header parts coguatal e - harvestaire · augers feeder house parts rotor parts engine parts ......

harvestaire.com.auSince 1980

PHONE: 08 9344 7433 FAX: 08 9345 3256EMAIL: [email protected]

HEADER PARTSCATAloguE

2017 Harvest

Harvestaire is a Western Australian owned operation marketing products across Australia.

harvestaire.com.auPHONE: 08 9344 7433 - FAX: 08 9345 3256

EMAIL: [email protected] After Hours: Dean Brooks - Mobile: 0428 246 422

harvestaire.com.au 3

Contents

Actuators - Electric Linear ........................................................................................................................................................................................................ 61Air Reel Parts ............................................................................................................................................................................................................................................... 8Auger Extensions ............................................................................................................................................................................................................................... 13Bats - Header Reel Bats ................................................................................................................................................................................................................ 58Belting - Draper Front & Pickup Belts & Rollers ....................................................................................................................................... 18-21Belts - V Belt - Heavy Duty ............................................................................................................................................................................................... 63-69Brackets GPS & 2 Way & Touch Screens .................................................................................................................................................................... 62Canola Vertical Knife ...................................................................................................................................................................................................................... 54Canola - Sieves ...................................................................................................................................................................................................................................... 35Chain - Roller .......................................................................................................................................................................................................................................... 60Concaves - Helical ............................................................................................................................................................................................................................. 22Concaves - Conventional & Axial Flow .............................................................................................................................................................. 23-25Crop-lifters ................................................................................................................................................................................................................................................. 59Drum Bars .......................................................................................................................................................................................................................................... 26-28Feeder Chains & Sprockets ............................................................................................................................................................................................. 37-40Gorden Rotor Bars ............................................................................................................................................................................................................................ 28Grain Elevator Chains & Sprockets......................................................................................................................................................................... 41-43Grain Tank Extensions - Big Top ............................................................................................................................................................................................. 9Hay Tynes .................................................................................................................................................................................................................................................... 61Height Gauge - Lokken ............................................................................................................................................................................................................... 60Hydraulic Multi Coupler ............................................................................................................................................................................................................. 53Idler Pulleys .............................................................................................................................................................................................................................................. 52Knife Drive Box - (SCH) ...................................................................................................................................................................................................... 54-55Knife Guard Lifter Kits .................................................................................................................................................................................................................... 16Knife Guards ......................................................................................................................................................................................................................................14-15Knife Sections & Knifeheads & Hardware ....................................................................................................................................................... 48-51Knives ................................................................................................................................................................................................................................................... 44-47Lentil Lifter ................................................................................................................................................................................................................................................. 57Lupin & Canola Breakers ................................................................................................................................................................................................................ 9Moisture Test Weight & Temperature Meters - Grain Hay Cotton Coffee ..................................................................... 10-11Plastic Extension Finger .............................................................................................................................................................................................................. 17Posifeed Rollers..................................................................................................................................................................................................................................... 36PTO Shafts & Yokes .......................................................................................................................................................................................................................... 59Retractable Fingers ................................................................................................................................................................................................................. 56-58Rotor Bars ........................................................................................................................................................................................................................................... 26-28Rotor Blade Kits (Elephant Ears) ........................................................................................................................................................................................ 29Rubber Seals & Curtains & Auger Spouts ................................................................................................................................................................ 70Sieves - Gorden Air Jet ................................................................................................................................................................................................................. 34Sieves - Top & Bottom Pre Cleaners ...................................................................................................................................................................... 30-33Tyne Reels & Parts (Hart Carter & Universal & Macdon) ........................................................................................................................ 4-8Unload Auger Clutch System .................................................................................................................................................................................................12Wear Bars .................................................................................................................................................................................................................................................... 29

Replacement PartsAugers Feeder House Parts Rotor Parts Engine PartsHydraulic Parts Steering Parts General Parts Wind Fan Parts Transmission and Final Drive Parts Case-IH .......................................................................................................................................................................................................................................................................................... 71-80John Deere .............................................................................................................................................................................................................................................................................. 81-89New Holland ......................................................................................................................................................................................................................................................................... 90-93Massey Ferguson/Agco/Allis ................................................................................................................................................................................................................................ 94 Macdon Draper Platforms .......................................................................................................................................................................................................................................... 94

Harvestaire is Proudly

Australian Owned and Operated

4 Prices exclude GST 08 9344 7433

Tyne Reels for all makes

We are an Australian distributor for Hart Carter

and carry a large stock of Reels and Parts.

Hart Carter Reels are original equipment on John Deere,

Case-IH, New Holland, Honey Bee, Agco and

Massey Ferguson.

Agco/AllisHATR581 Reel 30ft Agco/Allis all 30ft Fronts except Draper 6 Bar Reel $7500

Case-IHHATR561 Reel 25ft Case-IH 1010 25ft 6 Bar Reel $7000

HATR581 Reel 30ft Case-IH 1010 1020 30ft 6 Bar Reel $7750



Honeybee (or New Holland belt front)HATR582 Reel 30ft Honeybee 30ft 6 Bar Reel $7500

HATR034 Reels – 36ft (HATR034 + HATR534) Honeybee 36ft – Split Reels 6 Bar Reel $8800



John DeereHATR562 Reel 25ft John Deere 925 25ft 6 Bar Reel $7000

HATR580 Reel 30ft John Deere 230 and 930 30ft 6 Bar Reel $7600

HATR056 Reel 24ft John Deere 224 & 924 24ft 6 Bar Reel $7000

HATR582 Reel 30ft – 8” Centre Barrel JD630 Rigid 30ft 6 Bar Reel $7300

HATR035 Reel 30ft – 10” Centre Barrel JD630 Draper 30ft 6 Bar Reel $8750

HATR023 Reel 35ft One Piece – 10” Centre Barrel JD935D Draper 35ft 6 Bar Reel $9250

HATR076 Reel 36ft One Piece – 10” Centre Barrel JD936D Draper 36ft 6 Bar Reel $11250

Macdon (or Case-IH belt front)HATR581 Reel 30ft Macdon 30ft Swather or Harvester 6 Bar Reel $7750

Midwest Reels and parts are available for MidWest Platforms fitted with Hart Carter Reels (All models prior to 2010)

New HollandHATR580 Reel 30ft New Holland 971 973 Front 30ft 6 Bar Reel $7600

Reels include Reel Arm Brackets but not For/Aft Hydraulic Cylinders,Hoses or Hydraulic Motor Drives, Chains or Sprockets.

Order No. Description Model Application Price

08 9344 7433 Prices exclude GST 5

Reel Tynes

112mm41/2”

RT-409 RT-630RT-804

Level 1 1998 and prior

RT-525RT-423 HC-480056RT-139 RT-987RT-434RT-183RT-551 RT-013

152mm6”

RT-551 John Deere, New Holland, Honeybee, Agco/Allis & Case-IH. suits almost all Reels sold on these machines 1990-1998 $4.50 with Pipe Bats (Hart Carter Reels) 41/2”, 112mm spacing

RT-804 John Deere Rigid and Draper, New Holland, Honeybee, Agco/Allis & Case-IH. Original Hart Carter - USA $5.50 RT-804A Latest model Hart Carter Reels 6”, 152mm spacing Level 2 – Reels 1999 onwards Australian Production $4.50

RT-423 John Deere 630D 635D 640D 630FD 635FD 640FD 645FD Draper Fronts $11.40 ea with latest reel arm bearings Original Part: KXE10423

RT-013 Auxillary Tyne. Fitted to left and right ends of Hart Carter Reels $12

RT-525 John Deere, New Holland, Honeybee, Agco/Allis & Case-IH. Suits almost all reels sold Extra Strength $7 on these machines 1990-1998 with Pipe Bats (Hart Carter Reels) 4½”, 112mm spacing Version with Steel Strap

RT-183 Case-International 810 or 1010 or other makes & models with wooden bats – replaces steel spring tynes $4 (Comes with bolts and nuts for attachment)

RT-409 Case-IH with LOVE Reel, Horwood Bagshaw with LOVE Reel $7

RT-630 Honeybee and Agco fitted with Universal Harvester (U2) Reel $4

UHC-211 Wire Tyne 8” – Honeybee fitted with Universal Harvester (U2) Reel $4.50

RT-767 Early Agco/Allis R50 R60 R70 C-IH 1020, some JD900 Series, NH971 – early $5

RT-985 Macdon MC27985. Used on Macdon Reels prior 2001, Case-IH Belt Fronts prior 2001 – 960/1040 962 1042 $3.30

RT-139 Macdon CXM105212. Used on Macdon Reels 2001 onwards 973 1052 2052 excluding D60 model $6

HC480056 Case-IH 1010 reels with wooden bats – Steel Tyne $4

HC480057 Tyne Clip suits HC480056 Steel Tyne on wooden bat $0.60

RT-434 Macdon 164434, Case-IH 84130300 suits 42mm Diameter Pipe on Case-IH 2152 2162 D60 and New Holland 83C Draper Fronts $8

RT-987 Macdon 137987, Case-IH 87561020 suits 42mm Diameter Pipe on Case-IH 2152 2162 D60 and New Holland 83C Draper Fronts $10 Heavy Duty Version – on Case-IH and New Holland Draper Fronts

HPNH 1149 New Holland 806 Finger Reels – Steel 2 Prong Tyne 80435428 $6

HPNH 1106 New Holland – All European Pick up Reels, 1500 Series, 705 & 805 Fronts, Steel 2 Prong Tyne 80433415 $7

HC783845 Paddle Tyne – Level 1 Hart Carter Reel (1990-1998). For light crops – use approximately 60 on a 30ft front $8

HC783846 Paddle Tyne – Level 2 Hart Carter Reel (1999 onwards). For light crops - replaces 20% of Standard Tynes $9

Order No. Description and Model Application Price

UHC-211 RT-985RT-767

Level 2 1999 onwards


Hart Carter Tyne Bars

AgcoHC481834

30ft tyne bar (no tynes or end cranks) $3008837mm Level 1 (Prior 1999) 081 41/2” Tyne Spacing

HC100581

30ft tyne bar (no tynes) $3308864mm long Level 2 581 End Cranks Included 6” Tyne Spacing

Case-IHHC481834

30ft Tyne Bar (no tynes or end cranks) $300Suits 1010 1020 Fronts 8837mm long, Level 1 (Prior 1999) 081 41/2” Tyne Spacing

HC100581

30ft Tyne Bar (no tynes) $330Suits 1010 1020 Fronts 8864mm long, Level 2 581 End Cranks Included 6” Tyne Spacing

HC781086

Wooden Bat with Steel Tynes - 2400mm $200Suits early models - late 80’s, early 90’s - 2400mm

HoneybeeHC482139

30ft Tyne Bar (no tynes or end cranks) $3008916mm long, Level 1 (Prior 1999) 082 41/2” Tyne Spacing

HC100582

30ft Tyne Bar (no tynes) $3308952mm long Level 2 582 End Cranks Included 6” Tyne Spacing

HC481901

18ft Tyne Bar (no tynes or end cranks) $250Suits 36ft left or right reel – Level 1(Prior 1999) 41/2” Tyne Spacing

HC481902L

18ft Tyne Bar (no tynes) - Left $285Suits 36ft – Level 2 End Cranks included 6” Tyne Spacing

HC481902R

18ft Tyne Bar (no tynes) - Right $285Suits 36ft – Level 2, End Cranks included 6” Tyne Spacing

HBTB21L


HBTB21R

21ft Tyne Bar (no tynes) - Right $300Suits 42ft – Level 2 End Cranks included 6” Tyne Spacing

HBTB22L


HBTB22R

22ft tyne bar (no tynes) - Right $310Suits 45ft – Level 2 End Cranks included 6” Tyne Spacing

John DeereHC482014

30ft Tyne Bar (no tynes or end cranks) $300 Suits 200 Series fronts & some early 900 Series fronts8764mm long, Level 1 (Prior 1999) 080 41/2” Tyne Spacing

HC482015

30ft Tyne Bar (no tynes) $330Suits 900 Series fronts 8790mm long, Level 2 (1999 onwards) 580 End Cranks Included 6” Tyne Spacing

HC100582

30ft Tyne Bar (no tynes) $330Suits 630 Fronts 8952mm long Level 2 582 End Cranks Included 6” Tyne Spacing

JDTB35

35ft Tyne Bar (no tynes) - Single Piece $475Suits John Deere 635 Draper End Cranks Included 6” Tyne Spacing

HC164898

36ft Tyne Bar (no tynes) - Single Piece $475Suits John Deere 936 Draper End Cranks Included 6” Tyne Spacing

JDTB40L

20ft Tyne Bar (no tynes) - Left $300Suits John Deere 640D 40ft – Level 2 End Cranks included 6” Tyne Spacing

JDTB40R

20ft Tyne Bar (no tynes) - Right $300Suits John Deere 640D 40ft – Level 2 End Cranks included 6” Tyne Spacing

MidwestMWTB20L

20ft Tyne Bar (no tynes) - Left $300Suits Midwest 40ft with Hart Carter Reel End Cranks included 6” Tyne Spacing

MWTB20R

20ft Tyne Bar (no tynes) - Right $300Suits Midwest 40ft with Hart Carter Reel End Cranks included 6” Tyne Spacing

MWTB21L


MWTB21R


MWTB22L


MWTB22R


MWTB25L


MWTB25R


New HollandHC482014

30ft Tyne Bar (no tynes) $3008764mm long Level 1 (Prior 1999) 080 Suits 971 Front41/2” Tyne Spacing

HC482015

30ft Tyne Bar (no tynes) $3308790mm long Level 2 580 Suits 971 972 973 Fronts End Cranks included 6” Tyne Spacing

Centre TubesHC782285

30ft Centre Tube $1850including welded flanges or lugs (detail model being fitted to)

CTERW30 30ft Centre Tube – No Flanges $1200 8” Diameter

HC783925 36ft Centre Tube including welded lugs $3350Suits JD 36ft Draper Front (10” diameter)

Long length tyne bars can be expensive to freight. We can supply each bar in 2 pieces to reduce the time and cost of freight. Additional cost is $60 per bar. Each 2 piece bar is provided with a solid

centre clamp. No welding or drilling is required - just 2 nuts to tighten.


Hart Carter Tyne Reel Parts

HC243714 Reel Arm Bearing Half $3Suits most reels since approx 1990 (including all JD 909 Series Draper above S/N 706081)

HC243724 Reel Arm Bearing Half $8Suits reel – John Deere Draper Front 900 Series – early – up to S/N 706081

HC28803 Reel Arm Bearing Half $7.50Suits reels on John Deere Draper 630D 635D 640D 645D Latest Design Original Part: AXE28803 NEW

HC243325 Reel Arm Bearing Half $2.50C-IH 1010 with wood bats – and JD 36ft Draper Front Ends of reel only

HC243310

Reel Arm Bearing Top $2.40Cap C-IH 1010 with wood bats

HC243320

Reel Arm Bearing Base $2.80C-IH 1010 with wood bats

HC204110

U Bolt $3.70Suits C-IH 1010 with wood bats

HC243720

End Shield Bearing – male thread $5All Level 1 and Level 2

HC243721

End Shield Bearing – female thread $4All Level 1 and Level 2

HC243340

Super oilite bearing $13

HC480750

Eccentric control ring - 6 hole $200Suits all Level 1 and Level 2 6 Bar Reels

HC480720

Eccentric control ring – 5 hole $220Suits Level 1 5 Bar Reels

HC243719

Ball bearing roller $40Suits all Level 1 and Level 2 since 1990

HC243330

Ball bearing roller early type $45(No threaded stud)

HC482398

Eccentric end shield – 6 bar models $400Suits all Level 1 and Level 2

HC481952

Eccentric end shield – 5 bar models $450

HC481775 Reel Arm $14Suits Level 1 and Level 2 8” Barrell

HC170318 Reel Arm $26Suits 10” Barrell Early JD 36Ft typeOriginal Part: H170318

HC205470 Reel Arm $18Suit 10” Barrell Later JD 30 & 36Ft typeOriginal Part: H205470

HC780189 Reel Arm – early type $27

HC481265 Reel Arm – early type $30

HC481776 Bearing strap suits HC243714 bearing half $5

HC782453

Driving end shaft $480Level 1 8” Barrel (detail model being fitted to)

HC782122

Idling end shaft $220Level 1 8” Barrel (fits all models)

HC783211

Driving end shaft $440Level 2 8” Barrel (detail model being fitted to)

HC783397

Idling end shaft $300Level 2 8” Barrel (fits models since 1999)

HC782117 Right hand crank arm for bar $65Level 1 prior 1999

HC782118 Left hand crank arm for tyne bar $65Level 1 prior 1999

HC783326

Driving end shaft $625JD 36ft Draper Platform – early – up to S/N 706081 (AH164074) 10” Barrel Reinforcing dish is on outside

HC783852

Driving end shaft $625JD 36ft Draper Platform – current – above S/N 706081 (AH206803) 10” Barrel Reinforcing dish is on inside

HC783327

Idler end shaft $525JD 36ft Draper Platform – early – up to S/N 706081 (AH164075) 10” Barrel Reinforcing dish is on outside

HC783851 Idler end shaft $525JD 36ft Draper Platform – above S/N 706081 (AH206801 AH215184) 10” Barrel Reinforcing dish is on inside

HC204800

Socket Head Shoulder Screw and Nut $17

HC782689

Left hand end bracket $250(detail model being fitted to)

HC782691

Right hand end bracket $250(detail model being fitted to)

HC481996 Segment – Eccentric end shield $55(some reels JD and New Holland)

Universal Harvester (U2) Reel Parts (Fitted to some Honeybee Draper Fronts)


Macdon Reel Parts

Mid West Reel Parts

New Holland Reel Parts

MD100295 Reel Arm Bearing $6.50Suits CIH Belt Front 2052 Macdon 973 some 972 Case-IH 345853A1

MD48083 Reel Arm Bearing $10Suits CIH Belt Front 1040 1042 Macdon 960 962

MD137539

Reel Arm Bearing $8Suits D60 D65 Macdon Reel & Case-IH

UHC225 Tip Plate $6

UHC235 Ball Bearing $14

UHC241B Ball Bearing Holder Assembly $35

UHC2413 Ball Bearing Holder Assembly $24Original Part: NH73356395

UHC245 5 Bat control ring including Bearings $290

UHC247 6 Bat control ring including Bearings $330

UHC255

Fixed Control Arm for 42” Diameter Reel $22

(135/8”)

UHC256 Regular Control Arm for 42” Diameter Reel $20(12 13/32”)

UHC265 5 Bat Shield Section for 42” Diameter Reel $45

UHC266

6 Bat Shield Section for 42” Diameter Reel $45

UHC2801-2 Control Plate Assembly/Tube Inserts (2) $225

UHC-290

Control Plate Roller $45 (No threaded stud)

MD137983 End Tyne Bush (goes with MD137539) $2Use 3 per bat suits D60

MD50185

Bearing – End of cam arm $10Model 2100 Tyne Reel (973)

MD50184

Bearing – Cam Ring $20Model 2100 Tyne Reel (973)

MD102786

Flange – Finger Tube $30Model 2100 Tyne Reel below S/N 115999

MWECR

Eccentric Control Ring $85 Midwest Fronts 2009 on

HPNH2294

Reel Arm Bearings $4 Suits 3040 3045 3050 Original Part: 9832294

Mid West Fronts used Hart Carter Reels until 2009. See pages 5,6 and 7 for parts for these.

A full range of spare parts are available for Air Reels.

Please ring for details.

Grain Tank Extensions


Case-IHBT24581B Case-IH 2166 2366 2.5 Tonne $3500

BT29944 Case-IH 2144 2344 2188 2377 2388 2577 2588 2.8 Tonne $3100

BT26301 Case-IH 8010 8120 9120 (add to original equipment extension) 2.5 Tonne $1800

John DeereBT24545 John Deere 9500 9510 9550 9560CWS CTS CTSII 2.8 Tonne $3100

BT24546 9600 9610 9650CWS 9660CWS 3.0 Tonne $3100

BT25583 Auger Cover Panel – Use with Big Top 24545 $180

and 24546 on models prior to 2002

BT25434 9650STS 9750STS 9660STS 9670STS 9760STS 9770STS 9860STS 9870STS 3.0 Tonne $3500

New HollandBT24152 TR87 88 89 97 98 99 2.5 Tonne $2900

Order Model Increased Price No. Application Capacity

Extra capacity is measured in relation to the original grain tank without “Hungry Boards”WARNING: Use of this product is at the owner’s discretion. Increasing grain capacity may adversely affect centre of gravity, stability and controllability. Exceeding maximum combine weight loadings can risk structural integrity and drive line components. Harvestaire Pty Ltd does not assume any liabilities, or make any warranties regarding the

performance or structure of the combine. See combine owner’s/operator’s manual for specific limitations, operating recommendations and safety information.

More Time Harvesting ...Less Time Emptying

• Add up to 3 tonne (of wheat) to your capacity

• Folds Down – Easily & Quickly• Colour matched to your harvester

• Complete with wiring harness for bin level sensor and lights on some models

Canola and Lupin BreakersThese simple serrated brackets are attached to the cross auger on rigid to help break up bulky lupins or direct headed canola so the crop feeds better. Easily retracted out of the way for cereal crop harvesting.

HPJDLB Canola and Lupin Breaker $12 ea (including bolts & nuts)

Order No. Description Price

Moisture, Test Weight & Temperature Meters


WILE 65 Moisture MeterFor whole grains and seeds. Clear and big LCD display.Moisture measurement range: grains and seeds 8 - 35%; oil seeds 5 - 25%. Contains 16 pre-programmed grains. Has memory for averaging results. Calibration adjustment for each grain type.

Can be used with WILE 651L Temperature Probe.

WILE65

WILE651L

$695

$165

WILE 78 Grinding Moisture MeterThe WILE 78 is the top of the range model that measures 21 grains and seeds. Wide moisture range 3 - 40%, dependent on the grain.Accuracy: +/- 0.5% under normal conditions.Specially coated teeth for longer life. Ergonomically designed cap. Backlit display. Strong aluminium construction.

WILE78 $865

WILE 200 Grain Moisture Meter and Test WeightThe Wile 200 is a fast and easy way to determine moisture and test weight. The meter has a patented integrated levelling system for the grain sample, USB port for future updates and LCD dislay with backlight.Wide moisture range of 6 - 45%, depending on the grain.Repeatability: +/- 0.3% with average samples.

WILE200 $995

WILE 26 Moisture Meter (includes Wile 251 Moisture Probe)Hay, silage and haylage moisture tester with text display.

Measurement range: baled hay and silage 10 - 73%; loose hay and silage 13 - 85%.

Maximum bale density 440kg/m3

Can be used with WILE 651L Temperature Probe.

WILE26

WILE651L

$550

$140

WILE 253 Dish ProbeDish probe for Wile 26 for measuring moisture of loose hay or silage in a bucket.

WILE253 $155

WILE 651L External Temperature Probe - 100cm (40”)Temperature probe, suitable for Wile 65 and Wile 26 moisture meters. Robust and light glassfibre shaft.

WILE651L $140

Description Code Price ex GST


Grain and Seeds

Hay

WILE 651L

WILE 651L

by

WILE Cotton Moisture MeterFor analysis of moisture in loose raw cotton. Includes six calibrations for different types of loose raw cotton which differ by quality and amount of debris. Moisture measurement range: 5.2 - 30%.Accuracy: +/- 2% moisture.REqUIRES A 50cm probe

WILECOTTON

WILE251

$400

$120


Cotton

(includes Wile 251 Moisture

Probe)

WILE 251

Moisture, Test Weight & Temperature Meters


WILE Coffee Moisture TesterFor analysis of moisture in coffee and cocoa beans. Includes scales for arabica, robusta, roasted coffee and cocoa beans. Moisture measurement range: 1 - 38% depending on bean type.Accuracy: +/- 0.5% moisture.

WILECOFFEE $690

WILE 251 Bale Moisture Probe, 50cm (20”)For Wile 25 and Wile 26 hay and silage moisture meters. Used also together with Wile Cotton moisture meter.

WILE251 $120

WILE 241 Hectolitre ScaleHectolitre scale for grain

WILE241 $60

Carrying CaseIncluding a carry strap

WILE2480 $35

Grain Measure Cup WILE2485 $10

CAP CompleteFor WILE 55 65 66 Grain Measure Meters

WILE2400 $50

CapFor WILE78 Grain Moisture Meter

WILE2404 $160

Battery CoverAluminium, model before 2007

WILE2430 $7

Battery CoverModel since 2007 (plastic frame)

WILE2432 $7

Rubber PlugWILE 26 / 65. For external temperature probe connector.

WILE2454 $9

Calibration Screwdriver WILE2487 $8




Coffee

Soil

Spare Parts and Accessories

Soil Compaction TesterThe Soil Compaction Tester will help you to determine if you have a compaction layer and, if so, the depth of the layer. The tester is supplied with two tips 1/2” diameter and 3/4” diameter.

WILESOIL $400

Unload Auger Clutch System

LANJD1000K High Unloading Rate (HUR) models Unloading Auger Clutch System $4975 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670

LANJD2000K High Unloading Rate Unloading Auger CLutch System $4975 S680 S690

Order No. Model Application Item Price


NEW

Empty your Unloading Auger without having to empty the Grain Tank.

The system uses an electromagnetic clutch on the cross augers in the grain tank.

It is operated by a foot switch in the cab. The kit comes with a full wiring harness, clutches and sprockets.

Chaff Spreader

CASE-IH CNH JD NH

The ExTENDER is a simple add-on kit for Case-IH, Gleaner, John Deere, Massey Ferguson and New Holland Headers. Use the ExTENDER for safe, fast unloading into chaser bins, field bins, trucks and semi trailers.

Is your Unloading Auger too short?

Case-IH – Axial Flow EXT-CIH-FT3 1644 1666 1688 2144 2166 2344 2366 2188 2388 2588 36” Extension inc Spout $1700 EXT-CNH-FT3R 7010 8010 – to 2006 7120 8120 9120 6088 7088 36” Extension inc Spout (Red) $3250

7230 8230 9230 ECNH216B 8230 9230 8240 9240 16” Diameter Auger 36” Extension $3500

EXT-CNH-FT070R 7010 8010 (2007 & 2008 Models Only) 36” Extension inc Spout (Red) $2250

John Deere EXT-JD-FT3 9650STS 9750STS 12¾” Diameter Auger 36” Extension inc Spout $1600

9400 to 9610 inclusive CTS CTSII

EJ603514 9560STS 9660STS 9760STS 14” Diameter Auger 36” Extension $2000 9670STS 9770STS S670 S680 S690

EJ603517-4 9660STS 9760STS 9860STS 17” Diameter Auger 48” Extention $2750 9670STS 9770STS 9870STS S670 S680 S690 High Unloading Rate Auger

New Holland EXT-NHT-FT2 TR88 TR89 TR98 TR99 TX66 TX68 36” Extension inc Spout $2950

EXT-CNH-FT3 CR940 CR960 CR970 CR9060 CR9070 to 2006 36” Extension inc Spout (Black) $3250 CR9080 CR9090 CX840 CX860 CX880 CR7.90

EXT-CNH-FT070B CR940 CR960 CR970 2007 2008 Models Only 36” Extension inc Spout (Black) $2250

ECNH216B CR8090 CR9090 16”Diameter Auger 36” Extension $3500

Massey Ferguson EXT-AGCOMF-FT3 8570 to 8780 9690 9790 36” Extension inc Spout $2500

EXT-EMGL4215-R 9795 9895 9560 9540 9520 36” Extension inc Spout (Red) $3250

Agco/Allis EXT-GL-FT212 Gleaner N+R Series 12” Diameter Auger 24” Extension $2650 EXT-GL-FT214 Gleaner N Series R62 R72 R76 R86 S77 14” Diameter Auger 24” Extension $1950

Spare Parts EXT-GSDSL Small Left Hand Spring for Grainsaver Door Case-IH, John Deere $12

EXT-GSDSR Small Right Hand Spring for Grainsaver Door Case-IH, John Deere $12

EXT-GSDSC Large Centre Spring for Grainsaver Door CNH Models $19

EXT-CIHSPOUT Spout Only – suits EXT-CIH-FT3 EXT-NHT-FT2 $175

EXT-JDSPOUT Spout Only - suits EXT-JD-FT3 $175

EXT-CNH-FSSP Spout Only – suits EXT-CNH-FT3 $595


NEW

NEW


Auger Extensions

NEWNEW

NEW


2 Finger Knife Guards

KG31 1116504 71341601 Agco/Allis BC225 $21 KG400 113400M1 Massey Ferguson Draper Front FG306 $30

KG32 633098R1 International 810 Front TPQ265 $22

KG33 - John Deere – 200 & 900 series fronts, Prairie Mac Swather, Massey Ferguson, BC240 $18

New Holland 705 806 Fronts (Replace 134024) Agware Swather

KG42 219191 New Holland Haybines & 971 Fronts, Case-IH – 1010 Fronts & Swathers BU215A $18

1307299C1 & Mower Conditioners, Macdon Windrowers, Hesston Hay & Westward – late model or 215

KG42C Guard for Centre of Double Knife Drive NH and CIH Mower Conditioner $34

KG44 118344 118484 Macdon Draper Fronts, Case-IH Draper Fronts $20

KG44CTR CentreKnife Guards suit Macdon Double Knife Drive $38

KG44HE Knife Head End Guards $28

KG208 676235 Claas (OEM 767265.1 626295.1) 532676 $22

KG209 194.0290.00 Versatile Swather BU290 $24

KG210 1041468M1 Praire Mac & MF Swather, Westward early model 235RS $24

KG1588 - Macdon Swather or Belt Front (Stubby cutting edge) BU250 $25

GDJD1 H229539 H213405 John Deere Draper Fronts – 2 Long Prongs, 1 Short Prong $26

GDJD2 H229540 H213508 John Deere Draper Fronts – 1 Long Prong, 2 Short Prongs $26

KG840 379720 New Holland Draper Front 740CF 840CD 880CF CaseIH 3020 3152 3162 379720 $28

KG10616 - SCH Knife Guard – Honeybee – 2 Prong - $26

KG10637 - SCH Knife Guard – 2 Prong suits centre where Double Knife Drives overlap - $70

KG10701 - SCH Knife Guard – 2 Prong Open Top – suits Knife Drive End - $60

KG10712 - SCH Knife Guard – 3 Prong Head End - $60

KG10717 - SCH Knife Guard – Honeybee – 3 Prong - $85

SHIM-1 - Knife Guard Shim 1mm thick $1.40



PSFS10X8 - Wear Strip Suit Primary Sales Knife Guards $10.50

HPJD8526 H228526 John Deere 600 Series Draper Fronts $26

HPJD9623 HXE19623 John Deere 600 Series Draper Fronts $72

HPJD8172 HXE18172 John Deere 600 Series Draper Fronts $66

Order No. Original Part No. Model Application Marks On Guard Price

KG44

KG10637 KG10701 KG10712 KG10717KG10616

KG33KG32KG31 KG42 KG208

KG1588KG400 KG840

KG210KG209

GDJD1

GDJD2

No Choke 4 in 1 Knife Guards

Innovative Knife Guards and Cutting Systems reduce crop losses.

Reduce shatter loss without chokingHigh quality forging. The “Rolls Royce” of Double Density KNIFE GUARDS. Reduces sideways travel of crop over 50% for less shatter and less wasted grain.

NO CHOKE – Knife Section projects past the short prong to cut through thick or tangled crops.

Every second prong is short which gives you all the advantages of extra cutting edges without choking.

NO CHOKE 4 in 1 Knife GuardsFor Medium to Heavy legumes eg. Lupins, Faba Beans, Chick Peas and all Wheat, Barley, Oats and Canola.

High Quality German SteelHigh Quality Heat TreatmentThe whole guard is heat treated and case hardened to make it tough, then the cutting edges are heat treated separately to a very high hardness for long life.

Can be used with or without Harvestaire Plastic Extension Fingers

NC4IN1CI Case-IH Macdon Honeybee $32 New Holland & Mid West Belt Fronts

Case-IH 3050 Vari-Cut 3152 Rigid 3162 Flex New Holland 840CD New Holland 971 71C 73C Case-IH 1010 1020 2020 Marks on Guard: 7228 Uses 7/16” Bolts

NC4IN1ENDGD End Guard suits Knife Drive Ends $45 Case-IH & Macdon Belt Fronts (3 required per Knife Drive End) Suits NH971 71C 73C Case-IH 1010 2010 2020 (1 required per Knife Drive End) Uses 7/16” Bolts

NCCTRHB Centre Guard suits Honeybee Case-IH $55 Macdon and Mid West Double Knife Drive (3 required per Front) Uses 7/16” Bolts

NC4IN1CTR

Centre Guard suits $90 New Holland 971 71C 73C, Case-IH 2010 2020 (1 per Front) Uses 7/16” Bolts

NC4IN1JD John Deere 200 & 900 Series Rigid Fronts $38 New Holland 806 Front

Marks on Guard: 7222 Uses 3/₈” Bolts

NC4IN1AC Agco/Allis, Rigid and Belt Fronts $46 Marks on Guard: 7222 Uses 3/₈” Bolts

NC4IN1IH International 810 Fronts $38 Marks on Guard: 7226 Uses 3/₈” Bolts

SHIMS 1mm suits New Holland 971 71C 73C NO CHARGE Case-IH 2010 2020 Front (2 per guard)


Made in

Germany

for Long Life


Knife Guard Lifter Kits

KGLM353 Knife Lifter Kit suits Macdon 35ft Belt Front D60 (C-IH2152) - Double Knife Drive $3150

KGLM36 Knife Lifter Kit suits Macdon 36ft Belt Front – 960 – (C-IH1040) - Single Knife Drive $1700

KGLM361 Knife Lifter Kit suits Macdon 36ft Belt Front – 962 – (C-IH1042) - Single Knife Drive $1850

Model 962’s will also need an original Macdon 960 Knifehead 37835 – see below

KGLM362 Knife Lifter Kit suits Macdon 36ft Belt Front 972 (C-IH1052) - Single Knife Drive $2000



KGLM40D Knife Lifter Kit suits Macdon 40ft Double Drive D60 (C-IH2152), D75 (C-IH 3152, 3162), New Holland 83C $3350

KGLM45D Knife Lifter Kit suits Macdon 45ft Double Drive D60 (C-IH2152), D75 (C-IH 3152, 3162), New Holland 83C $3550

Spare PartsKDAMAC Knife Drive Arm suits 960 Lift Kit – Macdon (C-IH 1040) $650

KDAMAC2 Knife Drive Arm suits 962 973 Lift Kit – Macdon (C-IH 1042 2052) $650

KDAMAC3 Knife Drive Arm suits 972 Lift Kit – Macdon (C-IH 1052) $650

LKHMAC Macdon Part No. 37835 Knifehead suits 960/962 $270

LKHMAC1 Macdon Part No. 113688 Knifehead suits 972 $270

LKHMAC5 Macdon D60 (2152) Knifehead (Specify left or right) – 5˚ Tilt $270

LKHMAC10 Macdon 973 (2052) Knifehead (specify left or right) – 10˚ Tilt $270

Order No. Model Application Price

Lift the knife to the level of the belt.We strongly recommend that if you are using a Belt Front for

harvesting legumes (lupins, beans, peas) that a Lifter Kit be

fitted to raise the Knife level with the belt so that a lot of pods

do not fall off the Knife because of the step-up that is along the

front. We have kits to suit Macdon 960 962 972 973 D60 D65

D75 also sold as Case-IH 1040 1042 1052 2052 2152 3152

3162 Honeybee and New Holland. All kits include spacer bars,

bolts, nuts and adaptors to raise the knife drive.

For Legume HarvestingEXISTING Standard Belt Front

Knife Guard Mount

Belt

Spacer

MODIFIED BELT FRONT

Knife now level with belt

Step

Belt

Belt Front Example

Light Crops and Legume Harvesting


EXA John Deere 200 900 Rigid Fronts, New Holland 705 806 Fronts. Older Massey Ferguson. 4 per foot required $6 ea

All Agco/Allis Rigid fronts

EXB International 810 Fronts, KG33 Knife Guards on older John Deere and New Holland 4 per foot required $6 ea

KG10616 SCH Knife Guard – Honeybee – 2 Prong - $6 ea

EXC John Deere Draper Fronts – 900 and 600 Series 3 per foot required $6 ea

and Claas Knife Guard 0519.600.0 0519.601 4 per foot required $6 ea

EXCJD Clip suits plastic extensions EXC on John Deere Draper 72 per 36 foot required $1 ea

EXCBN ¾” x 3/8” cuphead bolt and nut suits clip on John Deere Draper 72 per 36 foot required $1 ea

EXE New Holland 971 71C 73C Fronts, Case-IH 1010 2010 & 2020 Fronts, Macdon Belt Fronts 4 per foot required $6 ea

to and including 972 (Case-IH 1052)

EXF Honeybee with Crary or Harvestaire No Choke Guards and Agco Belt Fronts 4 per foot required $6 ea

EXG Agco 71341601 Knife Guard (2007 onwards) 4 per foot required $6 ea

EXM Macdon D60 D65 D75 Belt Fronts (Case-IH 2152) New Holland 83C 4 per foot required $6 ea


Save heads in those light thin crops

Plastic Extension FingersManufactured from extremely tough, flexible and hard-wearing Polypropylene.

Steel insert

Positive and secure attachment to your existing knife guards with an existing bolt.

Ultra-violet stabilised material for long life.

Wide tray shape to save pods and heads. 50mm (2”) wide and 230mm (9”) long.

Fits original

2 Finger guards

or HarvestaireNo Choke

Guards

Draper Front Belting


USA

The Industry Leaders and suppliers to original equipment

Highest Quality Available from

Order No. Model Application and Details Price

All belting we supply is from WCCO and is the same specification they supply to header manufacturers. WCCO supply 90% of all original

equipment belting. All belting has been UV stabilised for long life. Edges and centre are reinforced with a double strip.

AgcoSide Belting (Sold per foot)

SBAG41 All Agco Draper Fronts 41” wide - no V guide $26 per ft

SBAG41A Agco Draper Fronts 9250 Series 41” Wide - V guide on edge $31 per ft

SBAG41B Agco Draper Fronts 5200 Series 41” Wide - V guide inset 100mm $31 per ft

Connector (Sold as a Kit)

BCAG41 Suits 41” side belting Includes Bolts and Nuts $45

Centre Feed Belt (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit)

FBAG60 Agco Draper Fronts 60” wide by 57½” long - no V guide $590

FBAG51 Agco Draper Fronts 9250 51.5” wide by 63” long – with V guide $510

ClaasSBCL395 Maxflo 1050 (35ft), 1200 (40ft) - Side Belting 1020mm wide with V guide $28

Honeybee also sold as New HollandSide Belting (Sold per foot)

SBHB42 All Honeybee - New Holland to approx 2009 42” wide - no V guide $27 per ft

SBHB4175 Honeybee - New Holland 2009 on 41.75“ wide - with V guide $31 per ft

SBMD416 Honeybee - 4000 Series 2015 on (Airflex) 41.6” wide - with V guide $32 per ft


BCHB42 Suits 41¾ “ and 42“ side Belting Includes Bolts and Nuts $52

BCHB69 Suits 69” Centre Belt Includes Bolts and Nuts $90

Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit) FBHB34 Honeybee - New Holland - Some early (2 required per machine) 34” wide - no V guide $210 ea

FBHB68 Honeybee - New Holland 2009 on 68.75” wide by 63” long - with V guide $570

FBHB69 Honeybee - New Holland to approx 2009 69” wide by 65” long - no V guide $510

FBHB4175 Honeybee - New Holland 2009 on (2 required per machine) 41.75“ wide - with V guide $375

Draper Front Belting


Order No. Model Application and Details Price

John DeereSide Belting (Sold per foot)

SBJD36 930D 936D Draper Fronts 36” wide - with V guide $28 per ft

SBJD395 630D 635D 640D Draper Fronts 39.5”wide - with V guide $31 per ft


BCJD36 Suits 36” wide belting Includes Bolts and Nuts $52

BCJD395 Suits 391/2” wide belting Includes Bolts and Nuts $52

BCJD55 Suits 55.3” wide centre belt Includes Bolts and Nuts $63

BCJD60 Suits 60” wide centre Belt Includes Bolts and Nuts $70

Centre Feed Belts (Sold as a Kit to exact size with joining holes pre punched and includes a Connector Kit)

FBJD60 930D 936D Draper Fronts 60” wide by 631/2“ long - with V guide $480

FBJD553 630D 635D 640D Draper Fronts (V Guide 115mm from edge) 55.3” wide by 58” long - with V guide $450

Midwest

Side Belting (Sold per foot)

SBMW36 All Midwest Draper Fronts 36” wide - with centre V guide $30 per ft


BCJD36 All 36” wide belting Includes Bolts and Nuts $52


FBMW44 Suit Midwest with narrow body centre design 44” wide – with V guide $370

FBMW60 Suit Midwest with wide body centre design 60” wide – with V guide $430

Case/New Holland Centre Feed Belt FBCNH42 Suits NH800 Series CIH31 Series (OEM 84289411) 42” wide $620

Macdon also sold as Case-IH and New Holland

Side Belting (Sold per foot)

SBMD416 All Macdon prior D60 and Case-IH prior to 2152 2162 41.6” wide - with V guide $32 per ft

SBMD416DG D60 D65 FD75 Macdon series 2152 2162 Case-IH 83C New Holland 41.6” wide - with double V guide $65 per ft

SBMD415 Early Case-IH swather, Agware swather 41.5“ wide - no V guide $26 per ft

SBHB42 Case-IH swathers – 8120 on, some Hesston and Versatile 42” wide - no V guide $27 per ft


BCMD416 Suits 411/2“, 41.6” side belting Includes Bolts and Nuts $52

BCHB42 Suits 42” side belting Includes Bolts and Nuts $52


FBMD374 Macdon, Case-IH 37.4” wide by 85¾“ long - with V guide $360

FBMD384 Macdon, Case-IH 38.4” wide by 97” long - with V guide $390

FBMD415 Macdon, Case-IH 41.5“ wide by 85¾“ long - with V guide $570

FBMD454 Macdon, Case-IH 45.4“ wide by 97” long - with V guide $425


FBMD559 Macdon, Case-IH 55.9“ wide by 97” long - with V guide $570


FBMDDG-IV Macdon, Case-IH, 83C New Holland 78.5“ wide by 63¾“ long - with single V guide $670

Full Roll Discount Available


Feed Belt Rollers

Honeybee Feed Belt Rollers

HBDR05 Side Belt Driving Roller Honeybee & New Holland (including Bearing) suits 42” Belting $525

HBDR10 Side Belt Idler Roller Honeybee & New Holland (including 2 Bearings) suits 42” Belting $425

HBDRC69 Centre Drive Roller (including Bearing) - Suit Honeybee $650

and New Holland suits FBHB69 Centre Feed Belt No Vee Guide

HBIRC69 Centre Idler Roller (including 2 Bearings) - Suit Honeybee $525

and New Holland suits FBHB69C

HBDRC68 Centre Drive Roller (including Bearing) - Suit Honeybee $650

and New Holland suits FBHB68 Centre Feed Belt No Vee Guide

HBIRC68 Centre Idler Roller (including 2 Bearings) - Suit Honeybee $525

and New Holland suits FBHB68C

HBHB Hexagonal Bearing - Suits Roller $48

HBHM40 OMP40 Hydraulic Motor suits Honeybee & New Holland Belt Fronts $800

HBHM50 OMP50 Hydraulic Motor suits Honeybee & New Holland Belt Fronts $825

Macdon Feed Belt Rollers

MDDR-3962 Side Belt Driving Roller Macdon 960 962 Case-IH Belt Fronts 1040 1042 2042 (No Bearings) MD113962 $525

CIH338721A1

MDIR-3320 Side Belt Idler Roller Macdon 960 962 Case-IH Belt Fronts 1040 1042 2042 MD Roller 43320 CIH 131499A1 $495

Roller and Shaft (No Bearings) MD Shaft 49056 CIH 338345A1

MDDR-3837 Side Belt Driving Roller Macdon 972 973 Case-IH Belt Fronts 1052 2052. (No Bearings) MD 113837 $495

CIH 395815A1

MDIR-0081 Side Belt Idler Roller Macdon 972 973 Case-IH Belt Fronts 1052 2052 MD 100081 $495

Roller and Shaft (No Bearings) CIH 87422036

MDDR-4696 Side Belt Driving Roller Macdon D60 D65 Case-IH 2152 New Holland 83C MD 174694 $525

MDIR-4714 Side Belt Idler Roller Macdon D60 D65 Case-IH 2152 New Holland 83C MD 17417 $375

MDLAG Lagging Kit for one Roller (3 pieces per roller) 43779 $125

MDDR-2205 Drive Roller to suit Case-IH 8820 $490

John Deere

JDDR36 Side Belt Driving Roller (including Bearing) Suit 936 Draper AH212964 $575

JDHB Hexagonal Bearing - Suit Draper Front Rollers $65

JDIR36 Side Belt Idler Roller (including 2 Bearings) - Suit 936 Draper H213230 H160572 $475

JDDRC900 Centre Drive Roller (including Bearing) - Suit JD 900 Series Draper Fronts AH212965 $695

JDIRC900 Centre Idler Roller (including 2 Bearings) - Suit JD 900 Series Draper Fronts H213228 $550

JDDR40 Side Belt Driving Roller (including Bearing) - Suit 635 640 645 Draper AXE16282 $575

JDDIR40 Side Belt Idler Roller (including Bearing) - Suit 635 640 645 Draper H216011 $475

Order No. Model Application and Details Original Part Price

Heavier Wall

Lasts Longer

Heavier Wall

Lasts Longer

NEW


Case-IH

PBCIHBO Belt suits 1015 403 503, 21¾” wide 601/8” long – (No Teeth Fitted) 60 Teeth $150

PBSMFB Front belt suits 2015 model, 18¾” wide 57¾” long – (No Teeth Fitted) $110

PBSMRB Rear belt suits 2015 model, 18¾” wide 57¾” long $100

John Deere

PBJDBO Belt suits 110 132 212 214 912 914 3 Roller Models 22” wide 66½” long – (No Teeth Fitted) 60 Teeth $150

PBJDBO5 Belt with holes 44½” wide x 57¼” long suits JD615P (No Teeth Fitted) 92 Teeth $300

Phillips Swathmaster

PBSMFB Front belt suits late model with ¼“ cleats. 18¾” wide 57¾” long – (No Teeth Fitted) 42 Teeth $120

PBSMRB Rear belt suits late model with ¼“ cleats. 18¾” wide 57¾” long $110

PBSMJNR Flat Joiner Strip incl Bolts and Nuts $20

PBSMFBW Front belt suits late model “Rollerdown” 37¾ ” wide 57¾ ” long (No teeth fitted) 84 Teeth $335

PBSMRBW Rear belt suits late model “Rollerdown” 37¾” wide 57¾” long $300

New Holland

PBNHBO Front Belt 1515mm wide suits NH790CP 1012062 84 Teeth $390

PBNHRB Rear Belt 1515mm wide suits NH790CP 1012063 $450

Victory

PBVICFB1 Front Belt 17½“ wide x 44¼” long (No Teeth Fitted) 01290-110001 60 Teeth $110

PBVICRB1 Rear Belt 17½“ wide x 44¼” long 01300-110002 $100

PBVICFB2 Front Belt 17½“ wide x 53½” long (No Teeth Fitted) 720010 78 Teeth $110

PBVICRB2 Rear Belt – Plain Belt 17½“ wide x 53½” long 013005-110003 $140

Teeth

PBTEETH-SP Single Prong Teeth Victory $1

PBTEETH-DP Double Prong Teeth suits Case-IH, John Deere, Smales, Swath Master, Allis $1.80

PBBN Bolt and Nut suits double prong teeth ¾” (No fangs) $0.50

PBSPBN Bolt and Nut – suits single prong teeth 1” (No fangs) $0.85

PBJB Bolt and Nut – to join ends of Pick Up Belts ¾” (With fangs) $1.75

Order No. Model Application and Details Original Part Teeth/Belt Price

Pickup Belts

NEW

NEW

NEW


Improved Concaves for Axial Flow and Rotaries

• Slower Rotor Speeds • Wider Concave Openings• Improved threshing • Reduced rotor losses • Fuel savings

Work longer each day – Start earlier – Finish later

HelicalBar Concaves

The Helical placement of the bars in these concaves is used so the material approaches the bars at right angles – this gives a greater threshing action.

The improved threshing action gives you more harvesting hours in the day in those tough crops.

The tougher the crop – the more these concaves shine!

Case-IH Axial Rotor Machines show excellent improvement in threshing capability when fitted with these concaves – If you have a specialty rotor, use them with Gorden Rotor Bars for the ultimate performance improvement.

Use one or two segments in JD and Case-IH (except Case-IH 8010-9230 – needs a set – one left and one right).

Case-IHHBCIHC40 Helical Bar Concave Segment with wires 1640 1644 1460 1660 1666 2166 2366 $1600

and feed lip

HBCIHC80 Helical Bar Concave Segment with wires 1680 1688 2188 2377 2388 2577 2588 6088 7088 7130 $1625

and feed lip

HBCIH8010 Helical Bar Concave Set with wires 8010 8120 8230 9120 9230 7010 7120 7230 7240 - early $2500

(Includes 1 left , 1 right) 8240 - early, 9240 - early per set of two

John DeereHBJDSTS Helical Bar Concave Segment with wires 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS $2000

and feed lip S660 S670 S680 S690

CJDSTSLK Latch Kit – ‘60’ Type – Set of 3 When fitting to 9650STS or 9750STS $100

per set of three

Order No. Item Model Application Price

Case-IH 8010-9230

John Deere STSCase-IH 66 and 88 Series

Australian Patent 683397 Applies.


Concaves

Fully Machined Concaves that make a real difference to your threshing.Most harvesters now use a Rotary or Axial Flow threshing cylinder design. This has increased tonnes per hour dramatically in recent years.

A properly tuned harvester will thresh and separate to a high standard.

Because clearances of rotor bars from concaves are commonly greater than more conventional concaves they are often regarded as not so critical.

But clearances are critical whenever threshing gets hard and concaves have to be closed up. So we strongly recommend rotor bars are shimmed to a uniform clearance off the concaves so you are ready for tough threshing conditions.

Heavy Duty Harvestaire concaves are heavier than originals. This reduces stretch and bowing (or opening up) of concaves which means some areas of the concaves are further away from the rotor bars than others.

Axial Flow and Rotary Models

Conventional

Concaves

Agco/Allis

CGL-R6272 R62, R72 Concave only $2000

CGLG-R6272 R62, R72 Grate only $2500

Case-IH

CIHC-1420-5 1420, 1620 Set of 3 Concaves – No Extensions $2400 a set

CIHC-1440-5 1440, 1460, 1640, 1660, 1644, 1666, 2144, 2166, 2366 Set of 3 Concaves – No Extensions $2400 a set

CIHC-1640-5 1640, 1660, 1644, 1666, 2144, 2166, 2366 Set of 3 Concaves – Incorporating Extensions and front lip $2700 a set

CIHC-1640-5F 1640, 1660, 1644, 1666, 2144, 2166, 2344, 2366 Front Concave segment with front lip $1050 ea

CIHC-1640-5MR 1640, 1660, 1644, 1666, 2144, 2166, 2344, 2366 Middle/Rear Concave segment $1000 ea

CIHC-1680-5 1680, 1688, 2188, 2377, 2388, 2588, 7088 Set of 3 Concaves – Extensions and front lip – Heavy Duty $4000 a set

CIHC-1680-5F 1680, 1688, 2188, 2377, 2388, 2588, 7088 Front Concave segment with front lip – Heavy Duty $1350 ea

CIHC-1680-5MR 1680, 1688, 2188, 2377, 2388, 2588, 7088 Middle/Rear Concave segment – Heavy Duty $1200 ea

NB. Concave includes extension piece therefore stronger & less expensive – applicable to CIHC -1640-5 and CIHC-1680-5.

CIHC-8010LH 8010, 7010, 7120, 8120, 9120, 7230, 8230, 9230 Left Hand Concave $825

CIHC-8010RH 8010, 7010, 7120, 8120, 9120, 7230, 8230, 9230 Right Hand Concave $825

Caterpillar/Claas

CCAT480 Lexion 480, 580 Heavy duty wire and bar type $3000

CFD-116 Claas Heavy duty wire and bar type $1600

John Deere

CJD-7720-2 7720 & 7720 Titan 2 14 cross bars Wrap Around $1550

CJD-8820-2 8820 & 8820 Titan 2 14 cross bars Wrap Around $2100

CJD-9400 9400, 9500, CTS, CTSII Wrap Around - Small Grain - 14 Cross Bars $2400

CJD-9600 9600, 9610 Wrap Around - Small Grain - 14 Cross Bars $2800

CJD-STS-9660 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Set of 3 Concaves – Standard Wire Spacing for small grain $3600

9670STS, 9770STS, 9870STS, S660, S670, S680, S690 with front lip 31 Wires per Concave

CJDSTS-9660W 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Set of 3 Concaves – Wide Wire Spacing with front lip $4000

9670STS, 9770STS, 9870STS, S660, S670, S680, S690 14 Wires per Concave

CJDSTS-9660F 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Front Concave Segment – Standard Wire Spacing for small grain $1350

9670STS, 9770STS, 9870STS, S660, S670, S680, S690 with front lip

CJDSTS-9660WF 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Front Concave Segment – Wide Wire Spacing with front lip $1450

9670STS, 9770STS, 9870STS, S660, S670, S680, S690

CJDSTS-9660-MR 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Middle Rear Concave Segment – Standard Wire Spacing $1200

9670STS, 9770STS, 9870STS, S660, S670, S680, S690 for small grain

CJDSTS-9660WMR 9650STS, 9660STS, 9750STS, 9760STS, 9860STS Middel/Rear Concave Segment – Wide Wire Spacing $1350

9670STS, 9770STS, 9870STS, S660, S670, S680, S690

CJDSTSLK Latch Kit – ‘60’ Type – Set of 3 When fitting CJDSTS9660 or CJDSTS-9660W to ‘50’ Series STS $100 set of 3

Order No. Model Application Description & Comments Price

All Concaves are fitted with Wires


Concaves


Concave Wire for Repairs and ReplacementWire 3 3.15mm Diameter Per Metre $1.90

Wire 3.5 3.50mm Diameter Per Metre $2.00

Wire 4 4.00mm Diameter Per Metre $2.10



Sold by the metre and supplied in a coil, just cut to length

and fit – High Tensile Spring Wire – Wear Resistant.

New Holland Conventional Headers

CNH-860 CX820 CX840 CX860 CX880 CX8080 $1850

CNH-34 TX34 TX64 TX65 $1750

CNH-36 TX36 TX66 TX68 $2000

New Holland Twin Rotor Machines

CNH96-11 TR86 above S/N 526601 TR96 above S/N 527821 Concaves, replace 686669LH and 686668RH (Includes Wires) $4250

TR87 88 89 97 98 99

CNH-960 CR920 CR940 CR960 CR9040 CR9060 Concave – OEM 87536102 – Fits left or right (Not inc Extension) $1575 ea

OEM 47449673

CNH-960-Ext CR920 CR940 CR960 CR9040 CR9060 Concave Extension replaces 86585615 (Fits left or right) $875 ea

CNH-970 CR8090 CR970 CR980 CR9070 CR9080 CR9090 Concave – OEM 87651759 – Fits left or right $1700 ea

(Not inc Extension)

CNH-970-Ext CR8090 CR970 CR980 CR9070 CR9080 CR9090 Concave Extension replaces 86585617 (Fits left or right) $1050 ea

Order No. Model Application Description & Comments Price

per set of 2

All Are Fitted With

Wires

All Concaves are fitted with Wires

Rotor Bars & Drumbars

Are your Rotor Bars and Drumbars worn?Worn bars cost you money in extra fuel, time and poor threshing.

If the leading edge or centre section are worn more than 3 mm (1/8“) then they need replacement.

We have high quality sets of Drum and Rotor Bars Available. All sets are matched for weight for a balanced Rotor/Drum and come with bolts, nuts,

washers and shims so you can set a uniform clearance from the concave.

Available in two different grades:Standard Hard – equivalent to original equipment.

Chrome – The ultimate in long life and we have chrome or chrome alloy available in most bars.


Agco/Allis

OGL-N-1 OGLN1C N & R Series – P1 Processor 8L Threshing cylinder, angle long bars $990 $1330

OGL-N-2 OGLN2C N & R Series – P1 Processor 6L & 2R Separator cylinder, angle short bars $625 $900

- OGL-4050CL R Series with P3 Processor Chrome Forward 1/2” Tooth Spacing (Left) – $125 ea

- OGL-4050CR R Series with P3 Processor Chrome Reverse 1/2” Tooth Spacing (Right) – $125 ea

- OGL-4050WCL R Series with P3 Processor Chrome Forward ¾” Tooth Spacing (Left) – $125 ea

- OGL-4050WCR R Series with P3 Processor Chrome Reverse ¾” Tooth Spacing (Right) – $125 ea

Case-IH

OIHC-1420 1420 1620 Axial Flow 16 8 helical, 8 flat bars suits standard rotor $725 –

OIHC-1440 OIHC1440C 1440 1460 1640 1660 21 12 helical, 9 flat bars suits standard rotor $875 $1400

1666 2144 2166 2344 2366

OIHC-1480 OIHC1480C 1480 1680 1688 2188 2377 28 16 helical, 12 flat bars suits standard rotor $975 $1750

2388 2577 2588

- OIHC-NS-2CA 1666 2166 2366 1688 2188 2377 54 Rotor bar chrome alloy $38 ea

2388 2577 2588 6088 66 or 74 suits specialty rotor

7088 7010 7120 7240 8010 8120

8230 8240 9120 9230 9240

OIHCWS1 1666 2166 2366 1688 2188 2377 Rotor Bar chrome alloy suits specialty rotor $42

2388 2577 2588 6088 with spike

7088 7010 7120 7240 8010 8120

8230 8240 9120 9230 9240

Model Application No. of Bar Type & Particulars Standard Standard Bars Hard Chrome Hard Chrome Price Price

All sets include Bolts, Nuts, Washers & Shims in the price.



Case-IH continued

SPRIHC-S 20’s 2 Straight separator bar $110 ea –

40’s 60’s 44’s 66’s 3

77’s 80’s 88’s 8

SPRIHC-40 1666 2166 2344 2366 Helical kicker plate – Rear $130 ea –

(Speciality Rotors only)

SPRIHC-80 1688 2188 2377 2388 6088 7088 2 Helical kicker plate – Rear $130 ea –

2577 2588 7010 8010 7120 7230 (Speciality Rotors only)

7240 8120 8230 8240 9120 9230 9240

STRIHC-S 20’s 4 42” smooth bar $80 ea –

40’s 60’s 44’s 66’s 3 Hardened

80’s 88’s 4

STRIHC-T 20’s 4 42” toothed bar $105 ea –

40’s 60’s 44’s 66’s 3 Hardened

80’s 88’s 4

Claas OFD114 - Mega 203 204 114 3L & 3R Angle Bars $700 –

DRBSC Drum bar shim 0.5mm – Claas only 50c ea

Caterpillar

OCAT480 - 460 480 480R 4L & 4R Angle Bars – Bolt on $1000 –

OCAT480W - 480 480R 4L & 4R Angle Bars – Bolt & Weld on $1000 –

Drum Bar Shims

DRBS All Makes & Models Drum Bar Shim 0.5mm (20 Thou of an inch) 40c ea

DRBS2 Drum Bar Shim 2mm 50c ea

John DeereOJD-7700 OJD-7700C 7700 7720 7720 Titan 2 4L & 4R Angle bars $900 $1300

OJD-8820 OJD-8820C 8820 8820 Titan 2 4L & 4R Angle bars $990 $1350

OJD-9500 OJD-9500C 9400 9410 9500 9510 5L & 5R Angle bars $1000 $1550

CTS CTSII 9650CTS

OJD-9600 OJD-9600C 9600 9610 9650CWS 9660CWS 5L & 5R Angle bars $1100 $1700

John Deere STS and CTS STS Threshing Elements

OJD-E-STS50H 9650STS 9750STS 9660STS 9760STS Set of 3 Hardened $380 –

9860STS 9670STS 9770STS 9870STS Threshing Elements

S660 S670 S680 S690 (5 sets per machine)

OJD-TS-CTSH CTS CTSII 9650CTS 9660CTS 16 Tyne Short Hardened – separator $22 –

OJD-TL-CTSH CTS CTSII 9650CTS 9660CTS 28 Tyne Long Hardened – separator $25 –

OJD-T-STS50H 9650STS 9750STS 9660STS 9760STS, Set of 3 Hardened Tynes $150 –

9860STS 9670STS 9770STS 9870STS 9880STS or separator (8 sets per machine)

S660 S670 S680 S690 Original Part: AH208554




Massey FergusonOMF-750-1 - 750 850 4L & 4R Angle bar $900 -

OMF-760-5 - 760 860 4L & 4R Angle 5-hole bar $950 -

New HollandONH-8060 - 8060 8070 TX34 TX64 4L & 4R Angle bar $900 –

ONH-8080 8080 TX36 TX66 TX68 4L & 4R Angle Bar $975 –

ONHCX-820 - CX820 CX840 CX860 CX880 CX8080 CX8090 5L & 5R Angle bar $1275 –

ONH-96H ONH-96C TR86 above Serial No 529739 $3000 $4100

TR96 above Serial No 529779 24 12 Flat & 12 Angle

TR87 TR88 TR89 TR97 TR98 TR99

CR920 CR940 CR960 CR9040 CR9060

ONH-970H - CR970 CR980 CR9070 CR9080 36 9L & 9R Flat $4500 –

CR9090 9L & 9R Angle

HPNH-1610 - CR920 CR940 CR960 36 Separator Blade $13 ea

CR970 CR980 CR9070 CR9080 CR9090 54 inc. Bolts/Nuts




Gorden Concave Cover Plates

It’s vital to shim yourdrum or rotor bars for

proper threshing

Gorden Rotor Bars

SP16601 1666 2166 2366 2144 2344 $185 ea

Max 15 Bars per Rotor

SP1680C1 1688 2188 2388 7010 7120 7230 7240 $185 ea

8010 8120 8230 8240 9120 9230 9240

(Except ST Rotor with smaller tube) Max 20 Bars

SP2388R 1688 2188 2388 7010 7120 7230 7240 $185 ea

8010 8120 8230 8240 9120 9230 9240

(Separator Bar - Rear of Rotor)


CP2166 Cover Plate Set of 3 1640 1660 1666 $440

2166 2144 2344 2366

CP2188 Cover Plate Set of 3 1680 1688 2188 2388 2588 7088 $460

Order No. Description Model Application Price • For improved threshing• Avoid overloading

the right hand side distribution augers

Fit to the front concave segment and the first half of the second segment.

For Case-IH Specialty RotorsEach Gorden Rotor Bar replaces two original bars. These bars achieve:-

• SUPERIOR THRESHING • LESS ROTOR LOSS

• INCREASED CAPACITY but Less HP and Fuel

Made from 15-3 chrome alloy. After 2000+ hours you can barely see any wear – the chrome is right through the bar. (Not just chrome plated).

Fit a max of 15 bars on 2166 2144 2366 2344 1666 1644 – fit in sets of 3. Fit a max of 20 on 2188 2388 2377 1688 1680 – fit in sets of 4.Fit a max of 16 bars on 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240

Wear Bars


Case-IH-Axial-FlowWBIHC-20H 1420 1620 2 Bar Set Replaces Part 183253C2 $290

WBIHC-40H WBIHC-40C 1440 1460 1640 1660 1644 1666 2144 2166 2344 2366 3 Bar Set Replaces Part 183253C2 $290 $460

WBIHC-80IH WBIHC-80IC 1480 1680 1688 2188 2388 2 Bar Set Replaces Part 183264C2 $212 $320

WBIHC 8010 7010 7120 7230 7240 8010 8120 8230 8240 2 Bar Set Replaces Part 87376702 $305

9120 9230 9240

John Deere – STSWBJD-4533 9650STS 9750STS 9660STS 9760STS Front Rotor Flight Kit Non Bullet Rotor (AH204533) $540 –

WBJD-4534 9650STS 9750STS 9660STS 9760STS Rear Rotor Flight Kit Non Bullet Rotor (AH204534) $540 –

New Holland – Twin RotorsWBNH-1H TR70 TR85 TR86 TR87 Replaces Part Set for very front of Rotors $450

TR88 TR89 86584739 consists of 2 Left Hand Bars &

TR96 TR97 TR98 TR99 2 Right Hand Bars

CR940 CR960 86584740 Hardened Bars

CR9040 CR9060 CR9070

WBNH-2H TR70 TR85 TR86 TR87 Replaces Part Set for front of Rotors but behind WBNH-1H $390

TR88 TR89 consists of 4 Left Hand Bars &

TR96 TR97 TR98 TR99 86584738 4 Right Hand Bars

CR940 CR960 86584737 Hardened Bars

CR9040 CR9060 CR9070

WBNH-19H CR970 CR980 CR9070 86705697 Set for Left Hand Rotor $540 –

CR9080 86705699 For Front of Rotor

WBNH-29H CR970 CR980 CR9070 86705698 Set for Right Hand Rotor $540 –

CR9080 86705700 For Front of Rotor

HPNH-6791 CR9040 CR9060 CR9070 87496791 Rotor Lug Right Hand Serrated $135

CR9080 CR9090

HPNH-6792 CR9040 CR9060 CR9070 87496792 Rotor Lug Left Hand Serrated $135

CR9080 CR9090

When the edges of your wear bars are worn, replace them with hardened or chromed wear bars.

Order No. Model Application Contents of Set Price Price Standard Chrome Standard Chrome

All SetsInclude Bolts

& Nuts In The Price

BK-20 1420 1620 2 1957447C3 $450

BK-40 1440 1460 1640 1660 1644 1666 2144 2166 2344 2366 3 1957446C3 $800

BK-80-1 1480 1680 1688 2188 2388 2577 Specialty Rotor 2 1957445C3 $800

BKAFX-2388 2388 AFX Rotor 2 434525A3 $800

Blade Kits are manufactured from abrasive resistant steel for longer wear. High strength. Grade 8 Bolts, Nuts included.

Order No. Model Application No. in Kit Original Part Price

Standard or speciality

AFX

Case-IH Axial Flow – Rotor Blade Kit (Elephant Ears)

Top Sieves, Bottom Sieves and Pre Cleaners


• Wires and Leuvres can be Replaced• Nylon Bushes on all Wires to

Drastically Reduce Wear

Nylon Anti-Wear

Bush

AIR FOIL LOUVRE TOP SIEVE

CUTLOSSES

CUTLOSSES

IMPROVECAPACITY

IMPROVECAPACITY

AirFoil bottom sieves are virtually impossible to overload as the louvres do not deflect or close up under a heavy stream of grain as is frequently the case with traditional bottom sieves, particularly when they are worn. This makes normal sieves very difficult to adjust. It’s common to find the normal sieve either putting too much good grain in the repeats or letting too much rubbish in the sample.• Strong Louvre Design prevents deflection by the weight of grain

AIR FOIL LOUVRE BOTTOM SIEVE

Airfoil Top Sieves have a unique Louvre design that divides the airflow and creates

a bed of air jets which float chaff up off the surface and allows the heavier grain to

easily separate and fall.

Our top and bottom sieves perform the same as originals, but have

nylon bushes so they don’t wear out!

STANDARD LOUVRE TOP & BOTTOM


Top Sieves

If your sieve is not listed please enquire. We can probably make to order.

Agco/AllisSGL-NRT PGL-NRT Allis N5 N6 N7 R60 R70 (491/2” Long) $1370 $1370

SGL-R62RT PGL-R62RT Agco R62 R72 R75 (64” Long) Advise if manual or electric $1670 $1670

Case-IHSIHC-1420RT PIHC-1420RT Inter 1420 Case-IH 1620 $1085 $1085

SIHC-1440RT PIHC-1440RT Inter 1440 1460 915 Case-IH 1640 1660 $1250 $1250

SIHC-1666RT PIHC-1666RT Case-IH 1644 1666 2144 2166 2344 2366 $1400 $1400

SIHC-1480RT PIHC-1480RT Inter 1480 Case-IH 1680 – Standard Length Sieve $1560 $1560

SIHC-1680RTL PIHC-1680RTL Case-IH 1680 – Long Sieve Models – 1688 2188 2388 2588 7088 $1785 $1785

SNH-960RT PNH-960RT Case-IH 7010 7120 $1160 $1160

SNH-970RT PNH-970RT Case-IH 7230 7240 8010 8120 8230 8240 9120 9230 9240 (set of 2 required) $1025 ea $1025 ea

CaterpillarSCAT-470RT PCAT-470RT Caterpillar 470 (set of 2 required) $1025 ea $1025 ea

SCAT-480RT PCAT-480RT Caterpillar 460 480 (set of 2 required) $1160 ea $1160 ea

John DeereSJD-7700RT PJD-7700RT John Deere 7700 7720 $1350 $1350

SJD-7720T2RT PJD-7720T2RT John Deere 7720 Titan 2 $1475 $1475

SJD-8820-RT PJD-8820-RT John Deere 8820 $1700 $1700

SJD-8820T2RT PJD-8820T2RT John Deere 8820 Titan 2 $1850 $1850

SJD-9500RT PJD-9500RT John Deere 9400 9500 CTS CTSII (set of 2 required) $590 ea $590 ea

SJD9500E – 9400 9410 9500 9510 CTS CTSII Extension $535 $535

SJD-9600RT PJD-9600RT John Deere 9600 9610 (set of 2 required) $775 ea $775 ea

SJD9600E – 9600 9610 Extension $590 $590

SJD-9650RT PJD-9650RT John Deere 9650 9750 – STS Models $1450 $1450

Manual Adjustment version (Fits some early ‘60’ series also)

SJD-9660RT PJD-9660RT John Deere 9660 9760 9860 9670 9770 9870 STS Models $1450 $1450

Electric Adjustment version (Fits some late ‘50’ series also)

SJD-670RT PJD-670RT John Deere S660 S670 S680 S690 Single Adjustment - Electric $1685 $1685

SJD-690RT PJD-690RT John Deere S660 S670 S680 S690 Dual Adjustment - Electric $1735 $1735

HPJD-4081 HPJD-4081 Wiring Harness AXE14081 Suit most STS Models $185 $185

Massey FergusonSMF-9700RT PMF-9700RT MF9720 and White 9700 $1780 $1780

SMF-8780RT PMF-8780RT Massey Ferguson 8570 8780 9690 $1780 $1780

SMF-9790RT PMF-9790RT Massey Ferguson 9790 9795 9895 Challenger 670 $1945 $1945

New HollandSNH-8060RT PNH-8060RT New Holland 8060 8070 $1120 $1120

SNH-70RT PNH-70RT New Holland TR70 TR85 TR86 TR87 TR88 $970 $970

SNH-95RT PNH-95RT New Holland TR95 TR96 TR97 TR98 TR99 TR89 $1300 $1300

SNH-TX34RT PNH-TX34RT New Holland TX34 TX64 TX65 $1200 $1200

SNH-TX66RT PNH-TX66RT New Holland TX66 TX68 (set of 2 required) $1000 ea $1000 ea

SNH-960RT PNH-960RT New Holland CR940 CR960 CR9060 CR7090 CR8080 CR9060 $1160 $1160

(Not including linkages)

SNH-970RT PNH-970RT New Holland CR970 CX860 CX880 CX8080 CX8090 $1025 ea $1025 ea

CR8090 CR9070 CR9080 CR9090 (Not including linkages)

(set of 2 required)

SNH-70E – TR70 TR85 TR86 TR87 TR88 Extension $395 $395

SNH95E – TR95 TR96 TR97 TR98 TR89 TR99 Extension $660 $660

Order No. Model Application Price Standard Air Foil Standard Air Foil Louvre Louvre Louvre Louvre

Bottom Sieves


Agco/Allis

SGL-NB PGL-NB Allis N6 N7 R60 R62 R70 (421/2” Long) $1260 $1260

SGL-R62B PGL-R62B Agco R62 R72 R75 (57¼” Long) $1485 $1485

Case-IH

SIHC-1420B PIHC-1420B Inter 1420 Case-IH 1620 $975 $975

SIHC-1440B PIHC-1440B Inter 1440 1460 Case-IH 1640 1660 $1080 $1080

SIHC-1666B PIHC-1666B Case-IH 1666 1644 2144 2166 2344 2366 $1225 $1225

SIHC-1480B PIHC-1480B Inter 1480 Case-IH 1680 Standard Length Sieve $1400 $1400

SIHC-1680BL PIHC-1680BL Inter 1680 Long Sieve Case-IH 1688 2188 2388 2588 7088 $1485 $1485

SNH-960B PNH-960B Case-IH 7010 7120 $1140 $1140

SNH-970B PNH-970B Case-IH 7230 7240 8010 8120 8230 8240 9120 9230 9240 (set of 2 required) $920 ea $920 ea

Caterpillar

SCAT480B PCAT480B Caterpillar 480 $885 $885

John Deere

SJD-7700B PJD-7700B John Deere 7700 7720 $1100 $1100

SJD-7720T2B PJD-7720T2B John Deere 7720 Titan 2 $1200 $1200

SJD-8820B PJD-8820B John Deere 8820 $1275 $1275

SJD-8820T2B PJD-8820T2B John Deere 8820 Titan 2 $1365 $1365

SJD-9500B PJD-9500B John Deere 9400 9500 CTS CTSII (set of 2 required) $690 ea $690 ea

SJD-9600B PJD-9600B John Deere 9600 9610 (set of 2 required) $830 ea $830 ea

SJD-9650B PJD-9650B John Deere 9650 9750 STS Models $1340 $1340

Manual Adjustment Version (Fits some early ‘60’ series also)

SJD-9660B PJD-9660B John Deere 9660 9760 9860 9670 9770 9870 STS Models $1340 $1340

Electric Adjustment Version (Fits some late ‘50’ series also)

SJD-670B PJD-670B John Deere S660 S670 S680 S690 $1660 $1660

HPJD-4081 HPJD-4081 Wiring Harness AXE14081 Suit most STS Models $185 $185

Massey FergusonSMF-9700B PMF-9700B Massey Ferguson 9720 & White 9700 $1490 $1490

SMF-8780B PMF-8780B Massey Ferguson 8570 8780 9690 $1545 $1545

SMF-9790B PMF-9790B Massey Ferguson 9790 9795 9895 Challenger 670 $1660 $1660

{Advise if manual or electric}

New HollandSNH-8060B PNH-8060B New Holland 8060 8070 (specify 1250mm or 1260mm wide) $1100 $1100

SNH-70B PNH-70B New Holland TR70 TR85 TR86 TR87 TR88 $945 $945

SNH-95B PNH-95B New Holland TR95 TR96 TR97 TR98 TR89 TR99 $1275 $1275

SNH-TX34B PNH-TX34B New Holland TX34 TX64 TX65 $1160 $1160

SNH-TX66B PNH-TX66B New Holland TX66 TX68 (set of 2 required) $900 ea $900 ea

SNH-960B PNH-960B New Holland CR940 CR960 CR9060 CR7090 CR8080 $1140 $1140


SNH-970B PNH-970B New Holland CR970 CR8090 CR9070 CR9080 CR9090, $925 ea $925 ea

CX860 CX880 CX8080 CX8090 (set of 2 required)





Pre Cleaners


SJD-9650PF John Deere 9650 9750 9660 9760 9860 9670 Adjustable Pre Cleaner $1260

– Flat Style (Qty 8 M8 welded in bolts)

SJD-9660PH John Deere 9650 9750 9660 9760 9860 9670 9770 Adjustable Pre Cleaner $1340

– Hump style (Qty 8 M8 welded in bolts)

SJD-9870PF John Deere 9770 9870 Adjustable Pre Cleaner $1260

– Flat style (Qty 4 M10 welded in bolts)

SJD-9870PH John Deere 9870 Adjustable Pre Cleaner $1340

– Hump style (Qty 4 M10 welded in bolts)

SJD-670PH John Deere S660 S670 S680 S690 Adjustable Pre Cleaner $1340

– Hump style (Qty 8 M10 loose bolts)

Most JD STS’s have fixed louvres on the precleaner. The Harvestaire Precleaner can be adjusted so you can clean up the sample and get maximum capacity. Complete with anti-wear nylon bushes.

STS Adjustable Precleaner

Case-IH

SNH-960P PNH-960P Case-IH 7010 7120 Precleaner $1125 $1125

SNH-970P PNH-970P Case-IH 7230 7240 8010 8120 8230 8240 9120 9230 9240 Precleaner $1195 $1195

John Deere

SJD-9500P PJD-9500P John Deere 9500 CTS CTSII Precleaner (set of 2 required) $600 ea $600 ea

SJD-9600P PJD-9600P John Deere 9600 9610 Precleaner (set of 2 required) $775 ea $775 ea

New Holland

SNH-960P PNH-960P New Holland CR940 CR960 CR9060 CR7090 CR8080 Pre Cleaner $1125 $1125

SNH-970P PNH-970P New Holland CR970 CR8090 CR9070 CR9080 CR9090 $1195 $1195

CX860 CX880 CX8080 CX8090 Pre Cleaner



Gorden AirJet Sieve

Canola.125” (3.15mm) Round holes

Large Wheat.3” (7.62mm) Hex holes

Lupins/Barley.45” (11.4mm) Hex holes

For improved capacity and cleaner samples

• No adjustment required – just set the fan speed and go • Mesh elements available for different crops • Easily changed – the frame remains in position

Case-IH Axial FlowAJCIH2388 1688 2188 2377 2388 2588 7088. Air Jet sieve frame $1350

AJNWLCN Set of canola elements suits AJCIH2388 $2050

AJNWLWH Set of large wheat elements suits AJCIH2388 $1900

AJNWLB Set of lupin/barley elements suits AJCIH2388 $1900

AJCIH2366 1666 2166 2366 2144 2344. Air Jet sieve frame $1200

AJNLCN Set of canola elements suits AJCIH2366 $1550

AJNLWH Set of large wheat elements suits AJCIH2366 $1450

AJNLB Set of lupin/barley elements suits AJCIH2366 $1450

John DeereAJJD9650 9650 9750 9660 9760 9860 9670 9770 9870 STS Models Air Jet Sieve Frame $1250

AJJD670 S660 S670 S680 S690 Air Jet Sieve Frame $1400

AJJDNWLW Set of large wheat elements suits AJJD9650 $1900

AJJDNWLB Set of large lupin/barley elements suits AJJD9650 $1900

AJJDNWLWS Set of large wheat elements suits AJJD9670 $1900

AJJDNWLBS Set of large lupin/barley elements suits AJJD9670 $1900

Case-IH 7230 8010 8120 8230 9120 9230 & New Holland CR8090 CR970 CR9070 CR9080 CR9090AJCNH T CIH 7230 7240 8010 8120 8230 8240 9120 9230 9240 Air Jet sieve frame (2 required per machine) $700

& NH CR8090 CR970 CR9070 CR9080 CR9090

AJCNH P CIH 7230 7240 8010 8120 8230 8240 9120 9230 9240 Air Jet precleaner frame (1 required per machine) $700

& NH CR8090 CR970 CR9070 CR9080 CR9090

AJCNHCNWP Set of canola elements suits AJCNHP – Precleaner $1050

AJCNHCNNT Set of canola elements suits AJCNHT – Sieve – (Enough for 1 machine) $1300

AJCNHLWP Set of large wheat elements – Precleaner $900

AJCNHLWT Set of large wheat elements – Sieve – (Enough for 1 machine) $1200

AJCNHLBP Set of lupin barley elements – Precleaner $900

AJCNHLBT Set of lupin barley elements – Sieve – (Enough for 1 machine) $1200

Order No. Model Application & Description Price

How AirJet™ Sieves WorkThe thin layer of high velocity air streaming from the AirJet™ above the screen blows chaff rearward. The heavier grain penetrates the streaming air and falls through the screen. The screens face towards oncoming grain for faster separation. Screen hole size is selected to match specific crops.

AIR JET

AIR JET

MESH ELEMENTS AVAILABLE:

NEW

Canola Sieves


Agco/Allis

ECGL-R62T Agco R62 R72 Top $1000

Case-IH

ECIHC-1666T Case-IH 1666 2166 2366 1644 2144 2344 Top $910

ECIHC-1680T Inter 1680 LONG SIEVE Case-IH 1688 2188 2388 2377 7088 2588 Top $1040

ECNH66T (set of 2 required) Case-IH 7230 7240 8010 8120 8230 8240 9120 9230 9240 Top $550 ea

ECNHCR960T Case-IH 7010 7120 Top $940

Caterpillar

ECMF9790T Challenger 670 Top $1130

ECCAT480T (set of 2 required) Lexcen 460 480 Top $550 ea

John Deere

ECJD-9500T (set of 2 required) John Deere 9400 9500 CTS CTSII 9450 CWS 9550 CWS Top $450 ea

ECJD-9600T (set of 2 required) John Deere 9600 9610 9650 CWS 9650 CTS Top $510 ea

ECJD-9650T John Deere 9650 9750 9660,9670 9760 9860 9870 STS Top $990

ECJD-S670T John Deere S660 S670 S680 S690 Top $1000

Massey Ferguson

ECMF8780 Massey Ferguson 8780 9690 Top $1000

ECMF9790 Massey Ferguson 9790 9795 9895 Top $1120

New Holland

ECNH-70T New Holland TR85 TR86 TR87 TR88 Bottom or Top $700

ECNH-70E New Holland TR85 TR86 TR87 TR88 Extension $280

ECNH-95T New Holland TR95 TR96 TR97 TR98 TR89 TR99 Bottom or Top $880

ECNH-95E New Holland TR95 TR96 TR97 TR98 TR89 TR99 Extension $340

ECNH-66T (set of 2 required) New Holland CR970 CR8090 CR9070 CR9080 CR9090 Top $550 ea

CX860 CX880 CX8080 CX8090 TX36 TX66 TX68

ECNHCR960T New Holland CR940 CR960 CR6090 CR7090 CR8080 Top $940

ECNH960P New Holland CR940 CR960 CR6090 CR7090 CR8080 Precleaner $750

ECNH970P New Holland CR970 CR8090 CR9070 CR9080 CR9090 Precleaner $800

This special mesh sieve has been specifically designed for Canola. If you are experiencing trouble with a Dirty Sample the use of our Mesh Sieve should clean up your canola and avoid the need to grade it after Harvest. These Sieves are fitted with Expanded Metal Mesh. We guarantee these Sieves will get your Canola clean enough to meet receival standards.

PLEASE NOTE: Being a Mesh Sieve, occasional cleaning with a simple scraper may be required if your Canola has radish, volunteer cereals, green or excessive trash.

We can make to suit any harvester not listed above

These Sieves will get you through the tough

receival standards

Order No Model Application Price

Posifeed Rollers

The posifeed rollers are made as a triangular shape with rings for the chains to run on.

The crop can be taken away more effectively as it has room between the slats of the feeder chain and open segments of the triangular roller.

Crop feeds in more continuously and smoothly and doesn’t feed in lumps.

Posifeed Rollers overcome poor feeding at the feeder house or can be used as a replacement roller

AgcoPFRGL6272 Posifeed Roller R62 R72 $1150

Case-IH

PFRCIH60 Posifeed Roller 1420 1440 1460 1620 1640 1660 – suits 2 & 3 chain $950

1644 1666 2144 2166 2344 2366

PFRCIH80 Posifeed Roller 1480 1680 – suits 2 & 3 chain $975

1688 2188 2377 2388

PFRCIH88 Posifeed Roller 2377 2588 6088 7088 $1075

John Deere

PFRJD9500 Posifeed Roller 9400 9410 9500 9510 CTS CTSII $1275

9650STS 9750STS 9760STS 9860STS

PFRJD9600 Posifeed Roller 9600 9610 $1500

PFRJD70 Posifeed Roller 9670STS 9770STS 9870STS S660 S670 S680 S690 $1250

PFRJD60AK Bearing Housing - 3 Hole Required to fit roller to 9660STS 9760STS and 9860STS (2 required) 3 Hole $85

PFRJD60AK4 Bearing Housing - 4 Hole Required to fit roller to 9660STS 9760STS and 9860STS (2 required) 4 Hole $50

New HollandPFRNHTR86 Posifeed Roller TR87 above S/No 557068 TR88 TR89 TR86 $1060

(10¾” Diameter) TR97 TR98 TR99 TR96 above S/No 529778

(3 Bolt Bearing Housing) Use where original roller is 12” diameter. If original roller is 9” add links to feeder chain

PFRNH960 Posifeed Roller (6 Bolt Bearing Housing) CR940 CR960 CR9060 CR7090 CR8080 $1260

PFRNH970 Posifeed Roller – Suit 3 Chain CR970 CR8090 CR9070 CR9080 CR9090 $1375

CX860 CX880 CX8080 CX8090

PFRNH9070 Posifeed Roller - Suit 4 Chain CR8090 CR9070 CR9080 CR9090 $1375

Order No. Item Model Application Price

HEAVY DUT Y


Feeder Chains


Agco/AllisFGL-NB N5, N6, N7, R60, R70 CA557 3 Chain Heavy Duty U Slat suits Front or Rear $1360 ea

FGL-4050 R40, R50, R42, R52 early CA550 2 Chain 85 Links Heavy Duty U Slat suits Front or Rear $760

FGL-6272-27 R62, R72 CA557 3 Chain 96 Links Heavy Duty U Slat suits Front or Rear $1415 ea

Case-IHFIHC-1440-37 1420, 1440, 1460, 1620, CA557 3 Chain Heavy Duty U Slats. Extra Sprocket and $1000

1640, 1660, 1644, 1666 Feed Roller Bands required if fitting for first time

FIHC-1440-16-7 1420, 1440, 1460, 1620, CA557 2 Chain $945

1640, 1660, 1644, 1666

FIHC-1480-37 1480, 1680 CA557 3 Chain Heavy Duty U Slats. Extra Sprocket and $1030 Feed Roller Bands required if fitting for first time

FIHC-1480-16-7 1480, 1680 CA557 2 Chain $1000

FIHC-2166-37 2144, 2166, 2366 CA557 3 Chain Heavy Duty U Slats $1030

FIHC-2188-37 1688, 2188, 2377, 2388 CA557 3 Chain Heavy Duty U Slats $1060

2588, 5088, 6088, 7088

FIHC-8010-7-12 Case-IH 8010 (Early model) CA557 2 Chain Heavy Duty U Slats (127/8” centre to centre on chains) $975 ea

2 required per machine

FIHC-8010-7 Case-IH 7010, 8010 CA557 2 Chain Heavy Duty U Slats (18” centre to centre on chains) $975 ea 2 required per machine

FIHC-9642 Case-IH 7120, 7230, 7240, CA557 4 Chain Heavy Duty U Slats Suits NO ROCKTRAP $2140 8120, 8230, 8240, Chain Spacing across Feeder House 14”, 15½ “, 14” 9120, 9230, 9240 115 Links 42 Slats Original Part 84179642

FIHC-9639 Case-IH 7120, 7230, 7240, CA557 4 Chain Heavy Duty U Slats Suits WITH ROCKTRAP $1830 8120, 8230, 8240, Chain Spacing across Feeder House 12”, 15½ “, 12” 9120, 9230, 9240 97 Links 36 Slats Original Part 84179639

Please check chain spacing across the Front Roller

Order No. Model Application Chain Number Description Price Type Of Chains

Improved Hi-tensile Slats

• Top Quality Italian Chains

• All Slats Serrated

• Large stocks on hand at the right price

Feeder Chains

Case-IHFIHC-2166-16-7C 2144 2166 2366 CA557 2 Chain $1000

FIHC-2188-16-7C 1688 2188 2388 CA557 2 Chain $1030

FEEDRBKITS Axial Flow models pre 1993 31/8” Feed Roller Band Kit to fill recesses on $120

FEEDRBKIT2 Axial Flow models 1993 on 31/2” Feed Roller to allow for 3 Chain conversion $120

(1420 to 2388 models)

CaterpillarFCAT-480L Lexion 460 480 – left side CA624 2 Chain 108 links Heavy Duty U Slat $970

FCAT-480R Lexion 460 480 – right side CA624 2 Chain 108 links Heavy Duty U Slat $970

FCAT-470 Lexion 470 CA624 3 Chain 108 links Heavy Duty U Slat $1400

ClaasFCL86-108 Claas 203,204 CA624 3 Chain 108 links Heavy Duty U Slat $1350

FCAT750-4 Claas 750 CA624 4 Chain 107 links Heavy Duty Slat $2100

FCAT770-4 Claas 770 CA624 4 Chain 107 links Heavy Duty Slat $2100

Available All Other Claas Models On Request

John DeereFJD-6600 6600 6620 Titan 2 CA550 3 Chain Heavy Duty U Slat $1000

FJD-7700 7700 7720 7720 Titan 2 CA557 3 Chain Heavy Duty U Slat $1130

FJD-8820-4 8820 8820 Titan 2 CA557 4 Chain Heavy Duty U Slat $1650

FJD-9400 9400 9500 CTS CTSII CA557 3 Chain 26 Slats – 101 links $1300

9410 9510 9650CTS Heavy Duty U Slat

FJD-9600 9600 9610 CA557 4 Chain Heavy Duty U Slat $1800

9650CWS 9660CWS

FJD-9650 9650STS 9750STS CA557 3 Chain 30 Slats – 90 links Heavy Duty U Slat $1300

FJD-9660 9660STS 9760STS 9860STS CA557 3 Chain 30 Slats – 87 links Heavy Duty U Slat $1300

FJD-S670 9670STS 9770STS 9870STS CA557 3 Chain Heavy Duty Cast Slat - 21.65” Centres $1800

S660 S670 S680 S690

FJD-S670CH 9670STS 9770STS 9870STS CA557 3 Chain Set of Chains Only $1400

S660 S670 S680 S690

FJD-975 975 1075 CA624 3 Chain T Slat $1450

Massey FergusonFMF-8780-7 8560 8780 8780XP 9690 CA557 3 Chain Heavy Duty U Slat $1500

FMF-9790-7 9790 CA557 3 Chain Heavy Duty U Slat $1600

New HollandFNH-70-17 TR70 TR85 8040 CA557 3 Chain 15¼” Centre to Centre sprockets $1230

FNH-95-7 TR95 TR96 prior serial CA557 3 Chain 211/8” Centre to Centre sprockets $1125

FNH-87-1 TR85 TR86 TR87 TR88 TR89 CA557 3 Chain 171/8” Centre to Centre sprockets, 93 links $1285

TR96 TR97 TR98 TR99 Heavy Duty U Slats

FNH-CX860 CX840 CX860 CX880 CX8060 CA557 4 Chain Heavy Duty U Slats $2000

CX8070 CX8080 CX8090

FNH-CR960 CR920 CR940 CR960 CR6090 CA557 3 Chain Heavy Duty U Slats, 111 links $1570

CR7090 CR8080 CR9060

FNH-CR970 CR970 CR980 CR9070 CR9080 CA557 3 Chain Heavy Duty U Slats $1730

FNH-CR9090-47 CR8090 CR9070 CR9080 CR9090 CA557 4 Chain Heavy Duty Slats $2150

FNH-8060 8060 8070 CA557 3 Chain $1250

FNH-TX66 TX66 Early TX66 Standard CA557 3 Chain Heavy Duty Angle Slats $1650

FNH-TX64-7 TX64 TX65 CA557 3 Chain Advise if 20¼” or 22¼” centres $1600

Order No. Model Application Chain Number Description Price Type of Chains


Sprockets for Feeder Chains


Agco/AllisFM-150 N & R Series Feeder & Separator 13 1-½” Hex 71357768 $140

FM-154 R42 R52 R62 R72 13 1¾” Hex 71368861 $140

FM-155 R65 R66 R75 R76 MF8680 13 2” Hex 71394665 $180

Case-IHFM-9 1420 1440 1460 1480 1620, 9 1½” Hex 1970248C1 $95

1640 1660 1680 1644 1666 1688

2144 2166 2344 2366 2188 2388 2588

FM-91 As previous item – In Split Form 9 1½” Hex 1970248C1 $195

SPT-1680 Sprocket Tube for 3 Chain Feeder Chain 1½” Hex 1989587C2 $850

Suits 1688 2188 2388 2588 2377 2577 (sprockets flush with ends)

SPT-2577 Sprocket Tube for 3 Chain Feeder Chain 1½” Hex 87642397 $850

Suits 2388 above S/N HAJ03001 2577 2588

(sprockets inset from each end 50mm)

SPT-8010 Sprocket Tube for 2x2 Chain Feeder Chain 87284914 $1200

Suits 7010 8010 AFX8010 18” Ctr to Ctr on Sprockets

SPT-4906 Sprocket Tube for 4 Chain Feeder Chain with 14” 15½” 14” Sprocket centres $2300

Suits 7120 7230 7240 8120 8230 8240 9120 9230 9240

No Rocktrap. 84414906

SPT-4915 Sprocket Tube for 4 Chain Feeder Chain with 12” 15½” 12” Sprocket centres $2300

Suits 7120 7230 7240 8120 8230 8240 9120 9230 9240

With Rocktrap. 84414915

SPT-1680SK Stripper Kit suits 80 Series – 3 Chain $180

SPT-1660SK Stripper Kit suits 60 Series – 3 Chain $180

John DeereFM-102 6620 7720 8820 9400 9500 9600 CTS 10 1¾” Hex H118583 $95

FM-112 As previous item – in Split Form 10 1¾” Hex H118583 $150

FM-113 CTSII 9510 9610 9650 Outside 10 2¼” Round H159613 $60

FM-114 CTSII 9510 9610 9650 Centre 10 2¼” Round H159614 $75

FM-115 9650 STS 9750 STS 9670 to S/N 730100 13 2¼” Round H159615 $85

9660STS 9760STS 9860STS Outside

FM-116 9650 STS 9750 STS 13 2¼” Round H159616 $100

9660STS 9760STS 9860STS Centre

FM-474 9670STS 9770STS 9870STS, 13 2¼” Round H227474 $160

S660 S670 S680 S690

FM-044 955 975 1065 1075 1051 Outside 14 40mm Round Z11544 $105

FM-045 955 975 1065 1051 Centre 14 40mm Round Z11545 $80

New HollandFM-12 TR70 early TR85 Outside 12 1¾” Round 765720 $120

FM-120 TR70 early TR85 Centre 12 1¾” Round 765721 $120

FM-121H TR85 TR86 TR87 TR88 TR89 TR95 TR96, 12 1¾” Hex 80766379 $175

TR97 TR98 TR99 CR940 CR960 CR970

CR980 CR9060 CR9070 Outside

FM-122H TR85 TR86 TR87 TR88 TR89 TR95 TR96, 12 1¾” Hex 80766380 $175

TR97 TR98 TR99 CR940 CR960 CR970,

(Early CR9040 CR9060 CR9070) Centre

FM-1141 8040 8060 8080 TX34 TX66 TX68 10 46mm Round 84038624 $100

FM-1498 8040 8060 8080 TX34 TX66 TX68 Centre 10 50mm Round 84038625 $100

Order No. of Shaft No. Model Application Teeth Size Original Part Price

Hi-Tooth Slats

Grain Elevator Chains • All paddles are top quality new

insertion rubber – Tough and Hard wearing.

• Paddles are bolted to High Quality Italian chain.

Sprockets• We stock high quality sprockets to

suit nearly all the Feeder Chains and Grain Elevator Chains we sell.

• Some feeder house sprockets available in split form for ease of replacement.

FIHC 1440-3HT 1420 1440 1460 1620 CA557 3 Feeder Chain fitted with Hi-Tooth Slats $1185

1640 1660 1644 1666

FIHC 2166-3HT 2144 2166 2366 CA557 3 Feeder Chain fitted with Hi-Tooth Slats $1260

FIHC 2188-3HT 1688 2188 2377 2388 2588 CA557 3 Feeder Chain fitted with Hi-Tooth Slats $1310

SN12HT66 1460 1620 1640 1660, 2 Slat Insert – add to Original Slat on 2 Chain versions $50 ea

1644 1666 2144 2166 2366

SN12HT88 1480 1680 1688 2188 2 Slat Insert – add to Original Slat on 2 Chain versions $54 ea

SN10HT880E 2377 2388 2588 3 Slat replaces Original Slat on 3 chain versions $54 ea

Order No. Model Application Chain Number Description Price Type of Chains

Slat Inserts And Slats For Original Chains Order No. Model Application Chain Number Description Price Type of Chains

Positive Grabbing Of Crop Material

For greatly improved feeding in those thin or difficult to feed crops. Tried and proven on Case-IH.

Patent 2005 100049 Applies


Grain Elevator Chains


Agco/AllisGGL-N (34 Paddles) N5 up to 6100, N6 up to 7300, N7 CA550 $590 RGL-N (17 Paddles) CA550 $360

GGL-R40 (34 Paddles) R40, R50 CA550 $590 RGL-4252 (30 Paddles) CA550 $565

GGL-R60 (35 Paddles) R60, R70 (N5 above 6101, N6 above 7301) CA550 $615 RGL-N-27 (27 Paddles) CA550 $540

GGL-R62 (36 Paddles) R62 after 63001, R72 after 73001 CA550 $695 RGL-4252 (30 Paddles) CA550 $565

R42 after 43001, R52 after 53001

GGL-R62-7 (36 Paddles) R62 after 63001, R72 after 73001 CA557 $800 RGL-4252A (37 Paddles) CA550 $675

R42 after 43001, R52 after 53001

Case-IHGIHC-1420 1420, 1620 CA550 $665 RIHC-1460 CA550 $490

GIHC-1460 1440, 1460 CA550 $665 RIHC-1460 CA550 $490

GIHC-1660-7 1640, 1660, 1644, 1666, 2144 CA557 $800 RIHC-1460-7 CA557 $615

2166, 2344, 2366

GIHC-1480-1 1480, 1680, 1688 CA550 $665 RIHC-1460 CA550 $490

GIHC-1480-17 1480, 1680, 1688, 2188, 2388, 2588, 6088, 7088 CA557 $825 RIHC-1460-7 CA557 $615

GIHC-8010-7 7010, 7120, 8010, 8120, 9120 CA557 $920 - - -

CaterpillarGCAT460 450-470, 460-480 CA624 $770 RCAT460 CA624 $580

John DeereGJD6600-2 7700, 7720, 6620T2 CA550 $500 RJD6600-2 CA550 $435

GJD8820-1 8820, 8820T2, 7720T2 CA550 $445 RJD8820-1 CA550 $435

GJD9400 9400, 9500, 9510, CTS, CTS II CA550 $575 RJD9400 CA550 $485

GJD9600 9600, 9610 CA550 $575 RJD9400 CA550 $485

GJD9650-7 9650STS, 9750STS, 9660STS, 9760STS, 9860STS, CA557 $690 RJD9650-7 CA557 $460

(Paddle Size 87/8 “x 4¾”) Original Part AXE28559

GJD9670-7 9670STS, 9770STS, 9870STS CA557 $690 RJD9650-7 CA557 $460

S660, S670, S680, S690. (Paddle Size 8¾ “x 45/8”)

Original Part AXE28560

Massey Ferguson

GMF-750-2 750, 850, 760, 860 CA550 $695 RMF-750 CA550 $385

GW9700-1 9700, 8780 (Paddle Size 240MM x 80mm) CA550 $720 - - -

GMF-9790 8780, 9690, 9790 (Paddle Size 230mm x 105mm) CA557 $720 RMF-9790 CA557 $615

GW9700-2 8590, 9720 (Paddle Size 255mm x 90mm) CA550 $720 RMF-9790 CA557 $615

New HollandGNH-70-1 TR70, TR85, TR86, TR87, TR88, CA550 $365 RNH-70-4 CA550 $435

GNH-70-17 TR70, TR85, TR86, TR87, TR88 CA557 $450 RNH-70-47 CA557 $585

GNH-96-17 TR95, TR96, TR97, TR98, TR89 CA557 $510 RNH-70-47 CA557 $585

GNH-99-7 TR99 CA557 $510 RNH-70-47 CA557 $585

GNH-8060 8060, 8070, 8080 CA550 $390 RNH-8060 CA550 $310

GNH-8060-7 8060, 8070, 8080 CA557 $455 RNH-8060-7 CA557 $410

GNH-TX34 TX34, TX64 CA550 $475 - -

GNH-TX66 TX66 CA557 $540 - -

GNH-CR960-7 CR920, CR940, CR960, CR970, CR9070, CA557 $770 - -

CR9080, CR9090 , CX840, CX860, CX880, CX8080

CA557 is Heavy Duty

Order No. Model Application Chain Type Price Order No. Chain Type Price

CLEAN GRAIN RETURN GRAIN

Agco/AllisClean Grain Elevator Upper

SP099 N5 N6 N7 R60 R70 71327970 8 Tooth 1 ¼” Bore $88

SP095 R40 R50 71361974 8 Tooth 1” Bore $65

SP098 R42 R52 R62 R72 S67 S68 S77 S78 S88 – No Hub 71373688 8 Tooth NA $95

Clean Grain Elevator Lower

SP097 R40 R50 R60 R70 71352665 8 Tooth 1 ¼” Bore $60


SP106 N5 N6 N7 before Series 3 71196628 8 Tooth 1 ¼” Bore $75

SP105 N7 to S/N 4501 71195866 8 Tooth 1” Bore $70

Return Grain Elevator Upper

SP101 N5 N6 N7 R60 above S/No 15801 71147756 8 Tooth 1” Bore $50

SP095 R40 R50 R60 R70 71361974 8 Tooth 1” Bore $65


Return Grain Elevator Lower

SP095 N5 N6 N7 R40 R50 R60 R70 71361974 8 Tooth 1” Bore $65


Case-IHClean Grain Elevator Upper

SP116 1420 1620 168683C1 7 Tooth 1” Bore $90

SP117 1440 to S/N 10000 1460 to S/N 12000 165292C1 6 Tooth 1” Bore $90

SP119 1440 1460 above S/N 12001 1480 S/N 14001-34000 1302200C1 7 Tooth 1 1/8” Bore $115

SP122 1640 1644 1660 1666 1680 1688 2144 2166 2188 1317192C1 9 Tooth 1 ¼” Bore $125

2344 2366 2388 2577 2588

SP155 7010 8010 7120 8120 9120 7240 8240 9240 87283438 9 Tooth 35mm Bore $105

Clean Grain Elevator Lower


SP116 1440 above S/N 10001 1460 above S/N 12001 168683C1 7 Tooth 1” Bore $90

SP119 1480 above S/N 14001 1460 above S/N 12001 1302200C1 7 Tooth 1 1/8” Bore $115

SP120 1420 1620 1440 above S/N 30485 1460 above S/N 33286 1319176C1 7 Tooth 1 ¼” Bore $90

1480 above S/N 34001

SP122 1640 1644 1660 1666 1680 1688 2144 2166 2344 2366 1317192C1 9 Tooth 1 ¼” Bore $125

SP142 2188 2388 2588 2377 2577 2588 143960A1 9 Tooth 1 3/8” Bore $60

SP156 7010 8010 7120 8120 9120 7240 8240 9240 87283436 9 Tooth 45mm Bore $100

Return Grain Elevator Upper

SP117 1440 to S/N 10000 1460 to S/N 10000, 165292C1 6 Tooth 1” Bore $90

1480 to S/N 14000

SP116 1420 1440 above S/N 10001 1460 above S/N 13001 168683C1 7 Tooth 1” Bore $90

1480 1620 1640 1644 1660 1666 1680

1688 2144 2166 2188 2344 2366 2388 2577 2588

Return Grain Elevator Lower


SP116 1420 1440 above S/N 10001 1460 above S/N 12001, 168683C1 7 Tooth 1” Bore $90

1620 1640 1660 1644 1666

SP119 1480 above S/N 14000 1680 1688 1302200C1 7 Tooth 1 1/8” Bore $115

SP120 2144 2166 2188 2344 2366 2388 2588 144031A1 7 Tooth 1 ¼” Bore $90

John DeereClean Grain Elevator Upper

SP131 6620T2 7720 7720T2 8820 to S/N 464350 H108576 8 Tooth 1” Bore $50

SP132 8820 above S/N 464351 8820T2 H91334 8 Tooth 1 ¼” Bore $60

SP150 9400 9410 9500 9510 9600 9610 CTS CTSII H177988 8 Tooth 30mm Bore $70

SP154 9650STS 9750STS 9660STS 9760STS 9860STS H164796 8 Tooth 30mm Bore $60

SP158 9770STS 9870STS S660 S670 S680 S690 H228385 10 Tooth 35mm Bore $75

IMPORTANT NOTE: Before installing one or more sprockets, do a visual inspection on the used sprockets you plan to run together with a new sprocket. If you notice a substantial wear factor in any, then it is important to replace all the sprockets.

Order No. Model Application Original Number Shaft Size Price Part No. of Teeth


Sprockets for Grain Elevator Chains


Sprockets for Grain Elevator Chains

Order No. Chain Type Description PriceChain Spare Parts

John Deere continuedClean Grain Elevator LowerSP008 955, 975 to S/N 016667 Z10997 8 Tooth 25mm Bore $100SP009 975 above S/N 016668, 1065, 1075 to S/N 044137, 1051 Z11210 8 Tooth 30mm Bore $90SP132 6620T2, 7720, 7720T2, 8820, 8820T2 H91334 8 Tooth 1 ¼” Bore $60SP151 9400, 9410, 9500, 9510, 9600, 9610, CTS, CTS II, H133143 8 Tooth 35mm Bore $65 9650STS, 9750STS, 9660STS, 9760STS, 9670STS, 9770STS, 9860STS, 9870STSSP157 9770STS, 9870STS, S660, S670, S680, S690 H228383 10 Tooth 45mm Bore $70Return Grain Elevator UpperSP130 7720 to S/N 610500 H63578 7 Tooth 1” Bore $70SP131 7720 above S/N 610510, 7720T2, 8820, 8820T2 H108576 8 Tooth 1” Bore $50SP152 9400, 9500, 9600, 9610, CTS, CTS II H134603 8 Tooth 1” Hex $50SP150 9650STS, 9750STS, 9660STS, 9760STS, 9860STS H177988 8 Tooth 30mm Bore $70 9670STS, 9770STS, 9870STS, S670, S680Return Grain Elevator LowerSP130 6620T2 H63578 7 Tooth 1” Bore $70SP131 7720 above S/N 610501, 8820, 8820T2 H108576 8 Tooth 1” Bore $50SP133 7720 to S/N 610501, 7720T2 H99472 7 Tooth 1 ¼” Bore $60SP152 9400, 9500, 9600, 9610, CTS, CTS II, 9650CTS H134603 8 Tooth 1” Hex $50SP151 9650STS, 9750STS, 9660STS, 9760STS, 9860STS H133143 8 Tooth 35mm Bore $65 9770STS, 9870STS, S660, S670, S680, S690

New HollandClean Grain Elevator UpperSP134 TR86, TR87, TR88 784744 9 Tooth 1” Bore $115SP135 TR96, TR97, TR98 773824 9 Tooth 1 1/8” Bore $60SP138 TR89, TR97, TR98, TR99 86512666 9 Tooth 1 3/8” Bore $150SP195 CR940, CR960, CR970, CR8090, CR9080 84437648 11 Tooth 35mm Bore $115 CR9090, CX880, CX8080, CX8090SP250 8060, 8080, TX34, TX64, TX66 80417785 9 Tooth 30mm Bore $80Clean Grain Elevator LowerSP134 TR85, TR86, TR87, TR88 784744 9 Tooth 1” Bore $115SP135 TR85, TR86, TR87 773824 9 Tooth 1 1/8” Bore $60SP138 TR87, TR88, TR89, TR96, TR97, TR98, TR99 86512666 9 Tooth 1 3/8” Bore $150SP195 CR920, CR940, CR960, CR970, CR8090, CR9080 84437648 11 Tooth 35mm Bore $115 CR9090, CX860, CX880, CX8070, CX8080, CX8090 SP250 8040, 8060, 8070, 8080, TX34, TX64, TX66 417785 9 Tooth 30mm Bore $80Return Grain Elevator UpperSP134 TR86, TR87, TR88, TR89, TR95, TR96, TR97, TR98, TR99 784744 9 Tooth 1” Bore $115SP250 8060, 8070, 8080 417785 9 Tooth 30mm Bore $80Return Grain Elevator LowerSP134 TR85, TR86, TR87 784744 9 Tooth 1” Bore $115SP135 TR95, TR96, TR97 773824 9 Tooth 1 1/8” Bore $60SP138 TR88, TR89, TR98, TR99 86512666 9 Tooth 1 3/8” Bore $150SP250 8060, 8070, 8080 417785 9 Tooth 30mm Bore $80

Order No. Model Application Original Number Shaft Size Price Part No. of Teeth

L-5 CA550 Straight Connector $7

L-50 CA550 Offset Connector $8

L-7 CA557 Straight Connector $9

L-70 CA557 Offset Connector $10

L-71 CA557 K39 Connector 2” Hole Centres $14

L-72 CA557 K38 Connector 2¼” Hole Centres $14

L-7B CA557 Straight Connector Bolt/Nut Type $18

L-70B CA557 Offset Connector Bolt/Nut Type $22

AN-83 S52 Straight Connector $7

AN-84 S52 Offset Connector $8

AN-86 CA624 Straight Connector $7

AN-87 CA624 Offset Connector $8

Header Knives 30-50ft


AgcoHKAG36 36ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1250

SKBAG Knifeback only with Holes suits Agco Belt Front (No Knife Sections) ¼” holes, 21/16” hole centres $15 per ft

SKBJS-AG Joining Strap with Bolts and Nuts $38

Case-IHHKCNH35 35ft Knife including 12ft Reinforcing Strap at Drive End - 3050 Case-IH (Single Drive) $1195

HKCNH41 41ft Knife suits Double Knife Drive System includes left side, right side and centre overlap - 3050 Case-IH $1265

HKCNH40 40ft Knife suits Centre Double Drive includes left and right hand side - 3152 3162 $1250

Macdon also sold as Case-IH or New HollandHKMD30 30ft Knife (Single Drive) $995

HKMD30DD 30ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1060

HKMD35 35ft Knife including 12ft Reinforcing Strap at Drive End $1320

HKMD36 36ft Knife including 12ft Reinforcing Strap at Drive End $1350

HKMD39 39ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1450



SKBMD Knifeback only with holes suits Case-IH/Macdon Belt Fronts 21/8 “ hole centres $15 per ft

SKB216 Knifeback only with holes suits Case-IH rigid fronts 21/16” hole centres $15 per ft

SKBJS-MD Joining Strap with Bolts and Nuts $38

Honeybee also sold as New Holland HKHB30 30ft Knife (Single Drive) $995

HKHB30DD 30ft Knife suits Double Knife Drive System includes left side, right side and centre overlap $1160

HKHB30DDSCH 30ft Knife suits Double Drive and SCH Knife Guards, includes left side, right side and centre overlap $1195

HKHB36 36ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1340

HKHB36SCH 36ft Knife suits SCH Knife Guards (Single Drive) $1370



HKHB39 39ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1440



HKH40DDSCH 40FT Knife suits Double Drive and SCH Kife Guards, includes left side, right side and centre overlap $1530



HKHB45DD 45ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1660


SKBHB Knifeback only with holes suits Honeybee/New Holland Belt Fronts $15 per ft

SKBJS-HB Joining Strap with Bolts and Nuts $38


Solid BackboneMade from the same American material as Original Knives, Huge Cost Savings, Backbone Only OR Full Knives with sections attached.

Header Knives 30-50ft


Knifeheads NOT included with Knives - See Page 50

John Deere with 4” Dura-Twin Sections

HKJD30 30ft Knife (Single Drive) $1160

HKJD35 35ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1335

HKJD35DD 35ft Knife suits Double Drive System, includes left side, right side and centre overlap $1370

HKJD36 36ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) $1375

HKJD40DD 40ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1545

HKJD45DD 45ft KNife suits Double Knife Drive System, includes left side, right side and centre overlap $1690

SKBJD Knifeback only with holes suits John Deere Belt Fronts 1” hole centres $15 per ft

SKBJS-JD Joining Strap with Bolts and Nuts 1” Hole centres for 4” Dura-Twin Sections $38

Midwest Fitted with 3” Single ft SCH (Honeybee) Sections

HKMW40DD 3” 40ft Knife suits Double Knife Drive System (includes left side, right side and centre overlap) $1500

HKMW42DD 3” 42ft Knife suits Double Knife Drive System, includes left side, right side and centre overlap $1570



Midwest Fitted with 4” wide double cut John Deere knife sections





SKBHB Knifeback only with holes suits Midwest Belt Fronts with SCH knife sections $15 per ft

SKBJS-HB Joining Strap with Bolt & Nut suits Midwest with SCH knife sections $38

SKBJD Knifeback only with holes suits Midwest with John Deere knife sections 1” hole centres $15 per ft

SKBJS-JD Joining Strap with Bolt & Nut suits Midwest with John Deere knife sections $38

New HollandHKCNH35 35ft Knife including 12ft Reinforcing Strap at Drive End (Single Drive) -760CG $1195

HKCNH41 41ft Knife suits Double Drive System includes left side, right side and centre overlap - 760CG $1265

HKCNH40 40ft Knife suits Centre Double Drive System includes left side and right side - 840CD 880CF $1250

Reinforcing StrapsStrap is 3mm (1/8”) thick stainless steel and utilises existing bolts. Retro fit is easy. No need to change hold down clips.

AGSS Reinforcing Strap suits Agco – 6ft Section $85

MDSS Reinforcing Strap suits CaseIH/Macdon – 6ft Section $85

HBSS Reinforcing Strap suits Honeybee/New Holland – 6ft Section $85

JDSS Reinforcing Strap suits John Deere – 6ft Section $100


Eliminate

almost 100% of

knife breakages.

Fit to first 12ft at

knife drive end.


Header Knives - Rigid Fronts To 30ft

LKBPCE Laminated Knifeback only. Use 2 to form a two metre length (Fits all makes)

Square/Rectangular Holes (Used on 1997 and prior knives) $32 each piece

LKBPCE-1 Round/Oblong Holes (Used on 1998 and later knives) $32 each piece

Order No. Spare Parts Price

Agco/AllisLHKAC2S LHKAC2D Knife with Knife Sections Agco/Allis 24ft $685 –

LHKAC3S – Knife with Knife Sections Agco/Allis 30ft $840 –

Case-IHLHKIH2S LHKIH2D Knife with Knife Sections International 810 22ft 6” $660 $810

LHKIH3S LHKIH3D Knife with Knife Sections International 810 24ft $685 $830

LHKIH4S LHKIH4D Knife with Knife Sections International 810 30ft $840 $1015

LHKCIH2S LHKCIH2D Knife with Knife Sections Case-IH 1010 1020 25ft $695 $860

LHKCIH3S LHKCIH3D Knife with Knife Sections Case-IH 1010 1020 30ft $840 $1015

LHKNH6S LHKNH6D Knife with Knife Sections Case-IH 2010 2020 - Double Drive 30ft $995 $1190

John DeereLHKJD2S LHKJD2D Knife with Knife Sections John Deere ‘200’ 22ft $655 $800

LHKJD3S LHKJD3D Knife with Knife Sections John Deere ‘200’ ‘900’ 24ft $685 $830

LHKJD4S LHKJD4D Knife with Knife Sections John Deere ‘900’ 25ft $695 $860

LHKJD5S LHKJD5D Knife with Knife Sections John Deere ‘200’ ‘900’ 30ft $840 $1015

Massey FergusonLHKMF2S LHKMF2D Knife with Knife Sections Massey Ferguson 24ft $685 $830

LHKMF3S LHKMF3D Knife with Knife Sections Massey Ferguson 30ft $840 $1010

New HollandLHKNH2S LHKNH2D Knife with Knife Sections New Holland 705 22ft $655 $800

LHKNH3S LHKNH3D Knife with Knife Sections New Holland 705 25ft $695 $860

LHKNH4S LHKNH4D Knife with Knife Sections New Holland 806 Double Drive 26ft $865 $1065

LHKNH5S LHKNH5D Knife with Knife Sections New Holland 806 Double Drive 30ft $995 $1190

LHKNH6S LHKNH6D Knife with Knife Sections New Holland 971 71C 73C Double Drive 30ft $995 $1190

Knifeheads Available – Optional – See Page 50

Knives for Claas, Deutz & Laverda are available

Order No. Order No. Model Application & Description Price Price Single Point Double Cut Width Single Point Double Cut

Considerable Cost Saving.

Quick & Easy repair in the Paddock. (no welding required)

Fitted with Long-Life Large or Fine Chrome Serrated Knife Sections

Easily freighted overnight or will fit into a car or ute. Packs into 2 metres (6ft)

Knives – Hay Cutting and Swathers


Case-IHHAYNH2 Case-IH 8350 12ft $400

CNHKNIFE30 Case-IH Swather Knife 30ft $840

Other Case-IH Hay Equipment Knives Quickly Made to Order

HesstonHAYHS1 Hesston Hay Knife 10ft $335

HAYHS2 Hesston Hay Knife 14ft $435

HAYHS4 Hesston Hay Knife 25ft $695

New HollandHAYNH1 New Holland 469, 489 Hay Knife 9ft $300

HAYNH2 New Holland (Single Knife Drive) 495 Hay Knife 12ft $400

HAYNH3 New Holland (Double Knife Drive) 499 Hay Knife 12ft $555




CNHKNIFE 30 New Holland Swather Knife 30ft $840

MacdonMACKNIFE 25 Macdon Swather Knife 25ft $695

MACKNIFE 30 Macdon Swather Knife 30ft $840

VersatileVERKNIFE20 Versatile Swather Knife 20ft $590

VERKNIFE24 Versatile Swather Knife 24ft $695

VERKNIFE28 Versatile Swather Knife 28ft $795

Order No. Model Application Width Price

Large Top Serrated Knife Sections for Cereal Hay

Fine Under Serrated Knife Sections for Swathing of Fine Grasses

Knifeheads available - optional - See Page 50

Fine Top Serrated Knife Sections for Swathing or Fine Grasses

ROT-AFX-66 60 Series - 1460 to 2366 Axceller Kit $2600

ROT-AFX-88 80 Series – 1480 to 2388 Axceller Kit $2600


Case-IH Rotor Auger Conversion

• Improves feeding into rotor and takes away feeder house rumble.

• Easy installation – bolts to existing Rotor with no welding or cutting.

• Unit comes balanced with only minimal static rotor rebalancing required.

• Flighting is 13mm (1/2 inch) thick material.

Knife Sections


Agco/AllisKSSPAC KSSPACF — Agco/Allis L, N & R Series Rigid Fronts $3 $3 - KSSPACBF — Agco Belt Front 21/16” Centres (Some have MF Fronts and need 2” Centres) - $3 -

ClaasKSSPCL KSSPCLF KSDCCL Claas $3 $3 $4

HoneybeeKSSPHB KSSPHBF KSDCHB Honeybee and New Holland Belt Fronts $3 $3 $4.75KSSPHBM — — Honeybee and New Holland Belt Fronts SCH Original Sections $3.20 - -KSSPHBCS — — Knife Section suits centre overlap with 2 Torx Screws and Nuts $7.50 - -

Case-IHKSSPIH KSSPIHF KSDCIH International 810 Front $3 $3 $4.75KSSPCNH KSSPCNHF KSDCCNHF Case-IH 1010 1020 2010 Fronts, Mower Conditioners, Swathers $3 $3 $4.75 KSUSCNH Case-IH Mower Conditioner & Swathers - Underserrated $3KSSPMAC KSSPMACF — Macdon Belt Fronts sold by Case-IH $3 $3 -KSSPCIH KSSPCIHF — Case-IH 3050 Rigid Fronts, 3152 3162 Draper Fronts $3 $3 -

John DeereKSSPJDNH KSSPJDNHF KSDCCNHF John Deere 200 and 900 rigid series Fronts $3 $3 $4.75 KSDCJDA John Deere Draper Fronts 4” wide Double Cut Fine - - $5 KSDCJDB John Deere Draper Fronts 4” wide Double Cut Coarse - - $5 KSDCJDAB 4” Wide Double Cut Fine Countersunk Underneath - - $8 KSDCJDACS 4” Wide Double Cut Fine Countersunk Top - - $8

MacdonKSSPMAC KSSPMACF — Macdon Belt Fronts, Macdon Swathers $3 $3 - KSUSMAC Macdon Swathers - Underserrated $3KSSPMACLH — Left Hand 1/2 section - fits nearly all models - - $3 KSSPMACRH — Right Hand 1/2 section - fits nearly all models - - $3KSSPMACCSC KSSPMACCSF With Countersunk Holes for Centre Overlap (Specify Top or Bottom) $5 $5 - KSSPMACWS Centre Overlap Wear Strip - $10 -

Massey FergusonKSSPMF KSSPMFF KSDCMF Massey Ferguson Rigid and some Draper Fronts - 2” Centres $3 $3 $4.75

MidwestKSSPHB KSSPHBF — Midwest Draper Fronts $3 $3 -KSSPHBM — — SCH original Knife Sections Medium Serrations $3.20 - -

New HollandKSSPCNH KSSPCNHF KSDCCNHF New Holland 971 71C 72C and 73C $3 $3 $4.75 New Holland, Hesston, Case-IH Mower Conditioners and Case-IH SwathersKSSPJDNH KSSPJDNHF KSDCCNHF New Holland 705 and 806 Series Fronts $3 $3 $4.75KSSPCIH KSSPCIHF — New Holland 760CG Rigid Fronts, 840CD 840CF Draper Fronts $3 $3 -

Versatile KSSPVER — Versatile Swathers - $3 -

Comb Front Machines— KSCF KSDCCF Comb Front Machines IH, MF & NH - $4.50 $5.50

End SectionsKSSPLHEND — Left Hand 11/2 Section – fits nearly all models - - $11KSSPRHEND — Right Hand 11/2 Section – fits nearly all models - - $11— KSSPCIHT Section for centre overlap 740CF Front - $12 -

Order No.’s Model Application Coarse Fine Fine Coarse Fine Fine Serrated Serrated Serrated Serrated Serrated Serrated Single Single Double Single Single Double Point Point Cut Point Point Cut

NEW

NEW

Knife Sections Fixings & Accessories


Versatile Swather -BOLTS& NUTS

Order No. Price

KSBNVER16 5/8” (16mm) 85¢ ea

KSBNVER25 1” (25mm) $1 ea

Order No. Price

KSBNNHCTR 80¢ ea

New Holland and Macdon Centre Overlap Bolt and NutPRICE

INCLUDES NUT

Cuphead Knife Section Bolts & Nuts

Suits Laminated Knife1997 and earlier

Tension 80-90 INCH Pounds

Order No. Price

KSBNCH16 For attachment of knife section 5/8” (16mm) 50¢ ea

KSBNCH25 For attachment of knifehead 1” (25mm) 60¢ ea

KSBNCH32 For attachment of knifehead 1¼” (32mm) 75¢ ea

PRICE INCLUDES

NUT

Rivets – Open Front

KSOFRIVT 5.2 x 15mm Suits Open Front $13 per 100 knife sections

KSOFHDR3 5.2 x 32mm Suits Open Front knifehead 24¢ each KSOFRICL 6 x 18mm Suits Claas late models $15 per 100 KSOFRICL2 6 x 30mm Head Rivets suits Claas 30¢ each

PriceOrder No.

Rivets – Comb Front Suits 2” Single Point Sections

KSCFRIVT 13mm x 4.7mm for MF & NH $7 per 100

KSCFRIVS 9mm x 4.7mm for International $7 per 100

Suits Double Cut Sections

KSCFRIV1 11mm x 5.2mm $10 per 100

KSCFRIV2 12mm x 5.2mm $10 per 100

Head Rivet – Double Cut Sections

KSCFHD16 16mm x 5.2mm $4 per 25

KSCFHD18 18mm x 5.2mm $4 per 25

Order No. Price

Knife Guard ShimsSHIM-1 Knife Guard Shim 1mm thick $1.40 ea

SHIM-2 Knife Guard Shim 2mm thick $1.50 ea

SHIM-3 Knife Guard Shim 3mm thick $1.60 ea

Order No. Price

Nut Inserts10937 6mm Nut Insert Suit Overlap $1.50 ea

10941 6mm Nut Insert Suit Knifehead $1.50 ea

Order No. Price

Knife Guard Bolts & Nuts

High tensile bolts with high tensile locking wizz nuts

– Zinc PlatedPRICE INCLUDES NUT

Order Order Length No. 3/8” Price No. 7/16” Price

1” KGBN25mm $1 KGBN25M1 $1.30

1¼” KGBN32mm $1 KGBN32M1 $1.30

1½” KGBN38mm $1.10 KGBN38M1 $1.40

1¾” KGBN45mm $1.35 KGBN45M1 $2

2” KGBN50mm $1.50 KGBN50M1 $1.85

2½” KGBN64mm $1.75 KGBN64M1 $2.103/8” Wizz Nut KGNUT38 35¢ – –7/16” Wizz Nut – – KGNUT716 50¢

Splined Knife Section Bolts & Nuts

Order No. Price

KSBNSP16 For attachment of knife section 5/8” (16mm) 50¢ ea

KSBNSP25 For attachment of knifehead 1” (25mm) 55¢ ea

KSBNSP32 For attachment of knifehead 1¼” (32mm) 75¢ ea

KSNUT Suits above 3 items 25¢ ea

KSBNSP16-14 ¼” Diameter – suits Agco 5/8” (16mm) 65¢ ea

PRICE INCLUDES

NUT

Suits Nearly all older Rigid Fronts and Macdon and Case-IH Draper Fronts

John Deere Draper Front Bolts & Nuts

PRICE INCLUDES

NUT

Order No. PriceKSBNJD16 For attachment of knife section 5/8” (16mm) 65¢ eaKSBNJD25 For attachment of knifehead & joiner strip 1” (25mm) $1 eaKSCN6 Lock nut suits reinforcing strip 20¢ ea

KSFNM6 M6 Flange Nut 20¢ eaKSBNJDHX Allen Key Screw & Nut suits overlap $1.00 ea

Agco Bolts & NutsSuits Agco Belt Fronts

PRICE INCLUDES

NUT

Order No. PriceKSBNSP16-14 ¼” Diameter 5/8” (16mm) 65¢ ea

KSBNHX32 ¼” Diameter 1¼” (32mm) $1.20 ea

Honeybee & Midwest Bolts & NutsSuits Honeybee, New Holland & Midwest Belt Fronts6mm diameter

Order No. PriceKSBNHB16 For attachment of knife section (16mm) 90¢ ea

KSBNHB32 For attachment of knife head (32mm) $1.00 ea

KSCN6 Lock nut suits reinforcing strip 20¢ ea

KSFNM6 M6 Flange Nut 20¢ ea

KSBNHBT20 T20 Torx Screw & Nut suits Overlap - Honeybee $1 ea

KSBNMW16 M6 Cap Screw suits Overlap - Midwest $1 ea

PRICE INCLUDES

NUT

Knifeheads – Hay and Harvest


Agco/AllisLKHAC N Series 1 & 2 Left Side & L2 L3 $90

LKHACN3 N Series 3 prior S/N 19301 $300bearing included

LKHACR

Late N & R Models – No bearing needed $185Original Part: 71351990

Case-IH

LKH297 1010 1020 - complete with block $325Replaces 1316161C95

LKH297B

1010 1020 - Block Only $175

LKHNH971 2010 2020 $240

LKHC-IH 810 Series Fronts $220bearing included

LKHBRG1

Bearing Only $60 ea Suits International 810 Front Allis N Series

LKHHS1 416 16ft Mower Conditioner $220

Hesston

LKHHS1 1170 8400 $220

Honeybee and New Holland Belt Front

14226 Honeybee or New Holland - Left Hand $300 with SCH GuardsOriginal Part: HB67889 86561690

14227 Honeybee or New Holland - Right Hand $300 with SCH GuardsOriginal Part: HB67890 86561826

81364 Knifehead Left Hand - $300 Honeybee/New Holland with Crary/Harvestaire 7228 Guards (No Choke)

81365 Knifehead Right Hand - $300 Honeybee/New Holland with Crary/Harvestaire 7228 Guards (No Choke)

12543

Nylon Ring $15Suits knifehead

John Deere

LKHJD 200 Series 900 Series Rigid Fronts $260 Heavy Duty Version Original Part: AH89498

LKHJD600D 600 Series Belt Front Left and Right Original Part: AH231841 $270

LKHJD900D 900 Series Belt Front $250AH220050 AH166965 AH215258

Massey Ferguson

LKHMF 550 750 760 850 860 head $170 with bearing not including strap

LKHMFS 750 760 13 to 24ft head $300 with bearing and strap included

LKHMF1 850 860 22 to 30ft head $300 with bearing and strap included

MacdonLKHMAC Macdon 960 962 973 - 25’ 30’ & 36’ $250

& Case-IH 1040 1042 2052 Fronts Original Part 37835

LKHMAC1 Macdon 972 CaseIH 1052 $270Original Part 113688

LKHMAC5L Macdon D60 5º Tilt Left Hand $270

LKHMAC5R Macdon D60 5º Tilt Right Hand $270

LKHMAC83 Macdon D60 New Holland 83C $245

LKHPIN1 Pin, Bearing and Seal $100suits Macdon 960 962 972 973 D60 1040 1042 1052

LKHBRG2 Bearing suits Macdon Knifehead $45

LKHSEAL1 Seal suits Macdon Knifehead $8

Mid WestMWKHLH3 Knifehead Left Hand – $360

Suit 3’” Single Pt Knife Sections

MWKHRH3 Knifehead Right Hand – $360Suit 3” Single Pt Knife Sections

MWKHLH4 Knifehead Left Hand – $360Suit 4” Doublecut Knife Sections

MWKHRH4 Knifehead Right Hand – $360Suit 4” Doublecut Knife Sections

New HollandLKHNHTR 705 960 Front 22ft & 25ft $200

complete head

LKHNH971 971 973 71C 73C $240 including Bearing Original Part: 848094

LKHNHM469 469 Hay Bine including Bush $160 Original Part: 219986

LKHNHM469 A 469 Hay Bine including Bush $175 long bar partway up side of bush

LKHNHM489 489 Hay Bine including Bush $225 Original Part: 80289488

LKHNH469B Bush suits 469 Knifehead $70 Original Part: 134182

Order No. Description Price Order No. Description Price

Knifeheads – Hay and Harvest


New Holland continuedLKHNH489B Bearing $105

suits 489 Knifehead and 971 KnifeheadOriginal Part: 701401

LKHNHM495 495 Hay Bine including Bush $185

LKHNHM499L 499 Hay Bine Left Hand Knife $140 including Bush

Hold Down Clips - General

LHAHDCLP Std Hold Down Clip $5 Standard hold down clip for general use

LHAHDCV Versatile Swathers only $8

LEHAHDCL Extra High Hold Down Clip $8 for use at knife drive end

Hold Down Clips - New Holland

LHNH4577 Hold Down Clip $15 Suits New Holland 840CD - Belt Front

LHNH0787 Plate Adjuster $12 Suits LHNH4577 - On New Holland 840CD Belt Front

LHNH2342

Bolt & Nut $2.80 Suits LHNH2134 4577 On New Holland 840CD Belt Front

LHNH2134

Hold Down Clip - High Arch $16Suits New Holland 840CD - Centre (use 3 per front)

LHNH2992 Plate Adjuster $18 Suits LHNH2134 On New Holland 840CD Belt Front

KSWEARST Wear Strip with Hardened Edge $6 Suits older John Deere New Holland Rigid Fronts

Hold Down Clips - Honeybee Belt Fronts

LHAHDCS1 Hold Down Clip - Spring loaded $25Suits 3/8” bolts

LHAHDCS2 Hold Down Clip - Spring loaded $25Suits 7/16” bolts

LHAHDA Arm Only $9Suits Spring loaded hold down clip

LHAHDP Front Wear Pad $2.75Suits Spring loaded hold down clip

LHAHDPR Rear Wear Pad $2.50Suits Spring loaded hold down clip

LHAHHBR Hold Down Roller 15768 $37Suits Honeybee with SCH knife guards Bottom Roller

LHAHHBRT Hold Down Roller 16330 $37Suits Honeybee with SCH knife guardsTop Roller

LHAHHBRO Hold Down Roller 16004 $68Suits Honeybee with SCH knife guards Centre Overlap Roller

Hold Down Clips - John Deere

HPJD-6928

NEW

Hold Down Clip $42Suits JD 630D 640D 640FD 645FD - Centre Overlap of Knives Original Part: AH226928

HPJD-8547

NEW

Hold Down Clip $16Suits 900 Series Draper Fronts 600 Series Draper Fronts 600 Rigid Fronts (Non-Draper) Original Part: AH218547

HPJD-8548

NEW

Hold Down Clip $16Suits 900 Series Draper Fronts 600 Series Draper Fronts 600 Rigid Fronts (Non-Draper) Original Part: AH218548





LKHNHM499R Hay Bine Right Hand Knife $140including Bush

VersatileLKHVER Suits Versatile Swather $100

including Bushing

LKHVERB Bush suits Versatile Knifehead $40 OEM: SW1740

Idler Pulleys


DonDye pressed steel pulleys and idlers are renowned for their quality and are used by many original equipment manufacturers. Fitted with the highest quality pre-lubricated ball bearings

– no maintenance is required. Adaptor bushes available to suit different bolt sizes. Made to take 1/2”, 5/8” or 3/4” Bolt for centre mount.

PTO Shafts, Yokes and Adaptors

Order No Diameter Belt Width Price

ABFI-54 33/8” – 85mm ¾” – 19mm $41

ABFI-64 4” – 102mm ¾” – 19mm $45

ABFI-76 4¾” – 121mm ¾” – 19mm $50

ABFI-100 6¼” – 158mm ¾” – 19mm $55

ABFI-108 6¾” – 171mm ¾” – 19mm $60

A32FT-144 9”– 230mm 2”– 50mm $75


BCFI-76 4¾” – 121mm 1” – 25.4mm $45

BCFI-92 5¾” – 146mm 1” – 25.4mm $48

BCFI-100 6¼” – 158mm 1” – 25.4mm $55

BCFI-108 6¾” – 171mm 1” – 25.4mm $58

BCFI-124 7¾” – 197mm 1” – 25.4mm $65

BCFI-140 8¾” – 222mm 1” – 25.4mm $70


DFI-144 9” – 230mm 1½” – 38mm $70

DFI-176 11” – 280mm 1½” – 38mm $90


26FI-64 4”– 100mm 1½”– 40mm $44

26FI-92 5¾” – 146mm 15/8” – 41.4mm $65

26FI-108 6¾” – 171mm 15/8” – 41.4mm $70


32FI-92 5¾” – 146mm 2” – 50.8mm $76

32FI-144 9” – 228mm 2” – 50.8mm $145

PTOYOKE1 11/8” Hex Bore Yoke Quick Release $145221 Series – small type Drive from Feeder House to Front CaseIH 1010 Front

PTOYOKE2 11/8” Hex Bore Yoke Clamp Type $170 221 Series – small type Drive from Feeder House to Front CaseIH 1010 Front

PTOYOKE5 11/8” Hex Bore Yoke Quick Release $75421 Series – large type

PTOYOKE6 11/8” Hex Bore Yoke Clamp Type $170421 Series – large type

LANxB540 Adapter $190 13/8” 6 Spline Male to 11/8” Hex Female


BVI-70 2¾” – 70mm V-Idler B Section $45

BVI-100 4” – 160mm V-Idler B Section $65

BVI-80 5” – 127mm V-Idler B Section $75

BVI-108 6¾” – 171mm V-Idler B Section $85


CVI-84 5¼” – 133mm V-Idler C Section $65

CVI-100 6¼” - 160mm V-Idler C Section $70

CVI-117 7¼” – 185mm V-Idler C Section $75

CVI-144 9” – 230 V-Idler C Section $90


208032080 5” - 127mm 2” - 53mm $73

209632108 6¾” – 171mm 2” – 50.8mm $80


212824144 9” – 228mm 1½” – 38.1mm $90

212832144 9” – 228mm 2” – 50.8mm $100

212842160 10” – 254mm 25/8” – 66.6mm $115

212852160 10” – 254mm 3¼” – 82.5mm $125

Order No Belt Width Bore Price

FN108 Bush ½” $9

FN110 Bush 5/8” $9

FN112 Bush ¾” $9

LANxB1340 Adpater $195 13/8” 21 Spline Male to 11/8” Hex Female

LAN1261800 Adapter $120 11/8” Hex Coupler 115mm long

PTOSH1 1.0 metre Closed Length $390 PTO Drive Shaft - 35HP rating

2 x 11/8” Hex Bore Quick Release Yokes 421 Series

PTOSH2 1.0 metre Closed Length $460 PTO Drive Shaft - 21HP rating 2 x 11/8” Hex Bore Quick Release Yokes 221 Series Case-IH 1010 Fronts

Many other shafts available – please enquire – fitted with 6, 20 or 21 spline yokes, round bore yokes

or 11/8” Hex Yokes

Hydraulic Multi-Coupler


John Deere

Agco and Massey FergusonSome of the components on this page fit Agco R65 R75, Massey Ferguson 9690 9790 9895, Challenger 650 670 680B

Please call for details

Use the Hydraulic Multi-Coupler to make Canola Pick Up Fronts easy to attach.

LAN3PLK-0-5AFC Hydraulic Coupler Block - Harvester Side $2000 Suits John Deere 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS S660 S670 S680 S690

LAN166991 Multi Coupler Block - Header Front Side $1075

All Couplers Fitted

Suits Reel Fore & Aft, Reel Drive, Reel Lift John Deere 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS S660 S670 S680 S690

LAN166990 Multi Coupler Block - Header Front Side $325 No Couplers

Suits John Deere 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS S660 S670 S680 S690

Or choose LAN166990 Block and any of the following couplers...

LAN166915 3/8” Coupler - Suits Reel Fore & Aft $180

(2 Required) 11/16“ ORFS Thread Light or Dark Blue Marker (Snap Ring included)

LAN166916 1/2” Coupler - Suits Reel Drive (Pressure) $180 Yellow Marker (Snap Ring included)

LAN166917 1/2” Coupler - Suits Reel Drive (Return) $180 Red Marker (Snap Ring included)

LAN166918 1/2” Coupler - Suits Reel Lift $180 Green Marker (Snap Ring included) 11/16“ ORFS thread

LAN204828S Storage Bracket $120for Multi-Coupler Block (Hardware included)

LAN166988 Coupler Seal Repair Kit $28

Suits 3/8“ Coupler - Header Front Side

LAN166987 Coupler Seal Repair Kit $28Suits 1/2“ Coupler - Header Front Side

LANEC550 Dummy Plug - Header Front Side $92Suits John Deere 50 Series - STS Required to complete circuit on Reel Speed

LANEC560 Dummy Plug - Header Front Side $235Includes Snap Ring Suits John Deere 60 and 70 Series - STS, S660 S670 S680 S690 Required to complete circuit on Reel Speed

LANAH225671 Large Valve - Suits Coupler Block - Harvester Side $395 (3 per block) ½”

Replaces John Deere AH225671

LANAxE21789 Small Valve - Suits Coupler Block - Harvester Side $340 (2 per block) 3/8”

Replaces John Deere AXE21789

LANAH201808 Tool $100For previous two valves required to remove and replace

Case-IH and New Holland

LAN3P5065-5EMC Hydraulic Coupler Block - Harvester Side $690

Suits Harvester side of Case-IH 8010 onwards, New Holland CR & CX Series

LAN2P5065-2AFC Hydraulic Coupler Block - 2 Port $525Header Front SideSuits Header Front Side Case-IH 8010 onwards, New Holland CR & CX SeriesHas ½” large ports suitable for oil flow on Canola Pick Ups

LAN2P5065-5AFC Hydraulic Coupler Block - 5 Port $650Header Front SideSuits Header Front Side Case-IH 8010 onwards, New Holland CR & CX SeriesHas 2 large ports and 3 small ports

LAN166988 Coupler Seal Repair Kit $28Suits 3/8“ Coupler - Header Front Side and Harvester Side

LAN166987 Coupler Seal Repair Kit $28Suits 1/2“ Coupler - Header Front Side and Harvester Side

LAN5046 ½“ Valve suits Header Front $80Replaces Original 84435046

LAN5047 3/8“ Valve suits Header Front $80Side. Replaces Original 84435047

LAN5502 ½“ Valve Long suits Harvester Side $140Replaces Original 84435502

LAN5503 ½“ Valve Short suits Harvester Side $70Replaces Original 84435503

SCH Knife Drives

• For Swather or Header Conversions• Belt or Hydraulic Drive• Top Quality – German Manufacture

True straight line drive from the planetary gear drive system.

This system is in rotation all the time. There are no dead spots

like wobble or crank drives where arms or levers have to stop

twice per revolution to change direction.

12462

SCH Pro-Drive $3250Vertical Pulley Type (Pulley not included)

12780 Pulley to suit Vertical Pro-Drive $220200mm diameter

12785 Pulley to suit Vertical Pro-Drive $220220mm diameter

12788

Pulley to suit Vertical Pro-Drive $230230mm diameter

12802

Pulley to suit Vertical Pro-Drive $245240mm diameter

12466

SCH Pro-drive $2725 Hydraulic or Horizontal Pulley Type (Not including Motor or Pulley)

12568

Adjustable Pulley $300 Suits Horizontal Pro-Drive 12466

12573

Fixed Adaptor $200Suits Pro-Drive Hydraulic drive 1” Bore

12563

Fixed Adaptor $225Suits Pro-Drive Hydraulic drive 1¼”

HMOMP100 Hydraulic Motor $700With 1” Drive shaft - suits Pro-Drive & fixed adaptor 12573 100cc/RPM

HMOMS100 Hydraulic Motor $1250With 1¼” Driveshaft suits Pro-Drive & fixed adaptor 12563 100cc/RPM as used on Honeybee/New Holland

12585 Hydraulic Motor Mount Kit $285Honeybee/New Holland and Univeral

83625 Universal Mount Plate $100Basic Plate – Requires adaption

11236

Clamp Ring $80For Knifehead

11238 Knifehead Bar $90(Drilled as required)

12543

Nylon Ring $12Knifehead

10259

Knifehead Bearing with Plate $140

12766

Bottom Drive Bearing Assembly $295With Nylon Ring and Claw Midwest and Honeybee

19373

Bottom Drive Bearing Assembly $295JD ‘900’ Draper up to S/N 710101

Original Part: DE19373 AH160993 DE19786

19294

Bottom Drive Bearing Assembly $255JD ‘900’ Draper above S/N 710101 and all ‘600’ JD Draper

Original Part: DE19294

For Knifeheads compatabile with SCH Drives see Page 50


Canola Vertical Knife

SCH Knife Drives

ZRT135-HY-R Vertical Canola Knife Right Hand $1800

ZRT135-HY-L Vertical Canola Knife Left Hand $1800

SABREVKFLOW Flow Control Valve suits Knife $325

Code Description Price

Top Quality European Production

Hydraulic Drive Unit – Fits to any Swather or Harvester Front

A clean vertical cut in your Canola will reduce losses, prevent radish wrapping and let you maximise the yield of this valuable crop.

The unit normally drives from the Return Line of the Hydraulic Reel Drive, or if fitted to a PTO Swather – then directly off the Tractor Hydraulics.

We have a simple kit with a flow control valve and associated hoses if required.

FEATURES: • Mechanical Simplicity • High Torque Hydraulic Motor• Easy Height Adjustment • No Greasing Required

Parts & Accessories are still available for Sabre Knives

PROFIX

10083

Grooved Nut $1438mm Outside Diameter

10084

Grooved Nut $1844mm Outside Diameter

10234

Grooved Nut Complete $3846mm Outside Diameter

10277

Ball Bearing $19580mm Outside Diameter

10280


10279


12757 Crankshaft Bottom Half $80 Centre fixing is 2 Bolt

14221 Crankshaft Bottom Half $160 Centre fixing is 1 Bolt

10284

Plug $12

10286

Plug $50

10282

Needle Sleeve $56 32mm Outside Diameter

10289

Grooved Ball Bearing $170140mm Outside Diameter

12541

Cover $36

12629 Shaft $127211mm length

12630 Shaft $127195mm length

12748

Bevel Gear - Set of 2 $4601 is 18 teeth 1 is 20 teeth


Retractable Fingers

Allis AgcoMW20326 Retractable Finger Guide Inner Plate $15

Suits Allis Agco Open Fronts

Original Part: 71320326

MW20327 Retractable Finger Guide Outer Plate $15Suits Allis Agco Open Fronts


MW20323 Retractable Finger Guide – Nylon $12Suits Allis Agco Open Fronts


Case-IHHPJD-869 Retractable Finger Guide $4

Suits 810 Front

HPIHC-1883 Retractable Finger Guide $7Suits 1010 1020 1042 1052 2010 2020 2052 2062Original Part: 87620690 1307259C2

HPIHC-1884 Retractable Finger $12Suits 1010 1020 FrontsOriginal Part: 1320699C1 434295A2

HPIHC-1885 Finger Holder $8Suits 1010 1020 1015 P/Up 1042 1052 2052 2152Original Part: 1308425C1

HPIHC-0719 Finger Holder - Split $10Suits 1010 1020 1015 P/Up 1042 1052 2052 2152Original Part: 1308425C1 410719A1

Belt FrontsHPIHC-1883 Retractable Finger Guide $7

Suits 1042 1052 2052 2062 2152 Original Part: 87620690 1307259C2

HPMD-3029 Retractable Finger - 12” Drum (210mm long) $22To suit 12” Drum Suits CIH 1042 1052 2052 Original Part: 123029

HPMD-3245 Retractable Finger 11” Drum (197mm long) $22 To Suit 11” Drum Suits CIH 1042 1052 2052 Original Part: 123245

John Deere

Old European FrontsHPJD-869 Retractable Finger Guide $4

Suits 955 975 630Original Part: Z30752

HPJD-868 Steel Retractable Finger $11Suits 955 975 630Original Part: Z26570

HPJD-870 Retractable Finger Holder $13Suits 955 975 630Original Part: AZ20696

900 Series Belt Front 200 & 900 Series Rigid Fronts

HPJD-1716

Retractable Finger Guide Kit $8inc Plastic Guide, Tin Plate & 2 Torx ScrewsSuits all 200 & 900 Series Rigid Fronts 925 930 936 Draper FrontsOriginal Part: H86918 H87044 H87192

HPJD-1716-G Guide – Only $2Suits all 200 & 900 Series Rigid Fronts 925 930 936 Draper FrontsOriginal Part: H87044

HPJD-926 Retractable Finger – Steel $10Suits all 200 & 900 Series Rigid Fronts Original Part: H162662

HPJD-927 Retractable Finger Holder $12Suits all 200 & 900 Series Rigid Fronts 925 930 936 Draper FrontsOriginal Part: AH171884 AH107066 AH164128 AH87944

HPJD-927-JD Retractable Finger Holder $20Suits all 200 & 900 Series Rigid Fronts 925 930 936 Draper Fronts

Genuine JD

Original Part: AH171884 AH107066 AH164128 AH87944

HPJD-8042 Retractable Finger - 200mm long $13Suits 925D 930D 936DOriginal Part: H158042

HPJD-8002 Retainer $8Suits 925D 930D 936DOriginal Part: H178002

615 Canola Pick Up 640xHPJD-8206 Retractable Finger Guide $7

Suits 615 Pickup 640XOriginal Part: H168206

HPJD-1602 Retractable Finger Holder $15Suits 615 Pickup 640XOriginal Part: AH171602

HPJD-9914 Retractable Finger - 280mm long $15Suits 615 Pickup 640XOriginal Part: H169914

HPJD-2459 Retainer $5Suits 615 Pickup 640XOriginal Part: H172459

HPJD-9913 Spring Locking Pin (R Clip-Large) $3Suits 615 Pickup 640XOriginal Part: H169913

HPJD-8316 Spring Locking Pin (R Clip-Small) $2Suits 615 Pickup 640XOriginal Part: 28316

HPJD-9912 Retainer $8Suits 615 Pickup 640XOriginal Part: H169912

600 Series Fronts 635D 640D 630R 635RHPJD-7264 Outer Guide Retainer $4

Suits along length of Drum (Qty 18) 635D 640DOriginal Part: H217264

HPJD-7265 Inner Guide Retainer $4Suits along length of Drum (Qty 18) 635D 640DOriginal Part: H217265

HPJD-7266 Guide Ball - Plastic $3Suits along length of Drum and tapered ends of Drum 635D 640DOriginal Part: H217266

HPJD-1602 Retractable Finger Holder $15Suits 635D 640D 630R 635R PickupOriginal Part: AH171602

HPJD-8229 Retractable Finger 270mm long $15Suits along length of 16” Drum (635D 640D 630R 635R) and if above S/N 785000 suits tapered ends of Drum 635D 640DOriginal Part: AH228229


Retractable Fingers

HPJD-1246 Retractable Finger Kit 243mm long $42Suits 14” Drum 635DOriginal Part: AXE21246

HPJD-0784 Retractable Finger Kit 215mm long $36Suits taper on end of 16” Drum 635D 640DOriginal Part: AXE40784

HPJD-8206 Retractable Finger Guide $7Suits 615 PickupOriginal Part: H168206

HPJD-0498 Inner Guide Retainer $10Suits tapered ends of Drum (Qty 2) 635D 640D excluding Advanced model with 14” DrumOriginal Part: HXE60498

HPJD-60497 Outer Guide Retainer $10Suits tapered ends of Drum (Qty 2) 635D 640D excluding Advanced model with 14” DrumOriginal Part: HXE60497

HPJD-7266 Guide Ball - Plastic $3Suits along length of Drum and tapered ends of Drum 635D 640DOriginal Part: H217266

HPJD-2459 Retainer $5Suits 635D 640D 630R 635ROriginal Part: H172459

HPJD-9913 Spring Locking Pin (R Clip-Large) $3Suits 635D 640D 630R 635ROriginal Part: H169913

HPJD-8316 Spring Locking Pin (R Clip-Small) $2Suits 635D 640D 630R 635ROriginal Part: 28316

HPJD-9912 Retainer $8Suits 635D 640D 630R 635ROriginal Part: H169912

HPJD-7899 Retainer $60Suits fingers on tapered end only 635D 640D excluding Advanced model with 14” DrumOriginal Part: HXE67899

HPJD-8570 Retainer $17Suits fingers on tapered end only 635D 640D excluding Advanced model with 14” DrumOriginal Part: HXE68570

New Holland

705 FrontsHPJD-869 Retractable Finger Guide $4

Suits TR70 TR85 8040 8060 8080Original Part: 762687

HPNH-1415 Top & Bottom Plates with Bolts & Ball $16Suits 1540 1545 1550 TR70 TR85 8040 8060 8080Original Part: 80324799 324799

HPNH-878 Retractable Finger $8Suits 1540 1545 1550 TR70 TR85 (705 Fronts)Original Part: 80334972 334972

HPNH-879 Retractable Finger Holder $8Suits 1540 1545 1550Original Part: 80320816

806 971 972 973 73C FrontsHPNH-1002 Retractable Finger Guide $12

Suits 806 971 972 973 FrontsOriginal Part: 288799

HPNH-919 Retractable Finger $12Suits 806 971 972 973 Fronts 71C 72C 73COriginal Part: 86537392 80732640 699569 782190

HPNH-1755 Retractable Finger Holder $12Suits 806 971 972 973 Fronts 71C 72C 73COriginal Part: 80467990 80782189

Macdon Draper FrontHPIHC-1883 Retractable Finger Guide $7

Suits Macdon 960 962 972 973 Original Part: 123054

HPMD-3029 Retractable Finger – 12” Drum $22Suits Macdon 962 972 973 D60 To suit 12” Drum Original Part: 123029

HPMD-3245 Retractable Finger 11” Drum $22 To Suit 11” Drum Suits Macdon 962 972 973 D60 Original Part: 123245

HPIHC-1885 Retractable Finger Holder $10Suits Macdon 962 972 973 D60 Original Part: 123055

Mid West Draper FrontMW20326 Retractable Finger Guide Inner Plate $15

Midwest Belt Fronts

MW20327 Retractable Finger Guide Outer Plate $15Midwest Belt Fronts

MW20323 Retractable Finger Guide – Nylon $12Midwest Belt Fronts

MWRF34ZP

Retractable Finger $34Midwest Fronts - 260mm

HPJD-927-JD Retractable Finger Holder $20Midwest Belt Fronts

Genuine JD

Recommended because of higher shaft speed

Honeybee Draper FrontHPJD-869 Retractable Finger Guide $4

Suits Honeybee & New Holland Belt FrontsOriginal Part: 86578659 86578658 86564938

HPJD-1716 Retractable Finger Guide Kit $8including Plastic Guide, Tin Plate & 2 Torx ScrewsSuits Honeybee & New Holland Belt FrontsOriginal Part: 86578659 86578659 86564938

HPJD-1716G Guide Only $2Suits Honeybee & New Holland Belt Fronts

HPJD-926 Retractable Finger – Steel $10Suits Honeybee & New Holland Belt FrontsOriginal Part: 86642897

HPJD-927-JD Retractable Finger – Holder $20Suits Honeybee & New Holland Belt FrontsOriginal Part: 86564937 HB73324

Genuine JD

Recommended because of higher shaft speed



Retractable Fingers

Lentil Lifter

Header Reel Bats

HRB18422 7¼” x 22ft John Deere 200 & 900 fronts $1025

HRB18424 7¼” x 24ft New Holland 971, 71C, 73C fronts $1150

HRB18425 7¼” x 25ft Case-IH 1010 & 1020 fronts $1190

HRB18430 7¼” x 30ft IH810 Fronts $1380

John Deere 200 & 900 fronts

Case-IH 1010 & 1020 fronts

HRB18418 7¼” x 18ft Case-IH & Macdon Belt Fronts $815

1040, 1042, 36ft, 2 sets required

Order No. Size Model Application Price (Set of 5) Per Set

Individual Bats Available

Made From Galvanised Steel. Full Length – One Piece Makes The Reel More Stable

Take the Rattle Out of Your Reel

184 mm (71/4")

280 mm (9")

280 mm (11")

150 mm (6")

2-3mm

John Deere, Case-IH 1010, New Holland, Macdon

184 mm (71/4")

280 mm (9")

280 mm (11")

150 mm (6")

2-3mm

n Bolts clamp Reel Bat and Tension it up because edges are made lower than pan section. Eliminates Rattle & Vibration which cause fractures.


CL1610 All makes and models includes bracket $32

Adjustable Lentil Lifter

Massey Ferguson

HPMF-891 Retractable Finger $13Suits 510 750 760

Original Part: 238797M2

HPMF-1717 Retractable Finger Holder $30Suits 510 750 850 760 860


HPJD-869 Retractable Finger Guide $4Replaces Ball & Plate System on 510 750 850 760 860

Retract 2 Guide & Attaching Screws $4All C-IH 1010 1020 Fronts

Retract 2F Finger only – All C-IH 1010 1020 $132010 2020 Fronts

Retract 3 Guide & Attaching Screws suits NH 971 Front $4

Retract 3F Poly Finger suits NH 971 Front $13

• Replace Steel Retractable Fingers • Strong & Durable • Made from tough fibreglass with outer coating of hardwearing plastic • Will not damage your concave, drumbars or other parts of the header like steel fingers.

Retract 1 Guide & Torx Screws $5Suits 200 & 900 John Deere Rigid Fronts

Retract 1F Poly Finger only $14Suits 200 & 900 John Deere Rigid Front

Poly Retractable Fingers (Insurance Against Serious Damage)

Croplifters


Shoe section made from high-grade

spring steel

Height & length adjuster. Also allows some side movement

We recommend one croplifter per foot across the front.

Fits all Open and Belt Fronts for CanolaField Peas & Downed Crops

Standard Heavy Duty

Order No. Order No. Model Application Description Price Standard Heavy Duty

Agco/Allis CROPLIFD 1 CROPLIFD1HD L & N & R Series – Rigid Fronts Deluxe Croplifter with saddle (60mm high) $45 $49

and 2” x 3/8” HT bolt/nut to attach croplifter

CROPLIFD 5 CROPLIFD5HD R Series – Draper Fronts Deluxe Croplifter with saddle (75mm high) $45 $49

and 4” x 3/8” HT bolt/nut

Case-IH CROPLIFD 1 CROPLIFD1HD International 810 Fronts Deluxe Croplifter with saddle (60mm high) $45 $49


CROPLIFD3 CROPLIFD2HD 3050 Deluxe Croplifter with Saddle (75mm high) $45 $49

and 2½” x 7/16” HT bolt/nut to attach croplifter

CROPLIFD 3 CROPLIFD3HD Case-IH 1010 1020 Fronts 2010 2020 Deluxe Croplifter with saddle (75mm high) $45 $49

Macdon and Case-IH Draper Fronts and 21/2” x 7/16” HT bolt/nut to attach croplifter

Advise if Hex Heads or Cuphead Bolts attaching Knife Guards for Macdon – Case-IH Draper Fronts

John Deere CROPLIFD 1 CROPLIFD1HD All 200 & 900 Series Fronts Deluxe Croplifter with saddle (60mm high) $45 $49


CROPLIFD 6 CROPLIFD6HD Draper Fronts 930D 936D 635D 640D Deluxe Croplifter with saddle (75mm high) $45 $49


Massey Ferguson CROPLIFD 1 CROPLIFD1HD All Fronts 20ft to 30ft Deluxe Croplifter with saddle (60mm high) $45 $49


New Holland CROPLIFD 1 CROPLIFD1HD NH 705 805 & 806 Fronts Deluxe Croplifter with saddle (60mm high) $45 $49


CROPLIFD 2 CROPLIFD2HD 971 973 71C 73C Deluxe Croplifter with saddle (60 mm high) $45 $49


CROPLIFD3 CROPLIFD2HD 840CD Deluxe Croplifter with Saddle (75mm high) $45 $49

and 2½” x 7/16” HT bolt/nut to attach croplifter

Honeybee/NH CROPLIFD 4 CROPLIFD4HD Honeybee and New Holland Deluxe Croplifter with saddle (110mm high) $45 $49

Draper Fronts with factory lift kit and 3” x 3/8” HT bolt/nut to attach croplifter

Macdon/Case-IH CROPLIFD 3 CROPLIFD3HD Macdon and Case-IH Deluxe Croplifter with saddle (75mm high) $45 $49

Draper Fronts with Lift Kit and 21/2” x 7/16” HT bolt/nut to attach croplifter

Advise if Hex Heads or Cuphead Bolts attaching Knife Guards

Midwest CROPLIFD 7 CROPLIFD7HD Midwest Belt Fronts Deluxe Croplifter with saddle (60mm high) $45 $49

Belt Fronts and 2” x 3/8” HT bolt/nut to attach croplifter

All Brands – Spare Parts CROPLFNS CROPLFNSHD All brands – replacement main croplifter section NB: Saddle excluded. $33 $38

CLSSTD - Agco Case-IH JD Rigid MF Midwest NH Croplifter Saddle 60mm High $13 –

CLS1010 - CIH Macdon JD Draper Croplifter Saddle 75mm High $13 –

CLSHBEE - Honeybee Croplifter Saddle 110mm High $13 –

Heavy Duty is Double Thickness

←

Roller Chain

AT40-1 Single 1/2” Single Row Chain Box of 10ft

AT40-1CL Single 1/2” Conn Link Single Each

AT40-10L Single 1/2” Offset Link Single Each

AT50-1 Single 5/8” Single Row Chain Box of 10ft

AT50-2 Duplex 5/8” Double Row Chain Box of 10ft

AT50-1CL Single 5/8” Conn Link Single Each

AT50-10L Single 5/8” Offset Link Single Each

AT50-2CL Duplex 5/8” Conn Link Double Each

AT50-20L Duplex 5/8” Offset Link Double Each

AT60-1 Single ¾” Single Row Chain Box of 10ft

AT60-2 Duplex ¾” Double Row Chain Box of 10ft

AT60-1CL Single ¾” Conn Link Single Each

AT60-10L Single ¾” Offset Link Single Each

AT60-2CL Duplex ¾” Conn Link Double Each

AT60-20L Duplex ¾” Offset Link Double Each

AT60-1HD Single ¾” Single Row Chain Heavy Duty (JD’s) Box of 10ft

AT60-1CLHD Single ¾” Conn Link Single Heavy Duty Each

AT60-10LHD Single ¾” Offset Link Single Heavy Duty Each

AT80-1 Single 1” Single Row Chain Box of 10ft

AT80-1CL Single 1” Conn Link Single Each

AT80-10L Single 1” Offset Link Single Each

ALL 10ft BOxES INCLUDE ONE CONN LINK

Get “AGRI-TUFF” Performance!!Drawing heavily on 80 years of design experience and over 20 years of agriculture

experience worldwide, TSUBAKI has developed innovative roller chain “AGRI-TUFF”,

especially designed for agriculture applications. Unique new design and new materials

improve the reliability and life of your agricultural chain drive.

Features Include:• Quad rivetted pins for

sideplate security

• Extra heat treatment of pin for longer chain life

Order Single Pitch Description Buy Code or Duplex Quantity

Cutting Height Gauge

LOKKHG $190

• Know your cutting height at all times• Installs in the cab – on window • Simple – no electrics• Highly visible day or night

Order Code

We Sell & Recommend


Electric Linear Acuators


Electric Linear Actuators12 or 24 Volt for a variety of uses around the farm.Air seeders – Control of seed and fertiliser.Chute doors – Trucks, silos, sheep feeders and fertiliser spreaders.Available in many sizes, load capacities and stroke lengths.We recommend Thomson Warner Electric Linear Actuators – USA manufacture.

Input Voltage 12volt, 24volt 12volt 12volt, 24volt 12volt, 24voltLoad capacity (lbs.) 25 on 12volt 250 on 12volt 50 on 12volt 225 on 12volt 75 on 24volt 112 on 24volt 450 on 24voltStroke length (inches) 1, 2, 4, 6” 4, 8, 12, 18, 24” 4, 6, 8” 4, 6, 8, 10, 12”Type of lead screw Acme screw Acme screw Acme screw Acme screwDuty cycle, full load 25% 25% 25% 25%Load limiting clutch No Yes Yes NoLimit Switches Fixed No Fixed AdjustableMotor overload protection Yes Yes Yes YesPrice $650 $900 $475 $975

CODE ELECTRAK 1 ELECTRAK 2 E050 E150

TP77017 Conus 2 Taper 980mm long $120




TP1841 Conus 2 weld in mounting sleeve $26

Order No. Description/Application Price

Hay Loader Tynes

GPS Receiver Brackets

AFG06 GPS Receiver Bracket $260Suits: Tractors 7200R 7215R 7230R 7260R 7280R 8225R 8235R 8245R 8260R 8270R 8285R 8295R 9410R 9460R 9510R 9560RSuits John Deere S660 S670 S680 S690 Headers

AFG07 GPS Receiver Bracket Kit $280Consists of AFG02 Bracket as above plus adaptorsSuits 00 10 20 and 30 Series 8000 and 9000 Tractors and 4730 - 4940 SP John Deere Sprayers

Display Screen Brackets

AFD02 Display Screen Bracket $300Suits John Deere S660 S670 S680 S690 Headers

2 Way Radio Brackets

Features

• Simple to install, bolting to integrated factory cab mounting holes • Farm inspired custom fit design integrates with cab design

• Mobile - easily moved from machine to machine • Powder coated durable paint finish

AFR01 2 Way Radio Bracket $185Suits John Deere 8100 to 8630 inclusive Tractors 9100to 9630 inclusive Tractors 4730 to 4940inclusiveTractors All with Commandview® Cab

AFR02 2 Way Radio Bracket $185Suits John Deere 7R 8R 9R tractors including track versions

Commandview II® Cab

AFR04 2 Way Radio Bracket $185Suits John Deere S660 S670 S680 S690 Headers

AFR05 2 Way Radio Bracket $185 Suits large frame 6R Tractors

AFM01 Microphone Holder $40 Suits all tractor and header cabs

AFG01 GPS Receiver Bracket $190Converts original Greenstar Bracket to accept starfire with deluxe shroud.Suits 7000 to 7930 inclusive - John Deere tractors windrowers and conditioners and headers 9650STS to 9870STS inclusive Headers

AFD03 Display Screen Bracket $255Suits all John Deere tractors ending with 00 10 20 or 30 all 8000 and 9000 series tractors all 7R 8R and 9R tractors and 4730 - 4940 John Deere sprayers

Suits John Deere Tractors and Headers

Attaching Brackets - 2 way’s, GPS and Screens


Belts


Order No. Model Application Description Price

Agco/Allis Gleaner HB71335475 R40 R42 R50 R52 R62 R72 R55 R65 R75 S67 S77 Rear Feed Conveyor Drive $109

HB71148120 R72 above S/N 79001 R65 above S/N HR62101 R75 R66 R76 S66 S77 Air Cond Compressor Drive 51¼” Length $16 HB71355170 R40 R42 R50 R52 R62 R65 R72 R75 Straw Spreader Drive $80

HB71367469 R62 above S/N 63000 R72 above S/N 73000 S67 S77 Jackshaft Drive Right Hand $112 R65 R66 R75 S68 S78 S88 S96 S97 S97

HBA3289503 R62 above S/N MJ62101 Alternator/Fan Drive $60

HB71368809 R42 R52 R62 R65 R72,R75 S67 S77R66 R76 Clean Grain Elevator $120

HB71364514 R42 R52 R62 R65 R72,R75 S67 S77,R66 R78 Header Drive Constant Speed $165

HB71386695 R42 R52 R65 R62 R72 R75 R66 R76 Impeller/Chopper Drive $88

HB71448482 R62 R72 R65 R75 R66 R76 Rear Feed Conveyor/Chopper Fine Cut $118

HB71374305 R42 R52 R62 above S/N 66001 R72 above S/N 76001 R65 R75 Shoe Drive $95

HB71380601 R62 R65 R72 R75 R66 R76 Bin Unloader C’shaft Left Hand With Turret $110

HB71367459 R42 R52 R62 R65 R72 R75 R66 R76 Tailings Drive $72

HB71367460 R42 R52 R62 R65 R72 R75 R66 R76 S67 S77 S68 S78 S88 Tailings Drive with Tailings Return $135 S96 S97 S98

HB71398366 R42 R52 R62 R65 R72 R75 Bin Unloader Drive Left Hand $73

HBV685121530 R62 R65 R72 R75 Alternator/Fan Drive $105

HB71379787 R62 R65 R66 R72 R75 R76 Spreader Pump Drive $88

HB71448442 R62 R65 R66 R72 R75 R76 Cylinder Drive $580

HB71456526 R65 R67 R75 R77 Header Drive Variable Speed $630

HB71377787 R62 R65 R72 R75 S67 S77 Pivot Jackshaft Drive $195

HB71363802 R62 R65 R66 R72 R75 R76 Separator Drive $153

HB71427223 S67 S77 Rotor Drive $465

HB71438552 S67 S77 S68 S78 S88 S96 S97 S98 Aspirator Fan Drive $18

HB71396754 R62 R66 R72 R76 S67 S77 Rotary Screen $32

HB71444986 S67 S68 S77 S96 S97 S98 Fan/Alternator Drive $59

HB71464666 S68 S78 S88 S96 S97 S98 Bin Unloader Drive $115

HB71370279 S67 S77 R66 R76 R65 R75 S68 S78 S88 Main Clutch Shaft Drive $365

HB71428995 S67 S77 S68 S78 S88 S96 S97 S98 Shoe Drive $52

Case-IH7010 7120 7230 7240 8010 8010AFx 8120 8230 8240 9120 9230 9240

HB500371653 7010 7120 Fan Drive $74

HB504212528 7010 7120 9120 Air Conditioning, Alternator, Water Pump $33

HB86976208 7010-8010 above S/N HAJ202001 7120 8120 9120 7230 8230 9230 Straw Chopper Drive $175 7240 8240 9240

HB87282333 8010 78120 Alternator, Water Pump, Air Conditioner $62

HB86975809 7010 8010 7120 8120 9120 7230 8230 9230 Bubble Up Auger (Left Hand & Right Hand) $106

HB86975809 7240 8240 9240 Clean Grain Elevator $106

HB86517680 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240 Beater Drive $185

HB87283315 (7010 8010 both Prior to S/N 202001) 7120 8120 9120 Straw Chopper Drive 2800 RPM $195

HB87283139 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240 Tailings Drive $112

HB87011585 7010 8010 7120 8120 9120 Unloading Auger Drive $165

HB9513136 8010 8120 Rotary Screen $36

HB87282305 8010 8120 Fan Drive $62

HB87476487 6130 7130 6140 7140 Cleaning System Drive with Beater $210

HB301146A1 6130 7130 6140 7140 Cleaning Fan Drive $85

HB87629602 6130 7130 6140 7140 Feeder Drive without Rock Trap $385

HB87476486 6130 7130 6140 7140 Cleaning System Drive with Chopper $310

®

®Heavy Duty Beltswith Kevlar® fibres

for Strength and Longevity

Belts

Case-IH1420 1440 1460 1480 1620 1640 1644 1660 1666 1680 1688

2144 2166 2344 2366 2188 2377 2388 2577 2588 5088 6088 7088 HB244420A4 1440 1460 1640 1660 1644 1666 2144 2166 2344 2366 Rotor Drive $390 HB244422A4 1480 1680 1688 2188 Rotor Drive $500

HB244423A4 1680 2388 before S/N 0273000 Rotor Drive $555

HB413159A2 2377 2388 above S/N 0273000 S/N 292001-295000 Rotor Drive $420

HB84194650 2377 2388 above S/N 0295001 2577 2588 5088 6088 Rotor Drive $420

HB191241C3 1644 1666 2144 2166 2344 2366 Separator Drive $390

HB84137716 5088 6088 7088 Separator Drive $375

HB400427A1 2377 2388 above S/N 270500 2577 2588 Separator Drive $490

HB1541702C1 1688 2188 2388 before S/N 270500 Separator Drive $305

HB191288C2 1420 1440 1460 1480 1660 1680 before S/N 45689 Auxillary Pump Drive $77

HB124572A1 2166 2366 Auxillary Pump Drive $100

HB124573A1 2188 2388 before S/N 027299 Auxillary Pump Drive $130

HB1541700C1 1688 2144 2344 Auxiliary Pump Drive $115

HB440498A3 2377 2388 above S/N 02730000 2577 2588 Auxiliary Pump Drive $165

HB87476487 1640 1660 1680 1644 1666 1688 2144 2166 2188 Cleaning System Drive with Beater (Also 186509C2) $210 2344 2366 2377 2388 2577 2588 5088 6088 7088

HB191305C1 1440 1460 1640 1660 1644 1666, Cleaning Fan Jackshaft Drive $85 2144 2166 2344 2366 before S/N 0184544

HB301146A1 2366 above S/N 184544 2377 2388 above S/N 292001 2588 6088 7088 Cleaning Fan Drive $85

HB195396C2 1440 1460 1480 1640 1660 1680 Cleaning Fan Drive $90

HB1541569C1 1644 1666 1688 2144 2166 2188 2344 Cleaning Fan Drive $86

2366 before S/N 0184544 2388 before S/N 0198068

HB317904A1 1480 1680 1688 2188 2377 2388 above S/N 0198068 2577 2588 Cleaning Fan Jackshaft Drive $95

HB192738C1 1440 1460 1640 1660 1644 1666 2144 Feeder Drive without Rock Trap $295 2166 2344 2366

HB194528C1 1480 1680 1688 2188 2377 2388 2577 2588 Feeder Drive $320

HB87629602 1440-2366 1688 2188 2388 to S/N 0268799 Feeder Jackshaft Drive with 54½” Feeder House $380 5088 6088 7088 Feeder Drive without Rock Trap

HB1315168C1 1640 1644 1660 1666 2144 2166 2344 2366 Feeder Drive with Rock Trap $340 HB1315074C2 1480 1688 2188 2377 2388 2577 2588 Feeder Drive with Rock Trap $330

HB393750A1 1480 1680 1688 2144 2166 2188 2344 2366 Feeder Jackshaft Drive with 60” Feeder $390 2388 before S/N 0268799

HB402370A1 2388 above S/N 0268800, 2388 above S/N 292001 2377 2577 2588 Feeder Jackshaft Drive with 54½” Feeder $390

HB402368A1 2388 above S/N 0268800 2388 above S/N 292001 2377 2577 2588 Feeder Jackshaft Drive with 60” Feeder $390

HB191290C1 1440 1460 1640 1660 2144 2166 2344 2366 Grain Tank Unloader Drive $85

HB1989216C1 1660 above S/N 102897 1644 1666 Grain Tank Unloader Drive $120

HB1989217C1 1680 1688 2188 2377 2388 2588 Grain Tank Unloader Drive $135 HB396829R1 1660 1666 1688 2166 2188 2366 2388 before S/N 272999 Airconditioner Compressor $17

HB537072R92 1640 1660 1680 Alternator, Fan, Water Pump $60

HBJ911572 1666 1688 2166 2188 Alternator, Fan, Water Pump $50 HB87755884 2366 above S/N 0255700 2388 above S/N 0273000 Alternator, Fan $50

2377 2388 above S/N 292001 2577 2588 6088 7088

HB247428A1 1010 1020 Fronts Knife Drive $100

HB87476487 1440 1460 1480 1620 1640 1644 1660 1666 1680 1688 2144 Elevator Drive without OEM Straw Chopper $210 2166 2188 2344 2366 2377 2388 2577 2588 6088 7088 All with Beater, Replaces 186509C2 HB87476486 1440 1460 1480 1640 1660 1680 1644 1666 1688 Elevator Drive with OEM Straw Chopper $310

2144 2166 2188 2344 2366 2377 2388 2577 2588 6088 7088 (Also 181055C1)



®

Belts


®

Case-IH1420 1440 1460 1480 1620 1640 1644 1660 1666 1680 1688

2144 2166 2344 2366 2188 2377 2388 2577 2588 5088 6088 7088 continued HB84172256 1460 above S/N 23250 1480 above S/N 24000, Straw Spreader Drive $90 1640 1644 1660 1666 1680 1688 2144 2166 (Replaces 196371C1) 2344 2366 2188 2388 2377 2577 2588

HB1315265C1 1640 1660 1644 1666 2144 2166 2344 2366 Straw Chopper Drive $95

HB1315266C1 1680 1688 2188 2377 2388 2577 2588 Straw Chopper Drive $130

John Deere S660 S670 S680 S690

HBH221498 S660 Rotor Drive $735

HBH208431 S670 S680 S690 Rotor Drive $1195

HBH156541 S660 S670 S680 S690 Feeder House Drive and Reel Pump - High Capacity $400 HBAH150678 S660 S670 S680 S690 Right Hand Jackshaft (Front) $165 HBH154723 S660 S670 S680 S690 Right Hand Jackshaft (Rear) $115 HBH154731 S660 S670 Tailings Elevator Drive $62 HBH221273 S660 S670 S680 S690 Rotary Screen (Screen Side) $60 HBAXE32806 S660 S670 S680 S690 above S/N 745101 Alternator with front drive $75 HBH203474 S660 Feeder House - Fixed Speed $185

HBH218726 S660 Feeder House - Variable Speed Heavy Duty $425

HBHXE45928 S660 S670 Feeder House Variable Drive, High Torque $595

HBH174885 S660 S670 S680 S690 Feeder House - Fixed Speed, Heavy Duty, High Torque $385

HBH229018 S670 S680 S690 Front End Drive 5-speed feeder house $660 HBH223230 S670 S680 Clean Grain Elevator $350

HBH238867 S660 S670 S680 S690 Rotary Screen (Engine Side) $32

HBH236472 S660 S670 S680 S690 Feed Accelerator, Std Speed $180 HBH230230 S670 S680 S690 Feed Accelerator, High Speed $245

HBH221732 S660 S670 S680 S690 Feed Accelerator, Slow Speed $210

HBAXE15594 S660 S670 S680 S690 Cleaning Fan Drive $120 HBH175587 S660 S670 S680 S690 Shoe Conveyor Auger Drive $255

HBAH160080 S660 S670 Unloading Auger System $135

HBAH233198 S680 S690 Unloader Drive $175

HBH241000 S670 Chopper Drive, Upper, XFC (3HC) $390

HBH240888 S680 S690 Chopper Drive, Upper, XFC (4HC) $570

HBH240974 S660 S670 S680 S690 Chopper Drive, Lower, XFC (3HC) $400

HBAH236689 S670 S680 S690 Discharge Beater Drive (Joined Belt, 2 Bands) $240

John Deere9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS

HBH221498 9650STS 9750STS 9660STS 9670STS 9760STS Rotor Drive $735 HBH208431 9860STS above S/N 705798 9770STS 9870STS Rotor Drive $1195

HBH207851 9860STS to S/N 705797 9750STS Rotor Drive – Variable $1170

HBH111519 9650STS 9750STS before S/N 695601 Feeder House Drive (Fixed Speed) $155

HBH156541 9650STS 9750STS 9660STS 9760STS Feeder House Drive and Reel Pump - High Capacity $400 9860STS 9670STS 9770STS 9870STS

HBH174885 9860STS 9870STS Feeder House - Fixed Speed, Heavy Duty $385

HBH156796 9650STS 9750STS 9660STS 9760STS 9860STS 9670 9770 Feeder House - Fixed Speed $220

HBHXE45928 9660STS 9670STS 9760STS 9770STS 9860STS Feeder House Variable Drive, High Capacity (Also H220911) $595

HBH218726 9650STS 9660STS 9670STS 9750STS 9760STS 9770STS 9860STS Feeder House Variable Speed Heavy Duty $425

HBH205169 9650STS above S/N 700501 9750STS above S/N 695601 Feeder House Variable Speed Standard Capacity $355

HBH157732 9650STS to S/N 700500 9750STS before S/N 695601 Feeder House Variable Speed Standard Capacity $300

HBH203474 9660STS 9670STS 9760STS 9770STS 9860STS Feeder House Fixed Speed $185

HBH201334 9660STS Feeder House Variable Speed Standard Capacity $345

HBAH150678 9650STS 9750STS 9660STS 9760STS Right Hand Jackshaft (Front) $165 9860STS 9670STS 9770STS 9870STS



Belts

John Deere9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS continued

HBH154723 9650STS 9750STS 9660STS 9760STS Right Hand Jackshaft (Rear) $115 9860STS 9670STS 9770STS 9870STS HBH154731 9650STS 9750STS 9660STS 9760STS Tailings Auger and Elevator Drive $62 9860STS 9670STS 9770STS 9870STS HBH221731 9650STS 9750STS 9660STS before S/N 715401 Feed Accelerator - Standard Speed $310 9760STS before S/N715501 9860STS before S/N 715601 HBH236472 9660 above S/N 715401 9760 above S/N 715501, Feed Accelerator (Standard) $180 9860 above S/N 715601 HBH230230 9870STS above S/N 730101 Feed Accelerator, High Speed $245 HBH221732 9650STS 9750STS 9660STS 9760STS 9860STS Feed Accelerator - Slow speed or Rice $210 9670STS 9770STS 9870STS 9880STS HBR135609 9650STS 9660STS 9750STS 9760STS Alternator (185 Amp.) $80 HBR135606 9650STS 9660STS 9750STS 9760STS Alternator (95 Amp.) $60 HBH221733 9650STS 9660STS 9670STS to S/N 730100 9750STS 9760STS Feed Accelerator Drive; High-Speed $250 9770STS 9860STS 9870STS before S/N 730100 HBH229018 9670STS 9770STS 9870STS Header/Reel Pump $660 HBH155998 9650STS 9660STS Header & Reel Pump HIGH CAPACITY $345 HBH156541 9750STS 9660STS 9670STS 9750STS 9760STS Header & Reel Pump HIGH CAPACITY $400 9770STS 9860STS 9870STS HBH125565 9650STS above S/N 695601 9750STS above S/N 695601 Powershaft & Reel Pump $185 HBH157104 9650STS before S/N 695600 9750STS before S/N 695600 Rotary Screen (Engine Side) $30 HBH206807 9650STS above S/N 695601 9660STS before S/N 715401 Rotary Screen (Engine Side) $28 9750STS above S/N 695601 9760STS before S/N 715501 9860STS before S/N 715601 HBH221273 9670STS 9770STS 9870STS above S/N 745101 Rotary Screen (Screen Side) $60 HBH213353 9660STS above S/N 715401 9670STS 9760STS Rotary Screen (Engine Side) $35 above S/N 715501 9770STS 9860STS above S/N 715601 9870STS HBH214241 9660STS above S/N 715401 9760STS above S/N 715501, Rotary Screen Drive (Screen Side) $65 9860STS above S/N 715601 HBH175628 9650STS above S/N 695601 9660STS before S/N 715400 Rotary Screen (Screen Side) $59 9750STS above S/N 695501 9760STS before S/N 715601 9860STS before S/N 715601 HBH235564 9650STS above S/N 700501 9750STS above S/N 700601 Straw Chopper (Also H204747) $200 9660STS 9760STS 9670STS 9770STS 9870STS HBHXE10556 9670STS 9770STS 9870STS Countershaft, Beater & Chopper, Replaces H223385 $280 HBH223212 9770STS 9870STS Straw Chopper $295 HBHXE10501 9670STS 9770STS 9870STS Countershaft, Beater & Chopper, Replaces H223384 $345 HBR503312 9860STS 9870STS Engine Fan $130 HBH218645 9650STS 9660STS 9670STS 9750STS 9760STS 9860STS Clean Grain Elevator $170 HBH223230 9770STS 9870STS Clean Grain Elevator $350 HBH165072 9650STS 9750STS Cleaning Fan $110 HBH206048 9660STS 9670STS 9760STS 9770STS 9860STS Cleaning Fan $110

HBHXE15671 9650STS 9660STS 9670STS 9750STS Countershaft Beater & Chopper (Replaces H157514) $200 9760STS 9770STS 9860STS 9870STS HBH175587 9650STS 9660STS 9670STS 9750STS 9760STS 9770STS Shoe Fan & Conveyor Augers $255 9860STS 9870STS 9880STS HBAH160080 9650STS 9660STS 9670STS 9750STS Unloading Auger System $135

9760STS 9770STS 9860STS 9870STS

HBH219182 9650STS 9660STS 9670STS 9750STS 9760STS 9770STS Discharge Beater $120 9860STS 9870STS

John Deere9400 9410 9500 9510 9600 9610 CTS CTSII

HBH210476 9400 9410 9500 9510 9600 9610 CTS CTSII 9650CTS Cylinder Intermediate Drive $395 HBH115881 9400 9410 9500 9510 9600 9610 CTS CTSII 9650CTS Cylinder Drive $265 HBH137670 9400 9410 9650CTS Cylinder Intermediate Drive, Ext. Range $400 HBH118618 9500 9510 9600 9610 CTS CTSII 9650CTS 9660CTS Cylinder Drive, Slow Speed $230

HBH125565 9400 before S/N 635101 9500 before S/N 635201, Reel Pump and Header $185 9600 before S/N 635301


®


Belts®


John Deere9400 9410 9500 9510 9600 9610 CTS CTSII continued

HBH151952 9410 9510 9600 above S/N 63530 9610 Reel Pump and Header $170 9400 9500 above S/N 635201 CTS CTSII 9650CTS 9660CTS

HBH161648 9400 9410 9500 9510 9600 9610 CTS CTSII 9650CTS 9660CTS Feeder House Variable Speed $270

HBH126345 9400 9410 9500 9510 9600 9610 CTS CTSII 9650CTS Feeder House Fixed Speed with Reverser $175

HBH131169 9400 9410 9500 9510 9600 9610 CTS CTSII 9650CTS 9660CTS Shoe, Straw Walker, Conveyor Auger $170

HBAH158880 9400 9410 9500 9510 9600 9610 CTS CTSII 9650CTS 9660CTS Unloading System $115

HBH128010 9400 9410 9500 9510 9600 9610 CTS CTSII 9650CTS 9660CTS Secondary Counter Shaft $105

HBH125380 9400 9410 9500 9510 9600 9610 Straw Chopper Front $105

HBN110085 9400 9410 9500 9510 9600 9610 CTS CTSII 9650CTS 9660CTS Tailings Auger and Elevator (Lower) $75

HBH219182 CTS CTSII Straw Chopper Front $120

HBRE44538 9400 before S/N 635101 9600 before S/N 631201 Alternator $40

HBH101813 9400 9500 9600 9410 9510 CTS CTSII 9650CTS 9660CTS Alternator $24

HBH141429 CTS CTS II Separator Drive $560

HBM140021 CTS II 9510 Chaff Spreader Drive, Straw Spreader Also M95728 $100

HBH128234 9500 9510 9600 9610 Straw Spreader $90

HBH80896 9400 9410 9500 9510 9600 Air Conditioning Compressor $15

HBH163515 9610 9650 CTS before S/N 695401 Air Conditioning Compressor, Alternator $80

HBH27433 9400 above S/N 640101 9410 Chopper, Windrow Or Forward Position $53

HBH23950 9500 9510 9600 9610 Chopper, Windrow Or Forward Position $71

HBH125381 9500 9510 9600 9610 Chopper, Rear Operating Position $95

HBH132808 9410 9500 9510 9600 before S/N 641717 Cooling Fan $28

HBH153297 9500 9600 above S/N 641717 9610 CTS Cooling Fan $85

HBH132809 9400 9410 Cooling Fan $28

HBH145158 9400 above S/N 640506 9500 above S/N 642579 Rotary Screen $74

9600 above S/N 641717 9410 9510 9610 CTSII

HBH146636 9400 above S/N 640506 CTS above S/N 645511 9410 Rotary Screen Drive $20 9500 above S/N 642579 9600 above S/N 641922 9610

HBH175632 CTS CTSII 9650CTS 9660CTS Rotary Screen (Screen Side) $35

HBH141167 9400 above S/N 640101 9500 above S/N 640201 9610 CTS Clean Grain Elevator $185

HBH141166 9600 above S/N 640301 Clean Grain Elevator $195

HBH140404 9400 before S/N 670101 9500 before S/N 670201, Separator Fan, Regular Speed $110

9600 before S/N 670301 CTS before S/N 670401

HBH152146 9400 9500 9600 above S/N 670301 Separator Fan, Regular Speed $125

9410 9510 9610 CTS above S/N 670401 CTSII

HBAH139436 9400 9410 9500 9510 9600 9610 Beater Drive $100

New HollandCR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080 CR9090

HB87053803 CR920 CR940 CR960 CR970 CR9070 Rotor Variator (2944mm) $875

HB87053804 CR920 CR940 CR960 CR9040 CR9060 Rotor Variator (2997mm) $895

HB87676816 CR920 CR940 CR960 CR9060-CR9070 before S/N C627 Rotor Variator, High Speed (2997mm) $995 CR9060 CR9070 above S/N D627

HB87540195 CR970 CR9080 CR9090 before S/N C660 some CR8090 Rotor Variator, High Speed, High Performance (2945mm) $990 CR9080 CR9090 above S/N D660 CR10.90

HB504212528 CR9040 CR9060 Air Conditioner Compressor $33

HB87580099 CR920 CR940 CR960 CR970 CR9040 CR9060 Beater Drive $140

HB84175581 CR9060 CR9070 CR9080 CR9090 CR7090 CR8080 CR8090 Beater Drive $225

HB87580100 CR920 CR940 CR960 CR970 CR9040 CR9060 Chopper Drive Upper and Lower $135 CR9070 CR9080 CR6090 CR7090 CR8080 CR8090 CR6.80 CR6.90 CR7.90

HB87580097 CR920 CR940 CR960 CR970 CR9040 CR9060 Main Drive $325


Belts

New HollandCR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080 CR9090 continued

HB87319821 CR9040 CR9060 CR9070 CR9080 Grain Elevator Drive $150

HB87580097 CR920 CR940 CR960 CR970 CR9040 CR9060 Main Drive (4V) $325 HB87545651 CR9060 CR9070 CR9080 CR9090 CR7090 CR8080 Main Drive (5V) $435 CR8090 CR6.80 CR6.90 CR7.90

HB86729163 CR920 CR940 CR960 CR970 CR9040 Primary Feeder Drive with Variator $225 CR9060 CR9070

HB86589482 CR920 CR940 CR960 CR970 CR9040 CR9060 Primary Feeder Drive without Variator $300 CR9070 CR9080

HB87325684 CR920 CR940 CR960 CR970 CR9040 CR9060 Returns Drive, LH Enhanced Cleaning $75 CR9070 CR9080 CR9090

HB87325684 CR6090 CR7090 CR8080 CR8090 CR6.80 CR6.90 Shaker Shoe Drive $75 CR7.90 CR8.90 CR9.90 CR10.90

HB84057085 CR920 CR940 CR960 CR970 Rotary Fan $45 HB87325327 CR920 CR940 CR960 CR970 Rotary Fan Jackshaft $22 HB84072421 CR920 CR940 CR960 CR970 CR9040 CR9060 Secondary Feeder Drive $540 HB87315599 CR920 CR940 CR960 CR970 CR9040 CR9060 Shaker Shoe Drive $80 CR9070 CR9080 CR9090

HB84332126 CR920 CR940 CR960 CR970 Return Drive Left Hand $75

HB87011585 CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080 Unloading Auger Drive $150 CR9090 CR6090 CR7090 CR8080 CR8090 CR6.80 CR6.90 CR7.90

HB84058339 CR960 CR970 CR9060 CR9070 CR9090 Returns Elevator Drive, RH (Also 84332132) $55 HB86596143 CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 Feeder Drive, Vari-Speed with Variator $800

HB87583899 CR9040 CR9060 CR9070 CR9080 Primary Feeder Drive with Variator $215 HB87545653 CR9060 CR9070 CR9080 CR9090 CR7090 CR8080 CR8090 Secondary Feeder Drive $625

HB87583907 CR9040 CR9060 CR9070 CR9080 Feeder Drive with Variator $485 HB84817627 CR920 CR940 CR960 CR970 Cleaning Fan, Self Levelling Variator Drive $140

HB86595191 CR920 CR940 CR960 CR970 Elevator Grain Drive $55

HB86566287 CR920 CR940 CR960 CR970 Shaker Shoe $85

HB87344277 CR9040 CR9060 CR9070 CR9080 CR9090 Water Pump $115

New Holland Cx840 Cx860 Cx880 Cx8070 Cx8080 Cx8090

HB84057914 CX840 CX860 CX880 Main Drive $255

CX8070-CX8080-CX8090 prior to S/N C724

HB84061293 CX840 CX860 CX880 CX8070 CX8080 CX8090 Unloading Auger $120

HB84045256 CX840 CX860 CX880 CX8070 CX8080 CX8090 Beater Drive $105

HB84332126 CX840 CX860 CX880 CX8070 CX8080 CX8090 Shaker Shoe, Self Levelling $78

HB84057874 CX840 CX860 CX880 CX8070 CX8080 CX8090 Tailings Elevator & Shaker Shoe, Self Leveling $85

HB84057392 CX840 CX860 CX880 CX8070 CX8080 CX8090 Cleaning Drive, Intermediate Shaft $140

HB84057482 CX840 CX860 CX880 CX8070 CX8080 CX8090 Straw Walker $60

HB84035748 CX840 CX860 CX880 CX8070 CX8080 Variator Drum $575

HB84061279 CX840 CX860 CX880 CX8070 CX8080 CX8090 Header Drive $270

HB84073457 CX840 CX860 CX880 CX8070 CX8080 CX8090 Grain Elevator $35

HB84058339 CX840 CX860 CX880 CX8070 CX8080 CX8090 Bottom Auger Tailings Elevator $55

HB84057085 CX840 CX860 CX880 CX8070 CX8080 CX8090 Rotary Fan $45

HB84817627 CX840 CX860 CX880 CX8070 CX8080 CX8090 Vari Drive Fan Self Level $140

HB84175581 CX840 CX860 CX880 CX8070 CX8080 CX8090 Chopper Drive Upper $225


®

Midwest MW14MGT3137 Midwest Belt Fronts Knife Drive Belt $900

MW4B77 Suit Agco/Claas - Midwest Belt Fronts 4 B banded belt Drum Drive Belt 77” $275

MW4B78 Suit Case New Holland - Midwest Belt Fronts 4 B banded belt Drum Drive Belt 78” $275

MW4B79 Suit John Deere - Midwest Belt Fronts 4 B banded belt Drum Drive Belt 79” $275


Belts®


New Holland TR70 TR85 TR86 TR87 TR88 TR89 TR95 TR96 TR97 TR98 TR99 Tx66 Tx68

HB86518568 TR89 TR95 TR96 TR97 TR98 Rotor Vari-Drive - Standard $560

HB86610859 TR89 TR95 TR96 TR97 TR98 TR99 Rotor High Speed (Replaces 86518569) $625

HB86610858 TR89 TR96 TR97 TR98 TR99 Rotor Drive - Varispeed - Standard $760

HB703747 TR70 TR75 TR85 TR86 TR87 TR88 Clean Grain Elevator Drive (Also HB191288C2) $55

HB9604713 TR89 TR96 TR97 TR98 TR99 Clean Grain Elevator Drive - Improved $148

HB247782 TR70 TR75 TR85 Unloading Auger Drive $65

HB785415 TR70 TR75 TR85 TR86 TR87 TR88 Shaker Shoe Drive $210

HB86615142 TR89 TR95 TR96 TR97 TR98 TR99 Discharge Beater Drive (Also 86520042) $140

HB682008 TR99 Header Drive (Also 86537318) $325

HB246980 TR70 TR75 TR85 TR95 Header Drive $180

HB577900 TR70 TR75 TR85 Beater Drive $52

HB797978 TR86 above S/N 527531 TR87 below S/N 556481 Main Drive Hydrostatic $495

HB9842665 TR87 TR88 Main Drive Hydrostatic $455

HB9832309 TX66 TX68 Feeder Drive $190

HB9850770 TX66 TX68 Rotary Separator Drive $60

HBD8NN10C318AA TR88 TR89 TR98 TR99 Air Conditioner Compressor $28

HB573957 TR88 Rotary Screen Drive $35

HB84817621 TR95 TR96 TR97 TR98 Clean Grain Elevator Drive (Also 230164) $70

HB191288C2 TR70 TR75 TR85 TR86 TR87 TR88 Clean Grain Elevator Drive $77

HB699268 TR86 TR87 TR88 TR89 TR97 TR98 TR99 Feeder Drive $380

HB80774747 TR89 TR95 TR96 TR97 TR98 TR99 Shaker Shoe Drive $160

HB80618040 TR89 TR95 TR96 TR97 TR98,TR99 Straw Spreader Drive $88

HB87020184 TR89 TR95 TR96 TR97 TR98 TR99 Unloading Auger Drive (Also 86514256) $88

Massey Ferguson HB227455M1 8570 8780 9690 9790 Jackshaft Drive, Spreader & Grain Elevator Drive $65

HB2619760W1 8560 8570 8780 Return Elevator Drive $35

HB2612330W1 8560 8570 8780 Fan Drive - Varispeed $130

HB71444986 9695 above S/N BHC06101 9795 above S/N BHC07101 Fan & Alternator $59

HB2624390W1 8560 8570 8780 above S/N V51101 Beater Drive $255

HB71388712 8780 9690 9790 Chopper Drive $150

HB531603M1 8780 before S/N MJ87101 and above S/N V51101 Air Cond Compressor Drive $20

HB71148120 8780 above S/N MJ87101 9690 9695 9790 9795 Air Cond Compressor Drive $16

HB111677W1 8570 8780 before S/N MJ87101 and above S/N V51101 Alternator & Fan Drive $48

HB288-1607 9895 above S/N HUC8101 Alternator & Fan Drive $110

HBV685121530 9690 9695 9790 9795 9895 Alternator & Fan Drive $105

HB71444986 9520 9695 9795 Alternator & Fan Drive $59

HB71385693 8780 before S/N MJ87101 8780 above S/N V51101 9790 Countershaft Drive $210

HB108190W1 8570 8780 above S/N V51101 Feeder Drive (3 Banded) $375

HB71379124 8780 above S/N W55101-HL87999 Feeder Drive (4 Banded-209” Belt Length) $385

HB111954W1 8780 Rotor Pump Drive $220

HB71418976 9690 before S/N HR87101 9790 9795 Rotor Pump Drive $203

HB71396754 9690 9695 9790 9795 9895 Rotary Screen $29

HB1764410W1 8560 8570 8780 Rotary Screen $30

HB104259W1 8570 (240Hp @ 2200 Rpm Engine Only) 8780 Rotary Screen $21

HB71398388 9690 9790 above S/N HP36101 9895 above S/N HSC8101 Feeder, Pivot Shaft $120

HB71427255 9695 9795 9895 above S/N HUC8101 Feeder, Pivot Shaft $132

HB71390188 9560 9690 9695 9790 9795 9895 Countershaft, Main $190

HB71390199 9690 9695 9790 9795 9895 Shaker Shoe Pitman $120

HB101102M1 8570 8780 9690 9790 Unloader Drive $175

HB71410767 9520 9695 9795 9895 Unloader Drive $130

HB71398384 9690 above S/N HP87101 9790 above S/N HP36101 Beater, Feederhouse Jackshaft $220 9695 9795 9895

HB71438552 9540 9560 Aspirator Fan $18


Rubber & Canvas Seals & Curtains, Auger Spouts®

AGCO - GLEANERHPAC-0405 Single Spreader Curtain $200

Suits R42 R52 R62 above S/N 63001 R65 R72 above S/N 73001 R75Original Part: 71370405

HPAC-4603 Dual Spreader Curtain Left $125Suits R62 above S/N 63001 R65 R72 above S/N 73001 R75Original Part: 71374603

HPAC-4598 Dual Spreader Curtain Right $220Suits R62 above S/N 63001 R65 R72 above S/N 73001 R75Original Part: 71374598

CASE-IHHPIHC-1089 Cleaning Shoe Door Shield $325

Suits 1688 2188 2377 2388Original Part: 87301089

HPIHC-2639 Cleaning Shoe Door Shield $275Suits 1644 1666 2144 2166 2344 2366Original Part: 122639A4

HPIHC-8916 Side Curtain for Straw Spreader $55Suits 1644 1666 1688 2144 2166 2188 2344 2366 2388 2377 2577Original Part: 1308916C2

HPIHC-3211 Side Curtain for Straw & Chaff Spreader $65Suits 2144 2166 2188 2344 2366 2377 2388Original Part: 103211A2

HPIHC-9170 Side Curtain when fitted with Factory Straw $130 and Chaff Spreader KitSuits 1644 1666 1688 2144 2166 2188 2344 2366 2388 2377Original Part: 87739170

HPIHC-0277 Straw Spreader Rubber Guard $92Suits 2377 2388 2577 2588Original Part: 140277A1

HPIHC-4419 Spreader Canvas Curtain $195Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240 Original Part: 84384419 87752499

HPIHC-4248 Feederhouse Cover Seal - Top $30Suits 1688 2188 2188 2388 2588 6088 7088 2377 2577Original Part: 634245R2

HPIHC-9332 Straw Chopper Rubber Seal $68Suits 2188 2388 2588 2377 2588 Original Part: 1979332C4

HPIHC-4004 Straw & Chaff Spreader Rubber Seal $125Suits 2188 2388 2588 2377 2588Original Part: 124004A2

HPIHC-4558 Straw & Chaff Spreader Rubber Seal $125Suits 2144 2166 2344 2366Original Part: 124558A2

HPIHC-6999 Straw Spreader Rubber Seal $80Suits 1644 1666 2144 2166 2344 2366Original Part: 1346999C1

HPIHC-7000 Tailings Auger/Gate Seal $175Suits 1644 1666 2144 2166 2344 2366Original Part: 1347000C2

HPIHC-4916 Rubber Damper Chaff Sreader $25Suits 7010 7120 7230 7240 8010 8120 8230 8240 9230 9240Original Part: 84154916

HPIHC-1543 Canvas Grain Pan Seal $34Suits 7010 7120Original Part: 87391543

HPIHC-6934 Canvas Grain Pan Seal $40Suits 7230 8010 8120 8230 9120 9230Original Part: 87376934

HPIHC-3488 Unloading Auger Spout $115Suits 1640 1660 1680 1644 1666 1688 2144 2166 2188 2344 2366 2377 2577 2588Original Part: 113488A1

HPIHC-1176 Ladder - Bottom Step Rubber Support $80Suits 2344 2366 2377 2388 2577 2588Original Part: 87301176

JOHN DEEREHPJD-8305 Limit Curtain Beater $15

Suits 9400 9410 9500 9510 9600 9610Original Part: R26413

HPJD-0556 Isolater Seal Feeder House $55Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS S660 S670 S680 S690Original Part: H220556

HPJD-4853 Flap-Air Chute Straw Chopper $55Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS 9870STSOriginal Part: H204853

HPJD-7528 Seal - Straw Chopper Hood $45Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS 9870STSOriginal Part: H157528

HPJD-9780 Unloading Auger Spout $115Suits 7720 8820 9400 9410 9500 9510 9600 9610 9650STS 9750STS CTS CTSIIOriginal Part: H149780

HPJD-8234 Unloading Auger Spout $70Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690

Original Part: H208234

HPJD-6126 Hanger - Lower Step $105Suits 9400 9410 9500 9510 9600 9610 CTS CTSII 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STSOriginal Part: H136126R

Case-IH


Auger Elevator and Grain Tank Parts

AIHCC60 Unloading Auger Elbow $1375Suits 1420 1440 1460 1480 1640 1644 1660 1666 1680 2144 2166 2344 2366 1688 2188 2388 2577 2588

Original Part: 248308A2 87598258 193417C94 291131A2

Heavy Duty 1” thick ring welded seam 10 Bolt mount

HPIHC-9463 Output Shaft – Lower Grain Tank $150Unloading AugerSuits 1640 1644 1666 1680 1688 2144 2166 2188 2344 2366 2344 2366 2377 2388

Original Part: 1989463C1

HPIHC-2945 Sprocket Grain Elevator Drive $140 25/30 Teeth 1¼” BoreSuits 2144 2166 2188 2344 2366 2388

Original Part: 182945A1

HPIHC-9462 Lower Grain Tank Auger Input Shaft $100Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388


HPIHC-7260 Upper Unloading Gearbox Pinion $225Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588


HPIHC-7859 Bearing Support Unloading Auger $80Suits 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388


LAIVU-1640 Vertical Unloading Auger 50” long $550Splined both ends Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388 2588

Original Part: 1347389C2 87325666

LAIVU-8010 Vertical Unloading Auger 47¼” long $950Suits 6088 7088 7010 7120 7130 7230 7240 8010 8120 8230 8240 9120 9230 9240

Original Part: 84447940 87756536 87733266

HPIHC-8307 Vertical Unloading Auger $920Grain Tank TubeSuits 1440 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388

Original Part: 248307A2 87593313 1338394C1

LAIHU-1680-2 Horizontal Unloading Outer Auger 125½” long $930Split – suits two piece – Has hex end to couple with Front Auger (Total Auger 208”)Suits 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388

Original Part: 199023A1 183926A1 87379141 132147C9

LAIHUP-1680 Hex Connector 6” long $35Suits 2 piece Augers 1660 to 2388 inclusive


LAIHU-1680-3 Horizontal Unloading Inner Auger 92 “ long $900Split – suits two piece (172” or 208” Total) 19 Splined Drive EndSuits 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388Original Part: 198987A2 1989388C2 282176A1

LAIHU-1680-4 Horizontal Unloading – Outer Auger 89¼” long $725Split – suits two piece – Has hex end to couple with Front Auger (Total Auger 172”)Suits 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388Original Part: 1317680C2

HPIHC-9509

Auger, Horizontal Unloading 17Ft 8” long $2250Suits 7010 8010

Original Part: 87729509 87575221

HPIHC-7899 Unloading Auger Tube-Rear 119” long $1070Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388Original Part: 1317899C4

HPIHC-7738

Unloading Auger Tube-Front 90” long $1050Suits 1620 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388Original Part: 1317738C1

HPIHC-7783 Unloading Auger Tube - Outer 82½” long $850Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388Original Part: 1317783C5

HPIHC-2623

Unloading Auger Extension Bearing Holder $52Suits 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


HPIHC-0158

Horizontal Unloading Auger Tube 18 Ft. $2530Suits AFX8010

Original Part: 87470158 87284775

HPIHC-0339 Auger; Horizontal Unloading, 18 Ft long $1800Suits 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240

Original Part: 87280339 84073843

HPIHC-9121

Pulley, Unloading Auger Drive $135Suits 7010 8010 7120 8120 9120


HPIHC-5223 Unloading Auger Extension 3ft long $925 Suits 6088 7088 7010 7120 8010 8120 8230 8240 9120 9230 9240 Original Part: 87575223 87657822 87575225

HPIHC-0154

Tube; Unloading Auger Extension, 3 Ft. $975Suits AFX8010

Original Part: 87470154 87354454

LAIC-1640

Clean Grain Auger 681/₄” long $3307” Od Flight, 1¼“ shaftSuits 1640 1644 1660 1666 2144 2166 2344 2366Original Part: 1317484C3

LAIC-1680

Clean Grain Auger 76” long $4407” Od Flight, 1¼” ShaftSuits 1480 1680 1688Original Part: 1317409C1 1319173C1

LAIC-2188

Clean Grain Auger 76” long $475 13/8” ShaftSuits 2188 2388Original Part: 143959A3 249279A1

LAIC-8010

Clean Grain Auger 1003/8” long $800Suits 7010 7120 7230 8010 8120 8230 9120 9230Original Part: 87283130 86975024

HPIHC-9374 Clean Grain Auger Trough $300Suits 1680 1688 2188 2377 2388 2577 2588Original Part: 1989374C1 87395607


Case-IH

Auger Elevator and Grain Tank Parts continuedHPIHC-7452 Clamp - Auger Trough $120

Suits 1640 1660 1644 1666 2144 2166 2344 2366Original Part: 1317452C1 NEW

LAID-2344C Inclined loading Auger – 47¼” long $850 Split flight for monitor on AFS (16 Spline)Suits 1688 2144 2188 2344 2366 2388Original Part: 320724A3 222801A4

LAID-1660 Inclined Loading Auger 47¼” long $645No split in FlightingSuits 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388 2377 2577 2588Original Part: 1968853C3 87347842 249275A2

HPIHC-3272

Auger, Bubble Up; 72½” long $975Suits 7010 8010 7120 8120 9120Original Part: 87733272

LAID-1644 Loading Auger 79” long $450Suits 1640 1660 1666 2144 2166 2344 2366Original Part: 1318912C3

HPIHC-9492

Sprocket, Bubble Up Auger; Driven 26 Tooth $60Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 86999492

HPIHC-3275

Auger, Bubble Up $850Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 87733275

LAIR-1480 Return Grain Auger – 85½” long, 11/₈” Shaft $300Suits 1480 1680 1688Original Part: 192549C2

LAIR-2166 Return Grain Auger – 62½” long $400Suits 2144 2166 2344 2366Original Part: 144021A2

LAIR-2188 Return Grain Auger – 85½” long $480Suits 6088 7088 2188 2388 2588Original Part: 144028A2

LAIR-8010 Return Grain Auger 98¼” long $1050Suits 7010 7120 8010 8120 9120Original Part: 87730185 84402652

LAIR-8010A Auger, Tailings 88” long $1250Suits 7010 8010 7120 8120 9120Original Part: 87730183 87573646

LAIB-1440 Auger – Grain Tank bottom 1103/8” long $775Suits 1440 1460 1480 1640 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388 2577 2588Original Part: 192784C3 87617556

LAIB-8010 Auger – Grain Tank Front 1207/8” long $800Suits 7010 8010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 87280345 84075319

LAIB-8010R Auger - Grain Tank Bottom Rear 1207/8” long $825Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 87280343 84075320

LAIT-1440 Return Grain Auger – Upper Delivery - 255/8” $280Suits 1440 1460 1640 1660 1666 2144 2166 2344 2366Original Part: 193225C1

LAIT-1480 Return Grain Auger – Upper Delivery - 375/8” $320Suits 1480 1680 1688 2188 2388 2588 6088 7088 7130Original Part: 192563C1 87379140

HPIHC-9229 Auger – Grain Bed 783/8” long, 7/8” Hex Shaft $325Suits 1420 1440 1460 1480 1620 1640 1644 1660 1666 1680 2144 2166 2188 2344 2366 2388 2588 Left Hand RotationOriginal Part: 1309229C1

HPIHC-8541 Auger – Grain Bed 783/8” long, 7/8” Hex Shaft $260Suits 1420 1440 1460 1480 1620 1640 1644 1660 1666 1680 2144 2166 2188 2344 2366 2388 2588 Right Hand RotationOriginal Part: 1308541C1

HPIHC-3414 Bearing Block-Wooden – Shoe Supply $20Suits 1420 1440 1460 1480 1620 1640 1644 1660 1666 1680 2144 2166 2188 2344 2366 2388 2588 2577Original Part: B94626 193414C2

HPIHC-1677 Bevel Gear – 14 Tooth 11/8 Hex $34Fits Driving Shaft - Auger Bed Suits 1420 1440 1460 1480 1620 1640 1644 1660 1666 1680 2144 2166 2188 2344 2366 2388 2377 2577 2588Original Part: 191677C1 87375654

HPIHC-4194 Bevel Gear – 14 Tooth 7/8”Hex $38 Fits Auger – Grain BedSuits 1420 1440 1460 1480 1620 1640 1660 11666 680 2144 2166 2188 2344 2366 2377 2388 2577 2588 6088 7088Original Part: 194194C1 185410C1 87375653

TLIHC-1660T

Grain Tank Loading Tube – Upper $175Suits 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588Original Part: 1321560C3

TLIHC-1660B

Grain Tank Loading Tube – Bottom $195Suits 1660 1666 1680 2144 2166 2188Original Part: 1321557C2

TLIHC-16601B

Trough - Clean Grain Auger Tube 35” long $195(with Monitor Window) Suits 2144 2166 2188 2344 2366 2388 2377 2577 2588Original Part: 199006A2

TLIHC-16602B Guard - Lower Grain Elevator Head $675Suits 2366 2388 below S/N 276540 and above S/N 0292001 2577 above S/N 300001 2588 above S/N 300001Original Part: 251472A1

HPIHC-2475 Unloading Auger Housing Lower $1350Suits 1640 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588Original Part: 192475C3 192472C1

HPIHC-8584 Clean Grain Elevator Boot (Inner) $125Suits 1680 1688 2188 2388 2577 2588


HPIHC-7437 Elevator Boot - Rear Cover $75Suits 1680 1688 2188 2388 2577 2588


HPIHC-6175 Clean Grain Elevator Boot (Outer) $70Suits 2188 2388 2577 2588 without Yield Monitor (AFS)


Case-IH


HPIHC-1458 Plate – Right Hand Grain Elevator Head $170Suits 2366 2388 2588 Extended Wear Version


HPIHC-1060 Auger Mounting Support for Grain Elevator Head $100Suits 1660 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588


HPIHC-9134 Support – Auger Bearing for Grain Elevator Head $100Suits 1660 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588


HPIHC-1095 Panel – Right Hand – Grain Elevator Head $82Suits 1680 1688 2188 2377 2388 2577 2588


HPIHC-1497 Panel – Left Hand – Grain Elevator Head $95Suits 1680 1688 2188 2377 2388 2577 2588


HPIHC-9940 Cover Rear – Grain Elevator Head $85Suits 1680 1688 2188 2377 2388 2577 2588


HPIHC-1284 Plate – Grain Elevator Head $105Suits 1680 1688 2188 2377 2388 2577 2588

Original Part: 87301284 1321230C1 86984119

HPIHC-1550 Panel – Rear Support – Grain Elevator Head $95Suits 1680 1688 2188 2377 2388 2577 2588


HPIHC-7439 Cover – Front – Grain Elevator Boot $85Suits 1680 1688 2188 2388 2577 2588


HPIHC-7276 Clean Grain Elevator Door $135Suits 1640 1644 1660 1666 2144 2166 2344 2366


HPIHC-7430 Clean Grain Elevator Door $90Suits 1680 1688 2188 2388 2588


HPIHC-2183 Door, Clean Grain Elevator $420Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


HPIHC-1114 Shaft – Upper Unloading Auger Gearbox $495Suits 7088 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240


HPIHC-3219 Shaft – Lower Unloading Auger Gearbox $170 713/16” long, 8/21 TeethSuits 7088 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240


HPIHC-5830 Shaft – Unloading Drive $140Suits 7088 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240

Original Part: 87602267 replaces 86995830

HPIHC-0515 Boot – Lower Clean Grain Elevator $750Suits 7010 7120 7230 8010 8120 8230 9012 9230

Original Part: 84194821 87510515 replaces 87282146

Auger Elevator and Grain Tank Parts continuedHPIHC-8585 Clean Grain Elevator Boot (Side Outer) $110

Suits 1640 1644 1660 1666 1680 1688 2144 2166 2344 2366

Original Part: 1318585C3 NEW

HPIHC-3237 Clean Grain Elevator Boot (Outer) $80Suits 2144 2166 2188 2344 2366 2388 2577 2588 with Yield Monitor (AFS)


HPIHC-2018 Wooden Chain Tension $10Block – Grain Elevator DriveSuits 1440 1460 1640 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2577 2588

Original Part: 582018R1

HPIHC-9247 Clean and Return Grain Elevator $200Drive Shaft 241/8” longSuits 1480 1680 1688 2188 2388


HPIHC-3680

Shaft, Clean Grain Elevator, Upper $250Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


HPIHC-7062

Shaft, Tailings Processor; Upper Blower Drive $85Suits 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230


HPIHC-8377

Sprocket, Elevator Head, Driven 37 Tooth $170Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240

Original Part: 87748377 87586562

HPIHC-3101

Sprocket, Upper Clean Grain Elevator 15 Teeth $45Suits 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


HPIHC-3695

Sprocket, Upper Clean Grain Elevator 23 Tooth $72Suits 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230

Original Part: 87283695 87108702 86975916

HPIHC-1456

Sprocket, Upper Clean Grain Elevator 17 Tooth $40Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240

Original Part: 87731456 87283677 86999488

HPIHC-1552E

Support – Front Grain Elevator Head $75Suits 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588


HPIHC-1097 Cover, Auger Grain Elevator Head $65Suits 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588


HPIHC-9213 Cover, Elevator Head Top $365Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


HPIHC-1154 Panel – Right Hand Grain Elevator Head $90Suits 1660 1666 2144 2166 2344 2366


Case-IH


Auger Elevator and Grain Tank Parts continuedHPIHC-8178 Shaft – Grain Elevator Head 1513/16” long $120

Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 86998178

HPIHC-6252 Boot – Tailing Elevator $330Suits 2344 2366 2377 2388 2577 2588Original Part: 87636252 202814A2

HPIHC-5185 Shaft – Clean Grain and Tailings 267/8” long $286 Elevator Suits 2144 2166 2344 2366Original Part: 195185A1

HPIHC-3531 Shaft Jackshaft Drive $600Suits 2344 before S/N 174399 2366 bfore S/N 253999 2388 before S/N 268799Original Part: 253531A1

HPIHC-3325 Pulley Elevator Jackshaft Drive $255Suits 1420 1440 1460 1480 1620 1640 1660 1680 1644 1666 2144 2166 2188 2344 2366 2388 2377 2577 2588Original Part: 183325C1

HPIHC-7888 Shaft - Unloader Gearbox $1500Suits 7010 8010 7120 8120 7230 8230 9230 7240 8240 9240Original Part: 87107888

Chaffer & Sieve Area Parts

GPIHC-1440

Upper Grain Pan $215Suits 1440 1460 1640 1660 1666 2144 2166 2344 2366Original Part: 192056C1

GPIHC-1480

Upper Grain Pan $260Suits 1480 1680 1688 2188 2377 2388 2577 2588 6088 7088Original Part: 192057C1

HPIHC-2156

Chaffer Pan Support $210Suits 1460 1660 2144 2166 2344 2366Original Part: 1312156C1

HPIHC-1723 Arm – Hanger (Front) Shoe $140Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588 6088 7088Original Part: 1957450C1 87671723

HPIHC-1724 Arm – Hanger (Rear) Chaffer $225Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588 6088 7088Original Part: 1957455C1 87671724

HPIHC-0613 Shaft – Shaker Shoe Drive $675Suits 7010 7120 7230 8010 8120 8230 9012 9230Original Part: 86980613

HPIHC-7184 Shaft – Shaker Shoe Drive $50Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 84037184

HPIHC-9072 Rubber Bush – Upper Shoe Drive $50Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 442446 80442446 89811662 9838354 84459072

HPIHC-9251 Pitman Assembly Shaker Shaft $295Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388 2377 2577 2588Original Part: 1989251C1 87582203

HPIHC-7702 Arm, Shaker Shoe Drive $370Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 87317702

HPIHC-2616 Shaft – Auger Drive 74” long $600Suits 1680 1688 2188 2388 2377 2588Original Part: 1322616C2

HPIHC-2574 Cam – Shaker Shaft - Left Hand $260Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388 2377 2577 2588 6088 7088Original Part: 1322573C1

HPIHC-2574 Cam – Shaker Shaft - Right Hand $260Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388 2377 2577 2588 6088 7088Original Part: 87318100 1322574C1

HPIHC-2561 Arm – Lower Shaker Shoe $105Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 87562561

HPIHC-4041 Arm – Upper Shaker Shoe $115Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240 (278mm centre to centre - pins)Original Part: 87314041

HPIHC-1082 Bushing, Shoe Arm, Upper $110Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 9811082 84097509 84320630

HPIHC-0474 Housing, Bearing; Shaker Shoe Drive $105Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 84320474

HPIHC-6877 Housing, Bearing; Shoe Drive, Upper $18Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 84446877 84097461 84032313

HPIHC-0033 Housing, Shaker Shoe (2 Halves required) $18 eaSuits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 320033 80320033

HPIHC-4571

Arm – Upper Shoe Drive – Left hand $210Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 87314571

HPIHC-4573

Arm – Upper Shoe Drive – Right hand $210Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 87314573

HPIHC-2651 Bushing – Upper Shaker Shoe $10Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 84052651

HPIHC-8222 Bushing – Upper Shaker Shoe 21mm Hole $5Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 80338222

HPIHC-9232 Bushing – Cleaning Shoe Pivot Frame $15Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 429232

HPIHC-4817 Roller -Cleaning Shoe Pivot Frame $38Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 434817 80434817

HPIHC-7503

Shoe, Shaker Frame $2300Suits AFX 8010, 8010Original Part: 87557503

Case-IH


Chaffer & Sieve Area Parts continuedHPIHC-1650

Shoe, Shaker, Upper, Wide Frame $2750Suits 7120 8120 9120Original Part: 87491650 84462359

HPNH-7335 Shoe, Upper Shaker; Narrow $2400Suits 7010Original Part: 87317335

HPIHC-1928 Shaft - Cleaning Shoe Pivot Frame 89/32 long $95Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 9831928 428648

HPIHC-4452

Support, Upper Shoe Drive (LH) $75Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 84334452

HPIHC-4453 Support - Upper Shoe Drive (RH) $75Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240 Original Part: 84334453

HPIHC-0470

Support, Upper Shoe Drive (LH) $210Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 84320470

HPIHC-0472

Support, Upper Shoe Drive (RH) $210Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 84320472

HPIHC-9900 Support – Left Hand Shoe Side $700Suits 1640 1644 1680 1688 2144 2166 2344 2366 2377 2388Original Part: 1979900C5

HPIHC-9901 Support – Right Hand Shoe Side $700Suits 1640 1644 1680 1688 2144 2166 2344 2366 2377 2388Original Part: 1979901C5

HPIHC-9206 Rail – Chaffer Left Hand $575Suits 1640 1644 1660 1666 2144 2166 2344 2366Original Part: 1979206C1

HPIHC-9207 Rail – Chaffer Right Hand $575Suits 1640 1644 1660 1666 2144 2166 2344 2366Original Part: 1979207C1

HPIHC-2452 Rail – Chaffer Left Hand $600Suits 1680 1688 2188 2377 2388 2577 2588 6088 7088Original Part: 1322452C2

HPIHC-2453 Rail – Chaffer Right Hand $600Suits 1680 1688 2188 2377 2388 2577 2588 6088 7088Original Part: 1322453C2 84169439

CBIHC-1644 Chaffer Drive Hanger Bush (Set of 4) $170 setSuits 1640 1644 1666 1680 1688 2144 2166 2188 2344 2366 2388 2577 2588 6088 7088Original Part: 87538599 replaces 1330323C2 87376924 replaces 1979383C1 Contains Qty 2 - 87538599 Qty 2 - 87376924

HPNH-1540 Bush Grain Tray and Shaker Shoe $4 eaSuits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240

CBIHC-1644-1

Shoe Drive Arm Bush (Set of 4) $110 setSuits 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388 2577 2588 6088 7088Original Part: 87538600 replaces1330324C1 Contains Qty 4 - 87538600

CBIHC-1644-2

Chaffer Drive Arm Bush (Set of 12) $360 setSuits 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388 2577 2588 6088 7088Original Part: 87538599 replaces1330323C2 and 878538600 replaces 1330324C1 Contains Qty 6 - 87538599 Qty 6 - 87538600

CBIHC1400

Chaffer Drive Hanger Arm Bushing (Set of 6) $125Suits 1440 1460 1480 1640 1660 1666 1680 short sieve modelOriginal Part: 186597C1 Contains Qty 6 - 186597C1

CBIHC1400-1

Chaffer Frame Bushing $12 eaSuits 1420 1440 1460 1480 1620 1640 1660 1680 short sieve modelOriginal Part: 627555R91

CBIHC1400-2

Shoe Sieve Hanger Arm Bushing (Set of 12) $180Suits 1420 1440 1460 1480 1620 1640 1660 1680 short sieve modelOriginal Part: 627555R91 186597C1 Contains Qty 8 - 627555R91 Qty 4 - 186597C1

HPIHC-2886 Shaft – Beater Drive $990Suits 8010 8120 9120Original Part: 87282886 84252621 47505622

HPIHC-4194 Bevel Gear – Straw Spreader 14 Tooth 7/8”Hex $38Suits 1420 1440 1460 1480 1620 1640 1660 11666 680 2144 2166 2188 2344 2366 2377 2388 2577 2588 6088 7088 (Qty 4 per machine)Original Part: 194194C1 185410C1 87375653

HPIHC-4194B Bearing 7/8”Hex Bore for Bevel Gear $46Suits 1420 1440 1460 1480 1620 1640 1660 11666 680 2144 2166 2188 2344 2366 2377 2388 2577 2588 6088 7088

HPIHC-7402 Sprocket – Unloader Drive – Lower 33/57 tooth $150Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388Original Part: 1347402C1

HPIHC-9795 Sprocket – Driven – Unloading Drive 25 Tooth $90Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240 6088 7088Original Part: 84069795

HPIHC-7639 Sprocket – Idler – Unloading Drive 15 Tooth $50Suits 7010 7120 8010 8120 9120 6088 7088Original Part: 86627639

HPIHC-9770 Sprocket – Unloading Drive 25 Tooth $75Suits 7010 7120 8010 8120 9120 6088 7088Original Part: 84069770

HPIHC-9777 Sprocket – Unloading Drive 38 Tooth $85Suits 7010 7120 8010 8120 9120Original Part: 84069777

Engine Parts

TPIHC-243 Water Pump – 400 Series Motors $250Suits 1440 1460 1480 Suits 400 Series Navistar Engine 1” shaft on pumpOriginal Part: 673162C94 672644C93

TPIHC-780 Water Pump 17mm shaft $150The hub of the original pump will need to be fitted to this replacement pump.Suits 711 725 1420 1440 with 310 358 358DT EnginesOriginal Part: 3132676R93 3138936R92

Case-IH


Engine Parts continuedTPIHC-1263 Water Pump 24mm Shaft $225

Suits 1420 1440 1620 with D358Original Part: 3132676R94

TPCA-1443 Water Pump $195Suits 1620 1640 1644 2144 2344with 5.9 Litre Engine (Cummins)Original Part: J802970 A77703 J286278

TPCA-1444 Water Pump 95mm Impellor $195Suits 1660 1666 1680 1688 21662188 2366 2388 with 8.3 Litre Engine (Cummins)Original Part: J802975 A77704 J800976

HPIHC-2491 Water Pump $250Suits 8010 AFX8010 8120Original Part: 504079715 504102491

HPIHC-1179 Radiator $15006 Row Core 5 Fins/inchSuits 1460 1480 1640 1660 with International EngineOriginal Part: A189213

HPIHC-1730 Radiator $38007 Row Core 5 Fins/inch Suits 1666 2144 2188 to S/N 191483Original Part: 117403A1 1547946C3

HPIHC-4951 Radiator $30007 Row Core 5 Fins/inchSuits 2188 above S/N 191483 2366 below S/N 255700 2388 below S/N 273000Original Part: 194951A1

HPIHC-5361 Radiator $6300Suits 2388 above S/N 273000 7 Row Core 5 Fins/inchOriginal Part: 435361A3

Engine Output Drive PartsHPIHC-8848 Rotor Drive Pulley – Stationary $695

Suits 1620 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388


HPIHC-0054 Rotor Drive Pulley – Variable $980Suits 1620 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388Original Part: 1330054C1

HPIHC-287 Main PTO Drive Shaft 16¼” long $550 Suits 1420 1440 1460 1480 1620 1640 1660 1666 1680 2144 2166 2188 2344 2366 2377 2388 Original Part: 192816C1 192816C2

HPIHC-4429 PTO Drive Plate 137/8” $300 Suits 1620 above S/N 32630 164 above S/N 34705 1644 1660 above S/N 38346 1666 1680 above S/N 45689 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588 Original Part: 184429C2

TPIHC-1446 PTO Drive Plate 14” $300 Suits 1420 1440 1460 1620 below S/N 32630 1640 below S/N 34705 1660 below S/N 38346 1680 below S/N 45688Original Part: 188013C91

Feeder House PartsHPIHC-1440 Top Feeder House Shaft 68” long $260

Suits 1680 1688 2188 2388 below S/N 268799Original Part: 1321440C4

HPIHC-652

Top Feeder House Shaft 573/8” long $275Suits 1420 1440 1460Original Part: 197277C2

HPIHC-653

HPIHC653

HPIHC338

Top Feeder House Shaft 651/4” long $195Suits 1480 (without Rock Trap)


HPIHC-7208

Feeder House Drum Shaft 45” long $115Suits 1680 1688 2188 2377 2388 2577 2588Original Part: 187208C2

HPIHC-0160

Top Feeder House Shaft 617/8” $245Suits 1440 1460 1640 1660 1666 2144 2166 2344 2366Original Part: 1320160C4

HPIHC-6024 Shaft – for Feeder Roller – 533/16” $490Suits 7010 above S/N 202001 7120 7230 7240 8010 above S/N 202001 8120 8230 8240 9120 9230 9240 Original Part: 87646024

HPIHC-1931 Shaft – Feeder House Lower – 701/16” long $525Suits 2144 2166 2188 2344 2366 2388 with Electric Reverser Original Part: 241931A3 239235A3 253531A1

HPIHC-8771 Shaft-Feeder House Lower - 70” long $470Suits 2344 2366 2377 2388 2577 2588with Hydraulic Reverser Original Part: 388771A1

HPIHC-9071

HPIHC653

HPIHC338

Top Feeder House Shaft - 691/8” long $400Suits 2377 2388 above S/N 268800 2577 Above S/N 300001 2588 above S/N 300001 Original Part: 389071A1

HPIHC-1452 Pulley, Jackshaft Drive Feeder House $92514 Spline Centre 15” Outside Diameter Suits 1420 1440 1460 1620 above S/N 32630 1640 1644 1660 1666 1680 below S/N 45689 1688 2144 2166 2188 2344 2366 2388 below S/N 70499Original Part: 191452C2

HPIHC-8967 Pulley, Jackshaft Drive, Feeder House $4006 Spline Centre - 13.2” Outside Diamater Suits 2144 above S/N 173150 2166 above S/N 182025 2188 above S/N 193725 2344 2366 2388 above S/N 268799Original Part: 241930A1 238967C2

HPIHC-8288 Feeder House Drum Arm – Right Hand $195233/8” longSuits 1660 1644 1680 1688 2144 2166 2188 2344 2366 2388Original Part: 1338288C3

HPIHC-8287 Feeder House Drum Arm – Left Hand $195

Suits 1660 1644 1680 1688 2144 2166 2188 2344 2366 2388Original Part: 1338287C3

HPIHC-4574 Feeder House Bottom – 60” long $925Suits 1680 1688 2188 2388 2377 2577 2588Original Part: 1324574C2

HPIHC-4576 Feeder House Bottom – 43½” long $595Suits 1440 1460 1620 1640 1644 1660 1666Original Part: 1324576

HPIHC-4578 Feeder House Bottom - 51¼” long $525Suits 1460 1620 1640 1660 1666 2144 2166 2344 2366 Original Part: 1324578C2

Case-IH


Feeder House Parts continuedHPIHC-4217F Feeder House Bottom - 60” long $750

Suits 2144 2166 2344 2366 Original Part: 1994217C2

HPIHC-0379 Floor, Feeder House; Front $1250Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240

Original Part: 84140379 87393958

HPIHC-0307

Floor, Feeder House; Rear - No Rock Trap $700Suits 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230


HPIHC-2537 Floor, Feeder House; Centre $825Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240

Original Part: 87282537 86995577

HPIHC-2275 Rock Trap Door Kit $395Suits 1680 1688 2188 2377 2388 2577 2588 6088 7088


HPIHC-2449 Arm – for Feeder Roller $210Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240 Original Part: 87660200 87398404 87282449

HPIHC-1396 Shaft – Input, Feeder Drive Forward 1415/16” $51010/42 SplineSuits 1440 to 2388 inclusiveOriginal Part: 191396C1

HPIHC-2003

Shaft, Feed Conveyor $695Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


HPIHC-6812 Shaft, Rock Trap Friction Slip Clutch $475Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


HPIHC-5927 Feeder Reverser - Electric $595Suits 1640 1644 1660 1666 1680 1688 2144 2166 2188 2366 2388Original Part: 245927C9

HPIHC-4200 Bracket, Feeder Roller Tension Adjustment $40Suits 7010 8010 7120 8120 9120


HPIHC-5251 Bracket, Feeder Roller Tension Adjusting $13Suits 7010 8010 7120 8120 9120


HPIHC-8126 Rod, Feeder Roller Tension Adjusting $28Suits 7010 8010


Hydraulic PartsHPIHC-2488 Hydraulic Cylinder – Auger unloading $800

Suits 1640 1660 1680 1644 1666 1688Original Part: 1282488C92

HPIHC-7241 Hydraulic Cylinder – Auger unloading $600Suits 2144 2166 2188 2344 2366 2377 2388Original Part: 87611478 87337241 87597336

HPIHC-6482E Hub – Auxillary Hydraulic Pump Drive $495 Extended Spline & Greasable 3 Bolt HoleSuits 1420 to 2388 inclusive Original Part: 196482C3 87545088

HPIHC-6482 Hub – Auxillary Hydraulic Pump Drive $450 Greasable – Standard Spline 3 Bolt HoleSuits 1420 to 2388 inclusive 6088 7088Original Part: 196482C3 87545088

HPIHC-5084

Hub – Auxillary Hydraulic Pump Drive $500 Greasable - Std Spline 4 Bolt Hole Suits 6088 7088 Original Part: 87545084

HPIHC-0136 Hydrostat Pump Shaft $450 Suits 1460 1480 1660 1680 Before S/N 45689 Original Part: 1980136C1

Rotor PartsCCIHC-20W Rotor Cone – Heavy Duty (including Vanes) $2250

Suits 1420 1620Original Part: 186032C1 87446748

CCIHC-19W Rotor Cone – Heavy Duty (including Vanes) $2600Suits 1440 1460 1640 1660 1644 1666 2144 2166 2344 2366Original Part: 365928A2 1309419C2

CCIHC-84W Rotor Cone – Heavy Duty (including Vanes) $2600Suits 1480 1680 1688 2188 2377 2388 2577 2588Original Part: 437318A1

CCIHC-B Kit to install above 3 $175Rotor Cone. Contains Starwashers, Button Head Cap Screws, Hex Flange Nuts, Flange Hex Bolts, Flange Locknuts

CCIHC-8010W Rotor Cone – (including Vanes) $3300Suits 7120 7230 AFX8010 above S/N 106401 8120 8230 9120 9230 8010 Build Date 9/06 to 9/08 Original Part: 87382439 87369361

HPIHC-7350 Deflector, Transition Cone (LH) $700Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


HPIHC-17351 Deflector, Transition Cone (RH) $900Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


Vanes-20W Complete Vane Set $250Suits 1420 1620

Vanes-19W Complete Vane Set $350Suits 1440 1460 1640 1660 1644 1666 2144 2166 2344 2366Original Part: 321933A1 87328881

Vanes-84W Complete Vane Set $430Suits1480 1680 1688 2188 2377 2388 2577 2588Original Part: 437319A2

HPIHC-8773

Kit, Rotor Cone Vane (Stainless Steel) $695Suits 7088 7010 8010 7120 8120



Case-IH


Rotor Parts continuedCPVK-1440-3 Vane Transport Vane Kit 3/16” $325

Suits 1440 1460 1640 1660 1644 1666 2144 2166 2344 2366Original Part: B94097-316

CPVK-1480-3 Vane Transport Vane Kit 3/16” $450Suits 1480 1680 1688 2188 2388 2588Original Part: 87297171

HPIHC-1297 Rotor Cage Vane Transport $2450Suits 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230

Original Part: 87391297 87393080

HPIHC-4489 Hub – Rotor Drive $90011¾” long, 20 teeth, 13 splineSuits most 1620 to 2388 (check size) Original Part: 1315291C2 1315291C1 184489C1

HPIHC-3439 Rotor – Front Bearing Housing $330Suits 1420 to 2388 inclusive 2388 up to S/N 0276540 and above S/N 0292001Original Part: 253439A3 87474830

HPIHC-1545 Rotor – Front Shaft $600Suits 1420 to 2388 inclusive 2388 up to S/N 0276540 and above S/N 0292001Original Part: 191545C2

HPIHC-1546 Rotor Impellor $700Suits 1440 1460 1640 1644 1666 2144 2166 2344 2366Original Part: 191546C2

HPIHC-5598

Shield, Rotor Impeller $9Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240

Original Part: 87315598 700127072

HPIHC-8846 Hub Assembly – Rotor Drive Pulley $695 17/64” Bore, 12 Spline Suits 1620 to 2388 inclusiveOriginal Part: 188846C1 188846C2 84159818

HPIHC-1453 Hub – Rotor Drive Pulley $575Suits 2344 2366 2377 2388 above S/N 270500 2577 2588 Original Part: 87481453

HPIHC-5307 Rotor Drive Coupling $375Suits 1460 1640 1644 1660 1666 1680 1688 2144 2166 2188 2344 2366 2377 2388 2577 2588Original Part: 1345307C1

HPIHC-1542 Coupling – Splined – U Joint Separator Drive $225Suits 1420 1440 1460 1480 1620 1640 1660 1666 1680 1688 2144 2166 2188 2344 2366 2388 upto S/N 276540Original Part: 191542C2

HPIHC-2570 Shaft, Rotor Gearbox $310Suits 7010 8010

Original Part: 87282570 87280578

HPIHC-1748 Separator Pulley - 4 Track $410Driven 14¾” ODSuits 2377 2388 2577 2588 all without straw ChopperOriginal Part: 371748A2

SteeringTPIHC-201

Stub Axle – Heavy Duty $340Suits 1420 1440 1460 1620Original Part: 71785C2 196334C2

HPIHC-9293 Wheel Hub $300Suits 1460 1480 1660 1666 1680 2166 2188 2344 2366 2388 upto S/N 268799Original Part: 169293C11

HPNH-881 Power Steering Cylinder End $170Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240 Fits power steering cylinder outer ends

Original Part: 84814042 84073454

HPIHC-2201 Rim – Rear Axle $650Suits 2344 2366 2388 2577 2588


HPIHC-5374

Stub Axle $790Suits 1420 to 2366 inclusive


HPIHC-3911 Steering Arm – Left $225Suits 1420 to 2366 inclusive


HPIHC-3912 Steering Arm – Right $225Suits 1420 to 2366 inclusive


HPIHC-6140 Steering Cylinder Ball Joint $195Rear Wheel Assist Only

Suits 1440 to 2388 inclusive


HPIHC-6796 Steering Cylinder Ball Joint $75Suits 1440 to 2366 inclusive - Not Rear Wheel Assist


HPIHC-9774 Tie Rod – Left Hand 45½” long 9 Holes $250Suits1460 to 2388 inclusive


Transmission and Final Drive PartsFD1680 -75 Re-Manufactured Final Drive $4950

75 Tooth Bull Gear Suits 1644 1660 1666 1680 1688 If no exchange add $1000.00 to price $1000 refunded on return of used Final Drive


FD1680-66 Re-Manufactured Final Drive $4000 66 Tooth Bull Gear Suits 1680 & 1480 If no exchange add $1000.00 to price $1000 refunded on return of used Final Drive


FD2188HD Re-Manufactured Final Drive $6500 Heavy Duty 2” Thick Pilot 73 Tooth Suits 2344 Above S/N 174325 2366 above No. 245121 2388 above No. 266792 2588 If no exchange add $1000.00 to price $1000 refunded on return of used Final Drive Original Part: 87392267 1997415C3

HPIHC-245 Drive Axle Coupling with Grease Nipple $120Suits 711 725 1420 1440 1620 1640 1644 (with 3/₈” Hole)

Original Part:184342C2 404862R2

HPIHC-246 Drive Axle Coupling with Grease Nipple $70 12 Spline 23/16” Suits 1460 to 2188 inc lusive

Original Part: 184341C2 401875R1

Transmission and Final Drive Parts continuedHPIHC-8982 Coupling Planetary Drive $120

22 Spline 1¾” Suits 7010 7120 8010 8120 9120Original Part: 84438982 87586665

HPIHC-1549 Drive Axle Coupling with Grease Nipple $120 12 Spline 23/16” Suits 2144 2166 2344 2366 2188 2388 2577 2588Original Part: 248600A1

HPIHC-811 Axle Drive Shaft 273/64” long $315Suits 1460 above S/N 32001 (Left Hand Side) 1660 1666 1688 on Left Hand SideOriginal Part: 1309012C1

HPIHC-812 Axle Drive Shaft 143/32” long $290Suits 1460 above S/N 32001(Right Hand Side) 1660 1666 1688 on Right Hand SideOriginal Part: 402725R2

HPIHC-813 Axle Drive Shaft 321/64” long $200Suits 1480 before S/N 34000 1680 Left Hand or Right HandOriginal Part: 184189C1

HPIHC-846 Axle Drive Shaft 29½” long $550 Left & Right Clamp TypeSuits 2188 2388 2377 2577 2588Original Part: 242846A1

HPIHC-0985 Axle Drive Shaft 34” long Left Hand $29522 Spline 1¾” Suits 8010 8010AFX with 138mm Axle ExtensionOriginal Part: 84440985 84440982

HPIHC-0991 Axle Drive Shaft 415/8” long Right Hand $31022 Spline 1¾” Suits 8010 8010AFXOriginal Part: 84440991

HPIHC-0162 Axle Drive Shaft 261/8” long Left Hand $50022 Spline 1¾” Suits 8010 8120 9120Original Part: 84440162

HPIHC-0165 Axle Drive Shaft 363/8” long Right Hand $55022 Spline 1¾” Suits 8010 8120 9120Original Part: 84440165 84440967

HPIHC-0951 Axle Drive Shaft 38½” long Left Hand $40022 Spline 1¾” Suits 8010 8120 9120Original Part: 84440951

HPIHC-0957 Axle Drive Shaft 48¾” long Left Hand $39022 Spline 1¾” Suits 8010 8120 9120Original Part: 84440957

HPIHC-0974 Axle Drive Shaft 46¾” long Right Hand $45022 Spline 1¾” Suits 8010 8120 9120Original Part: 84440974

HPIHC-5290 Final Drive Pinion $460Suits 2144 2166 2344 2388 2577 2588 6088 7088Original Part: 135290A1

HPNH-9419 Planetary End Reduction Pinion $1951015/16” long, 23 Spline, 11 TeethSuits 7010 7120 8010 8120 9120Original Part: 84069419

HPIHC-9688 Shaft – Differential – With Lock $350173/32” long, 22 and 8 SplineSuits 7010 8010 7120 8120 9120 Original Part: 84069688

HPIHC-1547

2nd & 3rd Sliding Gear 46 teeth 26/19 spline $420Suits 1460 1480 1644 1660 1680 1688 2144 2166 2188 2344 2366 2377 2388Original Part: 530700R1

HPIHC-1548 Gear – Spool – 59, 39 and 27 teeth $975Suits 1460 1480 1644 1660 1680 1688 2144 2166 2188 2344 2366 2377 2388Original Part: 530699R1

HPIHC-6378 Shaft Brake – Output 167/8” long $600Suits 2144 2166 2344 2366 2377 2388 2588 7088Original Part: 236378A1

HPIHC-0169 Hydro Input Shaft 137/16” long $62026 and 21 SplineSuits 1660 1666 1680 1688 2166 2188 2366 2388Original Part: 1980169C1

HPIHC-4217 Transmission Shaft – Input 26 Tooth $545Suits 2144 to 2388 inclusive with 236706A1 or 236707A1 TransmissionOriginal Part: 184217C1

HPIHC-6882 Shaft – Propulsion Drive $1050Suits 7010 8010 8010AFXOriginal Part: 84806882

HPIHC-9687

Shaft, Transmission Output $275Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 84069687

HPIHC-3149 Hydrostat – Pump Shaft $495Suits 2366 2377 2388Original Part: 403149A1

Wind Fan Parts

HPIHC-1177 Fan Vari-sheave Inner (on fan shaft) 12” $220Suits 1420 1440 1460 1480 1620 1640 1660 1680 Adjustable HalfOriginal Part: 1324948C1 185023C93

HPIHC-1178 Fan Vari-sheave Outer (on fan shaft) 12” $220Suits 1420 1440 1460 1480 1620 1640 1660 1680 Fixed HalfOriginal Part: 1324949C1

HPIHC-4853 Shaft-Elevator and Fan Drive 10” long $125Suits 1420 to 2388 inclusiveOriginal Part: 194853C3

HPIHC-1552 Sheave – Cleaning Inner on fan shaft 12” $325Suits 1644 1666 1688 2144 2166 2188 2344 2366 2388 6088 7088Original Part: 1541552C2 84556153

HPIHC-1553 Sheave – Cleaning Outer on Fan Shaft 12” $250Suits 1644 1666 1688 2144 2166 2188 2344 2366 2388 6088 7088Original Part: 87522943 1541553C2

HPIHC-3333 Fan Drive Hub – Fixed Pulley $160Suits 1420 to 2388 inclusiveOriginal Part: 183333C1

HPIHC-1141 Upper Sheave 330mm Diameter $165Fan VarispeedSuits 2366 2377 2388 2577 2588 6088 7088Original Part: 301141A2

HPIHC-3288 Sheave – Fan Variator 11¾” Diameter $75Suits 1420 to 2388 inclusive 300mm diameterOriginal Part: 183288C1

HPIHC-9410 Shaft – Cleaning Fan 57” long $875Suits 7120 8120 9120Original Part: 87107305 87105992 86996428 87589410 87589409

Case-IH


Wind Fan Parts continuedHPIHC-9411 Shaft – Cleaning Fan 67½” long $995

Suits 7230 8010 8120 8230 9120 9230Original Part: 87589412 87589411

HPIHC-3948 Pulley – Fan Drive 101/8” OD $140Suits 1420 to 2388 inclusiveOriginal Part: 193948C1

HPIHC-5918 Pulley – Fan – Jackshaft 14” OD $120Suits 2366 2377 2388Original Part: 295918A1

HPIHC-5286 Hub Assembly – Fan Drive $210Suits 1420 to 2388 inclusive 2577 2588 6088 7088Original Part: 185286C91

HPIHC-1551 Bushing – Cleaning Fan Drive Pulley $27Suits 1640 to 2388 inclusive 2577 2588Original Part: 1541551C1

HPIHC-8215 Cleaning Fan Thrust Bearing $75Suits 1640 to 2388 inclusive 2377 2577 2588 6088 7088Original Part: 168215C92

HPIHC-7001 Fan Blade 725mm $20Suits 1688 2188 2377 2388 6088 7088 7130 7140Original Part: 1347001C1

NEW

HPIHC-7034 Fan Blade 765mm $32Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240Original Part: 86997034 NEW

General

TP-542

Fan Motor Reversible 3 Speed $2305/16” Double Shaft 12 voltSuits 1420 to 1480 inclusiveOriginal Part: 117789C1 1987399C3

HPIHC-5190 Cab Fan Assembly $390(includes Impellors & Motor)Suits 2144 2166 2188 2344 2366 2388Original Part: 355190A1 187764C2 882619957

HPIHC-7380 Blower Assembly, Cab Pressurizer $300Suits 2377 2388 2577 2588 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230Original Part: 87107380 330137A1

HPIHC-5435 Flange Assembly, Fan Drive $50Suits 7010 8010 7120 8120 9120 7230 8230 7240 8240 9240Original Part: 87545435

HPIHC-0293 Gas Strut – Left Cab Door $60Suits 7010 8010 7120 8120 9120 7230 8230 7240 8240 9240Original Part: 84320293

HPIHC-8531 Gas Strut – Rear Upper Panel Left & Right $65Suits 7010 8010 8010AFXOriginal Part: 87108531

HPIHC-2613 Idler Pulley 7” Diameter $55Suits 1620 to 2388 inclusiveOriginal Part: AG2613A 275376 566519R1

LACNHSP12 Sieve Adjuster – Linear Actuator $1250Suits 7010 7110 7230 8010 8120 8230 9120 9230Original Part: 84335407

Genuine

HPNH-2008 Linear Actuator – Sieve Levelling $2000Suits 7010 7120 7230 7240 8010 8120 8230 8240 9120 9230 9240 Original Part: 87522008

HPIHC-2685 Wobble Box - Oil Bath $2200Suits 1010 and 1020 Fronts Original Part: 87502685

HPIHC-0164 Table Auger Drive Sprocket $200 Suits 1010 1020 Rigid FrontsOriginal Part: 87450164

LAN1261800 Hex Coupler - 115mm long 11/8” Hex $120 Suits 810 Fronts

HPIHC-3585 Clutch, A/C Compressor $380Suits 7010 8010 7120 8120 9120Original Part: 403585A1

HPIHC-3463 A/C Compressor with Clutch $770Suits 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230Original Part: 86993463 86992688 317008A2

HPIHC-0052 Glass, Door (LH) $420Suits 6088 7088 7010 8010 7120 8120 9120 7230 8230 9230Original Part: 87510522 87282168 84440387

HPIHC-6692 Knife, Straw Chopper Stationary $6.50 eaSuits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 87106692

HPIHC-9803 Plate, Friction Unloader Drive Pto Clutch $25 eaUnloader PTO, Feeder Gearbox, Beater/Chopper PTOSuits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 84159803 345334A1

HPIHC-6805 Plate, Friction Clutch Feeder House $55Suits 7010 8010 7120 8120 9120Original Part: 87536805

HPIHC-6806 Plate, Internal Separator; Friction Clutch $110Suits 7010 8010 7120 8120 9120Original Part: 87536806

HPIHC-0276

Disc, Friction Transmission & PTO $14Suits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 86990276

HPIHC-5335 Plate, Separator $14Unloader PTO, Feeder Gearbox, Beater Chopper PTOSuits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: 345335A2

HPIHC-80S00F Separator Plate 7” Diameter 2.4mm Thick $75Trans Clutch Pack for Rotor Variator or Header/FeederSuits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: S2080S00F

HPIHC-90S00F Separator Plate 7” Diameter 2.1mm Thick $75Trans Clutch Pack for Rotor Variator or Header/FeederSuits 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240Original Part: S2090S00F

HPIHC-8370

Ratchet, Slip Clutch $55Suits 6088 7088 2144 2344 2166 2366 2377 2388 7010 8010 7120 8120 9120 7230 8230 9230 7240 8240 9240


HPIHC-5006 Reciever / Drier $72Suits 7010 8010 7120 8120 9120


Case-IH


John Deere


Auger and Elevator PartsLAJVU-6620D Vertical Unloading Auger 63¾” long $800

Suits 6620 7720 8820 (including T2 Models)Includes Splined Hubs & Double FlightOriginal Part: AH123929

LAJVU-9400D Vertical Unloading Auger 433/8” long $750Suits 9400 9410 9500 9510 9600 9610 CTS CTSIIIncludes Splined Hubs & Double Flight Original Part: AH124852

LAJVU-9650D Vertical Unloading Auger 30¼” long $750Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS13” FlightOriginal Part: AH164070

LAJVU-9660HUR Auger, Vertical Unloading HUR 315/8” long $1250Suits High Unloading Rate STS Models

Suits 9660STS 9670STS 9760STS 9770STS 9860STS 9870STS

Original Part: AXE12921 AH202956

LAJVU-660HUR Vertical Unloading Auger HUR $1350

Suits S660 S670 S680 S690

Original Part: AXE18070

LAJVU-660D Vertical Unloading Auger- STD Rate $995Suits S660


LAJL-7720 Bin Loading Auger 75” long $500Suits 7720 7720 T2Original Part: AH127729

LAJL-8820 Bin Loading Auger 76½” long $620Suits 8820 8820 T2Original Part: AH127730

HPJD-330 Bin Loading Auger Tube 625/8” long $390Suits 7720 8820 (including T2 Models)Original Part: AH98300

LAJL9400-1H Bin Loading Auger 50” long $475Suits 9400 9410 9500 9510 CTS CTSIIOriginal Part: AH136635

LAJL9650H Bin Loading Auger 571/8” long $900Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS Original Part: AH205897 AH218485 AH154330

LAJL-9770H Bin Loading Auger 57” long 11” Diameter $1100Suits 9770STS 9870STS S670

Original Part: AH230013 AH218258

LAJL-9650HE Bin Loading Auger 65½” long $1050 Extended 12” over original Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: AH205897-E

HPJD-9650

Tube, Grain Tank Loading, 12” Extension $265Suits 9650STS 9750STS 9760STS 9860STS

Original Part: TLJDE9650

TLJD9400-1 Bin Loading Auger Tube 221/8” long $240Suits 9400 9410 9500 9510 CTS CTSII - 8¾” Int Diam Original Part: AH135444

HPJD-9093 Loading Auger Tube 290mm Diameter $1025Suits S660 above S/N 745100 S670 above S/N 745100 9660STS 9760STS 9860STS above S/N 4720714 9870STS

Original Part: AH219093 NEW

HPJD-9094 Loading Auger Tube 275mm Diameter $950Suits 9660STS 9760STS 9860STS 9670STS S660 S670

Original Part: AH219094

LAJA-9400 Grain Tank Cross Auger — Front 112” long $720Suits 9400 9410 9500 9510 CTS CTSII 9650STS 9750STS 9660STS 9760STS 9670STSOriginal Part: AXE18077 AH125645

LAJC-7720 Clean Grain Cross Auger 83½” long $350Suits 7720 7720 T2Original Part: AH107442

LAJC-8820 Clean Grain Cross Auger 94½” long $395Suits 8820 T2 up to S/N 464350Original Part: AH107400

LAJC-8821 Clean Grain Cross Auger 96½” long $415Suits 8820 T2 above S/N 464351Original Part: AH105856

LAJC-9400 Clean Grain Cross Auger 79½” long $475Suits 9400 9410 9500 9510 CTS CTSIIOriginal Part: AH141577

LAJC-9600-1 Clean Grain Cross Auger 92¼” long $525Suits 9600 9610Original Part: AH141576 AH128733

LAJC-9450 Clean Grain Cross Auger 821/8” long $650Suits 9650STS 9750STS 9660STS 9760STS 9770STS 9860STS S670Original Part: AH162154

LAJC-9770 Clean Grain Cross Auger $750Suits 9670STS 9770STS 9870STS S670 S680 S690Original Part: AH219339

HPJD-3897

Hand Hole Cover Auger $ 35Suits 635 640 914 Pickup 922 925 930Original Part: H203897

HPJD-3898 Auger Cover Plate $20 Suits 635 640 914 Pickup 922 925 930Original Part: H203898

HPJD-9391 Door Assembly, Clean Grain + Extra Plate $370 Suits CTS CTSII 9400 9410 9500 9510 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS


HPJD-8426

Lower Clean Grain Elevator Door $150Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS 9410


HPJD-9388

Clean Grain Auger Trough Door $365Suits 9400 9410 9500 9510 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


LAJR-9600-1 Return Grain Cross Auger 106” long $395Suits 9600 9610Original Part: AH146313

LAJR-9650 Return Grain Cross Auger 717/8 “ long $440Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9770STS 9870STS


LAIB-9650F

Grain Tank Cross Auger Front - STD Rate $995Suits CTS CTSII 9400 9410 9500 9510 9650STS 9660STS 9750STS 9760STS S660



John Deere

HPJD-1828 Unloading Auger, Horizontal 60½” long $1195Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


HPJD-715 Bevel Gear For Auger Gear Box 17 Tooth $130Suits 6620 7720 8820 (including T2 Models)Original Part: H86912

HPJD-6294

Bevel Gear Vertical Loading Auger 23 Tooth $330Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-0967 Shaft, Clean Grain Elevator Gearcase $195Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


HPJD-6938 Shaft, Tailings Elevator Top $115Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-9653 Shaft, Vertical Auger Gear Case Drive $350Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


HPJD-5812

Hub Assembly - Unloading Auger $120Suits 9650STS 9750STS 9660STS 9760STS 9860STS


HPJD-5595 Pulley Hub Unloader Drive $200Suits 9650STS 9750STS 9660STS 9760STS 9860STS


HPJD-8075 Sprocket Unloading Auger 19 Tooth $175Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


HPJD-716 Input Shaft For Auger Gear Box $200Suits 6620 7720 8820 (including T2 Models)Original Part: H94703

HPJD-2230 Loading Auger Gear Kit 46 & 53 teeth $525Suits CTSII 9410 9510 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690Original Part: AH162230

HPJD-15152 Sprocket, Countershaft Drive, Unloading 19 Tth $125Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-7557

Sprocket, Tailings Elevator Upper 19 Tooth $70Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-6008

Sprocket, Upper Tailings Auger 30 Tooth $95Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


Auger and Elevator Parts continuedLAIB-9650R Grain Tank Cross Auger Rear - STD Rate $995

Suits CTS CTSII 9400 9410 9500 9510 9650STS 9660STS 9750STS 9760STS S660


LAIB-9660R Grain Tank Cross Auger Rear HUR 112” long $1325Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


LAIB-9660F

Front Cross Auger, High Unloading Rate $1350Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


HPJD-2578 Pulley, Driven; Clean Grain Elevator 13” OD $375Suits 9770STS 9870STS


HPJD-3040

Pulley, Slip Clutch; Tailing Elevator $295Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-8776 Shaft Drive Gear Case, Horizontal Auger $360 Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS

Original Part: CE18776

LAJT-9400 Return Grain Auger - Upper $325 63” long 5” Diameter

Suits 9400 9410 CTS CTSII 9500 9510 9650CTS 9660CTS


LAJT-9600 Return Grain Auger - Upper $375 71¾” long 4¾” Diameter Suits 9600 9610 9650 9660


LAJT-9650 Return Grain Auger Upper 28” long $225Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


LAJHU-1 Unloading Auger, Horizontal 95” long $1100Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


LAJHU-2 Unloading Auger, Horizontal 164” long $1795Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690 ALL HUR


HPJD-0023 Tube, Unloading Auger Outer 15Ft long $1850Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS ALL HUR


LAJHU-3 Unloading Auger Inner 83” long $995Suits 9650STS 9750STS 9760STS 9770STS


LAJHU-4 Unloading Auger, Horizontal 84½” long $1195Suits 9660STS 9750STS 9670STS


HPJD-6292

Splined Coupling, Unloading Auger $55Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS


John Deere


HPJD-7043 Pin, Upper Clean Grain Elevator $110Suits 9650STS 9750STS 9660STS 9760STS 9860STS


LAJGS9650R Shoe Supply Auger 40¾” – Right Hand $200Suits 9650STS to 9870STS inclusive

Original Part: AH146787 (Two Used)

LAJGS9650L Shoe Supply Auger 40¾” – Left Hand $200Suits 9650STS to 9870STS inclusive

Original Part: AH146786 (Two Used)

HPJD-1285

Bevel Gear, Conveyor Auger Drive $55Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690

Original Part: H211285 H174175

HPJD-7215 Drive Gear, Shoe Auger $35Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


BJD-838 Wood Bearing Block $20Shoe Supply Augers

Suits 6620T2 7720 7720T2 8820 8820T2


BJD-839 Wood Bearing Block $11Shoe Supply Auger

Suits 9400 9410 9500 9510 9600 9610 CTS CTSII


HPJD-8602 Elevator, Clean Grain $2700Suits 9650STS 9750STS 9660STS 9760STS 9860STS

Original Part: AXE12250 AH218602 AH207168

HPJD-4760

Hub, Sheave; Clean Grain Elevator, Upper $100Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS


HPJD-1008 Clean Grain Elevator Boot $1200Suits 9650STS 9750STS 9660STS 9760STS 9860STS


HPJD-5070 Sprocket – Grain Tank Cross Auger $16049 Teeth ¾” Chain

Suits 9400 to 9610 inclusive CTS CTSII 9650STS to 9770STS inclusive


HPJD-5080 Sprocket – Vertical Auger Lower Gearcase $17046 Teeth ¾” Chain Suits 9400 to 9610 inclusive CTS CTSII 9650STS to 9770STS inclusive


Chaffer & Shoe (Sieve) PartsHPJD-8675 Sieve Frame Assembly RH $900

Suits 9650STS 9750STS 9660STS 9760STS 9860STS


HPJD-8676 Sieve Frame Assembly LH $900Suits 9650STS 9750STS 9660STS 9760STS 9860STS


Auger and Elevator Parts continuedHPJD-6352 Sprocket, Vertical Auger Lower Gear Case 40 Tth $135

Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690Original Part: AH146352

HPJD-5080

Sprocket, Vertical Auger Lower Gear Case 46 Tth $180Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS Original Part: AH125080

HPJD-6268 Coupling, Horizontal Unloading Auger $110Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STSOriginal Part: H216268

HPJD-3290 Hub Pulley, Unloader Drive $165Suits 9670STS 9770STS 9870STSOriginal Part: H223290

HPJD-1098 Hub, Slip Clutch $85Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STSOriginal Part: H131098

HPJD-5070 Sprocket, Grain Tank Cross Auger 49-Tooth $ 170Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS Original Part: AH125070

HPJD-9934 Shaft – Unloading and Separator Drive $430Suits 9400 9410 9500 9600 9610 9510 CTS CTSII 9650STS to 9870STS inclusiveOriginal Part: H129934

HPJD-0001 Sprocket Grain Tank Cross Auger 60 Tooth $250Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STSOriginal Part: AH140001

HPJD-9352 Jackshaft, Unloader Drive $275Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STSOriginal Part: H219352

HPJD-8445

Shaft, Input, Clean Grain Elevator Gearbox $215Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690Original Part: CE18445

HPJD-6131 Idler Sprocket – Unloading Auger Drive $145Suits 9400 9410 9500 9510 9610 CTS CTSII 9650STS to 9870STS inclusiveOriginal Part: AH206131

HPJD-8278 Pinion - Gear Case Horizontal Unloading Auger $250Suits 9400 9410 9500 9510 9600 9610 CTS CTSII 9650STS to 9770STS inclusiveOriginal Part: CE18278

HPJD-5085 Shaft – Auger Lower Vertical Gear Case $225Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS to 9870STS inclusiveOriginal Part: H215085

HPJD-9935

Sheave, Unloader Drive 2 Groove 8½” OD $295Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9660STS 9760STS 9860STS 9870STSOriginal Part: H129935

John Deere


HPJD-4550 Cam – Inner LH Shoe $115Suits 9400 9410 9500 9510 9600 9610 CTS CTSII 9650STS 9660STS 9750STS 9760STS 9860STS


HPJD-4547 Cam – Outer Left Hd Shoe $60Suits 9650STS to 9870STS inclusive


HPJD-3603 Hub – Sieve & Chaffer Drive $130Suits 9400 to 9610 inclusive CTS CTSII 9650STS to 9870STS inclusive


HPJD-9846 Arm – Swinger Right Hd Chaffer $425Suits 9650STS to 9870STS inclusive

Original Part: AH219846 AH146570 Genuine

JD AH170778

HPJD-9844

Arm – Swinger Left Hd Chaffer $425Suits 9650STS to 9870STS inclusive

Original Part: AH219844 AH146569 Genuine

JD AH170777

HPJD-8230 Link, Sieve To Grain Pan $80Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


HPJD-1186 Shaft – Cleaning Shoe Drive 645/8” long $325Suits 9650STS to 9870STS inclusive

Original Part: H171186 H150804

Engine PartsHPJD-809 Radiator $1750

Suits 7720 7720 T2 8820 8820 T2 Includes CapOriginal Part: AH124728

HPJD-8940 Radiator $1750Suits CTS to S/N 655419 9600 above S/N 640301650mm wide x 860mm highOriginal Part: AH138940 AH169362

HPJD-9364 Radiator $2995Suits 9650STS to S/N 695500 9750STS to S/N 695500 Original Part: AH169364 AH145366

HPJD-8052

Radiator $2995Suits 9650STS above S/N695501 9750STS above S/N695501 9660STS 9760STSOriginal Part: AH208052 AH212547 AH168080

HPJD-9363 Radiator HEAVY DUTY $1875Suits 9500 above S/N 640201 9510 9600 above S/N 640301 9610 CTS above S/N 655420 CTSII 660mm wide x 1080mm high


HPJD-5639 Rotary Screen Pulley $95Suits CTS CTSII 9400 9410 9500 9510 9600 9650STS to 9870STS inclusive


HPJD-0497 Rotary Screen Idler $40Suits CTS CTSII 9400 9410 9500 9510 9600 9650STS to 9870STS inclusive


HPJD-1146 Rotary Screen Shaft 29¾” long $170Suits 9650STS to 9770STS inclusive


Chaffer & Shoe (Sieve) Parts continuedHPJD-2862 Chaffer Shoe Frame Left Hand $2250

Suits 9670STS 9770STS 9870STS


HPJD-2863 Chaffer Shoe Frame Right Hand $1950Suits 9670STS 9770STS 9870STS


SHJD-9400 Chaffer Frame (Top) $1975

9400 to 9560 inclusive CTS CTSII 9650CTS


SHJD-9600 Chaffer Frame (Top) $2050

Improved – with thicker steel and more reinforcement

Suits 9600 9610 9650 9660


SHJDB-9400 Sieve Frame (Bottom) $2050Suits 9400 9410 9500 9510 9650CTS 9560 CTS CTSII


SHJDP-9400 Precleaner Frame $3000Suits 9400 9410 9500 9560 9650CTS 9510 inclusive CTS CTSII


SHJDB-9600 Sieve Frame (Bottom) $1750Suits 9600 9610 9650 9660


SHJDP-9600 Precleaner Frame $2800Suits 9600 9610 9650 9660


HPJD-0046 Pan, Shaker Return; Wide $2250Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS

Original Part: AXE10046 AH149851 AH211408 AXE17166

HPJD-3598 Shaft – Shoe Drive 66” long $550Suits CTS CTSII 9400 to 9510 9650STS 9750STS


HPJD-6032 Shaft, Shoe Drive; Wide $450Suits 9670STS 9770STS 9870STS


HPJD-3375 Shaft – Separator Drive 30½” long $600Suits 9650STS to 9870STS inclusive


HPJD-3602 Cam – Outer Right Hd Shoe $130Suits CTS CTSII 9400 to 9610 inclusive


HPJD-3599 Cam – Outer Left Hd Shoe $125Suits CTS CTSII 9400 to 9610 inclusive


HPJD-4546 Cam – Outer Right Hd Shoe $60Suits 9650STS to 9870STS inclusive


HPJD-4549 Cam – Inner RH Shoe $80Suits 9400 9410 9500 9510 9600 9610 CTS CTSII 9650STS 9660STS 9750STS 9760STS 9860STS


John Deere


HPJD-8575 Sheave, Inner; Feeder House, Hi-Capacity $625Suits 9650STS 9750STS


HPJD-9709 Sprocket – Feeder Chain $55

Suits 9650STS 9750STS 9660STS 9760STS 9860STS


HPJD-6934 Pulley, Fixed Speed; Feeder House 11½”OD $445Suits 9650STS 9750STS 9660STS 9760STS 9860STS


HPJD-8403

Sprocket, Feeder House Drive 26 & 38 Teeth $480Suits 9660STS 9760STS 9860STS


HPJD-3076 Sprocket, Feeder House; Drive 22 & 26 Teeth $300Suits 9660STS 9760STS 9860STS


HPJD-9681 Upper Feeder House Shaft RH Stub $430

Suits CTS CTSII 9400 9500 9600


HPJD-5822 Shield, LH Feederhouse Drive $200Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-7800 Feeder House Floor $1500

Suits 9650STS 9750STS


HPJD-9667

Floor, Feeder House $170Suits 9650STS below S/N 696895 9750STS below S/N 696324


HPJD-4691 Floor Assembly, Feed House $1050Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


HPJD-8352

Feeder House Floor $1595Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-3904

Seal - Feed Plate - Narrow $100Suits CTS CTSII 9400 9410 9500 9510 9650CTS 9660CTS 9650STS 9660STS 9750STS 9670STS 9760STS 9770STS 9860STS 9870STS


HPJD-3734

Feeder Drum Shaft 52¾” long $165

Suits 9400 9410 9500 9510 CTS CTSII 9650STS 9750STS


HPJD-2940 Shaft, Feeder House, Lower (Narrow) 70” long $600Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-6091 Arm – Feeder Idler Shaft $80

Suits 9400 9410 9500 9510 9600 9610 CTS CTSII 9650STS 9750STS


Engine Parts continuedTPJD-5985 WATER PUMP $490

Suits 9500 9600 CTS CTSII

Original Part: RE55985

HPJD-1502 Kit, Water Pump (8.1Ltr Diesel) $375Suits 9650STS 9750STS 9660STS 9670STS

Original Part: RE521502 R503501 R119795

HPJD-0194

Kit, Water Pump - Tier 2 or Tier 3 $325Suits 9660STS 9670STS 9770STS S660 S670

Original Part: RE530194 RE523828 RE530194

HPJD-1503 Water Pump; High-Flow $600Suits 9660STS 9750STS 9760STS

Original Part: RE521503 RE509599 RE532595

Engine Output Drive PartsHPJD-5557 Shaft, Rotary Screen Drive 59” $185

SUits 9860STS 9870STS


HPJD-9058 Sheave, Reel Pump Drive; Hi-Capacity $460Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-0900 Idler – Feed Accelerator/Secondary Jackshaft $95Suits 9650STS to 9870STS inclusive


HPJD-4618

Shaft, Primary Jackshaft $1150Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


Feeder House PartsHPJD-9118 Shaft, Engine Gear Case $795



HPJD-3514 Shaft, Reverser Gearbox $750Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-4587 Sheave – Feeder House $585Suits 9660STS 9760STS 9860STS


HPJD-6332 Inner Sheave, Feeder House, $695Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-1417 Sheave, Feeder House $475Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-1579 Inner Sheave, Feeder House 12½” long $630Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-1415 Sheave, Feeder House; Outer, High Capacity $485Suits 9650STS 9750STS


John Deere


Feeder House Parts continuedHPJD-2476 Arm - Feederhouse Drum $300



HPJD-3921 Arm - Feederhouse Drum $375Suits 9660STS 9760STS 9860STS


HPJD-8367 Arm, Feeder Roller $120Suits 9660STS 9760STS 9860STS


HPJD-6296 Arm – Feeder Drum $135



HPJD-8397 Idler Arm – Feeder House $215



HPJD-1567 Upper Feeder House Shaft 737/8” long $800Suits 9600 above S/N 645301


HPJD-6576 Upper Feeder House Shaft 63” long $1075

Suits 9410 9510 9650STS 9750STS 9660STS 9760STS 9860STS CTSII


HPJD-3850 Shaft, Feeder House, Upper 63” long $850Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-3950 Bearing Housing $195Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690

Original Part: H203950 H75329 H99149

HPJD-7482

Bracket, Upper Feederhouse Shaft $40Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


HPJD-8671 Shaft – Feeder Roller 52½” long $160



HPJD-3076 Sprocket – Feeder House Drive $295 22/26 Tooth 21 Internal Spline



HPJD-9634 Sprocket – Feeder House $95



HPJD-4011 Shaft- Feeder House – Lower 70¾” long $730



HPJD-5454 Shaft – Feeder House $225

Suits 9400 9410 9500 9510 9600 9610 CTS CTSII 9650STS to 9870STS inclusive


HPJD-1813 Pin – Pinion Gear – Feeder House $50

Suits 9650STS to 9770STS inclusive

Original Part: Z61813

HPJD-2714 Gear – Pinion – Feeder House 14/24 Teeth $425

Suits 9650STS to 9770STS inclusive

Original Part: Z12714

HPJD-1692 Shaft, Deck Plate Indicator $50Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690

Original Part: R111692

HPJD-7985 Reverser Gearbox Shaft 18” long $560Suits 9650STS 9750STS 9660STS 9760STS 9860STS Original Part: H177985

HPJD-0530 Guide, Chain; Feeder House - Wooden $55Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS


HPJD-8522 Gear – Pinion – Feeder House 14/29 Teeth $290Suits 9660STS to 9870STS inclusive

Original Part: CE18522

HPJD-7015 Gear – Input – Feeder House $550Suits 9660STS 9670STS 9760STS 9770STS 9860STS


HPJD-7024 Main Hydraulic Pump $950Suits 9410 9500 9510 9600 9610CTS CTSII


Hydraulic PartsHPJD-9588 Cooler Hydraulic $950

Suits 9400 9500 9600 9510 9610 CTS CTSII


HPJD-3229 Hydraulic Cylinder Reel Lift For and Aft $425Suits 900 Series Flex 900 Series Rigid 925D – 936D Draper Fronts Left Side Only


SteeringHPJD-4612 Power Steering Cylinder End $135

Suits CTS CTSII 9400 9410 9500 9510 9600 9610Original Part: AH204612

HPJD-5129 Rear Rim – 14” x 26” $875Suits JD9500 to 9860STS inclusiveOriginal Part: AH205129

HPJD-5654 Left Hand Stub Axle $900Suits CTS CTSII 9400 9500 9510 9600 9610Original Part: AH125654

HPJD-5655 Right Hand Stub Axle $900Suits CTS CTSII 9400 9500 9510 9600 9610Original Part: AH173844 AH125655

John Deere


HPJD-1111

Spindle, Rear Axle $875Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


Walker Parts

BJW-614 Walker Blocks (1 Set of 2 Halves) $40Suits Front or Rear 1½” CrankSuits 7720 8820 7720 T2 8820 T2Original Part: AH92589 AH119614

BJW-677 Walker Block (1 Set of 2 Halves) Wood $45Suits 9400 above S/N 6351819500 above S/N 636926 9600 above S/N 936084Original Part: H140677

BJW-820 Walker Block (1 set of 2 Halves) Wood $60Replaces Aluminium Blocks – 39.8mmSuits 9400 above S/N 6501019500 above S/N 650201 95109600 above S/N 650301 9610Original Part: AH168158 H147747 H147748

BJW-821 Walker Block (1 Set of 2 Halves) $75Slightly Undersize to suit Worn Shafts36.5mm – Replaces Aluminium BlocksSuits 9400 above S/N 6501019500 above S/N 650201 95109600 above S/N 650301 9610

BJW-217 Walker Block (1 Set of 2 Halves) $4038mm Lug TypeSuits Late 955 975 1075 Original Part: AZ31217

Wind Fan PartsHPJD-432

Vari Speed Sheave $230Inner (on Fan Shaft)Suits 7720 8820 7720 T2 8820 T2Original Part: AH100009 AH173726

HPJD-433 Vari Speed Sheave – Outer $325(On Fan Shaft)Suits 7720 8820 7720 T2 8820 T2 Original Part: H97600

HPJD-434 Vari Speed Sheave Inner $150(On Secondary Countershaft)Suits 7720 8820 7720 T2 8820 T2Original Part: H93503

HPJD-435 Vari Speed Sheave Outer $150(On Secondary Countershaft)Suits 7720 8820 7720 T2 8820 T2Original Part: H100794

HPJD-6016 Sheave – Inner – Fan Drive Standard Speed $260Suits 9660STS 9760STS 9860STSOriginal Part: H206016

HPJD-7219 Sheave - Inner Driver 101/8 Diameter $450Suits 9400 above S/N 670101 9650CTS below S/N 690464 9650STS below S/N 691595 9750STS below S/N 691222Original Part: AH157219

HPJD-7496 Sheave Sheave 157/8 Diameter $340Suits CTS 9400 Below S/N670100 9500 below S/N 670200 9600 below S/N 670300Original Part: AH127496

Transmission and Final Drive Parts

FD9650L Re-Manufactured Final Drive (LH) $8500Heavy Duty Suits 9650STS 9660STS 9670STS 9750STS 9760STS 9860STS 9770STS 9870STS S670 with different pinionIf no exchange add $1000 $1000 refunded on return of used Final DriveOriginal Part: AH224517

FD9650R Re-Manufactured Final Drive (RH) $8500 Heavy Duty Suits 9650STS 9660STS 9670STS 9750STS 9760STS 9860STS 9770STS 9870STSS670 with different pinion If no exchange add $1000 $1000 refunded on return of used Final DriveOriginal Part: AH224518

HPJD-7014

Final Drive Pinion 11 Tooth $200Suits 9400 9410 9500 9510 9600 CTS IIOriginal Part: H157014

HPJD-7722 Final Drive Pinion 10 Tooth $550Suits 9650STS to 9870STS inclusive


HPJD-675 Final Drive Coupler, 23 Spline $55Suits 7720 to 8820T2Original Part: H106283

HPJD-5510 Final Drive Coupler $55Suits 9400 to 9610 inclusive CTS CTSII 9650STS to 9750STS 9660STS 9670STS 9760STS 9770STS 9870STSOriginal Part: H165510

HPJD-6465 Shaft, Axle Spacer Drive (105Mm) $85Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-5665 Axle Drive Shaft Right Hand 17¾” long $500Suits 9400 9410 9500 9510 9650STS 9750STS 9660STS 9760STS 9770STS 9870STSOriginal Part: H165665

HPJD-5666 Axle Drive Shaft Left Hand 285/48” long $535Suits 9400 9410 9500 9510 9650STS 9750STS 9660STS 9760STS 9770STS 9870STSOriginal Part: H165666

HPJD-3660

Shaft – Hydrostatic Pump 11¼” long $350Suits 9400 to 9610 inclusive CTS CTSIIOriginal Part: AH133660

HPJD-6818

Shaft, Hydro Drive Motor 123/8” long $995Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS

Original Part: AZ56818

HPJD-5662 Shaft, Ring & Pinion – Final Drive $325 18 Tooth, 300mm Long Suits CTS CTSII 9400 to 9610 inclusive 9650STS to 9870STS inclusiveOriginal Part: H165662

HPJD-5663 Shaft 15¾” long $375 Suits CTS 9400 to 9610 inclusive 9650STS to 9870STS inclusiveOriginal Part: H165663

HPJD-5664 Shaft, Ring & Pinion Final Drive 59” long $290Suits 9400 9410 9500 9510 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


John Deere


Wind Fan Parts continuedHPJD-7535 Fan Sheave – Inner 13” Diameter $290

Suits 9650STS above S/N 691596 9750STS above S/N 691122 9660STS 9760STS 9860STSOriginal Part: AH167535

HPJD-7534 Fan Sheave – Outer $315Suits 9650STS above S/N 690465 9660STS above S/N 715411 9670STS 9750STS above S/N 691223 9760STS above S/N 715411 9770STS 9870STSOriginal Part: AH167534

HPJD-1051 Fan Sheave – Inner 330mm Diam Std Speed $450Suits 9650STS 9750STS 9670STS 9770STS 9870STS S670Original Part: H161051

HPJD-4179 Fan Sheave – Outer 330mm Diameter $5959650STS 9750STSOriginal Part: AH204179

HPJD-53040 Fan Sheave – Outer 330mm Diameter $300Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650CTSOriginal Part: AH153040

HPJD-2190 Fan Sheave – 330mm Diameter $300Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650CTSOriginal Part: H152190

HPJD-9175 Fan Thrust Bearing $70Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650CTS 9650STS 9660CTS 9660STS 9750STS 9670STS 9760STS 9770STS 9860STS 9870STSOriginal Part: AH229175

HPJD-8420

Fan Blade $110Suits 9650STS 9750STS 12 per MachineOriginal Part: H158420

HPJD-6345 Fan Blade 523/8“ long 1330mm $1009660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 above S/N 745100 S670 above S/N 745100 S680 above S/N 745100 S690 above S/N 745100 12 per MachineOriginal Part: H206345

HPJD-3376

Fan Drive Shaft 655/8” Long $675Suits 9650STS above S/N 691956 9750STS above S/N 691223 9660STS 9760STS 9770STS 9860STS 9870STSOriginal Part: H173376

HPJD-8384 Shaft, Fan Drive Speed 10” long $85Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


GeneralHPJD-8925 Blower Pressuriser Motor $195

Suits 9400 to 9610 CTS CTSII 9650STS 9750STS 9660STS 9760STS Original Part: AH167731

HPJD-8926 Evaporator Heater Motor $260Suits 9400 9410 9500 9510 9600 9610Original Part: AH128926

HPJD-4697

Knife Drive $2800Suits 925 930 936 Draper frontsOriginal Part: DE19786

HPJD-4714

Knife Drive - German Made $2800Suits 600 Flex & Rigid Auger Fronts (Not inc. Pulley)Original Part: DE19785

HPJD-1086

Knife Drive - German Made $4000Suits 635 and 640 Draper Fronts (Not inc. Pulley)

Original Part: DE21086

HPJD-1481

Knife Drive Wobble Box $1400Suits 200 & 900 Series Rigid Fronts (No Snout)Original Part: AE41481

HPJD-7735 Knife Drive Repair Kit for HPJD-1481 $975Suits 200 and 900 series Rigid Fronts

Original Part: AE57735

HPJDH-1481H

Wobble Box Housing $390 Suit HPJD1481 200 & 900 Series Rigid Fronts Original Part: AE35149

HPJD-6402

Knife Drive Wobble Box Heavy Duty $2400 Suits 900 Series Rigid + Flex above S/N 685401 4 Spline Output Shaft Original Part: AH206402

HPJD-5152 Snout suits HPJD-1481 $140200 & 900 Series Rigid Fronts Original Part: AE35152

HPJD-71003

Knife Drive Repair kit for HPJD-6402 $1150 Suits 900 Series Front 2000 - 2002 above S/N 685401

HPJD-2502 Drive Arm suit HPJD-6402 $600Suits 900 Series Rigid & Flex above S/N 685401Original Part: E92502

HPJD-4485

Alternator, Bosch - 95 Amp $300Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS

Original Part: TY24485

HPJD-1398

Alternator, Presto - 185 Amp $1150Suits 9650STS 9750STS 9660STS 9760STS 9860STS


HPJD-7691 Alternator - 200 Amp $525Suits 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690

Original Part: AXE17691, Replaces AH229090, RE210793, A-RE555751, SE501826, SE502688

HPJD-9875

Compressor, Denso Style With Clutch $825Suits 9410 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-11387 Receiver/Drier $120Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


John Deere


General continuedHPJD-6648 Windscreen $995

Suits 9400 to 9610 inclusive 9650STS 9660STS9750STS 9760STS 9770STS 9860STS 9870STSOriginal Part: AH166648

HPJD-1342 Lever, Handle - Elevator Doors $33Suits CTS 9400 to 9600 Series 9650STS to 9870STS S660 to S690


HPJD-7647

Bracket, Latch $15Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690


HPJD-0309 Plate, Clutch Drive (4 Per Set) $58Used on Separator Drive, Wet Clutch & Pump Drive Shaft

Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS

Original Part: T70309

HPJD-2676

Jackshaft, Straw Chopper & Discharge Beater $255Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9870STS


HPJD-6975 Pulley, Discharge Beater & Chopper Driver $575Suits 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-4017

Clutch Disc $55Suits 9770STS 9870STSOriginal Part: RE294017

HPJD-5490 Clutch Disc Separator Transmission & PTO $60Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS


HPJD-8265

Slip Clutch $20Suits CTS CTSII 9400 9410 9500 9510 S660 S670 S680 S690


HPJD-7909 Sprocket, Idler; 15 Teeth / 60 Chain $35Suits CTS CTSII 9400 9410 9500 9510 9600 9610 9650STS 9750STS 9660STS 9760STS 9860STS 9670STS 9770STS 9870STS S660 S670 S680 S690

Original Part: AE27909

HPJD-8597

Gas Strut $85Suits 9400 to 9610 inclusive CTS CTSII 9650STS 9750STS 9660STS 9670STS 9760STS 9770STS 9860STS 9870STSOriginal Part: AH128597

HPJD-4069 Blower Motor $195Suits 9670STS 9770STS 9870STS


HPJD-1087

Bushing $11Suits CTS CTSII S660 S670 S680 S690


HPJD-4450 Flanged Idler 2B x 8¾” $85Suits 6620 to 8820T2 inclusive 9410 to 9610 inclusive Original Part: AH94450 AH128598 AH143033 AH161391

HPJD-9549

Idler – Rotary Screen $60Suits all 9650STS – 9870STS inclusiveOriginal Part: AH169549

HPJD-5276 Flanged Idler $75Suits 6620 to 8820T2 inclusive 9410 to 9610 inclusive 9650STS to 9870STS inclusive DFI-144Original Part: AH85276

HPJD-8097

Belt Tensioner $210Suits 9650STS 9750STS 9660STS 9760STS 9670STS 9770STS

Original Part: RE518097

HPJD-1010

Shaft – Rear Beater $495Suits 9650STS to 9870STS inclusiveOriginal Part: H161010

HPJD-8386 Shaft – Front Beater 65” long $425Suits 9650STS to 9870STS inclusiveOriginal Part: H158386

LBFJD-9650FH Feed Accelerator Wear Plate $22Suits 9650STS to 9870STS inclusiveOriginal Part: H165407

HPJD-9992 Electric Actuator 12” Stroke - Chopper $1350Suits 9650STS to 9870STS inclusive operates to position ChopperOriginal Part: AH209992

HPJD-SCD936 Clutch Assembly - Draper Front $500Suits All Draper platforms To avoid damage to your drive line

HPJD-5004 Straw Chopper Blade Kit - Straight (Set of 8) $60Double Bevel EdgeSuits 9500 9510 9600 9610 9650STS 9660STS 9750STS 9760STS 9860STS CTS CTSIIOriginal Part: AH205910 H156098

HPJD-15004 Straw Chopper Blade - Stationary $10Suits 9500 9510 9600 9610 9650STS 9750STS 9760STS 9860STS CTS CTSIIOriginal Part: H215004

HPJD-5909 Straw Chopper Blade Kit - Winged $904 left hand 4 right hand - Winged TypeSuits 9500 9510 9600 9610 9650STS 9660STS 9750STS 9760STS 9860STS CTS CTSIIOriginal Part: AH205909 H142141

HPJD-5940 Straw Chopper, Blade Kit Scoop Type $200Set of 8 - 4 left, 4 right for ends of rotor



HPJD-5937 Straw Chopper Blade Kit - Winged $150Set of 8 - 4 left, 4 right

Suits 9670STS 9770STS 9870STS S690

Original Part: AH225937 H218169 H218170

HPJD-0255 Straw Chopper Blade Kit - Winged $300Set of 8 - 4 left, 4 right

Suits S660 S670 S680 S690

Original Part: KXE10255 KXE10304

HPJD-0256 Straw Chopper Blade Kit - Straight (Set of 8) $250Double Bevel Edge

Suits S660 S670 S680 S690

Original Part: KXE10256

New Holland


HPNH-8346 Bottom Auger Tailing Elevator $1265Suits CR970 CR9070 CR9080 CX840 CX860 CX880 CX8070 CX8080


HPNH-2959 Tailing Elevator Auger (RH) 64” long $950Suits CR940 CR960 CR970 CR980 CR9040 CR9060 CR9070 CR9080


HPNH-2961 Tailing Elevator Auger (LH) 64” long $950Suits CR940 CR960 CR970 CR980 CR9040 CR9060 CR9070 CR9080


HPNH-8345 Auger Return/Tailing 79” long $975Suits CR940 CR9040 CX8040


HPNH-0769 Bottom Tailing Elevator Auger 89” long $875Suits CR960 CR9060


HPIHC-0339 Auger; Horizontal Unloading, 18 Ft $1800Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX8070 CX8080 CX8090


HPIHC-0158

Horizontal Unloading Auger Tube 18 Ft. $2530Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080

Original Part: 87470158 87284775

HPIHC-9509 Auger, Horizontal Unloading 17ft 8” long $2250Suits CR9040 CR9060 CR9070

Original Part: 87729509 87575221

HPIHC-1114 Shaft – Upper Unloading Auger Gearbox $495Suits all CR and CX Models


HPIHC-3219 Shaft – Lower Unloading Auger Gearbox $170 713/16” long 8/21 TeethSuits all CR and CX models


HPNH-260 Bevel Gear – Bubble up Auger Gear Box $450Suits TR70 TR86 TR87 TR88


HPNH-7827 Shaft – Bubble up Gear Box $875Suits TR89 TR98 TR99


LANR-71 Repeat Cross Auger $400Suits TR70 TR75 TR85 TR86 TR87 TR88

Original Part: 86531534 87578883

HPIHC-5223 Unloading Auger Extension 3Ft long $925Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CR9080 CX840 CX860 CX880 CX8070 CX8080 CX8090

Original Part: 87575223 87657822 87575225

HPIHC-0154 Tube; Unloading Auger Extension, 3 Ft. $975Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090

Original Part: 87470154 87354454

Auger PartsLAIVU-8010 Vertical Unloading Auger 47¼” long $950

Suits CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CX860 CX880 CX8070 CX8080 CX8090

Original Part: 84447940 87756536 87733266

HPNH-0302 Bubble Up Auger Base $1230Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090


HPNH-1622

Bubble Up Auger Tube 34” long $852Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX8070 CX8080 CX8090


HPNH-7518 Bubble Up Auger 43” long $1200Suits CR940 CR960 CR970


HPNH-3749 Lower Bubble Up Auger 38” long $1050Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX8070 CX8080 CX8090

Original Part: 87283749 84447514 87283743

HPNH-3757 Upper Bubble Up Auger 42½” long $995Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090

Original Part: 87283757 84438582 87283754

HPNH-3765 Bubble Up Auger 27½” long $970Suits CR940 CR960 CR970 CR9040 CR9060 CX840 CX8070

Original Part: 87283765 84438683

LANS-70 Bin Loading – Bubble up Auger 84¼” long $600Suits TR70 TR75 TR85 TR86 TR87 TR88 (15 Spline)


LANS-95 Bin Loading – Bubble up Auger 88¼” long $1125Suits TR95 TR96 TR97 TR98 (15 Spline Only)

Original Part: 86550393 80766787

LANS-98 Bin Loading – Bubble up Auger 87½” long $1625Suits TR89 TR98 above S/N 563258 with 1” 10 Spline Hub


HPNH-1549 Bottom Grain Elevator Auger 95” long $975Suits CR940 CR960 CR9040 CR9060


HPNH-1551 Bottom Grain Elevator Auger 100” long $975Suits CR970 CR9070 CR9080 CX840 CX850 CX880 CX8080 CX8090


LANC-71 Clean Grain – Auger 1” Shaft 69½” long $725Suits TR85 TR86 TR87 TR88


LANC-85 Clean Grain Cross 11/8” Shaft 69½” long $500Suits TR85 TR86 TR87 TR88


LANC-95 Clean Grain Auger 85” long $67513/₈ “ Sprocket

Suits TR96 TR97 TR98 TR99 TR89

Original Part: 86501034 80703734


Auger Parts continuedHPIHC-1650

Shoe, Shaker, Upper, Wide Frame $2750Suits CR970 CR980 CR9070 CR9080

Original Part: 87491650 84462359

HPIHC-2623 Unloading Auger Extension Bearing Holder $52Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX8070 CX8080 CX8090


HPNH-7335 Upper Shaker Shoe Narrow $2400Suits CR940 CR960 CR9040 CR9060


LAIB-8010 Auger, Grain Tank Bottom Front 10 Ft long $800Suits (CR940 CR960 CR970 - Front only) (CR9040 CR9060 CR9070 - Front and Rear) (CX860 CX880 CX8070 CX8080 CX8090 - Front only)

Original Part: 87280345 84075319

LAIB-8010R Auger, Grain Tank Bottom Rear 1207/8” long $825Suits (CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090 Rear) (CR9040 CR9060 CR9070 Front)

Original Part: 87280343 84075320

Chaffer and Sieve Area PartsHPIHC-2561 Arm – Lower Shaker Shoe $95

Suits CR9040 CR9060 CR9070 CR8070 CR8080 CX8090


HPNH-1540 Bush Grain Tray and Shaker Shoe $4 eaSuits TR86 87 88 96 97 98 89 99 NH8060 8080 TX34 TX64 TX66 TX68 CX840 CX860 CX880 CX8070 CX8080 CX8090 CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070

Original Part: 84000052 398810 190068 620803

HPIHC-7702 Arm, Shaker Shoe Drive $370Suits CR940 CR960 CR970 CR9040 CR9060 CR9070


HPIHC-4041 Arm – Upper Shaker Shoe $115Suits CR models to CR9090


HPIHC-4571

Arm – Upper Shoe Drive – Left hand $210Suits CR models to CR9090


HPIHC-4573

Arm – Upper Shoe Drive – Right hand $210Suits CR models to CR9090


HPIHC-1082 Bushing, Shoe Arm, Upper $110Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090


HPIHC-0474 Housing, Bearing; Shaker Shoe Drive $105Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090


New Holland

HPIHC-6877 Housing, Bearing; Shoe Drive, Upper $18Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090

Original Part: 84446877 84097461 94032313

HPIHC-0033 Housing, Shaker Shoe (2 Halves required) $18Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090

Original Part: 320033 80320033

HPIHC-4817 Roller, Cleaning Shoe Pivot Frame $38Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090


HPIHC-0470 Support, Upper Shoe Drive (LH) $210Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090


HPIHC-4452 Support, Upper Shoe Drive (LH) $75Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090


HPIHC-4453 Support Upper Shoe Drive (RH) $75

Suits all CR & CX Models


HPIHC-0472

Support, Upper Shoe Drive (RH) $210Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090


HPIHC-7184 Shaft – Shaker Shoe Drive $50Suits all CR and CX models


HPIHC-2651 Bushing – Upper Shaker Shoe $10Suits all CR and CX models


HPIHC-8222 Bushing – Upper Shaker Shoe 21mm Hole $5Suits all CR, CX and TX models


HPIHC-9072 Rubber Bush – Upper Shoe Drive $50Suits all CR and CX models

Original Part: 442446 80442446 89811662 9838354 84459072

HPIHC-9232 Bushing – Cleaning Shoe Pivot Frame $15Suits all CR, CX and TX models


HPIHC-4817 Roller -Cleaning Shoe Pivot Frame $38Suits all CR, CX and TX models


HPIHC-1928 Shaft -Cleaning Shoe Pivot Frame 8¼” long $95

Suits all Cr and CX models TX36 TX66 TX68


New Holland


Chaffer and Sieve Area Parts continuedHPIHC-9795 Sprocket – Driven – Unloading Drive 25 Tooth $90

Suits all CR & CX Models


HPIHC-7639 Sprocket – Idler – Unloading Drive 15 Tooth $50Suits all CR & CX Models


HPIHC-9770 Sprocket – Unloading Drive 25 Tooth $75Suits all CR & CX Models


HPIHC-9777 Sprocket – Unloading Drive 38 Tooth $85Suits all CR & CX Models


Engine PartsHPIHC-2491 Water Pump $250

Suits CR9070

Original Part: 504102491 504079715

Engine Output Drive PartsHPNH-1357 Separator Clutch Plate $195 ea

2 per Harvester

Suits TR70 TR85 TR86 TR87 TR88 TR89 TR95 TR96 TR97 TR98 TR99

Original Part: 9820504 80251106

Transmission and Final Drive PartsHPIHC-9687

Shaft, Transmission Output $275Suits CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090


HPIHC-0165 Shaft, Drive, Transmission Half (LH) $550Suits CR970 CR980 CR9070 CR860 CX880 CX8080 CX8090

Original Part: 84440165 84440967

HPNH-1400 Brake Disc (26 Spline) $130Suits 8060 8070 8080 TX34 TX36 TR85 TR86 TR87 TR95 96 97

Original Part: 89512098 89508667 80381512

HPJD-675 Drive Axle Coupling 23 Spline $55Suits TR70 TR99 TR85 before S/N 308085


HPNH-1166 Drive Axle Coupling 22 Spline $105Suits TR85 TR95 TR86 TR87 TR88 TR89 TR99 TX34 TX64 TX66 TX68 8060 8070 8080

Original Part: 445956 80445956 381823

HPIHC-8982 Planetary Drive Coupling $125Suits all CR and CX models


HPNH-9419 Planetary End Reduction Pinion $3201015/16” long, 23 Spline, 11 Teeth

Suits CR940 CR960 CR9040 CR9060 CX820 CX840 CX8070


HPIHC-0985 Axle Drive Shaft 31½” long Left Hand $29522 Spline 1¾” Suits CR960 CR970 CR980 CR9070 CR9080 CX860 CX8070 CX8080 CX8090

Original Part: 84440985 84440982

HPIHC-0991 Axle Drive Shaft 415/8” long Right Hand $31022 Spline 1¾” Suits CR920 CR940 CR960 CR970 CR9040 CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8080


HPIHC-0162 Axle Drive Shaft 261/8” long Left Hand $50022 Spline 1¾” Suits CR970 CR980 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090


HPIHC-0165 Axle Drive Shaft 363/8” long Right Hand $55022 Spline 1¾” Suits CR970 CR980 CR9070 CX840 CX860 CX880 CX8070 CX8080 CX8090

Original Part: 84440165 84440967

HPIHC-0951 Axle Drive Shaft 38½” long Left Hand $40022 Spline 1¾” Suits all CR and CX models


HPIHC-0957 Axle Drive Shaft 48¾” long Left Hand $39022 Spline 1¾” Suits all CR and CX models


HPIHC-0974 Axle Drive Shaft 46¾” long Right Hand $45022 Spline 1¾” Suits all CR and CX models


HPIHC-9688 Shaft – Differential – With Lock $350173/32” long, 22 Spline

Suits all CR and CX models


HPIHC-6882 Shaft – Propulsion Drive $1050Suits all CR and CX models


SteeringHPNH-881 Tie Rod End – Left Hand & Right Hand $170

Suits all CR and CX models - Fits Power Steering Cylinder Ends


HPNH-2906 Tie Rod End $95Suits CR920 CR940 CR960 CR970 CR9040,CR9060 CR9070 CX840 CX860 CX880 CX8070 CX8090

Fits ends of long tie rod and inner ends of lower steering cylinder Original Part: 84442906

HPNH-0679 Tie Rod End $95Suits 1530 1540 1545 1550 8040 8060 8080 TX34


Wind Fan PartsHPNH-1145 Fan vari sheave suits inner and outer $120

Suits 8060 8070 8080


HPNH-1172 Fan sheave Outer Driven $290Suits TR70 TR85



Knife Drive and PartsHPNH-1394 Wobble Box (no arm) with pulley $1925

Suits 806 (after modification) 971 972 973

Fronts with Tapered Splined Shaft for pulley


HPNH-1914 Wobble Box (no arm, no pulley) $1725Suits 71C 72C 73C 74C & CIH 2010 2020

with tapered shaft for pulley


HPNH-1806 Pulley suit HPNH1914 Wobble Box $150Suits 71C 72C 73C 74C & CIH 2010 2020

Tapered Centre on Pulley


HPNH-1130 Wobble Box heavy duty with arm (no pulley) $1550Suits 705 805 Fronts on 8040 8060 8080


HPNH-1539 Knife Drive Arm (12 Spline) $135Suits 971 973 71C 72C 73C 74C

Original Part: 87389510 replaces 84017247

HPNH-0120 Rocker Fork – suits HPNH-1394 Box $180Suits 971 972 973 71C 72C 73C 74C

Original Part: 9513487 9513490 replaces 80850120

General

TP-541 Cab Fan $185Suits 8060 8070 8080 TR88 TR98

LACNHSP12 Sieve Adjuster – Linear Actuator $1250Suits all CR and CX models

Original Part: 84053684 84335407 Genuine

HPNH2008 Linear Actuator – Sieve Levelling $2000Suits all CR and CX models


HPIHC-0293 Gas Strut – Left Cab Door $60Suits all CR and CX models


HPIHC-3463 A/C Compressor with Clutch $770Suits CR940 CR9040 CR9060 CR9070

Original Part: 86993463 86992688 317008A2

HPIHC-0052 Glass, Door (LH) $420Suits CR940 CR960 CR970

Original Part: 87510522 87282168 84440387

HPIHC-5006 Receiver / Drier $72Suits CR940 CR960 CR970 CR9040 CR9060 CR9070


NHRC60-2 Rotor Coupling Chain Kit (one per harvester) $35Duplex ¾” - suits all TR’s up to and including TR98 19 Links and one Conn Link

NHGB50-2 Gear Box Coupler Chain Kit (two per harvester) $35Duplex 5/8” - suits all TR’s up to and including TR98 23 Links and one Conn Link

NHRC60-299 Rotor Coupling Chain (one per harvester) $40Duplex ¾” - suits TR99. 25 Links and One Conn Link

NHGB50-2 Gear Box Couple Chain Kit (two per harvester) $40Duplex 5/8” - suits TR99. 19 Links and One Conn Link

HPNH-28SC Drive Bushing Chaff Spreader $55Suits CX840 CX860 CX880 Original Part: 87380171

HPNH-1351 Cab Blower Assembly $690Suits CR920 CR940 CR960 CR970 CX840 CX860 CX880 Original Part: 84431351 NEW

Chopper BladesHPNH-7640 Stationary Chopper Knife $10

Suits CR940 CR960 CR970 CR980 CR9060 CR9070 CR9080 CX840 CX860 CX880Original Part: 84437640

HPNH-7624 Chopper Blade – Straight 18mm Hole $24Suits CR940 CR960 CR970 CR980 CR9070 CR9080 and some CX modelsOriginal Part: 84437624

HPNH-1976 Chopper Blade Winged – Left $28Suits CR940 CR960 CR970 CR980 CX840 CX860 CX880Original Part: 87031976

HPNH-1978 Chopper Blade Winged – Right $28Suits CR940 CR960 CR970 CR980 CX840 CX860 CX880Original Part: 87031978

HPNH-3455 Stationary Hardened Knife $25Suits CR9060 CR9070 CR9080 CR9090 CX8070 CX8080 CX8090Original Part: 87653455

HPNH-8524 Stationary Chopper Knife $12Suits CR9060 CR9070 CR9080 CR9090 CR7.90 CR8.90 CR9.90 CR10.90Original Part: 87318524

HPNH-8316 Chopper Blade – Straight 20mm Hole $15Suits CR9060 CR9070 CR9080 CR9090 CR7.90 CR8.90 CR9.90 CR10.90Original Part: 87318316

HPNH-4920 Chopper Blade Winged – Right $35Suits CR9060 CR9070 CR9080 CR9090 CR8090 CR7.90 CR8.90 CR9.90 CR10.90Original Part: 87384920

HPNH-4918 Chopper Blade Winged – Left $35Suits CR9060 CR9070 CR9080 CR9090 CR8090 CR7.90 CR8.90 CR9.90 CR10.90Original Part: 87384918

New Holland

Massey Ferguson/Agco/Allis


Accelerator Rolls

ARN-24 Accelerator Rollers Bolt on type $48 eaOEM Quality Rubber

Suits Agco – R40 R50 R60 R70 R42 R52 R62 R72


ARN-SS Stainless Steel Accelerator Roll – Set of 8 $1100 setAlternative to rubber Suits Agco – R60 R70 R62 R72


ARN-SS7 Stainless Steel Accelerator Roll – Set of 10 $1375 setAlternative to rubber Suits Agco – S77

Replaces Original Part: 71352611 - Rubber

ARN-SS50

Stainless Steel Accelerator Roll – Full Set $700 setAlternative to rubber Suits Agco – R40 R50 R42 R52

Replaces Original Part: 71352611 - Rubber

Engine Output Drive Parts

TPAC-1445

Water Pump $250Suits Allis – with D3500 & 670T Engines


HPAC-655 Rotor Gear Box Shaft $500Suits Allis – N5 N6 N7


Hydraulic PartsHPMF-223

Main Hydraulic Pump $1675Suits MF750 850 760 860


Walker PartsBWMF-510 Walker Blocks $46

Suits 510 550 750 850


BWMF-760 Walker Blocks $65Suits 760 860


HPMD-0532 Comer Macdon Knife Drive Box $2500 Suits Macdon 962 972 973

Case-IH 1042 1052 2052

Original Part: 100532 338670A1

HPMD-6320 Macdon Knife Drive Box – JD Type $1950Suits Macdon 960 Case-IH 1040

Original Part: 26320 NEW

Macdon Draper Platform

wArrANtyHarvestaire warrant that it will repair or replace (whichever it deems advisable) any product manufactured and sold by it which it proves to be defective in material or workmanship within a period of one year for new parts from the date of original purchase. Warranty service can be obtained by returning any defective product to Harvestaire. A purchase receipt or other proof of original purchase may be required before warranty service is rendered. If found defective under the terms of this warranty, repair or replacement will be made, without charge, together with a refund for transportation costs. If found not to be defective you will be notified and, with your consent, returned to you at your expense.

The warranty covers normal use and does not cover damage or defect which results from alteration, accident, neglect or improper installation, operation or maintenance.

Harvestaire’s obligation under this warranty is limited to the repair of replacement of the defective product (up to maximum purchase price). Harvestaire neither assumes or authorises any other person to give any other warranty or to assume any other obligation or liability on its behalf.

PArtS rEturN POLIcy1. Within 30 days of invoice date - No penalty (provided our suppliers don’t charge a penalty)

2. 30 days plus of invoice date - A restocking fee may be charged depending on circumstances.

3. After 90 days - Non-refundable.

Special Buy-in items or made to order items are non-refundable.

Parts in this catalogue are not manufactured by the Original Equipment Manufacturer. Original Equipment Manufacturers names, part numbers

and descriptions are quoted for reference purposes only.

harvestaire.com.au

For a full range of Tractor Parts see our 2017 Catalogue

TRACTOR PARTSCATAlOgue

harvestaire.com.auSince 1980

PHONE: 08 9344 7433

FAX: 08 9345 3256

EMAIL: [email protected]

2017

PHONE: 08 9344 7433 FAX: 08 9345 3256

EMAIL: [email protected]

18 Mumford Place, Balcatta, Western Australia 6021

harvestaire.com.au

header parts coguatal e - harvestaire · augers feeder house parts rotor parts engine parts ......

Documents