.490768 1972-74 exc. 307 .................... 29.99 ea 490768 1975 .................................. 29.99 ea 490768 1976 350, 400, 455 ............ 29.99 ea 490768 1977 350, 400 .................... 29.99 ea 490768 1978-79 400 ............................ 29.99 ea

1967-69 Upper Dipstick Tube with ACReproduction of the upper dipstick tube for 1967-69 Firebird with air conditioning. This is stainless steel constructed with a TIG welded bracket to overcome issues with broken spot welds. The bracket correctly attaches to the front valve cover bolt as original.Note: Very late 1969 models had a tube that did not attach to the valve cover. Use G9075 dipstick tube.F199 1967-69 ......................................... 33.99 ea

1977-79 Flexible Engine Oil Dip SticksThese fl exible engine oil dip sticks are designed to bolt to the block between the headers and the block. They feature an aluminum handle, braided housing and stainless steel dipstick. Available for small block Chevrolet engines.50021 1977-79 small block .................. 24.99 ea

Billet Aluminum Push-In Engine DipstickBillet aluminum handle with a stainless steel dipstick for pre-1980 small block Chevrolet engines. Installs straight into the engine block, no tube necessary. Seals at the bottom of the handle with two O-rings. Billet aluminum handle designed to coordinate with Lokar’s fl exible transmission dipsticks.14711 1979 & earlier rear sump .............. 31.99 ea

Flexible Engine Dip SticksFlexible engine dip stick designed with billet aluminum handle to coordinate with Lokar’s fl exible transmission dip sticks. Slim design allows mounting between header tubes, they can also be used with factory or Sanderson cast manifolds. Easy to read fl exible inner dipstick measuring cable for accurate measure of engine oil.Chevrolet Small Block14705 1979 & earlier rear sump ......... 64.99 ea 14706 1980 & later rear sump ............ 64.99 ea 14708 all Vortec ................................ 64.99 ea 14707 1997-02 LS1 ......................... 64.99 ea

G3899

G3916

F191

1967-73 Pontiac V8 Lower Dipstick TubesReproduction lower dipstick tubes for 1967-73 models with Pontiac V8 engines. 1967-68 dipstick tube features correct original 39 degree angle. 1969-73 dipstick tube features correct original 52 degree angle.Note: Pan must be removed from engine to install tube.1253542 1967-68 39º angle .................. 18.99 ea 1253543 1969-73 52º angle .................. 18.99 ea

En

gin

es &

Co

mp

on

en

ts

460

KK

Toll Free Order Line 800.854.1280Oil Products

FilterMagFilterMag’s powerful rare-earth magnets trap and hold wear inducing metal particles smaller than 40-microns down to 1-micron that the fi lter cannot stop. The super-strong magnetic force holds FilterMag to the cannister. FilterMags are reusable and will reduce maintenance costs by extending the life of your oil. Fits steel oil fi lter cannisters from 2.9" to 5.5" in diameter. The heavy duty/racing FilterMags have a larger curve surface that allows for a stronger magnetic fi eld and a stronger magnetic pull force, designed for more demanding situations. Flat style FilterMags are also available for automatic transmission pans and differential covers.Standard ApplicationsFSS300 2.90"-3.20" 1.90" tall ............. 49.99 ea FSS365 3.50"-3.80" 2.20" tall ............. 54.99 ea FSS375 3.50"-3.80" 2.50" tall ............. 59.99 ea Heavy Duty/Racing ApplicationsFRA300 2.90"-3.20" 2.62" tall ............. 79.99 ea

FSS375

FRA300

Oiling Components

Swivoil Filter WrenchMade of high-quality steel, each wrench has a zinc- plated yoke and blackened band for resistance to rust and corrosion. The plastic dipped handle will not slide off in use. Hard to reach oil fi lters will come off easily with this swivel handle oil fi lter wrench. Swivel tension is adjusted easily using the nut and bolt on the handle.X3082 range 3-1/2" to 3-7/8"............... 9.99 ea

Pour Boy All Purpose Filler SpoutPour Boy all purpose fi ller spout takes the place of funnels. With its unique multiple thread design, Pour Boy fi ts a variety of containers from oil bottles to antifreeze, windshield washer fl uid to gas treatments, all with an airtight seal! Flow of the fl uid is easily controlled by simply bending the spout. No more mess! No more fuss... and... no more funnels! 3 per package.RM1003 ............................................... 7.99 kit

One Pour Boy Fits All These Containers!

1976-92 Engine SaverPrefi lter ScreenAdd life to your engine with a prefi lter screen for your oil fi lter. This stainless steel screen installs on top of conventional spin-on oil fi lters and traps debris down to the 280 micron range without restriction or loss in oil pressure, letting you examine particles from failing bearings that would normally be trapped in a fi lter, unseen. 223845 1976-92 SB Chevrolet ........... 15.99 ea

1976-92 Oil Bypass EliminatorAn oil bypass valve lets oil bypass the fi lter if pressure gets too high or the fi lter becomes plugged. For performance engines that often see increased oil pressure at high RPM, this can cause more damage than it prevents, due to the frequent circulation of unfi ltered oil. This anodized billet aluminum adaptor eliminates the bypass valve, preserving your expensive engine. For small block applications. 223775 1976-92 ................................... 34.99 ea

1976-92 Oil Return Screen SetThis oil return screen set is inexpensive insurance on any modifi ed small block Chevy engine. The screens install in and over the oil drain holes in the lifter valley, trapping debris from valve train failure, keeping it out of the oil pan. Includes galley plugs, screens, and a special epoxy for installation. 225000 1976-92 ................................... 24.99 set

Oil Catch TanksAn oil catch tank works as a fi lter for the PCV system. It connects between an engine's crankcase vent and the induction system, fi ltering oil and moisture before they can enter the intake manifold, reducing emissions and carbon buildup. These fabricated aluminum tanks come complete with mounting tabs, barbed inlet/outlet fi ttings, a drain plug, and a sight glass to let you know when it's full.25031 round 34oz sealed tank ............... 56.99 ea 25051 round 17oz tank w/breather fi lter 56.99 ea 25131 rectangular 68oz sealed tank ...... 111.99 ea

25051

25131

Flex-a-Lite Heavy Duty Engine Oil CoolersThis high performance engine oil cooler features a heavy duty 7" x 21" x 1-1/2" core with 5/8" tubes for higher horsepower applications. Comes complete with all hardware.FL3953 4 cyl.- 6cyl. ............................ 224.99 ea FL3954 V8 .......................................... 239.99 ea

1993-02 Derale Engine Oil CoolersOur high capacity 6-pass cooler features heavy duty tube and fi n, 1/2" seamless copper tubes expanded into 3/4" aluminum extraction, plastic edge guard protectors and an attractive black powder coated fi nish. Cooler size 7-1/2" x 17" x 3/4"15502 all 4, 6 cyl ................... 99.99 ea 15502 1993-02 V8 .......................... 99.99 ea 15503 1955-92 Chevrolet V8 ......... 99.99 ea

15502

15503

FL3954

14961

1989 Turbo Trans Am Oil Drain TubeReproduction oil drain tube for 1989 Trans Am with turbo engine. This tube connects the turbo to the engine block so the turbo has fresh, cool oil to lubricate its bearings. Drain tube block adapter fi tting and gasket are sold separately. 14961 1989 turbo oil drain tube ...... 73.99 ea 14962 1989 gasket .......................... 4.99 ea A8700119 1989 adapter fi tting .............. 18.99 ea

14962A8700119

KK

En

gin

es &

Co

mp

on

en

ts

461Oil Products

Break-In OilBR is used by Joe Gibbs Racing to break-in and dyno all their NASCAR Nextel Cup and Nationwide Series engines. This petroleum based oil provides superior break-in properties for fl at-tappet engines. The special additive package promotes ring seal and provides maximum protection for cams and lifters during initial break-in. BR can also be used to break in roller cam engines, and as a general purpose dyno oil.BR106 15W50 quart ........................ 8.99 ea BR107 15W50 case of 12 quarts ..... 107.99 cs BR114 15W50 2.5 gallon pail ......... 85.99 ea

K&N Oil FiltersThe K&N Performance Gold® Oil Filter has been constructed from the ground up to satisfy the vehicle owner who wants the very best oil fi lter available. The heavy duty construction provides up to 550 PSI hydrostatic burst, and helps reduce the risk of rock or stone damage. But the real quality isn’t just on the outside, the inner fi lter element traps contaminants as small as 10 to 20 microns in size. Metal top end caps are used instead of paper to ensure that no unfi ltered oil can get back into the system. High volume positive oil fl ow with low restriction coupled with exacting engineering standards results in the right balance between engine protection and low oil pump drag. Simply put, the K&N oil fi lter is the very best fi lter money can buy.HP2003 1968 250 ........................... 14.99 ea HP2003 1968 400 ........................... 14.99 ea HP2003 1968-69 350 ........................... 14.99 ea HP2003 1969 250 w/1 bbl. ............. 14.99 ea HP2003 1969-70 400 w/4 bbl. ............. 14.99 ea HP2002 1970-76 250 w/1 bbl. ............. 14.99 ea HP2003 1970-76 350 w/2 bbl. ............. 14.99 ea HP2003 1971-79 400 w/4 bbl. ............. 14.99 ea HP2003 1971-76 455 w/4 bbl. ............. 14.99 ea HP2003 1972-74 400 w/2 bbl. ............. 14.99 ea HP2003 1975-77 350 w/4 bbl. ............. 14.99 ea HP2003 1977 403 w/4 bbl. ............. 14.99 ea HP2002 1977 301 w/2 bbl. ............. 14.99 ea HP1001 1977-80 231 w/2 bbl. ............. 14.99 ea HP2006 1978-79 403 w/4 bbl. ............. 14.99 ea HP2002 1978-79 350 w/4 bbl. ............. 14.99 ea HP2002 1978-79 305 w/2 bbl. ............. 14.99 ea HP1001 1979 301 w/2 bbl. ............. 14.99 ea HP1001 1979-80 301 w/4 bbl. ............. 14.99 ea HP2002 1980 305 w/4 bbl. ............. 14.99 ea HP2002 1981-87 5.0L w/4 bbl. ........... 14.99 ea HP1001 1981 4.9L w/4 bbl. ........... 14.99 ea HP1001 1981 4.3L w/2 bbl. ........... 14.99 ea HP1001 1981 3.8L w/2 bbl. ........... 14.99 ea HP2002 1982-83 5.0L w/TBI .............. 14.99 ea HP1001 1982-84 2.8L w/2 bbl. ........... 14.99 ea HP1001 1982-83 2.5L w/TBI .............. 14.99 ea HP1001 1984-86 2.5L w/FI ................. 14.99 ea HP2002 1985-86 5.0L w/FI ................. 14.99 ea HP1001 1985-86 2.8L w/FI ................. 14.99 ea HP2002 1987-89 5.7L w/TPI............... 14.99 ea HP2002 1987-89 5.0L w/TPI............... 14.99 ea HP1001 1987 2.8L w/MFI ............. 14.99 ea HP2002 1988 5.0L w/FI ................. 14.99 ea HP2001 1988-89 2.8L w/FI ................. 14.99 ea HP2002 1989-90 5.0L w/EFI............... 14.99 ea HP3002 1989 3.8L w/FI ................. 14.99 ea HP2002 1990-97 5.7L w/FI ................. 14.99 ea HP2001 1990-92 3.1L w/FI ................. 14.99 ea HP2002 1991-92 5.0L w/TPI............... 14.99 ea HP2002 1991-92 5.0L w/TBI .............. 14.99 ea HP1001 1993-95 3.4L w/FI ................. 14.99 ea HP1001 1995-02 3.8L w/FI ................. 14.99 ea HP1007 1998-02 5.7L w/FI ................. 14.99 ea

1967-81 OEM Style Oil FiltersGenuine AC Delco oil fi lters for Chevrolet and Pontiac L6 and V8 engines. These replacement fi lters may not be cosmetically correct to the original fi lter depending on the year of the vehicle. Each fi lter fi ts correctly and is larger to allow an additional 1/2 quart of oil.Note: Some fi lters may vary cosmetically from the original application. Each fi lter will fi t as original and function properly.PF24 1967-69 L6 models ..................... 4.99 ea PF24 1967-76 V8 models .................... 4.99 ea PF24 1977-79 (w/o 301, 77 Olds 403) 4.99 ea PF454 1970-76 L6 models (short) ......... 4.99 ea PF454 1978-81 V8 305, 350 (short) ...... 4.99 ea PF44 1977 V8 301 ......................... 4.99 ea PF47 1977-81 V6 ................................. 4.99 ea PF47 1979-81 365, 301 Pontiac V8 ..... 4.99 ea

Oil & Oil Filters

Chrome Oil Filter CoverAdd protection to your fi lter while achieving a high performance look! This chrome plated cover installs quickly and looks great. Just slip the cover over your oil fi lter and tighten the set screw to just snug. Each cover includes triple chrome plating for an extra-bright fi nish. 3-11/16" I.D. x 5-3/16" tall.T1067 .................................................. 9.99 ea

Provides Up To 550Psi Hydrostatic Burst And Traps Contaminants As Small

As 10 To 20 Microns!

Triple Chrome Plating for A Durable Shine!

Hot Rod Vintage Car OilFrom the leader in racing lubricants, now comes a lubricant designed specifi cally for hot rods, street rods, and vintage cars. Joe Gibbs Driven Hot Rod Oil builds on the formulation that is used by thousands of racers while adding critical additives to protect engines. What can you do? Check your oil bottles for the API donut. If the oil you currently use carries an API donut, it probably lacks the amount and type of formulated anti-wear chemistry that historic or racing engines need. Joe Gibbs Driven Hot Rod Oil features high levels of zinc for wear protection as well as US Military grade rust and corrosion inhibitors for storage protection.HR1506 10W30 quart ........................ 10.99 ea HR1507 10W30 case of 12 quarts ..... 131.99 cs HR1606 15W50 quart ........................ 10.99 ea HR1607 15W50 case of 12 quarts ..... 131.99 cs

OE Style White PF24 Oil FilterReproduction of the original style white AC PF24 oil fi lter. This fi lter is a brand new PF24 Delco repainted classic white and screen printed with original blue and red markings to provide a period-correct replacement.Note: *Except 301 ci engines. A8700117 1967-69 L6 ........................ 19.99 ea A8700117 1967-76 V8 ........................ 19.99 ea A8700117 * 1977-79 V8 (77 Olds 403) 19.99 ea

Royal Purple® Engine Break In OilEngine builders have grown increasingly concerned that many modern motor oils do not provide adequate wear protection for new engines, particularly those using fl at-tappet cams. Royal Purple Break-in Oil is formulated to allow optimal ring seal and protect rotating assembly components such as the camshaft and valve train from initial start up wear. Royal Purple combines highly refi ned mineral oil, preferred for engine break-in, with advanced additives containing high levels of zinc and phosphorus to optimize protection in fl at-tappet and roller engines. Fully formulated and does not require the use of any other chemical additives. Royal Purple recommends using their high performance motor oils after the engine is broken in for maximum engine performance.RP11487 quart ...................................... 9.99 ea RP11497 case of 12 .............................. 113.99 cs

Royal Purple® Synthetic OilRoyal Purple Motor Oil delivers superior protection and improves performance in four-cycle gasoline and diesel engines. It increases horsepower and torque, saves fuels and reduces heat, wear and emissions. It has unsurpassed oxidation stability that allows for extended oil drains and fewer oil changes, which saves you time and money and reduces the impact on the environment. Royal Purple’s motor oils for passenger cars and trucks are API licensed. Royal Purple’s performance advantages come from a blend of synthetic oils plus Royal Purple’s proprietary Synerlec technology. Royal Purple Motor Oil is compatible with other mineral and synthetic motor oils.QuartsRP01030 SAE30 quart ........................ 11.99 ea RP01520 5W20 quart ........................ 9.99 ea RP01530 5W30 quart ........................ 9.99 ea RP01130 10W30 quart ........................ 9.99 ea RP01140 10W40 quart ........................ 9.99 ea RP01250 20W50 quart ........................ 9.99 ea GallonsRP04250 10W50 gallon ...................... 37.99 ea CasesRP12030 SAE30 case of 12 quarts ..... 129.99 cs RP12520 5W20 case of 12 quarts ..... 107.99 cs RP12530 5W30 case of 12 quarts ..... 107.99 cs RP12130 10W30 case of 12 quarts ..... 107.99 cs RP12140 10W40 case of 12 quarts ..... 107.99 cs RP12250 20W50 case of 12 quarts ..... 107.99 cs RP44250 20W50 case of 4 gallons ..... 136.99 cs

En

gin

es &

Co

mp

on

en

ts

462

KK


Street Fire HEI DistributorStreet Fire value-line brand components will offer a quality designed alternative to the bottom bargain parts that are springing up all over. We’re so assured with the quality of our new Street Fire HEI Distributor that we provide a one year warranty with it! We know the importance of a centrifugal advance in a distributor so our engineers made sure that the Street Fire received an advance assembly with coated weights and welded weight pins (not just pressed in like other models). Another area that you can not afford to scrimp on is with a distributor gear. The Street Fire is fi t with the same gear that is used on our Pro-Billet models. The metallurgy of this gear has been refi ned for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. The high voltage is transferred through a new rotor to the brass terminals of the distributor cap and out to the plugs. The Street Fire Distributor is the fi rst product to come from our new value branded ignition line. Note: No further discounts apply.

Chevrolet Small Block8362 Street Fire HEI ........................ 149.99 ea 8411 cap ........................................... 31.99 ea 8410 rotor ......................................... 6.99 ea 8402 coil cover ................................. 19.99 ea

Ignition Products

836518381

8362

Ignition Products

1967-02 MSD Pro-Billet DistributorsThese distributors feature a fl awless lightweight CNC-machined 6061-T-6 billet aluminum housing and a polished steel shaft that receives a QPQ, or Tuftride coating. To accurately guide this shaft, MSD uses a sealed ball bearing located at the top of the housing. At the bottom of the housing, an extra long sintered bushing controls the shaft. This combination keeps the shaft spinning smooth and accurately throughout 10,000+ rpm. Other features include an iron drive gear, Rynite® distributor cap with brass terminals and a high output magnetic pickup to trigger the ignition. Choose from the “standard” Pro-Billet distributors that utilize the MSD 6, 7, 8 or 10 series ignition contol box or from our “ready-to-run” distributors that are internally controlled. “Ready-to-Run” distributors do not require an external controller and are the “plug-n-play” alternative to more expensive computer controlled systems. Note: No further discounts apply.

“Standard” Pro-Billet DistributorsFor use with MSD 6, 7, 8 or 10 series ignition.1967-02 Pontiac 326-455 ci8563 ..................................................... 329.99 ea 1977-86 Chevrolet Small Block8361 with vacuum advance .................. 259.99 ea 85551 with mechanical advance ............ 279.99 ea 84891 w/low profi le fl at-top crab cap .... 389.99 ea 85701 small diameter ............................. 309.99 ea “Ready-to Run” Pro-Billet Distributors

Ready-to-run distributors are designed as a plug-n-play distributor. No external ignition control box is needed.1967-02 Pontiac 326-455 ci8528 ..................................................... 399.99 ea 1977-86 Chevrolet Small Block8360 w/optional vacuum advance ........ 339.99 ea 83651 HEI w/hi-energy module & coil.. 429.99 ea 8394 Digital E-Curve w/adj. timing ..... 459.99 ea 1987-93 Chevrolet V6 and V883661 V8 w/dual connector coil ............ 329.99 ea 1993-97 Chevrolet LT-1 Engines8381 1993-94 ....................................... 509.99 ea 83811 1995-97 ....................................... 509.99 ea Replacement Parts For MSD Distributors1967-02 Pontiac 326-455 ci8433 dist. cap for 8563, 8528 ............... 39.99 ea 8467 rotor for 8563, 8528 .................... 9.99 ea 1977-86 Chevrolet Small Block8433 cap for 8360, 8361, 85551 .......... 39.99 ea 84111 cap for HEI dist. 83651 ............... 44.99 ea 8433 cap for 8394 w/male term ........... 39.99 ea 8437 cap for 8394 w/female term ........ 24.99 ea 8431 cap for 85701 small dia. dist. ...... 39.99 ea 8541 cap for Flat-Top crab cap dist. .... 54.99 ea 8467 rotor for 8360, 8361, 8394, 85551 9.99 ea 8467 rotor for 85701 small dia. dist. .... 9.99 ea 84101 rotor for 83651 ............................ 15.99 ea 8531 dist. drive gear ............................... 31.99 ea 1987-93 Chevrolet V6 and V88406 V8, cap & rotor for 83661 ........... 29.99 set 84301 V6, cap & rotor for 83671 ........... 24.99 set 1993-97 Chevrolet LT-1 Engines8481 cap & rotor for 8381 ................... 154.99 ea 84811 cap & rotor for 83811 .................. 151.99 ea

MSD Noise FilterIf you experience radio noise after installing the MSD Ignition, you may need to install an MSD Noise Filter. Electro Magnetic Interference (EMI) is occasionally generated from the MSD power cables and can be easily eliminated by installing the Noise Filter on the heavy power supply wires coming from the MSD. It is recommended that the Noise Filter be used on installations with the MSD 7 and 8 Series Ignitions to prevent this interference. Includes noise fi lter cover.Note: No further discounts apply.8830 MSD noise fi lter w/cover ........ 44.99 ea

MSD Ignition System CoilsThe following Blaster Coils share the same special windings and high voltage output as the other Blaster 2 coils, but do not include a ballast resistor. When you are using an MSD Ignition Control, the ignition is responsible for delivering the voltage to the coil so a ballast is not necessary. The Blaster 3 Coil features an extra tall tower design to improve the coil wire attachment and spark isolation and is supplied with a 90º terminal and boot.Note: No further discounts apply.

8202 Blaster 2 .................................. 49.99 ea 8223 Blaster 3 .................................. 49.99 ea

8202 8223

Blaster SS CoilDon’t let the compact size of the Blaster SS Coil fool you because it is packed with performance. The effi cient E-core windings are designed to produce high amounts of current without sacrifi cing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts. The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90º boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications. Note: No further discounts apply.

8207 Blaster SS Coil ......................... 54.99 ea

Blaster Performance CoilWith a stock points style ignition, a ballast resistor must be placed in-line with the positive terminal of the coil. The following Blaster Coils are supplied with a 0.8 ohm ballast resistor plus a terminal and boot to fi t most applications. Mallory Unilite applications also require the ballast resistor. Available in chrome or redImportant: The ballast is not necessary if an MSD 6 or 7 series ignition control is being used with the points distributor. Note: No further discounts apply.8200 Blaster 2 chrome ..................... 49.99 set 8203 Blaster 2 red ............................ 54.99 set

MSD 6A / 6AL Ignition ControlMSD's new Digital 6A is the base model of the capacitive discharge multiple spark 6 Series design. Features the same footprint as the traditional 6A and 6AL, but with a lower profi le for a sleek look. Like all MSD 6 Series Ignitions, the 6A will work with virtually any vehicle as long as it has a 12-18 volt electrical system. It can be triggered using breaker points, a magnetic pickup or the output of an electronic amplifi er. All necessary parts and wiring instructions are included. Will work on 4, 6 and 8 cylinder engines. The new Digital 6AL shares the same proven circuitry of the Digital 6A with the addition of a built-in adjustable rev limiter with two top mounted rotary dials. The combination of powerful sparks with the safety of a rev control is what makes the Digital 6AL the most popular ignition control in the world. Note: No further discounts apply.

6201 all V8 without rev limiter ........ 209.99 ea 6425 all V8 with rev limiter ............. 259.99 ea

6425

8200

KK

En

gin

es &

Co

mp

on

en

ts

463

Ignition Products

Ignition Products

8.5mm Super Conductor Spark Plug WiresThese wires have extremely low resistance combined with the ability to suppress electro magnetic interference. The Super Conductor uses a copper alloy conductor resulting in less than 50 ohms per foot of wire. This ensures that the most energy possible makes it to the spark plug. This combination is encased in a heavy duty sleeve that will withstand abrasion and high temperatures. Important: *With wires over valve covers. **Without turbo.Note: No further discounts apply.

Red WiresPontiac31369** 1975-92 260, 265, 301, 350 .. 89.99 set 31409 1981-02 267, 305 .................. 99.99 set Chevrolet Small Block31359* 1977-82 ................................ 84.99 set 31409 1978-82 w/HEI ..................... 99.99 set 32149 1993-97 LT1 ......................... 129.99 set 32819 1998-02 LS1 ......................... 71.99 set

Black WiresPontiac31363** 1975-92 260, 265, 301, 350 .. 89.99 set Chevrolet Small Block31353* 1977-82 w/HEI ..................... 84.99 set 32043 1993-97 LT1 ......................... 129.99 set 32813 1998-02 LS1 ......................... 71.99 set

Spark GuardMSD’s Spark Guard is a dielectric grease that solves many common ignition troubles. It stops voltage leaks, eases boot removal, prevents moisture buildup inside the spark plug wire boots, and even helps protect against radio noise (EMI). It also simplifi es the installation of MSD Universal Spark Plug Wire Sets. Spark Guard will not dry up or harden so it will retain its spark isolating capabilities indefi nitely.Note: No further discounts apply.8804 .................................................. 19.99 ea

Pro-Crimp ToolIf you make numbers of plug wires or do a lot of custom wiring, the new Pro-Crimp tool is a must for your toolbox. The Pro-Crimp features interchangeable jaws allowing for a variety of different style crimps with one heavy duty tool. The Pro-Crimp features a hardened steel frame with comfortable molded hand grips. The slick ratchet action provides secure, factory quality crimps every time. The Tool is supplied with precision crimping/ stripping jaws for MSD’s spark plug wire terminals.Note: No further discounts apply.

35051 Pro-Crimp tool II ...................... 81.99 ea

Pro-Crimp DiesThese dies are for use with MSD’s Pro-Crimp crimping Tool #35051. A variety of interchangeable dies are available for a variety of jobs. Note: No further discounts apply.

3506 Amp pin terminal dies .............. 31.99 ea 3507 Amp lug terminal dies .............. 31.99 ea 3508 Plug wire terminal dies ............ 29.99 ea 3509 Weathertight terminal dies ....... 41.99 ea 3510 Deutsch terminal dies ............... 41.99 ea

Pro-Clamp Spark Plug Wire SeparatorsThe MSD Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources. Each Separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires in place. Each base has a hole for a retaining screw if desired and a tab that will help hold it in position. The kit is supplied with two 4-wire separators, two 3- wire separators and four 2-wire separators. Note: No further discounts apply.8843 ................................................. 21.99 set

MSD Tachometer AdapterMSD tach adapters will correct the operation of most voltage triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD ignition unit. If you are triggering an MSD Blaster, 5, 6, SCI, or 7 series ignition with its white wire or points terminal, you will need item # 8910 or 8910E. For applications using green and violet wires for magnetic pickup input, use item # 8920Important: *For use on non-current limiting ignitions, originally equipped with a ballast resistor. **For use on current limiting ignitions, not originally equipped with a ballast resistor. Note: No further discounts apply.

8910* points or amplifi er .................... 51.99 ea 8910E** points or amplifi er .................... 54.99 ea 8920 magnetic pickup ....................... 69.99 ea

31363

3508

2-In-1 Universal Wire SetsThese universal spark plug wires sets are made from MSDs Super Conductor performance wire. Universal wire sets have only the spark plug boot and terminal installed. These boots and terminals are available in your choice of a 90º boot or a multi-angle boot. The distributor end boots and terminals are supplied, but not crimped on. Both sets include terminals for engines with either the early style (socket) and late style (HEI) distributor caps. The wires are extra long so they can be cut to fi t any application. Each set includes a MSD Mini-Stripper crimper for easy installation. Available with wires in either black or red. Note: No further discounts apply.90º Angle31233 black ......................................... 99.99 set 31239 red ............................................. 99.99 set Multi Angle31193 black ......................................... 99.99 set 31199 red ............................................. 99.99 set

Universal Super Conductor wires shown with multi-angle boots

90º boot

installed view

Multi-angle boots

Coil WiresIf you’re changing a coil or cap to a new design, you could fi nd yourself searching for different terminals for the coil wire. MSD offers these two style coil wires to make the change easy. Also, remember that the coil wire sees eight times the use of each plug wire so changing the coil wire as a maintenance through the race season is recommended. Important: *18” long, straight female socket coil terminal and boot on one side with a straight female socket distributor cap socket terminal and boot on the other. **18” long, 90º male coil terminals and boots are installed on both sides to connect to an HEI style terminal. A terminal adapter is also supplied to adapt to a female socket style distributor cap. Note: No further discounts apply.

84049* 8.5mm Super Conductor .......... 15.99 ea 84039** 8.5mm Super Conductor, red ... 14.99 ea 84033** 8.5mm Super Conductor, black 15.99 ea

84039

8920

MSD 6 Series Vibration MountsIn performance applications such as off-road, racing, and marine applications, strong vibrations can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend this vibration mount set. 8823 .................................................. 14.99 set

En

gin

es &

Co

mp

on

en

ts

464

KK


Mallory Ignition Products

Mallory Performance Ignition

Unilite Electronic IgnitionUnilite Electronic Ignition distributors use Mallory’s Unilite module and can trigger either a HyFire capacitive discharge ignition or be run with just a coil. Each distributor features an easy 3-wire hookup. Choose from our mechanical advance or vacuum advance models. Also available for those running a mechanical tach is a Unilite mechanical advance model with mechanical tach drive output.Note: No further discounts apply.

Mechanical Advance DistributorsPontiac V83758001 301-455 ................................. 319.99 ea Chevrolet Small Block V83748201 all .......................................... 284.99 eaMechanical Advance With Tach Drive

Chevrolet Small Block V83848201 all .......................................... 469.99 ea

Vacuum Advance DistributorsPontiac V84758001 301-455 ................................. 329.99 ea

Magnetic Breakerless IgnitionMagnetic Breakerless Ignition distributor uses Mallory’s MBI (Magnetic Breakerless Ignition) triggering system and can trigger either a HyFire capacitive discharge ignition or be run with just a coil. Each distributor features an easy 3-wire hookup. Choose from our mechanical advance or vacuum advance models. Note: No further discounts apply. Pontiac V85758001 w/vacuum advance ............... 429.99 eaChevrolet Small Block V85048201 w/mechanical advance .......... 359.99 ea5748201 w/vacuum advance ............... 374.99 ea

Dual Point IgnitionEconomical Dual Point Ignition distributors have heavy duty dual points for increased RPM range and coil output. Choose from our mechanical advance or vacuum advance models. Also available for those running a mechanical tach is a mechanical advance model with mechanical tach drive output.Note: No further discounts apply.

Pontiac V82558001 w/mechanical advance .......... 349.99 ea2658001 w/mech. adv. & tach drive .... 494.99 ea 2758001 w/vacuum advance ............... 409.99 ea Chevrolet Small Block V82548201 w/mechanical advance .......... 219.99 ea 2748201 w/vacuum advance ............... 234.99 ea

Mallory Breakerless Distributor PartsTune-up parts for Mallory breakerless distributors.Note: No further discounts apply.

Module605 all series (except 50 & 57) ...... 89.99 ea Distributor Cap209M all 8 cyl. series ......................... 21.99 ea 270 all 6 cyl. series ......................... 24.99 ea Distributor Rotor335 37 & 38 series ......................... 12.99 ea 322 47 series 8 cyl. ......................... 14.99 ea 309 50 series ................................... 6.99 ea 310 57 series ................................... 6.99 ea Harness29349 all series ................................... 14.99 ea

Mallory Breaker Point Distributor PartsTune-up parts for Mallory breaker point distributors.Note: No further discounts apply.

Performance Points25042X all series ................................... 19.99 ea Condensor400 all series (except 27) ................ 7.99 ea 401 27 series ................................... 8.99 ea Distributor Cap209M all 8 cyl. series .......................... 21.99 ea 270 all 6 cyl. series .......................... 24.99 ea Distributor Rotor309 all series (except 27) ................ 6.99 ea 310 27 series .................................... 6.99 ea Distributor Cap & Rotor2091M all 8 cyl. series .......................... 24.99 setVacuum Advance29332 27 series .................................... 34.99 ea

29332

400

309

26580013748201

5048201 5748201

25042X

209M

2091M

605

310

1987-93 Fuel Injection HEI/FI Dist.HEI/FI 80 series distributors are designed to work with factory fuel injection systems used on popular GM V8 engines. High output magnetic trigger for stronger signal throughout the RPM range. Precision CNC-machined billet aluminum housing. Exclusive Mallory distributor cap with added crossfi re protection. Unique ball bearing/bushing-supported oversized hardened shaft for maximum timing stability. Direct plug-in replacement for factory distributor. The output of the distributor works the factory computer system making it the ideal plug-and-play upgrade on these engines.Note: No further discounts apply.

8048204 1987-93 V8 w/FI exc. LT-1 .. 319.99 ea

29349

209M

2748201

4748201

KK

En

gin

es &

Co

mp

on

en

ts

465

8mm Universal Fit Spark Plug Wire SetsMallory top-of-the-line spiral core Pro Sidewinder spark plug wire sets feature a low resistance spiral core that delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease and fuel. Withstands temperatures up to 500 degrees. Universal applications. Important: Wires are not terminated at cap end. Note: No further discounts apply.

Chevrolet Small Block947 45º spark plug boots ................. 74.99 set

607

202M 303M

M612

1967-93 GM Distributor Tune-Up PartsIf your vehicle is equipped with a V8 engine and a GM factory distributor, upgrade to Mallory components during your next tune-up. You’ll enjoy increased performance, longer life and maximum dependability. Note: No further discounts apply.

Distributor Cap202M 1967-74 V8 breaker point. . 25.99 ea 261 1974-90 V8 HEI. ................ 34.99 ea 265M 1987-93 V8 w/FI exc. LT-1 29.99 ea Rotor Cap303M 1967-74 V8 ......................... 13.99 ea 362 1974-90 V8 HEI. ................ 14.99 ea 366 1987-93 V8 w/FI exc. LT-1 9.99 ea Distributor Cap & Rotor Set525 1974-90 V8 HEI. ................ 59.99 set 520 1987-93 V8 w/FI exc. LT-1 49.99 set Distributor Condensor401 1967-74 V8. ........................ 8.99 ea Ignition Control Module607 1974-87 V8 HEI., 4 prong .. 31.99 ea M612 1987-93 V8 w/FI exc. LT-1 71.99 ea Pick Up29789 1987-93 FI Distributor. ....... 54.99 ea

401

1967-74 Mallory E-Spark Conversion SetThis self-contained conversion kit fi ts neatly within a stock GM or Mallory distributor cap, so it looks like original from the outside. Thanks to specialized electronic circuitry and an infrared signal, you’ll never again have moving parts to wear out, and you gain better performance, drivablity, and throttle response, plus improved fuel effi ciency! Note: No further discounts apply.Delco Distributor61001M 1967-74 all w/window cap .... 65.99 set

774

947

High Temperature Wire Divider KitsEach kit contains two 4-hole brackets, two 3-hole brackets, and two 2-hole brackets. Note: No further discounts apply.29101 red ............................................. 34.99 set 29102 black ......................................... 34.99 set

29101

Unilite Conversion For GM DistributorsUnilite conversion kits for point distributors put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features include more accurate ignition timing than any other type of system, improves performance and fuel effi ciency, easy to install with simple hand tools, reduced maintenance (never change points again) and latest thermal-clad-based surface mount construction for maximum dependability and long life.Note: No further discounts apply.501 1967-74 8 cyl..................... 129.99 set

1967-93 Mallory Performance CoilsReplace your stock coil with a Mallory high performance coil for increased performance, longer life and maximum dependability. A variety of applications are available for your Classic Chevrolet engine.Note: No further discounts apply.Ignition Coil for Breaker Point Ignition29217 1967-74 V8 chrome. ........... 49.99 ea In-Cap Ignition Coil for HEI Ignition29212 1974-90 V8 HEI. ................ 71.99 ea External Ignition Coil for HEI Ignition29210 1987-93 V8 w/FI exc. LT-1 59.99 ea

29217

29212

29210

Mallory Performance Ignition

Mallory Ignition Products

8MM Silicone Jacketed Spark Plug WiresPro Wire and Sprint Wire 8MM silicone jacketed wire sets feature high tech CIF (Carbon Impregnated Fiber) core for great energy delivery at an affordable price. CIF core provides RFI suppression for even the most sensitive on-board electronics, such as electronic ignition, sound system or computer controls. 8MM ozone-resistant silicone jacket repels water, oil, grease and fuel. Withstands temperature up to 500 degrees. Universal applications. Important: Wires are not terminated at cap end.Note: No further discounts apply.

Pro Wire Black775 90º spark plug boots ................. 49.99 set774 straight spark plug boots .......... 54.99 set703 45º spark plug boots ................. 59.99 setSprint Wire Yellow766 90º spark plug boots ................. 44.99 set

En

gin

es &

Co

mp

on

en

ts

466

KK

Toll Free Order Line 800.854.1280Performance Ignition

1967-95 GM Distributor Tune-Up PartsIf your vehicle is equipped with a V8 engine and a GM factory distributor, upgrade to Accel components during your next tune-up. Note: No further discounts apply.

Distributor Cap120137 1987-93 V8 w/FI exc. LT-1 .. 34.99 ea

Rotor Cap130120 1974-86 V8 HEI. ................. 14.99 ea 130137 1987-93 V8 w/FI exc. LT-1 .. 19.99 ea

Distributor Cap & Rotor Set8120 1967-74 V8 breaker point .... 29.99 set 8122 1974-86 V8 HEI. ................. 29.99 set 8131 1985-87 V8 5.7 w/in cap coil 29.99 set 8132 1987-93 V8 w/FI exc. LT-1 .. 29.99 set

Distributor Condensor100108 1967-74 V8 .......................... 14.99 ea

Points110127 1967-74 std. performance .... 24.99 ea 110128 1967-74 high performance. .. 24.99 ea

Ignition Control Module35361 1974-87 HEI., 4 prong ......... 44.99 ea 35363 1981-90 HEI., 7 prong ......... 55.99 ea 35362 1986-90 GM dist# 1103749 . 54.99 ea 35370E 1990-95 GM dist# 1103880 . 75.99 ea

1967-01 Accel High Performance CoilsReplace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability. A variety of applications are available for breaker point and breakerless ignition.Note: No further discounts apply.

Ignition Coil42,000 Volt Coil - Breaker Point Ignition8140C 1967-74 chrome. .................... 44.99 ea 8140 1967-74 yellow ...................... 44.99 ea 45,000 Volt Coil - Breaker Point or Breakerless Ignition140001 1967-74 super coil ................. 84.99 ea 45,000 Volt Coil for Breakerless Ignition8145C 1967-74 chrome. .................... 49.99 ea 8145 1967-74 yellow ...................... 44.99 ea 8140HV 1967-74 high vibration .......... 55.99 ea 45,000 Volt HEI In-Cap Super Coil with Cover140003 1974-87 w/red & yellow wires 74.99 ea 140005 1974-87 w/red & white wires 74.99 ea 48,000 Volt HEI In-Cap Super Coil140013 1974-87 w/red & yellow wires 79.99 ea 140015 1974-87 w/red & white wires 94.99 ea Cover for 48,000 Volt HEI In-Cap Super Coil48,000 Volt HEI Remote Mount Super Coil140011 1984-95 ................................. 51.99 ea 140024 1996-01 ................................. 54.99 ea 45,000 Volt AC/Delco Style DIS Super Coil140017 1986-01 ................................. 49.99 ea

8132 110128

100108

3536235363

35361

HEI In-Cap Coil Low Ohms Contact BrushThe standard OE carbon brush in GM’s HEI in-cap coil distributor has a very high (5k to 10k Ohms) resistance. When an aftermarket capacitive discharge ignition system, such as an ACCEL, Mallory, Crane, Holley or MSD unit is installed, this high resistance can create enough heat to melt the distributor cap. ACCEL’s low Ohm contact brush solves this problem because it passes virtually all the energy to the rotor without causing excessive heat build up. Note: No further discounts apply.

120900 .................................................. 14.99 ea

Performance Ignition

8140 8140C 8145 8145C

8140HV

140005

140011

140017

140024

140015

140001

Mallory Tachometer AdapterSome applications with a tachometer need a voltage spike signal from the negative side of the coil before they will operate properly. This signal changes when a high inductive storage or capacitive discharge electronic ignition control is installed. The tachometer adapter develops a voltage spike that will run most voltage triggered tachometers and current (series) triggered tachometers. The tachometer adapter works with any inductive storage or capacitive discharge electronic ignition control triggered by points or electronic amplifi er trigger. For vehicles w/inductive or capacitive discharge for factory style tach.Note: No further discounts apply.

29078 .............................................. 154.99 ea

ACCEL Tachometer AdapterIf your tachometer fails to operate after installing either of the ACCEL 275+ or 300+ CD ignition controls, you may need a tach adapter. The green lead in the wire harness from the ACCEL 275+ or 300+ ignition control produces a 12 volt square wave signal. This can be used with most tachometers. If the tachometer still does not function properly you will need a tach adapter. If your tachometer was triggered from the coil negative terminal (voltage trigger) and you are using the white lead via either points, electronic ignition amplifi er output or OE module to trigger the ACCEL 275+ or 300+ CD ignition control, then you need this ACCEL tach adapter.Important: If you are using the output signal directly from the magnetic pickup inside the distributor to trigger the ACCEL 275+ or 300+ CD ignition control, and your tachometer is not functioning properly,then you will need a different tach adapter, such as Mallory p/n 29078.Note: No further discounts apply.29074 ................................................. 44.99 ea

Mallory 611M Power CellImprove performance, increase spark plug life, and enjoy better fuel economy with this universal power cell. This Mallory Ignition Power Cell maintains a constant coil output voltage up to 6500 RPM on stock electronic ignition systems. It delivers smoother engine operation while improving the effi ciency of combustion with a more consistent spark. C.A.R.B. approved and 50 state legal.Note: No further discounts apply.

611M Mallory Power Cell .................. 39.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

467Performance Ignition

SuperStock 300+ 8.8mm 8.8mm Extreme Year Engine, Model & Notes SuperStock Spiral Race Spiral C/G 9000 1967-74 8 cyl. w/point ignition 4040,B,K,R 5040B,K,R,Y 7032 8033 8022 A8700197 1967-74 6 cyl. w/point ignition 4021 5040B,K,R,Y 7032 8036 8026 A8700197 1974-81 8 cyl. Pontiac eng. w/HEI, except turbo 4040,B,K,R 5040B,K,R,Y 7033 8033 8023 A8700197 1975-76 6 cyl. w/HEI 4021 5040B,K,R,Y 7033 8036 8026 A8700197 1977-79 8 cyl. Oldsmobile eng. 4040,B,K,R 5040B,K,R,Y 7033 8033 8023 A8700197 1977-86 8 cyl. Chevrolet eng. (8) 90 boots 4041,B,K,R 5041B,K,R,Y • 8031 8021 A8700198 1977-87 6 cyl. 3.8, 4.1 4021 5040B,K,R,Y 7033 8036 8026 A8700197 1978-81 8 cyl. Buick eng. 4040,B,K,R 5040B,K,R,Y 7033 8033 8023 A8700197 1980-81 8 cyl. 4.9 301 Turbo engine • • 7033 8033 • • 1982-92 6 cyl. 2.8, 3.1 4021 5040B,K,R,Y 7033 8036 8026 A8700197 1987-92 8 cyl. Chevrolet eng. (8) 90 boots • • • 8031 8021 •


300+ RACE WIREApplications: Race engine confi gurationsFeatures: Silicone spark plug boots, black wire, stainless steel spark plug terminalsBenefi ts: Maximum energy to spark plug, heaviest gauge conductor in the industry, 8.8mm oversized racing wire, complete suppression of EMI/RFI (radio noise)Construction: 8.8 mm, 600° F double silicone construction with a fi berglass braidCore: HD gauge spiral wound copper/nickel alloy conductor, magnetic suppression & fully reactive ferrite material, all Kevlar core, 150 Ohms/foot resistanceNote: No further discounts apply.7032 8.8mm spiral core - black ....................................................... 99.99 set

8MM SUPER STOCK SPIRALApplications: Late model car & truck coverageFeatures: Color-matched silicone spark plug boots, high gloss blue, black, red & yellow wire, stainless steel spark plug terminalsBenefi ts: True performance upgrade, increased ignition energy due to lower resistance, oversized upgrade where OE is 7mmConstruction: 8mm, 550° F double silicone construction with a fi berglass braidCore: Spiral wound stainless steel alloy conductor, magnetic suppression & semi-reactive material, fi berglass/Kevlar core, 500 Ohms/foot resistanceNote: No further discounts apply.5040 8mm yellow, blue, black, red (specify color) .................... 59.99 set 5041 8mm yellow, blue, black, red (specify color) .................... 59.99 set

SUPER STOCKApplications: Performance upgrade to OE-type/ replacement-typeFeatures: Silicone spark plug boots, yellow, blue, red, & black silicone wire, zinc-plated steel spark plug terminalsBenefi ts: Effi cient transmitter of ignition energy, popular priced performance, oversized upgrade where OE is 7mmConstruction: 8mm, 450° F silicone & EPDM rubber construction with a fi berglass braidCore: Carbon/graphite conductive material, high resistancesuppression, fi berglass/Kevlar, 3000-7000 Ohms/foot resistance Note: No further discounts apply.4021 8mm yellow (6 cyl. only) .............................................. 41.99 set 4040 8mm yellow, blue, black, red (specify color) (8 cyl) .... 39.99 set 4041 8mm yellow, blue, black, red (specify color) (8 cyl) .... 39.99 set

Fiberglass Braid

Conductive High Resistance Carbon Graphite Suppression Material

8.0MM High Gloss Yellow, Blue, Black or Red 450°F Silicone Jacket

High Density, High Durometer EPDM Insulation

Fiberglass/Kevlar Stranded Inner Core

Fiberglass Braid

Conductive Coating

8.0MM High Gloss Yellow, Blue, Black or Red 550°F Silicone Jacket

High Density,High Temperature,High Durometer Silicone Insulation


Heavy Gauge Stainless Steel Alloy Conductor

Carbon GraphiteSemi-Reactive Element

Fiberglass Braid

Conductive Coating

8.0MM High Gloss Black 600°F Silicone Jacket

High Density, High Temperature,High Durometer Silicone Insulation

All Kevlar Stranded Inner Core


FerriteEMI/RFISuppression Element

8.8MM WIREApplications: Performance street/stripFeatures: 8.8mm oversized wire, oversized 8.8mm silicone spark plug boots, high gloss yellow wire, stainless steel spark plug terminalsBenefi ts: True performance upgrade, increased ignition energy due to lower resistanceConstruction: 8.8mm, 550° F double silicone construction with a fi berglass braidCore: Spiral wound stainless steel alloy conductor, magnetic suppression, semi-reactive material, fi berglass/Kevlar core, 500 Ohms per foot resistance, also available with carbon/graphite coreNote: No further discounts apply.8031 8.8mm spiral core - yellow ...................................................... 89.99 set 8033 8.8mm spiral core - yellow ...................................................... 89.99 set 8036 8.8mm spiral core - yellow ...................................................... 79.99 set 8021 8.8mm carbon/graphite core - yellow .................................... 84.99 set 8022 8.8mm carbon/graphite core - yellow .................................... 84.99 set 8023 8.8mm carbon/graphite core - yellow .................................... 84.99 set 8026 8.8mm carbon/graphite core - yellow .................................... 79.99 set

Fiberglass Braid

8.8MM High Gloss Yellow 550°F Silicone Jacket



Conductive High Resistance Carbon Graphite Suppression

Fiberglass Braid

Conductive Coating

8.8MM High Gloss Yellow 550°F Silicone Jacket




Carbon GraphiteSemi-Reactive Element

EXTREME 9000 Ceramic WiresIncrease ignition energy with these incredibly low resistance severe-duty spark plug wires! These 8mm wires are designed for forced induction, HD truck, and racing applications. These wires can withstand up to 600° F while offering a mere 500 ohm/ft of resistance and complete EMI/RFI suppression. The ceramic plug boots and stainless steel terminals withstand temperatures up to 2000° F. Compatible with both pre and post HEI systems.Important: Universal 8 cylinder sets can be used for 6 cylinder applications.Note: No further discounts apply. A8700197 8mm black with straight white ceramic boots .................. 101.99 set A8700198 8mm black with 90° white ceramic boots ........................ 101.99 set A8700199 8mm black with 45° white ceramic boots ........................ 101.99 set

Fiberglass Braid

Conductive Coating

8.8MM High Gloss Black 600°F Silicone Jacket

High Density, High TemperatureHigh Durometer Silicone Insulation

All Kevlar Stranded Inner Core

Heavy Gauge Copper-Nickel Alloy Conductor

FerriteEMI/RFISuppression Element

En

gin

es &

Co

mp

on

en

ts

468

KK


Underhood Wiring Conduit

Complete Conduit Starter SetIs your hood hiding a mess of wiring and vacuum lines? De-clutter your engine bay with this conduit set! This set includes 15 feet of 1/2" polished stainless steel fl exible conduit, enough for most applications, as well as six chrome 1/2" conduit terminators, two 1.50" x 2" chromed aluminum enclosures, chrome aluminum fi rewall pass through, and twelve 1/2" nickel-plated mounting clips. 42565 ............................................... 129.99 ea

Conduit Mounting Clips And BracketsThese bright nickel plated clips secure your stainless conduit to keep your installation looking clean and professional. Use with the chrome plated universal mounting brackets to allow spacing from fender wells, fi re walls or can even be used on the engine. 42552 3/8" mounting clips (12 pk) ....... 5.99 set 42553 1/2" mounting clips (12 pk) ....... 5.99 set 42555 universal mounting bracket ........ 5.99 ea

Universal Aluminum EnclosuresClean up junction blocks and terminals with these chrome-plated aluminum enclosures! These universal enclosures feature a ball milled style cover and can be used as junction or termination blocks for wiring when incorporated with the fl exible stainless steel conduit termination fi ttings.Note: Enclosures do not include holes for mounting or conduit terminator installation. 42556 small 1.50" x 2" ...................... 13.99 ea 42557 large 2.062" x 2.562" ............. 16.99 ea

42557

42580

42559 42558

42552

Firewall Pass Through EnclosureCompliment your stainless steel conduit with this fi rewall pass-through! This chrome-plated aluminum enclosure makes it easy to pass wires through to the engine compartment. Machined with two holes for terminators and fi tted with a rubber grommet for fi rm seal. Includes stainless mounting hardware and cover gasket.Note: Enclosure does not include conduit or terminators. 42564 ............................................... 24.99 ea

Flexible Stainless Steel ConduitCustomize your engine bay with this polished stainless steel conduit! Flexible enough to be routed in virtually any shape or direction, this conduit protects wiring and vacuum lines while providing a clean, clutter-free appearance under the hood. 42571 1/4" conduit 5 foot roll ............... 12.99 ea 42561 3/8" conduit 10 foot roll ............. 29.99 ea 42560 1/2" conduit 10 foot roll ............. 34.99 ea

Conduit Termination AccessoriesOrganize your stainless steel conduit with these chrome plated terminators! These connectors and terminators accent your engine bay while protecting wires and hoses from engine heat, dirt, and debris. Available in three diameters with a common thread size for each to fi t the end caps and tees. 42580 1/4" terminator ........................... 4.99 ea 42551 3/8" terminator ........................... 4.99 ea 42550 1/2" terminator ........................... 4.99 ea 42559 terminator end cap ...................... 3.99 ea 42558 t-fi tting ...................................... 7.99 ea

De-Clutter Your Engine Bay!Take the ugly out of your electrical wiring with HAL STUFF wiring conduit. All of the major components are triple chrome plated or are polished 304 stainless steel. Choose from a complete starter set with accessories, or piece together your own custom application!

Billet Choke CoversThese chrome-plated choke covers enhance the appearance of dressed engines by covering the plastic choke on Edelbrock, Demon, and Holley carburetors. Each billet aluminum cover comes with a snap-in louvered insert. Available as an individual cover or as a kit with polished stainless steel conduit. 42567 choke cover ............................. 23.99 ea 42563 choke cover kit ........................ 44.99 ea

42563

HAL Stuff Underhood Wiring Conduit

KK

En

gin

es &

Co

mp

on

en

ts

469

Thunder Volt 8.2 Ignition WiresTaylor Thunder Volt 8.2mm ignition wires are dyno tested and proven to increase horsepower and torque. Designed with a Ferrite spiral-wound core coated with a blend of copper/nickle bonded with a conductive acrylic cover for only 40 ohms per foot of resistance with optimum RFI and EMI suppression. A 2-layer 100% Zimplex silicone outer jacket for heat protection up to 600 degrees. Available in black, red, or blue with grey silicone spark plug boots. Universal wire sets include both standard socket and HEI boots with the appropriate terminals. Made in USA.

Universal Fit 8 Cylinder Sets A970101K black 90° boots .................. 74.99 set A970101R red 90° boots .................. 74.99 set A970101B blue 90° boots .................. 74.99 set A970102K black 135° boots ................ 74.99 set A970102R red 135° boots ................ 74.99 set A970102B blue 135° boots ................ 74.99 set A970103K black 180° boots ................ 74.99 set A970103R red 180° boots ................ 74.99 set A970103B blue 180° boots ................ 74.99 set Custom Race Fit Over Valve Cover SetsSmall Block Chevy A970105K black HEI & 90° boots ...... 69.99 set A970105R red HEI & 90° boots ...... 69.99 set A970105B blue HEI & 90° boots ...... 69.99 set

Custom Race Fit Under Header WireSmall Block Chevy A970107K black HEI & 90° boots ...... 69.99 set A970107R red HEI & 90° boots ...... 69.99 set A970107B blue HEI & 90° boots ...... 69.99 set

Thunder Volt 50 Ignition WiresTaylor Thunder Volt 10.4mm ignition wires are dyno tested and proven with increases up to 5 horsepower and 7 pounds of torque. Designed with a Ferrite spiral-wound core coated with a blend of copper/nickel bonded with a conductive acrylic cover to provide low resistance at only 40 ohms per foot with optimum RFI and EMI suppression. Features a tightly woven heat treated fi berglass braid and a 3-layer 100% Zimplex silicone outer jacket for heat protection up to 600 degrees with a 102,000 volt dielectric strength. Available in black with gold lettering and low profi le color coordinated silicone boots. Universal wire sets include both standard socket and HEI boots with the appropriate terminals. Made in USA.

Universal Fit 8 Cylinder Sets A9720010 90° boots .............................. 139.99 set A9720011 135° boots ............................ 139.99 set A9720012 180° boots ............................ 139.99 set Custom Race Fit Over Valve Cover SetsSmall Block Chevy A9720014 HEI & 90° boots .................. 129.99 set Pontiac V8 A9720017 socket & 135° boots ............ 129.99 set A9720018 HEI & 135° boots ................ 129.99 set

Custom Race Fit Under Header WireSmall Block Chevy A9720016 HEI & 90° boots .................. 129.99 set

Custom Fit Model Specifi c Sets A9720021 1993-97 5.7L LT1 ............. 129.99 set A9720022 1999-02 5.7L LS1 ............. 79.99 set

Taylor 409 Pro Race Ignition WiresTaylor 409 Pro Race 10.4mm high performance ignition wires are designed for street and track performance. Featuring tightly woven heat treated fiberglass braid over a 100% silicone Spiro-Pro ignition wire providing a 3-layer jacket these wires have a 102,000 volt dielectric strength and thermal protection to 600 degrees. The spiral wound core with 350 ohm resistance per foot has excellent EMI and RFI suppression making them perfect for extreme electronic ignition systems. Available in black, red, and blue with low profi le silicone Pro Boot spark plug boots. Universal wire sets include both standard socket and HEI boots with the appropriate terminals. Made in USA.

Universal Fit 8 Cylinder Sets A970112K black 90° boots ................. 114.99 set A970112R red 90° boots ................. 114.99 set A970112B blue 90° boots ................. 114.99 set A970113K black 135° boots ............... 114.99 set A970113R red 135° boots ............... 114.99 set A970113B blue 135° boots ............... 114.99 set A970114K black 180° boots ............... 114.99 set A970114R red 180° boots ............... 114.99 set A970114B blue 180° boots ............... 114.99 set Custom Race Fit Over Valve CoverSetsSmall Block Chevy A970116R red HEI & 90° boots ..... 114.99 set A970116B blue HEI & 90° boots ..... 114.99 set Pontiac V8 A970119R red socket & 135° boots 114.99 set A970119B blue socket & 135° boots 114.99 set A970120R red HEI & 135° boots ... 114.99 set A970120B blue HEI & 135° boots ... 114.99 set

Custom Race Fit Under Header WireSmall Block Chevy A970118R red HEI & 90° boots ..... 114.99 set A970118B blue HEI & 90° boots ..... 114.99 set

Custom Fit Model Specifi c Sets1993-97 Wire Sets A970123R red 5.7L LT1 ................... 114.99 set A970123B blue 5.7L LT1 ................... 114.99 set 1999-02 Wire Sets A970124R red 5.7L LS1 ................... 69.99 set A970124B blue 5.7L LS1 ................... 69.99 set

1974-90 Taylor SST Shielded Ignition WiresTaylor SST Shielded 8mm wires complement any engine with chrome, polish, or braided lines. A spiral wound conductor layered in two layers of a synthetic silicone blend jacketed with a braided tin coated copper cover and blue silicone boots offers protection up to 550 degrees.Note: Installation requires the use of an included grounding kit.

Small Block ChevyOver Valve Cover Wires A9720024 1974-80 HEI & 90° boots ..... 79.99 set A9720025 1974-90 HEI & 135° boots ... 79.99 set A9720026 1978-86 HEI & 90/180° boot 79.99 set

Pontiac V8Over Valve Cover Wires A9720029 1964-75 socket & 135° boots 79.99 set

A970105B

A970101K

A9720017

A970114R

A970120B

A9720025

Ignition Wires

Ignition Wires

En

gin

es &

Co

mp

on

en

ts

470

KK


1967-74 Date Coded Spark Plug Wire SetClassic Industries® stocks reproductions of the original style Delco Packard plug wires used with 1967-74 Firebird models. Each wire includes the original style lettering with the wording Packard TV R Suppression. All wires are date coded based on the production quarter of the vehicle. "1Q" indicates the fi rst half of the production model year and "3Q" indicates the 2nd half of the production year. Wiring sets are produced for Firebird models with original exhaust manifolds. * w/o unitized distributor Note: These are not for use with after market type headers or after market manifolds. Wiring may be applicable for use with other manifolds or headers but are not guaranteed to fi t. 3Q dated plug wires may be correct for use on vehicles manufactured in the fi rst months of the succeeding years production. 2026663 1967 L6-OHC 3-Q-66 ..... 75.99 set 2026671 1967 L6-OHC 1-Q-67 ..... 75.99 set 2352663 1967 V8 with AC 3-Q-66 ..... 78.99 set 2352671 1967 V8 with AC 1-Q-67 ..... 78.99 set 2350663 1967 V8 w/o AC 3-Q-66 ..... 78.99 set 2350671 1967 V8 w/o AC 1-Q-67 ..... 78.99 set 2026673 1968 L6-OHC 3-Q-67 ..... 75.99 set 2026681 1968 L6-OHC 1-Q-68 ..... 75.99 set 2354673 1968 V8 with AC 3-Q-67 ..... 78.99 set 2354681 1968 V8 with AC 1-Q-68 ..... 78.99 set 2354681 1968 V8 w/o AC 3-Q-67 ..... 78.99 set 2354681 1968 V8 w/o AC 1-Q-68 ..... 78.99 set 2026683 1969 L6-OHC 3-Q-68 ..... 75.99 set 2026691 1969 L6-OHC 1-Q-69 ..... 75.99 set 2354683 1969 V8 with AC 3-Q-68 ..... 78.99 set 2354691 1969 V8 with AC 1-Q-69 ..... 78.99 set 2354683 1969 V8 w/o AC 3-Q-68 ..... 78.99 set 2354691 1969 V8 w/o AC 1-Q-69 ..... 78.99 set 36435 1970 L6 3-Q-69 ..... 55.99 set 36436 1970 L6 1-Q-70 ..... 55.99 set 2354693 1970 V8 3-Q-69 ..... 78.99 set 2354701 1970 V8 1-Q-70 ..... 78.99 set 36437 1971 L6 3-Q-70 ..... 55.99 set 36438 1971 L6 1-Q-71 ..... 55.99 set 2360703 1971 V8, 455ci HO 3-Q-70 ..... 78.99 set 2360711 1971 V8, 455ci HO 1-Q-71 ..... 78.99 set 2362703 1971 V8, w/o 455 3-Q-70 ..... 78.99 set 2362711 1971 V8, w/o 455 1-Q-71 ..... 78.99 set 36439 1972 L-6 3-Q-71 ..... 55.99 set 36440 1972 L-6 1-Q-72 ..... 55.99 set 2364713 1972* V8 3-Q-71 ..... 78.99 set 2364721 1972* V8 1-Q-72 ..... 78.99 set 36441 1973 L6 3-Q-72 ..... 55.99 set 36442 1973 L6 1-Q-73 ..... 55.99 set 2364723 1973* V8 3-Q-72 .... 78.99 set 2364731 1973* V8 1-Q-73 .... 78.99 set 36443 1974 L6 3-Q-73 ..... 55.99 set 36444 1974 L6 1-Q-74 ..... 55.99 set 2364733 1974* V8 3-Q-73 .... 78.99 set 2364741 1974* V8 1-Q-74 .... 78.99 set

Includes correct coded production dates!Available from 1967-74Includes correct Packard TV R Suppression markingsOffi cially licensed by General Motors

1974-02 Spark Plug WiresSpark plug wires are a major component in the vehicles ignition system. Electrical failure can be greatly hastened by loose connections at the ignition coil(s), distributor, or spark plugs causing telltale corrosion at connectors. Over time this loosening can develop from quality variations in the wires themselves, or through normal engine vibration. Other causes include retainer failure, fl uid leakage onto the wires causing the wires to swell and soften, or even poor original routing (too close to exhaust components or components with sharp edges). When these conditions exist, and they may or may not cause a noticeable misfi re, the wires must be replaced immediately, or they will wreak havoc on other components such as ignition coils and nearby electronics, or exhaust system components such as oxygen sensors and catalytic converters. These replacement wires are tailored to fi t your specifi c application.6 CylinderQW801 1975-76 250-D ........................ 21.99 set QW821 1977-79 231 ............................ 28.99 set QW833 1980-81 231-A ........................ 28.99 set QW849 1982-84 2.8-1, L ..................... 29.99 set QW868 1985-89 2.8-S ......................... 28.99 set QW886 1989 3.8-7 (turbo) ............. 29.99 set QW923 1990-92 3.1-T ......................... 26.99 set QW795 1993-95 3.4-S ......................... 24.99 set QW1123 1995-99 3.8-K ......................... 24.99 set QW1375 2000-02 3.8-K ......................... 29.99 set 8 CylinderQW806 1974-76 all .............................. 34.99 set QW806 1977 350-R ........................ 34.99 set QW823 1977-78 305-U ........................ 31.99 set QW815 1977 350-R ........................ 34.99 set QW806 1976-79 400-Z ........................ 34.99 set QW815 1977-79 403-K ........................ 34.99 set QW843 1978 305-U ........................ 34.99 set QW823 1978-79 350-L ........................ 31.99 set QW806 1977-79 301-Y ........................ 34.99 set QW823 1979 305-G ........................ 31.99 set QW859 1980-81 301-T (w/hi perf) ...... 34.99 set QW806 1979-80 301-W ....................... 34.99 set QW925 1980 305-H ........................ 19.99 set QW806 1981 265-S ........................ 34.99 set QW859 1981 301-T, W ................... 34.99 set QW843 1982-86 5.0 ............................. 34.99 set QW893 1985-86 5.0-F ......................... 37.99 set QW892 1987-88 5.0 and 5.7 ................ 37.99 set QW895 1989-92 all .............................. 34.99 set QW986 1993 5.7 ............................. 52.99 set QW1066 1994-95 5.7 ............................. 68.99 set QW1117 1996-97 5.7 ............................. 69.99 set QW1219 1998-02 5.7 ............................. 51.99 set

Oem Style Spark Plug Wire Kits Designed To Replace The Original Wires For 1974-02 Firebird Models.

1982-89 Delco Spark Plug Wire SetsThe replacement Delco spark plug wires are a service replacement product and do not include the original style lettering or date codes. Each spark plug wire will replace your original to help keep your car running smoothly.D650 1982-83 2.5-F (LQ8), -2 (LL1) 36.99 set D651 1984-86 2.5-2 (LQ9) ................ 33.99 set D652 1982-84 2.8-1 (LC1) ................ 48.99 set D653 1982 5.0-7 (LV5) ................ 49.99 set D654 1982-86 5.0-H (LG4) ............... 47.99 set D654 1983-86 5.0-G (L69) ................ 47.99 set D655 1987 5.0-F, H (LG4) ........... 45.99 set D655 1987 5.7-8 ........................... 45.99 set D656 1985-89 2.8-S (LB8) ................ 39.99 set

Custom Fit for Your Application!7.0mm to Fit Original Wiring Looms!Plain Black Wires w/o Script for a Stock Look!Hi-Temp Silicone Jackets!

Limited Lifetime

Warranty

Flame Thrower 7mm Spark Plug WiresThese Flame Thrower high performance spark plug wires were created with the classic car in mind. They are manufactured in original 7mm size jackets to fi t stock wiring looms. With no markings or script of any kind on the wire, they maintain a stock appearance yet give you all the benefi ts of a high performance wire set including: 2 current paths-spiral wound stainless steel alloy winding and carbon impregnated fi berglass center core, low 500 ohm per foot resistance, silicone jackets to resist high temperatures, moisture, oil and chemicals. They also have EPDM rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks. Fiberglass reinforcing braid is added for strength and fl exibility. Lifetime Warranty-Made in USA.PX706101 1967-74 6 cyl. all................. 41.99 set PX708102 1967-74 Pontiac V8 ............. 44.99 set

Ignition Wires

Ignition Wires

QW843

QW806

PX706101

KK

En

gin

es &

Co

mp

on

en

ts

471

Valve Cover Spark Plug Wire RetainersReproduced exactly as original. The V8 set includes 4 insulated metal retainers which attach to valve covers using the lower valve cover bolts and also the hard plastic separators for other locations between the spark plugs and the distributor. The 400 CID set includes the correct retainers which attach to the valve covers, as well as the spark plug to distributor clips. Each set includes the correct amount of retainers.K0087 1967-74 400 CID ..................... 11.99 set

Chrome Wire LoomsBeautifully chromed, heavy gauge steel with easy snap in grommets eliminates the need for removing wires for quick installation.T9097 Hi Lift, 4 hole (2) 5-1/4" .......... 5.99 pr T4009 standard, 4 hole (2) 3-3/4" ....... 4.99 pr

T9097

PY123

PY126

1967-79 Spark Plug Retainer SetsReproduction spark plug retainer sets for 1967-79 Firebird models. These quality reproductions will have your engine ignition wires organized just like they came from the factory. These are designed for specifi c applications for correct wire routing.PY123 1967 without AC .............. 29.99 set PY123A 1967 with AC ................... 44.99 set PY124 1968-69 without AC .............. 78.99 set PY124A 1968-69 with AC ................... 78.99 set PY470F 1970 all ............................. 69.99 set PY126 1975-79 HEI .......................... 54.99 set

Ignition Wire Accessories

Ignition Wire Accessories

1979 Trans Am Valve Cover Wiring ClipKeep your wiring secured to the valve covers with this wiring backet/strap clip.TA4033 1979 .......................................... 7.99 ea

Custom Plug Wire Loom SetGet a clean custom look while protecting your ignition wires from chafi ng or contact with exhaust headers. Designed to fi t on most V8 engines. Includes polished billet aluminum wire looms, 8 feet of 1/2" stainless conduit, 16 chrome wire terminator end caps, and 16 wire protection sleeves. 42570 ball milled wire loom set ........ 129.99 set 42569 fl amed wire loom set .............. 129.99 set 42573 plain wire loom set ................. 129.99 set

42570

Clamp Style Wire SeparatorsOrganize your engine bay with Taylor clamp style wire separators manufactured from nonconductive type 6/6 nylon that won't melt, distort, fade or crack. Sets includes two 4 wire separators, two 3 wire separators, and two 2 wire separators. Available in four different colors. Stainless steel hardware included.7-8.2mm Wire Separators A970125C chrome ................................ 7.99 set A970125K black ................................... 11.99 set A970125R red ...................................... 11.99 set A970125B blue ..................................... 11.99 set 10.4mm Wire Separators A970126K black ................................... 13.99 set A970126R red ...................................... 13.99 set A970126B blue ..................................... 13.99 set

A970125C

A970126R

Spark Plug Wire Separator SetThis set of spark plug wire separators is made from high grade plastic which helps insulate the plug wires and reduce shorts and crosstalk. Includes two 4 wire separators, two 3 wire separators, and two 2 wire separators. MN2417 V8 ....................................... 2.49 set

Spark Plug Wire Support and Separator SetThese high grade chrome plated plastic support brackets attach to the valve cover bolts or studs to route the plug wires neatly from the distributor, over the valve covers, and to the plugs. Keeps wires away from hot underhood parts, insulates the plug wires, and reduces shorts and crosstalk. Includes four chrome support brackets, two 3 wire separators, and four 2 wire separators, as shown above. MN2418 V8 ......................................... 4.99 set

1967-68 Wire Loom HolderThis metal strip runs across the left side valve cover on 1967-68 models with AC. It is designed to secure engine wiring when its metal tabs are folded over. A8700107 1967-68 ................................ 14.99 ea

1967-74 Spark Plug Wire SeparatorsThese plastic spark plug wire separators keep the wires organized and prevent cross talk between wires. Available individually or as a 4 piece set with two 2 wire separators and two 4 wire separators.Note: Not for HEI applications. A8700109 1967 4 wire VC mount ... 2.99 ea A8700110 1967 3 wire triangle ....... 2.99 ea A8700111 1967-74 2 wire .................... 1.49 ea A8700112 1967-74 4 wire .................... .99 ea A8700113 1971-74 4 piece set .............. 5.99 set

A8700110

1968-81 Wiring Harness BracketsThese brackets attach to the valve cover bolts on the front and rear of the engine on vehicles with factory AC. Designed to secure the engine wiring harness to keep the engine bay uncluttered. A8700108 1968-81 ................................ 9.99 pr

En

gin

es &

Co

mp

on

en

ts

472

KK

Toll Free Order Line 800.854.1280Spark Plug Accessories

Spark Plug Accessories

Spark Plug Wire PullerThis handy tool is great for pulling spark plug wires quickly and easily without damage to the wire or the rubber boots. Y51500 ................................................ 4.99 ea

Spark Plug GappersGauges and gaps all types of spark plugs from 0.20" to .100" (.50mm to 2.53mm) Includes tapered edge for gauging spark plugs. Specially designed hole with fl ange adjusts side wire of plug without pressuring center electrode.Y67870 ................................................ 4.99 ea

Spark Plug Wire TesterWhen you want to quickly locate faulty plug wires, you need this tester. Now you can check spark plug wires without piercing or ruining the wires. If the light fl ashes, you have a sound and intact wire. If not it's time to replace. Y26900 ................................................ 11.99 ea

Spark Plug Wire PullerRemoves spark plug wire boots from plugs with minimal effort. Designed for use on most cars and trucks. Y51250 .................................................. 9.99 ea

Spark Plug Terminal PliersSafely removes spark plug cables. Prevents damage to cables when replacing. The handles and jaws are coated with heavy plastic for a sure grip.X135 ................................................... 9.99 ea

1967-92 Accel Spark Plugs!Accel’s patented race proven spark plugs are now available in a “shorty” confi guration. The overall length of each plug has been reduced 1/4” to 3/8” (depending on the specifi c spark plug) to gain critical air gap space between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install and remove the spark plugs in certain applications where there is not a lot of room to work with a socket or wrench. Set of 8.Note: *Sold in sets of four. Two sets requires for 8 cylinder applications.Pontiac 8 Cylinder 8197 1967 326 ........................... 34.99 set 8197 1968-70 350 2bbl ................... 34.99 set 8197 1968-70 400 RA .................... 34.99 set 8197 1970 400 exc RA .............. 34.99 set 8199 1972-76 400 4bbl ................... 34.99 set 8199 1972-76 455 ........................... 34.99 set 8199 1975-76 350 4bbl ................... 34.99 set 8199 1977 350 (P) ..................... 34.99 set 8199 1977-79 350 (L) ..................... 34.99 set 8199 1977-79 400 (Z) ..................... 34.99 set 8199 1978-79 301 4bbl (W) ........... 34.99 set 8199 1979-80 350 (X) .................... 34.99 set 8199 1980-81 265 (S) ..................... 34.99 set 8199 1980-81 301 (T, W) ............... 34.99 set 8199 1981 267 (J) ...................... 34.99 set Chevrolet 8 Cylinder 8199 1977-81 305 (7, G, H, S) ....... 34.99 set 8198 1985 305 TPI (F) .............. 34.99 set 8198 1986 305 (G) .................... 34.99 set 8199 1986 305 (H) .................... 34.99 set 8198 1986-87 305 TPI (F) .............. 34.99 set 8198 1986-87 350 iron heads (8) .... 34.99 set 04164S * 1986-87 350 alum heads (8) .. 34.99 set 8199 1988-92 305 (E, F) ................ 34.99 set 8199 1988-92 350 (8) ..................... 34.99 set

1967-02 E3® Spark PlugsWant to unlock more power from your engine and actually burn less gas? Through an intensive R&D process, E3 has created a spectacular new spark plug that creates the industry’s fastest spark growth and fastest combustion pressure rise, meaning it burns fuel more effi ciently to give you more power and increased fuel economy. E3’s patented design forces the spark discharge from one sharpened edge to another, and projects the spark forward into the combustion chamber, unlike traditional spark plugs, for the most consistent, powerful and effi cient burn possible! Sold individually.Pontiac 6 cylinder E3346 1967 230 I6 ...................... 5.99 ea E3346 1968-69 250 I6 ...................... 5.99 ea E3342 1970-71 250 I6 ...................... 5.99 ea E3341 1972-75 250 I6 ...................... 5.99 ea E3342 1976 250 I6 ...................... 5.99 ea E3342 1977-79 231 V6 ..................... 5.99 ea Pontiac 8 Cylinder E3352 1967 326 ........................... 5.99 ea E3352 1968-70 350 ........................... 5.99 ea E3352 1968-71 400 ........................... 5.99 ea E3352 1971 350 2bbl ................... 5.99 ea E3342 1971 350 4bbl ................... 5.99 ea E3352 1971 455 ........................... 5.99 ea E3342 1972-76 455 ........................... 5.99 ea E3342 1972-79 350 ........................... 5.99 ea E3342 1972-79 400 ........................... 5.99 ea E3352 1977-79 403 Olds .................. 5.99 ea E3342 1977-81 301 ........................... 5.99 ea Chevrolet 6 Cylinder E3341 1982-89 2.8L V6 .................... 5.99 ea E3341 1990-92 3.1L V6 .................... 5.99 ea E3342 1993-95 3.4L V6 .................... 5.99 ea E3344 1995-02 3.8L V6 .................... 5.99 ea Chevrolet 8 Cylinder E3342 1977-84 305 ........................... 5.99 ea E3341 1985 5.0L FI ..................... 5.99 ea E3342 1985 5.0L carb .................. 5.99 ea E3341 1986 5.0L.......................... 5.99 ea E3341 1987 5.7L iron heads ........ 5.99 ea E3348 1987 5.7L alum heads ...... 5.99 ea E3342 1987-92 5.0L.......................... 5.99 ea E3342 1988-92 5.7L.......................... 5.99 ea E3362 1993 5.7L.......................... 5.99 ea E3344 1994-97 5.7L.......................... 5.99 ea E3354 1998-02 5.7L.......................... 5.99 ea

Cool-It Plug Wire SleevesThis unique spark plug and ignition wire protector comes in four colors; red, blue, black and silver. These dual-purpose sleeves enhance performance, reduce misfi res, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fi ts most boots, is easy to install and - most importantly-is nonfl ammable. Cool-It Plug Wire Sleeves can be used in any temperature environment from street vehicles to race cars.4-PackTT14262 black ...................................... 39.99 set TT14261 red ......................................... 39.99 set TT14263 blue ........................................ 31.99 set TT14260 silver ...................................... 39.99 set

8199

Calibrated Ignition TestersAccurately check for spark in ignition systems without removing the spark plugs from the engine. Testers verify that energy from the spark plugs are efficient to fire. Attach the spark plug wire to tester end, clamp tester to engine as ground, then crank the engine and test for spark. It’s easy and fast!X2756 HEI ignition tester .................... 9.99 ea X2757 standard ignition tester ............. 9.99 ea

X2756 X2757

KK

En

gin

es &

Co

mp

on

en

ts

473Ignition Components

Spark Plug Hole Thread ChaserCleans and threads directly in the spark plug hole! Double ended for both 14mm and 18mm threads. Use with 13/16" spark plug socket.Y20200 ............................................... 7.99 ea

Brass Non-Magnetic Feeler GaugesIncludes 6 brass blades, 0.006" to 0.016". This nonmagnetic feeler gauge is designed to measure the clearance on electronic ignition systems where a nonmagnetic gauge is required. 1/2"W x 3-5/16"L.X2223 ................................................... 3.99 ea

Deluxe Feeler GaugesFeeler gauge set consists of 31 blades, including a brass 0.010 blade for use on electronic ignitions. Precision blades ensures accurate measurement. Blades from 0.0015" to 0.035" (0.038mm to 0.889mm) are approximately 1/2"W x 3-1/2"L. Y68100 ................................................... 8.99 set

Spark Plug Gapper & Feeler Gauge SetAll-in-one tool comes with 6 spark plug gap wires, an electrode bending tool, and 12 steel blades. Precision wires and blades can measure both spark plug and ignition system settings. Blades are approximately 1/2" wide by 3 1/2" long. Includes .025", .030", 034", 035", 040" and .045" gap wires, and 010", .012", .015", .016", .017", .018", .019", .020", 022", 024", 025" and .026" blades.Y67850 ................................................... 8.99 set

Ignition Components

1967-74 Chrome Ignition CoilReplacement chrome ignition coil is just what you’ll need to keep your electrical system operating effi ciently. This is a 60,000 volt coil.T9324 1967-74 .................................... 64.99 ea

Coil Bracket BoltAdd a touch of class to your coil bracket installation with an ARP bolt. Available in black oxide fi nished chrome moly or rust-proof stainless steel, as well as with a conventional hex head or compact 12-point (great for use with those coils mounted in tight, hard-to-reach places). Washers included.AR13232 black oxide hex head .......... 4.99 ea AR13231 black oxide 12-point ........... 4.99 ea AR43232 stainless hex head .......... 7.99 ea AR43231 stainless 12-point ........... 6.99 ea

PR-i Points Replacement Ignition SystemThis points replacement ignition system offers easy installation because you do not have to pull the distributor out of the engine to install. Eliminates breaker points maintenance, “points bounce” at high RPM and electronic dwell control for maximum ignition energy at high RPM with reduced current draw at low RPM. Mounts in the exact place of your ignition points in the distributor. The Hall effect sensor detects points cam lobes and provides stable timing. No shutter or magnetic wheel required. Features a two wire hookup to the coil and includes a precise digitally set RPM limiter (200 RPM steps from 5,200 to 7000 RPM) which you can set by using a fl at blade screwdriver! The unit has encapsulated construction using surface mount electronics; waterproof and highly resistant to vibration and shock. Includes instructions and troubleshooting guide. Compatible with most original equipment ignition coils and is 50-state street legal. Made in the USA.Pontiac V8 Engines577410 1956-74 single points ........... 118.99 ea

Chrome Coil CoverDress your engine with this all chrome coil cover. Fits most early model coils. Includes cover and attaching bracket. For use with small block engines.66120 small block ............................ 5.99 ea

E276

1967-81 Coil Holder BracketThis coil holder bracket is available designed to fi t 1967-81 models without HEI. Available zinc plated, stainless steel, chrome or cadmium plated. Cinch bolt included. E276 1967-81 zinc plated .............. 14.99 ea T9366 1967-81 chrome ................... 4.99 ea F253 1968-71 V8, cad plated ........ 44.99 ea

Spark Plug Index WashersThese soft copper washers help increase horsepower and reducing detonation. They allow the spark plugs ground and electrode opening to be indexed in their optimal position for better combustion and reduced hot spots on the electrode. Available for both tapered and fl at sealed 14mm spark plugs in packages of 30. Each set includes 10 washers in three different thicknesses. 10012 tapered indexing set ................. 29.99 set 10022 fl at indexing set ........................ 29.99 set

10012

Spark Plug Indexing ToolThis tool makes indexing spark plugs easier. Made from gold anodized billet aluminum, it accepts both tapered and fl at sealed 14mm spark plugs. The tool has knurled edges for hand held use or it can be locked into a vice on its fl at edges. Simply mark your desired ground electrode position and place index washers on the spark plug until the electrode lines up to the mark. 10052 indexing tool ............................ 22.99 ea

AR43232

En

gin

es &

Co

mp

on

en

ts

474

KK

Toll Free Order Line 800.854.1280Tune-Up Components

1974-92 OE Quality Cap & Rotor SetsDemand the best quality ignition components for your cherished vehicle and nothing less! Some competitor’s caps & rotors are made of materials that do not even meet OE specifi cations. Some competitor’s caps are made of PP (polypropylene) which has a much lower melting point (350°F) than the material in which our caps are made from and some are even made from incorrect molds. Because of this, the competitor’s caps can have a slightly smaller inside diameter, creating potential fi t problems as well potential melting/warpage problems. Our caps exceed the OEM specifi cations and are made from a blend of PBT (polybutylene terephthalate) and PET (polyethylene terephthalate). This material has a higher melting point (500° F) and also provides increased stiffness and resistance to warpage.OE Quality Cap & Rotor Sets-HEI SystemDR2003 1975-77 6 cylinder w/HEI ............................................. 24.99 set DR2004 1978-86 6 cylinder w/HEI ............................................. 29.99 set DR2008 1982-84 6 cylinder w/HEI ............................................. 29.99 set DR2001 1974-86 8 cylinder w/HEI ............................................. 24.99 set OE Quality Cap & Rotor Sets-Late styleDR2012 1985-92 6 cylinder ......................................................... 16.99 set DR2009 1985-86 8 cylinder ......................................................... 24.99 set DR2015 1987-92 8 cylinder ......................................................... 29.99 set

DR2004 DR2012

Q1002

These OE Quality Ignition Components for Breaker Point Ignition Systems Meet or Exceed OEM Specs.

1967-74 OE Quality Tune Up ComponentsYou can’t tell much about a distributor cap or rotor by just looking at it, because most of them look pretty much the same on the outside. Even so, there can be signifi cant differences in the materials used in the manufacture of distributor caps that affect the product’s performance on a vehicle. One competitor’s cap is made of materials that do not even meet OE specifi cations. The competitor’s cap is made of PP (polypropylene) which has a much lower melting point (350°F) than the material in which our caps are made from and they are made from incorrect molds. Because of this, the competitor’s cap had a slightly smaller inside diameter, creating potential fi t problems as well potential melting/warpage problems. Our caps exceed the OEM specifi cations and are made from a blend of PBT (polybutylene terephthalate) and PET (polyethylene terephthalate). This material has a higher melting point (500 degrees F) and also provides increased stiffness and resistance to warpage. You’ll fi nd that the same strict quality standards that make are Distributor caps the fi nest in the industry apply to our point sets and condensers.OE Quality Cap & Rotor SetsDR2027 1967-74 6 cylinder ......................................................... 12.99 set DR2028 1967-73 8 cylinder ......................................................... 19.99 set OE Quality Point SetsDR1077 1967-74 6 cylinder ......................................................... 9.99 set DR1075 1967-73 8 cyl ................................................................. 9.99 set DR1080 1967-74 8 cyl (uni-set) ................................................... 9.99 set OE Quality CondensersU1515 1967-74 6 cylinder ......................................................... 3.99 ea U1511 1967-73 8 cylinder ......................................................... 4.99 ea

Buy The Complete Kit and SAVE!Why replace just one component when you can buy peace of mind AND save money at the same time! Our kits come complete with OE quality distributor cap & rotor, OE quality points and OE quality condenser.Buy The 6 Cylinder Kit and SAVE!Q1001 1967-74 6 cylinder ......................................................... 24.99 kit Buy The 8 Cylinder Kit and SAVE!Q1002 1967-73 8 cyl ................................................................ 31.99 kit

1967-86 Professional Gold Cap & Rotor SetsProfessional Gold Quality Ignition Components features solid brass or copper inserts for longer life and maximum resistance to corrosion and electrical pitting, high mineral content and glass reinforced molding compound for outstanding dielectric strength and a solid brass rotor blades with coating to reduce radio interference.Breaker-Points Ignition SystemDR2028G 1967-73 8 cylinder ......................................................... 19.99 set HEI SystemsDR2004G 1978-86 6 cylinder w/HEI ............................................. 42.99 set DR2001G 1974-86 8 cylinder w/HEI ............................................. 36.99 set

DR2001G

DR2015G

DR2004G

1985-95 Professional Gold Distributor Caps & Rotor SetsProfessional Gold Quality Ignition components for late model features solid brass or copper inserts for longer life and maximum resistance to corrosion and electrical pitting, high mineral content and glass reinforced molding compound for outstanding dielectric strength, and a solid brass rotor blades with coating to reduce radio interference.DR2012G 1985-95 6 cylinder ......................................................... 19.99 set DR2009G 1985-86 8 cylinder ......................................................... 34.99 set DR2015G 1987-92 8 cylinder ......................................................... 29.99 set

Tune-Up Components

Solid brass or copper inserts for longer life

Solid brass rotor blades with coating to reduce radio interference

Glass reinforced molding compound for outstanding dielectric strength

Gold Features Include:

KK

En

gin

es &

Co

mp

on

en

ts

475Tune-Up Components

1967-02 Replacement Ignition CoilsOE quality coils featuring the same strict quality standards as our other ignition/engine management components.OE Quality Coil-Breaker Point Ignition SystemC819 1967-74 6 cylinder ......................................................... 24.99 ea C819 1967-74 8 cylinder ......................................................... 24.99 ea OE Quality Coil-HEI SystemC833 1974-86 w/red, white, blk wires .................................... 19.99 ea C834 1977-86 w/red, yellow, blk wires ..................................... 24.99 ea OE Quality Coil-Late StyleC846 1985-92 6 cylinder ......................................................... 19.99 ea C846 1987-95 8 cylinder ......................................................... 19.99 ea C849 1993-02 6 cylinder (3 required) ..................................... 24.99 ea C1098 1996-97 8 cylinder ......................................................... 34.99 ea C1144 1998-02 8 cylinder (1 per cylinder) ............................... 57.99 ea

1974-97 Control Modules for Electronic Ignition Vehicles.Note: Because of the many applications of control modules, use the photo to identify the module, or if you cannot identify by photo, call for more detailed application listings.OE Quality Control ModulesDR100 1974-80 8 cylinder ......................................................... 19.99 ea DR100 1975-80 6 cylinder ......................................................... 19.99 ea DR124 1980-81 6 cylinder ......................................................... 29.99 ea DR124 1981-86 8 cylinder ......................................................... 29.99 ea DR126 1982 4 cylinder ......................................................... 29.99 ea DR126 1982-84 6 cylinder ......................................................... 29.99 ea DR140 1985-92 6 cylinder ......................................................... 39.99 ea DR140 1987-92 8 cylinder ......................................................... 39.99 ea DR196 1993 8 cylinder ......................................................... 99.99 ea DR174 1994-95 8 cylinder ......................................................... 89.99 ea DR178 1996-97 8 cylinder ......................................................... 74.99 ea

C819

C834

C846C1098

C849 C1144

DR100 DR124

DR140 DR178

1967-74 Premium Performance Gold Quality CoilC819G 1967-74 6 cylinder ......................................................... 29.99 ea C819G 1967-74 8 cylinder ......................................................... 29.99 ea

C819G

Want Professional Quality? Go For The GOLD!Classic Industries® is proud to offer this World-Class PREMIUM line of ignition components. World-Class manufacturing Technology, high performance design and premium quality compounds make these ignition components the ULTIMATE choice for longer life and trouble free service. When you want ignition components that are one step above OE quality, go for the GOLD!

• Oil-Filled Coils• Increased number of wire windings for greater output voltage• Heavy duty insulator for longer life• Double outer laminations create a stronger magnetic fi eld for higher output voltage and spark energy

Tune-Up Components

1967-74 Distributor PointIf you own a 6 cylinder Pontiac you may want to replace your original points with an authentic AC Delco points package. We offer these OEM points for your 6 cylinder Pontiac engine. G9138 1967-74 6 cyl ....... 9.99 ea

1974-80 Control ModuleThis is an original AC Delco distributor control module for the years and models listed below. G9137 1974-80 export .... 40.99 ea

1967-86 GM Tune Up PartsOriginal AC Delco tune up parts for a variety of applications. These are genuine GM service replacement parts which may differ cosmetically from the originally installed part.Tune Up Kit - Points, Condenser, Rotor CapR303 1967-74 8 cylinder ......................................................... 35.99 kit Distributor CapsG7240 1967-74 8 cylinder ......................................................... 13.99 ea G7241 1974-86 8 cylinder, HEI ................................................. 13.99 ea G7242 1985-86 5.0 w/AT .......................................................... 17.99 ea Rotor CapsG6010 1967-74 8 cylinder ......................................................... 4.99 ea PointsD1060 1967-73 8 cylinder ......................................................... 22.99 ea CondensersG6043 1967-73 8 cylinder ......................................................... 6.99 ea

G7240R303

En

gin

es &

Co

mp

on

en

ts

476

KK


NEVER CHANGE POINTS AGAIN!NEVER CHANGE POINTS AGAIN!

Eliminates points and moving parts that wear out, while delivering twice the voltage to the spark plugs over stock to increase horsepower, fuel economy and plug life! Optimal performance can be achieved when used with the Flame Thrower 40,000 volt coil. Ignitor is concealed entirely within the distributor so you have no unsightly black box to clutter up your engine compartment. Easily installs in minutes with no complex wiring, is compatible with 12-volt negative ground systems, and it’s smog legal in all 50 states and Canada! Comes with a 30-month warranty.6 CylinderPX1162A 1967-74 6 cyl ................... 81.99 set 8 Cylinder with Point-Lobe Style SensorPX1181LSC 1967-74 8 cyl ................... 81.99 set 8 Cylinder with Hall-Effect Style SensorPX1181 1967-74 8 cyl ................... 79.99 set

Ignitor shownhere installed

30 Month

Limited

Warranty

Ignition box performance without the box. The Ignitor III is the most advanced points replacement set. It is literally an ignition box inside your distributor. It features multiple sparks throughout the entire RPM range and a REV limiter accurate to +/- 50 RPM which is set by you with an LED user feedback for rev limit confi rmation. The Ignitor III module generates 5 times more spark than points. This means more spark energy creating more horsepower and better mileage. The Ignitor III features include: adaptive dwell which maintains peak energy throughout the entire RPM range, reducing misfi res while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. Legal in all 50 states and Canada. Fits GM V8 single point type distributors.Note: Not available for 6 cylinder.PX71181 1967-74 ............................... 131.99 ea

The Ignitor II electronic ignition goes an extra step beyond for even more power and effi ciency! It senses levels of current in the coil, and uses a powerful micro controller to adjust the dwell to maintain peak energy throughout the entire RPM range. As engine RPM and operating conditions change, dwell time is increased or decreased to provide more energy at higher RPM, reducing misfi res while improving engine performance. Ignitor II develops nearly 4 times more available energy between 3000 and 5000 RPM, and double the available plug voltage! The Ignitor II’s higher RPM performance is maximized when used with the new Flame-Thrower II super low resistance (0.6 ohms) 45,000 volt coil, but the system is compatible with any induction coil. It comes with a 30-month warranty and is emissions legal in all 50 states and Canada!6 CylinderPX91162 1967-74 6 cyl ........................ 114.99 set 8 Cylinder with Hall-Effect Style SensorPX91181 1967-74 8 cyl ........................ 114.99 set

Pertronix

Flame Thrower HC 60,000 Volt CoilThe Flame Thrower HC (high current) coils have an E-Core design which is rated at 60,000 volts with an ultra low .32 primary resistance and has a High Current design for a rapid charge rate. Made from 6063 T5 aluminum, it effi ciently transfers heat to optimize energy output. The housing is black anodized for increased corrosion resistance and has a precision machined male high tension terminal and brass primary terminals. It is compatible with Ignitor II and Ignitor III systems as well as most capacitive discharge boxes. Standard threaded connections and mounting hardware are included. PX60103 0.32 ohm ............................... 69.99 ea

Flame Thrower Performance CoilsComplete your ignition upgrade with a Flame Thrower high performance coil. Best when used with the Ignitor Electronic Ignition Conversion, the Flame Thrower Hi Performance Coil fi ts existing coil brackets for a clean, factory look. Enables larger plug gaps for greater fuel effi ciency & more power. Available with either a chrome or black fi nish. Choose from a variety of voltages and primary resistance ratings.

40,000 Volt Coil - 1.5 & 3.0 ohmThese Flame Thrower coils are compatible with breaker point ignition systems or vehicles equipped with the original Ignitor system. Choice of 6 cyl or 8 cyl.Chrome Oil FilledPX40501 6 cyl 3.0 ohm .................... 35.99 ea PX40001 8 cyl 1.5 ohm .................... 39.99 ea Black Oil FilledPX40511 6 cyl 3.0 ohm .................... 34.99 ea PX40011 8 cyl 1.5 ohm .................... 34.99 ea Black Epoxy FilledPX40611 6 cyl 3.0 ohm .................... 41.99 ea PX40111 8 cyl 1.5 ohm .................... 41.99 ea

45,000 Volt Coil - 0.6 ohmThe Flame Thrower II coils are for use on vehicles equipped with the Ignitor II system. Chrome Oil FilledPX45001 4, 6 or 8 cyl ............................ 49.99 ea Black Oil FilledPX45011 4, 6 or 8 cyl ............................ 36.99 ea Black Epoxy FilledPX45111 4, 6 or 8 cyl ............................ 45.99 ea

45,000 Volt Coil - 0.32 ohmThe Flame Thrower III coils are for use on vehicles equipped with the Ignitor III system. Chrome Oil FilledPX44001 8 cyl ....................................... 44.99 ea Black Oil FilledPX44011 8 cyl ....................................... 39.99 ea

Flame Thrower 50,000 Volt HEI CoilsPertronix Flame Thrower 50,000 volt E-Core coils feature an optimized winding design to maximize spark gap current and available voltage. When teamed with the Flame Thrower module they produce 100% more energy across the spark plug gap compared to the OEM coil. Select the matching Flame Thrower module for your application to create a proven performance combo!Note: Replaces OEM coils with the same color wires listed. HEI In-Cap Mounted CoilPX3000 black/yellow/red wire ............... 44.99 ea PX3001 black/white/red wire ................. 49.99 ea HEI Remote Mounted CoilPX3002 1985-95 .................................... 44.99 ea

PX3002 PX3000 PX60130

Flame Thrower HV 60,000 Volt CoilsThe Flame Thrower HV (high voltage) coils have an E-Core design which is rated at a sizzling 60,000 volts and operates with no degradation of energy throughout the temperature ranges. Made from 6063 T5 aluminum, it effi ciently transfers heat to optimize energy output, and the housing is black anodized for increased corrosion resistance. Available in 3 different resistances for compatibility with most points and electronic ignition systems. Standard threaded connections and mounting hardware are included. PX60104 0.45 ohm ............................... 69.99 ea PX60115 1.5 ohm ................................. 69.99 ea PX60130 3.0 ohm ................................. 69.99 ea

PX40001 PX45011 PX44001

Performance Ignition ModulesThese performance ignition modules are direct replacements for GM computer controlled distributors. These modules provide enhanced high RPM performance and increase spark plug voltage when used with a corresponding Flame Thrower coil.Pertronix Flame Thrower ModulesPX2000 1974-81 4 pin, 6.9 amp ......... 49.99 ea PX20011 1981-87 7 pin, 6.0 amp ......... 54.99 ea PX20021 1987-92 8 pin, 6.0 amp ......... 51.99 ea Proform Modules66944C 1974-81 4 pin ....................... 19.99 ea

PX2000

PX20011PX20021

66944C



KK

En

gin

es &

Co

mp

on

en

ts

477


HEI Electronic Distributor Tune-Up SetThese Performance Tune-Up Sets have everything needed to perk up the performance of your stock Chevrolet HEI distributor. These sets include a street/strip 4-pin module and coil combination, premium rotor and cap, coil cover, adjustable vacuum advance canister, high performance advance kit, wire harness with capacitor, and complete installation hardware.Note: For use on Chevrolet V8 with a red/yellow coil wire.Pertronix Flame Thrower SetPX8000 black cap ............................ 119.99 set PX8001 red cap ............................... 119.99 set PX8002 blue cap .............................. 119.99 set Proform Set66945BKC black cap ............................ 84.99 set 66945RC red cap ............................... 84.99 set 66945BC blue cap .............................. 84.99 set

PX8001

Vacuum Advance LockoutThis vacuum advance lockout mounts to the distributor and is used when switching from a vacuum advance to a mechanical advance.PX9010 clockwise dist ............................ 4.99 ea PX9011 counterclockwise dist ................ 4.99 ea

PX9010

HEI High-Power Distributor Coil SetGet this 50,000 volt high-power distributor set in your choice of colored caps.

Complete Set66942B with blue cap ................... 49.99 set 66942BK with black cap ................. 49.99 set 66942R with red cap ..................... 49.99 set

Cap and Rotor Set66947BC blue .................................. 24.99 set 66947BKC black ................................ 24.99 set 66947RC red .................................... 24.99 set

66942B 66947RC

Flame Thrower Plug N Play Billet DistributorPlug ‘n play billet distributors are designed for maximum ignition performance and easy installation, all at a price that you can afford. Replace your outdated points or electronic distributor with this performance proven distributor. These vacuum advance standard deck height distributors feature the patented Ignitor II electronics and a CNC machined 6061 T-6 billet housing. Fits Chevrolet small block engines.Black CapPX100700 female terminals ................ 239.99 ea PX100710 male terminals ................... 244.99 ea Red CapPX100701 female terminals ................ 239.99 ea PX100711 male terminals ................... 244.99 ea

PX100700 PX100711

Flame Thrower HEI DistributorExperts agree that good HEI systems rely on a good module and a good coil. We believe that the combination of a great module and a great coil makes the Flame Thrower distributor the best! Operates without misfi res beyond 7500 rpm.... that’s 3000 rpm higher than most enthusiasts report with their stock HEI. Produces 67% more energy in the coil, delivers twice the energy across the spark gap allowing wider plug gaps (.050-.055). Note: Please specify red, blue or black cap when ordering.Chevrolet EnginesPX101 machined distributor ................. 244.99 ea PX102 cast distributor .......................... 224.99 ea Pontiac EnginesPX103 cast distributor .......................... 241.99 ea

12 Month Limited Warranty

Machined orCast Finish!

At last...a coil and module engineered to work together!

HEI Wire Harness and Capacitor66946C ............................................... 19.99 ea

Ignition FileFiles ignition points and other small objects. Thin blade with fi ne grid on both sides is ideal for removing carbon from points.X2153 .................................................. 2.99 ea

Performance Advance Curve SetThis Performance Advance Curve Set features precision machined chromoly weights and center plate to eliminate erratic timing. Three sets of springs, guide bushings, and complete installation instructions make recurving your HEI distributor easy.66948C ............................................... 5.99 ea

HEI Adjustable Vacuum AdvanceThis adjustable vacuum advance canister allows you to optimize ignition advance for maximum part-throttle performance and cruise-speed effi ciency.66952C ............................................... 15.99 ea

Flame Thrower Billet Slip-Collar DistributorThese Flame Thrower billet slip-collar distributors are designed to give maximum ignition performance and easy installation. Designed for small block Chevrolet engines, these distributors provide all the features and benefi ts that the complete line of Flame Thrower distributors offer. The slip-collar design fi ts either standard deck or tall deck applications.D105810 black cap .......................... 291.99 ea D105811 red cap ............................. 291.99 ea

red

blue

black


Magnetic Trigger Billet DistributorThese magnetic triggering billet distributors for SB Chevy engines contain a precision magnetic pick up coil and reluctor that produce a strong crisp signal even at extremely low RPM. The over molded pick up coil has excellent corrosion resistance and a standard tyco mate plug for easy wiring. This distributor is compatible with most capacitive discharge and magnetically triggered ignition systems. Distributors have a mechanical centrifugal advance. Available with black or red caps.Note: Must be used with an ignition box. Not legal for use on pollution controlled vehicles. PX300810 black cap .......................... 204.99 ea PX300811 red cap ............................. 204.99 ea

PX300811PX300810

D105810

En

gin

es &

Co

mp

on

en

ts

478

KK


1967-97 Remanufactured DistributorsClassic Industries® offers a full line of distributors for your Firebird. If your Firebird is having problems starting, has a rough idle or the performance is not what it use to be, it could be time to change your distributor. Each distributor is remanufactured and tested to guarantee you get the best quality distributor your money can buy.Note: Distributor cap and rotor not included.6 Cylinder EnginesD1621 1967 230 w/sngl vac ............. 49.99 ea D1621 1968-69 250 w/sngl vac ............. 49.99 ea D1612 1970 250 .............................. 44.99 ea D1637 1971-74 250 .............................. 59.99 ea D1692 1975-76 250 ............................... 121.99 ea D1693 1977 231 w/“Odd-Fire” dist. 129.99 ea D1694 1977 231 w/even fi re dist. .... 119.99 ea D1694 1978-81 231 w/sngl vac ............. 119.99 ea D1671 1980-81 231 w/o vac ................. 119.99 ea D1631 1982-84 2.8 exc. Canada ........... 99.99 ea D1630 1982-84 2.8 Canada ................... 129.99 ea D1631 1985-86 2.8 w/carb. (VIN X) .... 99.99 ea D1633 1985-86 2.8 w/EFI (VIN,S,W,9) 129.99 ea D1633 1987-89 2.8 ............................... 129.99 ea D1633 1990-92 3.1 ............................... 129.99 ea 8 Cylinder EnginesD1851 1967 326, 400 w/sngl vac..... 69.99 ea D1851 1968-74 350, 400 w/sngl vac..... 69.99 ea D1851 1971 455 w/sngl vac ............. 69.99 ea D1861 1972-74 400, 455 w/unitiz ign... 109.99 ea D1890 1974 400, 455 w/HEI ign ..... 129.99 ea D1890 1975-76 all ................................. 129.99 ea D1890 1977 301, 305 ...................... 129.99 ea D1895 1977-78 350 VIN L (chev) ........ 125.99 ea D1893 1977-78 350 VIN R (olds.) ........ 104.99 ea D1890 1977 350 VIN P (pont.) ........ 129.99 ea D1890 1977-79 400 .............................. 129.99 ea D1893 1977-79 403 .............................. 104.99 ea D1895 1978-79 305 .............................. 125.99 ea D1896 1978 350 VIN X (Buick) ...... 129.99 ea D1890 1979-80 301 .............................. 129.99 ea D1890 1980 265 .............................. 129.99 ea D1874 1980 301 w/high perf.(W72) 149.99 ea D1865 1980-81 305 w/o vac ................. 119.99 ea D1895 1980-81 305 w/vac .................... 125.99 ea D1871 1981 265, 301 ...................... 109.99 ea D1865 1982-84 5.0 w/o vac .................. 119.99 ea D1895 1982-84 5.0 w/vac ..................... 125.99 ea D1867 1985-86 5.0 VIN code F ............ 139.99 ea D1865 1985-86 5.0 VIN G, H exc. Can 119.99 ea D1895 1985-86 5.0 VIN H Can ............ 125.99 ea D1830 1987 5.0 VIN F, H exc. Can . 125.99 ea D1895 1987 5.0 VIN code H Can .... 125.99 ea D1830 1987-92 5.7 ............................... 125.99 ea D1830 1988-92 5.0 ............................... 125.99 ea D1832 1993-94 5.7 ............................... 219.99 ea D1803 1995 5.7 ............................... 199.99 ea D1833 1996-97 5.7 ............................... 249.99 ea

Distributors Components

Distributor Components

D1895D1692

D1865D1893

Pontiac HEI DistributorThis HEI distributor offers calibrated advance curves that are optimized for maximum combustion effi ciency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium dielectric red cap with brass terminals and a rotor cap.66953 ................................................. 194.99 ea

Chevy V8 Late Model Electronic DistributorIf your 1987 and later computer controlled Chevy engine is having problems starting, has a rough idle or the performance is not what it use to be, it could be time to change your distributor. This aftermarket distributor manufactured by Proform® is an all new late model distributor. 66938RC polished (red cap) ............... 184.99 ea 66939BKC unpolished (black cap) ........ 149.99 ea

Chevy V8 HEI Electronic DistributorAftermarket distributors in your choice of any high performance color. Each distributor includes a coil and colored cap. For use with H.E.I. V8 engines.66941BC polished, blue cap .............. 129.99 ea 66941BKC polished, black cap ............ 129.99 ea 66941RC polished, red cap ................ 129.99 ea 66941BKUC unpolished, black cap ........ 129.99 ea 66941TUC unpolished, tan cap ............ 129.99 ea

66941BC 66941BKC

G6000 66940C

66938RC 66939BKC

HEI Battery and Tach PigtailWhen installing an HEI distributor or repairing a broken lead, use this positive locking ten inch HEI pigtail lead. 170072 HEI pigtail connector .............. 9.99 ea

1977-97 New DistributorsGet consistent spark for maximum effi ciency, accurate timing, and peak performance at all RPM ranges! Made from 100% new parts that meet and exceed OE specifi cations, each distributor and it's components have been tested assuring quality and endurance that can be trusted. All distributors come complete with an OE quality distributor cap and rotor. For use in Chevrolet V8 engines. ND1008 1977-78 5.7L HEI w/vac. adv. 89.99 ea ND1008 1978-86 5.0L HEI w/vac. adv. 89.99 ea ND1004 1987-92 5.0L & 5.7L .............. 74.99 ea ND1022 1993-94 5.7L w/vented cap .... 127.99 ea ND1005 1995-97 5.7L .......................... 114.99 ea

ND1005

ND1008

Chevy V8 HEI Electronic DistributorIf your HEI equipped Chevy V8 is having problems starting, has a rough idle or the performance is not what it use to be, it could be time to change your distributor. This distributor is specifi cally designed for 5.7L high output engines. This distributor may be used for most high performance applications.With Cap and RotorG6000 black cap - GM .................... 209.99 ea 66940C brown cap - Proform ............ 89.99 ea Without Cap and Rotor66940WO Proform ................................ 94.99 ea

KK

En

gin

es &

Co

mp

on

en

ts

479

1970-76 Distributor Hold Down Clamp Correct clamp designed to hold the distributor housing assembly. For use with all 1970-76 L6 models.G9425 1970-76 .................................... 7.99 ea


1967-74 Distributor LeadThis is an original AC Delco replacement distributor lead. Replace your electrical components with AC Delco parts, you'll be glad you did! 12338662 1967-74 Pontiac V8 ............. 5.99 ea


1974 3 Way Distributor Vacuum TeeThis original replacement 3 way tee is for use with 5/ 32" hoses and is for use with all 1974 V8 engines. G5135 1974 .......................................... 2.99 ea

1969 Distributor Vacuum Lines Reproduction distributor vacuum lines for use with 1969 6 cylinder models with overhead cam.FDV6906 1969 OEM material ........... 16.99 ea FDV6906S 1969 stainless material ...... 19.99 ea

FDV6906S

Distributor StudThese premium grade studs, which are equipped with vibration-resistant J-form threads, in your choice of black oxide fi nished chrome moly or rust-proof stainless steel. Select from conventional hex or space-saving 12-point nuts. Washers included.

Chevrolet EngineBlack OxideAR13172 hex head ................................ 5.99 set AR13171 12-point ................................ 5.99 set StainlessAR43172 hex head ................................ 8.99 set AR43171 12-point ................................ 11.99 set

Pontiac EngineBlack OxideAR19172 hex head ................................ 4.99 ea AR19171 12-point ................................ 3.99 ea StainlessAR49172 hex head ................................ 10.99 ea AR49171 12-point ................................ 19.99 ea

Distributor WasherThe distributor washer is an integral part in maintaining proper clearance between the gear and housing assembly. Helps keep the shaft from shifting when properly installed. Recommended replacing when rebuilding. G6009 all 8 cylinder models. ..... 21.99 ea

Distributor Clamp WrenchReach around obstructions to turn distributor lock nut with this double ended wrench. Fits 1/2" and 9/16" lock nuts. Use adapter to join wrenches together or attach to 3/8" ratchet or extension.X104 ................................................... 27.99 ea

TA4066 G9426

K0054

1967-82 Vacuum AdvanceThe vacuum advance is a mechanism attached to the distributor which moves the breaker point or pickup coil plate when it receives vacuum generated by the engine. Replace the vacuum advance in your 1967-82 Firebird model.*Note: Except high altitude.DV1465 1967-68 400........................... 11.99 ea DV1465 1968 350, 400 w/Ram Air 11.99 ea DV1465 1969-72 350, 400 w/AT ......... 11.99 ea DV1465 1971-72 455........................... 11.99 ea DV1465 1973 400, 455 w/AT ......... 11.99 ea DV1811 1973 350........................... 9.99 ea DV1465 1973 350 w/AT ................. 11.99 ea DV1465* 1973-74 400 w/2 bbl. carb. .... 11.99 ea DV1465* 1974 455........................... 11.99 ea DV1811 1974 400, 455 w/2 bbl. .... 9.99 ea DV1847 1977 350-R ...................... 17.99 ea DV1846 1977 301-Y ...................... 9.99 ea DV1859 1978 305-U dist. 1103282 14.99 ea DV1836 1978 305-U dist. 1103281 16.99 ea DV1847 1978-79 403-K ..................... 17.99 ea DV1874 1979 350-L ....................... 18.99 ea DV1859 1979 305-G dist. 1103282 14.99 ea DV1836 1979 305-G dist. 1103281 16.99 ea DV1861 1979 301........................... 14.99 ea DV1859 1982 5.0L-H ..................... 14.99 ea

DV1465

1977-79 Trans Am Distributor Hold DownReproduction distributor hold down clamp for 1977-79 Trans Am models with Olds 403. Secures the distributor to the engine block.TA4046 1977-79 Olds 403 .................. 14.99 ea

1967-81 Distributor GasketsDistributor gaskets for 1967-81 Pontiac L6 and V8 models. Seals the engine block to the distributor base.TA4066 1967-81 4BBL V8 ................. 3.99 ea G9426 1970-76 L6 ............................ 1.99 ea

1964-79 Pontiac Distributor ClampReplacement distributor hold down clamp for 1964-79 Pontiac V8 engines. Manufactured to factory specifi cations from heavy gauge steel to provide an identical replacement for lost or damaged clamps.Note: For Pontiac engines only. Will not work with Oldsmobile 403 engines.A8700192 1964-79 ................................. 9.99 ea

1968-69 Distributor Vacuum Control ValveThese vacuum control valves are part of the CCS emissions system on 1968 V8 models and 1969 Ram Air III models with manual transmission. These valves control the distributor's vacuum retard and advance timing.Distributor Control Valve A8700102 1968 V8 w/MT ................. 99.99 ea A8700102 1969 Ram Air III w/MT ... 99.99 ea Distributor Control Valve Cap A8100301 1968 V8 w/manual ............ 9.99 ea A8100301 1969 Ram Air III w/manual 9.99 ea

Chrome Vacuum Advance CoverChrome plated steel cover that slides over factory vacuum advance units. Attaches with double sided tape. T4973 .................................................. 5.49 ea

A8700102 A8700301

Distributor Timing IndicatorDesigned to fi t all stock and aftermarket Chevrolet V6 & V8 distributors. The .062" thick steel degree plate attaches to the intake manifold under the distributor and the pointer clamps to the distributor housing. Allows quick, accurate timing changes without a timing light. Note: No further discounts apply. 226100 ................................................. 34.99 ea

Vacuum Advance Metal TubeCorrect metal tube which fi ts onto the intake and hose. For use with aluminum intakes only. Mounting clips included. K0054A 400, 455 only ........................ 21.99 ea K0054 all except 400, 455 ................ 23.99 ea

En

gin

es &

Co

mp

on

en

ts

480

KK


Starters

1967-95 Remanufactured StartersReplace your worn out starter with these quality remanufactured starters. They are remanufactured to original specifi cations and will install and function as original.6 Cylinder3664S 1970-74 ................................. 64.99 ea 3664S 1975-76 w/MT ....................... 64.99 ea 3508S 1975-76 w/AT ........................ 64.99 ea 3664S 1977-81 ................................. 64.99 ea 3664S 1982-86 151........................... 64.99 ea 3510MS 1982 173 VIN 1................ 69.99 ea 3664S 1983 151 to mid 1983 ...... 64.99 ea 3664S 1983 151 mid 1983-on ..... 64.99 ea 3510MS 1983 173........................... 69.99 ea 3664S 1984-86 151........................... 64.99 ea 6313MS 1984-89 173........................... 72.99 ea 3664S 1989 231........................... 64.99 ea 6313MS 1990 ................................. 72.99 ea 8 Cylinder3696S 1967 326........................... 69.99 ea 3505S 1968-76 350 w/std ................. 64.99 ea 3696S 1968-76 350 w/opt. HD ......... 69.99 ea 3696S 1967-79 400........................... 69.99 ea 3696S 1971-76 455........................... 69.99 ea 3505S 1977 301........................... 64.99 ea 3696S 1977 350 VIN P ............... 69.99 ea 3505S 1977 350 VIN R ............... 64.99 ea 3689S 1977-78 305 w/MT ................ 94.99 ea 3508S 1977-78 305 w/AT ................. 64.99 ea 3696S 1977-79 403........................... 69.99 ea 3689S 1978-79 350 Chev. engine w/MT 94.99 ea 3510S 1978-80 350 Chev. engine w/AT 67.99 ea 3504S 1979-81 265, 301................... 49.99 ea 3689S 1979 305 w/MT ................ 94.99 ea 3508S 1979 305 w/AT ................. 64.99 ea 3664S 1980 305........................... 64.99 ea 3689S 1981 305 w/MT ................ 94.99 ea 3508S 1981 305 w/AT ................. 64.99 ea 3689S 1982 305 VIN H w/MT .... 94.99 ea 3664S 1982 305 VIN H w/AT ..... 64.99 ea 3664S 1982 305 VIN 7................ 64.99 ea 3664S 1983 305 VIN H, S .......... 64.99 ea 3664S 1984 305 VIN H ............... 64.99 ea 3664S 1984-85 305 VIN H w/MT .... 64.99 ea 3664S 1984-86 305 VIN H w/AT ..... 64.99 ea 3664S 1984-86 305 VIN G ............... 64.99 ea 3664S 1985-90 305 VIN F w/MT .... 64.99 ea 3664S 1985-90 305 VIN F w/AT ..... 64.99 ea 3664S 1987 305 VIN H w/MT .... 64.99 ea 3664S 1987 305 VIN H w/AT ..... 64.99 ea 3664S 1988-90 305 VIN E w/MT .... 64.99 ea 3664S 1988-90 305 VIN E w/AT ..... 64.99 ea 3664S 1987-92 350........................... 64.99 ea

1993-01 Replacement StartersClassic Industries® offers direct replacement brand new starters for your Firebird. Designed to replace your worn out or non-working starter these will install and function just like original. 6 Cylinder - 231N6431 1995-97 ................................... 129.99 ea N6484 1998-01 ................................... 150.99 ea V8 - 350N6442 1993-94 w/Delco PG 250 Starter 123.99 ea N6470 1995-97 w/Delco PG 260 Starter 123.99 ea N6482 1998-01 ................................... 134.99 ea

3510S

1967-81 Genuine GM Remanufactured StartersOriginal AC Delco remanufactured starter motor. Replace your original worn out starter with a AC Delco starter. We offer these original style rebuilt starters for 1st or 2nd generation models. Maintain originality along with the reliability of a factory replacement. Aftermarket starters are good but they don't offer a cosmetically correct appearance. Each starter is completely remanufactured and tested before leaving the factory.Note: *Pontiac V8 except 326-350.No exchange requiredG9130* 1967-69 Pontiac V8 ................. 74.99 ea G9131 1967-68 Pontiac 326-350 ........ 83.99 ea G9130 1970-71 Pontiac 350 ................ 74.99 ea G9130 1970-75 Pontiac 400, 455 ........ 74.99 ea G9131 1972-75 Pontiac 350 ................ 83.99 ea G7245 1975-76 Chevrolet 250 w/AT .. 109.99 ea G9130 1976 Pontiac V8 ................. 74.99 ea G7244 1977 350-L w/AT .............. 109.99 ea G9131 1977 301............................. 83.99 ea G9130 1977 350-P, 350-R, 400, 403 74.99 ea G7245 1978-79 305-U, 305-G w/AT .. 109.99 ea G7245 1980 305-H ........................ 109.99 ea G7245 1981 267 Export, Canada ... 109.99 ea

Starters & Accessories

1998-02 F-Body LS1, LS2 and LS6 StartersBench tested to meet or exceed stated specifi cations, these high torque starters for use with LS1, LS2 and LS6 engines feature a 1.9 HP motor to easily crank high compression engines. Available in your choice of chrome or gold zinc fi nish, these starters offer easy bolt-in installation. Made in the USA with 100% new components.FC2014 1998-02 chrome ................... 171.99 ea FC2015 1998-02 gold zinc ................ 129.99 ea

FC2014

MSD DynaForce StartersThese MSD DynaForce starters are designed for severe duty, high compression applications. The 3.4 hp motors use a 4.4:1 gear reduction to easily start even an 18:1 engine with a lower current draw than traditional starters. Features a red powder coat fi nish and nickel plated solenoid with a three position adjustable mounting block so they can be clocked for easier installation. Small block Chevy models have a straight mount bolt pattern and work with 153 and 168 tooth fl ywheels. Made in USA. Note: LS1/LS7 starter not compatible with GTO LS engines. No further discounts apply.

5095 small block Chevy starter ........ 279.99 ea 5096 LS1/LS7 starter ........................ 294.99 ea 5097 326, 455 ci Pontiac starter ....... 384.99 ea

5095

5097

1967-92 High Torque Performance StartersHigh torque, light weight performance starters. Performance starters feature up to 200 ft. lbs. of torque, 4.4:1 gear reduction, billet aluminum adapter blocks, and only weigh 8 lbs! Made in USA.Pontiac/OldsmobileS9510 166 tooth/200 ft. lbs .............. 233.99 ea S9610 166 tooth/180 ft. lbs .............. 199.99 ea Pontiac/ChevyS9502 153 tooth/200 ft. lbs .............. 233.99 ea

1967-92 OEM High Torque StartersClassic offers high torque starters that will replace your original with upgraded performance and OEM appearance. Mounting method described below. Made in USA.S3655 1967-79 1 long bolt ............... 143.99 ea S3631 1970-81 1 long/1 short bolt ... 143.99 ea S3510A 1977-78 staggered pad .......... 143.99 ea S3631 1984-92 1 long/1 short bolt ... 143.99 ea

S3631

S3510A

S9510

S9502

KK

En

gin

es &

Co

mp

on

en

ts

481

Starters and Accessories

Starter Motor Replacement Brushes When rebuilding your original starter motor, it is usually necessary to replace the brushes. The brushes are the most commonly worn out part of the starter which can cause failure. These brushes have a 13/64" diameter hole. 4 required per starter motor. Each set includes 4 brushes. RX6004 1967-81 .................................. 3.99 set

Starter Motor Solenoid Heat ShieldThis heat shield is used for all standard (non-metric) solenoids on V8 model cars and trucks. Features easy mounting and is produced in stainless steel.DK1107 V8 non-metric ................... 17.99 ea

1967-97 Starter Solenoid The starter motor solenoid commonly needs replacing due to heavy use and heat which is generated from the engine and exhaust manifolds. G7255 1967-81 GM .......................... 46.99 ea SS304 1967-81 repro ........................ 19.99 ea SS327 1982-90 ................................. 19.99 ea WE404 1991-92 3.1, 5.0 ..................... 49.99 ea SS327 1991-92 5.7 ............................ 19.99 ea WE404 1993-95 3.4 ............................ 49.99 ea SS906 1995-97 3.8,5.7 ...................... 49.99 ea

Remote Control Starter SwitchUse to bypass the ignition switch on any engine with solenoid starter switch. Lets you crank the engine while working in the engine compartment. Includes 44" long leads. Connect from the positive terminal of battery to energizing terminal of solenoid. Use for generator, starter, electrical tests, setting ignition points, fuel pump tests, adjusting tappets and compression tests. Y20750 .................................................. 19.99 ea

1967-92 Gold Series Starter SolenoidThe gold series solenoids are made of high-temperature insulated wire for better heat resistance, nickel-plated mounting bracket for better ground and increased contact area on studs for higher electrical current capacity and longer life.SS304G 1967-81 ................................. 39.99 ea SS327G 1982-90 ................................. 31.99 ea SS327G 1991-92 5.7 ............................ 31.99 ea

SS327G

1967-81 Starter Motor Attachment BoltsReplacement bolts used on Firebird models with Pontiac and Chevrolet engines and manual transmissions. 3/8"-16 x 3-5/8".PontiacTA4020 1967-72 2 piece ....................... 9.99 set Chevrolet3733289 1978 305-U, 350-L w/M20 3.99 ea 3733289 1981 305 w/M24 ............... 3.99 ea

1977-81 Starter Motor BracesOver a period of years, the starter motor braces are usually lost or discarded when the starter is replaced. Without this brace, undue strain will occur to the starter motor body causing wear or damage. When this happens you will need to replace the starter.G5111 1977-81 Chevy small block ..... 5.99 ea

1967-74 Pontiac Starter BraceReproduction starter brace for 1967-74 Firebird/Trans Am models with Pontiac V8 engines. Make sure that you have the correct Pontiac starter brace that helps relieve the pressure that is put on the starter when being engaged or while driving.F12393 1967-74 326-455 ................... 21.99 ea

Starters & Accessories

G7255

1967-79 Starter Shims 5-piece starter shim set for various Pontiac models. (1) 1/16" shim, (2) 1/32" shims and (2) 1/64" shims. Used to shim the starter to the engine block.TA4021 1967-79 5 piece set ................ 8.99 set

1970-77 Pontiac Starter Brace Reproduction starter brace for 1970-77 models. This bolts to the end of the motor mount and the back of the starter for additional support. Identical to factory original.1253520 1970-77 ................................... 18.99 ea

1970-77 Starter Wire ClampReproduction of Pontiac coated starter wire clamp - bolts to the end of the motor mount to keep the starter wires away from the manifold on all Ram Air vehicles.1253521 1970-77 ................................... 16.99 ea

1964-77 Starter Solenoid Heat ShieldReproduction starter solenoid heat shield for various 1964-77 Pontiac models with 326-455 ci engines. The two piece riveted steel waffl e design provides superior thermal protection for starter solenoids on models without Ram Air exhaust manifolds. Designed for starters that mount on the driver side. A8700128 1964-77 ................................ 28.99 ea

Starter Heat Shield™ SetIn today’s high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, we offer a nonconductive strap-on heat shield with a highly-refl ective mylar surface. The Starter Heat Shield™ will refl ect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield™ is a universal set that fi ts all starters. TT1002 kit with straps ........................... 25.99 set

Hot Shot Starter SolutionThe solution for vehicles with starters that are hard to start when hot, or vehicles with old or worn out electrical systems. The “Hot-Shot” Plus model includes an engine bump switch which allows you to turn over the engine while working in the engine compartment.Note: No further discounts apply.30201 with engine bump switch ........ 64.99 ea 30202 without bump switch ............... 34.99 ea

Remote Starter SolenoidAllows you to position the starter solenoid any place you need to in order to make maintenance easier. Comes with of extra wire and connectors to do the job right.Note: No further discounts apply.30203 .................................................. 79.99 ea

En

gin

es &

Co

mp

on

en

ts

482

KK


1967-89 Quality Remanufactured AlternatorsWe offer a huge selection of remanufactured alternators, but sometimes it is more cost effective on late model vehicles to replace with a brand new unit. For this reason, we have chosen not to list remanufactured units on these late model vehicles. If your late model is not listed here, check our listings for brand new alternators. Remanufactured and Tested to OE Specifi cations! No Core Charge!Note: For proper identifi cation, you may need to check your VIN code on listings with suffi xes after the engine size.

AlternatorsInternal & External Regulator Alternator Indentifi cation Guide

The Delco SI series alternator are manufactured so that the rear half of the alternator case can be assembled to the front half of the case in any one of four positions. These positions are referred to as the “clock” positions. Clock positions are determined by viewing the alternator from the rear with the threaded mounting hole (adjusting ear) straight up. With this view, the terminal socket for the two wire plug-in connector will point to any one of the four available “clock” positions. Straight up is 12 o’clock, to the right is 3 o’clock, straight down is 6 o’clock and to the left is 9 o’clock. Having the different clock positions allows for the alternator to be mounted on the left side or right side of the engine. It can also be mounted right side up or upside down depending on the clock position. This allowed for the SI series alternator to be used on many different applications.

Alternator Conversion AdaptorsEasy-to-use conversion plugs are designed to adapt your wire harness to upgrade your charging system with a later model, internally regulated alternator.CA27555 external regulator to 1985 & earlier “SI” type alternator ......... 19.99 ea CA37787 external reg. harness to 1986 & later “CS130” type alternator ..... 24.99 ea CA37796 1985 & earlier “SI” harness to “CS130” type alternator .......... 21.99 ea

Connector Socket

Battery Terminal Battery Terminal

1969-85 1986-Present

Battery Terminal

Connector Socket

Connector Socket

External RegulatorExternal Regulator Internal Regulator "SI" Type

Internal Regulator "SI" Type

Internal Regulator "CS" Type

Internal Regulator "CS" Type

1963-74

adjusting ear

pivot ear

3 o’clock

6 o’clock

9 o’clock

12 o’clock terminal socket

Clocking Position Indentifi cation Guide

Alternators

6 CylinderExternal Regulator7122 1967 55A 230 all ........................................ 69.99 ea 7122 1968-69 55A 250 all ........................................ 69.99 ea Internal Regulator7127U6 1982 63A 2.8/173 without AC ......................... 74.99 ea 7137U6 1982 70A 2.8/173 with AC .............................. 89.99 ea 7127U6 1983-84 63A 2.8/173 without AC ......................... 74.99 ea 7273U6 1983-84 78A 2.8/173 with AC or rear defrost ...... 99.99 ea 7273U6 1985 78A 2.8/173 without AC, 1st design ....... 99.99 ea 7273U9 1985 78A 2.8/173 without AC, 2nd design...... 99.99 ea 7273U6 1985 78A 2.8/173 with rear defrost, 1st dsgn .. 99.99 ea 7273U9 1985 78A 2.8/173 with rear defrost, 2nd dsgn . 99.99 ea 7290U6 1985 108A 2.8/173 with AC .............................. 118.99 ea 7273U9 1986 78A 2.8/173 without AC or rear defrost . 99.99 ea 7290U6 1986 108A 2.8/173 with AC or rear defrost ...... 118.99 ea 7860U11 1987-89 100A 2.8/173 all ........................................ 107.99 ea 7860U11 1990-92 100A 3.1/189-T all ........................................ 107.99 ea 7127U3 1977 63A 3.8/231 without AC ......................... 74.99 ea 7127U3 1978-81 63A 3.8/231 without AC ......................... 74.99 ea 7127U3 1977-80 63A 3.8/231 with AC .............................. 74.99 ea 7127U12 1980 63A 3.8/231 with AC and rear defrost .... 74.99 ea 7137U12 1981 70A 3.8/231 with AC or rear defrost ...... 89.99 ea 7805U5 1989 120A 3.8/231-7 turbo ................................... 129.99 ea 7127U9 1970-74 63A 250 all ........................................ 74.99 ea 7135M 1971-74 80A 250 HD option ........................... 104.99 ea 7127U9 1975-76 63A 250 all ........................................ 74.99 ea

8 CylinderExternal Regulator7122 1967 55A 326 all ........................................ 69.99 ea 7122 1968 55A 350 all ........................................ 69.99 ea 7122 1969 55A 350 all ........................................ 69.99 ea 7122 1967-68 55A 400 all ........................................ 69.99 ea Internal Regulator7145U6 1980 63A 4.3/265 with AC, optional 1st dsgn . 51.99 ea 7127U12 1980-81 63A 4.3/265 all ........................................ 74.99 ea 7137U12 1980-81 70A 4.3/265 with AC, optional 2nd dsgn 89.99 ea 7127U9 1977-79 63A 4.9/301 all ........................................ 74.99 ea 7127U12 1980-81 63A 4.9/301 all ........................................ 74.99 ea 7137U12 1980-81 70A 4.9/301 with HD option .................. 89.99 ea 7127U9 1977 63A 5.0/305-U all ........................................ 74.99 ea 7127U3 1978-79 63A 5.0-U,G all ....................................... 74.99 ea 7127U3 1980 63A 5.0/305-H all w/o elec trunk release .... 74.99 ea 7127U12 1980 63A 5.0/305-H with electric trunk release .. 74.99 ea 7137U3 1981-82 70A 5.0/305-H 4bbl, w/AC or rear defrost . 89.99 ea 7127U3 1981-84 63A 5.0/305-H 4bbl, without AC ............... 74.99 ea 7134U3 1982 85A 5.0/305-H 4bbl, with HD option ........ 89.99 ea 7137U3 1982 70A 5.0/305-7 4bbl, all .............................. 89.99 ea 7134U3 1982 85A 5.0/305-7 4bbl, with HD option ......... 89.99 ea 7137U3 1983 70A 5.0/305-S FI, all .................................. 89.99 ea 7134U3 1983 85A 5.0/305-S FI, with HD option ............ 89.99 ea 7273U3 1983-84 78A 5.0/305-H 4bbl, with AC ..................... 99.99 ea 7273U6 1985 78A 5.0/305-G HO, w/o AC 1st design ...... 99.99 ea 7127U3 1985 63A 5.0/305-G HO, w/o AC 2nd design ..... 74.99 ea 7273U9 1985 78A 5.0/305-G HO, with rear defroster ...... 99.99 ea 7127U3 1985 63A 5.0/305-H 4bbl, w/o AC, 1st design .... 74.99 ea 7273U9 1985 78A 5.0/305-H 4bbl, w/AC, 1st design ....... 99.99 ea 7287U9 1985 120A 5.0/305-H 4bbl, w/HD option ............. 118.99 ea 7273U9 1985-86 78A 5.0/305-H 4bbl, w/o AC, 2nd design ... 99.99 ea 7273U9 1985-86 78A 5.0/305-H 4bbl, w/rear defrost ............ 99.99 ea 7273U9 1986 78A 5.0/305-G HO, without AC ................. 99.99 ea 7127U9 1969 63A 5.7/350 all ........................................ 74.99 ea 7127U9 1970-76 63A 5.7/350 all ........................................ 74.99 ea 7135M 1970-76 80A 5.7/350 with HD option .................. 104.99 ea 7127U9 1977 63A 5.7-P,R all ........................................ 74.99 ea 7127U3 1978-79 63A 5.7/350-L all ....................................... 74.99 ea 7127U9 1969-76 63A 6.6/400 all ........................................ 74.99 ea 7135M 1969-76 80A 6.6/400 with HD option .................. 104.99 ea 7127U9 1977-79 63A 6.6/400 all ........................................ 74.99 ea 7127U9 1977-79 63A 6.6/403 all ........................................ 74.99 ea 7127U9 1971-76 63A 7.5/455 all ........................................ 74.99 ea 7135M 1971-76 80A 7.5/455 with HD option ................. 104.99 ea

7127U3

KK

En

gin

es &

Co

mp

on

en

ts

483

MSD DynaForce AlternatorsDynaForce blue-printed alternators cover your electrical needs whether it's a high output Street Series unit for a high feature street rod, or a low output, low drag Track/Racing unit for a purpose built race car. Street Series alternators are offered with chrome, black, and natural fi nishes and are designed to fi t most GM bracket systems from the 1960's to the 80's with a simple one wire hook up. Racing alternators are available in a 50 amp Denso style or 100 amp GM style and are compatible with 12 and 16 volt electrical systems thanks to an adjustable voltage regulator. They feature the same one wire hook up and a red wrinkle fi nish. Every alternator assembly is tested and is delivered with proof of performance. Made in USA.Note: No further discounts apply.Street Alternators 5321 120 amp black fi nish ...................................................... 254.99 ea 5361 160 amp black fi nish ...................................................... 299.99 ea 5322 120 amp chrome fi nish .................................................. 274.99 ea 5362 160 amp chrome fi nish .................................................. 319.99 ea

Alternators

1967-02 Performance AlternatorsClassic offers quality replacement alternators for 1967-02 Firebird models. We also offer performance alternators that offer higher amp output than stock replacements. Made in USA.External RegulatorS7102 1967-69 60 amp ................................................. 127.99 ea Internal RegulatorS7127 1970-82 60 amp all ............................................. 121.99 ea S8002 1983-85 100 amp all ............................................ 132.99 ea S8002 1986 100 amp 5.0L ........................................ 132.99 ea S7802 1987 105 amp 5.0L, 5.7L ................................ 148.99 ea S7860 1987-92 105 amp 2.8L, 3.1L ................................ 148.99 ea S7861 1988-92 105 amp 3.1, 5.7L ................................. 149.99 ea S7864 1993-94 105 amp 5.7L ........................................ 292.99 ea S8114 1993-97 105 amp 3.4L ........................................ 148.99 ea S7805 1995-97 140 amp 5.7L LT-1 ................................. 292.99 ea S48242 1998-02 150 amp 5.7L LS-1 ................................ 244.99 ea Hi Amperage with Internal RegulatorS8002 1967-82 100 amp all ............................................. 132.99 ea S47294 1983-85 140 amp all ............................................. 174.99 ea S47294 1986 140 amp 5.0L ......................................... 174.99 ea S47802 1987 140 amp 3.1, 5.7L .................................. 174.99 ea S47860 1987-92 140 amp 3.1, 3.1L .................................. 174.99 ea S47861 1988-92 140 amp 3.1, 5.7L .................................. 174.99 ea S47864 1993-94 200 amp 5.7L ......................................... 386.99 ea S48114 1993-97 140 amp 3.4L ......................................... 174.99 ea S47805 1995-97 200 amp 5.7L LT-1 ................................ 386.99 ea

1983-02 OE Quality New AlternatorsDirect replacements for your original alternator. These brand new (NOT remanufactured) alternators will install and function as original. We offer a wide selection of different applications depending upon your year and engine. Appearance may differ slightly from original. If your earlier model Firebird is not listed here, check our listings for remanufactured units.Note: You may need to check your VIN code on listings with suffi xes after the engine size.

1970-86 1-Wire GM AlternatorReproduction chrome alternators that match the original and offer the amperage you need. Select from a variety of alternators listed below. Improve the overall appearance of your engine compartment with a chrome alternator. Each alternator is a 1-wire design, with an internal regulator in chrome or satin fi nish. Made in USAInternal RegulatorS7127 1970-86 satin 70 amp ........................................... 121.99 ea S17127 1970-86 chrome 70 amp ........................................... 148.99 ea S17294 1970-86 chrome 100 amp ......................................... 153.99 ea S37293 1970-86 chrome 140 amp ......................................... 196.99 ea

S17127 S17294

115 Amp Mini AlternatorThis 115 amp mini alternator is a great addition for any modifi ed or high performance engines. Available in standard or chrome style. Includes internal regulator. Made in USA.Internal RegulatorS82071 standard ............................................................................. 184.99 ea S182071 chrome .............................................................................. 234.99 ea

6 CylinderInternal RegulatorN7294U6 1983-84 94A 2.8/173 with HD option ............... 93.99 ea N7294U6 1985 94A 2.8/173 without AC, 1st design .... 93.99 ea N7294U9 1985-86 94A 2.8/173 without AC, 2nd design... 93.99 ea N7860U11 1987-89 105A 2.8/173 all ..................................... 93.99 ea N7860U11 1990-92 105A 3.1/189-T all ..................................... 93.99 ea N8114U3 1993-95 105A 3.4/207 all ..................................... 93.99 ea N7911U4 1989 120A 3.8/231-7 turbo ................................ 134.99 ea N8200U11 1995-99 105A 3.8/231 all ..................................... 124.99 ea N8272U11 2000-02 105A 3.8/231 all ..................................... 139.99 ea

8 CylinderInternal RegulatorN7294U3 1983-84 94A 5.0/305-H 4bbl., with AC ................. 93.99 ea N7294U3 1984 94A 5.0/305-G HO, all ............................. 93.99 ea N7294U6 1985 94A 5.0/305-G HO, w/o AC .................... 93.99 ea N7294U9 1985-86 94A 5.0/305-H 4bbl., all .......................... 93.99 ea N7294U9 1985-86 94A 5.0/305-G HO, w/AC ....................... 93.99 ea N7294U9 1986 94A 5.0/305-G HO, w/o AC .................... 93.99 ea N7290U9 1985-86 108A 5.0/305-F MFI, all ........................... 129.99 ea N7858U11 1987 105A 5.0/305-H 4bbl., all .......................... 93.99 ea N7858U11 1987 105A 5.0/305-F 4bbl., all .......................... 93.99 ea N7917U11 1988-89 105A 5.0-E,F EFI/MFI, all .................... 93.99 ea N7861U11 1990-92 105A 5.0-E,F EFI/MFI, all .................... 93.99 ea N7858U11 1987 105A 5.7/350-8 all ..................................... 93.99 ea N7917U11 1988-89 105A 5.7/350-8 all ..................................... 93.99 ea N7861U11 1990-92 105A 5.7/350-8 all ..................................... 93.99 ea N8119 1993-94 124A 5.7/350-P all, 1st design .................. 150.99 ea N8172U7 1994-97 140A 5.7/350-P all, 2nd design ................. 150.99 ea N8242U5 1998-02 102A 5.7/350-G all ..................................... 129.99 ea

Alternators

5362

N8114U3

S8002S7127

S182071S82071

En

gin

es &

Co

mp

on

en

ts

484

KK


1967-02 Alternator PigtailUsually burnt or corroded the alternator pigtail is a very important item in keeping your vehicles charging system operating correctly. Replace the alternator pigtail in your 1967-02 Firebird model if it is burnt or corroded with this fi ne reproduction.WE209 1967-74 ................................... 2.99 ea WE205 1970-88 ................................... 3.99 ea 494 1995-02 ................................... 26.99 ea

WE205

WE209

1967-72 Voltage RegulatorReplacement external voltage regulators for 1967-72 models. Available in black or chrome.C19515 1967-72 black .................... 59.99 ea VR635C 1967-72 chrome ................. 38.99 ea

1967-97 Voltage RegulatorExternal regulators are normally located on the fenderwall in the engine compartment. Internal regulators are mounted in the alternator housing. Fits 1967-97 Firebird models.VR715 1967-70 external regulator ...... 49.99 ea VR723 1969-88 internal regulator ....... 11.99 ea G7235 1967-70 63 amp GM ............... 67.99 ea G7236 1971-81 62 amp GM ............... 19.99 ea VR780 1986 2.5L-2, w/85 amp. alt 45.99 ea VR723 1986 108 amp. alt ............... 11.99 ea VR723 1987 37,42,56,66,78,94 alt . 11.99 ea VR781 1987 85,100,105,108 alt ..... 42.99 ea VR723 1988 78, 94 amp. alternator 11.99 ea VR781 1987-97 all ............................... 42.99 ea

VR715

VR723

C19515 VR635C

VR781

Alternator Components

1967-86 Chrome Alternator Case SetReplace the alternator case with this alternator case set. For use with external or internal regulators. 66440 1967-72 external .................... 39.99 set 66441 1973-86 internal ..................... 64.99 set

Alternator StudARP’s “bulletproof ” alternator studs are made from a premium grade 8740 chrome moly steel alloy and heat treated to a nominal 200,000 psi tensile strength. They are very rigid and won’t bend under the stress, eliminating problems with alternator pulley alignment. Available in 5" and 5-1/4" lengths. Includes a 12-point nut and fl at washer. 1" coarse thread on one side and 1" fi ne thread on the other side.AR351 7/16" 5" long ........................... 9.99 set AR352 7/16" 5-1/4" long ..................... 9.99 set

1967-72 Alternator Housing BoltsReproduction alternator assembly bolts. These bolts hold the two halves of the alternator housing/case together. Available in 4 piece sets with phosphate or silver zinc plating.1253554 1967-72 phosphate plating .... 7.99 set 1253555 1967-72 silver zinc plating .... 7.99 set

1253554

66440

1967-80 Alternator Bracket SpacerReplacement GM alternator bracket spacer which was used on all 1967-80 V8 Firebirds with 42, 55 and 61 amp alternators, and 1970-75 6 cylinder Firebirds. Cut to length as required.3825451 1967-80 .................................... 2.99 ea


1967-94 Chrome AlternatorsHigh quality, triple chrome plated alternators will enhance the look of your engine compartment. Available to fi t most Firebirds from 1967-94. These alternators are high quality triple chrome plated versions of the originals. Available for models with or without air conditioning.External RegulatorS17102 1967-69 70 amp 6 cyl & V8 .. 153.99 ea Internal RegulatorS17127 1970-82 70 amp all ................ 148.99 ea S17294 1983-86 100 amp 2.8L w/o AC 153.99 ea S17294 1983-86 100 amp 305, TPI ...... 153.99 ea S17290 1983-86 140 amp 2.8L w/AC . 217.99 ea S17802 1987 105 amp 3.1, 5.7L ..... 196.99 ea S17860 1987-92 105 amp 3.1, 3.1L ...... 194.99 ea S17861 1988-92 105 amp 3.1, 5.7L ..... 200.99 ea S17864 1989 140 amp 3.8L Turbo .. 334.99 ea S17864 1993-94 140 amp 5.7L ............. 334.99 ea

S17102

"Delco Remy" markings

1998-02 F-Body LS1 AlternatorsBench tested to meet or exceed stated specifi cations, these alternators for 1998-02 LS1 engines are available in stock 105 amp rating or high output 140 amp rating in chrome, polished, black and cast fi nishes. A direct bolt-in replacement for stock components. Made in the USA with 100% new components.FC2001 1998-02 105 amp, chrome ..... 179.99 ea FC2002 1998-02 105 amp, polished .... 189.99 ea FC2003 1998-02 105 amp, cast ........... 142.99 ea FC2004 1998-02 140 amp, chrome ..... 199.99 ea FC2005 1998-02 140 amp, polished .... 199.99 ea FC2006 1998-02 140 amp, black ........ 179.99 ea

FC2001

FC2006

1967-72 Reproduction Voltage RegulatorOER® reproduction OE style voltage regulator which replaces the original units on 1967-72 models. This 63 amp regulator features the “Delco Remy” markings. For use with external regulator models. Pre-packaged in OER® box.1119519 1967-72 63 amp .................. 69.99 ea

l

KK

En

gin

es &

Co

mp

on

en

ts

485


14716

14717

Terminal Cap and RetainerAlternator wire terminal cap and retainer used on most all vehicles equipped with a GM threaded-post type alternator. The retainer attaches behind the alternator post lead and has the clip edge to accept the cap. These protective pieces are made of injected molded plastic and each retainer is color coded to match the cap.14716 black cap and retainer .............. 14.99 set 14717 red cap and retainer .................. 14.99 set

1967-72 Rear Alternator Rubber BootReproduction of the rubber boot which is located on the wiring loom where it plugs into the rear of the alternator. This is an excellent reproduction of the original rubber boot. K0105 1967-72 .................................... 2.99 ea

1967-69 Rear Alternator Mounting BracketReproduction of the rear alternator mounting bracket used on 1967-69 Firebirds with V8 engines and power steering.C869131 1967-69 ................................ 23.99 ea

1967-69 Front Alternator Mounting BracketReproduction of the front alternator mounting brackets used on 1967-69 Firebirds with V8 engines and power steering.C869121 1967-68 ................................ 21.99 ea C963131 1969 ..................................... 21.99 ea

1967-70 Alternator Pivot BracketReproduction of the alternator pivot mounting bracket used on 1967-70 Firebirds with V8 engines and power steering.C869111 1967-70 ................................ 14.99 ea

1969-70 Alternator Mounting SetComplete mounting set includes mounting bracket, bolt and spacer. Can be used with all Pontiac V8s with 1969 and up style timing covers. Popular with Ram Air and race cars. For use on Pontiacs without power steering. PY11 1969-70 ................................... 44.99 set

1977-86 Upper BracketThis original bracket was factory installed on 1977-86 Firebird models with small block Chevrolet engines.

1977 305, 350-L1978-79 305-G, 305-H, 305-U, 350-L1979-81 305-G, 350-L1982-86 305

14081227 1977-86 ................................. 24.99 ea

1988-92 Alternator BracketReplace your missing or broken alternator bracket with this original GM unit. This is the correct alternator and power steering pump bracket found on all 1988-92 Firebire models. G5755 1988-92 V8 ........................... 70.99 ea

1989-92 Alternator BracketCorrect replacement alternator bracket found on all 1989-92 Firebird models with the 5.0E, 5.0F, and 5.7-8 engines. G7265 1989-92 .................................... 4.99 ea

1966-74 Alternator Code StampsTo guarantee that vehicles were correctly assembled, parts were marked with specifi c codes to make them easy to identify. Alternators were commonly stamped with black or dark purple paints and inks. These reproductions duplicate the alternator code stamps used on 1966-74 Pontiac models. A8700185 1966-70 XC 37 amp w/o AC 12.99 ea A8700186 1966-70 XB 55 amp w/AC ... 12.99 ea A8700187 1971-74 SN 37 amp w/o AC 12.99 ea

A8700186

A8700185

1998-02 Rear Alternator BraceOriginal GM rear alternator brace is mounted on the rear of the alternator for support.G4283 1998 6 cyl. ........................ 9.99 ea G4286 1998-02 8 cyl. ........................ 20.99 ea G4284 1999-02 6 cyl. ........................ 9.99 ea

G4283

G4286

G4284

1970 Alternator Bracket SetHigh quality reproduction alternator mounting bracket set for 1970 Firebird/Trans Am. These brackets were used on 350, 400 and 455 ci RA III and RA IV and HO models with power steering. Designed to replace GM part numbers 480515 and 480517. A8700123 1970 bracket set ............... 99.99 set


C869121

hi performance crate engines from gm performance...

Documents