hdlc channel communication system with a … · systems based on pdh and sdh multiplexers,...

2
POWER ENGINEERING PCM30U-OCH is a family of transmission systems based on PDH and SDH multiplexers, transmitting standard telecommunication signals, such as voice, data and Ethernet (bridge) as well as protection relay commands, either in the form of analogue binary commands or in the digital form using various protocols (such as C37.94). In addition, the system provides 50 Hz frequency transmission for specific solutions. Contacts TTC MARCONI s.r.o. Třebohostická 987/5 Prague 10 - 100 00 Czech Republic Phone: +420 234 051 001 Fax: +420 234 814 747 E-mail: [email protected] ttc-marconi.com Fast and reliable communication FLEXIBILITY Modular and scalable SERVICES Teleprotection, Voice and Data SPEED Guaranteed delay not exceeding 2 ms TRANSMISSION SDH, PDH, IP/Ethernet, optical fibre, data RELIABILITY Secured transport, backup options COMMUNICATION SYSTEM WITH A TELEPROTECTION FUNCTION TECHNICAL SPECIFICATIONS Line interface STM-4/STM-1 Synchronization internal, STM, E1 Protection SNCP, MSP-ring Line interface E1 / G.703 Signalization CAS Frame composion G.704 Performance monitoring G.706, (CDC-4) Line code G.703, HDB3 Impedance 120 Ω Synchronization internal, E1, external, T12 E1 / G.703 2 × 12 E1 (per module) Eth 4 × 10/100/1G (per module) Optical interface SFP modules Wavelength 820/1310/1550 nm WDM 1310/1550 nm (1 fiber) Distance up to 180 km E1 over IP Eth 10/100 Sync internal, E1, T12 Encapsulation AAL1, CESoPSN. Framing unstruct, struct Nx64/CAS Tributary interface E1 external/internal SDH PDH Optical interface for PDH or SDH Tributary interfaces Ethernet Nominal voltage 220, 110 VDC Input treshold 158-170 / 79-85 VDC Input current 20 - 25 mA Output switch. current 2 (4) ADC Channels per module 10 / 4 Transmission time 1 - 9 ms General IEE C37.94 ABB REL551, RED670 Siemens 7SD5111, 7SD512, 7SD523, 7SD61 SEL SEL311L Wavelength 820 nm / 1310 nm Input voltage 57.7 / 100 V RMS Output voltage (2 kΩ load) 27 - 50 / 54 - 100 Vrms Nominal voltage 60 Vrms FXO FXS (CB / LB) Coding G.711 / A law Max. loop impedance 1400 Ω 4w / 2w with E&M ISDN remote S0 FXS, 4w with galvanic separation Data channel interfaces RS232/V.28, RS422/V.11, RS- 485-4w, RS485-2w, V.35, V.36, RS449, RS530, optical 820 nm Types and bit rates Sync. or async. up to 64 kbit/s, Nx 64 kbit/s, N = 2, 4, 8 Ethernet L1 Nx 64 kbit/s, N = 1 to 30 Nx VC12, Nx VC3 Codirectional 64 kbit/s G.703 Local Windows oriented, IP access Network SNMP EC 60870-5-104 Central TopoNet (HP, LINUX oriented) Server backup, NBI interface, workstations Windows, IP access Nx 64 kbit/s, N = 1 to 30 Nx VC12, Nx VC3 10 / 100 / 1000 L2 switch point to point Line Interfaces Teleprotection Interfaces 2 w 50/60 Hz (DZL-2) Digital teleprotection 4 w 50/60 Hz Commands Voice and Data Interfaces Data Voice Management, Ethernet L2 Management Ethernet L2 ID: 48591254 VAT ID: CZ48591254 Mode 2 x 1-pair (1xE1 + 1xEth 5 Mbit/s) Modulation 16/32 TC PAM HDLC channel nx 64 kbit/s (for n=3-32) SHDSL PIPELINES TRANSPORT INFRASTRUCTURE MANUFACTURING SYSTEM SECURITY APPLICATIONS PCM30U-OCH

Upload: others

Post on 25-Mar-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: HDLC channel COMMUNICATION SYSTEM WITH A … · systems based on PDH and SDH multiplexers, transmitting standard telecommunication signals, such as voice, data and Ethernet (bridge)

POWER ENGINEERING

PCM30U-OCH is a family of transmission systems based on PDH and SDH multiplexers, transmitting standard telecommunication signals, such as voice, data and Ethernet (bridge) as well as protection relay commands, either in the form of analogue binary commands or in the digital form using various protocols (such as C37.94). In addition, the system provides 50 Hz frequency transmission for specific solutions.

ContactsTTC MARCONI s.r.o.

Třebohostická 987/5Prague 10 - 100 00Czech Republic

Phone: +420 234 051 001Fax: +420 234 814 747E-mail: [email protected]

ttc-marconi.com Fast and reliable communication

FLEXIBILITYModular and scalableSERVICESTeleprotection, Voice and DataSPEEDGuaranteed delay not exceeding 2 msTRANSMISSIONSDH, PDH, IP/Ethernet, optical fibre, dataRELIABILITYSecured transport, backup options

COMMUNICATION SYSTEM WITH A TELEPROTECTION FUNCTION

TECHNICAL SPECIFICATIONS

Line interface STM-4/STM-1Synchronization internal, STM, E1Protection SNCP, MSP-ring

Line interface E1 / G.703Signalization CASFrame composion G.704Performance monitoring G.706, (CDC-4)Line code G.703, HDB3Impedance 120 ΩSynchronization internal, E1, external, T12

E1 / G.703 2 × 12 E1 (per module)Eth 4 × 10/100/1G (per module)

Optical interface SFP modulesWavelength 820/1310/1550 nm

WDM 1310/1550 nm (1 fiber)Distance up to 180 km

E1 over IPEth 10/100Sync internal, E1, T12Encapsulation AAL1, CESoPSN.Framing unstruct, struct Nx64/CASTributary interfaceE1 external/internal

SDH PDH

Optical interface for PDH or SDH

Tributary interfaces

Ethernet

Nominal voltage 220, 110 VDCInput treshold 158-170 / 79-85 VDCInput current 20 - 25 mAOutput switch. current 2 (4) ADCChannels per module 10 / 4Transmission time 1 - 9 ms

General IEE C37.94ABB REL551, RED670Siemens 7SD5111, 7SD512, 7SD523, 7SD61SEL SEL311LWavelength 820 nm / 1310 nm

Input voltage 57.7 / 100 V RMSOutput voltage (2 kΩ load) 27 - 50 / 54 - 100 VrmsNominal voltage 60 Vrms

FXOFXS (CB / LB)Coding G.711 / A lawMax. loop impedance 1400 Ω4w / 2w with E&MISDN remote S0FXS, 4w with galvanic separation

Data channel interfaces RS232/V.28, RS422/V.11, RS-485-4w, RS485-2w, V.35, V.36, RS449, RS530, optical 820 nm

Types and bit rates Sync. or async. up to 64 kbit/s, Nx 64 kbit/s, N = 2, 4, 8

Ethernet L1 Nx 64 kbit/s, N = 1 to 30Nx VC12, Nx VC3

Codirectional 64 kbit/s G.703

Local Windows oriented, IP accessNetwork SNMP

EC 60870-5-104Central TopoNet (HP, LINUX oriented)

Server backup, NBI interface, workstations Windows, IP access

Nx 64 kbit/s, N = 1 to 30Nx VC12, Nx VC310 / 100 / 1000L2 switchpoint to point

Line Interfaces

Teleprotection Interfaces

2 w 50/60 Hz (DZL-2)

Digital teleprotection

4 w 50/60 Hz

Commands

Voice and Data InterfacesData Voice

Management, Ethernet L2Management Ethernet L2

ID: 48591254VAT ID: CZ48591254

Mode 2 x 1-pair(1xE1 + 1xEth 5 Mbit/s)

Modulation 16/32 TC PAMHDLC channel nx 64 kbit/s (for n=3-32)

SHDSL

PIPELINES TRANSPORTINFRASTRUCTURE

MANUFACTURINGSYSTEM

SECURITYAPPLICATIONS

PCM30U-OCH

Page 2: HDLC channel COMMUNICATION SYSTEM WITH A … · systems based on PDH and SDH multiplexers, transmitting standard telecommunication signals, such as voice, data and Ethernet (bridge)

TYPES AND FUNCTIONS APPLICATIONS

Offers maximum versatility and complex solution up to 80 TP commands capacity in the subrack. Transmission via optical fibres E1, STM1/4, SM/MM, IP / FE or metallic cable.

Offers a spatially and cost-effective solution in less complex applications. Transmission of 20 TP commands in the subrack via E1, optical fibers SM/MM, IP / FE or metallic cable.

Systems designated for only a certain category of services with maximum cost savings (i.e. only teleprotection or voice / data transfers). The capacity for teleprotection is 10 commands within E1 transmission, SM / MM optical fibers, IP / FE or metallic cable.

Offers end-user services with TDM or IP capabilities. The main applications are intended for transmission from RTU (serial data / voice, Ethernet IP L2 / VLAN services) to central nodes through IP, TDM or hybrid networks. Another type in the BOX solution is the SDH system for E1 transmission services or Ethernet.

6U/19“ - „all in one solution“

3U/19“ - „economic solution“

1U/19“ - „specific solution“

BOX - „terminal solution“

KEY BENEFITS High flexibility and reliability. The PCM30U-OCH solution enables cost optimization in line with individual functional variants in view of the specific needs of the customer. The system is focused on high reliability for critical signal transmissions.

Full compatibility with analog and digital protection systems of third parties provides networking for optical interfaces of differential protection systems ABB, SEL, SIEMENS differential protection system.

Protecting future investments is ensured by the open modularity of PCM30U-OCH system, while the technology development and the need to concentrate a wide range of services do not limit further development of customer’s network to one supplier.

fast and reliable command transmission remote or central administration of supported network elementsthe ability to fast backup the channel-level system without interruptionenhanced EMC resistance and low emission

BASIC FEATURES

TELEPROTECTION SERVICESDifferential (C37.94) and distance (binary commands) protection

OPEN MODULARITYFuture investment protection: the system enables collaboration with third-party devicesProgressive network development at expanding the services providedCustomer solutions for emerging user needs

BACKUP OPTIONSLine signal protection (the cheapest solution, 50 ms switching time)Path signal protection (dual mux in one subrack, 5 ms switching time)Double system protection (high reliability, used for power plant - substation connection)

SUPPORT OF VARIOUS TOPOLOGICAL STRUCTURESMesh, Ring, Midspan, Terminal, T-Line

MULTIFUNCTIONAL SOLUTION (SERVICES AND TRANSPORT)

Voice & Data

Ethernet

E1, opto

50 Hz transmission

SDH

Diff. protection

Binary commands

Voice & DataDataVoice & Data

EthernetEthernetEthernet

E1, opto E1, opto E1, opto

50 Hz transmission

Diff. protectionDiff. protectionDiff. protection

Binary commandsBinary commands

TELEPROTECTION

1U - SGNU 1U-TP103U - OCH

6U - OCH

Voice & DataE1

EthernetEthernet

SDH E1, opto

BOX - SDH BOX - SGN

Diff. protection

TELEPROTECTIONCMD / BIN

2W / 4W analog 50 Hz protective device

Digital protective device (C37.94)

VOICE / DATASerial data

2dr / 4dr E&M

FXO

FXS (CB, LB Magneto)

Ethernet

E1

PCM - OCHPCM - OCH

O.F.

RR

IP

PDH, SDH

TELEPROTECTION

VOICE / DATA