Upload File

helicopter - 3doodler · helicopter by louis step 1 step 2 step 5 step 6 step 3 step 4 cut a doodle...

  • Home
  • Documents
  • Helicopter - 3Doodler · Helicopter By Louis Step 1 Step 2 Step 5 Step 6 Step 3 Step 4 Cut a doodle strand the same length as the landing gear, then cut a small piece off the end
5
Helicopter By Louis the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014 Final This tutorial will show you how to make a helicopter with spinning rotors, using a stencil and 4-5 doodle strands.

Upload: others

Post on 23-Jul-2020

0 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: Helicopter - 3Doodler · Helicopter By Louis Step 1 Step 2 Step 5 Step 6 Step 3 Step 4 Cut a doodle strand the same length as the landing gear, then cut a small piece off the end

HelicopterBy Louis

the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014

Final

This tutorial will show you how to make a helicopter with spinning rotors, using a stencil and4-5 doodle strands.

Page 2: Helicopter - 3Doodler · Helicopter By Louis Step 1 Step 2 Step 5 Step 6 Step 3 Step 4 Cut a doodle strand the same length as the landing gear, then cut a small piece off the end

the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014

HelicopterBy Louis

the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014

Step 1 Step 2

Step 5 Step 6

Step 3 Step 4Cut a doodle strand the same length as the landing gear, then cut a small piece off the end of that.

Trace all the pieces of the stencil. Make sure not to cover the pieces with holes.

Peel up the sides and attach them to the longrectangle piece. Make sure the hole is at the back.

Attach the larger rectangle with no hole to the back.It should line up with the sides and bottom.

Attach the small rectangle to the front of the helicopter.

Using the cut strand, line up the bottom hole with the small rectangle with the hole in it. Secure it in place.

Page 3: Helicopter - 3Doodler · Helicopter By Louis Step 1 Step 2 Step 5 Step 6 Step 3 Step 4 Cut a doodle strand the same length as the landing gear, then cut a small piece off the end

the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014

HelicopterBy Louis

the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014

Step 7 Step 8

Step 11 Step 12

Step 9 Step 10Attach the landing gear at a slightly outward angle for better stability.

Attach the tail to the center of the back.

Attach the propeller blades to the circular piece Let a ball of hot plastic build up in the center of thecircle and press the longer doodle strand into it.

Make sure that it is straight up and down and not at an angle at all. Reinforce it.

Doodle a ring around the strand about 1/2 cm fromthe propellers. Hold the pen in place while twisting.

Page 4: Helicopter - 3Doodler · Helicopter By Louis Step 1 Step 2 Step 5 Step 6 Step 3 Step 4 Cut a doodle strand the same length as the landing gear, then cut a small piece off the end

the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014

HelicopterBy Louis

the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014

Step 13 Step 14

Done!

Step 15 Step 16Build up a ball of plastic and press the smaller doodle strand into it.

Insert the strand into the helicopter and cap the end with some plastic. GIve it a spin!

Reinforce it. Add the smaller propeller and cap it.

Ready to take to the skies! Or add more details! Clearly Clear windows? A searchlight? Or even better, a pilot!

Page 5: Helicopter - 3Doodler · Helicopter By Louis Step 1 Step 2 Step 5 Step 6 Step 3 Step 4 Cut a doodle strand the same length as the landing gear, then cut a small piece off the end

the3Doodler.com/Community | Copyright WobbleWorks, Inc. 2014

HelicopterBy Louis

Stencil


Accu-Cut XL & Accu-Cut Expansion Pack · Step 1: Remove the set screws and aluminum connector bars from your Accu-Cut™ (KMA2700) tracks. Discard the screws and bars. (Replacement

Helicopter Site Keepers - British Helicopter Association

Home | Sky Lakes Medical Center · Reusable Face Mask — Sky Lakes Medical Center Step 1: Cut two main cotton fabric pieces and cut two flannel lining pieces from pattern Step 2:

Helicopter Game Tutorial A Step By Step Guide. Step 1- Open Scratch Go to: – START – ALL PROGRAMS – COMPUTING AND BUSINESS – SCRATCH

Helicopter Association International IS-BAO Helicopter...Helicopter Association International (HAI) British Helicopter Association (BHA) and the International Business Aviation Council

The WANZ Guide to Window Installation · Step P1 – Preliminary Check 8 Step P2 – Cut the Underlay 9 Step P3 – Flexible Flashing Tape 10 . Cavity Construction. Page 11 Step C1

PRESENTS - Paper Toys · 1D 1E Note Step by step instructions 1. Print all pages, recommended paper 50 lb. 2. Cut out on page 1. This part is flat. 3. Cut out Base …

A11.1 Dynamic Cut-Off-Line geometry as the next step in

Planner page - vaessen-creative.com€¦ · using ink, stamps, collectables, scrapbook paper, and a lovely photo for a personal touch. Have fun! step 4 step 1 step 6 step 3 Cut out

Build a Wind Tube Flyer - WordPress.com...Build a Wind Tube Flyer Idea #1—the Ring Idea #2—Helicopter Idea #3—a flying cup STEP 1 Step 3 4 STEP 1 COPTER STEP 2 PAPER COPTER STEP

Modified step-cut osteotomy for post-traumatic …Modified step-cut osteotomy for post-traumatic cubitus varus 743 Figure 1 Preoperative clinical and radiological pictures of a patient

HI! I’m Elanko. · 2020. 4. 24. · STEP 1: Color Elanko. Use your imagination. STEP 2: Cut Elanko out. STEP 3: Draw a nice background. STEP 4: Pin Elanko on the background. STEP

STEP Conference 2015 - Stuart Hay, Living Streets - Walking: Can Simple Steps Cut Emissions?

STEP 1: Insert the Flexi 10 Disc into your computer. STEP ... · software package. STEP 9: Enter the ... STEP 12: Open FlexiSTARTER 10 and press the Cut/Plot button. (Type some text

Happy Valentine’s Day - Nintendo...Happy Valentine’s Day Instructions: STEP 1 STEP 4 STEP 2 STEP 5 Cut the Front and Back STEP 3 sections along the dotted lines. Fold the tabs

Lock Replacement. Step 1: Cut insulation behind lock mechanism

Wednesday 15 November 2017 - Bonhams...A DIAMOND RING AND A HALF ETERNITY RING 1st: The step-cut diamond between graduated baguette-cut diamonds, 2nd: The front set with brilliant-cut

Wayne - bcair.com · This booklet contains complete step by step instructions for building the B. C. Air Originals Helicopter. Before you start building your first Helo it is suggested

assets.contentstack.io · STEP 1 / Cut a rectangle shape around the design printed on your HP brochure paper 180g STEP 4 / Cut around the visible design STEP 3 / Do this for every

Instructions Step 1 Cut along the dotted lines. Fold along ... · Designed by Instructions Step 1 Cut along the dotted lines. Step 2 Fold along the solid lines. Step 3 Glue inside

FINGER PUPPET - shutterfly.comFINGER PUPPET Instructions: Step 1: Print on cardstock or stencil onto cardboard paper. Step 2: Cut along dotted lines. Step 3: Step 4: Glue the black

4-Step Sequencing Activities - Chicago Public Schools SPEECH...4-Step Sequencing Activities This pack includes 6 four-step sequencing pictures. Both colored and black & white (cut

STEP 1: Print and cut out the graphic above, STEP 2: Cut a slit in … · 2018-04-30 · Directions: STEP 1: Print and cut out the graphic above, ensuring that the 3! inch measurement

PowerPoint Presentation€¦ · New Year's Ball Drop Craft Directions Step l: Cut out the images. Fold and cut a slits in the countdown ball. Step 2: Secure the countdown strip to

Helicopter Aircrew Training Solutions - CAE Inc....Helicopter Aircrew Training Solutions 3 Helicopter Aircrew Training Partner of Choice Helicopter pilots today are operating highly

STEP 1: Print and cut out the graphic above, STEP 2: Cut a ... · STEP 1: Print and cut out the graphic above, ensuring that the 3! inch measurement section is correct using a ruler

Cut glider fins from balsa fin sheet, pin together, and sand as shown in step 3. Cut ELEVON from wing. Cut launch lug dowel in half. Cut piece from fin sheet for glider launch lug

CHAPTER 6**** Short cut approach alternative to the step

PROJECT PLAN…1-1/2" Long Proet Plans: Centeriece 4 Assembly Instructions Step 1 Cut out all material using the Lumber & Sheet Cut Layout Guide. Step 2 Take one of the 15-3/16”

CUT & SEW BEANIES · 2020. 1. 15. · With our cut & sew Beanie program you can build a completely custom beanie and label it with your branding. Go step by step and spec out your

Step 1: Cut window to see Adam and Eve. Cut out the Adam/Eve picture

Garden Markers - Lowe's · Garden Markers Step-By-Step Instructions Other Supplies • Scrap Copper Pipe Cut pipe to desired size. Here, we cut our markers to about 4 inches. Draw

Leaf Foldable Instructions. Step 1 Cut out two leaves Cut out four arrows

Glider - Michaels Stores...step 1: Trace glider template onto chipboard. step 2: Paint the glider as desired, using the photo as a guide. step 3: Cut out the pieces, then cut the slit

6-8 Premium worksheet 2k18 · 2018. 10. 31. · 6 Front Back F B 6 5 Front Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Cut Folding Instructions Night & Day Ever wondered