® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 1 10.12.11

Hi-lume® A-Series Driver Overview EcoSystem® or 3-wire control

Hi-lume® A-Series Driver is a high-performance LED driver that provides smooth, continuous 1% dimming for virtually any LED fixture, whether it requires con-stant current or constant voltage. It is the most versatile LED driver offered today due to its compat-ibility with a wide variety of LED arrays, multiple form factors, and numerous control options.

Features

•Continuous,flicker-freedimmingfrom100%to1%.•CompatiblewithEnergiSavrNode™ with EcoSystem®

unit, GRAFIK Eye® QScontrolunit,PowPak™ dimming module with EcoSystem®, and Quantum®

systems, allowing for integration into a planned or existing EcoSystem® lighting control solution. Please see chart at the end of this document or contact Lutron for details regarding compatible controls.

•Standard3-wireline-voltagephase-controltechnologyfor consistent dimming performance and compatibility with all Lutron®3-wirefluorescentcontrols.

•ProtectedfrommiswiresofinputpowertoEcoSystem® control inputs.

•100%performancetestedatfactory.•100%burnedinatfactory.•Aratedlifetimeof50,000hours@TC = 149 °F (65°C).•ULrecognizedforUnitedStatesandCanada.•FCCPart15compliantforcommercialapplications at120V~or277V~.

•PulseWidthModulation(PWM)orConstantCurrentReduction(CCR)dimmingmethodsavailable.SeeApplicationNote#360fordetails.

•Formoreinformationpleasegoto: www.lutron.com/HilumeLED

Hi-lume® A-Series, case type K

3.00in(76mm)Wx1.00in(25mm)Hx 4.90in(124mm)L

Hi-lume® A-Series, case type M

1.18in(30mm)Wx1.00in(25mm)Hx14.25in(362mm)L

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 2 10.12.11

Specifications

Performance

•DimmingRange:100%to1%•OperatingVoltage:120-277V~at50/60Hz•Aratedlifetimeof50,000hours@TC = 149 °F (65 °C). ContactLutronforderatinginformation.

•Patentedthermalfoldbackprotection•LEDsturnontoanydimmedlevelwithoutflashing

to full brightness.•Nonvolatilememoryrestoresalldriversettingsafter

power failure.•PowerFactor:>0.90at40W•StandbyPowerConsumption:<1.0W•TotalHarmonicDistortion(THD):<20%at40W•InrushCurrent:<2A•InrushCurrentLimitingCircuitry:eliminatescircuitbreakertripping,switcharcingandrelayfailure.

•Opencircuitprotected•Shortcircuitprotected•Turn-ontime:<1second•PWMDimmingFrequency:550Hz

Environmental

•SoundRating:ClassA.•RelativeHumidity:Maximum90%non-condensing.•Minimumoperatingambienttemperature TA=32°F(0°C).

Standards

•MeetsANSIC62.41categoryAsurgeprotectionstandardsuptoandincluding4kV.

•FCCPart15compliantforcommercialapplicationsat120V~or277V~.

•ManufacturingfacilitiesemployESDreductionpractices that comply with the requirements of ANSI/ESDS20.20.

•LutronRQualitySystemsregisteredtoISO9001.2008.

•UL8750recognized.•Class2outputavailable.•MeetsLEDDriverrequirementsforEnergyStar1.1.

Driver Wiring & Mounting

•Driverisgroundedbyamountingscrewtothegrounded fixture (or by terminal connection on the Kcase).

•Terminalblocksonthedriveracceptonesolidwireperterminalfrom18to16AWG(0.75to1.5mm().

•Fixturemustbegroundedinaccordancewithlocaland national electrical codes.

•Maximumdriver–to–LEDlightenginewirelengthis10ft(3.0m).

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 3 10.12.11

Class2ConstantVoltage

A=10.0V–12.0V

B=12.5V–20.0V

C=20.5V–24.0V

D=24.5V–38.0V

IsolatedNon-Class2 ConstantVoltage

X=38.5V–60.0V

Class2ConstantCurrent

E=0.20A–0.50A30V–54V

F=0.51A–1.00A30V–54V

G=0.20A–0.70A8V–20V

H=0.20A–0.70A15V–38V

I=0.71A–1.05A8V–20V

J=0.71A–1.05A15V–38V

K=1.06A–1.50A8V–20V

L=1.06A–1.50A15V–38V

M=1.51A–2.10A8V–20V

IsolatedNon-Class2 ConstantCurrent

Y=0.20A–0.50A30V–60V

Z=0.51A–1.00A30V–60V

How to Build a Model Number: Hi-lume® A-Series

L3DA4U1U _ _ - _ _ _ _ _

Case Style:

S = Studded (Kcaseonly)

N=Non-StuddedDriver Output:

C=Constantcurrentdriver withpulsewidthmodulation(PWM)dimming

A=Constantcurrentdriver withconstantcurrentreduction(CCR)dimming

V=Constantvoltagedriver withpulsewidthmodulation(PWM)dimming

Current Level (for Constant Current):020=0.20A;021=0.21A...210=2.10A

Voltage Level (for Constant Voltage):100=10.0V;105=10.5V...600=60.0V

Case Size:

K=Compact

M=Stick

example: L3DA4U1UKS-HC070For further assistance selecting your model number,contactourLEDCenterofExcellence at1-877-346-5338orLEDS@lutron.com

How to Build a Model Number: Hi-lume® A-Series

L3DA4U1U _ _ - _ _ _ _ _

LED Load Output Range (see the following pages for more detail):

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 6 10.12.11

“C” Output Range, Voltage Driver Models

Output Current vs. Output Voltage

0

0.5

1

1.5

2

2.5

3

3.5

0 10 20.5 30 40 50 60

Output Voltage (V)

Out

put

Cur

rent

(A)

Output Power vs. Output Voltage

0

5

10

15

20

25

30

35

40

0 10 20.5 30 40 50 60

Output Voltage (V)

Out

put

Po

wer

(W)

60

65

70

75

80

85

90

5 10 15 20 25 30 35 40

Output Power (W)

Effi

cien

cy (%

)

Driver Efficiency vs. Output Power at 120 V

60

65

70

75

80

85

90

5 10 15 20 25 30 35 40

Output Power (W)

Effi

cien

cy (%

)

Driver Efficiency vs. Output Power at 277 V

24 24

C

40 W Max.

5 W Min.

C

24 V

20.5 V

24 V

20.5 V

Voltage Driver Operation Range:

Typical Performance Specifications:

Output Current vs. Output Voltage

0

0.5

1

1.5

2

2.5

3

3.5

0 10 20.5 30 40 50 60

Output Voltage (V)

Out

put

Cur

rent

(A)

Output Power vs. Output Voltage

0

5

10

15

20

25

30

35

40

0 10 20.5 30 40 50 60

Output Voltage (V)

Out

put

Po

wer

(W)

60

65

70

75

80

85

90

5 10 15 20 25 30 35 40

Output Power (W)

Effi

cien

cy (%

)

Driver Efficiency vs. Output Power at 120 V

60

65

70

75

80

85

90

5 10 15 20 25 30 35 40

Output Power (W)

Effi

cien

cy (%

)

Driver Efficiency vs. Output Power at 277 V

24 24

C

40 W Max.

5 W Min.

C

24 V

20.5 V

24 V

20.5 V

Parameter 120 V 240 V 277 V Test Conditions

InputCurrent 370mA 190mA 170mA TA =25°C, 24.0V,40Wload, Max.LightOutput, K enclosure

Power Factor 0.99 0.97 0.96

THD 10% 10% 12%

Driver Efficiency 86% 87% 88%

Driver Type Output Dimming Method Output Voltage Output Current Output Power Standards Recognition

ConstantVoltageDriver(Class2)

PulseWidthModulation(PWM) 20.5–24.0V 1.95–0.21A 5–40W

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 20 10.12.11

K Case: Case Dimensions

K Case: Connector Location Dimensions

B

FG

J* C

H*

A

E D

I*

M N

O P

R*

K*

Q

L

K*

Q

L

A 4.20in(107mm)B 1.00in(25mm)C 3.00in(76mm)D 4.90in(124mm)E 4.60in(117mm) (mountingcenter)

F 1.42in(36mm)G 1.99in(51mm)H* 1.11in(28mm)I* 2.00in(51mm)J* 1.60in(41mm)K* 0.33in(8.3mm)

L 0.65in(16.5mm)M 0.75in(19mm)N 1.73in(44mm)O 1.33in(34mm)P 0.74in(19mm)Q 0.32in(8mm)

R* 0.29in(7mm)

* Applies to studded K case only.

8-32 Threaded

Studs*

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 21 10.12.11

D

C

B A

M Case: Case Dimensions

A 14.125in(359mm)B 13.68in(347mm) (mountingcenter)C 1.18in(30mm)D 1.00in(25mm)

K Case: Side Entry Connector Location Dimensions (Non-Studded)

S

UV

TS 1.38in(35mm)T 0.64in(16mm)U 0.88in(22mm)V 1.53in(39mm)

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 22 10.12.11

Wiring Diagram for 3-Wire ControlDimmed Hot (Orange)

Switched Hot (Black)

Neutral (White)

Ground1 (Green)

Dimmed Hot (Black)

Neutral (White)

Ground1 (Green)

Switched Hot (Black)

Neutral (White)

Ground1 (Green)

Ground2

+V3 (Red)

-V3 (Black)

+V3 (Red)

-V3 (Black)

+V3 (Red)

-V3 (Black)

LED light engine

Ground2

E1 (Purple)

E2 (Purple)

LED light engine

Ground2

ToForward Phase

DimmingControl

ToEcoSystem®

Digital Link

ToLine

Voltage

To3-wire

DimmingControl

LED light engine

Hi-lume®

A-Series

Hi-lume®

A-Series

Hi-lume®

A-Series

Dimmed Hot (Orange)

Switched Hot (Black)

Neutral (White)

Ground1 (Green)

Dimmed Hot (Black)

Neutral (White)

Ground1 (Green)

Switched Hot (Black)

Neutral (White)

Ground1 (Green)

Ground2

+V3 (Red)

-V3 (Black)

+V3 (Red)

-V3 (Black)

+V3 (Red)

-V3 (Black)

LED light engine

Ground2

E1 (Purple)

E2 (Purple)

LED light engine

Ground2

ToForward Phase

DimmingControl

ToEcoSystem®

Digital Link

ToLine

Voltage

To3-wire

DimmingControl

LED light engine

Hi-lume®

A-Series

Hi-lume®

A-Series

Hi-lume®

A-Series

Wiring Diagram for EcoSystem® Digital Control

1 Ground wire connection available on K case models only. 2 Fixture and driver case must be grounded in accordance with local and national electrical codes. 3 Maximumdriver–to–LEDlightenginewirelengthis10ft(3.0m).

Note:Colorsshowncorrespondtoterminalblocksondriver.

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 23 10.12.11

Compatible Controls

•Guaranteedperformancespecificationswiththecontrolslistedinthechartbelow.•Forassistanceselectingcontrols,contactourLEDCenterofExcellenceat1-877-346-5338orLEDS@lutron.com

1 FixturesperControlvalueassumesa40Wfixture.Numberoffixturesmaybehigherifwattageislessthan40Wandmaybelowerifganged. See control specification submittal sheet for details.

2 Forusewith3-wirecontrolsorCommercialSystems,RadioRA® Systems or Home Systems applications. NOTE: ContactLutronTechnicalSupportforderatingruleswhenusingwallboxcontrolsontheHi-lume® A-Series LED Driver in

multi-gang applications. For the list of compatible controls, visit lutron.com/HiLumeLEDandselect“EcoSystem/3-wireControlReportCard.”

Product Part Number Fixtures per Control1 Measured Light Output Range

120 V 277 V 120 V 277 V

NovaT*® NTF-10- NTF-10-277- 1–41 1–44 100%–1%

NTF-103P- NTF-103P-277- 1–20 1–33 100%–1%

Nova® NF-10- NF-10-277- 1–41 1–44 100%–1%

NF-103P- NF-103P-277- 1–20 1–33 100%–1%

Vareo® VF-10- 1–20 – 100%–1%

Skylark® SF-10P- SF-12P-277- 1–20 1–33 100%–1%

SF-103P- SF-12P-277-3 1–20 1–33 100%–1%

Diva® DVF-103P- DVF-103P-277- 1–20 1–33 100%–1%

DVSCF-103P- DVSCF-103P-277- 1–20 1–33 100%–1%

Ariadni® AYF-103P- AYF-103P-277- 1–20 1–44 100%–1%

Vierti® VTF-6A- 1–15 1–33 100%–1%

Maestro® MAF-6AM- MAF-6AM-277- 1–15 1–33 100%–1%

MSCF-6AM- MSCF-6AM-277- 1–15 1–33 100%–1%

MaestroWireless® MRF2-F6AN-DV- 1–15 1–33 100%–1%

RadioTouch® RTA-RX-F- 1–41 1–88 100%–1%

Spacer System® SPSF-6A- SPSF-6A-277- 1–15 1–33 100%–1%

SPSF-6AM- SPSF-6AM-277- 1–15 1–33 100%–1%

Lyneo® Lx LXF-103PL- LXF-103PL-277- 1–20 1–33 100%–1%

RadioRA® 2 RRD-F6AN-DV- 1–15 1–33 100%–1%

HomeWorks® QS HQRD-F6AN-DV 1–15 1–33 100%–1%

Interfaces2 PHPM-3F-120 1–41 – 100%–1%

PHPM-3F-DV 1–41 1–88 100%–1%

GRX-FDBI-16A 1–41 1–88 100%–1%

PowPak™dimmingModulewithEcoSystem

RMJ-ECO32-DV-B 32perEcoSystemlink 100%–1%

EnergiSavrNode™ with EcoSystem®

QSN-1ECO-S,QSN-2ECO-S 64perEcoSystemlink 100%–1%

GRAFIK Eye® QS with EcoSystem®

QSGRJ-_E, QSGR-_E

64perEcoSystemlink 100%–1%

Quantum® Various 64perEcoSystemlink 100%–1%

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 24 10.12.11

EcoSystem® Wiring Diagrams

EcoSystem® Digital Link Overview

•TheEcoSystem®DigitalLinkwiring(E1andE2)connects the digital ballasts and drivers together to form a lighting control system.

•EachEcoSystem®DigitalLinksupportsupto64digitalballasts, LED drivers or EcoSystem®Modules(e.g.C5-BMJ-16A,C5-XPJ-16A),32occupancysensors(64occupancysensorswithEnergiSavrNode™ with EcoSystem®),16daylightsensors,and64wallstationsor IR receivers.*

•SensorsdonotdirectlyconnecttoHi-Lume® A-Series LED drivers.

•E1andE2(EcoSystem®digitallinkwires)arepolarityinsensitive and can be wired in any topology.

•AnEnergiSavrNode™ with EcoSystem® unit, GRAFIK Eye® QS control unit with EcoSystem®,PowPak™ dimming module with EcoSystem®, or Quantum® system provides power for the EcoSystem®DigitalLinkand supports system programming.*

•AllEcoSystem®DigitalLinkprogrammingiscompletedby using the Energi Savr App for Apple iPad, iPod Touch or iPhone mobile digital devices, GRAFIK Eye® QS with EcoSystem®,PowPak™ dimming module with EcoSystem®, or Quantum® System.

EcoSystem® Digital Link Wiring

•DriverEcoSystem®DigitalLinkterminalsonlyacceptone18to16AWG(0.75to1.5mm()solidcopperwireper terminal.

•MakesurethatthesupplybreakertotheDigitalDriverand EcoSystem®DigitalLinkSupplyisOFFwhenwiring.

•ConnectthetwoconductorstothetwoDigitalDriverterminals E1 and E2 as shown.

•UsingtwodifferentcolorsforE1andE2willreduceconfusion when wiring several drivers together.

•TheEcoSystem®DigitalLinkmaybewiredClass1orIEC/PELVNEC®Class2.Consultapplicableelectricalcodes for proper wiring practices.

TotheEcoSystem® Digital Bus and additional drivers and/or ballasts

Notes

•TheEcoSystemRDigitalLinkSupplydoesnothavetobelocatedattheendoftheDigitalLink.

•EcoSystemRDigitalLinklengthislimitedbythewiregaugeusedforE1andE2asfollows:

Wire Gauge Digital Link Length (max)

12AWG 2200ft

14AWG 1400ft

16AWG 900ft

18AWG 550ft

Wire Size Digital Link Length (max)

4.0mm( 828 m

2.5mm( 517m

1.5mm( 310m

1.0mm( 207m

0.75mm( 155m

E1E2

DigitalB

usLINE

GNDNEU

SHDH

E1E2

DigitalB

us

Driver Terminals

Driver Terminals

LINE

GNDNEU

SHDH

*PowPak™ dimming module with EcoSystem® provides power for the EcoSystem®DigitalLinkandcansupport32digitalballasts,LEDdrivers or EcoSystem®Modules,6WirelessOccupancySensors,1WirelessDaylightSensor,and9PicoWirelessControllers.

Apple,iPad,iPodTouch,andiPhonearetrademarksofAppleInc.,registeredintheU.S.andothercountries.

® Specif icat ion Submittal page

Job Name:

Job Number:

Model Numbers:

LED Dimming Driver Hi-lume® A-Series L3D Architectural Dimming

369-325 Rev. D 25 10.12.11

ELECTRICIANS AND CONTRACTORS

Driver Leads

Maximumdriver–to–LEDlightenginewirelengthis10ft(3.0m).

Wiring and Grounding

Driver and lighting fixture must be grounded. Drivers must be installed per national and local electrical codes.

LED Load Replacement

ForClass2rateddrivers,theLEDloadcanbechanged while the driver is installed and powered.

Maximum Driver Operating Temperature

Drivercasetemperature(TC)mustnotexceedULconditions of acceptability in end product.

For50,000hourlifetime,drivercasetemperature(TC)mustnotexceed149°F(65°C).

FACILITIES MANAGERS

SERVICE

Warranty

For warranty information, please visit http://www.lutron.com/TechnicalDocumentLibrary/Ballast%20and%20Driver%20Warranty.pdf

Replacement Parts

WhenorderingLutron® replacement parts please providethefullmodelnumber.ConsultLutronifyouhave any questions.

Further Information

For further information, please visit us at www.lutron.com/hilumeLED or contact our LEDControlCenterofExcellenceat1.877.346.5338orLEDs@lutron.com