EZ-View® Product Line

New EZ-View®

• Port Sizes: 1/2”, 3/4”, 1”, 1.5” , 2”• Measure: Oil and Water• Accuracy: ±5% of full scale• Repeatability: ±1%• Adjustable limit indicators• Operates in any position• Other specifications:

– Operating temperature: 32 to 250 °F (0 to 121 °C)– Maximum pressure (liquids): 325 psi (22.4 bar)– Fittings: Polysulfone, C360 Brass, PVC or T303 SS– Port types: NPT, BSP, sweat, socket weld, swivel– Optional: Teflon-coated springs and retaining rings available for most models

Fitting options

Traditional (non spring) vs. EZ-View®(spring)

Comparison • Traditional

– Lower Pressure Rating – Low Pressure Drop– Lower Flows– Vertical Mounting– Limited Viscosity Range– Sensitive to Shock

• Hedland– Higher Pressure Rating– Higher Pressure Drop– Flows > 0.5 GPM– Install in Any Position

• no special piping or flow straighteners needed

– Viscosity Range to 400 sus– Insensitive to Shock &

Vibration

EZ-View® in Action• As the fluid or gas enters

the meter, it is directed around the metering cone

• The pressure differential created by the flow around the cone causes the piston to move against the spring

Flow-Alert® Flow Switches• Reed

– N.O., N.C., SPDT (Form C) versions available– Fully encapsulated– Changes state when internal magnet is in proximity -

returns to original condition when magnet moves away

• Latching– 10-30 VDC or 115 VAC versions– N.O. contact, closes when internal magnet reaches

set point– Remains closed until magnet moves back across set

point, or if power is cycled– Indicator light when contact is closed

EZ-View®-In-line Test Kit• Includes pressure gauge and load valve• Port Size: 1” NPT (male/female)• Measure: Oil, Water• Accuracy: ±5% of full scale, Repeatability: ±1%• Adjustable limit indicators• Operates in any position• Other specifications:

– Flow range: 0.5 to 28 GPM (3 to 100 LPM)– Operating temperature: 32 to 150 °F (0 to 62 °C)– Maximum pressure: 160 psi (11 bar)– Wetted materials: Polysulfone, SS, PVC, Teflon, polypropylene,

BUNA-N, EDPM– Optional: Teflon-coated springs and retaining rings

EZ-View®-Applications

• Telecom• Coolant Flow on Calorimeters

• Automotive• Case Drain – Hydraulic Power Units• Engine Coolant Test Systems• Transmission Flush Systems

EZ-View®-Applications• Semicon

• Coolant Flows• Flush Flows

• Fluid Power• Case Drain – Hydraulic Power Units

Thank You

+44 (0)1280 817304 sales@bellflowsystems.com www.badgermeter.co.uk

Bell Flow Systems are the UK representative for Badger Meter