he new conveyor collection - lvp conveyor systems
TRANSCRIPT
e x c e l l e n c e b u i l t i n
LVP Conveyor Ltd G arston Road, Corby,
Northamptonshire, NN18 8NH
Tel: +44 (0) 1536 747740Fax: +44 (0) 1536 745451
Email: [email protected]: www.lvpconveyors.co.uk
he new conveyor collection
indexgallery
Powered Rol l er Conveyorpage 5 & 6
Bel t Conveyorspage 7 & 8
Gravi ty Rol l er Conveyorspage 9
Motori sed Rol l er Conveyorpage 10
Designed to provide a smooth and continuous flow ofproduct under positive control. Used for the change inelevation, either decline or incline.
Lineshaft driven roller conveyor, offering accumulation,efficienc , economy, a wide range of modules and theability to be formed into tailor made layouts.
The economical and simplest form of transporting loadsfrom one point to another. Minimal effort required in themovement of goods whether it is manual assistance orgravitational force.
The progressive assembly conveyor system offers a pro-duction aid with cleanliness, safety and quiet operation.
Designed to overcome the age old problem wherebyheavy loads cannot be accumulated with minimum orzero end pressure.
page 13
Whether it is a small package weighing grams or a one tonne pallet, there is a conveyor in theUni-Xu® Series to handle it.
From assembly to despatch, the Uni-Xu® Series will make production more efficient, rapid and safer.
All equipment in the range is modular in design which together with the extensive choice of ancillaryequipment, enables the user to make a tailor made system to suit their own specif c requirements.
With a track record of over 40 years constant improvement and innovation, the Uni-Xu® Series is in use throughout Europe in a Wide spectrum of industries.
Pal l et Handl i ng Conveyorpage 11 & 12
Key to Products
Conveyor system in operation
Straight section
Straight section showing accumulation
Turntable
chai n dri ven pallet conveyor
uni-xu® palletturntable
uni-xu® gravityconveyor
uni-xu® seriespusher
uni-xu® seriestransfer
uni-xu® seriesbend
uni-xu® pallet conveyorsstraight
uni-xu® palletchain transfer
uni-xu® series conveyors
i l l ustrated systemBelow are examples of units of conveyorsshown forming an integrated system.
page 3 page 12
uni-xu® series switch
uni-xu® series motorised conveyors uni-xu® series
lift up gate
ball transfer table
uni-xu® seriesmerge
skatewheelbend
uni-xu® seriescorner turn
uni-xu® seriesblade stop
uni-xu® serieszero end pressureuni-xu® belt
conveyors
page 4
uni -xu 2000 pal l et conveyor®
The uni-xu® 2000 range of pallet conveyor is a rugged,easy to install, simple and safe to operate conveyor systemdesigned for moving larger loads. 1000mm x 1200mmpallet loads can be safely accumulated.
A range of ancillary equipment is available, includingTransfer Units and Turntables which can transform themodules into a completely integrated system.
FeaturesMaximum load capacity 1500Kg including pallet
Linespeed 10m per minute standard
Operational Safety
Noise reduction when compared with other types of pallet conveyor
Clean line appearance
Supplied in fully assembled modules
page 11
uni -xu powered rol l er conveyor series
The Modular design of Uni-Xu®’s Lineshaft Driven RollerConveyor range enables purpose designed layouts and systemsto be arranged with standard modules. The wide range of units available allows the most complex systems to be easilyassembled.
Features:
ACCUMULATION
Products can queue without heavy build up of pressure, ie. atwork stations or where traffic control is required.
A patented zero line pressure system is also available.
EFFICIENCY
Individually powered rollers are driven by the lineshaft via elastomeric belts, allowing a single motor to power large sections of an overall system
ECONOMY
As fewer drive motors are required, installation, maintenanceand power consumption is reduced
NOISE LEVELS
The conveyor is designed to operate within acceptable noiselevels for most working environments
HEALTH AND SAFETY
All features of the conveyor comply with current Health andSafety regulations
TYPES AND CAPACITIES
XU30 and XU30S. 35mm diameter rollers, 37.5mm pitch 4kg drive per roller. Designed to carry small products
XU60 50mm diameter rollers, 75, 100 and 150mm pitch 8 kg.drive per roller. Designed to suit the majority of applications
XU90 as the XU60 but with a drive per roller of 12 kg.Designed to give extra capacity for heavier applications
All conveyors are available in a variety of insideframe widths from 412mm up to 912mm
uni -xu motorised
Key to Products
Bend
Straight track
Individually powered driven motorisedrollers in a maximum zone length of900mm, with slave driven rollers at75mm pitch, form the basis of this quietand cost saving system
The system can be supplied completewith a proven intelligent electronic control package that gives a cascadingsupply of product along the conveyor track, plus zero end pressure capabilities
FEATURES:
Available in various track widths
Simple ‘snap’ together wiringconnections
90°, 60°, 45° and 30° bends
Speed range of 10 to 50 metres perminute
Powered by 24 volt DC brushlessmotor
page 10page 5
® ®
uni -xu gravi ty conveyors
These gravity, roller and skatewheel conveyor units provide clean, unbroken lines in any system where sections of unmotorised travel is required.
Features:Unique Skatewheel and ball unit fixin
Revolutionary stub axle roller fixing oncertain models
Quality ball bearing for smoothand quick operation
TYPES AND CAPACITIES
Available with steel or plastic rollers
Steel: 35mm, 50mm and 60mm diameters
Plastic: 40mm and 50mm diameters
Various widths from 312mm to 1012mm depending on roller specificatio
Various pitches depending on roller diameter
Key to Products
Lift up gate
Skatewheel bend
Ball transfer table
Bend
Skatewheel bend, connected to roller conveyor,mounted on support stands
Available in stainless steel.
page 6page 9
Key to Products
Merge Section
Corner Turn
Pusher Unit Mid Position in Straight Section
90 Degree Bend
Drive Unit
Switch Section
Multi Grooved Rollers at the start of an inclined section
Pusher Unit positioned at the end of a straight section
Pack Turn Unit
Switch Sorter
Chain Transfer
Pack Positioning Unit
Lift up Gate Section
®
uni -xu bel t conveyors
Designed to match the Uni-Xu® range, aesthetically pleasingclean line side frames and modular construction offers an outstanding combination of economy, modern design, qualityand performance.
Two types of frame are available: Uni-Xu® type and the light dutyat 75mm deep.
FEATURES:Skid or roller deck
Standard speeds 5 to 30 metres perminute
Outstanding combination of economy,modern design, quality and performance
Smooth clean line side frame section,matching the Uni-Xu® series of poweredroller conveyors, or available with slimlineside frame section
Easily maintained:
Lift out the detachable skid plate withquick release end terminals and tensionrollers
All conveyors are supplied with underguarding fitted as standard, guide rail is anoptional extra
A full range of conveyor belts are availableto suit most applications
Standard Products available:Incline/Decline Conveyor
Horizontal Conveyors
Mobile Conveyors
Comprehensive Range of Belt Types
Pop-out Safety Roller
Motorised Drum
End Drive
End Tension
Terminal End
Intermediate Drive
Intermediate Section
Nose Over
Change Direction
Also available in stainless steel
page 8page 7
®