hdpe_fittingsfeb2013
TRANSCRIPT
Industrial Plastics Division
FUSION EQUIPMENT • SALES • RENTALS • TRAININGHDPE PIPE • FITTINGS • FABRICATION
Centerville, UT • 1055 West 650 North // C enterville, UT 84014 // (801) 295-4373 (HDPE) // Fax (801) 294-7020
Lakeland, FL • 1995 Lasso Lane // Lakeland, FL 33801 // (863) 667-1686 // Fax (863) 666-5310 // Toll Free (866) 470-4373 (HDPE)
Houston, TX • 5855 Kelley Street // Houston, TX 77026-1901 // (713) 491-5000 // Fax (713) 633-1097 // Toll Free (855) 233-4373 (HDPE)
Tucson, AZ • 5455 South Nogales Hwy // Tucson, AZ 85706 // (520) 792-2022 // Fax (520) 807-9718 // Toll Free (866) 930-4373 (HDPE)
Washougal, WA • 740 South 28th Street // Washougal, WA 98671-2597 // (360) 835-2129 // Fax (360) 835-3521 // Toll Free (800) 634-5082
Indianapolis, IN • 2702 North Tibbs Avenue // Indianapolis, IN 46222 // (317) 925-0389 // Fax (317) 925-0755 // Toll Free (866) 620-4373 (HDPE)
Horseheads, NY • 18 Ithaca Street // Horseheads, NY 14845 // (607) 739-3013 // Fax (607) 739-2906 // Toll Free (855) 897-4373 (HDPE)
Trust earned through performance.1
02/13
TABLE OF CONTENTS INFO SHEETS……………………………………………….P 3-11
PIPE CHARTS…………………………………………….…P 12-17
FLANGE ADAPTERS……………………………………..P 18-22
STUB ENDS…………………………………………………..P 23-25
FLANGES (HDPE BLINDS & CONVOLUTED)…P 26-29
MJ ADAPTERS IPS/DIPS……………………………… P 30-32
WALL ANCHOR / WATER STOP…………………….P 33-34
IPS/DIPS TRANSITION……………………………….…P 35
CAPS……………………………………………………………..P 36-37
REDUCERS…………………………………………………...P 38-42
ELBOWS………………………………………………………..P 43-65
TEES……………………………………………………………..P 66-75
CROSSES……………………………………………………….P 76-78
LATERALS…………………………………………………….P 79-82
ELECTROFUSION COUPLINGS (EF)……………..P 83-91
FM INFO……………………………………………………….P 92-94
FM PRICE SHEETS………………………………………. P 95-115
INDUSTRIAL PLASTICS ISO CERTIFICATE…..P 116-117
2
02/13
FITTING INFORMATION
Machined Fittings:
Machined fittings (i.e.: flange adapters, stub ends, MJ adapters, slip joint anchors,
branch saddles) are normally fully pressure rated to SDR ordered unless otherwise specified.
Machined fittings are normally stocked in most SDR's listed and can be re-machined to a lesser wall thickness if needed.
Some fittings may require additional machining charges, please inquire for pricing infor-mation if re-machining is necessary.
Fabricated Fittings:
Fabricated mitered fittings (ie: elbows, line tees, and line crosses with the exception of Wyes which are @63%) are generally rated at 80% of the pressure rating of the SDR of material that is used for the fitting (ie: a mitered fitting produced using SDR-11 160 psi material would be pressure rated for a working pressure of 128 psi).
Fully pressure rated mitered fabricated fittings will be constructed using the next size heavier SDR material available (ie: fittings rated for a SDR-11 160 psi working pressure rating would be manufactured using SDR-9 material).
Other fabricated fittings such as branch saddle tees, branch saddle wyes, and waterstops are normally pressure rated to the SDR ordered.
Molded Fittings:
Molded fittings are stocked in most SDR's listed and are normally fully pressure rated.
3
02/13
HDPE FITTING SUBMITTAL DATA
Customer: Project Name: Service: (Size, service, working pressure, etc)
Industrial Plastics fittings are manufactured from pressure rated high density polyethylene pipe grade feedstock resin made to ASTM F714.
The resin properties are determined by the resin and pipe manufacturers, and can be any one of the
following resins as specified by the customer. Items marked “X” are the subject of this submittal.
ASTM D3350- Standard Specification for Polyethylene Plastic Pipe & Fittings Material
Cell Classification 234373E (Yellow, Medium Density PE 2406/2407) Bi-modal
Cell Classification 234373E (Yellow, Medium Density PE 2406/2407) Uni-modal
Cell Classification 345464C (Black, High Density PE 3408/3608)
Cell Classification 445576C (Black PE 4710 Bi-modal)
Cell Classification 445574C (Black PE 4710 Uni-modal)
The dimensional characteristics and pressure capabilities of Industrial Plastics molded and fabricated fittings are established in accordance with the following standards, and as specified by the customer. Additional dimensional data may accompany this submittal. Items marked “X” are the subject of this submittal.
ASTM D2513-09 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing And Fittings
ASTM F2206-02 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock.
ASTM D3261-03 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D2683-04 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter- Controlled Polyethylene Pipe and Tubing
AWWA C906-07 DIPS Polyethylene (PE) Pressure Pipe and Fittings, 2in through 63in For Water Distribution – Fittings specified to be AWWA approved meet this specification. Customer waives AWWA hydro-testing requirement over 24” unless specifically noted on purchase order.
AWWA C906-07 IPS Polyethylene (PE) Pressure Pipe and Fittings, 2in through 63in For Water Distribution – Fittings specified to be AWWA approved meet this specification. Customer waives AWWA hydro-testing requirement over 24” unless specifically noted on purchase order.
NSF-61 Drinking Water System Components – Health Effects
Factory Mutual Class 200 Factory Mutual, Class number 1613, Polyethylene (PE) Pipe and Fittings for Underground Fire Protection
Factory Mutual Class 150 Factory Mutual, Class number 1613, Polyethylene (PE) Pipe and Fittings for Underground Fire Protection
Other All fabrication procedures will be carried out according to the IP QA/QC manual including routine in-plant inspections, quality control, sampling, and long term testing which meets or exceeds the customer specifications or standards listed above. The IP QA/QC manual is available for customer inspection upon request. Visit our website: www.HDPE.com
4
02/13
Order and Price Information
Pricing:
All pricing will be issued FOB. Industrial Plastics Division Location unless noted otherwise,. Freight pricing estimates can be provided upon request.
All prices are based on normal manufacturing lead times at normal costs. Rush manufacturing and rush shipments may be subject to a service or expediting charge.
All pricing and designs are subject to change without notice.
All orders are subject to Industrial Plastics Division, acceptance and our current conditions of sale..
Ordering:
Freight Charges: Freight will be prepaid and added to the invoice unless otherwise specified.
Order Placement: Orders are taken by our Customer Service Department via phone, facsimile and/or
e-mail and will require a purchase order number.
Availability of Product:
Industrial Plastics Division, has a large inventory of HDPE pipe, fittings and accessories.,
Availability of the products listed in this catalog will always be subject to the availability of raw material. Large quantities of raw material are kept on hand to provide timely deliveries.
5
02/13
RETURN POLICY
All returns must be approved by Industrial Plastics Division, prior to return.
1. Standard Stock Items: A. 15% restocking fee will be charged on the return of “standard stock” items. B. Material must be in resalable condition C. Customer is responsible for freight charges incurred on returned materials.
2. Non-stock or Custom Ordered Material. A. Most non-stock and custom ordered items are noncancelable/non returnable once material is ordered and or
production has begun.
6
02/13
CORPORATE BUSINESS MANAGER:Joe Morgan ~ 757-876-0969 cell
GENERAL MANAGER:Ron Hartman ~ 863-559-6113 cell
NATIONAL SALES MANAGER:Dave Schlegel ~ 360-518-8480 cell
REGIONAL SALEMEN:
REGION NAME REGIONAL SALESMEN
CELL PHONE
NORTHWEST Gary Burback 206-786-0707
SOCAL Mike Nichols 805-450-3399
MOUNTAIN Jack Cole 801-682-6123
MIDWEST Joe Paul 937-509-0241
NORTHEAST Lawrence Norris 978-434-1287
SOUTHEAST Clayton Yawn 912-659-1324
SOUTH CENTRAL Chris Lofton 281-917-9935
FLORIDA Keith Fuqua 863-559-9264SOUTHWEST Mark Kastl 602-396-8410 Arizona and New Mexico
ND, SD, NE, CO,Eastern MT, WY, NV, UT,
MN, IA, MO WI, IL, MI, IN, KY, OH, WV, Nashville and NW Tn
ME, VT, NH, CT, MA, RI, NY, NJ, PA, DE, MD, Northern AND
Western VA.
Industrial Plastics Division Contact Information
Southeastern VA, NC, Eastern and Southern TN, MS, AL, GA, SC,
PR
FLORIDA
TX, KS, OK, AR, LA
STATES COVERED IN REGION
AK, ID, WA, OR, Western MT
CA, HI,
7
02/13
Name Position Direct Line Cell Phone Fax
Bancke, ChadINSIDE SALES/ Washougal,Wa (360)-835-4013 N/A (360)-835-3521
Lien, William(Denny)
INSIDE SALES/ Washougal,Wa (360)-835-4009 N/A (360)-835-3521
Schreiner, Tyson
SALES MANAGER/ Washougal,Wa (360)-835-4011 (360) 518-1240 (360)-835-3521
Taylor, MikeINSIDE SALES/ Washougal,Wa (360)-835-4008 N/A (360)-835-3521
Donnelly, JoeRental
Equip\Washougal, Wa (360)-835-4050 (360) 518-1890 (360)-835-5937
Name Position Phone Cell Phone Fax
Ward, RichardINSIDE
SALES/Lakeland Fl (863) 614-9328 (863) 860-2172 (863) 666-5310
Mason, JeffINSIDE
SALES/Lakeland Fl (863)-614-9324 n/a (863) 666-5310
Issler, TimINSIDE
SALES/Lakeland Fl (863)-614-9331 n/a (863) 666-5310
Culverhouse, Michael
FUSION MANAGER Rental Equipment
Lakeland Fl (863) 614-9325 (863) 581-6611 (863) 666-5310
Name Position Phone Cell Phone Fax
Cole, Justin
INSIDE SALES/Centerville,
UT 801-295-4373 N/A (801) 294-7020
MANAGER ~ Shawn Rupe ~ 801-430-6906 cell CENTERVILLE, UT FACILITY ~ 801-295-HDPE (4373)
MANAGER ~ Joshua Stripling ~ 863-272-5903 cell
WASHOUGAL, WA FACILITY ~ 800-634-5082MANAGER ~ Jim Schlegel ~ 360-798-0219 cell
LAKELAND, FL FACILITY ~ 866-470-HDPE (4373)
8
02/13
Name Position Phone Cell Phone Fax
Bankemper, ChrisINSIDE SALES/TUSCON 866-930-4370 520-954-2908 (520) 807-9718
Trevino, Yvonne Rental Contact 866-930-4370 N/A (520) 807-9718
Name Position Phone Cell Phone FaxKenworthy, Jeff Inside Sales 866-620-4373 N/A 317-925-0755Kloibhofer, Jason Inside Sales 866-620-4373 N/A 317-925-0755
Name Position Phone Cell Phone FaxBragantini, Rafael Inside Sales 855-233-4373 N/A (713)-633-1097Cromartie, Philip Inside Sales 855-233-4373 N/A (713)-633-1097
Name Position Phone Cell Phone FaxMolly Horton Inside Sales 607-739-3013 N/A (607)-739-2906Dan Kent Inside Sales 607-739-3013 N/A (607)-739-2906
Name Position Phone Cell Phone FaxPiotrowski, Christine Inside Sales 866-549-6115 N/A (262)-628-1907
Manager ~ Tim Brizzolara ~ 317-448-8910 Cell
INDIANAPOLIS, IN FACILITY ~ 866-620-HDPE (4373)MANAGER ~ Allen Stratton ~ 317-654-4452 cell
HOUSTON, TX FACILITY ~ 855-233-HDPE (4373)MANAGER ~ Don Branch ~ 832-262-2779 cell
TUCSON, AZ FACILITY ~ 866-930-HDPE (4373)MANAGER ~ Sand Zaspel ~ 520-954-5848 cell A1
LANDFILL
HORSEHEADS, NY FACILITY ~ 855-897-HDPE (4373)MANAGER ~ Joe McInnis ~ 607 738 6046 cell
9
02/13
HD
PE R
EGIO
NA
L M
AP
KYM
O
Cent
ervi
lle
Tucs
on
Hou
ston
Indi
anap
olis
WV
Lake
land
FL
GA
SC
VA NCPA
NY
VTN
H
ME
Bran
ch L
ocat
ions
Chris
Lof
ton
Clay
ton
Yaw
nKe
ith F
uqua
Law
renc
e N
orris
Jack
Col
eM
ike
Nic
hols
Gar
y Bu
rbac
kJo
e Pa
ul
AK
Was
houg
al
WA
OR
ID
MT
SDND
MN
WS
MI
INO
HIL
IAN
E
WY
UT
NV
CA
AZ
NM
OK
KS
CO
HI
TXLA
MS
AK
AL
TN
Mar
k Ka
stl
Hor
sehe
ads
10
02/13
Rev:3/30/2007 5:40 PM D:\Price Book\price book from desk top\Price Sheet dated 01 08 2013\3F Industrial Plastics Division Warranty v03.doc
LIMITED WARRANTY
1. WARRANTY: Subject to the limitations expressed herein, Seller warrants that products manufactured by Seller shall be free from defects in design, material and workmanship for a period of one (1) year from installation but in no case shall the warranty period extend longer than eighteen (18) months from the date of sale ("Warranty Period"). This warranty is void for any damage caused by (a) improper storage or installation (b) accident, damage, abuse or misuse, (c) abnormal or unusual operating conditions or applications (d) operating conditions or applications not made known to Seller prior to the date of the sale of the products (e) operating conditions or applications above the rated capacity of the product (f) a purpose or application in any way different from that for which the product was designed or (g) failure to comply with the terms of this warranty agreement.
2. REMEDIES. Seller shall repair or replace, at its option and at no additional charge, any non-conforming or otherwise defective product, upon receipt of notice from Buyer during the Warranty Period of the alleged material defect. Seller makes NO ADDITIONAL ALLOWANCE FOR THE LABOR OR EXPENSE OF REPAIRING OR REPLACING DEFECTIVE PRODUCTS OR WORKMANSHIP OR DAMAGE RESULTING FROM SAME. SELLER HEREBY DISCLAIMS ALL OTHER EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OR FITNESS FOR A PARTICULAR PURPOSE.
3. BUYER RESPONSIBILITIES. Every claim under this warranty shall be deemed waived unless Buyer submits to Seller a detailed description of the alleged defect and the manner in which Seller's workmanship is believed to be materially defective. Such description must be submitted in writing within sixty (60) days of the date Buyer knew or reasonably should have known of the alleged material defect and within the Warranty Period.
4. LIMITATION OF LIABILITY. The warranty provided above is strictly limited to its terms and is in lieu of all other warranties expressed, implied and statutory. Buyer specifically understands and agrees that Seller shall not be liable in tort to Buyer, whether based on negligence, strict liability, or any other theory of tort liability for any action or failure to act in respect to the manufacture, preparation for sale, sale, delivery or use of Seller's products. Buyer expressly agrees that his sole and exclusive remedy for breach of the warranty set forth above shall be the remedies set forth above. BUYER FURTHER SPECIFICALLY UNDERSTANDS AND AGREES THAT, EXCEPT AS PROVIDED NO REMEDY SHALL BE AVAILABLE TO BUYER, INCLUDING, BUT NOT LIMITED TO, CLAIMS FOR INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. UNDER NO CIRCUMSTANCES WILL SELLER BE LIABILE FOR LOSS OF ANTICIPATED PROFITS OR ANY OTHER LOSS CAUSED BY REASON OF NONOPERATION OR INCREASED EXPENSE OF OPERATION CAUSED BY SELLER'S PRODUCTS. BUYER HEREBY ACKNOWLEDGES AND AGREES THAT UNDER NO CIRCUMSTANCES, AND IN NO EVENT, SHALL SELLER'S LIABILITY, IF ANY, EXCEED THE NET SALES PRICE OF THE DEFECTIVE PRODUCT(S) PURCHASED DURING THE PREVIOUS CONTRACT YEAR.
5. RECOMMENDATIONS BY SELLER. Seller may assist Buyer in selection decisions by providing information regarding products that it manufacturers and those manufactured by others. However, Buyer acknowledges that Buyer ultimately chooses the product's suitability for its particular use, as normally signified by the signature of Buyer's technical representative. Any recommendation made by Seller concerning the use, design, application or operation of the products shall not be construed as representations or warranties, expressed or implied. Failure by Seller to make recommendations or give advice to Buyer shall not impose any liability upon Seller.
6. EXCUSED PERFORMANCE. Seller will make a good faith effort to complete delivery of the products as indicated by Seller in writing, but Seller assumes no responsibility or liability and will accept no backcharge or loss or damage due to delay or inability to deliver, caused by acts of God, war, labor difficulties, accidents, inability to obtain materials, delays of carriers, contractors or suppliers or any other causes of any kind whatever beyond the control of Seller. Under no circumstances shall Seller be liable for any special, consequential, incidental, or direct damages, losses, or expenses (whether or not based on negligence) arising directly or indirectly from delays or failure to give notice of delay.
7. CONTROLLING PROVISIONS. All terms and conditions contained in any prior oral or written communication, including, without limitation, Buyer's purchase order, which are different from or in addition to the terms and conditions herein are hereby rejected and shall not be binding on Seller, whether or not they would materially alter this document, and Seller herby objects thereto. Buyer agrees that all sales are subject to Seller's Terms and Conditions (Terms) which are available upon request or can be viewed on the web at www.ferguson.com/sales-terms.html. Buyer will be deemed to have assented to Terms if any part of the goods and/or services are delivered.
11
02/13
IPS Size and Dimension Data PE4710 (PE3408)
Pressure Ratings are calculated using 0.63 design factor for HDS at 73°F as listed in PPI TR-4 for PE 4710 materials.Temperature, Chemical, and Environmental use considerations may require use of additional design factors.
IPS Pipe Size
Nominal OD (in)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
IPS Pipe Size
1 1/4" 1.660 0.227 1.179 0.45 0.184 1.270 0.37 0.151 1.340 0.31 0.123 1.399 0.26 1 1/4"1 1/2" 1.900 0.260 1.349 0.59 0.211 1.453 0.49 0.173 1.533 0.41 0.141 1.601 0.34 1 1/2"
2" 2.375 0.325 1.686 0.91 0.264 1.815 0.77 0.216 1.917 0.64 0.176 2.002 0.53 2"3" 3.500 0.479 2.485 1.99 0.389 2.675 1.66 0.318 2.826 1.39 0.259 2.951 1.16 3"4" 4.500 0.616 3.194 3.28 0.500 3.440 2.75 0.409 3.633 2.31 0.333 3.794 1.91 4"6" 6.625 0.908 4.700 7.13 0.736 5.065 5.96 0.602 5.349 5.00 0.491 5.584 4.15 6"8" 8.625 1.182 6.119 12.08 0.958 6.594 10.10 0.784 6.963 8.47 0.639 7.270 7.04 8"10" 10.750 1.473 7.627 18.76 1.194 8.219 15.69 0.977 8.679 13.15 0.796 9.062 10.93 10"12" 12.750 1.747 9.046 26.39 1.417 9.746 22.09 1.159 10.293 18.51 0.944 10.749 15.37 12"14" 14.000 1.918 9.934 31.81 1.556 10.701 26.63 1.273 11.301 22.32 1.037 11.802 18.54 14"16" 16.000 2.192 11.353 41.55 1.778 12.231 34.78 1.455 12.915 29.15 1.185 13.488 24.21 16"18" 18.000 2.466 12.772 52.58 2.000 13.760 44.02 1.636 14.532 36.88 1.333 15.174 30.64 18"20" 20.000 2.740 14.191 64.92 2.222 15.289 54.34 1.818 16.146 45.54 1.481 16.860 37.83 20"22" 22.000 3.014 15.610 78.55 2.444 16.819 65.74 2.000 17.760 55.10 1.630 18.544 45.80 22"24" 24.000 3.288 17.029 93.48 2.667 18.346 78.26 2.182 19.374 65.58 1.778 20.231 54.50 24"26" 26.000 2.889 19.875 91.84 2.364 20.988 76.97 1.926 21.917 63.95 26"28" 28.000 3.111 21.405 106.51 2.545 22.605 89.25 2.074 23.603 74.16 28"30" 30.000 3.333 22.934 122.26 2.727 24.219 102.46 2.222 25.289 85.13 30"32" 32.000 2.909 25.833 116.58 2.370 26.976 96.86 32"34" 34.000 3.091 27.447 131.62 2.519 28.660 109.38 34"36" 36.000 3.273 29.061 147.56 2.667 30.346 122.62 36"42" 42.000 3.111 35.405 166.87 42"48" 48.000 48"54" 54.000 54"
200 psi 160 psiRating DR 7.3 DR 9.0 DR 11.0
255 psi
Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter is calculated using nomnal OD and Minimum wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing components to fit the pipe ID, refer to pipe dimension and tolerances in the applicable pipe manufacturing specification.
DR 13.5Pressure 320 psi
12
02/13
IPS Size and Dimension Data PE4710 (PE3408)
Pressure Ratings are calculated using 0.63 design factor for HDS at 73°F as listed in PPI TR-4 for PE 4710 materials.Temperature, Chemical, and Environmental use considerations may require use of additional design factors.
IPS Pipe Size
Nominal OD (in)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
IPS Pipe Size
1 1/4" 1.660 1 1/4"1 1/2" 1.900 1 1/2"
2" 2.375 0.140 2.078 0.43 2"3" 3.500 0.206 3.063 0.94 3"4" 4.500 0.265 3.938 1.55 0.214 4.046 1.27 4"6" 6.625 0.390 5.798 3.36 0.315 5.957 2.75 0.255 6.084 2.25 0.204 6.193 1.81 6"8" 8.625 0.507 7.550 5.68 0.411 7.754 4.66 0.332 7.921 3.81 0.265 8.063 3.06 8"10" 10.750 0.632 9.410 8.83 0.512 9.665 7.24 0.413 9.874 5.90 0.331 10.048 4.77 10"12" 12.750 0.750 11.160 12.43 0.607 11.463 10.18 0.490 11.711 8.31 0.392 11.919 6.70 12"14" 14.000 0.824 12.253 14.99 0.667 12.586 12.29 0.538 12.859 10.01 0.431 13.086 8.09 14"16" 16.000 0.941 14.005 19.57 0.762 14.385 16.04 0.615 14.696 13.08 0.492 14.957 10.55 16"18" 18.000 1.059 15.755 24.77 0.857 16.183 20.30 0.692 16.533 16.56 0.554 16.826 13.37 18"20" 20.000 1.176 17.507 30.57 0.952 17.982 25.06 0.769 18.370 20.45 0.615 18.696 16.49 20"22" 22.000 1.294 19.257 36.99 1.048 19.778 30.34 0.846 20.206 24.74 0.677 20.565 19.97 22"24" 24.000 1.412 21.007 44.04 1.143 21.577 36.10 0.923 22.043 29.45 0.738 22.435 23.75 24"26" 26.000 1.529 22.759 51.66 1.238 23.375 42.36 1.000 23.880 34.57 0.800 24.304 27.89 26"28" 28.000 1.647 24.508 59.93 1.333 25.174 49.12 1.077 25.717 40.09 0.862 26.173 32.36 28"30" 30.000 1.765 26.258 68.81 1.429 26.971 56.41 1.154 27.554 46.02 0.923 28.043 37.12 30"32" 32.000 1.882 28.010 78.26 1.524 28.769 64.18 1.231 29.390 52.37 0.985 29.912 42.26 32"34" 34.000 2.000 29.760 88.37 1.619 30.568 72.44 1.308 31.227 59.12 1.046 31.782 47.68 34"36" 36.000 2.118 31.510 99.08 1.714 32.366 81.20 1.385 33.064 66.28 1.108 33.651 53.48 36"42" 42.000 2.471 36.761 134.86 2.000 37.760 110.54 1.615 38.576 90.18 1.292 39.261 72.75 42"48" 48.000 2.824 42.013 176.15 2.286 43.154 144.40 1.846 44.086 117.80 1.477 44.869 95.05 48"54" 54.000 2.571 48.549 182.70 2.077 49.597 149.11 1.662 50.477 120.33 54"
80 psiDR 21.0 DR 26.0 DR 32.5
Pressure 130 psi
Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter is calculated using nomnal OD and Minimum wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing components to fit the pipe ID, refer to pipe dimension and tolerances in the applicable pipe manufacturing specification.
100 psi 65 psiRating DR 17.0
13
02/13
IPS Size and Dimension Data PE3608 (PE3408)
Pressure Ratings are calculated using 0.50 design factor for HDS at 73°F as listed in PPI TR-4 for PE 3608 materials. Temperature, Chemical, and Environmental use considerations may require use of additional design factors.
IPS Pipe Size
Nominal OD (in)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
IPS Pipe Size
1 1/4" 1.660 0.227 1.179 0.44 0.184 1.270 0.37 0.151 1.340 0.31 0.123 1.399 0.26 1 1/4"1 1/2" 1.900 0.260 1.349 0.58 0.211 1.453 0.49 0.173 1.533 0.41 0.141 1.601 0.34 1 1/2"
2" 2.375 0.325 1.686 0.91 0.264 1.815 0.76 0.216 1.917 0.64 0.176 2.002 0.53 2"3" 3.500 0.479 2.485 1.98 0.389 2.675 1.66 0.318 2.826 1.39 0.259 2.951 1.15 3"4" 4.500 0.616 3.194 3.27 0.500 3.440 2.74 0.409 3.633 2.29 0.333 3.794 1.90 4"6" 6.625 0.908 4.700 7.09 0.736 5.065 5.93 0.602 5.349 4.97 0.491 5.584 4.13 6"8" 8.625 1.182 6.119 12.01 0.958 6.594 10.05 0.784 6.963 8.42 0.639 7.270 7.00 8"10" 10.750 1.473 7.627 18.66 1.194 8.219 15.61 0.977 8.679 13.09 0.796 9.062 10.87 10"12" 12.750 1.747 9.046 26.25 1.417 9.746 21.97 1.159 10.293 18.41 0.944 10.749 15.29 12"14" 14.000 1.918 9.934 31.64 1.556 10.701 26.50 1.273 11.301 22.20 1.037 11.802 18.44 14"16" 16.000 2.192 11.353 41.33 1.778 12.231 34.60 1.455 12.915 29.00 1.185 13.488 24.09 16"18" 18.000 2.466 12.772 52.31 2.000 13.760 43.79 1.636 14.532 36.69 1.333 15.174 30.48 18"20" 20.000 2.740 14.191 64.58 2.222 15.289 54.05 1.818 16.146 45.30 1.481 16.860 37.63 20"22" 22.000 3.014 15.610 78.14 2.444 16.819 65.40 2.000 17.760 54.82 1.630 18.544 45.56 22"24" 24.000 3.288 17.029 93.00 2.667 18.346 77.85 2.182 19.374 65.24 1.778 20.231 54.21 24"26" 26.000 2.889 19.875 91.36 2.364 20.988 76.57 1.926 21.917 63.62 26"28" 28.000 3.111 21.405 105.95 2.545 22.605 88.78 2.074 23.603 73.78 28"30" 30.000 3.333 22.934 121.62 2.727 24.219 101.92 2.222 25.289 84.69 30"32" 32.000 2.909 25.833 115.97 2.370 26.976 96.35 32"34" 34.000 3.091 27.447 130.93 2.519 28.660 108.81 34"36" 36.000 3.273 29.061 146.80 2.667 30.346 121.98 36"42" 42.000 3.111 35.405 166.00 42"48" 48.000 48"54" 54.000 54"
200 psi
Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter is calculated using nomnal OD and Minimum wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing components to fit the pipe ID, refer to pipe dimensions and tolerances in the applicable pipe manufacturing specification.
DR 13.5Pressure 255 psi 160 psi 130 psi
Rating DR 7.3 DR 9.0 DR 11.0
14
02/13
IPS Size and Dimension Data PE3608 (PE3408
Pressure Ratings are calculated using 0.50 design factor for HDS at 73°F as listed in PPI TR-4 for PE 3608 materials.Temperature, Chemical, and Environmental use considerations may require use of additional design factors.
IPS Pipe Size
Nominal OD (in)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
IPS Pipe Size
1 1/4" 1.660 1 1/4"1 1/2" 1.900 1 1/2"
2" 2.375 0.140 2.078 0.43 2"3" 3.500 0.206 3.063 0.93 3"4" 4.500 0.265 3.938 1.54 0.214 4.046 1.26 4"6" 6.625 0.390 5.798 3.34 0.315 5.957 2.73 0.255 6.084 2.23 0.204 6.193 1.80 6"8" 8.625 0.507 7.550 5.65 0.411 7.754 4.64 0.332 7.921 3.79 0.265 8.063 3.05 8"10" 10.750 0.632 9.410 8.78 0.512 9.665 7.21 0.413 9.874 5.87 0.331 10.048 4.75 10"12" 12.750 0.750 11.160 12.36 0.607 11.463 10.13 0.490 11.711 8.26 0.392 11.919 6.67 12"14" 14.000 0.824 12.253 14.91 0.667 12.586 12.22 0.538 12.859 9.96 0.431 13.086 8.05 14"16" 16.000 0.941 14.005 19.46 0.762 14.385 15.96 0.615 14.696 13.01 0.492 14.957 10.50 16"18" 18.000 1.059 15.755 24.64 0.857 16.183 20.19 0.692 16.533 16.47 0.554 16.826 13.30 18"20" 20.000 1.176 17.507 30.41 0.952 17.982 24.93 0.769 18.370 20.34 0.615 18.696 16.41 20"22" 22.000 1.294 19.257 36.80 1.048 19.778 30.18 0.846 20.206 24.61 0.677 20.565 19.86 22"24" 24.000 1.412 21.007 43.81 1.143 21.577 35.91 0.923 22.043 29.30 0.738 22.435 23.62 24"26" 26.000 1.529 22.759 51.39 1.238 23.375 42.14 1.000 23.880 34.39 0.800 24.304 27.74 26"28" 28.000 1.647 24.508 59.62 1.333 25.174 48.86 1.077 25.717 39.88 0.862 26.173 32.19 28"30" 30.000 1.765 26.258 68.45 1.429 26.971 56.12 1.154 27.554 45.78 0.923 28.043 36.93 30"32" 32.000 1.882 28.010 77.86 1.524 28.769 63.84 1.231 29.390 52.10 0.985 29.912 42.04 32"34" 34.000 2.000 29.760 87.91 1.619 30.568 72.06 1.308 31.227 58.81 1.046 31.782 47.43 34"36" 36.000 2.118 31.510 98.57 1.714 32.366 80.78 1.385 33.064 65.94 1.108 33.651 53.20 36"42" 42.000 2.471 36.761 134.16 2.000 37.760 109.97 1.615 38.576 89.71 1.292 39.261 72.37 42"48" 48.000 2.824 42.013 175.23 2.286 43.154 143.65 1.846 44.086 117.18 1.477 44.869 94.56 48"54" 54.000 2.571 48.549 181.75 2.077 49.597 148.33 1.662 50.477 119.70 54"
a
80 psi 50 psiRating DR 17.0 DR 21.0 DR 26.0 DR 32.5
Pressure 100 psi 65 psi
15
02/13
DIPS Size and Dimension Data PE3608 (PE3408)
Pressure Ratings are calculated using 0.50 design factor for HDS at 73°F as listed in PPI TR-4 for PE 3608 materials.Temperature, Chemical, and Environmental use considerations may require use of additional design factors.
DIPS Pipe Size
Nominal OD (in)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
IPS Pipe Size
4" 4.800 0.658 3.405 3.72 0.533 3.670 3.11 0.436 3.876 2.61 0.356 4.045 2.17 4"6" 6.900 0.945 4.897 7.68 0.767 5.274 6.44 0.627 5.571 5.39 0.511 5.817 4.48 6"8" 9.050 1.240 6.421 13.22 1.006 6.917 11.07 0.823 7.305 9.28 0.670 7.630 7.70 8"10" 11.100 1.521 7.875 19.90 1.233 8.486 16.65 1.009 8.961 13.95 0.822 9.357 11.59 10"12" 13.200 1.808 9.367 28.13 1.467 10.090 23.55 1.200 10.656 19.73 0.978 11.127 16.40 12"14" 15.300 2.096 10.856 37.79 1.700 11.696 31.64 1.391 12.351 26.51 1.133 12.898 22.02 14"16" 17.400 2.384 12.346 48.89 1.933 13.302 40.91 1.582 14.046 34.29 1.289 14.667 28.49 16"18" 19.500 2.671 13.837 61.38 2.167 14.906 51.40 1.773 15.741 43.07 1.444 16.439 35.77 18"20" 21.600 2.400 16.512 63.05 1.964 17.436 52.85 1.600 18.208 43.91 20"24" 25.800 2.867 19.722 89.97 2.345 20.829 75.38 1.911 21.749 62.64 24"30" 32.000 2.909 25.833 115.97 2.370 26.976 96.35 30"†36" 38.300 3.482 30.918 166.15 2.837 32.286 138.04 †36"†42" 44.500 3.296 37.512 186.34 †42"
DIPS Pipe Size
Nominal OD (in)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
IPS Pipe Size
4" 4.800 0.282 4.202 1.75 0.229 4.315 1.44 4"6" 6.900 0.406 6.039 3.62 0.329 6.203 2.97 0.265 6.338 2.42 0.212 6.451 1.95 6"8" 9.050 0.532 7.922 6.22 0.431 8.136 5.11 0.348 8.312 4.17 0.278 8.461 3.36 8"10" 11.100 0.653 9.716 9.37 0.529 9.979 7.69 0.427 10.195 6.27 0.342 10.375 5.06 10"12" 13.200 0.776 11.555 13.24 0.629 11.867 10.87 0.508 12.123 8.87 0.406 12.339 7.15 12"14" 15.300 0.900 13.392 17.80 0.729 13.755 14.60 0.588 14.053 11.90 0.471 14.301 9.61 14"16" 17.400 1.024 15.229 23.03 0.829 15.643 18.88 0.669 15.982 15.39 0.535 16.266 12.42 16"18" 19.500 1.147 17.068 28.91 0.929 17.531 23.71 0.750 17.910 19.34 0.600 18.228 15.60 18"20" 21.600 1.271 18.905 35.49 1.029 19.419 29.10 0.831 19.838 23.74 0.665 20.190 19.16 20"24" 25.800 1.518 22.582 50.63 1.229 23.195 41.51 0.992 23.697 33.85 0.794 24.117 27.32 24"30" 32.000 1.882 28.010 77.86 1.524 28.769 63.84 1.231 29.390 52.10 0.985 29.912 42.04 30"†36" 38.300 2.253 33.524 111.55 1.824 34.433 91.45 1.473 35.177 74.61 1.178 35.803 60.18 †36"†42" 44.500 2.618 38.950 150.60 2.119 40.008 123.44 1.712 40.871 100.75 1.369 41.598 81.25 †42"Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter is calculated using Nominal OD and Minimum Wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing components to fit the pipe ID, refer to pipe dimensions and tolerances in the applicable pipe manufacturing specification.
80 psi
200 psi
50 psi
DR 13.5Pressure 255 psi
Rating DR 17.0 DR 21.0 DR 26.0 DR 32.5Pressure 100 psi
160 psi
65 psi
130 psiRating DR 7.3 DR 9.0 DR 11.0
16
02/13
DIPS Size and Dimension Data PE4710 (PE3408)
Pressure Ratings are calculated using 0.63 design factor for HDS at 73°F as listed in PPI TR-4 for PE4710 materials. Temperature, Chemical, and Environmental use considerations may require use of additional design factors.
DIPS Pipe Size
Nominal OD (in)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
IPS Pipe Size
4" 4.800 0.658 3.405 3.74 0.533 3.670 3.13 0.436 3.876 2.62 0.356 4.045 2.18 4"6" 6.900 0.945 4.897 7.73 0.767 5.274 6.47 0.627 5.571 5.42 0.511 5.817 4.50 6"8" 9.050 1.240 6.421 13.29 1.006 6.917 11.13 0.823 7.305 9.33 0.670 7.630 7.74 8"10" 11.100 1.521 7.875 20.00 1.233 8.486 16.73 1.009 8.961 14.03 0.822 9.357 11.65 10"12" 13.200 1.808 9.367 28.27 1.467 10.090 23.68 1.200 10.656 19.84 0.978 11.127 16.49 12"14" 15.300 2.096 10.856 37.99 1.700 11.696 31.80 1.391 12.351 26.65 1.133 12.898 22.14 14"16" 17.400 2.384 12.346 49.14 1.933 13.302 41.13 1.582 14.046 34.47 1.289 14.667 28.64 16"18" 19.500 2.671 13.837 61.70 2.167 14.906 51.67 1.773 15.741 43.30 1.444 16.439 35.96 18"20" 21.600 2.400 16.512 63.38 1.964 17.436 53.13 1.600 18.208 44.14 20"24" 25.800 2.867 19.722 90.44 2.345 20.829 75.77 1.911 21.749 62.97 24"30" 32.000 2.909 25.833 116.58 2.370 26.976 96.86 30"†36" 38.300 3.482 30.918 167.02 2.837 32.286 138.77 †36"†42" 44.500 3.296 37.512 187.32 †42"
DIPS Pipe Size
Nominal OD (in)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
Minimum Wall (in)
Average ID (in)
Weight (lbs/ft)
IPS Pipe Size
4" 4.800 0.282 4.202 1.76 0.229 4.315 1.45 4"6" 6.900 0.406 6.039 3.64 0.329 6.203 2.99 0.265 6.338 2.43 0.212 6.451 1.96 6"8" 9.050 0.532 7.922 6.26 0.431 8.136 5.13 0.348 8.312 4.19 0.278 8.461 3.37 8"10" 11.100 0.653 9.716 9.42 0.529 9.979 7.73 0.427 10.195 6.30 0.342 10.375 5.09 10"12" 13.200 0.776 11.555 13.31 0.629 11.867 10.93 0.508 12.123 8.91 0.406 12.339 7.19 12"14" 15.300 0.900 13.392 17.89 0.729 13.755 14.68 0.588 14.053 11.96 0.471 14.301 9.66 14"16" 17.400 1.024 15.229 23.15 0.829 15.643 18.98 0.669 15.982 15.48 0.535 16.266 12.48 16"18" 19.500 1.147 17.068 29.07 0.929 17.531 23.84 0.750 17.910 19.44 0.600 18.228 15.69 18"20" 21.600 1.271 18.905 35.68 1.029 19.419 29.25 0.831 19.838 23.86 0.665 20.190 19.26 20"24" 25.800 1.518 22.582 50.89 1.229 23.195 41.73 0.992 23.697 34.03 0.794 24.117 27.46 24"30" 32.000 1.882 28.010 78.26 1.524 28.769 64.18 1.231 29.390 52.37 0.985 29.912 42.26 30"†36" 38.300 2.253 33.524 112.13 1.824 34.433 91.93 1.473 35.177 75.00 1.178 35.803 60.49 †36"†42" 44.500 2.618 38.950 151.39 2.119 40.008 124.09 1.712 40.871 101.28 1.369 41.598 81.68 †42"
†OD available upon special request --
Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter is calculated using Nominal OD and Minimum Wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing components to fit the pipe ID, refer to pipe
100 psi
255 psi
65 psi
DR 13.5Pressure 320 psi
Rating DR 17.0 DR 21.0 DR 26.0 DR 32.5Pressure 130 psi
200 psi
80 psi
160 psiRating DR 7.3 DR 9.0 DR 11.0
17
02/13
IPS FLANGE ADAPTER
Weight Per Item(lbs) List Price Part #Nominal Size
Actual ODPressure
Class (psi) SDR DimensionsAxTxC(in)
ON FLG ADPT SIZES 14" - 24" SDR11 AND 17 ONLY QUANTITY DISCOUNTS ARE AVAILABLE 6-10 PCS
11 PCS AND OVER
CFP = CALL FOR PRICING
160 DR 11 0.10 PEI11ABFF
200 DR 9 0.10 PEI9ABFF
267 DR 7 0.10 PEI7ABFF
160 DR 11 0.20 PEI11ABFG
200 DR 9 0.20 PEI9ABFG
267 DR 7 0.20 PEI7ABFG
160 DR 11 0.30 PEI11ABFHIPS1 1/4" 00 0 39 2 80
IPS3/4"1.050"
4.00 X 0.39 X 1.85
IPS1"
1.315"4.00 X 0.39 X 2.36
200 DR 9 0.30 PEI9ABFH
267 DR 7 0.30 PEI7ABFH
160 DR 11 0.35 PEI11ABFJ
200 DR 9 0.35 PEI9ABFJ
267 DR 7 0.40 PEI7ABFJ
160 DR 11 0.33 PEI11ABFK
200 DR 9 0.40 PEI9ABFK
267 DR 7 0.47 PEI7ABFK
1-1/4"1.660"
4.00 X 0.39 X 2.80
IPS1-1/2"1.660"
4.00 X .39 X 3.15
IPS2"
2.3756.00 X 0.40 X 4.00
160 DR 11 0.75 PEI11ABFL
200 DR 9 0.75 PEI9ABFL
267 DR 7 0.80 PEI7ABFL100 DR 17 0.83 PEI17ABFM160 DR 11 0.83 PEI11ABFM200 DR 9 1.20 PEI9ABFM267 DR 7 1.25 PEI7ABFM100 DR 17 1.70 PEI17ABFP
IPS*2-1/2"
2.875"6.00 X .60 X 5.00
IPS3"
3.50"6.00 X .60 X 5.00
IPS 6.00 X .80 X 6.60160 DR 11 1.70 PEI11ABFP200 DR 9 2.10 PEI9ABFP267 DR 7 2.30 PEI7ABFP100 DR 17 2.50 PEI17ABFS
160 DR 11 2.50 PEI11ABFS
200 DR 9 2.50 PEI9ABFS100 DR 17 5 PEI17ABFU160 DR 11 6 PEI11ABFU200 DR 9 7 PEI9ABFU
IPS 5"
5.563"
4"4.50"
6.00 X .80 X 6.60
6.00 X .80 X 6.00
IPS6"
8.00 X .64 X 7.50
8.00 X .98 X 7.50
8.00 X .80 X 8.50
200 DR 9 7 PEI9ABFU267 DR 7 7 PEI7ABFU100 Dr 17 6 PEI17ABFX160 DR 11 6 PEI11ABFX200 DR 9 7 PEI9ABFX267 DR 7 11 PEI7ABFX
6.625 8.13 X 1.10 X 8.13
IPS8"
8.625
9.00 X .80 X 10.60
8.63 X 1.40 X 10.75
Dimensions and weights are approximate and subject to change
IPS FLANGE ADAPTER
Weight Per Item(lbs) List Price Part #Nominal Size
Actual ODPressure
Class (psi) SDR DimensionsAxTxC(in)
ON FLG ADPT SIZES 14" - 24" SDR11 AND 17 ONLY QUANTITY DISCOUNTS ARE AVAILABLE 6-10 PCS
11 PCS AND OVER
CFP = CALL FOR PRICING
100 DR 17 10 PEI17ABF10160 DR 11 10 PEI11ABF10200 DR 9 17 PEI9ABF10267 DR 7 25 PEI7ABF10100 DR 17 18 PEI17ABF12160 DR 11 18 PEI11ABF12200 DR 9 26 PEI9ABF12267 DR 7 29 PEI7ABF12100 DR 17 28 PEI17ABF14
IPS10"10.75
9.00 X .90 X 12.809.00 X 1.30 X 12.80
8.75 X 1.70 X 12.75
IPS12"
12.75"
S
10.8 X 1.00 X 15.0010.80 X 1.50 X 15.00
9.13 X 2.10 X 15.50
11 00 X 1 10 X 17 50100 DR 17 28 PEI17ABF14160 DR 11 28 PEI11ABF14200 DR 9 28 PEI9ABF14267 DR 7 41 PEI7ABF14100 DR 17 37 PEI17ABF16160 DR 11 37 PEI11ABF16200 DR 9 37 PEI9ABF16267 DR 7 53 PEI7ABF16100 DR 17 44 PEI17ABF18160 DR 11 44 PEI11ABF18
IPS14"
14.00"
11.00 X 1.10 X 17.5011.00 X 1.70 X 17.50
12.00 X 2.35 X 17.00
IPS16"
16.00"
IPS
12.00 X 1.20 X 20.0012.00 X 1.90 X 20.00
12.00 X 2.60 X 19.50
12.00 X 1.40 X 21.1012 00 X 2 10 X 21 10160 DR 11 44 PEI11ABF18
200 DR 9 44 PEI9ABF18267 DR 7 64100 DR 17 56 PEI17ABF20160 DR 11 56 PEI11ABF20200 DR 9 56 PEI9ABF20267 DR 7 62 PEI7ABF20100 DR 17 68 PEI17ABF22
160 DR 11 68 PEI11ABF22
18"18.00"
12.00 X 2.10 X 21.10
12.00 X 3.00 X 21.13
IPS 20"
20.00"
IPS 22"
12.00 X 1.50 X 23.5012.00 X 2.30 X 23.50
CALL
12.00 X 1.60 X 25.60
12.00 X 2.50 X 25.60
200 DR 9 68 PEI9ABF22
100 DR 17 83 PEI17ABF24
160 DR 11 83 PEI11ABF24
200 DR 9 83 PEI9ABF24
100 DR 17 87 PEI17ABF26
160 DR 11 117 PEI11ABF26
22.00" CALL
IPS 24"
24.00"
CALL
CALL
IPS 26"
26.00"
14.00 X 1.80 X 27.90
14.00 X 2.90 X 27.90
CALL
160 DR 11 117 PEI11ABF26
50-100DR 32.5-17
90 PEIPS17BFA28
160 DR 11 129 PEI11ABF28
CALL
IPS 28"
28.00"
CALL
CALL
Dimensions and weights are approximate and subject to change
IPS FLANGE ADAPTER
Weight Per Item(lbs) List Price Part #Nominal Size
Actual ODPressure
Class (psi) SDR DimensionsAxTxC(in)
ON FLG ADPT SIZES 14" - 24" SDR11 AND 17 ONLY QUANTITY DISCOUNTS ARE AVAILABLE 6-10 PCS
11 PCS AND OVER
CFP = CALL FOR PRICING
50-100DR 32.5-17
98 PEI17HBF30
160 DR 11 134 PEI11ABF30
50 DR 32.5 95 PEI32ABF32
100 DR 17 106 PEI17HBF32
IPS 30"
30.00"
CALL
CALL
IPS 32"
32.00"CALL
50 DR 32.5 120 PEI32ABF34
100 DR 17 135 PEI17ABF34
IPS 34"
34.00"CALL
50 DR 32.5 130 PEI32HBF36
50-100DR 32.5-17
141 PEI17HBF36
50-100DR
152PEI26HBF42
IPS 36"
36.00"CALL
IPS 42" CALL50-100
32.5-21152
PEI32HBF42
50 DR 32.5 150 PEI32ABF48
65 DR 26 170 PEI26ABF48
4242.00"
CALL
IPS 48"
48.00"CALL
50 DR 32.5 230 PEI26ABF54
65 DR 26 PEI32ABF54
CALLIPS 54"
54.00"CALL
Dimensions and weights are approximate and subject to change
Prior to ordering Specific valve information including manufacturer,model number, disc diameter, and center to face dims
of valve is required
SDR Weight Li t P i
IPS BEVELED BFV FLANGE ADAPTER
Nominal SizePressure
Cl Dimensions Dimension
17 100 PEI17HBFBEVP11 160 PEI11HBFBEVP
17 100 PEI17HBFBEVU
11 160 PEI11HBFBEVU
17 100 PEI17HBFBEVX
11 160 PEI11HBFBEVX
17 100 PEI17HBFBEV10
SDR
1.25
61.50
10"
Part #
8"8.625"
810.75X9.5 1.75
6"6.625"
8.625X8.50
4"4.5000"
56.625X6.50
Weight(lbs) List PriceNominal Size
Actual ODClass (psi)
DimensionsBxL(in)
DimensionT (in)
17 100 PEI17HBFBEV1011 160 PEI11HBFBEV10
17 100 PEI17HBFBEV1211 160 PEI11HBFBEV12
Butterfly valve flange adapters should always be tested to fit to the actual valve and then field tested for valve disk clearance and full rotation prior to butt fusion of the flange to the pipeline. After butt fusion and bolt up of flange repeat this trial at each occurrence to insure final install
is properly centered, thus again allowing valve disk clearance and full rotation.
12.75X9.5 2.00
12"12.750"
19
10"10.750"
12
15X11.50 2.25
The above requirement insures proper valve operation prior to burial and also will identify unexpectedsituations including valve design changes or valve substitutions at the project.
Larger sizes available upon request
Dimensions and weights are approximate and subject to change
160 PED11ABFP200 PED9ABFP
160 PED11ABFU200 PED9ABFU
160 PED11ABFX200 PED9ABFX
160 PED11ABF10200 PED9ABF10
160 PED11ABF12200 PED9ABF12
160 PED11ABF14200 PED9ABF14
160 PED11ABF16200 PED9ABF16
160 PED11ABF18200 PED9ABF18
160 PED11ABF20200 PED9ABF20
160 PED11ABF24
200 PED9ABF24
16030"
32.000" 34.30 X 14 3.64 114
16"17.400"
4.10
20"21.600"
23 1/4 x12 2.200 563.40
24"25.80" 27 5/8 x 12
2.683
18"19.500" 21 X 12 2.0 44.0
3.10
19 5/8 x 121
37.0
2.46
200
14"15.300" 17 1/8 x 12
1.5828
2.13 26
12"13.200"
1.47 11
8"9.050"
15 1/2 x 111.37 181.80 17
PED11ABF30
DIPS FLANGE ADAPTER
Nominal SizeActual OD
Dr/Pressure Class (psi)
DimensionsBxC(in)
DimensionT (in)
6"6.900"
8 3/16 x 8 0.740 4
6 5/16 x 60.53
2.0
10 3/8 x 90.96 6
4"4.80" 0.80
1.14 6
10"11.100"
12 3/4 x 91.16 10
Weight perPackage(lbs
List Price Part #
Dimensions and weights are approximate and subject to change22
02/13
100 PEI17HBSE14F160 PEI11HBSE14F200 PEI9HBSE14F267 PEI7HBSE14F
100 PEI17HBSE16F160 PEI11HBSE16F200 PEI9HBSE16F267 PEI7HBSE16F
PEI32HBSE18F65 PEI26HBSE18F80 PEI21HBSE18F100 PEI17HBSE18F160 PEI11HBSE18F200 PEI9HBSE18F267 PEI7HBSE18F
100 PEI17HBSE20F160 PEI11HBSE20F200 PEI9HBSE20F267 PEI7HBSE20F
100 PEI17HBSE22F160 PEI11HBSE22F200 PEI9HBSE22F267 PEI7HBSE22F
100 PEI17HBSE24F160 PEI11HBSE24F200 PEI9HBSE24F
267 PEI7HBSE24F
100 PEI17HBSE26F128160 PEI11HBSE26F
24"24.000"
27 11/16 x 5
2.50
26"26.000"
30.00 X 4.001.91 28
2.95 36
38
3.20 33
3.80 45
22"22.000"
25 1/4 x 52.30 36
3.50 39
16"16.000"
19 1/2 x 5
20"20.000"
23 5/16 x 52.10
1.66
29
18"18.000" 20 1/8 x 5
1.90 20
2.90 32
16
Weight perPackage(lbs List Price
2.58 30
Part #
14"14.000"
17 x 51.45 13
2.26 23
CFP = CALL FOR PRICING
IPS STUB END
Nominal SizeActual OD
Pressure Class (psi)
DimensionsBxC(in)
DimensionT (in)
Dimensions and weights are approximate and subject to change23
02/13
Weight perPackage(lbs List Price Part #
CFP = CALL FOR PRICING
IPS STUB END
Nominal SizeActual OD
Pressure Class (psi)
DimensionsBxC(in)
DimensionT (in)
5065 PEI26HBSE28F100 PEI17HBSE28F160 PEI11HBSE28F
65 PEI26HBSE30F100 PEI17HBSE30F128 PEI11HBSE30F
65 PEI26HBSE32F80 PEI21HBSE32F
100 PEI17HBSE32F
65 PEI26HBSE34F80 PEI21HBSE34F
100 PEI17HBSE34F50 PEI32HBSE36F65 PEI26HBSE36F
100PEI17HBSE36F
65 PEI26HBSE42F
100PEI17HBSE42F
50 PEI32HBSE48F
65PEI26HBSE48F
50 PEI32HBSE54F
65PEI26HBSE54F
48"48.000"
54.00 X 4.50 2.60 87
54"54.000"
60.00 X 4.50 2.60 152
36"36.000"
40.80 X 4.00 2.65 67
42"42.000"
47.50 X 4.50 3.09 82
32"32.000"
36.50 X 4.00 2.35 51
34"34.000"
38.50 X 4.00 2.5 59
34.30 X 5.00 3.41 53
30"30.000"
34.30 X 4.00 2.21 42
28"28.000"
32.30 X 4.00 2.21 34
32.30 X 4.80 3.18 44
Dimensions and weights are approximate and subject to change24
02/13
Pressure Class (psi)
Part #
128 PED17HBSE10F160 PED11HBSE10F200 PED9HBSE10F
128 PED17HBSE12F160 PED11HBSE12F200 PED9HBSE12F
128 PED17HBSE14F160 PED11HBSE14F200 PED9HBSE14F
128 PED17HBSE16F160 PED11HBSE16F200 PED9HBSE16F
128 PED17HBSE18F160 PED11HBSE18F200 PED9HBSE18F
128 PED17HBSE20F160 PED11HBSE20F200 PED9HBSE20F
128 PED17HBSE24F160 PED11HBSE24F200 PED9HBSE24F
128 PED17HBSE30F
160 PED11HBSE30F
CFP= CALL FOR PRICING
16"17.400"
20"21.600" 23 1/4 x 5 2.2 29
3.4 33
18"19.50000"
24"25.800" 27 5/8 X 5 2.6 35
30" 32.00" 34.30 X 5 3.64 110
4.1 45
21 x 5 220
3.1 32
19 5/8 x 4
2.1
2.8 30
29
2.46 23
2.13
14"15.300" 17 1/8 x 4
1.9
20
12"13.200"
15 1/2 x 4 1.37 11
DIPS STUB END
Weight perPackage(lbs List PriceNominal Size
Actual ODDimensions
BxC(in)
10"11.100 12 3/4 x 4 1.16 7
DimensionT (in)
1.8
Dimensions and weights are approximate and subject to change
25
02/13
Nominal size
PressureClass(psi)
DimensionsB.C. xT (in)
Weight per Item(lbs)
Bolt Diameter
Bolt Number
List Price Part #
2"2.375"
Non Pressure 4 3/4 x 1 2 0.625 4 PEIHBBFKF
3"3.500"
Non Pressure 6 x 1 2 0.625 4 PEIHBBFMF
4"4.500"
Non Pressure 7 1/2 x 1 3 0.625 8 PEIHBBFPF
6"6.625"
Non Pressure 9 1/2 x1 4 0.75 8 PEIHBBFUF
8"8.625"
Non Pressure 11 3/4 x 1 6 0.75 8 PEIHBBFXF
10"10.750"
Non Pressure 14 1/4 x 1 9 0.875 12 PEIHBBF10F
12"12.750"
Non Pressure 17 x 1 13 0.875 12 PEIHBBF12F
14"14.00"
Non Pressure 18 3/4 x 1 15 1 12 PEIHBBF14F
16"16.00"
Non Pressure 21 1/4 x 1 19 1 16 PEIHBBF16F
18"18.00"
Non Pressure 22 3/4 x 1 22 1.125 16 PEIHBBF18F
20"20.000"
Non Pressure 25 x 1 20 1.125 20 PEIHBBF20F
22"22.000"
Non Pressure 27 1/4 x 1 30 1.25 20 PEIHBBF22F
24"24.000"
Non Pressure 29 1/2 x 1 36 1.25 20 PEIHBBF24F
26"26.000"
Non Pressure 31 3/4 x 1 61 1.25 24 PEIHBBF26F
28"28.000"
Non Pressure 34 x 1 1/2 69 1.25 28 PEIHBBF28F
30"30.000"
Non Pressure 36 x 1 1/2 78 1.25 28 PEIHBBF30F
32"32.000"
Non Pressure 38 1/2 x 1 1/2 91 1.5 28 PEIHBBF32F
34"34.000"
Non Pressure 40 1/2 x 1 1/2 99 1.5 32 PEIHBBF34F
IPS HDPE BLIND FLANGE
Dimensions and weights are approximate and subject to change26
02/13
IPS HDPE BLIND FLANGE
36"36.000"
Non Pressure 42 3/4 x 1 1/2 110 1.5 32 PEIHBBF36F
42"42.000"
Non Pressure 49 1/2 x 2 147 1.5 36 PEIHBBF42F
48"48.000"
Non Pressure 56 x 2 244 1.5 44 PEIHBBF48F
54"54.000"
Non Pressure 62 3/4 x 2 303 1.75 44 PEIHBBF54F
Dimensions and weights are approximate and subject to change27
02/13
Pipe Outside Flange Inside Bolt Dia. Bolt Radius Weight Operating
Diameter Dia.Thicknes
s Dia. Count Bolt Hole Circle r lbs/pc PressureO.D. T I.D. N B.D. B.C.
1/2” 3.5 0.5 0.9 4 0.63 2.38 0.13 1 267
3/4” 3.88 0.5 1.11 4 0.63 2.75 0.13 1 267IBUPSDR70075C
1” 4.25 0.56 1.38 4 0.63 3.13 0.13 1 267IBUPSDR701C
1 1/4” 4.63 0.63 1.72 4 0.63 3.5 0.19 2 267IBUPSDR70125C
1 1/2” 5 0.69 1.97 4 0.63 3.88 0.25 2 267IBUPSDR70150C
2” 6 0.75 2.46 4 0.75 4.75 0.31 3 267IBUPSDR702C
2” 6 0.5 2.63 4 0.75 4.75 0.2 1.5 160IBUPSDR1102B
2 1/2” 7 0.88 2.97 4 0.75 5.5 0.31 4 267IBUPSDR70250C
3” 7.5 0.94 3.6 4 0.75 6 0.4 4 267IBUPSDR703C
3” 7.5 0.53 3.75 4 0.75 6 0.28 2.5 160IBUPSDR1103B
4” 9 0.94 4.6 8 0.75 7.5 0.4 5.5 267IBUPSDR704C
4” 9 0.55 4.75 8 0.75 7.5 0.28 3.5 160IBUPSDR1104B
5” 10 0.94 5.69 8 0.88 8.5 0.44 6 267IBUPSDR705C
6” 11 1 6.75 8 0.88 9.5 0.4 7 267IBUPSDR706C
6” 11 0.63 6.88 8 0.88 9.5 0.28 4.5 160IBUPSDR1106B
8” 13.5 1.12 8.75 8 0.88 11.75 0.4 11 267IBUPSDR708C
8” 13.5 0.85 8.88 8 0.88 11.75 0.28 8 160IBUPSDR1108B
10” 16 1.19 10.92 12 1 14.25 0.4 16 267IBUPSDR710C
10” 16 0.98 11 12 1 14.25 0.31 12 160IBUPSDR1110B
12” 19 1.5 12.92 12 1 17 0.4 23 267IBUPSDR712C
12” 19 1.25 13.13 12 1 17 0.28 20 160IBUPSDR1112B
14” 21 1.63 14.18 12 1.13 18.75 0.4 37 267IBUPSDR714C
14” 21 1.38 14.38 12 1.13 18.75 0.31 30 160IBUPSDR1114B
16” 23.5 1.88 16.19 16 1.13 21.25 0.4 49 267IBUPSDR716C
16” 23.5 1.65 16.38 16 1.13 21.25 0.35 40 160IBUPSDR1116B
18” 25 1.8 18.2 16 1.25 22.75 0.4 48 267
18” 25 1.75 18.2 16 1.25 22.75 0.4 48 200
18” 25 1.67 18.38 16 1.25 22.75 0.35 45 160IBUPSDR1118B
LIST
PRICE
FERGUSON PART #
CONVOLUTED DI BACK UP FLANGES CFP = CALL FOR PRICE
28
02/13
Pipe Outside Flange Inside Bolt Dia. Bolt Radius Weight Operating
Diameter Dia.Thicknes
s Dia. Count Bolt Hole Circle r lbs/pc PressureO.D. T I.D. N B.D. B.C.
LIST
PRICE
FERGUSON PART #
CONVOLUTED DI BACK UP FLANGES CFP = CALL FOR PRICE
20” 27.5 2.06 20.38 20 1.25 25 0.31 61 200
20” 27.5 1.81 20.38 20 1.25 25 0.4 55 160IBUPSDR1120B
22” 29.5 2.13 22.38 20 1.38 27.25 0.31 72 200
22” 29.5 2 22.38 20 1.38 27.25 0.37 65 160IBUPSDR1122B
24” 32 2.13 24.38 20 1.38 29.5 0.31 91 200
24” 32 2.17 24.38 20 1.38 29.5 0.4 80 160IBUPSDR1124B
30" 38.75 2.5 30.38 28 1.38 36 0.31 143 128IBUPSDR13530B
36" 46 2.06 36.38 32 1.63 42.75 0.5 129 50IBUPSDR32536B
1. Operating pressure on an HDPE flange adapter with a safety factor of 2.
29
02/13
160 DR 11 PEI11HMJSSM
160 DR 11 PEI11HMJSSP
160 DR 11 PEI11HMJSSU
160 DR 11 PEI11HMJSSX
160 DR 11 PEI11HMJSS10
160 DR 11 PEI11HMJSS12
SEE IPS/DIPS ACCY KIT PRICE SHEET
12"12.750" 13.00 6 8 12.75
10"10.750" 13.56 6 8
8"8.625" 11.94 5 6 8.62
10.75
List Pricewith
Stiffener
6"6.625" 11.31 5 4
4"4.5000" 10.25 4 1/2 4 4.50
6.62
Part #Bolt Length
Numberof Bolts
IPS FAB MJ ADAPTER
Nominal Size
Actual OD
Pressure Class (psi)
FeedStock
DimensionA (in)
Less Accy KitDimension
J (in)
3.503"3.5000" 9.00 5 4
Dimensions and weights are approximate and subject to change30
02/13
160 DR 11 PED11HMJP200 DR 9
160 DR 11 PED11HMJU200 DR 9
160 DR 11 PED11HMJX200 DR 9
160 DR 11 PED11HMJ10200 DR 9
160 DR 11 PED11HMJ12200 DR 9
160 DR 11 PED11HMJ14200 DR 9
160 DR 11 PED11HMJ16200 DR 9
W/STIFFNER160 DR 11 PED11HMJ18200 DR 9 CFP
W/STIFFNER160 DR 11 PED11HMJ20200 DR 9 CFP
W/STIFFNER160 DR 11 PED11HMJ24200 DR 9 CFP
INDUSTRIAL PLASTICS NORMALLY STOCKS THESE ITEMS
MJ ONLY SEE SEPARATE SHEET FOR ACCY KIT
21.60
25.80
Part #LIST PRICE
W/STIFFNER W/KIT
Numberof Bolts
List Price Without Stiffiner
with kit
4
DIPS FAB MJ ADAPTER
6.90
4"4.800"
CFP = CALL FOR PRICINGLess Accy Kit
4
Bolt Length
5
DimensionA (in)
FeedStock
10.25 4 1/2
Nominal SizeActual OD Dimension
J (in)
Pressure Class (psi)
6"6.900" 11.31
4.80
10"11.100" 13.56 6 8 11.10
8"9.050" 14.00 5 6 9.05
12"13.200" 13.00 6 8 13.20
14"15.30" 13.00 7 10 15.30
18"19.500" 13.00 7 12 19.50
16"17.400" 13.00 7 12 17.40
24"25.800" 18.00 7 14
20"21.600" 16.00 7 14
Dimensions and weights are approximate and subject to change31
02/13
3" 5/8" X 5" 4 C69750694" 3/4" X 4 -1/2" 4 C69750266" 3/4" X 5" 6 C69750278" 3/4" X 5" 6 C697502810" 3/4" X 6" 8 C697502912" 3/4" X 6" 8 C697503014" 3/4" X 7" 10 IMJAPHD14 16" 3/4" X 7" 12 IMJAPHD1618" 3/4" X 7" 12 IMJAPHD18 20" 3/4" X 7" 14 IMJAPHD20 24" 3/4" X 7" 16 IMJAPHD24
IPS/DIPS MJ ACCESSORY KIT INCLUDES GLAND
Bolt Numberof Bolts
Size LIST PRICE
Part Number
32
02/13
Nominal Size
Pressureclass (psi) STYLE Dimensions
A x T x D (in)Weight perItem (lbs)
List Price Machined Part #
160 PEI11HBWAWSKF200 PEI9HBWAWSKF160 PEI11HBWAWSMF200 PEI9HBWAWSMF160 PEI11HBWAWSPF200 PEI9HBWAWSPF160 8 PEI11HBWAWSUF200 12 PEI9HBWAWSUF160 12 PEI11HBWAWSXF200 22 PEI9HBWAWSXF160 20 PEI11HBWAWS10F200 34 PEI9HBWAWS10F160 36 PEI11HBWAWS12F200 52 PEI9HBWAWS12F160 56 PEI11HBWAWS14F200 80 PEI9HBWAWS14F160 74 PEI11HBWAWS16F200 106 PEI9HBWAWS16F160 1 88 PEI11HBWAWS18F200 2 110 PEI9HBWAWS18F160 1 112 PEI11HBWAWS20F200 2 140 PEI9HBWAWS20F160 1 136 PEI11HBWAWS22F200 2 170 PEI9HBWAWS22F160 1 168 PEI11HBWAWS24F200 2 204 PEI9HBWAWS24F160 PEI11HBWAWS26F200 PEI9HBWAWS26F160 PEI11HBWAWS28F200 PEI9HBWAWS28F160 PEI11HBWAWS30F200 PEI9HBWAWS30F100 PEI17HBWAWS32F160 PEI11HBWAWS32F100 PEI17HBWAWS34F160 PEI11HBWAWS34F100 PEI17HBWAWS36F160 PEI11HBWAWS36F80 PEI21HBWAWS42F
100 PEI17HBWAWS42F80 PEI21HBWAWS48F
100 PEI17HBWAWS48F80 PEI21HBWAWS54F
100 PEI17HBWAWS54F
IPS FAB WALL ANCHOR/WATER STOP
2" 1 5 1/2 x 5/8 x 3 1/2
4" 1 5 1/2 x 1 1/4 x 6 1/4 4
1
3" 1 5 1/2 x 5/16 x 4 1/2 2
6" 1 7 x 1 15/16 x 8 3/8
8" 1 7 x 2 1/2 x 10 1/2
10" 1 7 x 2 1/2 x 12 3/4
12" 1 7 x 2 1/2 x 15 1/4
14" 1 10 x 2 1/2 x 17 1/4
16" 1 10 x 3 3/8 x 19 3/4
22" 10 x 3 3/8 x 25 1/2
24" 10 x 3 3/8 x 27 3/4
18" 10 x 3 3/8 x 20 1/2
20" 10 x 3 3/8 x 23 3/8
28" 2 11 1/2 x 3 1/2 x 32 1/4 304
26" 2 11 1/2 x 3 1/2 x 30 242
32" 2 11 1/2 x 3 1/2 x 36 1/2 377
30" 2 11 1/2 x 3 1/2 x 34 1/4 368
36" 2 11 1/2 x 4 x 40 3/4 523
34" 2 11 1/2 x 4 x 38 1/2 442
42" 2 18 x 4 x 47 1/2 505
48" 2 18 x 4 x 53 7/8
54" 2 18 x 4 x 60 955
672
Dimensions and weights are approximate and subject to change33
02/13
160 PED11HBWAWSPF200 2 PED9HBWAWSPF
160 PED11HBWAWSUF200 2 12 PED9HBWAWSUF
160 PED11HBWAWSXF200 2 22 PED9HBWAWSXF
160 PED11HBWAWS10F200 2 32 PED9HBWAWS10F
160 PED11HBWAWS12F200 2 52 PED9HBWAWS12F
160 PED11HBWAWS14F200 2 68 PED9HBWAWS14F
160 PED11HBWAWS16F200 2 90 PED9HBWAWS16F
160 PED11HBWAWS18F200 2 110 PED9HBWAWS18F
160 PED11HBWAWS20F200 2 132 PED9HBWAWS20F
160 PED11HBWAWS24F200 2 200 PED9HBWAWS24F
24"25.80"
1 10 x 3 3/8 x 31 160
20"21.60"
1 10 x 3 3/8 25 13/16 106
18"19.50"
1 10 x 3 3/8 x 21 5/8 88
16"17.40"
1 10 x 23 3/8 x 19 1/2 72
14"15.30"
1 10 x 2 1/2 x 17 3/8 54
12"13.20"
1 7 x 2 1/2 x 15 5/16 36
10"11.10"
1 7 x 2 1/2 x 13 3 /16 20
8"9.05"
1 7 x 2 1/2 x 10 7/8 12
6"6.90"
1 7 x 1 15/16 x 8 3/8 8
List Price Part #
4"4.80"
1 7 x 1 1/4 x 6 1/4 4
DIPS FAB WALL ANCHOR/WATER STOP
Nominal SizeActual OD
Pressure class (psi)
Style DimensionA x T x D (in)
Weight perItem (lbs)
Dimensions and weights are approximate and subject to change34
02/13
160 3 PEIPED11HBTPF
200 4 PEIPED9HBTPF
160 6 PEIPED11HBTUF
200 7 PEIPED9HBTUF
160 10 PEIPED11HBTXF
200 12 PEIPED9HBTXF
160 14 PEIPED11HBT10F
200 17 PEIPED9HBT10F
160 20 PEIPED11HBT12F
200 24 PEIPED9HBT12F
160 35 PEIPED11HBT14F
200 41 PEIPED9HBT14F
160 45 PEIPED11HBT16F
200 53 PEIPED9HBT16F
160 56 PEIPED11HBT18F
200 67 PEIPED9HBT18F
160 69 PEIPED11HBT20F
200 82 PEIPED9HBT20F
160 98 PEIPED11HBT24F
200 117 PEIPED9HBT24F24" x 24"
25.8" x 24.0'15
18" x 18"19.5" x 18.0"
15
20" x 20"21.6" x 20.0"
15
16" x 16"17.4" x 16.0"
15
10" x10"11.1" x 10.8"
13
12" x 12"13.2" x 12.8"
15
Part #
4" x 4"4.8" x 4.5"
10
14" x 14"15.3" x 14.0"
15
6" x 6"6.9" x 6.6"
11 3/4
8" x 8"9.1" x 8.6"
13
List Price
IPS / DIPS FAB TRANSITIONNominal Size
Actual ODPressure
Class (psi)Dimension
L (in)Weight per Item (lbs)
Dimensions and weights are approximate and subject to change
35
02/13
Nominal Size DR/Wall DimensionL (in)
Package Weight (lbs) CSA IAPMO List
Price Part #
1/2" CTS 0.09 1.65 0.2 X3/4 CTS 0.09 2.14 0.2
0.1021.125
1/2" IPS DR 9.3 2.07 0.23/4" IPS DR 11 2.04 0.3 X PEI11ABCAF
DR 9DR 11 X X PEI11ABCAGDR 9DR 10 XDR11 X PEI11ABCAH
1 1/2 " IPS DR 11 2.58 1.3 X PEI11ABCAJDR 7 3.2DR 9 X PEI9ABCAKDR 11 X PEI11ABCAKDR17DR 7 7.43 10 PEI7ABCAMDR 9 8.1DR 11/ 11.5 X X PEI11ABCAMDR 13.5 XDR 17 PEI17ABCAMDR 7 PEI7ABCAPDR 9 PEI9ABCAPDR 11/11.5 X X PEI11ABCAPDR 13.5 XDR 17 PEI17ABCAPDR 7 PEI7ABCAUDR 9DR 11/11.5 PEI11ABCAUDR 13.5DR 17 PEI17ABCAUDR 7 DR 9 PEI9ABCAXDR 11 X PEI11ABCAXDR 13.5 XDR 17 PEI17ABCAX
8" IPS 12.41
5.6
4.3
4" IPS
23.7
97.75
6" IPS
27.9
14.110.25
3" IPS5.6
2" IPS 7.00 2.6
IPS MOLDED END CAP
1" CTS 2.18 0.3
3.25
1" IPS 2.09 0.5
1 1/4" IPS 1.2
Dimensions and weights are approximate and subject to change36
02/13
Nominal Size Dimensions Weight per
Actual ODL (in) Item (lbs.)
10”10 ”
200 DR 9 N 12PEI9HBCA10F
Fabricated IPS End Caps
PART#W/O PUPList PriceWith 12” Pup
Pressure Class (psi)
SDR StandardItem List Price
Without Pup
10.75” PEI9HBCA10F
12”12.75
200 DR 9 N 16PEI9HBCA12F
14”14.00”
200 DR 9 N 23PEI9HBCA14F
160 DR 11 N PEI11HBCA16F
200 DR 9 N PEI9HBCA16F
160 DR 11 N PEI11HBCA18F18” 37
16”16.00”
28
200 DR 9 N PEI9HBCA18F
100 DR 17 N PEI17HBCA20F
160 DR 11 N PEI11HBCA20F
100 DR 17 N PEI17HBCA22F
160 DR 11 N PEI11HBCA22F
100 DR 17 N PEI17HBCA24F
160 DR 11 N PEI11HBCA24F
18.00”37
64
22”22.00”
55
24”24.00”
20”20.00”
45
DIMENSIONS VARY PER SPEC AND PRESSURE RATING
100 12160 13 PEI11HBR10XF100 19160 19100 20160 20 PEI11ABR1210100 26 PEI17HBR1410F160 26 PEI11HBR1410F100 28 PEI17HBR1412F
160 28 PEI11HBR1412F
100 36 PEI17HBR1614F160 36 PEI11HBR1614F100 45 PEI17HBR1814F160 45 PEI11HBR1814F100 47 PEI17HBR1816F160 47 PEI11HBR1816F100 56 PEI17HBR2018F160 56 PEI11HBR2018F100 69160 69 PEI11HBR2220F100 82 PEI17HBR2420F160 82 PEI11HBR2420F100 84
160 84
10 " x 8"10.750" x 8.625"
12" x 8"12.750" x 8.625"
12
12
12" x 10" 12.750" x 10.750"
14" x 12"14.000" x 12.750"
16" x 14"16.000" x 14.00
14
14
18" x 14"18.000" x 14.000
14" x 10"14.00" x 10.750
18
18" x 16"18.000" x 16.000
18
14
14
20" x 18"20.000" x 18"
22" x 20"22.000" x 20.000"
24" x 22"24.000" x 22.000"
24" x 20"24.000" x 20.000"
CALL FOR PRICE ON LARGER SIZES
IPS FAB REDUCER
Nominal Size Pressure Class (psi)
DimensionL (in)
Weight per Item (lbs)
List Price Part #
14
14
14
12
Dimensions and weights are approximate and subject to change38
02/13
Dimensions
N 100 N PEI17HBERMKF160 N PEI11HBERMKF
N100 N PEI17HBERPMF160 N PEI11HBERPMF
N100 N PEI17HBERUMF160 N PEI11HBERUMF
N100 N PEI17HBERUPF160 N PEI11HBERUPF
N100 N PEI17HBERXPF160 N PEI11HBERXPF
N100 N PEI17HBERXUF160 N PEI11HBERXUF
N100 N PEI17HBER10UF160 N PEI11HBER10UF
N100 N PEI17HBER10XF160 N PEI11HBER10XF
N100 N PEI17HBER12XF160 N PEI11HBER12XF
N100 N PEI17HBER1210F160 N PEI11HBER1210F100 N PEI17HBER1410F160 N PEI11HBER1410F
N100 N PEI17HBER1412F160 N PEI11HBER1412F
LIST PRICEL (in)Actual OD Item (lbs.)
Nominal Size Pressure Class (psi)
Std. Item
Weight per
3” X 2”3.50” X 2.38”
13.00 2
4” X 3”4.50” X 3.50”
14.00 3
6” X 3”6.63” X 3.50”
14.50 6
6” X 4”6.63” X 4.50”
15.50 6
8” X 4”8.63” X 4.50”
16.00 10
8” X 6”8.63” X 6.63”
16.50 11
1 0” X 6”10.75” X 6.63”
17.50 18
1 0” X 8”10.75” X 8.63”
18.00 18
12” X 8”12.75” X 8.63”
19.50 28
12” X 10”12.75” X 10.75”
19.50 28
14” X 10”14.00” X 10.75”
21.00 36
14” X 1 2”14.00” X 12.75”
22.50 36
PART #
IPS FAB ECCENTRIC REDUCER
DIMENSIONS AND WEIGHTS ARE APPROXIMATE AND ARE SUBJECT TO CHANGE39
02/13
IPS FAB ECCENTRIC REDUCER
N100 N PEI17HBER1612F160 N PEI11HBER1612F
N100 N PEI17HBER1614F160 N PEI11HBER1614F
N100 N PEI17HBER1814F160 N PEI11HBER1814F
N100 N PEI17HBER1816F160 N PEI11HBER1816F
N100 N PEI17HBER2016F160 N PEI11HBER2016F
N100 N PEI17HBER2018F160 N PEI11HBER2018F
N100 N PEI17HBER2420F160 N PEI11HBER2420F
N100 N PEI17HBER2422F160 N PEI11HBER2422F
50 N 100 N PEI17HBER2624F160 N PEI11HBER2624F
50 N 100 N PEI17HBER2824F160 N PEI11HBER2824F
50 N 100 N PEI17HBER2826F160 N PEI11HBER2826F
50 N 100 N PEI17HBER3026G160 N PEI11HBER3026F
46
24” X 22”24.00” X 22.00”
22.50 134
20” X 16”20.00” X 16.00”
22.50 75
20” X 18”20.00” X 18.00”
22.50 75
24” X 20”24.00” X 20.00”
22.50 134
18” X 14”18.00” X 14.00”
22.50 61
18” X 16”18.00” X 16.00”
22.50 61
16” X 12”16.00” X 12.75”
22.50 46
16” X 14”16.00” X 14.00”
22.50
26” X 24”26.00” X 24.00”
39.90 230
28” X 24”28.00” X 24.00”
39.20 265
28” X 26”28.00” X 26.00”
54.20 265
30” X 26”30.00” X 26.00”
53.60 306
DIMENSIONS AND WEIGHTS ARE APPROXIMATE AND ARE SUBJECT TO CHANGE40
02/13
16014
33 PED11HBR1412F
16014
33 PED11HBR1614F
16014
53 PED11HBR1816F
16025
74 PED11HBR2018F
16025
125 PED11HBR2420F
DIPS FAB CONCENTRIC REDUCER
Nominal SizeActual OD
Pressure Class (psi)
DimensionL (in)
Weight per Item (lbs)
List Price Part #
16''x 14"17.40" x 15.30"
14''x 12"15.30" x 13.20"
PED11HBRUPF
PED11HBRXUF
6" x 4"6.900" x 4.800'
160 6 7
8" x 6"9.050" x 6.900"
160 10 11
18" x 16"19.50" x 17.40"
24" x 20"25.88" x 21.60"
20" x 18"21.00" x 19.50"
12 16 PED11HBR10XF
12"x 10"13.200" x 11.10"
160 12 23 PED11HBR1210F
10" x 8"11." x 9.050"
160
Dimensions and weights are approximate and subject to change41
02/13
Nominal Size DR DimensionsA x B x L (in)
Package Weight (lbs)
List Price Part #
1" x1/2" IPS DR 11 x 9.3 1.50 X 1.25 X 4.0 0.7 PEI11HBRGD1" IPS x 3/4" IPS DR 11 x11 1.50 1.75 X 4.50 0.8 PEI11ABRGF
DR 10 x 11DR 11 x 11 PEI11ABRHGDR 9 X 9 DR 11 x 11 PEI11ABRJFDR 9 X 9 DR 11 x 11 PEI11ABRJG
2" x 1" IPS DR 11 x 11 2.49 X 2.88 X 6.31 3 PEI11ABRKGDR 9 x 9DR 11 x 10DR 11x 11 PEI11ABRKHDR 9 x 9 PEI9ABRKJDR 11x 11 PEI11ABRKJDR 7 x 7 PEI7ABRMKDR 9 x 9 PEI9ABRMKDR 11 x 11 PEI11ABRMKDR 13.5 x 13.5DR 17 x 17 PEI17ABRMKDR 7 x 7 16.3 PEI7ABRPKDR 9 x 9 15.3 PEI9ABRPKDR 11 x 11 PEI11ABRPKDR 13.5 x 13.5DR 17 x 17 PEI17ABRPKDR 7 x 7 PEI7ABRPMDR 9 x 9 PEI9ABRPMDR 11 x 11 PEI11ABRPMDR 13.5 x 13.5DR 17 x 17 PEI17ABRPMDR 7 x 7 24.6 PEI7ABRUPDR 9 x 9 23 PEI9ABRUPDR 11 x 11 27.1 PEI11ABRUPDR 13.5 x 13.5 26.2DR 17 x 17 24.8 PEI17ABRUPDR 7 x 7 PEI7ARXUDR 9 x 9 PEI9ABRXUDR 11 x 11 PEI11ABRXUDR 13.5 x 13.5DR 17 x 17 PEI17ABRXU
IPS MOLDED REDUCER
1 1/4 " IPS x 1" IPS 1.21.86 X 1.92 X 4.25
1 1/2"IPS x 3/4" IPS 2.3
1 1/2"IPS x 1" IPS 2.52.50 X 2.28 X5.75
2.50 X 2.40 X 5.69
3.22 X 2.50 X 6.553"IPS x 2" IPS
9.7
$8.50
2.50 X 2.72 X 6.00
2" x 1 1/4" IPS 3.5
2" x 1 1/2" IPS 3
3.15 X 2.56 X 6.44
4" IPSx 3"IPS
17.3
14.63.13 x 3.13 x 8.62
4" IPSx 2" IPS11.6
3.00 X 3.00 X 11.87
9.9
7.5
6" IPS x 4"IPS
8" IPS x 6" IPS 5.00 x 4.64 x 10.70
4.22 x 3.75 x 9.13
Dimensions and weights are approximate and subject to change42
02/13
80 DR 17 1 PEI17HB225KF2128 DR 11 1 PEI11HB225KF2160 DR 9 1 PEI9HB225KF2200 DR 7 1 PEI7HB225KF280 DR 17 1 PEI17HB225MF2
128 DR 11 1 PEI11HB225MF2160 DR 9 1 PEI9HB225MF2200 DR 7 2 PEI7HB225MF280 DR 17 2 PEI17HB225PF2
128 DR 11 2 PEI11HB225PF2160 DR 9 3 PEI9HB225PF2200 DR 7 3 PEI7HB225PF280 DR 17 6 PEI17HB225UF2
128 DR 11 6 PEI11HB225UF2160 DR 9 7 PEI9HB225UF2200 DR 7 8 PEI7HB225UF280 DR 17 10 PEI17HB225XF2
128 DR 11 10 PEI11HB225XF2160 DR 9 12 PEI9HB225XF2200 DR 7 15 PEI7HB225XF280 DR 17 11 PEI17HB22510F2
128 DR 11 17 PEI11HB22510F2160 DR 9 20 PEI9HB22510F2200 DR 7 24 PEI7HB22510F280 DR 17 19 PEI17HB22512F2
128 DR 11 28 PEI11HB22512F2160 DR 9 34 PEI9HB22512F2200 DR 7 42 PEI7HB22512F280 DR 17 23 PEI17HB22514F2
128 DR 11 35 PEI11HB22514F2160 DR 9 41 PEI9HB22514F2200 DR 7 51 PEI7HB22514F280 DR 17 31 PEI17HB22516F2
128 DR 11 46 PEI11HB22516F2160 DR 9 55 PEI9HB22516F2200 DR 7 66 PEI7HB22516F280 DR 17 41 PEI17HB22518F2
128 DR 11 60 PEI11HB22518F2160 DR 9 71 PEI9HB22518F2200 DR 7 85 PEI7HB22518F2
16"16.000" 24 x 8 x 9 5/8
18"18.000" 27 x 8 x 9 3/4
10"10.750"
17 1/4 x 6 1/2 x 7
5/8
12"12.750" 19 1/2 x 8 x 9 1/4
14"14.000"
21 x 8 x 9 3/8
4"4.5000" 14 1/4 x 5 x 5 1/2
6"6.625" 15 1/4 x 6 x 16 5/8
8"8.625"
16 1/4 x 6 1/2 x 7
3/8
List PriceUn-Machined Part #
2"2.3750" 13 1/8 x 4 x 4 1/4
3"3.50" 13 5/8 x 4 x 4 3/8
Weight per Item (lbs)
IPS FAB 2 SEG. 22.5 ELBOW
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionR x C x B (in)
Dimensions and weights are approximate and subject to change43
02/13
List PriceUn-Machined Part #Weight per
Item (lbs)
IPS FAB 2 SEG. 22.5 ELBOW
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionR x C x B (in)
80 DR 17 51 PEI17HB22520F2128 DR 11 75 PEI11HB22520F2160 DR 9 90 PEI9HB22520F2200 DR 7 108 PEI7HB22520F280 DR 17 63 PEI17HB22522F2
128 DR 11 93 PEI11HB22522F2160 DR 9 111 PEI9HB22522F2200 DR 7 133 PEI7HB22522F280 DR 17 76 PEI17HB22524F2
128 DR 11 113 PEI11HB22524F2160 DR 9 135 PEI9HB22524F2200 DR 7 161 PEI7HB22524F280 DR 17 142 PEI17HB22526F2
128 DR 11 220 PEI11HB22526F2160 DR 9 253 PEI9HB22526F280 DR 17 167 PEI17HB22528F2
128 DR 11 249 PEI11HB22528F2160 DR 9 297 PEI9HB22528F280 DR 17 194 PEI17HB22530F2
128 DR 11 289 PEI11HB22530F2160 DR9 345 PEI9HB22530F280 DR 17 223 PEI17HB22532F2
128 DR 11 333 PEI11HB22532F280 DR 17 255 PEI17HB22534F2
128 DR 11 380 PEI11HB22534F280 DR 17 286 PEI17HB22536F2
128 DR 11 426 PEI11HB22536F265 DR 21 462 PEI21HB22542F280 DR 17 563 PEI17HB22542F265 DR 21 617 PEI21HB22548F280 DR 17 753 PEI17HB22548F250 DR 26 652 PEI26HB22554F265 DR 21 799 PEI21HB22554F2
34"34.000" 51 x 14 x 17 3/8
36"36.000"
54 x 14 x 17 5/8
54"54.000"
81 x 21 x 26 3/8
42"42.000" 63 x 21 x 25 1/8
48"48.000" 72 x 21 x 25 3/4
28"28.000" 42 x 14 x 16 3/4
30"30.000"
45 x 14 x 17
32"32.000" 48 Xx14 x 17 1/8
22"22.000" 33 x 8 x 10 1/4
24"24.000" 36 x 8 x 10 3/8
26"26.000" 39 x 14 x 16 5/8
20"20.000" 30 x 8 x 10
Dimensions and weights are approximate and subject to change44
02/13
128 DR 11 1 PEI11HB3KF2160 DR 9 1 PEI9HB3KF2200 DR 7 1 PEI7HB3KF2128 DR 11 1 PEI11HB3MF2160 DR 9 2 PEI9HB3MF2200 DR 7 2 PEI7HB3MF2128 DR 11 2 PEI11HB3PF2160 DR 9 3 PEI9HB3PF2200 DR 7 3 PEI7HB3PF2128 DR 11 6 PEI11HB3UF2160 DR 9 7 PEI9HB3UF2200 DR 7 8 PEI7HB3UF2128 DR 11 11 PEI11HB3XF2160 DR 9 13 PEI9HB3XF2200 DR 7 15 PEI7HB3XF280 DR 17 12 PEI17HB310F2
128 DR 11 18 PEI11HB310F2160 DR 9 22 PEI9HB310F2200 DR 7 26 PEI7HB310F280 DR 17 21 PEI17HB312F2
128 DR 11 32 PEI11HB312F2160 DR 9 38 PEI9HB312F2200 DR 7 45 PEI7HB312F280 DR 17 27 PEI17HB314F2
128 DR 11 40 PEI11HB314F2160 DR 9 48 PEI9HB314F2200 DR 7 58 PEI7HB314F280 DR 17 37 PEI17HB316F2
128 DR 11 55 PEI11HB316F2160 DR 9 66 PEI9HB316F2200 DR 7 79 PEI7HB316F280 DR 17 47 PEI17HB318F2
128 DR 11 70 PEI11HB318F2160 DR 9 83 PEI9HB318F2200 DR 7 100 PEI7HB318F280 DR 17 60 PEI17HB320F2
128 DR 11 90 PEI11HB320F2160 DR 9 108 PEI9HB320F2200 DR 7 129 PEI7HB320F2
18"18.000"
27 X 8 X 10 1/2
20"20.000"
30 X 8 X 10 3/4
12"12.750"
19 1/8 X 8 X 9 3/4
14"14.000"
21 X8 X 9 7/8
16"16.000"
24 X 8 X 10 1/8
6" 6.625"
12 5/8 x 6 x 6 7/8
8" 8.625"
13 5/8 x 6 1/2 x 7 5/8
10"10.750"
16 1/2 X 6 1/2 X 8
2" 2.375"
6 7/8 x 4 x 4 3/8
3" 3.500"
7 3/8 x 4 x 4 1/2
4" 4.500"
7 7/8 x 5 x 5 5/8
IPS FAB 2 SEG. 30 ELBOW
Weight per Item (lbs)
List PriceUn-Machined Part #Nominal Size
Actual ODPressure
Class (psi)FeedStock
DimensionR x C x B (in)
Dimensions and weights are approximate and subject to change45
02/13
IPS FAB 2 SEG. 30 ELBOW
Weight per Item (lbs)
List PriceUn-Machined Part #Nominal Size
Actual ODPressure
Class (psi)FeedStock
DimensionR x C x B (in)
80 DR 17 76 PEI17HB322F2128 DR 11 114 PEI11HB322F2160 DR 9 136 PEI9HB322F2128 DR 7 162 PEI7HB322F280 DR 17 94 PEI17HB324F2
128 DR 11 141 PEI11HB324F2160 DR 9 168 PEI9HB324F2200 DR 7 201 PEI7HB324F280 DR 17 198 PEI17HB328F2
128 DR 11 295 PEI11HB328F2160 DR 9 353 PEI9HB328F280 DR 17 228 PEI17HB330F2
128 DR 11 339 PEI11HB330F2160 DR 9 405 PEI9HB330F280 DR 17 266 PEI17HB332F2
128 DR 11 396 PEI11HB332F280 DR 17 307 PEI17HB334F2
128 DR 11 458 PEI11HB334F280 DR 17 353 PEI17HB336F2
128 DR 11 525 PEI11HB336F265 DR 21 513 PEI21HB342F280 DR 17 659 PEI17HB342F265 DR 21 742 PEI21HB348F280 DR 17 900 PEI17HB348F2
50 DR 26 775 PEI26HB354F265 DR 21 969 PEI21HB354F2
54"54.000"
81 X 21 X 28 1/2
42"42.000"
63 X 21 X 26 5/8
48"48.000"
72 X 21 X 27 1/2
32"32.000"
48 X 14 X 18 1/4
34"34.000"
51 X 14 X 18 1/2
36"36 000"
54 X 14 X 18 7/8
24"24.000"
36 X 8 X 11 1/4
28"28.000"
42 X 14 X 17 3/4
30"
45 X 14 X 18
22"22.000"
33 X 8 X 11
Dimensions and weights are approximate and subject to change46
02/13
80 DR 17 12 PEI17HB410F2128 DR 11 18 PEI11HB410F2160 DR 9 22 PEI9HB410F2200 DR 7 26 PEI7HB410F280 DR 17 21 PEI17HB412F2
128 DR 11 32 PEI11HB412F2160 DR 9 38 PEI9HB412F2200 DR 7 45 PEI7HB412F280 DR 17 27 PEI17HB414F214"
List PriceUn-Machined Part #
10"10.750"
12 5/8 x 6 1/2 x 8 3/4
12"12.750" 13 5/8 x 8 x 10 5/8
Weight per Item (lbs)
IPS FAB 2 SEG. 45 ELBOW
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionR x C x B (in)
128 DR 11 40 PEI11HB414F2160 DR 9 48 PEI9HB414F2200 DR 7 58 PEI7HB414F280 DR 17 37 PEI17HB416F2
128 DR 11 55 PEI11HB416F2160 DR 9 66 PEI9HB416F2200 DR 7 79 PEI7HB416F280 DR 17 47 PEI17HB418F2
128 DR 11 70 PEI11HB418F2160 DR 9 83 PEI9HB418F2200 DR 7 100 PEI7HB418F280 DR 17 60 PEI17HB420F2
128 DR 11 90 PEI11HB420F2160 DR 9 108 PEI9HB420F2200 DR 7 129 PEI7HB420F280 DR 17 76 PEI17HB422F2
128 DR 11 114 PEI11HB422F2160 DR 9 136 PEI9HB422F2200 DR 7 162 PEI7HB422F2
20"20.000"
17 1/4 x 8 x 12 1/8
22"22.000"
23 1/16 x 8 x 12 9/16
14.000" 14 1/4 x 8 x 10 7/8
16"16.000"
15 1/4 x 8 x 11 5 /16
18"18.000"
16 1/4 x 8 x 11 3/4
Dimensions and weights are approximate and subject to change
List PriceUn-Machined Part #Weight per
Item (lbs)
IPS FAB 2 SEG. 45 ELBOW
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionR x C x B (in)
80 DR 17 94 PEI17HB424F2128 DR 11 141 PEI11HB424F2160 DR 9 168 PEI9HB424F2200 DR 7 201 PEI7HB424F280 DR 17 198 PEI17HB428F2
128 DR 11 295 PEI11HB428F2160 DR 9 353 PEI9HB428F280 DR 17 228 PEI17HB430F2
128 DR 11 339 PEI11HB430F2
28"28.000"
38 3/16 x 14 x 19
13/16
30"30 000"
38 5/16 x 14 x 20
24"24.000"
24 1/16 x 8 x 13
160 DR 9 405 PEI9HB430F2
80 DR 17 266 PEI17HB432F2
128 DR 11 396PEI11HB432F2
80 DR 17 307 PEI17HB434F2
128 DR 11 458 PEI11HB434F280 DR 17 353 PEI17HB436F2
128 DR 11 525 PEI11HB436F265 DR 21 513 PEI21HB442F2
80 DR 17
659 PEI17HB442F265 DR 21 742 PEI21HB448F2
80 DR 17 905 PEI17HB448F250 DR 26 775 PEI26HB454F2
65 DR 21 969 PEI21HB454F2
34"34.000"
38 7/16 x 14 x 21
1/16
36"36.000"
38 1/2 x 14 x 21 7/16
54"54.000" 50 3/4 x 21 x 32 3/16
42"42.000"
50 5/16 x 21 x 29
11/16
48"48.000"
50 9/16 x 21 x 30 15/16
30.000
3/16
32"32.000"
38 3/8 x 14 x 20 5/8
Dimensions and weights are approximate and subject to change
IPS FAB 3 SEG. 45 ELBOW
Part #List PriceUn-Machined
128 DR 11 1 PEI11HB4KF3160 DR 9 1 PEI9HB4KF3200 DR 7 1 PEI7H4BKF3128 DR 11 2 PEI11HB4MF3160 DR 9 2 PEI9HB4MF3200 DR 7 3 PEI7HB4MF3128 DR 11 3 PEI11HB4PF3160 DR 9 4 PEI9HB4PF3200 DR 7 5 PEI7HB4PF3128 DR 11 8 PEI11HB4UF3160 DR 9 10 PEI9HB4UF3200 DR 7 12 PEI7HB4UF3128 DR 11 15 PEI11HB4XF3160 DR 9 18 PEI9HB4XF3200 DR 7 22 PEI7HB4XF380 DR 17 16 PEI17HB410F3128 DR 11 24 PEI11HB410F3160 DR 9 29 PEI9HB410F3200 DR 7 35 PEI7HB410F380 DR 17 27 PEI17HB412F3128 DR 11 40 PEI11HB412F3160 DR 9 48 PEI9HB412F3200 DR 7 60 PEI7HB412F380 DR 17 34 PEI17HB414F3
128 DR 11 50 PEI11HB414F3160 DR 9 60 PEI9HB414F3200 DR 7 74 PEI7HB414F380 DR 17 46 PEI17HB416F128 DR 11 70 PEI11HB416F3160 DR 9 83 PEI9HB416F3200 DR 7 99 PEI7HB416F3
16"16.000"
24 x 8 x 14 3/4
10"10.750"
17 1/4 x 6 1/2 x 11 1/4
12"12.750"
19 1/2 x 8 x 13 1/2
14"14.000" 21 x 8 x 13 7/8
4"4.500"
14 1/4 x 5 x 8 1/2
6"6.625"
15 1/4 x 6 x 10
8"8.625"
16 1/4 x 6 1/2 x 10 7/8
Weight per Item (lbs)
2"2.375"
13 1/8 x 4 x 7
3"3.500"
13 5/8 x 4 x 7 1/4
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionR x C x B (in)
Dimensions and weights are approximate and subject to change
49
02/13
IPS FAB 3 SEG. 45 ELBOW
Part #List PriceUn-Machined
Weight per Item (lbs)
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionR x C x B (in)
80 DR 17 62 PEI17HB418F3128 DR 11 92 PEI11HB418F3160 DR 9 111 PEI9HB418F3200 DR 7 132 PEI7HB418F380 DR 17 80 PEI17HB420F3128 DR 11 121 PEI11HB420F3160 DR 9 144 PEI9HB420F3200 DR 7 171 PEI7HB420F380 DR 17 104 PEI17HB422F3128 DR 11 153 PEI11HB422F3160 DR 9 183 PEI9HB422F3200 DR 7 219 PEI7HB422F380 DR 17 129 PEI17HB424F3128 DR 11 191 PEI11HB424F3160 DR 9 228 PEI9HB424F3200 DR 7 272 PEI7HB424F380 DR 17 209 PEI17HB426F3128 DR 11 323 PEI11HB426F3160 DR 9 371 PEI9HB426F3200 DR 7 443 PEI7HB426F380 DR 17 250 PEI17HB428F3128 DR 11 372 PEI11HB428F3160 DR 9 444 PEI9HB428F380 DR 17 296 PEI17HB430F3
128 DR 11 441 PEI11HB430F3
160 DR9 526 PEI9HB430F380 DR 17 347 PEI17HB432F3
128 DR 11516 PEI11HB432F3
28"28.000"
42 x 14 x 25 7/8
30"30.000"
45 x 14 x 26 5/8
32"32.000"
48 x 14 x 27 1/2
22"22.000"
33 x 8 x 17 1/4
24"24.000"
36 x 8 x 18 1/8
26"26.000"
39 x 14 x 25
18"18.000"
27 x 8 x 15 5/8
20"20.000"
30 x 8 x 16 1/2
Dimensions and weights are approximate and subject to change
50
02/13
IPS FAB 3 SEG. 45 ELBOW
Part #List PriceUn-Machined
Weight per Item (lbs)
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionR x C x B (in)
80 DR 17 404 PEI17HB434F3
128 DR 11 601 PEI11HB434F380 DR 17 466 PEI17HB436F3
128 DR 11 693 PEI11HB436F365 DR 21 691 PEI21HB442F380 DR 17 844 PEI17HB442F365 DR 21 960 PEI21HB448F380 DR 17 1171 PEI17HB448F3
50 DR 26 1051 PEI26HB454F3
65 DR 21 1287 PEI21HB454F3
48"48.000"
72 x 21 x 41 1/4
54" 54.000"
81 x 21 x 43 3/4
34"34.000"
51 x 14 x 28 3/8
36"36.000"
54 x 14 x 29 1/4
42"42.000"
63 x 21 x 38 3/4
Dimensions and weights are approximate and subject to change
51
02/13
Nominal Size Pressure Dimensions Weight per List Price Part #
Actual OD Class (psi) R x C x B (in) Item (lbs.) Un-machined
80 DR 17 14 PEI17HB9XF3128 DR 11 20 PEI11HB9XF3160 DR 9 23 PEI9HB9XF3200 DR 7 29 PEI7HB9XF3
80 DR 17 21 PEI17HB910F3128 DR 11 31 PEI11HB910F3160 DR 9 37 PED9HB910F3200 DR 7 43 PEI7HB910F3
80 DR 17 34 PEI17HB912F3128 DR 11 51 PEI11HB912F3160 DR 9 61 PEI9HB912F3200 DR 7 72 PEI7HB912F3
80 DR 17 42 PEI17HB914F3128 DR 11 62 PEI11HB914F3160 DR 9 75 PEI9HB914F3200 DR 7 89 PEI7HB914F3
80 DR 17 56 PEI17HB916F3128 DR 11 84 PEI11HB916F3160 DR 9 100 PEI9HB916F3200 DR 7 120 PEI7HB916F3
80 DR 17 76 PEI17HB918F3128 DR 11 113 PEI11HB918F3160 DR 9 135 PEI9HB918F3200 DR 7 161 PEI7HB918F3
80 DR 17 98 PEI17HB920F3128 DR 11 147 PEI11HB920F3160 DR 9 175 PEI9HB920F3200 DR 7 209 PEI7HB920F3
80 DR 17 134 PEI17HB922F3128 DR 11 201 PEI11HB922F3160 DR 9 239 PEI9HB922F3200 DR 7 286 PEI7HB922F3
80 DR 17 167 PEI17HB924F3128 DR 11 250 PEI11HB924F3160 DR 9 298 PED9HB924F3200 DR 7 356 PEI7HB924F3
24”24.000”
24 1/16 x 8 x 27 1/16
18”18.000” 16 1/4 x 8 x 21 1/4
20”20.000” 17 1/4 x 8 x 22 1/4
22”22.000” 23 1/16 x 8 x 26 1/16
12”12.750” 13 5/8 x 8 x 18 5/8
14”14.000” 14 1/4 x 8 x 19 1/4
16”16.000” 15 1/4 x 8 x 20 1/4
Feed Stock
FAB IPS 3 SEG 90
10”10.750”
12 5/8 x 6 1/2 x 16 1/8
8”8.625”
10 3/4 X 6 1/2 X 14 5/8
Dimensions and weights are approximate and subject to change52
02/13
Nominal Size Pressure Dimensions Weight per List Price Part #
Actual OD Class (psi) R x C x B (in) Item (lbs.) Un-machined
Feed Stock
FAB IPS 3 SEG 90
80 DR 17 352 PEI17HB928F3128 DR 11 525 PEI11HB928F3160 DR 9 626 PEI9HB928F3
80 DR 17 410 PEI17HB930F3128 DR 11 611 PEI11HB930F3160 DR 9 729 PEI9HB930F3
80 DR 17 473 PEI17HB932F3
128 DR 11 705 PEI11HB932F380 DR 17 542 PEI17HB934F3
128 DR 11 807 PEI11HB934F380 DR 17 616 PEI17HB936F3
128 DR 11 917 PEI11HB936F365 DR 21 925 PEI21HB942F380 DR 17 1,129 PEI17HB942F365 DR 21 1,244 PEI21HB948F380 DR 17 1,518 PEI17HB948F350 DR 26 1,284 PEI26HB954F365 DR 21 1,605 PEI21HB954F3
54”54.000”
50 3/4 x 21 x 61 15/16
42”†42.000”
50 5/16 x 21 x 59 3/16
48”48.000”
50 9/16 x 21 x 60 9/16
32”†32.000”
38 3/8 x 14 x 43 1/8
34”†34.000”
38 7/16 x 14 x 43 9/16
36”†36.000”
38 1/2 x 14 x 44
28”†28.000”
38 3/16 x 14 x 42 3/16
30”†30.000”
38 5/16 x 14 x 42 5/8
Dimensions and weights are approximate and subject to change53
02/13
IPS FAB 5 SEG. 90 ELL
LIST PRICEUN MACHINED
80 DR 17 PEI17HB9KF5
Weight per
Part #Nominal SizeActual OD
Pressure Class
FeedStock
DimensionR x C x B (in)
80 DR 17 PEI17HB9KF5128 DR 11 2 PEI11HB9KF5160 DR 9 2 PEI9HB9KF5200 DR 7 2 PEI7HB9KF580 DR 17 PEI17HB9MF5
128 DR 11 3 PEI11HB9MF5160 DR 9 4 PEI9HB9MF5200 DR 7 4 PEI7HB9MF580 DR 17 PEI17HB9PF5
3"3.500"
13 5/8 x 4 x 15 1/4
2"2.375"
13 1/8 x 4 x 14 3/4
80 DR 17 PEI17HB9PF5128 DR 11 6 PEI11HB9PF5160 DR 9 7 PEI9HB9PF5200 DR 7 8 PEI7HB9PF580 DR 17 PEI17HB9UF5
128 DR 11 13 PEI11HB9UF5160 DR 9 16 PEI9HB9UF5200 DR 7 19 PEI7HB9UF580 DR 17 PEI17HB9XF5
4"4.500"
14 1/4 x 5 x 16 7/8
6"6.625"
15 1/4 x 6 x 18 7/8
80 DR 17 PEI17HB9XF5128 DR 11 24 PEI11HB9XF5160 DR 9 29 PEI9HB9XF5200 DR 7 35 PEI7HB9XF580 DR 17 26 PEI17HB910F5
128 DR 11 39 PEI11HB910F5160 DR 9 47 PEI9HB910F5200 DR 7 58 PEI7HB910F580 DR 17 43 PEI17HB912F5
10"10.750"
17 1/4 x 6 1/2 x 21 3/8
8"8.625"
16 1/4 x 6 1/2 x 20 3/8
80 DR 17 43 PEI17HB912F5128 DR 11 64 PEI11HB912F5160 DR 9 77 PEI9HB912F5200 DR 7 95 PEI7HB912F5
12"12.750"
19 1/2 x 8 x 24 7/8
Dimensions and weights are approximate and subject to change54
02/13
IPS FAB 5 SEG. 90 ELL
80 DR 17 54 PEI17HB914F5128 DR 11 81 PEI11HB914F5160 DR 9 97 PEI9HB914F5200 DR 7 120 PEI7HB914F5
14"14.000" 21 x 8 x 26 1/4
200 DR 7 120 PEI7HB914F580 DR 17 77 PEI17HB916F5
128 DR 11 115 PEI11HB916F5160 DR 9 137 PEI9HB916F5200 DR 7 164 PEI7HB916F580 DR 17 106 PEI17HB918F5
128 DR 11 158 PEI11HB918F5160 DR 9 189 PEI9HB918F5200 DR 7 225 PEI7HB918F5
18"18.000"
27 x 8 x 31 3/8
16"16.000"
24 x 8 x 28 7/8
200 DR 7 225 PEI7HB918F580 DR 17 141 PEI17HB920F5
128 DR 11 210 PEI11HB920F5160 DR 9 251 PEI9HB920F5200 DR 7 300 PEI7HB920F580 DR 17 183 PEI17HB922F5
128 DR 11 273 PEI11HB922F5160 DR 9 325 PEI9HB922F5200 DR 7 389 PEI7HB922F5
20"20.000"
30 x 8 x 34
22"22.000"
33 x 8 x 36 5/8
200 DR 7 389 PEI7HB922F580 DR 17 232 PEI17HB924F5
128 DR 11 346 PEI11HB924F5160 DR 9 413 PEI 9HB924F5200 DR 7 493 PEI7HB924F580 DR 17 376 PEI17HB926F5
128 DR 11 583 PEI11HB926F5160 DR 9 669 PEI9HB926F5200 DR 7 800 PEI7HB926F5
26"26.000"
39 x 14 x 47 7/8
24"24.000"
36 x 8 x 39 1/4
200 DR 7 800 PEI7HB926F580 DR 17 415 PEI17HB928F5
128 DR 11 619 PEI11HB928F5160 DR 9 739 PEI9HB928F580 DR 17 500 PEI17HB930F5
128 DR 11 744 PEI11HB930F5160 DR 9 888 PEI9HB930F580 DR 17 594 PEI17HB932F5
28"28.000"
42 x 14 x 50 3/8
30"30.000"
45 x 14 x 53
32"
Dimensions and weights are approximate and subject to change55
02/13
IPS FAB 5 SEG. 90 ELL
128 DR 11 885PEI11HB932F5
80 DR 17 700 PEI17HB934F534" 51 x 14 x 58 1/4
3232.000"
48 x 14 x 55 5/8
128 DR 11 1043 PEI11HB934F580 DR 17 818 PEI17HB936F5
128 DR 11 1218 PEI11HB936F565 DR 21 1150 PEI21HB942F5
80 DR 17 1403PEI17HB942F5
65 DR 21 1645 PEI21HB948F5
34.000"51 x 14 x 58 1/4
36"36.000"
54 x 14 x 60 7/8
42"42.000"
63 X 21 X 75 5/8
48" 72 x 21 x 83 1/280 DR 17 2007 PEI17HB948F550 DR 26 1847 PEI26HB954F5
65 DR 21 2262PEI21HB954F554"
54.000" 81 x 21 x 91 1/4
48.000"72 x 21 x 83 1/2
Dimensions and weights are approximate and subject to change56
02/13
200 DR 9 3 P29LS90160 DR 11 2.0 P211LS90100 DR 17 2.0 P217LS90200 DR 9 5.0 P39LS90160 DR 11 4.0 P311LS90100 DR 17 3.0 P317LS90200 DR 9 8.0 P49LS90160 DR 11 7.0 P411LS90100 DR 17 6.0 P417LS90200 DR 9 24.0 P69LS90160 DR 11 20.0 P611LS90100 DR 17 14.0 P617LS90200 DR 9 50.0 P89LS90160 DR 11 44.0 P811LS90100 DR 17 19.0 P817LS90200 DR 9 101.0 P109LS90160 DR 11 85.0 P1011LS90100 DR 17 57.0 P1017LS90200 DR 9 165.0 P129LS90160 DR 11 138.0 P1211LS90100 DR 17 93.0 P1217LS90200 DR 9 202.0 P149LS90160 DR 11 169.0 P1411LS90100 DR 17 114.0 P1417LS90
12" 38.3
14" 38.9
8" 24.5
10" 32.25
4" 13.5
6" 19.9
2" 7.13
3" 10.5
Weight Radius List Part #
IPS SWEEP 90
Size (IPS) PressureClass (psi)
Feed
CFP = CALL FOR PRICE
Dimensions and weights are approximate and subject to change
57
02/13
128 DR 11 2 PED11HB225PF2160 DR 9 3 PED9HB225PF2200 DR 7 4 PED7HB225PF2128 DR 11 6 PED11HB225UF2160 DR 9 7 PED9HB225UF2200 DR 7 8 PED7HB225UF2128 DR 11 10 PED11HB225XF2160 DR 9 12 PED9HB225XF2200 DR 7 17 PED7HB225XF280 DR 17 11 PED17HB22510F2
128 DR 11 17 PED11HB22510F2160 DR 9 20 PED9HB22510F2200 DR 7 26 PED7HB22510F280 DR 17 19 PED17HB22512F2
128 DR 11 28 PED11HB22512F2160 DR 9 34 PED9HB22512F2200 DR 7 45 PED7HB22512F280 DR 17 27 PED17HB22514F2
128 DR 11 41 PED11HB22514F2160 DR 9 49 PED9HB22514F2200 DR 7 61 PED7HB22514F280 DR 17 39 PED17HB22516F2
128 DR 11 55 PED11HB22516F2160 DR 9 65 PED9HB22516F2200 DR 7 81 PED7HB22516F280 DR 17 47 PED17HB22518F2
128 DR 11 70 PED11HB22518F2160 DR 9 84 PED9HB22518F2200 DR 7 104 PED7HB22518F280 DR 17 60 PED17HB22520F2
128 DR 11 88 PED11HB22520F2160 DR 9 105 PED9HB22520F2200 DR 7 130 PED7HB22520F280 DR 17 138 PED17HB22524F2
128 DR 11 206 PED11HB22524F2160 DR 9 246 PED9HB22524F2200 DR 7 304 PED7HB22524F2
Part #
4" 4.800"
14 1/4 X 5 X 5 1/2
DIPS FAB 2 SEG. 22.5 ELBOW
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionR x C x B (in)
List PriceUn-Machined
6" 6.900"
15 1/4 X 6 X 6 5/8
8" 9.050"
16 1/4 X 6 1/2 X 7 3/8
Weight per Item (lbs)
14"15.300" 21 X 8 X 9 3/8
16"17.400"
24 X 8 X 9 3/8
10"11.100"
17 1/4 X 6 1/2 X 7 5/8
12"13.200"
19 1/2 X 8 X 9 1/4
24"25.800"
36 X 14 X 16 3/8
18"19.500"
27 X 8 X9 3/4
20"21.600"
30 X 8 X 10
Dimensions and weights are approximate and subject to change
58
02/13
128 DR 11 3 PED11HB4PF2160 DR 9 4 PED9HB4PF2200 DR 7 5 PED7HB4PF2128 DR 11 8 PED11HB4UF2160 DR 9 9 PED9HB4UF2200 DR 7 10 PED7HB4UF2128 DR 11 15 PED11HB4XF2160 DR 9 18 PED9HB4XF2200 DR 7 20 PED7HB4XF280 DR 17 16 PED17HB410F2128 DR 11 24 PED11HB410F2160 DR 9 29 PED9HB410F2200 DR 7 38 PED7HB410F280 DR 17 27 PED17HB412F2128 DR 11 40 PED11HB412F2160 DR 9 48 PED9HB412F2200 DR 7 54 PED7HB412F280 DR 17 34 PED17HB414F2128 DR 11 50 PED11HB414F2160 DR 9 60 PED9HB414F2200 DR 7 75 PED7HB414F280 DR 17 55 PED17HB416F2128 DR 11 82 PED11HB416F2160 DR 9 97 PED9HB416F2200 DR 7 114 PED7HB416F280 DR 17 73 PED17HB418F2128 DR 11 108 PED11HB418F2160 DR 9 129 PED9HB418F2200 DR 7 148 PED7HB418F280 DR 17 101 PED17HB420F2128 DR 11 128 PED11HB420F2160 DR 9 152 PED9HB420F2200 DR 7 189 PED7HB420F280 DR 17 157 PED17HB424F2128 DR 11 195 PED11HB424F2160 DR 9 233 PED9HB424F2128 DR 7 288 PED7HB424F2
Part #
4"4.800"
6 x 5 1/2 x 6 1/2
DIPS FAB 2 SEG. 45 ELBOWNominal Size
Actual ODPressure
Class (psi)FeedStock
DimensionR x C x B (in)
List PriceUn-Machined
6"6.900"
9 1/2 x 6 x 7 3/8
8"9.050"
10 1/2 x 6 1/2 x 8 3/8
Weight per Item (lbs)
14"15.300" 14 7/8 x 8 1/2 x 11 5/8
16"17.400"
16 x 8 1/2 x 13 5/8
10"11.100"
12 3/4 x 6 1/2 x 10 3/4
12"13.200"
13 7/8 x 8 1/2 x 11 1/4
24"25.800"
25 X 8 1/2 X15 3/8
20"21.600"
22 7/8 X 8 1/2 X14 1/2
18"19.500"
17 X 8 1/2 X14
Dimensions and weights are approximate and subject to change
59
02/13
128 DR 11 6 PED11HB9PF3160 DR 9 7 PED9HB9PF3200 DR 7 7 PED7HB9PF3128 DR 11 13 PED11HB9UF3160 DR 9 16 PED9HB9UF3200 DR 7 16 PED7HB9UF3128 DR 11 24 PED11HB9XF3160 DR 9 29 PED9HB9XF3200 DR 7 29 PED7HB9XF380 DR 17 26 PED17HB910F3
128 DR 11 39 PED11HB910F3160 DR 9 47 PED9HB910F3200 DR 7 54 PED7HB910F380 DR 17 43 PED17HB912F3
128 DR 11 64 PED11HB912F3160 DR 9 77 PED9HB912F3200 DR 7 82 PED7HB912F380 DR 17 54 PED17HB914F3
128 DR 11 81 PED11HB914F3160 DR 9 97 PED9HB914F3200 DR 7 118 PED7HB914F380 DR 17 86 PED17HB916F3
128 DR 11 128 PED11HB916F3160 DR 9 152 PED9HB916F3200 DR 7 169 PED7HB916F380 DR 17 117 PED17HB918F3
128 DR 11 174 PED11HB918F3160 DR 9 207 PED9HB918F3200 DR 7 223 PED7HB918F380 DR 17 162 PED17HB920F3
128 DR 11 241 PED11HB920F3160 DR 9 287 PED9HB920F3200 DR 7 312 PED7HB920F380 DR 17 262 PED17HB924F3
128 DR 11 321 PED11HB924F3160 DR 9 383 PED9HB924F3200 DR 7 473 PED7HB924F3
Part #
4" 4.80"
6 X 5 1/2 X 10
DIPS FAB 3 SEG. 90 ELBOW
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionR x C x B (in)
List PriceUn-Machined
6" 6.90
9 1/2 X 6 X 13
8" 9.05"
10 1/2 X 6 1/2 X 14 1/2
Weight per Item (lbs)
14"15.300" 14 7/8 x 8 1/2 x 20 3/8
16"17.400"
16 x 8 1/2 x 23
10"11.100"
12 3/4 x 6 1/2 x 18 1/4
12"13.200"
13 7/8 x 8 1/2 x 19 3/8
24"25.800"
25 x 8 1/2 x 30
18"19.500"
17 x 8 1/2 x 24
20"21.600"
22 7/8 x 8 1/2 x 27 7/8
Dimensions and weights are approximate and subject to change
60
02/13
Nominal Size DR/Wall DimensionsA x B (in)
Package Weight (lbs)
List Price Part #
1/2" CTS DR 0.090 1.69 x 1.79 0.43/4" CTS DR 0.090 1.72 x 2.94 0.8
DR 0.102DR 0.125
3/4" IPS DR 11 2.63 X 4 0.9 PEI11AB9FDR 9DR11 PEI11AB9GDR 9 2.63 X 4DR 10DR 11 PEI11AB9HDR 11 PEI9AB9JDR 9 PEI11AB9JDR 7 10.8DR 9 9.3 PEI9AB9KDR 11 7.6 PEI11AB9KDR17 7.6DR 7 PEI7AB9MDR 9 PEI9AB9M
DR 11/ 11.5 PEI11AB9MDR 13.5DR 17 PEI17AB9MDR 7 PEI7AB9PDR 9 PEI9AB9P
DR 11/11.5 PEI11AB9PDR 13.5DR 17 PEI17AB9P
4" IPS
16.2
16.33.00 X 5.75
11.7
3.00 X 5.13 7.3
1 1/4" IPS 3.22.63 X 4
1 1/2 " IPS 2.63 X 4 5
2" IPS 2.81 X 4.5
3" IPS
3.00 X 5.13
1" IPS 2.63 X 4 1.3
IPS MOLDED 90
1 " CTS 1.69 x 2.94 0.9
Dimensions and weights are approximate and subject to change
61
02/13
Nominal Size DR/Wall DimensionsA x B (in)
Package Weight (lbs)
List Price Part #
IPS MOLDED 90
DR 7 27.2 PEI7AB9UDR 9 26.8 PEI9AB9U
DR 11/11.5 17.3 PEI11AB9UDR 13.5DR 17 PEI17AB9UDR 7 PEI7AB9XDR 9 PEI9AB9XDR 11 PEI11AB9X
DR 13.5DR 17 PEI17AB9XDR17 PEI17AB910DR11 PEI11AB910DR17 PEI17AB912DR11 PEI11AB912
8" IPS 6.00 X 12
26.5
20.2
16.6
6" IPS 4.38 X 9
37.5
6712" IPS 7.50 X 15.88
10" IPS 6.00 x 13.25
Dimensions and weights are approximate and subject to change
62
02/13
Nominal Size Dimensions Weight per List PricePART #
Actual OD Item (lbs.)
2012" 13.20
160 11 7.50 x 15.88 Y
PED11AB9XY 20
10" 11.10"
160 11 6.00 x 13.25 Y 20
11
DIPS 90 ELL
8" 9.05"
160 11 5.17 x 11.58
160
PED11AB9P
PED11AB9U
11 Y 4
11 Y
4”4.80”
4.10 X 7.82
6”6.90”
5.1 x 9.67
Pressure Class (psi)
SDR StandardItemAxB (in)
160
Dimensions and weights are approximate and subject to change63
02/13
Nominal Size DR/Wall DimensionsA x B (in)
Package Weight (lbs)
List Price Part #
DR 7 20 PEI7AB4KDR 9 18.6 PEI9AB4KDR 11 15.2 PEI11AB4KDR17 13DR 7 11.4 PEI7AB9MDR 9 10.8 PEI9AB4M
DR 11/ 11.5 PEI11AB4MDR 13.5DR 17 PEI17AB4MDR 7 PEI7AB4PDR 9 PEI9AB4P
DR 11/11.5 PEI11AB4PDR 13.5DR 17 PEI17AB4PDR 7 PEI7AB4UDR 9 PEI7AB4U
DR 11/11.5 PEI11AB4UDR 13.5DR 17 PEI17AB4UDR 7 PEI7AB4XDR 9 PEI9AB4XDR 11 17 PEI11AB4X
DR 13.5DR 17 PEI17AB4XDR17 PEI17AB410DR11 PEI11AB410DR17 PEI17AB412DR11 PEI11AB412
10" IPS
12" IPS
8" IPS 6.00 x 10.00
22.7
16.30
6.00 X 13.25
7.50 X 15.75
40.76
54
IPS MOLDED 45
2" IPS 2.45 x 3.20
3" IPS 3.10 x 5.389
15.1
3.00 x 4.93 9.4
6" IPS
4.25 x 7.12 20.4
4" IPS
3.00 x 5.38
4.00 x 6.38 13.3
Dimensions and weights are approximate and subject to change
64
02/13
Nominal Size Dimensions Weight per List PriceActual OD Item (lbs.)
11 9.05x.905x5.17x8.32x5.74
4
10
PART #
PED11AB4P
PED11AB4U
PED11AB4X
MOLDED DIPS 45 ELL
Y 158" 9.05"
160
160 11
11
Y
Y
4”4.80”
4.80x.480x4.10x6.05x5.87
6”6.90”
6.90x.690x5.10x7.16x4.44
Pressure Class (psi)
SDR StandardItemAXBXCXDXE (in)
160
Dimensions and weights are approximate and subject to change65
02/13
List Price
Un-Machined
80 DR 17 5 PEI17HBTPF128 DR 11 6 PEI11HBTPF160 DR 9 7 PEI9HBTPF
80 DR 17 12 PEI17HBT17F128 DR 11 14 PEI11HMTUF160 DR 9 18 PEI9HBTUF
80 DR 17 20 PEI17HBTXF128 DR 11 28 PEI11HBTXF160 DR 9 34 PEI9HBTXF
80 DR 17 22 PEI17HBT10F128 DR 11 32 PEI11HBT10F160 DR 9 38 PEI9HBT10F200 DR 7 48 PEI7HBT10F
80 DR 17 37 PEI17HBT12F128 DR 11 55 PEI11HBT12F160 DR 9 66 PEI9HBT12F200 DR 7 82 PEI7HBT12F
80 DR 17 46 PEI17HBT14F128 DR 11 69 PEI11HBT14F160 DR 9 82 PEI9HBT14F200 DR 7 102 PEI7HBT14F
80 DR 17 76 PEI17HBT16F128 DR 11 113 PEI11HBT16F160 DR 9 135 PEI9HBT16F200 DR 7 167 PEI7HBT16F
IPS FAB TEE
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionA x C xE (in)
Weight per Item (lbs) Part #
10"10.750" 8 x 26 3/4 x 8
4"4.500"
6"6.625"
8"8.625"
6 x 16 1/2 x 6
6 x 16 5/8 x 6
8 x 24 5/8 x 8
16"16.000" 9 x 34 x 9
12"12.750" 8 x 28 3/4 x 8
14"14.000" 9 x 32 x 9
Dimensions and weights are approximate and subject to change66
02/13
List Price
Un-Machined
IPS FAB TEE
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionA x C xE (in)
Weight per Item (lbs) Part #
80 DR 17 100 PEI17HBT18F128 DR 11 149 PEI11HBT18F160 DR 9 178 PEI9HBT18F200 DR 7 221 PEI7HBT18F
80 DR 17 140 PEI17HBT20F128 DR 11 209 PEI11BT20F160 DR 9 249 PEI9HBT20F200 DR 7 309 PEI7HBT20F
80 DR 17 178 PEI17HBT22F128 DR 11 262 PEI11BT22F160 DR 9 312 PEI9HBT22F200 DR 7 390 PEI7HBT22F
80 DR 17 216 PEI17HBT24F128 DR 11 322 PEI11HBT24F160 DR 9 385 PEI9HBT24F200 DR 7 481 PEI7HBT24F
80 DR 17 403 PEI17HBT28F128 DR 11 655 PEI11HBT28F160 DR 9 806 PEI9HBT28F
80 DR 17 475 PEI17HBT30F128 DR 11 772 PEI11HBT30F160 DR 9 950 PEI9HBT30F
80 DR 17 799 PEI17HBT32F128 DR 11 1300 PEI11HBT32F
80 DR 17 1242 PEI17HBT36F128 DR 11 2018 PEI11HBT36F
65 DR 21 1440 PEI21HBT42F
80 DR 17 1772 PEI17HBT42F
65 DR 21 1953 PEI21HBT48F
80 DR 17 2404 PEI17HBT48F
18"18.000" 10 x 38 x 10
24"24.000' 12 x 48 x 12
28"28.000" 18 x 56 x 18
20"20.000" 10 x 40 x 10
22"22.000" 12 x 46 x 12
36"36.000" 20 x 76 x 33
42"42.000" 20 x 82 x33
30"30.000" 18 x 58 x18
32"32.000" 18 x 60 x 18
48"48.000" 20 x 88 x33
54"54.000"
52 DR 2620 x 94 x 33
64 DR 21 2259
PEI26HBT54F
PEI21HBT54F
1844
Dimensions and weights are approximate and subject to change67
02/13
100 DR 17 8 PEI17HBTPKF160 DR 11 8 PEI11HBTPKF200 DR 9 9 PEI9HBTPKF100 DR 17 11 PEI17HBTUKF160 DR 11 11 PEI11HBTUKF200 DR 9 13 PEI9HBTUKF100 DR17 16 PEI17HBTXKF160 DR 11 16 PEI11HBTXKF200 DR 9 19 PEI9HBTXKF100 DR 11 23 PEI17HBT10KF160 DR 11 23 PEI11HBT10KF200 DR 9 27 PEI9HBT10KF100 DR 17 24 PEI17HBT12KF160 DR 11 35 PEI11HBT12KF200 DR 9 41 PEI9HBT12KF100 DR 17 15 PEI17HBTPMF160 DR 11 15 PEI11HBTPMF200 DR 9 17 PEI9HBTPMF100 DR 17 15 PEI17HBTUMF160 DR 11 15 PEI11HBTUMF200 DR 9 17 PEI9HBTUMF100 DR 17 20 PEI17HBTXMF160 DR 11 20 PEI11HBTXMF200 DR 9 23 PEI9HBTXMF100 DR 17 27 PEI17HBT10MF160 DR 11 27 PEI11HBT10MF200 DR 9 31 PEI9HBT10MF100 DR 17 28 PEI17HBT12MF160 DR 11 39 PEI11HBT12MF200 DR 9 46 PEI9HBT12MF100 DR 17 32 PEI17HBT14MF160 DR 11 46 PEI11HBT14MF200 DR 9 54 PEI9HBT14MF100 DR 17 40 PEI17HBT16MF160 DR 11 58 PEI11HBT16MF200 DR 9 68 PEI9HBT16MF100 DR 17 49 PEI17HBT18MF160 DR 11 71 PEI11HBT18MF200 DR 9 84 PEI9HBT18MF100 DR 17 59 PEI17HBT20MF160 DR 11 86 PEI11HBT20MF200 DR 9 101 PEI9HBT20MF
Part #
4" X 4 " X 2"
Weight per Item (lbs)
List PriceUn-Machined
6" X 6" X 3"
12" X 12" X 3"
10" X 10" X 2"
12" X 12" X 2"
8" X 8" X 3"
IPS FAB BRANCH SADDLE RED. TEE
Nominal Size Pressure Class (psi)
FeedStock
6" X 6" X 2"
8" X 8" X 2 "
4" X 4" X 3"
20" X 20" X 3"
10 X 10" X 3"
16" X 16" X 3"
18" X 18" X 3"
14" X 14" X 3"
Dimensions and weights are approximate and subject to change68
02/13
IPS FAB BRANCH SADDLE RED. TEE
100 DR 17 82 PEI17HBT24MF160 DR 11 120 PEI11HBT24MF200 DR 9 142 PEI9HBT24MF100 DR 17 26 PEI17HBTUPF160 DR 11 26 PEI11HTUUPF200 DR 9 28 PEI9HBTUPF100 DR 17 32 PEI17HBTXPF160 DR 11 32 PEI11HBTXPF200 DR 9 35 PEI9HBTXPF100 DR 17 39 PEI17HBT10PF160 DR 11 39 PEI11HBT10PF200 DR 9 45 PEI9HBT10PF100 DR 17 39 PEI17HBT12PF160 DR 11 53 PEI11HBT12PF200 DR 9 61 PEI9HBT12PF100 DR 17 45 PEI17HBT14PF160 DR 11 60 PEI11HBT14PF200 DR 9 69 PEI9HBT14PF100 DR 17 53 PEI17HBT16PF160 DR 11 73 PEI11HBT16PF200 DR 9 85 PEI9HBT16PF100 DR 17 63 PEI17HBT18PF160 DR 11 88 PEI11HBT18PF200 DR 9 102 PEI9HBT18PF100 DR 17 74 PEI17HBT20PF160 DR 11 104 PEI11HBT20PF200 DR 9 121 PEI9HBT20PF100 DR 17 99 PEI17HBT24PF160 DR 11 141 PEI11HBT24PF200 DR 9 166 PEI9HBT24PF100 DR 17 39 PEI17HBTXUF160 DR 11 39 PEI11HBTXUF200 DR 9 45 PEI9HBTXUF100 DR 17 39 PEI17HBT10UF160 DR 11 39 PEI11HBT10UF200 DR 9 45 PEI9HBT10UF100 DR 17 39 PEI17HBT12UF160 DR 11 53 PEI11HBT12UF200 DR 9 61 PEI9HBT12UF
6" X 6" X 4"
24" X 24" X 3"
24" X 24" X 4"
18" X 18" X 4"
20" X 20" X 4"
12" X 12" X 4"
14" X 14" X 4"
10" X 10" X 4"
8" X 8" X 4 "
16" X 16" X 4"
8" X 8" X 6"
10" X 10" X 6"
12" X12" X 6"
Dimensions and weights are approximate and subject to change69
02/13
IPS FAB BRANCH SADDLE RED. TEE
100 DR 17 45 PEI17HBT14UF160 DR 11 60 PEI11HBT14UF200 DR 9 69 PEI9HBT14UF100 DR 17 53 PEI17HBT16UF160 DR 11 73 PEI11HBT16UF200 DR 9 85 PEI9HBT16UF100 DR 17 71 PEI17HBT18UF160 DR 11 99 PEI11HBT18UF200 DR 9 117 PEI9HBT18UF100 DR 17 83 PEI17HBT20UF160 DR 11 118 PEI11HBT20UF200 DR 9 138 PEI9HBT20UF100 DR 17 111 PEI17HBT24UF160 DR 11 159 PEI11HBT24UF200 DR 9 188 PEI9HBT24UF100 DR 17 69 PEI17HBT10XF160 DR 11 89 PEI11HBT10XF200 DR 9 100 PEI9HBT10XF100 DR 17 69 PEI17HBT12XF160 DR 11 89 PEI11HBT12XF200 DR 9 100 PEI9HBT12XF100 DR 17 75 PEI17HBT14XF160 DR 11 97 PEI11HBT14XF200 DR 9 11 PEI9HBT14XF100 DR 17 85 PEI17HBT16XF160 DR 11 113 PEI11HBT16XF200 DR 9 129 PEI9HBT16XF100 DR 17 97 PEI17HBT18XF160 DR 11 129 PEI11HBT18XF200 DR 9 149 PEI9HBT18XF100 DR 17 110 PEI17HBT20XF160 DR 11 149 PEI11HBT20XF200 DR 9 172 PEI9HBT20XF100 DR 17 139 PEI17HBT24XF160 DR 11 194 PEI11HBT24XF200 DR 9 225 PEI9HBT24XF100 DR 17 95 PEI17HBT1210F160 DR 11 22 PEI11HBT1210F200 DR 9 138 PEI9HBT1210F100 DR 17 95 PEI17HBT1410F160 DR 11 22 PEI11HBT1410F200 DR 9 138 PEI9HBT1410F100 DR 17 106 PEI17HBT1610F160 DR 11 139 PEI11HBT1610F200 DR 9 158 PEI9HBT1610F
24" X 24" X 8"
14" X 14" X 8"
16" X 16" X 8"
18" X 18" X 8"
20" X 20" X 8"
24" X 24" X 6"
10" X 10" X 8"
12" X 12" X 8"
12" X 12" X10"
14" X 14" X10"
20" X 20" X 6"
18" X 18" X 6"
16" X 16" X10"
14" X 14" X6"
16" X 16" X 6"
Dimensions and weights are approximate and subject to change70
02/13
IPS FAB BRANCH SADDLE RED. TEE
100 DR 17 119 PEI17HBT1810F160 DR 11 157 PEI11HBT1810F200 DR 9 180 PEI9HBT1810F100 DR 17 133 PEI17HBT2010F160 DR 11 178 PEI11HBT2010F200 DR 9 205 PEI9HBT2010F100 DR 17 165 PEI17HBT2410F160 DR 11 226 PEI11HBT2410F200 DR 9 262 PEI9HBT2410F100 DR 17 120 PEI17HBT1412F160 DR 11 158 PEI11HBT1412F200 DR 9 181 PEI9HBT1412F100 DR 17 120 PEI17HBT1612F160 DR 11 158 PEI11HBT1612F200 DR 9 181 PEI9HBT1612F100 DR 17 134 PEI17HBT1812F160 DR 11 178 PEI11HBT1812F200 DR 9 208 PEI9HBT1812F100 DR 17 148 PEI17HBT2012F160 DR 11 199 PEI11HBT2012F200 DR 9 230 PEI9HBT2012F100 DR 17 182 PEI17HBT2412F160 DR 11 251 PEI11HBT2412F200 DR 9 291 PEI9HBT2412F
18" X 18" X10"
24" X 24" X12"
18" X 18" X12"
20" X 20" X12"
24" X 24" X10"
16" X 16" X12"
14" X 14" X12"
20" X 20" X10"
Dimensions and weights are approximate and subject to change71
02/13
160 DR 11 27 PED11HBTXXP200 DR 9 31 PED9HBTXXP
160 DR 11 25 PED11HBT1010P200 DR 9 40 PED9HBT1010P
160 DR 11 49 PED11HBT1212P200 DR 9 57 PED9HBT1212P
160 DR 11 54 PED11HBT1010U200 DR 9 63 PED9HBT1010U
160 DR 11 69 PED11HBT1212U200 DR 9 81 PED9HBT1212U
160 DR 11 84 PED11HBT1414U200 DR 9 99 PED9HBT1414U
160 DR 11 100 PED11HBT1616U200 DR 9 118 PED9HBT1616U
160 DR 11 80 PED11HBT1212X200 DR 9 92 PED9HBT1212X
160 DR 11 115 PED11HBT141410200 DR 9 133 PED9HBT141410
160 DR 11 133 PED11HBT161610200 DR 9 155 PED9HBT161610
160 DR 11 153 PED11HBT161612200 DR 9 178 PED9HBT161612
16" X16" X 10" 10 5/8 X 19 X 34
16" X16" X 12" 10 5/8 X 19 X 36
12" X12" X 8" 8 1/4 X 17 X 28
14" X 14" X 10" 8 5/8 X 18 X 30
16" X16" X 6" 10 1/4 X 18 3/4 X 29
10" X 10" X6" 6 1/4 X 15 1/2 X 21
12" X12" X 6" 7 3/4 X 16 1/2 X 24
14" X 14" X 6" 7 3/4 X 17 3/4 X 24
10" X 10" X 4" 6 1/4 X 15 1/2 X 19
12" X12" X 4" 8 1/4 X 16 1/2 X 23
8" X 8" x 4 " 6 1/4 X 14 1/2 X 19
DIPS FAB BRANCH SADDLE RED. TEE
Weight per Item (lbs)
List Price Un-machined
Part #
*CFP = CALL FOR PRICING
Nominal Size Pressure Class (psi)
FeedStock
DimensionA x B x L (in)
Dimensions and weights are approximate and subject to change72
02/13
80 DR 17 PED17HBTPF128 DR 11 7 PED11HBTPF160 DR 9 9 PED9HBTPF200 DR 7 11 PED7HBTPF80 DR 17 PED17HBTUF
128 DR 11 15 PED11HBTUF160 DR 9 18 PED9HBTUF200 DR 7 23 PED7HBTUF80 DR 17 PED17HBTXF
128 DR 11 31 PED11HBTXF160 DR 9 37 PED9HBTXF200 DR 7 46 PED7HBTXF80 DR 17 35 PED17HBT10F
128 DR 11 52 PED11HBT10F160 DR 9 62 PED9HBT10F200 DR 7 76 PED7HBT10F80 DR 17 59 PED17HBT12F
128 DR 11 88 PED11HBT12F160 DR 9 105 PED9HBT12F200 DR 7 129 PED7HBT12F80 DR 17 86 PED17HBT14F
128 DR 11 128 PED11HBT14F160 DR 9 153 PED9HBT14F200 DR 7 189 PED7HBT14F80 DR 17 119 PED17HBT16F
128 DR 11 178 PED11HBT16F160 DR 9 212 PED9HBT16F200 DR 7 262 PED7HBT16F80 DR 17 100 PED17HBT18F
128 DR 11 260 PED11HBT18F160 DR 9 310 PED9HBT18F200 DR 7 384 PED7HBT18F80 DR 17 226 PED17HBT20F
128 DR 11 336 PED11HBT20F160 DR 9 402 PED9HBT20F200 DR 7 498 PED7HBT20F80 DR 17 564 PED17HBT24F
128 DR 11 840 PED11HBT24F160 DR 9 1003 PED9HBT24F200 DR 7 1240 PED7HBT24F
Part #
4"4.800"
6 x 16.8 x 6
DIPS FAB TEE
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionA x C x E (in)
List PriceUn-Machined
6"6.900"
6 x 18.9 x 6
8"9.050"
8 x 25 x 8
Weight per
Item (lbs)
14"15.300"
9 x 33.3 x 9
16"17.400"
9 x 33.3 x 9
10"11.100"
8 x 27.1 x 8
12"13.200"
8 x 29.2 x 8
24"25.80"
12 x 49.8 x 12
18"19.50"
10 x 39.5 x 10
20"21.60"
10 x 41.6 x 10
Dimensions and weights are approximate and subject to change73
02/13
Nominal Size DR/Wall DimensionsA x B x L (in)
Package Weight (lbs)
List Price Part #
1/2" CTS DR 0.090 1.69 x 2.83 x 5.65 .0.6 3/4" CTS DR 0.090 1.75 X 2.85 X 5.70 1.1
DR 0.102DR 0.125
1/2" IPS DR 9.3 1.72 x 2.94 x 5.88 0.83/4" IPS DR 11 1.72 x 2.94 x 5.88 1.2 PEI11ABTF
DR 9DR11 PEI11ABTGDR 9 4.4DR 10DR 11 PEI11ABTHDR 11 PEI11ABTJDR 9 PEI9ABTJDR 7 14 PEI7ABTKDR 9 11.8 PEI9ABTKDR 11 10.4 PEI11ABTKDR17 10DR 7 15.3 PEI7ABTMDR 9 14.9 PEI9ABTMDR 11/ 11.5 PEI11ABTMDR 13.5DR 17 PEI17ABTMDR 7 23 PEI7ABTPDR 9 22 PEI9ABTPDR 11/11.5 21 PEI11ABTPDR 13.5 20DR 17 19.9 PEI17ABTPDR 7 PEI7ABTUDR 9 PEI9ABTUDR 11/11.5 PEI11ABTUDR 13.5DR 17 PEI17ABTUDR 7 37.6 PEI7ABTXDR 9 36.6 PEI9ABTXDR 11 27.5 PEI11ABTXDR 13.5DR 17 PEI17ABTXDR17 PEI17ABT10DR11 PEI11ABT10DR17 PEI17ABT12DR11 PEI11ABT12
1.88 X 3.38 X 6.76
2.90 X 5.13 X10.26
2.90 X 5.60 X 11.20
4.38 X 9.00 X 18
2.30 X 4.25 X 8.50
8" IPS 6.00 X 12.00 X 24.00
26.3
6" IPS
16.7
11.6
1" IPS 1.75 X 3.19 X 6.38 1.8
1 " CTS 2.25 X 3.62 X 7.25 1.3
81.57.50 X 15.88 X 26.512" IPS
IPS MOLDED TEE
10" IPS 6.00 X 13.25 X26.5 52
1 1/4" IPS 5.2
1 1/2 " IPS 6.6
2" IPS 2.54 X 4.61 X 9.28
4" IPS
3" IPS10.4
Dimensions and weights are approximate and subject to change
74
02/13
Dimensions Package
0.090
12" DR 11 31.75X15.88X1.32X13.20X7.50 88.0
10" DR 11 26.50X13.25X1.11X11.1X6 54.0
4" 15.63 x 7.82 x .480X4.80X3.88SDR 11 21.0
6" SDR 11 19.4X9.67X.690X6.90X4.50 11.6
DIPS TEE
PART #
PED11ABTU
PED11ABTX
PED11ABTP
Butt TeeDR/Wall LIST
AxBXCXDXE (in) Weight (lbs.)
8" DR 11 23.15X11.58X.905X9.05X5.17 27.5
Dimensions and weights are approximate and subject to change75
02/13
Nominal Size
Pressureclass (psi)
FeedStock
DimensionsA x C (in)
Weight perItem (lbs)
List Price Un-machined Part #
128 DR 11 4 PEI11HBXPF160 DR 9 6 PEI9HBXPF
128 DR 11 12 PEI11HBXUF160 DR 9 17 PEI9HBXUF
128 DR 11 29 PEI11HBXXF160 DR 9 42 PEI9HBXXF
80 DR 17 31 PEI17HBC10F128 DR 11 42 PEI11HBC10F160 DR 9 62 PEI9HBC10F
80 DR 17 50 PEI17HBC12F128 DR 11 69 PEI11HBC12F160 DR 9 98 PEI9HBC12F
80 D 17 62 PEI17HBC14F128 DR 11 85 PEI11HBC14F160 DR 9 121 PEI9HBC14F
80 DR 17 85 PEI17HBC16F128 DR 11 116 PEI11HBC16F160 DR 9 166 PEI9HBC16F
80 DR17 165 PEI17HBC18F128 DR 11 226 PEI11HBC18F160 DR 9 322 PEI9HBC18F
80 DR 17 210 PEI17HBC20F128 DR 11 288 PEI11HBC20F160 DR 9 409 PEI9HBC20F
80 DR 17 287 PEI17HBC22F128 DR 11 393 PEI11HBC22F160 DR 9 559 PEI9HBC22F
80 DR 17 316 PEI17HBC24F128 DR 11 433 PEI11HBC24F160 DR 9 620 PEI9HBC24F
14 x 52
3 15/16 x 10 1/4
4 1/2 x 13 1/2
6" 5 x 16 5/8
7 3/4 x 24 3/16
PEI11HBXKF
PEI11HBXMF4
3
128 DR 11 4 x 11 7/16
2" 128 DR 11
8"
3"
4"
10"
24"
IPS FAB CROSS
6 1/2 x 23 3/4
8 x 27 3/4
8 x 30
8 x 32
14 x 46
14 x 48
14 x 50
20"
22"
16"
18"
12"
14"
Dimensions and weights are approximate and subject to change
76
02/13
Nominal Size
Pressureclass (psi)
FeedStock
DimensionsA x C (in)
Weight perItem (lbs)
List Price Un-machined Part #
IPS FAB CROSS
80 DR 17 316 PEI17HBC28F128 DR 11 433 PEI11HBC28F160 DR 9 620 PEI9HBC28F
80 DR 17 316 PEI17HBC30F128 DR 11 433 PEI11HBC30F
80 DR 17 316 PEI17HBC32F128 DR 11 433 PEI11HBC32F
80 DR 17 316 PEI17HBC36F128 DR 11 433 PEI11HBC36F
32" 14 x 60
36" 20 X 76
28" 14 x 56
30" 14 x 58
Dimensions and weights are approximate and subject to change
77
02/13
Nominal Size
Pressureclass (psi)
FeedStock
DimensionsA x C (in)
Weight perItem (lbs)
List Price Un-machined Part #
128 DR 11 10 PED11HBCPF160 DR 9 15 PED9HBCPF128 DR 11 21 PED11HBCUF160 DR 9 31 PED9HBCUF128 DR 11 42 PED11HBCXF160 DR 9 62 PED9HBCXF128 DR 11 69 PED11HBC10F160 DR 9 102 PED9HBC10F128 DR 11 123 PED11HBC12F160 DR 9 182 PED9HBC12F128 DR 11 170 PED11HBC14F160 DR 9 252 PED9HBC14F128 DR 11 232 PED11HBC16F160 DR 9 343 PED9HBC16F128 DR 11 307 PED11HBC18F160 DR 9 453 PED9HBC18F128 DR 11 405 PED11HBC20F160 DR 9 597 PED9HBC20F128 DR 11 644 PED11HBC24F160 DR 9 950 PED9HBC24F
30" 128 DR 11 1098 PED11HBC30F
6 1/2 x 22
8 x 29 1/4
DIPS FAB CROSS
24" 14 x 53 3/4
18" 14 x 47 1/2
20" 14 x 49 5/8
14"
8"
4" 4 x 12 3/4
6" 6 x 18 7/8
8n x 31 1/4
16" 14 x 45 3/8
10" 8 x 27 1/8
12"
Dimensions and weights are approximate and subject to change
78
02/13
100 DR 11 2 PEI11HBYKF126 DR 9 3 PEI9HBYKF100 DR 11 4 PEI11HBYMF126 DR 9 5 PEI9HBYMF63 DR 17 7 PEI17HBYPF100 DR 11 8 PEI11HBYPF126 DR 9 10 PEI9HBYPF63 DR 17 19 PEI17HBYUF100 DR 11 21 PEI11HBYUF126 DR 9 28 PEI9HBYUF63 DR 17 40 PEI17HBYXF100 DR 11 45 PEI11HBYXF126 DR 9 54 PEI9HBYXF63 DR 17 55 PEI17HBY10F100 DR 11 81 PEI11HBY10F126 DR 9 97 PEI9HBY10F63 DR 17 82 PEI17HBY12F100 DR 11 122 PEI11HBY12F126 DR 9 146 PEI9HBY12F63 DR 17 111 PEI17HBY114126 DR 11 165 PEI11HBY14F126 DR 9 197 PEI9HBY14F63 DR 17 160 PEI17HBY16F100 DR 11 239 PEI11HBY16F126 DR 9 PEI9HBY16F63 DR 17 215 PEI17HBY18F100 DR 11 320 PEI11HBY18F126 DR 9 PEI9HBY18F
16"16.000"
70 x 10 1/2 x 55 3/4
18"18.00"
71 x 10 1/2 x 57 1/4
12"12.75"
44 x 8 x 33 3/8
14" 14.00"
55 x 8 x 43 7/8
8"8.625"
36 1/4 x 8 x 26 3/8
10"10.75"
41 1/4 x 8 x 31
4"4.50"
24 3/8 x 4 x 19 1/2
6"6.625"
31 3/8 x 6 x 24
2"2.375"
21 x 4 x 16 7/8
3" 3.500 23 x 4 x 18 1/4
DimensionsL x C x J (in)
List Price
Part #
IPS FAB LATERAL
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
Weight per Item (lbs)
Dimensions and weights are approximate and subject to change
79
02/13
DimensionsL x C x J (in)
List Price
Part #
IPS FAB LATERAL
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
Weight per Item (lbs)
63 DR 17 325 PEI17HBY20F100 DR 11 485 PEI11HBY20F126 DR 9 PEI9HBY20F63 DR 17 411 PEI17HBY22F100 DR 11 613 PEI11HBY22F126 DR 9 PEI9HBY22F63 DR 17 510 PEI17HBY24F100 DR 11 760 PEI11HBY24F126 DR 9 PEI9HBY24F
24"24.00"
82 x 12 x 65
20"20.00"
78 x 12 x 62
22"22.000"
80 x 12 x 63 1/2
Dimensions and weights are approximate and subject to change
80
02/13
22" x22" x6" DR 11 47 3/8 x 40 5/8 x 12 138100
14" x14" x 6" DR 11 35 3/8 x 28 5/8 x 8 69100
16" x 16 " x 6" DR 11 35 3/8 x 29 5/8 x 8 83100
10" x 10" x 6" DR 11 34 1/4 x 26 1/4 x 7 5/8
24" x 24" x 6" DR 11 47 3/8 x 41 5/8 x 12 159100
18" x18" x 6" DR 11 35 3/8 x 30 5/8 x 8 99100
20" x 20" x 6" DR 11 47 3/8 x 39 5/8 x 12 118100
47100
12" x 12" x 6" DR 11 34 1/4 x 27 1/4 x 7 5/8 61100
24" x 24" x 4" DR 11 43 3/4 x 39 7/8 x x 12 141100
8" x 8" x 6" DR 11 34 1/4 x 25 1/4 x 7 5/8 40100
43 3/4 x 38 7/8 x 12 122
20" x20" x4" DR 11 43 3/4 x 37 7/8 x 12 104100
10022" x22" x4" DR 11
16" x 16" x 4" DR 11 31 3/4 x 27 7/8 x 8 73100
18" x18" x 4" DR 11 31 3/4 x 28 7/8 x 8 88100
12" x 12" x4" DR 11 30 5/8 x 25 1/2 x 7 5/8 53100
14" x14" x4" DR 11 31 3/4 x 26 7/8 x 8 60100
8" x 8" x 4" DR 11 30 5/8 x 23 3/8 x 7 5/8 32100
10" x 10" x 4" DR 11 30 5/8 x 24 1/2 x 7 5/8 39100
Part #
6" x 6" x 4" DR 11 25 3/4 x 19 1/8 x 6 26100
List Price
IPS FAB REDUCING LATERAL
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
DimensionsL x X x C (in)
Weight per Item (lbs)
PEI11HBY22UF
PEI11HBY24UF
PEI11HBYXPF
PEI11HBYUPF
PEI11HBY18UF
PEI11HBY20PF
PEI11HBY20UF
PEI11HBY22PF
PEI11HBY24PF
PEI11HBYXUF
PEI11HBY14UF
PEI11HBY16PF
PEI11HBY16UF
PEI11HBY18PF
PEI11HBY10PF
PEI11HBY10UF
PEI11HBY12PF
PEI11HBY12UF
PEI11HBY14PF
Dimensions and weights are approximate and subject to change81
02/13
100 DR 11 10 PED11HBYPF126 DR 9 12 PED9HBYPF100 DR 11 25 PED11HBYUF126 DR 9 30 PED9HBYUF100 DR 11 48 PED11HBYXF126 DR 9 58 PED9HBYXF63 DR 17 58 PED17HBY10F
100 DR 11 87 PED11HBY10F126 DR 11 103 PED9HBY10F63 DR 17 88 PED17HBY12F
100 DR 11 130 PED11HBY12F126 DR 9 150 PED9HBY12F63 DR 17 133 PED17HBY14F100 DR 11 198 PED11HBY14F63 DR 17 190 PED17HBY16F
100 DR 11 283 PED11HBY16F63 DR 17 252 PED17HBY18F
100 DR 11 376 PED11HBY18F63 DR 17 380 PED17HBY20F100 DR 11 566 PED11HBY20F63 DR 17 590 PED11HBY24F100 DR 11 878 PED11HBY24F
20"21.600"
80 x 12 x 63 1/8
24"25.800"
82 x 12 x 63 1/8
16"17.400"
71 x 10 /2 x 56 5/8
18"19.500"
78 x 12 x 61 1/2
12"13.200"
49 3/4 x 10 x 36 3/4
14"15.300"
70 x 10 1/2 x 55 7/8
8"9.050"
41 1/4 x 8 x 30 5/8
10"11.100"
44 x 8 x 33
4"4.800"
31 3/8 x 6x 23 5/8
6"6.900"
36 1/4 x 8x 26
DimensionsL x C x J (in)
List Price
Part #
DIPS FAB LATERAL
Nominal SizeActual OD
Pressure Class (psi)
FeedStock
Weight per Item (lbs)
Dimensions and weights are approximate and subject to change82
02/13
DI PS AND IPS ELECTROFUSION COUPLING
SIZE DESCRIPTION LIST Ferguson Part #
1/2" CTS 4.7R ASTM D2513/F1055-GAS AWWA C906
1/2" IPS 4.7R ASTM D2513/F1055 AWWA C906
3/4" CTS 4.7R ASTM 025131F1055 AWWA C906
3/4" IPS 4.7R ASTM D25131F1055-GAS AWWA C906
1" CTS 4.7R ASTM D25131F1055-GAS AWWA C906
1" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 C5760024
1 1/4" CTS 4.7R ASTM D2513/F1055 AWWA C906
1 1/4" DUCT 4.7R 1.4880D DUCT PSI=0 ASTM F1055
1 1/4" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906
1 1/4" SIDR 4.7R 1,580 OD CONDUIT PS=0
1 1/2" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 C5760028
2" CTS 4.75 ASTM F1055 AWWA C906
2" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 C5760030
3" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 C10000358
4" DIPS 4.7S ASTM F1055 AWWA C906 C10000353
4" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 FM 1610 CL 200 C10000360
6" DIPS 4.7S ASTM F1055 AWWA C906 C10000354
6" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 FM 1610 CL 200 C10000359
7" IPS 3P ASTMF1055
8" DIPS 4.7S ASTM F1055 AWWA C906 C10000355
8" IPS 4.7R ASTM D2513/F1055-GAS AWWA C906 FM 1610 CL 200 C10000361
10" DIPS 4.7S ASTM D2513/F1055 AWWA 0906 C10000356
10" IPS 4.7R ASTM D2513/F1055 AWWA C906 FM 1610 CL150
10" IPS 4.7S ASTM 02513/F1055 AWWA C906 FM 1610 CL150 C10000362
12" DIPS 4.7S ASTM D2513/F1055 AWWA C906 C10000357
12" IPS 4.7R ASTM D25131F1055 AWWA C906 FM 1610 CL150
12" IPS 4.7R ASTM 025131F1055 AWWA C906 FM 1610 CL150 C10000363
83
02/13
PRODUCT LIST PART #10000202 C1000020210000204 C1000020410000207 C1000020710000210 C1000021010000213 C1000021310000216 C1000021610000205 C1000020510000208 C1000020810000211 C1000021110000214 C1000021410000218 C10000218
PRIOR TO SHIPMENT WE NEED A COPY OF THE CERTIFICATE THAT THE INSTALLER HAS COMPLETED A LARGE DIAMERTER
QUALIFICATION CLASS FROM GEORG FISCHER/CENTRAL PLASTICS
24" DIPS PE3408/PE100, 4.7S
18" DIPS PE3408/PE100, 4.7S20" DIPS PE3408/PE100, 4.7S
16" DIPS PE3408/PE100, 4.7S
ELECTROFUSION LARGE DIAMETER COUPLINGS
PE3408/PE100, 4.7S, PE3408/PE100, 4.7S, PE3408/PE100, 4.7S,
SIZE DESCRIPTION14" IPS16" IPS
PE3408/PE100, 4.7S, PE3408/PE100, 4.7SPE3408/PE100, 4.7S
18" IPS20" IPS22" IPS24" IPS
14" DIPS PE3408/PE100, 4.7S
84
02/13
85
02/13
86
02/13
FOR REFERENCE ONLY
FULL COUPLINGS
EF LDC 4-12 DIPS SINGLE COIL PLOW-IN 02/06/09
PLOW-IN STYLE SINGLE COIL Georg Fischer Central Plastics LLC Phone: 800-654-3872 39605 Independence St. 405-273-6302 Shawnee, OK USA 74801 Fax: 800-733-5993 www.centralplastics.com 405-273-5993
LARGE DIAMETER DIPSELECTROFUSION FITTINGS
NOMINAL INSIDE DIA. INSIDE DIA. OUTSIDE DIA. STAB DEPTH OVERALL LENGTHSIZE (MAXIMUM) (MINIMUM) (NOMINAL) (NOMINAL) (NOMINAL)
I.D. I.D. O.D. D L
4 DIPS 4.846 4.810 6.06 3.46 6.93123.09 mm 122.17 mm 154.0 mm 88.0 mm 176.0 mm
6 DIPS 6.966 6.925 8.74 4.09 8.19176.94 mm 175.90 mm 222.0 mm 104.0 mm 208.0 mm
8 DIPS 9.140 9.110 11.14 5.08 10.16232.16 mm 231.39 mm 283.0 mm 129.0 mm 258.0 mm
10 DIPS 11.110 11.080 13.7 5.5 10.9282.19 mm 281.43 mm 347 mm 139 mm 278 mm
12 DIPS 13.210 13.180 16.2 6.4 12.8335.53 mm 334.77 mm 412 mm 163 mm 326 mm
87
02/13
CouplingsLargeIPS14.xls13/09/01
FOR REFERENCE ONLY
FULL COUPLINGSLARGE DIAMETER IPS SDR 11 PLOW-IN STYLE SINGLE COIL
ELECTO
FUSIO
N FITTIN
GS
39605 Independence, Shawnee, OK, 74804 | 1.800.654.3872 | www.gfcp.com
88
02/13
CouplingsLargeIPS.xls13/09/01
FOR REFERENCE ONLY
FULL COUPLINGSLARGE DIAMETER IPS SDR 11 PLOW-IN STYLE DUAL COIL
ELECTO
FUSIO
N FITTIN
GS
39605 Independence, Shawnee, OK, 74804 | 1.800.654.3872 | www.gfcp.com
89
02/13
90
02/13
CouplingsLargeDIPS.xls13/09/01
FOR REFERENCE ONLY
FULL COUPLINGSLARGE DIAMETER DIPS DR 11 PLOW-IN STYLE DUAL COIL
ELECTO
FUSIO
N FITTIN
GS
39605 Independence, Shawnee, OK, 74804 | 1.800.654.3872 | www.gfcp.com
91
02/13
Industrial Plastics Division Polyethylene FM Catalog
Factory Mutual HDPE Pipe and Fittings Factory Mutual Fire Protection Piping Systems Many industrial facilities require the FM Global approval for the plant piping components. Major insurance companies that focus on insuring large manufacturing facilities have found that risk was reduced when the fire and safety piping systems in a facility met the standards recognized by Factory Mutual. FM Global is a leading commercial insurance company that forms long term partnerships with their clients to support risk management objectives through a unique combination of engineering, underwriting and claims. 1. Industrial Plastics Division located in Washougal Washington manufactures quality high density polyethylene fittings and distributes HDPE pipe manufactured to the high standards set by FM Global. Our manufacturing methods insure a system with unique traceability. Each item is clearly marked showing the FM Global approval.
FM Global Approved
1. (www.fmglobal.com)
92
02/13
Industrial Plastics Division Polyethylene FM Catalog Material Standards Industrial Plastics Division manufactures FM Global approved HDPE fittings from HDPE pipe that is produced per ASTM D 3350-02 to a cell classification of 345464C. All FM Global HDPE fittings produced at our manufacturing facility have passed the requirements listed by FM Global. These fittings have passed our strict testing and quality control system. Our quality control system provides a marking on the product that is permanent and can not be altered or removed. Manufacturing Standards FM Global has approved HDPE fabricated fittings manufactured by Industrial Plastics Division and has witnessed the testing and procedures at the plant. Industrial Plastics Division manufactures the HDPE FM fittings using state of the art fusion machinery. All fittings are made using a data logging system to insure all parts of the fusion process are in compliance and traceable. Industrial Plastics Division also marks the fittings with a stamp to insure that the fitting can always be traced back to the manufacturing information. Industrial Plastics Division is the only HDPE fitting manufacturer to add this level of control. Piping Material Properties High density polyethylene plastic pipe (HDPE) delivers exceptional value, unwavering reliability and remarkable advantages over conventional types of piping. Other reasons HDPE is a superior choice:
Long-term service life Highly-resistant to corrosion, abrasion and chemicals Strong, durable, flexible and lightweight Longer-length pipe with leak-proof joints Lower labor requirements for installations Significant overall cost savings
FM Global
93
02/13
Approved Industrial Plastics Division Polyethylene FM Catalog FM Global Product Properties and Dimensions FM Global piping systems are manufactured to iron pipe size specifications (IPS).Table 1 below lists the nominal size, outside diameter and wall thickness for Class 150 and Class 200 HDPE FM pipe. Table 1____________________________________________________
94
02/13
IPS Fabricated 2-Segment 22.5º ELL
All sizes up to 24" conform to AWWA C906 Requirements.Pressure Ratings are for water at 73.4۫ F.
PEI7FMB22510F2
PEI9FMB22510F2
Product Code
PEI7FMB225XF2
PEI9FMB225XF2
8 161
8 108
8
PEI7FMB22516F2
PEI9FMB22516F2
PEI7FMB22514F2
PEI9FMB22514F2
PEI7FMB22512F2
PEI9FMB22512F2
PEI7FMB22524F2
PEI9FMB22524F2
PEI7FMB22520F2
PEI9FMB22520F2
PEI7FMB22518F2
PEI9FMB22518F2
List Price
150 9 9010 20" 200 7
20.00"
150 9 13510 3/824" 200 7
24.00"
85
150 9 719 3/418" 200 7
18.00"
16.00"
8 51
150 9 419 3/8
8 66
150 9 559 5/8
14" 200 7
14.00"
12" 200 7
16" 200 7
24
150 9 2010.75"
42
150 9 3412.75"8 9 1/4
Weight (lbs)
8" 200 7 15
150 9 128.625"6 1/2
FINISH
CIPS Size PC SDR A
7
6 1/2 7 5/810" 200 7
* Dimensions and weights are approximate and subject to change.
SupplementsDWG 14
12/14/2009
95
02/13
IPS Fabricated 2-Segment 45۫ º ELL
All sizes up to 24" conform to AWWA C906 Requirements.Pressure Ratings are for water at 73.4۫ F.
FINISH
IPS Size PC SDR R A C LIST PRICEWeight (lbs)
8" 200 7 10 1/4 6 1/2 8 3/8
16
150 9
10 5/882
150 9 6612.75"
128.625"
10" 200 7 12 5/8 6 1/2 8 3/4
48
150 9 3810.75"
18" 200 7 16 1/4
18.00"
8
12" 200 7 13 5/8 8
16" 200 7 15 1/4
16.00"
14" 200 7 14 1/4
14.00"
24" 200 7 24 1/16
24.00"
309
150 9 24920" 200 7
17 1/420.00"
13 481
150 9 3858
8 12 1/8
11 3/4221
150 9 1788
10 7/8102
150 9 82
11 5/16167
150 9 135
8
PEI7FMB424F2
PEI9FMB424F2
PEI7FMB420F2
PEI9FMB420F2
Product Code
PEI7FMB4XF2
PEI9FMB4XF2
PEI7FMB414F2
PEI9FMB414F2
PEI7FMB412F2
PEI9FMB412F2
PEI7FMB410F2
PEI9FMB410F2
PEI7FMB418F2
PEI9FMB418F2
PEI7FMB416F2
PEI9FMB416F2
* Dimensions and weights are approximate and subject to change.
DWG 1Last Update11/17/2009
96
02/13
IPS Fabricated 3-Segment 45 ۫ º ELLAll sizes up to 24" conform to AWWA C906 Requirements.
Pressure Ratings are for water at 73.4 ۫ F.
24.00"
171
9 14420.00"
200 20"
LIST PRICE
150 8
132
9 111
16 1/2
272
9 228
200
150
74
9 6014.00"
200 14" 7 21 8 13 7/8
6013 1/2
48
7 19 1/2 8
9 12.75"
200
150 12"
10" 7 17 1/4 6 1/2
10.75"
200
150 11 1/4
35
9 29
PC
FINISH
IPS Size SDR R A C Weight (lbs)
8" 7 16 1/4 6 1/2
8.625"
200
150 10 7/8
22
9 18
24" 7 36
150 8
14 3/4
200 7 27
150 8 15 5/8
150 8
18.00"
18"
9 16.00"
200 16" 7 24
7 30
PEI7FMB410F3
PEI9FMB410F3
Product Code
PEI7FMB4XF3
PEI9FMB4XF3
PEI7FMB414F3
PEI9FMB414F3
PEI7FMB412F3
PEI9FMB412F3
PEI7FMB418F3
PEI9FMB418F3
PEI7FMB416F3
PEI9FMB416F3
PEI7FMB424F3
PEI9FMB424F3
PEI7FMB420F3
PEI9FMB420F3
18 1/8
99
83
* Dimensions and weights are approximate and subject to change.
DWG 2Last Update11/17/2009
97
02/13
IPS Fabricated 3-Segment 90۫ º ELLAll sizes up to 24" conform to AWWA C906 Requirements.
Pressure Ratings are for water at 73.4۫ F.
27 1/16356
150
135
22 1/4 209
9 298
175
200 7
20" 200 7 17 1/4 8
150 9
24 1/16 8 24.00"
20.00"
24"
18" 200 7 16 1/4 8 21 1/4
161
150 18.00"
16" 200 7 15 1/4 8 20 1/4
120
150 10016.00"
14" 200 7 14 1/4 8 19 1/4
89
150 7514.00"
12" 200 7 13 5/8 8 18 5/8
72
150 6112.75"
10" 200 7 12 5/8 6 1/2 16 1/8
43
150 3710.75"
FINISH
IPS Size PC SDR R A C Weight (lbs)
8" 200 7 10 3/4 6 1/2 14 5/8
16
138.625"
PEI7FMB910F3
PEI9FMB910F3
Product Code
PEI7FMB9XF3
PEI9FMB9XF3
PEI7FMB914F3
9
9
150 9
9
9
9
LIST PRICE
PEI7FMB924F3
PEI9FMB924F3
PEI7FMB920F3
PEI9FMB920F3
PEI9FMB914F3
PEI7FMB912F3
PEI9FMB912F3
PEI7FMB918F3
PEI9FMB918F3
PEI7FMB916F3
PEI9FMB916F3
* Dimensions and weights are approximate and subject to change.
DWG 3Last Update11/17/2009
98
02/13
IPS Fabricated 5-Segment 90۫ º ELL
All sizes up to 24" conform to AWWA C906 Requirements.Pressure Ratings are for water at 73.4۫ F.
24" 200 7 36
24.00"
8
8 39 1/4 493
150 9 413
34 300
150 9 25120" 200 7
30 20.00"
18" 200 7 27
18.00"
8
8 31 3/8 225
150 9 189
97
28 7/8 164
150 9 13716" 200 7
24 16.00"
14" 200 7 21
14.00"
12.75"
9 4710.75"
12" 200 7 19 1/2 8
IPS Size PC SDR R A C
58
150
Weight (lbs)
8" 200 7 16 1/4 6 1/2 20 3/8
35
298.625"
10" 200 7 17 1/4 6 1/2 21 3/8
PEI7FMB910F5
PEI9FMB910F5
Product Code
PEI7FMB9XF5
PEI9FMB9XF5
PEI7FMB914F5
150 9
FINISH
24 7/8 95
77
120
150 9
8 26 1/4 150 9
LIST PRICE
PEI7FMB924F5
PEI9FMB924F5
PEI7FMB920F5
PEI9FMB920F5
PEI9FMB914F5
PEI7FMB912F5
PEI9FMB912F5
PEI7FMB918F5
PEI9FMB918F5
PEI7FMB916F5
PEI9FMB916F5
* Dimensions and weights are approximate and subject to change.
DWG 4Last Update11/17/2009
99
02/13
IPS Fabricated 3-Segment TEE
All sizes up to 24" conform to AWWA C906 Requirements.Pressure Ratings are for water at 73.4۫ F.
24" 200 7 12
24.00"
40
48 12 481
150 9 385
10 309
150 9 24920" 200 7
10 20.00"
18" 200 7 10
18.00"
34
38 10 221
150 9 178
82
9 167
150 9 13516" 200 7
9 16.00"
14" 200 7 9
14.00"
12.75"
9 3810.75"
12" 200 7 8 28 3/4
IPS Size PC SDR A C E
48
150
Weight (lbs)
8" 200 7 8 24 5/8 8
24
198.625"
10" 200 7 8 26 3/4 8
PEI7FMBT10F
PEI9FMBT10F
Product Code
PEI7FMBTXF
PEI9FMBTXF
PEI7FMBT14F
150 9
FINISH
8 82
66
102
150 9
32 9 150 9
LIST PRICE
PEI7FMBT24F
PEI9FMBT24F
PEI7FMBT20F
PEI9FMBT20F
PEI9FMBT14F
PEI7FMBT12F
PEI9FMBT12F
PEI7FMBT18F
PEI9FMBT18F
PEI7FMBT16F
PEI9FMBT16F
* Dimensions and weights are approximate and subject to change.
DWG 5Last Update11/17/2009
100
02/13
IPS Saddle Reducing Tees 3" Branch
All saddle reducing tees thru 24" mains conform to AWWA C906 Requirements.Pressure Ratings are for water at 73.4۫ F.
PEI9FMBT24MF
PEI9FMBT20MF
PEI7FMBT24MF
PEI9FMBT18MF
PEI7FMBT20MF
PEI9FMBT16MF
PEI7FMBT18MF
PEI9FMBTXMF
PEI7FMBT10MF
Product Code
PEI7FMBTXMF
150
PEI7FMBT12MF
LIST PRICE
200
17 33
9
PEI9FMBT14MF
PEI7FMBT16MF
PEI9FMBT12MF
PEI7FMBT14MF
PEI9FMBT10MF
43
37
59
8 16 20
FINISH
IPS Size SDR A B L
150
200
17
150
200
150
7 6 1/2 13
150
200
9
12"x12"x3"7
8 14 20
7
Weight (lbs)
8"x8"x3"7
6 1/2 12
16"x16"x3"
200
PC
200
150
200 10"x10"x3"
200
150
14"x14"x3"7
8 15 20 67
9 58
30
83
9 71
9 51
9 139
86
20 119
102
20
7 8 17 20
100
9 18"x18"x3"
20"x20"x3"7
8 18 9
16424"x24"x3"
7 8 20
150
* Dimensions and weights are approximate and subject to change.
DWG 5.75NEW
6/25/2010
101
02/13
IPS Saddle Reducing Tees 4" Branch
All saddle reducing tees thru 24" mains conform to AWWA C906 Requirements.
Pressure Ratings are for water at 73.4۫ F.
141
88
21 121
104
21
8 17
166
7 8 15 21
69
9 60
21 102
9
7 8 16 21
85
9 73
7
24"x24"x4"7
8 20 150
200
150
200
150
200
20"x20"x4"7
8 18 9
18"x18"x4"
9
16"x16"x4"
200
PC
200
150
200 10"x10"x4"
200
150
8"x8"x4"
12"x12"x4"
14"x14"x4"
150
200
150
150
FINISH
IPS Size SDR A B L
7 6 1/2 12 18
9
9
7 8 14 21
9
PEI9FMBTXPF
PEI7FMBT10PF
Product Code
PEI7FMBTXPF
PEI9FMBT12PF
7 6 1/2 13
LIST PRICE
PEI7FMBT14PF
PEI9FMBT10PF
PEI7FMBT12PF
18
Weight (lbs)
35
32
45
39
61
53
PEI9FMBT16PF
PEI7FMBT18PF
PEI9FMBT14PF
PEI7FMBT16PF
PEI9FMBT24PF
PEI9FMBT20PF
PEI7FMBT24PF
PEI9FMBT18PF
PEI7FMBT20PF
* Dimensions and weights are approximate and subject to change.
DWG 6Last Update11/17/2009
102
02/13
IPS Saddle Reducing Tees 6" BranchAll saddle reducing tees thru 24" mains conform to
AWWA C906 Requirements.Pressure Ratings are for water at 73.4۫ F.
20"x20"x6"7
8 20 23 138
9 118
24"x24"x6"7
8 22 23 188
9 159
200
18"x18"x6"7
8 19 200
60
16"x16"x6"7
8 18
117
9 99
14"x14"x6"7
8 17 23 69
9
85
9 73150
12"x12"x6"7
8 16
PC
FINISH
150
B LSDR
10"x10"x6"7
6 1/2 15 20 9
IPS Size
9
Product Code
PEI7FMBT10UF
PEI9FMBT10UF
150
23 150
200
150
200
200
A
150
200
23 200
150
23
Weight (lbs)
45
39
61
53
LIST PRICE
PEI7FMBT24UF
PEI9FMBT24UF
PEI7FMBT20UF
PEI9FMBT20UF
PEI7FMBT14UF
PEI9FMBT14UF
PEI7FMBT12UF
PEI9FMBT12UF
PEI7FMBT18UF
PEI9FMBT18UF
PEI7FMBT16UF
PEI9FMBT16UF
* Dimensions and weights are approximate and subject to change.
DWG 7Last Update11/17/2009
103
02/13
IPS Saddle Reducing Tees 8" Branch
All saddle reducing tees thru 24" mains conform to AWWA C906 Requirements.
Pressure Ratings are for water at 73.4۫ F.
225
9 194150
20 25 150
200
172
149
24"x24"x8"7
8 23 25 200
20"x20"x8"7
8 21 25 9
200
150
FINISH
IPS Size SDR A BPC L
18"x18"x8"7
8
150
200
150
14"x14"x8"7
8 9
9 16"x16"x8"
7
9
200
150
200 18
12"x12"x8"7
8 17 9
Product CodeWeight (lbs)
100
89
25 110
25 PEI7FMBT12XF
PEI9FMBT12XF
129
LIST PRICE
149
97
25 8 19
PEI7FMBT14XF
PEI9FMBT14XF
129
113
PEI9FMBT18XF
PEI7FMBT16XF
PEI9FMBT16XF
PEI7FMBT24XF
PEI9FMBT24XF
PEI7FMBT20XF
PEI9FMBT20XF
PEI7FMBT18XF
* Dimensions and weights are approximate and subject to change.
DWG 8Last Update11/17/2009
104
02/13
IPS Saddle Reducing Tees 10" BranchAll saddle reducing tees thru 24" mains conform to
AWWA C906 Requirements.Pressure Ratings are for water at 73.4۫ F.
8
FINISH
IPS Size PC SDR A B L
18 27
LIST PRICE
150 9 14"x14"x10"
200 7
27 158
150 9 16"x16"x10"
200 7 8
18"x18"x10"200 7
8
19
20 27 180
150 9
27 205
150 9 21 20"x20"x10"
200 7 8
24"x24"x10"200 7
8 23 27 262
150 9
Product Code
226
178
157
139
122
Weight (lbs)
PEI7FMBT1810F
PEI7FMBT1610F
PEI9FMBT1610F
138
PEI7FMBT2410F
PEI7FMBT1410F
PEI9FMBT1410F
PEI9FMBT2410F
PEI7FMBT2010F
PEI9FMBT2010F
PEI9FMBT1810F
* Dimensions and weights are approximate and subject to change.
DWG 9Last Update11/17/2009
105
02/13
IPS Saddle Reducing Tees 12" Branch
All saddle reducing tees thru 24" mains conform to AWWA C906 Requirements.
Pressure Ratings are for water at 73.4۫ F.
LIST PRICE
29 230
9 199
29 291
9 25124"x24"x12"
7 8 24
150
200
20"x20"x12"7
8 22 200
150
16"x16"x12"7
8 20 29 9
200
FINISH
IPS Size SDR A B L Product Code
PEI7FMBT1612F
PEI9FMBT1612F
PEI7FMBT1812F200
150
PC Weight (lbs)
29
181
158
8 21 18"x18"x12"7 208
9 178150
PEI7FMBT2412F
PEI9FMBT2412F
PEI9FMBT1812F
PEI7FMBT2012F
PEI9FMBT2012F
* Dimensions and weights are approximate and subject to change.
DWG 10Last Update11/17/2009
106
02/13
IPS FABRICATED Reducers
Pressure Ratings are for water at 73.4۫ F.
LIST PRICE
PEI11FMBR1816
PEI9FMBR2018
Product Code
PEI9FMBR1412
PEI11FMBR1412
PEI9FMBR1614
24" IPS x 20" IPS200
20147
150 123
PEI11FMBR2018
PEI9FMBR2420
PEI11FMBR2420
PEI11FMBR1614
PEI9FMBR1816
200 20
43
36
2099
150 83
2077
150 64
200 18" IPSx 16"IPS
20" IPS x 18"IPS200
150
IPS Size PC Dimension L
16" IPSx 14" IPS200
2057
150 48
Weight (lbs)
14"IPS x 12"IPS
* Dimensions and weights are approximate and subject to change.
DWG 11Last Update11/17/2009
107
02/13
IPS FLANGE ADAPTERPE 3408 HDPE
All sizes up to 24" conform to AWWA C906 Requirements.Pressure Ratings are for water at 73.4۫ F.
LIST PRICE
150 0.5 PEI11FMBFK
150 1 PEI11FMBFM
150 2 PEI11FMBFP
150 4 PEI11FMBFU
150 7 PEI11FMBFX
150 11 PEI11FMBF10
150 22.3 PEI11FMBF12200 50 PEI9FMBF14
200 75 PEI9FMBF16
200 80 PEI9FMBF18
200 85 PEI9FMBF20
200 100 PEI9FMBF24
49.41
61.62
39.4
1.5
10.758.50
0.80 6.00 2.3
11
6.8
1710.6012.75
PEI11FMBF24
PEI9FMBF10
PEI9FMBF12
PEI11FMBF14
PEI11FMBF16
Product Code
PEI9FMBFP
PEI9FMBFU
PEI9FMBFX
PEI9FMBFK
PEI11FMBF18
PEI11FMBF20
PEI9FMBFM
20" 12.00 23.47150 20.00"
91.324.00"
24" 14.00 27.90150
3.572.304.252.90
18" 12.00 21.38150
20.00150 16.00"
18.00"
16" 12.002.221.903.212.10
8" 9.020 1.20
11.0012.75"
6.625" 7.99 0.80
200 8.625" 9.02 0.8010" 200 11.00 1.49
4.50" 5.98 0.80 6.60
IPS Size
4"
6" 200
2" 200
2.375"
200
5.98
3.50"
3" 200
0.92 8.1257.990
5.98
5.98 0.40 4.00
5.98
DIMENSIONS
PC A T C
0.45 4.00
5.98
Weight (lbs)
0.75
0.60 5.00
0.60 5.00
150 29.7
200 12"
10.75" 11.00 1.30 12.80
14"
26.215.00
11.00 17.5014.00"
1.771.501.701.70
* Dimensions and weights are approximate and subject to change.
DWG 12Last Update11/17/2009
108
02/13
Ductile Iron Back-Up Ring
Medium pressure flange for use on HDPE, SS and carbon steel stub endsCast in ductile iron A536 (65/45/12) tensile 65,000 psi; yeild 45,000 psi; 12% elongationBolt circle is ANSI/B16.5 class 150. Mates with ANSIB16.5, B16.47, AWWA C207Fishished in red oxide primer, hot dipped galvanized, epoxy coated
WEIGHT
( LBS ) 150 200
14" 21.00 1.63 14.18
16"
24" 32.00 2.13 24.38
23.50 1.88
1.38
18" 25.00 1.75 18.20
20" 27.50 2.06 20.20 1.25
IBUPSCL200FM24
IBUPSCL200FM14
IBUPSCL200FM16
IBUPSCL200FM18
IBUPSCL200FM20
29.50 91 X X
X X
61 X
21.25 49
25.00
X
14.25 17 X
Product Code
IBUPSCL200FMK
IBUPSCL200FMM
IBUPSCL200FMP
X
IBUPSCL200FMU
IBUPSCL200FMX
IBUPSCL200FM10
IBUPSCL200FM12
LIST PRICE
X
X
X
X
12" 19.00 1.50 12.92
10" 16.00 1.19
6" 11.00 1.00 6.75
8" 13.50 1.12 8.75
10.92
2" 6.00 0.75 0.75
IPS Size O.D. T I.D
4" 9.00 0.94 4.60
3" 7.50 0.94 3.60
X X2.46
B.D B.CFM
4.75
0.75 7.50 6
3
0.75 6.00 4 XX
X X
8 X9.50
X
1.13
16.19
1.25 22.75 49
1.00 17.00 25 X
18.75 37 X X
0.88
1.13
1.00
0.88 11.75 12 X
* Dimensions and weights are approximate and subject to change.
DWG 13Last Update11/17/2009
109
02/13
IPS MJ Adaptor
Pressure Ratings are for water at 73.4۫ F.
200 PEI9FMMJPA
150 PEI11FMMJPA
200 PEI9FMMJUA
150 PEI11FMMJUA
200 PEI9FMMJXA
150 PEI11FMMJXA
200 PEI9FMMJ10A
150 PEI11FMMJ10A
200 PEI9FMMJ12A
150 PEI11FMMJ12A
9.500
LIST PRICE
7.500 12
37
6.000 9
11.750
20
Product CodeWeight
(lbs)
6
W
4.750
12.75"
9.050
12"
4.500 4.800
10.750 11.100
12.750 13.200
4"
6.625 6.900
10"
10.75"
6"
8"
2.000 13.000
11.940
2.340 13.560
WITH ACCY KIT WITHOUT STIFFENER
A BNominal Size PC C L
2.340 10.250
6.625"
8.625"8.625
11.310
4.50"
2.340
2.340
* Dimensions and weights are approximate and subject to change.
DWG SO-1Last Update
2/23/2010
110
02/13
IPS Molded 45Pressure Ratings are for water at 73.4۫ F.
Nominal Size PC Dimensions
A x B (in)Weight
(lbs) LIST PRICE Product Code
3.50" 150 2.3 PEI11FMB4M
4.50" 150 2.8 PEI11FMB4P
6.625" 150 7.09 PEI11FMB4U
8.625" 150 20.93 PEI11FMB4X
2.9
7.14
PEI9FMB4M
PEI9FMB4P
PEI9FMB4U
PEI9FMB4X21.56.00X11.00
3.10 x 5.38
3.00X5.00
4.38X7.00
200
200
3" IPS
4" IPS
6" IPS
8" IPS
200
200
2.7
* Dimensions and weights are approximate and subject to change.
DWG SO-2Last Update
2/23/2010
111
02/13
IPS Molded 90
Pressure Ratings are for water at 73.4۫ F.
Nominal Size PC Dimensions
A x B (in)Weight
(lbs) LIST PRICE Product Code
2.375" 150 0.76 PEI11FMB9K
3.50" 150 3.00 x 5.63 1.83 PEI11FMB9M
4.50" 150 3.09 PEI11FMB9P
6.625" 150 9.75 PEI11FMB9U
8.625" 150 21.4 PEI11FMB9X8" IPS
PEI9FMB9P
6.00 x 12.00
PEI9FMB9U
22
3.00 x 5.75
4.38 x 9.00
4" IPS
6" IPS
PEI9FMB9K
PEI9FMB9M
PEI9FMB9X
200
200
200
0.93
2.93
3.37
9.76
200
200
2.88 x 5.06
3.00 x 6.00
2" IPS
3" IPS
* Dimensions and weights are approximate and subject to change.
DWG SO-3Last Update
2/23/2010
112
02/13
IPS Molded Cap
Pressure Ratings are for water at 73.4۫ F.
Nominal Size PC Dimension (L)
Weight (lbs) LIST PRICE Product Code
2.375" 150 PEI11FMBCAK
3.50" 150 3.94 0.56 PEI11FMBCAM
4.50" 150 1.4 PEI11FMBCAP
6.625" 150 3.74 PEI11FMBCAU
8.625" 150 7.46 PEI11FMBCAX
10.75" 150 23 PEI11FMBCA10F
12.75" 150 35 PEI11FMBCA12F
** FABRICATED
2" IPS
3" IPS
4" IPS
6" IPS
0.26
0.81
2.5
4.79
4.25
PEI9FMBCA10F
PEI9FMBCA12F
8" IPS
** 10" IPS
** 12" IPS 200
24
37
10.50
14.00
200
PEI9FMBCAK
PEI9FMBCAM
PEI9FMBCAP
PEI9FMBCAU
PEI9FMBCAX
4.80
7.75
10.25
12.41 8.62
200
200
200
200
200
* Dimensions and weights are approximate and subject to change.
DWG SO-4Last Update
2/23/2010
113
02/13
IPS Molded ReducerPressure Ratings are for water at 73.4۫ F.
Nominal Size PC DimensionsL x A x B (in)
Weight (lbs) LIST PRICE Product Code
3.50" x 2.375" 150 8.00 x 3.12 x 2.81 0.85 PEI11FMBRMK
4.50" x 2.375" 150 7.75 x 3.06 x 2.81 1.16 PEI11FMBRPK
4.50" x 3.50" 150 7.88 x 3.12 x 3.00 1.46 PEI11FMBRPM
6.625" x 4.50" 150 3.22 PEI11FMBRUP
8.625" x 6.625" 150 5.58 PEI11FMBRXU
10.75" x 8.625" 150 16.5 PEI11FMBR10X
12.75" x 10.75" 150 25.38 PEI11FMBR121029.62
4.95 x 4.69 x 10.84
6.00 x 6.00 x 16.00200
PEI9FMBRXU
PEI9FMBR10X
PEI9FMBR1210
PEI9FMBRMK
PEI9FMBRPK
PEI9FMBRPM
PEI9FMBRUP
0.97
1.53
1.73
3.61
10" IPS x 8" IPS
3"IPS x 2" IPS
4" IPSx 2" IPS
200
200
200 7.74
28
12" IPS x 10" IPS
6.88 x 2.94 x 3.00
6.88 x 3.00 x 3.00
4" IPSx 3"IPS
6" IPS x 4"IPS
6.88 x 3.00 x 3.00
4.22 x 3.75 x 9.13
200
200
8" IPS x 6" IPS
200 6.00 x 6.00 x 16.00
* Dimensions and weights are approximate and subject to change.
DWG SO-5Last Update
2/23/2010
114
02/13
IPS Molded TEEPressure Ratings are for water at 73.4۫ F.
Nominal Size PC DimensionsA x B x L (in) Weight (lbs) LIST PRICE Product Code
2.375" 150 1 PEI11FMBTK
3.50" 150 2.6 PEI11FMBTM
4.50" 150 3.87 PEI11FMBTP
6.625" 150 14.13 PEI11FMBTU
8.625" 150 30.51 PEI11FMBTX
2" IPS
3" IPS
4" IPS
6" IPS
8" IPS
PEI9FMBTK
PEI9FMBTM
PEI9FMBTX
PEI9FMBTP
PEI9FMBTU200
200
1.18
3.73
3.91
4.34 x 9.00 x 18.00
6.00 x 12.00 x 24.00
15.97
31
2.90 x 5.60 x 11.20
200
200
200
2.88 x 5.13 x 10.25
3.00 x 6.06 x 12.13
* Dimensions and weights are approximate and subject to change.
DWG SO-6Last Update
2/23/2010
115
02/13
116
02/13
117
02/13