head stringing instructions 2012 13

17
YouTek TM Graphene TM Speed MP, REV, S Total String Length: 12 m / 39,5 ft String Pattern: 16 Main (6,5 m / 21,5 ft) 19 Cross (5,5 m / 18,0 ft) Rec. String Tension: 23-27 kg / 50-60 lbs For optimum performance use: HEAD Sonic Pro Main Strings Start at the bottom with the center holes L1 + R1. For the left and the right side of the main strings clamp 3,25m (10,75ft) each at hole L1 + R1 respectively. Tighten 2 main strings left, two main strings right and so on. Tie off at holes L6 + R6. For best results, while tensioning the outer main strings, ensure that the grommet barrels are not lifted out of position. If barrels lift, then please push these back into position before continuing. Cross Strings For the cross string measure 5,5 m (18,0 ft) string. Tie on the cross strings at hole L26/R26 and lace string through hole L25/R25. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R9/L9. Please note that grommets L7+R7, L8+R8, L24+R24, L25+R25 share both main and cross strings.

Upload: loretol

Post on 18-Jan-2016

86 views

Category:

Documents


2 download

DESCRIPTION

hEAD sTRINGIN INSTRUTIONS 2012 13

TRANSCRIPT

Page 1: HEAD Stringing Instructions 2012 13

!!

!!

!! !

YouTekTM GrapheneTM Speed MP, REV, S

!

Total String Length: 12 m / 39,5 ft String Pattern: 16 Main (6,5 m / 21,5 ft) 19 Cross (5,5 m / 18,0 ft) Rec. String Tension: 23-27 kg / 50-60 lbs For optimum performance use: HEAD Sonic Pro !

Main Strings

Start at the bottom with the center holes L1 + R1. For the left and the right side of the main strings clamp 3,25m (10,75ft) each at hole L1 + R1 respectively. Tighten 2 main strings left, two main strings right and so on. Tie off at holes L6 + R6. For best results, while tensioning the outer main strings, ensure that the grommet barrels are not lifted out of position. If barrels lift, then please push these back into position before continuing. Cross Strings For the cross string measure 5,5 m (18,0 ft) string. Tie on the cross strings at hole L26/R26 and lace string through hole L25/R25. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R9/L9. Please note that grommets L7+R7, L8+R8, L24+R24, L25+R25 share both main and cross strings. !

Page 2: HEAD Stringing Instructions 2012 13

!

!

! !

YouTekTM GrapheneTM Speed PRO

!

Total String Length: 12 m / 39,5 ft String Pattern: 18 Main (6,5 m / 21,5 ft) 20 Cross (5,5 m / 18,0 ft) Rec. String Tension: 22-26 kg / 48-57 lbs For optimum performance use: HEAD Sonic Pro !

Main Strings Start at the top with the center holes L34 + R34. For the left and the right side of the main strings clamp 3,25m (10,75ft) each at hole L34 + R34 respectively. Tighten 2 main strings left, two main strings right and so on. Tie off at holes L7 + R7. For best results, while tensioning the outer main strings, ensure that the grommet barrels are not lifted out of position. If barrels lift, then please push these back into position before continuing. Cross Strings For the cross string measure 5,5m (18,0 ft) string. Tie on the cross strings at hole L28/R28 and lace string through hole L27/R27. Tighten all 20 cross strings in direction of racquet throat. Tie off at hole L10/R10. Please note that grommets L8+R8, L9+R9, L26+R26, L27+R27 share both main and cross strings. !

Page 3: HEAD Stringing Instructions 2012 13

!

!

! !

YouTekTM GrapheneTM Speed LITE!

Total String Length: 12 m / 39,5 ft String Pattern: 16 Main (6,5 m / 21,5 ft) 19 Cross (5,5 m / 18,0 ft) Rec. String Tension: 22-26 kg / 48-57 lbs For optimum performance use: HEAD PWR Fusion !

Main Strings Start at the top with the center holes L35+R35. For the left and the right side of the main strings clamp 3,25 m (10,75 ft) each at hole L35 and R35 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L7+R7, L9+R9 as well as L27+R27, L29+R29. Tie off at holes L28+R28. Cross Strings For the cross string measure 5,5 m (18,0 ft) string. Tie on the cross strings at hole L30/R30 and lace string through hole L29/R29. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R5/L5. !

Page 4: HEAD Stringing Instructions 2012 13

!

!

!!

!! !

YouTekTM GrapheneTM Radical PRO, MP, REV, S, LITE

!

Total String Length: 12 m / 36,5 ft String Pattern: 16 Main (6,5 m / 21 ft) 19 Cross (5,5 m / 18 ft) Rec. String Tension: 22-26 kg / 48-57 lbs

For optimum performance use: HEAD Hawk !!

Main Strings

Start at the top with the center holes L35+R35. For the left and the right side of the main strings clamp 3,25 m (10,75 ft) at hole L35 and R35 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8+R8 and L28+R28. Tie off at holes L29+R29. Cross Strings For the cross string measure 5,5 m (168 ft) string. Tie on the cross strings at hole L30 and lace string through hole L28/R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R7. !

Page 5: HEAD Stringing Instructions 2012 13

!

!

! !

YouTekTM GrapheneTM Instinct MP, S, REV

!

Total String Length: 12 m / 39,5 ft String Pattern: 16 Main (6,5 m / 21,5 ft) 19 Cross (5,5 m / 18,0 ft) Rec. String Tension: 22-26 kg / 48-57 lbs (MP, REV) 23-27 kg / 50-60 lbs (S) For optimum performance use: HEAD Sonic Pro / PWR Fusion !

Main Strings

Start at the bottom with the center holes L1 + R1. For the left and the right side of the main strings clamp 3,25m (10,75ft) each at hole L1 + R1 respectively. Tighten 2 main strings left, two main strings right and so on. Tie off at holes L6 + R6. Cross Strings For the cross string measure 5,5 m (18,0 ft) string. Tie on the cross strings at hole L27/R27 and lace string through hole L25/R25. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R9/L9. Please note that grommets L7+R7, L8+R8, L24+R24, L25+R25 share both main and cross strings. !

Page 6: HEAD Stringing Instructions 2012 13

!

!

! !

YouTekTM GrapheneTM Instinct LITE!

Main Strings Start at the bottom with the center holes L1 + R1. For the left and the right side of the main strings clamp 3,25m (10,75ft) each at hole L1 + R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8 + R8 as well as L28 + R28. Tie off at holes L6 + R6. Cross Strings For the cross string measure 5,5 m (18,0 ft) string. Tie on the cross strings at hole L29/R29 and lace string through hole L28/R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L11/R11. !

Total String Length: 12 m / 39,5 ft String Pattern: 16 Main (6,5 m / 21,5 ft) 19 Cross (5,5 m / 18,0 ft) Rec. String Tension: 23-27 kg / 50-60 lbs

For optimum performance use: HEAD PWR Fusion !

Page 7: HEAD Stringing Instructions 2012 13

!

!

! !

YouTekTM GrapheneTM Speed PWR

!

Total String Length: 12 m / 39,5 ft String Pattern: 16 Main (6,5 m / 21,5 ft) 19 Cross (5,5 m / 18,0 ft) Rec. String Tension: 24-28 kg / 52-62 lbs

For optimum performance use: HEAD PWR Fusion !

Main Strings

Start at the bottom with the centre holes L1+R1. For the left and the right side of the main strings clamp 3,25 m (10,75 ft) each at hole L1+R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L7+R7, L9+R9, L10+R10 as well as L27+R27 and L29+R29. Tie off at holes L8+R8. Cross Strings For the cross string measure 5,5 m (18 ft) string. Tie on the cross strings at hole L31/R31 and lace string through hole L29/R29. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L6/R6. !

Page 8: HEAD Stringing Instructions 2012 13

!

!

!!

! !

YouTekTM GrapheneTM Prestige PWR!

Main Strings Start at the bottom with the centre holes L1+R1. For the left and the right side of the main strings clamp 3,25 m (10,75 ft) each at hole L1+R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L7+R7 and L9+R9. Tie off at holes L6+R6. Cross Strings For the cross string measure 5,5 m (18 ft) string. Tie on the cross strings at hole R28/L28 and lace string through hole L26/R26. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L4/R4. Please note that grommets L10+R10, L25+R25, L26+R26 share both main and cross strings. !

Total String Length: 12 m / 39,5 ft String Pattern: 16 Main (6,5 m / 21,5 ft) 19 Cross (5,5 m / 18,0 ft) Rec. String Tension: 24-28 kg / 52-62 lbs

For optimum performance use: HEAD PWR Fusion !

Page 9: HEAD Stringing Instructions 2012 13

!

!

!!

!! !

YouTekTM GrapheneTM Instinct PWR!

Main Strings Start at the top with the centre holes L35+R35. For the left and the right side of the main strings clamp 3,25 m (10,75 ft) each at hole L35+R35 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8+R8, L27+R27 and L29+R29. Tie off at holes L28+R28. Cross Strings For the cross string measure 5,5 m (18 ft) string. Tie on the cross strings at hole R30/L30 and lace string through hole L29/R29. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L7/R7. !

Total String Length: 12 m / 39,5 ft String Pattern: 16 Main (6,5 m / 21,5 ft) 19 Cross (5,5 m / 18,0 ft) Rec. String Tension: 24-28 kg / 52-62 lbs

For optimum performance use: HEAD PWR Fusion !

Page 10: HEAD Stringing Instructions 2012 13

!

!

!!

!! !

YouTekTM IG Prestige PRO

!

Total String Length: 11 m / 36,5 ft String Pattern: 16 Main (6 m / 20 ft) 19 Cross (5 m / 16,5 ft) Rec. String Tension: 26 +/- 2kp / 57 +/- 5lbs

For optimum performance use: HEAD Sonic Pro

Main Strings

Start at the top with the center holes L35 and R35. For the left side of the main strings clamp 3 m (10 ft) at hole L35 and R35. Tighten 2 main strings right, two main strings left and so on, skipping holes L8 + R8 and L28 + R28. Tie off at holes L29+R29. Cross Strings Tie on the cross strings at hole L30 and lace string through hole L28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R7. !

Page 11: HEAD Stringing Instructions 2012 13

!

!

!!

!!

!!!

!!!

!!!

!! !

YouTekTM IG Prestige MID!

Main Strings Start at the top with the center holes L38 and R38. For the left side of the main strings clamp 3m (10ft) at hole R38. Tighten 2 main strings right, two main strings left and so on, skipping holes L+R31, L+R29 as well as L+R8 and L+R10. Tie off at holes L+R7. Cross Strings Tie on the cross strings at hole R 33 and lace string through hole R31. Tighten all 20 cross strings in direction of racquet throat. Tie off at hole R7. !

Total String Length: 11 m / 36,5 ft String Pattern: 18 Main (6 m / 20 ft) 20 Cross (5 m / 16,5 ft) Rec. String Tension: 26 +/- 2kp / 57 +/- 5lbs

For optimum performance use: HEAD Sonic Pro !

Page 12: HEAD Stringing Instructions 2012 13

!

!

!!

!! !

YouTekTM IG Prestige MP

!

Total String Length: 11 m / 36,5 ft String Pattern: 18 Main (6 m / 20 ft) 20 Cross (5 m / 16,5 ft) Rec. String Tension: 26 +/- 2kp / 57 +/- 5lbs

For optimum performance use: HEAD Sonic Pro !!

Main Strings

Start at the top with the center holes L38 and R38. For the left side of the main strings clamp 3m (10ft) at hole L38 and R38. Tighten 2 main strings right, two main strings left and so on, skipping holes L+R31, L+R29 as well as L+R9. Tie off at holes L+R7. Cross Strings Tie on the cross strings at hole R 33 and lace string through hole R31. Tighten all 20 cross strings in direction of racquet throat. Tie off at hole R12. !

Page 13: HEAD Stringing Instructions 2012 13

!

!

!!

! !

YouTekTM IG Prestige S

!

Total String Length: 11 m / 36,5 ft String Pattern: 16 Main (6 m / 20 ft) 19 Cross (5 m / 16,5 ft) Rec. String Tension: 26 +/- 2kp / 57 +/- 5lbs

For optimum performance use: HEAD PWR Fusion/FXP Tour String !!

Main Strings

Start at the bottom with the center holes L1 and R1. For the left side of the main strings clamp 3 m (10 ft) at hole L1 and R1. Tighten 2 main strings right, two main strings left and so on. Tie off at holes L6+R6. Cross Strings Tie on the cross strings at hole L27/R27 and lace string through hole L25/R25. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole R4. !

Page 14: HEAD Stringing Instructions 2012 13

!

!

!! !

YouTekTM IG Extreme PRO

!

Total String Length: 11 m / 36,5 ft String Pattern: 16 Main (6 m / 20 ft) 19 Cross (5 m / 16,5 ft) Rec. String Tension: 26 +/- 2kp / 57 +/- 5lbs

For optimum performance use: HEAD Sonic Pro !!

Main Strings Start at the bottom with the centre holes L1+R1. For the left and the right side of the main strings clamp 3 m (10 ft) each at hole L1+R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L7+R7, L9+R9 as well as!L26+R26 and L28+R28. Tie off at holes L8+R8. Cross Strings For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole R27/L27 and lace string through hole L28/R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L5/R5. !

Page 15: HEAD Stringing Instructions 2012 13

!

!

!! !

YouTekTM IG Extreme MP

!

Total String Length: 11 m / 36,5 ft String Pattern: 16 Main (6 m / 20 ft) 19 Cross (5 m / 16,5 ft) Rec. String Tension: 26 +/- 2kp / 57 +/- 5lbs

For optimum performance use: HEAD Sonic Pro !!

Main Strings Start at the bottom with the centre holes L1+R1. For the left and the right side of the main strings clamp 3 m (10 ft) each at hole L1+R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8+R8 as well as L28+R28. Tie off at holes L6+R6. Cross Strings For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole R29/L29 and lace string through hole L28/R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L11/R11. !

Page 16: HEAD Stringing Instructions 2012 13

!

!

!!

!! !

YouTekTM IG Extreme ELITE

!

Total String Length: 11 m / 36,5 ft String Pattern: 16 Main (6 m / 20 ft) 19 Cross (5 m / 16,5 ft) Rec. String Tension: 26 +/- 2kp / 57 +/- 5lbs

For optimum performance use: HEAD FXP !!

Main Strings Start at the bottom with the centre holes L1+R1. For the left and the right side of the main strings clamp 3 m (10 ft) each at hole L1+R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L6+R6, L8+R8 as well as L26+R26 and L28+R28. Tie off at holes L8+R8. Cross Strings For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole R30/L30 and lace string through hole L28/R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L5/R5. !

Page 17: HEAD Stringing Instructions 2012 13

!

!

!!

YouTekTM IG Extreme OS

!

Total String Length: 11 m / 36,5 ft String Pattern: 16 Main (6 m / 20 ft) 19 Cross (5 m / 16,5 ft) Rec. String Tension: 26 +/- 2kp / 57 +/- 5lbs

For optimum performance use: HEAD FXP!!

Main Strings Start at the bottom with the centre holes L1+R1. For the left and the right side of the main strings clamp 3 m (10 ft) each at hole L1+R1 respectively. Tighten 2 main strings left, two main strings right and so on, skipping holes L8+R8 as well as L28+R28. Tie off at holes L6+R6. Cross Strings For the cross string measure 5 m (16,5 ft) string. Tie on the cross strings at hole R29/L29 and lace string through hole L28/R28. Tighten all 19 cross strings in direction of racquet throat. Tie off at hole L11/R11. !