hi-mold6500 - lichronmaskin.lichron.se/uploads/extrafiles_file_14.pdf · hi-mold6500 has adopted...
TRANSCRIPT
Hi-MOLD6500HYUNDAI WIA Vertical Machining Center for Die and Mold
The Vertical Machining Center Hi-MOLD6500 by Huyndai WIA CORP, the national (Kor) tool maker with years of expertise and the latest technology, are high-performance equipment for processing high quality molds.
Technical Leader Hi-MOLD6500mm(in)
kg(lb)
-
r/min
kW(HP)
EA
mm(in)
m/min
1,200×650 (47.2″×25.6″)
1,000 (2,205)
BCV40/BBT40
20,000 [24,000]
22/18.5 (30/25) [22/18.5 (30/25)]
30
1,100/650/550 (43.3″/25.6/21.7″)
40/40/40
Table Size
Max. Load Capacity
Spindle Taper
Spindle Speed
Spindle Output
No. of Tools
Travel(X/Y/Z)
Rapid Feed Rate
[Option]
State-of-the-art Technology for Machining Precision Molds
Hi-MOLD6500● Bridge type machining center for utmost quality of molding
● High-precision spindle design with precision angular contact bearing
● 20,000 rpm built-in spindle for high-precision molding (Option : 24,000 rpm)
● Nut cooling ball screw in all-axis as a standard application
● Hyundai-Wia molding package for optimal mold parts tooling
● Thermal displacement minimization with thermal distortion stabilizing system enabled (Option)
Basic FeaturesSuper Quality & ProductivityVertical Machining Center for Mold Machining
Double Column StructureHi-MOLD6500 is built upon a double column type frame. The biggest benefit of a double column machining center is the increased rigidity and less heat generated. Hence, it retains accuracy and repeatability at the highest levels.
01
Built-In SpindleBy using ultra precision class angular bearings, fast acceleration and deceleration of the main spindle is achieved.
X Type of Rib Structure BedHi-MOLD6500 was manufactured with X type and high rigid of Rib structure, and it showing the best performance in the high quality of mold machining, due to excellent vibration absorption, powerful cutting and high precise machining.
Grease Lubrication Method GuidewayBecause the lubricant which is injected to both LM guide block and ball screw nut is adopted as the grease lubrication method, we can save more than 33 times of the consumption of lubricant compared to the oil lubrication method.
Step Type of Column StructureSince X axis Cross Beam of column had been desinged with step type, it had reduced the load that occurs on the front during the product processing. In additional, the transfer stability had been increased by optimizing the column's weight.
02
04
03
01Hi-MOLD6500
05
05
04+
05
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Basic Structure
01
03
04
0505
06
02
02 ◉ Rapid Feed Rate (X/Y/Z axis)
40/40/40 m/min
◉ Feed Travel (X/Y/Z axis)
1,100/650/550 mm (43.3″/25.6″/21.7″)
◉ Table Size (LxW)
1,200×650 mm (47.2″×25.6″)
◉ Table Max. Load Capacity
1,000 kgs
Thermal Distortion Stabilizing SystemHI-MOLD6500 has adopted thermal ristortion stabilizing system for the first time. This prevents thermal deformation of the travel axes due to frequent repetition and helps maintaining constant temperature.
Nut Cooling Ball ScrewHI-MOLD6500 has also adopted ball screw nut cooling system which protects travel axes from thermal deformation.
06
05
High-Precision SpindleLong Lasting High Accuracy & Excellent PerformanceVertical Machining Center02Hi-MOLD6500
The increase in standard diameter improves stiffness and ATC interactive precision, and Z-axis displacement prevention further extends tool life.
Application of 2 Faces SpindleThe Big Plus spindle system (BCV40/BBT40) provides dual contact between the spindle face and the flange face of the tool holder. This greatly increase tool rigidity, reduces run out and adds significant productivity to yourmachining applications.
Built-In SpindleBy using ultra precision class angular bearings, fast acceleration and deceleration of the main spindle is achieved. The spindle head is designed to minimize heat displacement therefore reducing growth and making it possible to maintain high accuracies.
Before Clamping After Clamping
Clamping
Non Contact Contact
Axial Movement is Important for Face Contact
Spindle CoolingSpindle temperature can be controlled by the use of a spindle oil chiller. This ensures constant oil temperature and minimizes growth in the spindle due to thermal distortion.
Spindle Thru CoolantCoolant through the spindle is particularly useful when drilling deep holes. It helps increase the lifetime of the machine, while decreasing cycle time.20 bar [70 bar]
06+
07
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Spindle
Power(kW) Torque(N.m)
Spindle Speed (r/min)
0
22
18.5
13
53
37
24,0006,300 9,0003,350
24,000rpm (Opt.)
22kW (S2, 10min)
18.5kW (Cont.)
53N.m (S2, 10min)
37N.m (Cont.)
Low Winding High Winding
Power(kW) Torque(N.m)
Spindle Speed (r/min)
0
22
18.5
13
53
37
20,0006,300 9,0003,350
20,000rpm
22kW (S2, 10min)
18.5kW (Cont.)
53N.m (S2, 10min)
37N.m (Cont.)
Low Winding High Winding
Table & MagazineHigh Productivity Achieved with High Rigidity, Accuracy Machining
Table & Machining AreaCompared to competitive machines, the Hi-Mold series has a large work envelop making setup and use easy and convenient for the operator.
◉ Table Size (X/Y axis) : 1,200/650 mm (47.2″/25.6″)
◉ Table Load Capacity : 1,000 kgs
03Hi-MOLD6500
08+
09
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Peripheral Device
◉ Number of Tools : 30 EA
◉ Tool Shank : BCV40/BBT40 ◉ Max. Length of Tools : 300 mm (11.8″)
◉ Max. Weight of Tools : 8 kgs
◉ Max. Diameter of Tools : (W.T/W.O)
Ø90/Ø150 (Ø3.5″/Ø5.9″)
MagazineThe tool magazine holds 30 tools as standard.
Tools are stored away from the cutting area to ensure they stay clean at all times.
ATCThe Double Arm ATC provides fast and reliable tool changes to help reduce machining cycle times.
◉ Tool Change Time
Tool to Tool : 2 Sec Chip to Chip : 5 Sec
Intelligent Machining
Machine Monitoring
High Precision
High Productivity Energy Savin
g
HW-TM | HW-MCS | HW-A
FC
HW-TOM | HW-WCM
HW-ESS
User Friendly
HW-MMSHW-TDC | HW
-WARM
UP
HYUNDAI WIA Smart System for Vertical Machining Center
User Convenience
HW-eDNC
HW-MCG
Faster processing programming and enhanced processing accuracy are possible through HYUNDAI WIA Smart System. It also maximizes productivity through equipment monitoring and environment-friendly software.
HW-eDNCHYUNDAI WIA ethernet Direct Numerical Control
This software transmits and receives the CNC of processing equipment, the processing program and the NC data on a PC through the internet or serial communications, while managing the processing program of the CNC memory.
HW-MMSHYUNDAI WIAMachine Monitoring System
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple pieces of equipment and the progress of processing on a real time basis.
Smart SystemSoftware for Smart Operating and Machining04Hi-MOLD6500
HW-TDCHYUNDAI WIA Thermal Displacement Compensation
Software that measures the changes in the external environment as well as heat emission during processing to help in reducing thermal displacement.
HW-ESSHYUNDAI WIAEnergy Saving System
This is an environment-friendly power reduction software reducing the standby power unnecessarily wasted in the equipment waiting for a processing operation.
HW-TMHYUNDAI WIATool Monitoring
This is an equipment-monitoring software which checks the overload, attrition and possible damage of equipment by analyzing the spindles and the output load of the feed shaft generated during a processing operation.
HW-MCGHYUNDAI WIAMachine Guidance
NC-installed software featuring operation, maintenance, management monitoring and many more user-friendly systems.
HW-WARMUPHYUNDAI WIAWARMing Up
Warm-up software that measures main spindle halt and system warm-up time.
HW-TOMHYUNDAI WIATool Offset Measurement
User-friendly GUI software indicating tool length, diameter, and damage
HW-WCMHYUNDAI WIA Work Coordinate Measurement
User-friendly GUI software that features material coordinate system measuring
HW-AFCHYUNDAI WIAAdaptive Feed Control
Software that controls the feed automatically to maintain certain processing overload to extend tool life as well as productivity.
HW-MCSHYUNDAI WIAMachining Condition Selection
The software that sets cutting and feeding parameters according to different processing (speed, degree, quality)
HYUNDAI WIA Smart System
10+
11
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Mold PackagePowerful Mold Package, HYUNDAI-WIA Mold All in One
HWM ALL-IN-ONETo aid in the machining of molds, the Hyundai WIA Mold package is applied as a standard feature for Hi-MOLD6500 machines.
This ensures accurate and high quality sur-face finishes and contouring.
Mold Package Option
3 Package 4 Package (FANUC) (FANUC)
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
HWM ALL IN ONE
AICCⅡ Package
S/W : HW-MCS, HW-AFC
Auto Power Off
Sp. Heat Distortion Compensation Device (8 Channels)
Cutting Air Blow
Auto Tool Measuring Device
Roller Type LM Guideway
Data Server 1GB
600 block
1,000 block
3 Package : Standard 4 Package : Option
05Hi-MOLD6500
Heat Distortion Compensation DeviceSpindle growth and distortion is minimized by the use of HYUNDAI WIA’s unique cooling techniques. This provides more accuracy when utilizing High Speed Machining.
◉ High Speed Contouring Control (AICCⅡ : 600 Block)
Recognizes NC Data prior to the current processing phase
◉ Optimal S/W (FANUC 31i-B Model) HW-MCS (Selectable Process Conditions) HW-AFC (Adapive Feed Control)
◉ Automatic Power Cut Off Device
➎ Contact Probe Detects and sets tool length, and wear(Graphic User Interface included)
➌ Main Spindle Cooling Device (8-channel) Maintains temperature on the main spindle (heat sensor)
➍ Cutting Air Blow No need for cutting oil during mold processing
Interface
T.D.C With PT100 Sensor
T.D.C With DISP. SensorPower supply (Opt. Filter Choke)
Compensation of heat displacement (control of transmission axis)
Cooling system (Opt, control of setting temperature)
Lubrication system (Oil-Air)
Mold Package
12+
13
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Hyd. Supply UnitInstead of the standard hydraulic supply unit, an optional fixture unit can bring the pressure up to 70 bar, maximizing the clamping force on the fixture.
Hyd. Device
User ConvenienceVarious Devices for User Friendly
Mist CollectorThe mist collector catches and removes these particles to reduce the level of hazards in the air and reduce the accumulation of surface contaminates in your facility.
Environment Device
Linear ScaleLinear scales can be applied when highly accurate positioning is required.
Precision Device
Oil SkimmerAn oil skimmer can increase coolant and tool life by removing tramp oil contaminants.
Measuring Device
Touch SensorWork piece coordinate values can be set automatically using the optional spindle probe.
TLM - Laser & TouchTool lengths and diameters can be set automatically using the optional tool setter. This can also be used to monitor tool wear and detect broken tools.
Laser Type
Touch Type
06Hi-MOLD6500
HW-ecoPSYou can save 20% of energy when you choose the Hyundai-Wia Eco Saving System because Screen-Saver, Auto Power-Off, and Hydraulic servo motor auto control is available.
20% reduction
Befor
After
Standby PowerProduction Power
Production Power Standby Power
Optional
14+
15
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Std. Coolant (Nozzle)
Bed Flushing Coolant
Spindle Thru Coolant (20 bar)
Jet Coolant
Gun Coolant
Standard
Standard
Standard
Option
Option
Coolant Unit
Chip Disposal Process
•Hinge Belt Type : Highly efficient when treating a lot of chips. Capable of synthetic chip treatment in collective chips. (Long Chip)
•Scraper Type : Facilitate to treat chip shortly cut. (Short Chip)•Drum Filter Type : Have advantage in precision because chips are not introduced to coolant nozzle. (AL Chip)
As the technology advances on the machining tools, so do the leftover metal chips. Timely and effective disposal of such chips will enhance productivity as well as working environment.
Chip Conveyor Front (Left)
Chip Conveyor
Hi-MOLD6500●○○●○●●○●●●☆☆☆☆○☆○○●○
○○○●○☆○☆
○○○○☆
○☆☆☆☆☆☆☆○☆○○
●☆☆-○☆☆
Call LightCall LightCall Light & BuzzerWork LightElectric Cabinet LightDoor Inter-LockRemote MPG3 Axis MPGSpindle Load MeterSpindle Speed MeterWork CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit BreakerAVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffBack up Module for Black outMeasuring Device
Air Zero
Work Measuring DeviceTLM(Marposs/Renishaw/Bloom)Tool Broken Detective DeviceLinear ScaleCoolant Level Sensor (Only for Chip Conveyor)EnvironmentAir ConditionerDehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & Automation
Auto Door
Auto Shutter (Only for Automatic System)Sub O/P
NC Rotary TableI/F
Control of Additional Axis
External M Code 4eaAutomation Interface
I/O Extension (In & Out)
Hyd. DeviceStd. Hyd. UnitCenter Type Hyd. Supply Unit
Hyd. Unit for Fixture
1 Color : ■3 Color : ■■■3 Color : ■■■B
DigitalDigitalDigital6ea9ea
50kVA
TACOSMC
Touch (Mold Package)Touch/Laser
X/Y/Z Axis
Std.High Speed
SingleChannel1Axis2Axis
16Contact32Contact
70bar / 14ℓ2x3(6Port)2x5(10Port)45bar70bar100barCustomized
Standard & Optional
20,000rpm (22/18.5kW)24,000rpm (22/18.5kW)Spindle Cooling System ATC
ATC Extension
Tool Shank Type
U-Center
Stud Bolt Collet Change
Table & ColumnAPCTap Type TableT-Slot TableNC Rotary TableHIgh ColumnCoolant SystemStd. Coolant (Nozzle)Bed Flushing Coolant
Spindle Thru Coolant
Top Cover Shower CoolantGun CoolantSide Oil Hole CoolantAir GunCutting Air BlowTool Measuring Air Blow (Only for TLM)Air Blow for AutomationThru MQL Device (Without MQL)Coolant ChillerPower Coolant System (For Automation)Chip DisposalCoolant Tank
Chip Conveyor
Special Chip Conveyor (Drum Filter)
Chip Wagon
Safety DeviceTotal Splash GuardS/WMachine guidance (HW-MCG) : FANUCTool Monitoring (HW-TM) : FANUCDNC Software (HW-eDNC)Spindle Heat Distortion Compensation (HW-TDC)Spindle Warm up Function (HW-WARMUP)Energy Saving System (HW-ESS) : FANUCMachine Monitoring System (HW-MMS)Tool Offset Measurement (HW-TOM) : FANUCWork Coordinate Measurement (HW-WCM) : FANUCMachining Condition Selection (HW-MCS) : FANUCAdaptive Feed Control (HW-AFC) : FANUCETCTool BoxCustomized ColorCAD&CAM Software
FANUCFANUC
2430BCV40/BBT40CAT40/BT40HSK-A63D'andrea45°60°90°
300mm (11.8″)
20bar 30bar 70bar / 15ℓ 70bar / 30ℓ
350ℓHingeScraper
Standard (180ℓ)Swing (200ℓ)Swing Large (290ℓ)Large (330ℓ)Customized
Need for Munsel No.
Spindle Electric Device
● : Standard ○ : Option ☆ : Prior Consultation - Non Application
Hi-MOLD6500●○●
☆●●○☆-●○○
--●☆☆
●●●☆○☆●○○-○●●☆☆☆☆
●●○☆○○○☆☆
●
○○○●●○☆●○●●
●☆☆
The specifications as above will only serve as a reference.
SPECIFICATIONS
❖ Mold Package (HW-MCS, HW-AFC : Standard)
unit : mm(in)External Dimensions
16+
17
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
SPECIFICATIONS
985 (38.8) 3365 (132.5)
970
(38.
2)
1200
(47.
2)
890
(35)
1644
(64.
7)46
8(1
8.4)
3002
(118
.2)
182(7.2)
2753 (108.4)
478
(18.
8)
3410 (134.3)
450(17.7)
2500
(98.
4)
1192
(46.
9)
985 (38.8) 3365 (132.5)
970
(38.
2)
1200
(47.
2)
890
(35)
1644
(64.
7)46
8(1
8.4)
3002
(118
.2)
182(7.2)
2753 (108.4)
478
(18.
8)
3410 (134.3)
450(17.7)
2500
(98.
4)
1192
(46.
9)
650
(25.
6)
61 (2.4
)61 (2.4
)88 (3.5
)88 (3.5
)88 (3.5
)88 (3.5
)88 (3.5
)88 (3.5
)
600 (23.6) 600 (23.6)
1200 (47.2)
12 (0.5
)20 (0.8
)
32 (1
.3)
30(1.2)
Ø18H8(Ø0.7)
Detail T-Slot
unit : mm(in)Table Dimensions
SPECIFICATIONS
unit : mm(in)Tool Shank
18+
19
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
SPECIFICATIONS
Ø63
(Ø2.
48″)
65.4 (2.57)
6(0.24)
27(1.06)
2 (0.08)
Ø44
.45
(Ø1.
75″)
35 (1.38)
29(1.14)
Ø15
(Ø0.
59)
60°
45°
16.6 (0.65)
7/24
M16
Ø10
(Ø0.39)
10(0.39)
1 (0.04)(BBT40)
(BT40)
(BCV40)
(CAT40)
BT40/BBT40, BIG PLUS
60°
45°
CAT40/BCV40
Ø63
.5 (2
.5)
15 (0
.59)
25(0.984)
25(0.984)
16.3
83(0
.645
)
68.25 (2.687)15.8 (0.625)
19.05 (0.75)
3.2 (0.125)
1 (0.04) 7/24
32.15(1.266)
5/8″-11
Ø44
.5 (1
.75)
22.6(0.88)
16.1
(0.6
3)
Ø4
(Ø0.
15)
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5(0.45)3
(0.11)
P5
16.1
(0.6
3)
Ø4
(Ø0.
15)
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5(0.45)3
(0.11)
P5
ThroughCoolant
ThroughCoolant
Ø63
(Ø2.
48″)
65.4 (2.57)
6(0.24)
27(1.06)
2 (0.08)
Ø44
.45
(Ø1.
75″)
35 (1.38)
29(1.14)
Ø15
(Ø0.
59)
60°
45°
16.6 (0.65)
7/24
M16
Ø10
(Ø0.39)
10(0.39)
1 (0.04)(BBT40)
(BT40)
(BCV40)
(CAT40)
BT40/BBT40, BIG PLUS
60°
45°
CAT40/BCV40Ø
63.5
(2.5
)
15 (0
.59)
25(0.984)
25(0.984)
16.3
83(0
.645
)
68.25 (2.687)15.8 (0.625)
19.05 (0.75)
3.2 (0.125)
1 (0.04) 7/24
32.15(1.266)
5/8″-11
Ø44
.5 (1
.75)
22.6(0.88)
16.1
(0.6
3)
Ø4
(Ø0.
15)
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5(0.45)3
(0.11)
P5
16.1
(0.6
3)
Ø4
(Ø0.
15)
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5(0.45)3
(0.11)
P5
ThroughCoolant
ThroughCoolant
Specifications are subject to change for improvement without notice.
Table Size
Maximum Load Capacity
Table Change Time
Change Method
Table Driving Method
Spindle Taper
Spindle RPM
Spindle Power Output (Max./Cont.)
Spindle Torque (Max./Cont.)
Spindle Driving Method
Travel (X/Y/Z)
Distance from Table Surface to Sp
Distance from Column to SP. center
Rapid Feed Rate (X/Y/Z)
Cutting Feed Rate (X/Y/Z)
Slide Type
Number of Tools
Tool Shank
Max. Tool Dia. (W.T / W.O)
Max. Tool Length
Max. Tool Weight
Tool Selection Method
Tool Change Time T-T
C-C
Coolant Tank
Lubricating Tank
Hydraulic Tank
Air Consumption (0.5MPa)
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
TAblE
FEED
TANkCApACITY
SpINDlE
ATC
MACHINE
NC
pOWErSUpplY
mm(in)
kg(lb)
sec
-
-
-
r/min
kW(HP)
N.m
-
mm(in)
mm(in)
mm(in)
m/min
m/min
-
EA
-
mm(in)
mm(in)
kg(lb)
-
sec
sec
ℓ(gal)
ℓ(gal)
ℓ(gal)
ℓ/min
KVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM Hi-MOLD6500
1,200x650 (47.2″x25.6″)
1,000 (2,205)
-
-
-
#40
20,000 [24,000]
22/18.5 (30/25) [22/18.5 (30/25)]
53/37 [53/37]
BUILT-IN
1,100/650/550 (43.3″/25.6″/21.7″)
150 ~ 700 (5.9″ ~ 27.6″)
615 (24.2″)
40/40/40
24
RoLLeR GUIde
30
BCV40/BBT40
Ø90/Ø150 (Ø3.5″/Ø5.9″)
300 (11.8″)
8 (17.6)
RANdoM
2
5
450 (118.9)
3 (0.8)
30 (7.9)
500
40
over 50
220/60 (200/50)
3,365×2,955 (132.5″×116.3″)
3,030 (119.3″)
11,000 (24,251)
FANUC 31i-B
Specifications [ ] : Option
SPECIFICATIONS
FANUC 31i-BAxis control / Display unitControlled axesSimultaneous controllable axesLeast input incrementLeast command incrementInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Follow-upServo off
Backlash compensation
Position switchPitch error compensationLCD/MDIOperationAutomatic operation (memory)MDI operationDNC operationProgram restartDry run,Buffer register
Program check function
Single blockFeed functionsManual jog feedManual handle feed-rateFeed commandFeedrate overrideJog feedRapid traverse overrideOverride cancelRapid traverse bell-shaped acce/decelerationprogram input & Interpolation functionsAI Contour Control (AICC) IILabel SkipControl in/out
Interpolation function
Exact stop mode/Exact stopDwellHelical interpolationThreading/synchronous feedManual reference point returnReference point return1st, Reference point returnReference point return check2nd, Reference point returnProgram stop/endTape codeOptional block skipMax. programmable dimensionsAbsolute/incremental commandPlane selectionWork coordinate system settingAdditional work coordinate systemManual absoluteProgrammable data inputSub program callCustom macroCanned cycleOptional chamfering/corner RSkip functionAutomatic coordinate system settingCoordinate system rotationProgrammable mirror image
3 axis (X, Y, Z) 3 axis (G00 & G01 : 3 axis, G02 & G03 : 2 axis)X, Y, Z axis: 0.001 mm (0.0001″) B axis:1° [0.001°]X, Y, Z axis: 0.001 mm (0.0001″) B axis:1° [0.001°]G20 / G21Each axis / All axisAll axis
Over Travel
+/- 0~9999 pulse(rapid traverse & cutting feed)
10.4″ color LCD
Dry run, Program checkZ axis Machine Lock, Before feed stroke check
Rapid, Jog, handle, Manual reference point returnx1, x10, x100F code feedrate direct command0~200% (10% Unit)0~5,000mm/min (197ipm)F1, F25%, F50%, F100%
600Block
Positioning/Linear/Circular(G00/G01/G02/G03)G61 / G09G04, 0~9999.9999sec
G33
G28G27G30M00, M01 / M02, M30EIA / ISO (Automatic recognition)1 ea+/- 9999.9999” (+/- 8digit)G90 / G91G17, G18, G19G52~G59 (6 pairs)G54.1 P1~P48 (48 pairs)“On” fixedG1010 Step#100~#149, #500~#549G73, G74, G76, G80 ~ G89
G31
G68, G69G50.1, G51.1
Sub / Spindle functionsMiscellaneous functionMiscellaneous function lockSpindle speed commandSpindle speed overrideSpindle orientationRigid tappingTool functions / Tool compensationTool functionCutter compensation CTool length measurementTool length compensationTool offset pairsTool life managementData input / Output & Editing functionsReader/Puncher interfaceMemory card input/outputEmbeded EthernetUSB interfaceData serverPart program storage lengthRegistered programsMemory lockBack ground editingExternal workpiece number searchScreen hard copyExtended part program editing
External data input
Automatic data backupSetting, Display, DiagnosisSelf-diagnosis functionAlarm history displayHelp functionRun hour/Parts count displayActual cutting feedrate displayGraphic displaySpindle/Servo setting screenOperation monitor screenSelection of 5 optional languageLCD Screen Save
OptionSub Axis ControlWork coordinate CommandWork coordinate InterpolationCircular interpolationSingle direction positioningFAST ethernetAdditional Work coordinate systemScalingFS 15 tape formatTool offset numberPart program storage lengthAICC IIManual guide iAdditional Optional blockskipHandle Interupt3 Axis MPGProgram storage lengthProtection of data at 8 levelsAdditional custom micro changeRigid tapp returnTool management function
Figures in inch are converted from metric values.Design and specifications subject to change without notice.
M4 digit
S5 digits, binary output50% ~ 120% (10% Unit)
FSSB Rigid tapping
Max. T8 digitsG40~G42Z axis Input CG43, G44, G4964 Pair
RS232C
100 Mbps
1GB1280m (512Kbyte)1,000 ea
Copy, move, change of NC programTool compensation, Message,Machine reference point shift
Alarm & Message
Screen saver
G15, G16G12.1, G13.1G07.1G60100 Mbps300 pairs
200 pairsMax. 1000 EA1000 BlockInteractive program9 ea (Application can be limited)
1Mbyte
#100 ~ #199, #500 ~ #999
20+
21
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
CONTROLLER
GLOBAL NETWORk
22+
23
H
i-M
OLD
6500
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
HYUNDAI WIA America 265, Spring Lake Drive, Itasca, IL, 60143TEL : +1 201 489 2887 FAX : +1 201 489 2723
L.A Office11155 Knott Ave, STE B/C, Cypress, CA 90630, U.S.A TEL : +1 714 373 5480FAX : +1 714 373 5485
America Technical Center39205 Country Club Drive Suite C-9, Farmington Hills, MI 48310TEL : +1 248 324 1056FAX : +1 248 324 0989
HYUNDAI-KIA EUROPE GmbH Kaiserleipromenade 5, D-63067 Offenbach, Germany TEL : +49 69271 472 701FAX : +49 69271 472 719
Raunheim Service CenterKelsterbacher Strasse 51, 65479 Raunheim, Germany TEL : +49 6142 9256 0 FAX : +49 6142 834 100
JIANGSU HYUNDAI WIACompany No.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, ChinaTEL : +86 512 5672 6808FAX : +86 512 5671 6960
SHANDONG HYUNDAI WIACompany No.188 Shanghai Road, Rizhao City, Shandong Province, ChinaTEL : +86 633 229 9031/5910FAX : +86 633 229 9191/9199
CHINA Sales Company1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233 TEL : +86 21 6427 9885FAX : +86 21 3431 0376
CHINA Beiging OfficeRoom 908, Hyundai Motor Building, No.38 Xiaoyun Road, Chaoyang District, Beijing, China 100027 TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853
CHINA Guangzhou OfficeRoom 609, No.1 Yingbin Building 1# Yingbin Blvd (Dashi Section) Panyu District Guangzhou Ctiy, Guangdong, China 511431 TEL : +86 20 8550 6595~6, FAX : +86 20 8550 6597
CHINA Chengdu OfficeRoom 2103, Block A, Times Plaza, No.2 Zongfu Road, Jinjiang District, Chengdu, ChinaTEL : +86 28 8665 5550FAX : +86 28 8666 2985
CHINA Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, ChinaTEL : +86 27 5956 3256~7FAX : +86 27 5952 3258
CHINA Qingdao OfficeRoom 1207, ZhaoYin Building, 36 HongKong Middle Road, Qingdao 266071, PR China TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338
CHINA SHENYANG OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013 TEL : +86 24 3228 6640FAX : +86 24 3228 6642
HYUNDAI WIA INDIA48, Sur. No78-08. Kandamangalam Village, Sengadu Post, Sriperumbudur Taluk, Kancheepuram, Tamilnadu-602 105, India TEL : +91 44 3717 6333FAX : +91 44 3717 6363
Changwon Office153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 642-110)TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Office37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 437-718)TEL : +82 31 596 8209 Fax : +82 55 210 9804
HEAD OFFICE & FACTORY
OVERSEAS OFFICES
2014-12 001.001 ENG
Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9206, 9299 Fax +82 55 210 9804
www.wiamachine.co.kr
Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 593 8173